diff options
Diffstat (limited to 'pkgs/development/libraries/aterm/aterm-mingw-asm.patch')
| -rw-r--r-- | pkgs/development/libraries/aterm/aterm-mingw-asm.patch | 498 |
1 files changed, 0 insertions, 498 deletions
diff --git a/pkgs/development/libraries/aterm/aterm-mingw-asm.patch b/pkgs/development/libraries/aterm/aterm-mingw-asm.patch deleted file mode 100644 index ce09ead9042..00000000000 --- a/pkgs/development/libraries/aterm/aterm-mingw-asm.patch +++ /dev/null @@ -1,498 +0,0 @@ -diff -rc aterm-2.8/aterm/gc.c aterm-2.8-new/aterm/gc.c -*** aterm-2.8/aterm/gc.c 2008-11-10 13:54:22.000000000 +0100 ---- aterm-2.8-new/aterm/gc.c 2010-08-23 17:04:56.000000000 +0200 -*************** -*** 260,317 **** - AFun oddSym; - #endif - -- #ifdef WIN32 -- -- unsigned int r_eax, r_ebx, r_ecx, r_edx, \ -- r_esi, r_edi, r_esp, r_ebp; -- ATerm reg[8], real_term; -- -- __asm { -- /* Get the registers into local variables to check them -- for aterms later. */ -- mov r_eax, eax -- mov r_ebx, ebx -- mov r_ecx, ecx -- mov r_edx, edx -- mov r_esi, esi -- mov r_edi, edi -- mov r_esp, esp -- mov r_ebp, ebp -- } -- /* Put the register-values into an array */ -- reg[0] = (ATerm) r_eax; -- reg[1] = (ATerm) r_ebx; -- reg[2] = (ATerm) r_ecx; -- reg[3] = (ATerm) r_edx; -- reg[4] = (ATerm) r_esi; -- reg[5] = (ATerm) r_edi; -- reg[6] = (ATerm) r_esp; -- reg[7] = (ATerm) r_ebp; -- -- for(i=0; i<8; i++) { -- real_term = AT_isInsideValidTerm(reg[i]); -- if (real_term != NULL) { -- AT_markTerm(real_term); -- } -- if (AT_isValidSymbol((Symbol)reg[i])) { -- AT_markSymbol((Symbol)reg[i]); -- } -- } -- -- /* The register variables are on the stack aswell -- I set them to zero so they won't be processed again when -- the stack is traversed. The reg-array is also in the stack -- but that will be adjusted later */ -- r_eax = 0; -- r_ebx = 0; -- r_ecx = 0; -- r_edx = 0; -- r_esi = 0; -- r_edi = 0; -- r_esp = 0; -- r_ebp = 0; -- -- #else - jmp_buf env; - - /* Traverse possible register variables */ ---- 260,265 ---- -*************** -*** 320,326 **** - start = (ATerm *)((char *)env); - stop = ((ATerm *)(((char *)env) + sizeof(jmp_buf))); - mark_memory(start, stop); -- #endif - - stackTop = stack_top(); - ---- 268,273 ---- -*************** -*** 385,442 **** - AFun oddSym; - #endif - -- #ifdef WIN32 -- -- unsigned int r_eax, r_ebx, r_ecx, r_edx, \ -- r_esi, r_edi, r_esp, r_ebp; -- ATerm reg[8], real_term; -- -- __asm { -- /* Get the registers into local variables to check them -- for aterms later. */ -- mov r_eax, eax -- mov r_ebx, ebx -- mov r_ecx, ecx -- mov r_edx, edx -- mov r_esi, esi -- mov r_edi, edi -- mov r_esp, esp -- mov r_ebp, ebp -- } -- /* Put the register-values into an array */ -- reg[0] = (ATerm) r_eax; -- reg[1] = (ATerm) r_ebx; -- reg[2] = (ATerm) r_ecx; -- reg[3] = (ATerm) r_edx; -- reg[4] = (ATerm) r_esi; -- reg[5] = (ATerm) r_edi; -- reg[6] = (ATerm) r_esp; -- reg[7] = (ATerm) r_ebp; -- -- for(i=0; i<8; i++) { -- real_term = AT_isInsideValidTerm(reg[i]); -- if (real_term != NULL) { -- AT_markTerm_young(real_term); -- } -- if (AT_isValidSymbol((Symbol)reg[i])) { -- AT_markSymbol_young((Symbol)reg[i]); -- } -- } -- -- /* The register variables are on the stack aswell -- I set them to zero so they won't be processed again when -- the stack is traversed. The reg-array is also in the stack -- but that will be adjusted later */ -- r_eax = 0; -- r_ebx = 0; -- r_ecx = 0; -- r_edx = 0; -- r_esi = 0; -- r_edi = 0; -- r_esp = 0; -- r_ebp = 0; -- -- #else - jmp_buf env; - - /* Traverse possible register variables */ ---- 332,337 ---- -*************** -*** 445,451 **** - start = (ATerm *)((char *)env); - stop = ((ATerm *)(((char *)env) + sizeof(jmp_buf))); - mark_memory_young(start, stop); -- #endif - - stackTop = stack_top(); - start = MIN(stackTop, stackBot); ---- 340,345 ---- -Only in aterm-2.8-new/aterm: gc.c.orig -diff -rc aterm-2.8/configure aterm-2.8-new/configure -*** aterm-2.8/configure 2008-11-10 13:54:27.000000000 +0100 ---- aterm-2.8-new/configure 2010-08-23 17:08:10.000000000 +0200 -*************** -*** 19970,20295 **** - CURDATE=`date` - - -- echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 -- echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 -- if test "${ac_cv_c_bigendian+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -- else -- # See if sys/param.h defines the BYTE_ORDER macro. -- cat >conftest.$ac_ext <<_ACEOF -- /* confdefs.h. */ -- _ACEOF -- cat confdefs.h >>conftest.$ac_ext -- cat >>conftest.$ac_ext <<_ACEOF -- /* end confdefs.h. */ -- #include <sys/types.h> -- #include <sys/param.h> -- -- int -- main () -- { -- #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN -- bogus endian macros -- #endif -- -- ; -- return 0; -- } -- _ACEOF -- rm -f conftest.$ac_objext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- # It does; now see whether it defined to BIG_ENDIAN or not. -- cat >conftest.$ac_ext <<_ACEOF -- /* confdefs.h. */ -- _ACEOF -- cat confdefs.h >>conftest.$ac_ext -- cat >>conftest.$ac_ext <<_ACEOF -- /* end confdefs.h. */ -- #include <sys/types.h> -- #include <sys/param.h> -- -- int -- main () -- { -- #if BYTE_ORDER != BIG_ENDIAN -- not big endian -- #endif -- -- ; -- return 0; -- } -- _ACEOF -- rm -f conftest.$ac_objext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_c_bigendian=yes -- else -- echo "$as_me: failed program was:" >&5 -- sed 's/^/| /' conftest.$ac_ext >&5 -- -- ac_cv_c_bigendian=no -- fi -- rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- else -- echo "$as_me: failed program was:" >&5 -- sed 's/^/| /' conftest.$ac_ext >&5 -- -- # It does not; compile a test program. -- if test "$cross_compiling" = yes; then -- # try to guess the endianness by grepping values into an object file -- ac_cv_c_bigendian=unknown -- cat >conftest.$ac_ext <<_ACEOF -- /* confdefs.h. */ -- _ACEOF -- cat confdefs.h >>conftest.$ac_ext -- cat >>conftest.$ac_ext <<_ACEOF -- /* end confdefs.h. */ -- short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; -- short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; -- void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } -- short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; -- short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; -- void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } -- int -- main () -- { -- _ascii (); _ebcdic (); -- ; -- return 0; -- } -- _ACEOF -- rm -f conftest.$ac_objext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then -- ac_cv_c_bigendian=yes -- fi -- if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then -- if test "$ac_cv_c_bigendian" = unknown; then -- ac_cv_c_bigendian=no -- else -- # finding both strings is unlikely to happen, but who knows? -- ac_cv_c_bigendian=unknown -- fi -- fi -- else -- echo "$as_me: failed program was:" >&5 -- sed 's/^/| /' conftest.$ac_ext >&5 -- -- fi -- rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- else -- cat >conftest.$ac_ext <<_ACEOF -- /* confdefs.h. */ -- _ACEOF -- cat confdefs.h >>conftest.$ac_ext -- cat >>conftest.$ac_ext <<_ACEOF -- /* end confdefs.h. */ -- int -- main () -- { -- /* Are we little or big endian? From Harbison&Steele. */ -- union -- { -- long l; -- char c[sizeof (long)]; -- } u; -- u.l = 1; -- exit (u.c[sizeof (long) - 1] == 1); -- } -- _ACEOF -- rm -f conftest$ac_exeext -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_c_bigendian=no -- else -- echo "$as_me: program exited with status $ac_status" >&5 -- echo "$as_me: failed program was:" >&5 -- sed 's/^/| /' conftest.$ac_ext >&5 -- -- ( exit $ac_status ) -- ac_cv_c_bigendian=yes -- fi -- rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -- fi -- fi -- rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- fi -- echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 -- echo "${ECHO_T}$ac_cv_c_bigendian" >&6 -- case $ac_cv_c_bigendian in -- yes) -- -- cat >>confdefs.h <<\_ACEOF -- #define WORDS_BIGENDIAN 1 -- _ACEOF -- ;; -- no) -- ;; -- *) -- { { echo "$as_me:$LINENO: error: unknown endianness -- presetting ac_cv_c_bigendian=no (or yes) will help" >&5 -- echo "$as_me: error: unknown endianness -- presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} -- { (exit 1); exit 1; }; } ;; -- esac -- -- -- echo "$as_me:$LINENO: checking whether float word ordering is big endian" >&5 -- echo $ECHO_N "checking whether float word ordering is big endian... $ECHO_C" >&6 -- if test "${ax_cv_c_float_word_order_big+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -- else -- -- if test "$cross_compiling" = yes; then -- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -- See \`config.log' for more details." >&5 -- echo "$as_me: error: cannot run test program while cross compiling -- See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -- else -- cat >conftest.$ac_ext <<_ACEOF -- -- /* This code returns 0 if the float word order is big endian and >= 1 if it is little endian. */ -- main(){ -- #ifdef WORDS_BIGENDIAN -- return 0; /* If the system's encoding is big endian, so is the float word order. NOTE: If the encoding is big endian and WORDS_BIGENDIAN isn't defined, the code below will still return the correct float word order (big). */ -- #else -- union -- { -- double d; -- /* IEEE754 little endian encoded floating point number structure with little endian float word order. */ -- struct{ -- unsigned int mantissa1:32; -- unsigned int mantissa0:20; -- unsigned int exponent:11; -- unsigned int negative:1; -- } ieee; -- } u; -- u.d = -1; -- return (u.ieee.negative == 1); -- #endif -- } -- -- _ACEOF -- rm -f conftest$ac_exeext -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ax_cv_c_float_word_order_big=yes -- else -- echo "$as_me: program exited with status $ac_status" >&5 -- echo "$as_me: failed program was:" >&5 -- sed 's/^/| /' conftest.$ac_ext >&5 -- -- ( exit $ac_status ) -- ax_cv_c_float_word_order_big=no -- fi -- rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -- fi -- -- -- fi -- echo "$as_me:$LINENO: result: $ax_cv_c_float_word_order_big" >&5 -- echo "${ECHO_T}$ax_cv_c_float_word_order_big" >&6 -- -- case $ax_cv_c_float_word_order_big in -- yes) -- -- -- cat >>confdefs.h <<\_ACEOF -- #define FLOAT_WORD_ORDER_BIG 1 -- _ACEOF -- -- -- ;; -- no) -- ;; -- *) -- -- { { echo "$as_me:$LINENO: error: Unable to determain float word ordering. You need to manually preset ax_cv_c_float_word_order_big=(yes / no). -- " >&5 -- echo "$as_me: error: Unable to determain float word ordering. You need to manually preset ax_cv_c_float_word_order_big=(yes / no). -- " >&2;} -- { (exit 1); exit 1; }; } -- -- ;; -- esac -- -- - - - for ac_func in strdup ---- 19970,19975 ---- -diff -rc aterm-2.8/Makefile.in aterm-2.8-new/Makefile.in -*** aterm-2.8/Makefile.in 2008-11-10 13:54:28.000000000 +0100 ---- aterm-2.8-new/Makefile.in 2010-08-23 17:05:27.000000000 +0200 -*************** -*** 217,223 **** - - pkgconfig_DATA = ${PACKAGE}.pc - -! SUBDIRS = aterm utils test - - ACLOCAL_AMFLAGS = -I . - subdir = . ---- 217,223 ---- - - pkgconfig_DATA = ${PACKAGE}.pc - -! SUBDIRS = aterm utils - - ACLOCAL_AMFLAGS = -I . - subdir = . |