path: root/doc/languages-frameworks/ruby.section.md

---
title: Ruby
author: Michael Fellinger
date: 2019-05-23
---

# Ruby

## User Guide

### Using Ruby

#### Overview

Several versions of Ruby interpreters are available on Nix, as well as over 250 gems and many applications written in Ruby.
The attribute `ruby` refers to the default Ruby interpreter, which is currently
MRI 2.5. It's also possible to refer to specific versions, e.g. `ruby_2_6`, `jruby`, or `mruby`.

In the nixpkgs tree, Ruby packages can be found throughout, depending on what
they do, and are called from the main package set. Ruby gems, however are
separate sets, and there's one default set for each interpreter (currently MRI
only).

There are two main approaches for using Ruby with gems.
One is to use a specifically locked `Gemfile` for an application that has very strict dependencies.
The other is to depend on the common gems, which we'll explain further down, and
rely on them being updated regularly.

The interpreters have common attributes, namely `gems`, and `withPackages`. So
you can refer to `ruby.gems.nokogiri`, or `ruby_2_5.gems.nokogiri` to get the
Nokogiri gem already compiled and ready to use.

Since not all gems have executables like `nokogiri`, it's usually more
convenient to use the `withPackages` function like this:
`ruby.withPackages (p: with p; [ nokogiri ])`. This will also make sure that the
Ruby in your environment will be able to find the gem and it can be used in your
Ruby code (for example via `ruby` or `irb` executables) via `require "nokogiri"`
as usual.

#### Temporary Ruby environment with `nix-shell`

Rather than having a single Ruby environment shared by all Ruby
development projects on a system, Nix allows you to create separate
environments per project.  `nix-shell` gives you the possibility to
temporarily load another environment akin to a combined `chruby` or
`rvm` and `bundle exec`.

There are two methods for loading a shell with Ruby packages. The first and
recommended method is to create an environment with `ruby.withPackages` and load
that.

```shell
nix-shell -p "ruby.withPackages (ps: with ps; [ nokogiri pry ])"
```

The other method, which is not recommended, is to create an environment and list
all the packages directly.

```shell
nix-shell -p ruby.gems.nokogiri ruby.gems.pry
```

Again, it's possible to launch the interpreter from the shell. The Ruby
interpreter has the attribute `gems` which contains all Ruby gems for that
specific interpreter.

##### Load environment from `.nix` expression

As explained in the Nix manual, `nix-shell` can also load an expression from a
`.nix` file. Say we want to have Ruby 2.5, `nokogori`, and `pry`. Consider a
`shell.nix` file with:

```nix
with import <nixpkgs> {};
ruby.withPackages (ps: with ps; [ nokogiri pry ])
```

What's happening here?

1. We begin with importing the Nix Packages collections. `import <nixpkgs>`
   imports the `<nixpkgs>` function, `{}` calls it and the `with` statement
   brings all attributes of `nixpkgs` in the local scope. These attributes form
   the main package set.
2. Then we create a Ruby environment with the `withPackages` function.
3. The `withPackages` function expects us to provide a function as an argument
   that takes the set of all ruby gems and returns a list of packages to include
   in the environment. Here, we select the packages `nokogiri` and `pry` from
   the package set.

##### Execute command with `--run`

A convenient flag for `nix-shell` is `--run`. It executes a command in the
`nix-shell`. We can e.g. directly open a `pry` REPL:

```shell
nix-shell -p "ruby.withPackages (ps: with ps; [ nokogiri pry ])" --run "pry"
```

Or immediately require `nokogiri` in pry:

```shell
nix-shell -p "ruby.withPackages (ps: with ps; [ nokogiri pry ])" --run "pry -rnokogiri"
```

Or run a script using this environment:

```shell
nix-shell -p "ruby.withPackages (ps: with ps; [ nokogiri pry ])" --run "ruby example.rb"
```

##### Using `nix-shell` as shebang

In fact, for the last case, there is a more convenient method. You can add a
[shebang](https://en.wikipedia.org/wiki/Shebang_(Unix)) to your script
specifying which dependencies `nix-shell` needs. With the following shebang, you
can just execute `./example.rb`, and it will run with all dependencies.

```ruby
#! /usr/bin/env nix-shell
#! nix-shell -i ruby -p "ruby.withPackages (ps: with ps; [ nokogiri rest-client ])"

require 'nokogiri'
require 'rest-client'

body = RestClient.get('http://example.com').body
puts Nokogiri::HTML(body).at('h1').text
```

### Developing with Ruby

#### Using an existing Gemfile

In most cases, you'll already have a `Gemfile.lock` listing all your dependencies.
This can be used to generate a `gemset.nix` which is used to fetch the gems and
combine them into a single environment.
The reason why you need to have a separate file for this, is that Nix requires
you to have a checksum for each input to your build.
Since the `Gemfile.lock` that `bundler` generates doesn't provide us with
checksums, we have to first download each gem, calculate its SHA256, and store
it in this separate file.

So the steps from having just a `Gemfile` to a `gemset.nix` are:

```shell
bundle lock
bundix
```

If you already have a `Gemfile.lock`, you can simply run `bundix` and it will
work the same.

To update the gems in your `Gemfile.lock`, you may use the `bundix -l` flag,
which will create a new `Gemfile.lock` in case the `Gemfile` has a more recent
time of modification.

Once the `gemset.nix` is generated, it can be used in a
`bundlerEnv` derivation. Here is an example you could use for your `shell.nix`:

```nix
# ...
let
  gems = bundlerEnv {
    name = "gems-for-some-project";
    gemdir = ./.;
  };
in mkShell { buildInputs = [ gems gems.wrappedRuby ]; }
```

With this file in your directory, you can run `nix-shell` to build and use the gems.
The important parts here are `bundlerEnv` and `wrappedRuby`.

The `bundlerEnv` is a wrapper over all the gems in your gemset. This means that
all the `/lib` and `/bin` directories will be available, and the executables of
all gems (even of indirect dependencies) will end up in your `$PATH`.
The `wrappedRuby` provides you with all executables that come with Ruby itself,
but wrapped so they can easily find the gems in your gemset.

One common issue that you might have is that you have Ruby 2.6, but also
`bundler` in your gemset. That leads to a conflict for `/bin/bundle` and
`/bin/bundler`. You can resolve this by wrapping either your Ruby or your gems
in a `lowPrio` call. So in order to give the `bundler` from your gemset
priority, it would be used like this:

```nix
# ...
mkShell { buildInputs = [ gems (lowPrio gems.wrappedRuby) ]; }
```


#### Gem-specific configurations and workarounds

In some cases, especially if the gem has native extensions, you might need to
modify the way the gem is built.

This is done via a common configuration file that includes all of the
workarounds for each gem.

This file lives at `/pkgs/development/ruby-modules/gem-config/default.nix`,
since it already contains a lot of entries, it should be pretty easy to add the
modifications you need for your needs.

In the meanwhile, or if the modification is for a private gem, you can also add
the configuration to only your own environment.

Two places that allow this modification are the `ruby` derivation, or `bundlerEnv`.

Here's the `ruby` one:

```nix
{ pg_version ? "10", pkgs ? import <nixpkgs> { } }:
let
  myRuby = pkgs.ruby.override {
    defaultGemConfig = pkgs.defaultGemConfig // {
      pg = attrs: {
        buildFlags =
        [ "--with-pg-config=${pkgs."postgresql_${pg_version}"}/bin/pg_config" ];
      };
    };
  };
in myRuby.withPackages (ps: with ps; [ pg ])
```

And an example with `bundlerEnv`:

```nix
{ pg_version ? "10", pkgs ? import <nixpkgs> { } }:
let
  gems = pkgs.bundlerEnv {
    name = "gems-for-some-project";
    gemdir = ./.;
    gemConfig = pkgs.defaultGemConfig // {
      pg = attrs: {
        buildFlags =
        [ "--with-pg-config=${pkgs."postgresql_${pg_version}"}/bin/pg_config" ];
      };
    };
  };
in mkShell { buildInputs = [ gems gems.wrappedRuby ]; }
```

And finally via overlays:

```nix
{ pg_version ? "10" }:
let
  pkgs = import <nixpkgs> {
    overlays = [
      (self: super: {
        defaultGemConfig = super.defaultGemConfig // {
          pg = attrs: {
            buildFlags = [
              "--with-pg-config=${
                pkgs."postgresql_${pg_version}"
              }/bin/pg_config"
            ];
          };
        };
      })
    ];
  };
in pkgs.ruby.withPackages (ps: with ps; [ pg ])
```

Then we can get whichever postgresql version we desire and the `pg` gem will
always reference it correctly:

```shell
$ nix-shell --argstr pg_version 9_4 --run 'ruby -rpg -e "puts PG.library_version"'
90421

$ nix-shell --run 'ruby -rpg -e "puts PG.library_version"'
100007
```

Of course for this use-case one could also use overlays since the configuration
for `pg` depends on the `postgresql` alias, but for demonstration purposes this
has to suffice.

#### Adding a gem to the default gemset

Now that you know how to get a working Ruby environment with Nix, it's time to
go forward and start actually developing with Ruby.
We will first have a look at how Ruby gems are packaged on Nix. Then, we will
look at how you can use development mode with your code.

All gems in the standard set are automatically generated from a single
`Gemfile`. The dependency resolution is done with `bundler` and makes it more
likely that all gems are compatible to each other.

In order to add a new gem to nixpkgs, you can put it into the
`/pkgs/development/ruby-modules/with-packages/Gemfile` and run
`./maintainers/scripts/update-ruby-packages`.

To test that it works, you can then try using the gem with:

```shell
NIX_PATH=nixpkgs=$PWD nix-shell -p "ruby.withPackages (ps: with ps; [ name-of-your-gem ])"
```

#### Packaging applications

A common task is to add a ruby executable to nixpkgs, popular examples would be
`chef`, `jekyll`, or `sass`. A good way to do that is to use the `bundlerApp`
function, that allows you to make a package that only exposes the listed
executables, otherwise the package may cause conflicts through common paths like
`bin/rake` or `bin/bundler` that aren't meant to be used.

The absolute easiest way to do that is to write a
`Gemfile` along these lines:

```ruby
source 'https://rubygems.org' do
  gem 'mdl'
end
```

If you want to package a specific version, you can use the standard Gemfile
syntax for that, e.g. `gem 'mdl', '0.5.0'`, but if you want the latest stable
version anyway, it's easier to update by simply running the `bundle lock` and
`bundix` steps again.

Now you can also also make a `default.nix` that looks like this:

```nix
{ lib, bundlerApp }:

bundlerApp {
  pname = "mdl";
  gemdir = ./.;
  exes = [ "mdl" ];
}
```

All that's left to do is to generate the corresponding `Gemfile.lock` and
`gemset.nix` as described above in the `Using an existing Gemfile` section.

##### Packaging executables that require wrapping

Sometimes your app will depend on other executables at runtime, and tries to
find it through the `PATH` environment variable.

In this case, you can provide a `postBuild` hook to `bundlerApp` that wraps the
gem in another script that prefixes the `PATH`.

Of course you could also make a custom `gemConfig` if you know exactly how to
patch it, but it's usually much easier to maintain with a simple wrapper so the
patch doesn't have to be adjusted for each version.

Here's another example:

```nix
{ lib, bundlerApp, makeWrapper, git, gnutar, gzip }:

bundlerApp {
  pname = "r10k";
  gemdir = ./.;
  exes = [ "r10k" ];

  buildInputs = [ makeWrapper ];

  postBuild = ''
    wrapProgram $out/bin/r10k --prefix PATH : ${lib.makeBinPath [ git gnutar gzip ]}
  '';
}
```