diff options
Diffstat (limited to 'nixos/modules/installer/cd-dvd')
12 files changed, 181 insertions, 443 deletions
diff --git a/nixos/modules/installer/cd-dvd/installation-cd-base.nix b/nixos/modules/installer/cd-dvd/installation-cd-base.nix index 6c7ea293e8a..aecb65b8c57 100644 --- a/nixos/modules/installer/cd-dvd/installation-cd-base.nix +++ b/nixos/modules/installer/cd-dvd/installation-cd-base.nix @@ -30,5 +30,16 @@ with lib; # Add Memtest86+ to the CD. boot.loader.grub.memtest86.enable = true; + boot.postBootCommands = '' + for o in $(</proc/cmdline); do + case "$o" in + live.nixos.passwd=*) + set -- $(IFS==; echo $o) + echo "nixos:$2" | ${pkgs.shadow}/bin/chpasswd + ;; + esac + done + ''; + system.stateVersion = mkDefault "18.03"; } diff --git a/nixos/modules/installer/cd-dvd/installation-cd-graphical-gnome.nix b/nixos/modules/installer/cd-dvd/installation-cd-graphical-gnome.nix index 8c98691116d..12ad8a4ae00 100644 --- a/nixos/modules/installer/cd-dvd/installation-cd-graphical-gnome.nix +++ b/nixos/modules/installer/cd-dvd/installation-cd-graphical-gnome.nix @@ -9,7 +9,14 @@ with lib; isoImage.edition = "gnome"; - services.xserver.desktopManager.gnome3.enable = true; + services.xserver.desktopManager.gnome = { + # Add firefox to favorite-apps + favoriteAppsOverride = '' + [org.gnome.shell] + favorite-apps=[ 'firefox.desktop', 'org.gnome.Geary.desktop', 'org.gnome.Calendar.desktop', 'org.gnome.Music.desktop', 'org.gnome.Photos.desktop', 'org.gnome.Nautilus.desktop' ] + ''; + enable = true; + }; services.xserver.displayManager = { gdm = { diff --git a/nixos/modules/installer/cd-dvd/iso-image.nix b/nixos/modules/installer/cd-dvd/iso-image.nix index 405fbfa10db..d94af0b5bf7 100644 --- a/nixos/modules/installer/cd-dvd/iso-image.nix +++ b/nixos/modules/installer/cd-dvd/iso-image.nix @@ -143,6 +143,13 @@ let LINUX /boot/${config.system.boot.loader.kernelFile} APPEND init=${config.system.build.toplevel}/init ${toString config.boot.kernelParams} loglevel=7 INITRD /boot/${config.system.boot.loader.initrdFile} + + # A variant to boot with a serial console enabled + LABEL boot-serial + MENU LABEL NixOS ${config.system.nixos.label}${config.isoImage.appendToMenuLabel} (serial console=ttyS0,115200n8) + LINUX /boot/${config.system.boot.loader.kernelFile} + APPEND init=${config.system.build.toplevel}/init ${toString config.boot.kernelParams} console=ttyS0,115200n8 + INITRD /boot/${config.system.boot.loader.initrdFile} ''; isolinuxMemtest86Entry = '' @@ -155,12 +162,14 @@ let isolinuxCfg = concatStringsSep "\n" ([ baseIsolinuxCfg ] ++ optional config.boot.loader.grub.memtest86.enable isolinuxMemtest86Entry); + refindBinary = if targetArch == "x64" || targetArch == "aa64" then "refind_${targetArch}.efi" else null; + # Setup instructions for rEFInd. refind = - if targetArch == "x64" then + if refindBinary != null then '' # Adds rEFInd to the ISO. - cp -v ${pkgs.refind}/share/refind/refind_x64.efi $out/EFI/boot/ + cp -v ${pkgs.refind}/share/refind/${refindBinary} $out/EFI/boot/ '' else "# No refind for ${targetArch}" @@ -173,13 +182,32 @@ let # Menu configuration # + # Search using a "marker file" + search --set=root --file /EFI/nixos-installer-image + insmod gfxterm insmod png set gfxpayload=keep + set gfxmode=${concatStringsSep "," [ + # GRUB will use the first valid mode listed here. + # `auto` will sometimes choose the smallest valid mode it detects. + # So instead we'll list a lot of possibly valid modes :/ + #"3840x2160" + #"2560x1440" + "1920x1080" + "1366x768" + "1280x720" + "1024x768" + "800x600" + "auto" + ]} # Fonts can be loaded? # (This font is assumed to always be provided as a fallback by NixOS) - if loadfont (hd0)/EFI/boot/unicode.pf2; then + if loadfont (\$root)/EFI/boot/unicode.pf2; then + set with_fonts=true + fi + if [ "\$textmode" != "true" -a "\$with_fonts" == "true" ]; then # Use graphical term, it can be either with background image or a theme. # input is "console", while output is "gfxterm". # This enables "serial" input and output only when possible. @@ -200,11 +228,11 @@ let ${ # When there is a theme configured, use it, otherwise use the background image. if config.isoImage.grubTheme != null then '' # Sets theme. - set theme=(hd0)/EFI/boot/grub-theme/theme.txt + set theme=(\$root)/EFI/boot/grub-theme/theme.txt # Load theme fonts - $(find ${config.isoImage.grubTheme} -iname '*.pf2' -printf "loadfont (hd0)/EFI/boot/grub-theme/%P\n") + $(find ${config.isoImage.grubTheme} -iname '*.pf2' -printf "loadfont (\$root)/EFI/boot/grub-theme/%P\n") '' else '' - if background_image (hd0)/EFI/boot/efi-background.png; then + if background_image (\$root)/EFI/boot/efi-background.png; then # Black background means transparent background when there # is a background image set... This seems undocumented :( set color_normal=black/black @@ -221,9 +249,15 @@ let # Notes about grub: # * Yes, the grubMenuCfg has to be repeated in all submenus. Otherwise you # will get white-on-black console-like text on sub-menus. *sigh* - efiDir = pkgs.runCommand "efi-directory" {} '' + efiDir = pkgs.runCommand "efi-directory" { + nativeBuildInputs = [ pkgs.buildPackages.grub2_efi ]; + strictDeps = true; + } '' mkdir -p $out/EFI/boot/ + # Add a marker so GRUB can find the filesystem. + touch $out/EFI/nixos-installer-image + # ALWAYS required modules. MODULES="fat iso9660 part_gpt part_msdos \ normal boot linux configfile loopback chain halt \ @@ -251,12 +285,14 @@ let # Make our own efi program, we can't rely on "grub-install" since it seems to # probe for devices, even with --skip-fs-probe. - ${grubPkgs.grub2_efi}/bin/grub-mkimage -o $out/EFI/boot/boot${targetArch}.efi -p /EFI/boot -O ${grubPkgs.grub2_efi.grubTarget} \ + grub-mkimage --directory=${grubPkgs.grub2_efi}/lib/grub/${grubPkgs.grub2_efi.grubTarget} -o $out/EFI/boot/boot${targetArch}.efi -p /EFI/boot -O ${grubPkgs.grub2_efi.grubTarget} \ $MODULES cp ${grubPkgs.grub2_efi}/share/grub/unicode.pf2 $out/EFI/boot/ cat <<EOF > $out/EFI/boot/grub.cfg + set with_fonts=false + set textmode=false # If you want to use serial for "terminal_*" commands, you need to set one up: # Example manual configuration: # → serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1 @@ -266,8 +302,28 @@ let export with_serial clear set timeout=10 + + # This message will only be viewable when "gfxterm" is not used. + echo "" + echo "Loading graphical boot menu..." + echo "" + echo "Press 't' to use the text boot menu on this console..." + echo "" + ${grubMenuCfg} + hiddenentry 'Text mode' --hotkey 't' { + loadfont (\$root)/EFI/boot/unicode.pf2 + set textmode=true + terminal_output gfxterm console + } + hiddenentry 'GUI mode' --hotkey 'g' { + $(find ${config.isoImage.grubTheme} -iname '*.pf2' -printf "loadfont (\$root)/EFI/boot/grub-theme/%P\n") + set textmode=false + terminal_output gfxterm + } + + # If the parameter iso_path is set, append the findiso parameter to the kernel # line. We need this to allow the nixos iso to be booted from grub directly. if [ \''${iso_path} ] ; then @@ -330,11 +386,17 @@ let } } - menuentry 'rEFInd' --class refind { - # UUID is hard-coded in the derivation. + ${lib.optionalString (refindBinary != null) '' + # GRUB apparently cannot do "chainloader" operations on "CD". + if [ "\$root" != "cd0" ]; then + # Force root to be the FAT partition + # Otherwise it breaks rEFInd's boot search --set=root --no-floppy --fs-uuid 1234-5678 - chainloader (\$root)/EFI/boot/refind_x64.efi - } + menuentry 'rEFInd' --class refind { + chainloader (\$root)/EFI/boot/${refindBinary} + } + fi + ''} menuentry 'Firmware Setup' --class settings { fwsetup clear @@ -350,7 +412,10 @@ let ${refind} ''; - efiImg = pkgs.runCommand "efi-image_eltorito" { buildInputs = [ pkgs.mtools pkgs.libfaketime ]; } + efiImg = pkgs.runCommand "efi-image_eltorito" { + nativeBuildInputs = [ pkgs.buildPackages.mtools pkgs.buildPackages.libfaketime pkgs.buildPackages.dosfstools ]; + strictDeps = true; + } # Be careful about determinism: du --apparent-size, # dates (cp -p, touch, mcopy -m, faketime for label), IDs (mkfs.vfat -i) '' @@ -359,9 +424,12 @@ let mkdir ./boot cp -p "${config.boot.kernelPackages.kernel}/${config.system.boot.loader.kernelFile}" \ "${config.system.build.initialRamdisk}/${config.system.boot.loader.initrdFile}" ./boot/ - touch --date=@0 ./EFI ./boot - usage_size=$(du -sb --apparent-size . | tr -cd '[:digit:]') + # Rewrite dates for everything in the FS + find . -exec touch --date=2000-01-01 {} + + + # Round up to the nearest multiple of 1MB, for more deterministic du output + usage_size=$(( $(du -s --block-size=1M --apparent-size . | tr -cd '[:digit:]') * 1024 * 1024 )) # Make the image 110% as big as the files need to make up for FAT overhead image_size=$(( ($usage_size * 110) / 100 )) # Make the image fit blocks of 1M @@ -370,10 +438,19 @@ let echo "Usage size: $usage_size" echo "Image size: $image_size" truncate --size=$image_size "$out" - ${pkgs.libfaketime}/bin/faketime "2000-01-01 00:00:00" ${pkgs.dosfstools}/sbin/mkfs.vfat -i 12345678 -n EFIBOOT "$out" - mcopy -psvm -i "$out" ./EFI ./boot :: + faketime "2000-01-01 00:00:00" mkfs.vfat -i 12345678 -n EFIBOOT "$out" + + # Force a fixed order in mcopy for better determinism, and avoid file globbing + for d in $(find EFI boot -type d | sort); do + faketime "2000-01-01 00:00:00" mmd -i "$out" "::/$d" + done + + for f in $(find EFI boot -type f | sort); do + mcopy -pvm -i "$out" "$f" "::/$f" + done + # Verify the FAT partition. - ${pkgs.dosfstools}/sbin/fsck.vfat -vn "$out" + fsck.vfat -vn "$out" ''; # */ # Name used by UEFI for architectures. @@ -382,6 +459,8 @@ let "ia32" else if pkgs.stdenv.isx86_64 then "x64" + else if pkgs.stdenv.isAarch32 then + "arm" else if pkgs.stdenv.isAarch64 then "aa64" else @@ -418,7 +497,12 @@ in }; isoImage.squashfsCompression = mkOption { - default = "xz -Xdict-size 100%"; + default = with pkgs.stdenv.targetPlatform; "xz -Xdict-size 100% " + + lib.optionalString (isx86_32 || isx86_64) "-Xbcj x86" + # Untested but should also reduce size for these platforms + + lib.optionalString (isAarch32 || isAarch64) "-Xbcj arm" + + lib.optionalString (isPowerPC) "-Xbcj powerpc" + + lib.optionalString (isSparc) "-Xbcj sparc"; description = '' Compression settings to use for the squashfs nix store. ''; @@ -606,6 +690,12 @@ in "upperdir=/nix/.rw-store/store" "workdir=/nix/.rw-store/work" ]; + + depends = [ + "/nix/.ro-store" + "/nix/.rw-store/store" + "/nix/.rw-store/work" + ]; }; boot.initrd.availableKernelModules = [ "squashfs" "iso9660" "uas" "overlay" ]; diff --git a/nixos/modules/installer/cd-dvd/sd-image-aarch64-new-kernel.nix b/nixos/modules/installer/cd-dvd/sd-image-aarch64-new-kernel.nix index 2882fbcc730..a669d61571f 100644 --- a/nixos/modules/installer/cd-dvd/sd-image-aarch64-new-kernel.nix +++ b/nixos/modules/installer/cd-dvd/sd-image-aarch64-new-kernel.nix @@ -1,7 +1,14 @@ -{ pkgs, ... }: - +{ config, ... }: { - imports = [ ./sd-image-aarch64.nix ]; - - boot.kernelPackages = pkgs.linuxPackages_latest; + imports = [ + ../sd-card/sd-image-aarch64-new-kernel-installer.nix + ]; + config = { + warnings = [ + '' + .../cd-dvd/sd-image-aarch64-new-kernel.nix is deprecated and will eventually be removed. + Please switch to .../sd-card/sd-image-aarch64-new-kernel-installer.nix, instead. + '' + ]; + }; } diff --git a/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix b/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix index bef6cd2fb5a..76c1509b8f7 100644 --- a/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix +++ b/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix @@ -1,60 +1,14 @@ -# To build, use: -# nix-build nixos -I nixos-config=nixos/modules/installer/cd-dvd/sd-image-aarch64.nix -A config.system.build.sdImage -{ config, lib, pkgs, ... }: - +{ config, ... }: { imports = [ - ../../profiles/base.nix - ../../profiles/installation-device.nix - ./sd-image.nix + ../sd-card/sd-image-aarch64-installer.nix ]; - - boot.loader.grub.enable = false; - boot.loader.generic-extlinux-compatible.enable = true; - - boot.consoleLogLevel = lib.mkDefault 7; - - # The serial ports listed here are: - # - ttyS0: for Tegra (Jetson TX1) - # - ttyAMA0: for QEMU's -machine virt - # Also increase the amount of CMA to ensure the virtual console on the RPi3 works. - boot.kernelParams = ["cma=32M" "console=ttyS0,115200n8" "console=ttyAMA0,115200n8" "console=tty0"]; - - boot.initrd.availableKernelModules = [ - # Allows early (earlier) modesetting for the Raspberry Pi - "vc4" "bcm2835_dma" "i2c_bcm2835" - # Allows early (earlier) modesetting for Allwinner SoCs - "sun4i_drm" "sun8i_drm_hdmi" "sun8i_mixer" - ]; - - sdImage = { - populateFirmwareCommands = let - configTxt = pkgs.writeText "config.txt" '' - kernel=u-boot-rpi3.bin - - # Boot in 64-bit mode. - arm_control=0x200 - - # U-Boot used to need this to work, regardless of whether UART is actually used or not. - # TODO: check when/if this can be removed. - enable_uart=1 - - # Prevent the firmware from smashing the framebuffer setup done by the mainline kernel - # when attempting to show low-voltage or overtemperature warnings. - avoid_warnings=1 - ''; - in '' - (cd ${pkgs.raspberrypifw}/share/raspberrypi/boot && cp bootcode.bin fixup*.dat start*.elf $NIX_BUILD_TOP/firmware/) - cp ${pkgs.ubootRaspberryPi3_64bit}/u-boot.bin firmware/u-boot-rpi3.bin - cp ${configTxt} firmware/config.txt - ''; - populateRootCommands = '' - mkdir -p ./files/boot - ${config.boot.loader.generic-extlinux-compatible.populateCmd} -c ${config.system.build.toplevel} -d ./files/boot - ''; + config = { + warnings = [ + '' + .../cd-dvd/sd-image-aarch64.nix is deprecated and will eventually be removed. + Please switch to .../sd-card/sd-image-aarch64-installer.nix, instead. + '' + ]; }; - - # the installation media is also the installation target, - # so we don't want to provide the installation configuration.nix. - installer.cloneConfig = false; } diff --git a/nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix b/nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix index d2ba611532e..6ee0eb9e9b8 100644 --- a/nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix +++ b/nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix @@ -1,57 +1,14 @@ -# To build, use: -# nix-build nixos -I nixos-config=nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix -A config.system.build.sdImage -{ config, lib, pkgs, ... }: - +{ config, ... }: { imports = [ - ../../profiles/base.nix - ../../profiles/installation-device.nix - ./sd-image.nix + ../sd-card/sd-image-armv7l-multiplatform-installer.nix ]; - - boot.loader.grub.enable = false; - boot.loader.generic-extlinux-compatible.enable = true; - - boot.consoleLogLevel = lib.mkDefault 7; - boot.kernelPackages = pkgs.linuxPackages_latest; - # The serial ports listed here are: - # - ttyS0: for Tegra (Jetson TK1) - # - ttymxc0: for i.MX6 (Wandboard) - # - ttyAMA0: for Allwinner (pcDuino3 Nano) and QEMU's -machine virt - # - ttyO0: for OMAP (BeagleBone Black) - # - ttySAC2: for Exynos (ODROID-XU3) - boot.kernelParams = ["console=ttyS0,115200n8" "console=ttymxc0,115200n8" "console=ttyAMA0,115200n8" "console=ttyO0,115200n8" "console=ttySAC2,115200n8" "console=tty0"]; - - sdImage = { - populateFirmwareCommands = let - configTxt = pkgs.writeText "config.txt" '' - # Prevent the firmware from smashing the framebuffer setup done by the mainline kernel - # when attempting to show low-voltage or overtemperature warnings. - avoid_warnings=1 - - [pi2] - kernel=u-boot-rpi2.bin - - [pi3] - kernel=u-boot-rpi3.bin - - # U-Boot used to need this to work, regardless of whether UART is actually used or not. - # TODO: check when/if this can be removed. - enable_uart=1 - ''; - in '' - (cd ${pkgs.raspberrypifw}/share/raspberrypi/boot && cp bootcode.bin fixup*.dat start*.elf $NIX_BUILD_TOP/firmware/) - cp ${pkgs.ubootRaspberryPi2}/u-boot.bin firmware/u-boot-rpi2.bin - cp ${pkgs.ubootRaspberryPi3_32bit}/u-boot.bin firmware/u-boot-rpi3.bin - cp ${configTxt} firmware/config.txt - ''; - populateRootCommands = '' - mkdir -p ./files/boot - ${config.boot.loader.generic-extlinux-compatible.populateCmd} -c ${config.system.build.toplevel} -d ./files/boot - ''; + config = { + warnings = [ + '' + .../cd-dvd/sd-image-armv7l-multiplatform.nix is deprecated and will eventually be removed. + Please switch to .../sd-card/sd-image-armv7l-multiplatform-installer.nix, instead. + '' + ]; }; - - # the installation media is also the installation target, - # so we don't want to provide the installation configuration.nix. - installer.cloneConfig = false; } diff --git a/nixos/modules/installer/cd-dvd/sd-image-raspberrypi.nix b/nixos/modules/installer/cd-dvd/sd-image-raspberrypi.nix index 40a01f96177..747440ba9c6 100644 --- a/nixos/modules/installer/cd-dvd/sd-image-raspberrypi.nix +++ b/nixos/modules/installer/cd-dvd/sd-image-raspberrypi.nix @@ -1,46 +1,14 @@ -# To build, use: -# nix-build nixos -I nixos-config=nixos/modules/installer/cd-dvd/sd-image-raspberrypi.nix -A config.system.build.sdImage -{ config, lib, pkgs, ... }: - +{ config, ... }: { imports = [ - ../../profiles/base.nix - ../../profiles/installation-device.nix - ./sd-image.nix + ../sd-card/sd-image-raspberrypi-installer.nix ]; - - boot.loader.grub.enable = false; - boot.loader.generic-extlinux-compatible.enable = true; - - boot.consoleLogLevel = lib.mkDefault 7; - boot.kernelPackages = pkgs.linuxPackages_rpi1; - - sdImage = { - populateFirmwareCommands = let - configTxt = pkgs.writeText "config.txt" '' - # Prevent the firmware from smashing the framebuffer setup done by the mainline kernel - # when attempting to show low-voltage or overtemperature warnings. - avoid_warnings=1 - - [pi0] - kernel=u-boot-rpi0.bin - - [pi1] - kernel=u-boot-rpi1.bin - ''; - in '' - (cd ${pkgs.raspberrypifw}/share/raspberrypi/boot && cp bootcode.bin fixup*.dat start*.elf $NIX_BUILD_TOP/firmware/) - cp ${pkgs.ubootRaspberryPiZero}/u-boot.bin firmware/u-boot-rpi0.bin - cp ${pkgs.ubootRaspberryPi}/u-boot.bin firmware/u-boot-rpi1.bin - cp ${configTxt} firmware/config.txt - ''; - populateRootCommands = '' - mkdir -p ./files/boot - ${config.boot.loader.generic-extlinux-compatible.populateCmd} -c ${config.system.build.toplevel} -d ./files/boot - ''; + config = { + warnings = [ + '' + .../cd-dvd/sd-image-raspberrypi.nix is deprecated and will eventually be removed. + Please switch to .../sd-card/sd-image-raspberrypi-installer.nix, instead. + '' + ]; }; - - # the installation media is also the installation target, - # so we don't want to provide the installation configuration.nix. - installer.cloneConfig = false; } diff --git a/nixos/modules/installer/cd-dvd/sd-image-raspberrypi4.nix b/nixos/modules/installer/cd-dvd/sd-image-raspberrypi4.nix deleted file mode 100644 index 79c835dc390..00000000000 --- a/nixos/modules/installer/cd-dvd/sd-image-raspberrypi4.nix +++ /dev/null @@ -1,38 +0,0 @@ -# To build, use: -# nix-build nixos -I nixos-config=nixos/modules/installer/cd-dvd/sd-image-raspberrypi4.nix -A config.system.build.sdImage -{ config, lib, pkgs, ... }: - -{ - imports = [ - ../../profiles/base.nix - ../../profiles/installation-device.nix - ./sd-image.nix - ]; - - boot.loader.grub.enable = false; - boot.loader.raspberryPi.enable = true; - boot.loader.raspberryPi.version = 4; - boot.kernelPackages = pkgs.linuxPackages_rpi4; - - boot.consoleLogLevel = lib.mkDefault 7; - - sdImage = { - firmwareSize = 128; - firmwarePartitionName = "NIXOS_BOOT"; - # This is a hack to avoid replicating config.txt from boot.loader.raspberryPi - populateFirmwareCommands = - "${config.system.build.installBootLoader} ${config.system.build.toplevel} -d ./firmware"; - # As the boot process is done entirely in the firmware partition. - populateRootCommands = ""; - }; - - fileSystems."/boot/firmware" = { - # This effectively "renames" the loaOf entry set in sd-image.nix - mountPoint = "/boot"; - neededForBoot = true; - }; - - # the installation media is also the installation target, - # so we don't want to provide the installation configuration.nix. - installer.cloneConfig = false; -} diff --git a/nixos/modules/installer/cd-dvd/sd-image.nix b/nixos/modules/installer/cd-dvd/sd-image.nix index ddad1116c94..e2d6dcb3fe3 100644 --- a/nixos/modules/installer/cd-dvd/sd-image.nix +++ b/nixos/modules/installer/cd-dvd/sd-image.nix @@ -1,232 +1,14 @@ -# This module creates a bootable SD card image containing the given NixOS -# configuration. The generated image is MBR partitioned, with a FAT -# /boot/firmware partition, and ext4 root partition. The generated image -# is sized to fit its contents, and a boot script automatically resizes -# the root partition to fit the device on the first boot. -# -# The firmware partition is built with expectation to hold the Raspberry -# Pi firmware and bootloader, and be removed and replaced with a firmware -# build for the target SoC for other board families. -# -# The derivation for the SD image will be placed in -# config.system.build.sdImage - -{ config, lib, pkgs, ... }: - -with lib; - -let - rootfsImage = pkgs.callPackage ../../../lib/make-ext4-fs.nix ({ - inherit (config.sdImage) storePaths; - compressImage = true; - populateImageCommands = config.sdImage.populateRootCommands; - volumeLabel = "NIXOS_SD"; - } // optionalAttrs (config.sdImage.rootPartitionUUID != null) { - uuid = config.sdImage.rootPartitionUUID; - }); -in +{ config, ... }: { imports = [ - (mkRemovedOptionModule [ "sdImage" "bootPartitionID" ] "The FAT partition for SD image now only holds the Raspberry Pi firmware files. Use firmwarePartitionID to configure that partition's ID.") - (mkRemovedOptionModule [ "sdImage" "bootSize" ] "The boot files for SD image have been moved to the main ext4 partition. The FAT partition now only holds the Raspberry Pi firmware files. Changing its size may not be required.") + ../sd-card/sd-image.nix ]; - - options.sdImage = { - imageName = mkOption { - default = "${config.sdImage.imageBaseName}-${config.system.nixos.label}-${pkgs.stdenv.hostPlatform.system}.img"; - description = '' - Name of the generated image file. - ''; - }; - - imageBaseName = mkOption { - default = "nixos-sd-image"; - description = '' - Prefix of the name of the generated image file. - ''; - }; - - storePaths = mkOption { - type = with types; listOf package; - example = literalExample "[ pkgs.stdenv ]"; - description = '' - Derivations to be included in the Nix store in the generated SD image. - ''; - }; - - firmwarePartitionID = mkOption { - type = types.str; - default = "0x2178694e"; - description = '' - Volume ID for the /boot/firmware partition on the SD card. This value - must be a 32-bit hexadecimal number. - ''; - }; - - firmwarePartitionName = mkOption { - type = types.str; - default = "FIRMWARE"; - description = '' - Name of the filesystem which holds the boot firmware. - ''; - }; - - rootPartitionUUID = mkOption { - type = types.nullOr types.str; - default = null; - example = "14e19a7b-0ae0-484d-9d54-43bd6fdc20c7"; - description = '' - UUID for the filesystem on the main NixOS partition on the SD card. - ''; - }; - - firmwareSize = mkOption { - type = types.int; - # As of 2019-08-18 the Raspberry pi firmware + u-boot takes ~18MiB - default = 30; - description = '' - Size of the /boot/firmware partition, in megabytes. - ''; - }; - - populateFirmwareCommands = mkOption { - example = literalExample "'' cp \${pkgs.myBootLoader}/u-boot.bin firmware/ ''"; - description = '' - Shell commands to populate the ./firmware directory. - All files in that directory are copied to the - /boot/firmware partition on the SD image. - ''; - }; - - populateRootCommands = mkOption { - example = literalExample "''\${config.boot.loader.generic-extlinux-compatible.populateCmd} -c \${config.system.build.toplevel} -d ./files/boot''"; - description = '' - Shell commands to populate the ./files directory. - All files in that directory are copied to the - root (/) partition on the SD image. Use this to - populate the ./files/boot (/boot) directory. - ''; - }; - - compressImage = mkOption { - type = types.bool; - default = true; - description = '' - Whether the SD image should be compressed using - <command>zstd</command>. - ''; - }; - - }; - config = { - fileSystems = { - "/boot/firmware" = { - device = "/dev/disk/by-label/${config.sdImage.firmwarePartitionName}"; - fsType = "vfat"; - # Alternatively, this could be removed from the configuration. - # The filesystem is not needed at runtime, it could be treated - # as an opaque blob instead of a discrete FAT32 filesystem. - options = [ "nofail" "noauto" ]; - }; - "/" = { - device = "/dev/disk/by-label/NIXOS_SD"; - fsType = "ext4"; - }; - }; - - sdImage.storePaths = [ config.system.build.toplevel ]; - - system.build.sdImage = pkgs.callPackage ({ stdenv, dosfstools, e2fsprogs, - mtools, libfaketime, utillinux, zstd }: stdenv.mkDerivation { - name = config.sdImage.imageName; - - nativeBuildInputs = [ dosfstools e2fsprogs mtools libfaketime utillinux zstd ]; - - inherit (config.sdImage) compressImage; - - buildCommand = '' - mkdir -p $out/nix-support $out/sd-image - export img=$out/sd-image/${config.sdImage.imageName} - - echo "${pkgs.stdenv.buildPlatform.system}" > $out/nix-support/system - if test -n "$compressImage"; then - echo "file sd-image $img.zst" >> $out/nix-support/hydra-build-products - else - echo "file sd-image $img" >> $out/nix-support/hydra-build-products - fi - - echo "Decompressing rootfs image" - zstd -d --no-progress "${rootfsImage}" -o ./root-fs.img - - # Gap in front of the first partition, in MiB - gap=8 - - # Create the image file sized to fit /boot/firmware and /, plus slack for the gap. - rootSizeBlocks=$(du -B 512 --apparent-size ./root-fs.img | awk '{ print $1 }') - firmwareSizeBlocks=$((${toString config.sdImage.firmwareSize} * 1024 * 1024 / 512)) - imageSize=$((rootSizeBlocks * 512 + firmwareSizeBlocks * 512 + gap * 1024 * 1024)) - truncate -s $imageSize $img - - # type=b is 'W95 FAT32', type=83 is 'Linux'. - # The "bootable" partition is where u-boot will look file for the bootloader - # information (dtbs, extlinux.conf file). - sfdisk $img <<EOF - label: dos - label-id: ${config.sdImage.firmwarePartitionID} - - start=''${gap}M, size=$firmwareSizeBlocks, type=b - start=$((gap + ${toString config.sdImage.firmwareSize}))M, type=83, bootable - EOF - - # Copy the rootfs into the SD image - eval $(partx $img -o START,SECTORS --nr 2 --pairs) - dd conv=notrunc if=./root-fs.img of=$img seek=$START count=$SECTORS - - # Create a FAT32 /boot/firmware partition of suitable size into firmware_part.img - eval $(partx $img -o START,SECTORS --nr 1 --pairs) - truncate -s $((SECTORS * 512)) firmware_part.img - faketime "1970-01-01 00:00:00" mkfs.vfat -i ${config.sdImage.firmwarePartitionID} -n ${config.sdImage.firmwarePartitionName} firmware_part.img - - # Populate the files intended for /boot/firmware - mkdir firmware - ${config.sdImage.populateFirmwareCommands} - - # Copy the populated /boot/firmware into the SD image - (cd firmware; mcopy -psvm -i ../firmware_part.img ./* ::) - # Verify the FAT partition before copying it. - fsck.vfat -vn firmware_part.img - dd conv=notrunc if=firmware_part.img of=$img seek=$START count=$SECTORS - if test -n "$compressImage"; then - zstd -T$NIX_BUILD_CORES --rm $img - fi - ''; - }) {}; - - boot.postBootCommands = '' - # On the first boot do some maintenance tasks - if [ -f /nix-path-registration ]; then - set -euo pipefail - set -x - # Figure out device names for the boot device and root filesystem. - rootPart=$(${pkgs.utillinux}/bin/findmnt -n -o SOURCE /) - bootDevice=$(lsblk -npo PKNAME $rootPart) - - # Resize the root partition and the filesystem to fit the disk - echo ",+," | sfdisk -N2 --no-reread $bootDevice - ${pkgs.parted}/bin/partprobe - ${pkgs.e2fsprogs}/bin/resize2fs $rootPart - - # Register the contents of the initial Nix store - ${config.nix.package.out}/bin/nix-store --load-db < /nix-path-registration - - # nixos-rebuild also requires a "system" profile and an /etc/NIXOS tag. - touch /etc/NIXOS - ${config.nix.package.out}/bin/nix-env -p /nix/var/nix/profiles/system --set /run/current-system - - # Prevents this from running on later boots. - rm -f /nix-path-registration - fi - ''; + warnings = [ + '' + .../cd-dvd/sd-image.nix is deprecated and will eventually be removed. + Please switch to .../sd-card/sd-image.nix, instead. + '' + ]; }; } diff --git a/nixos/modules/installer/cd-dvd/system-tarball-fuloong2f.nix b/nixos/modules/installer/cd-dvd/system-tarball-fuloong2f.nix index 6d4ba96dba0..123f487baf9 100644 --- a/nixos/modules/installer/cd-dvd/system-tarball-fuloong2f.nix +++ b/nixos/modules/installer/cd-dvd/system-tarball-fuloong2f.nix @@ -26,7 +26,7 @@ let # A clue for the kernel loading kernelParams = pkgs.writeText "kernel-params.txt" '' Kernel Parameters: - init=/boot/init systemConfig=/boot/init ${toString config.boot.kernelParams} + init=/boot/init ${toString config.boot.kernelParams} ''; # System wide nixpkgs config @@ -104,7 +104,7 @@ in ''; # Some more help text. - services.mingetty.helpLine = + services.getty.helpLine = '' Log in as "root" with an empty password. ${ diff --git a/nixos/modules/installer/cd-dvd/system-tarball-pc.nix b/nixos/modules/installer/cd-dvd/system-tarball-pc.nix index f2af7dcde3d..a79209d7dfe 100644 --- a/nixos/modules/installer/cd-dvd/system-tarball-pc.nix +++ b/nixos/modules/installer/cd-dvd/system-tarball-pc.nix @@ -23,13 +23,13 @@ let label nixos MENU LABEL ^NixOS using nfsroot KERNEL bzImage - append ip=dhcp nfsroot=/home/pcroot systemConfig=${config.system.build.toplevel} init=${config.system.build.toplevel}/init rw + append ip=dhcp nfsroot=/home/pcroot init=${config.system.build.toplevel}/init rw # I don't know how to make this boot with nfsroot (using the initrd) label nixos_initrd MENU LABEL NixOS booting the poor ^initrd. KERNEL bzImage - append initrd=initrd ip=dhcp nfsroot=/home/pcroot systemConfig=${config.system.build.toplevel} init=${config.system.build.toplevel}/init rw + append initrd=initrd ip=dhcp nfsroot=/home/pcroot init=${config.system.build.toplevel}/init rw label memtest MENU LABEL ^${pkgs.memtest86.name} diff --git a/nixos/modules/installer/cd-dvd/system-tarball-sheevaplug.nix b/nixos/modules/installer/cd-dvd/system-tarball-sheevaplug.nix index 8408f56f94f..95579f3ca06 100644 --- a/nixos/modules/installer/cd-dvd/system-tarball-sheevaplug.nix +++ b/nixos/modules/installer/cd-dvd/system-tarball-sheevaplug.nix @@ -96,7 +96,7 @@ in boot.initrd.extraUtilsCommands = '' - copy_bin_and_libs ${pkgs.utillinux}/sbin/hwclock + copy_bin_and_libs ${pkgs.util-linux}/sbin/hwclock ''; boot.initrd.postDeviceCommands = @@ -122,7 +122,7 @@ in device = "/dev/something"; }; - services.mingetty = { + services.getty = { # Some more help text. helpLine = '' Log in as "root" with an empty password. ${ |