1 files changed, 156 insertions, 0 deletions
diff --git a/nixos/modules/services/networking/yggdrasil.xml b/nixos/modules/services/networking/yggdrasil.xml
new file mode 100644
index 00000000000..a341d5d8153
--- /dev/null
+++ b/nixos/modules/services/networking/yggdrasil.xml
@@ -0,0 +1,156 @@
+<?xml version="1.0"?>
+<chapter xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xi="http://www.w3.org/2001/XInclude" version="5.0" xml:id="module-services-networking-yggdrasil">
+  <title>Yggdrasil</title>
+  <para>
+    <emphasis>Source:</emphasis>
+    <filename>modules/services/networking/yggdrasil/default.nix</filename>
+  </para>
+  <para>
+    <emphasis>Upstream documentation:</emphasis>
+    <link xlink:href="https://yggdrasil-network.github.io/"/>
+  </para>
+  <para>
+Yggdrasil is an early-stage implementation of a fully end-to-end encrypted,
+self-arranging IPv6 network.
+</para>
+  <section xml:id="module-services-networking-yggdrasil-configuration">
+    <title>Configuration</title>
+    <section xml:id="module-services-networking-yggdrasil-configuration-simple">
+      <title>Simple ephemeral node</title>
+      <para>
+An annotated example of a simple configuration:
+<programlisting>
+{
+  services.yggdrasil = {
+    enable = true;
+    persistentKeys = false;
+      # The NixOS module will generate new keys and a new IPv6 address each time
+      # it is started if persistentKeys is not enabled.
+
+    config = {
+      Peers = [
+        # Yggdrasil will automatically connect and "peer" with other nodes it
+        # discovers via link-local multicast annoucements. Unless this is the
+        # case (it probably isn't) a node needs peers within the existing
+        # network that it can tunnel to.
+        "tcp://1.2.3.4:1024"
+        "tcp://1.2.3.5:1024"
+        # Public peers can be found at
+        # https://github.com/yggdrasil-network/public-peers
+      ];
+    };
+  };
+}
+</programlisting>
+   </para>
+    </section>
+    <section xml:id="module-services-networking-yggdrasil-configuration-prefix">
+      <title>Persistent node with prefix</title>
+      <para>
+A node with a fixed address that announces a prefix:
+<programlisting>
+let
+  address = "210:5217:69c0:9afc:1b95:b9f:8718:c3d2";
+  prefix = "310:5217:69c0:9afc";
+  # taken from the output of "yggdrasilctl getself".
+in {
+
+  services.yggdrasil = {
+    enable = true;
+    persistentKeys = true; # Maintain a fixed public key and IPv6 address.
+    config = {
+      Peers = [ "tcp://1.2.3.4:1024" "tcp://1.2.3.5:1024" ];
+      NodeInfo = {
+        # This information is visible to the network.
+        name = config.networking.hostName;
+        location = "The North Pole";
+      };
+    };
+  };
+
+  boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = 1;
+    # Forward traffic under the prefix.
+
+  networking.interfaces.${eth0}.ipv6.addresses = [{
+    # Set a 300::/8 address on the local physical device.
+    address = prefix + "::1";
+    prefixLength = 64;
+  }];
+
+  services.radvd = {
+    # Annouce the 300::/8 prefix to eth0.
+    enable = true;
+    config = ''
+      interface eth0
+      {
+        AdvSendAdvert on;
+        prefix ${prefix}::/64 {
+          AdvOnLink on;
+          AdvAutonomous on;
+        };
+        route 200::/8 {};
+      };
+    '';
+  };
+}
+</programlisting>
+  </para>
+    </section>
+    <section xml:id="module-services-networking-yggdrasil-configuration-container">
+      <title>Yggdrasil attached Container</title>
+      <para>
+A NixOS container attached to the Yggdrasil network via a node running on the
+host:
+        <programlisting>
+let
+  yggPrefix64 = "310:5217:69c0:9afc";
+    # Again, taken from the output of "yggdrasilctl getself".
+in
+{
+  boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = 1;
+  # Enable IPv6 forwarding.
+
+  networking = {
+    bridges.br0.interfaces = [ ];
+    # A bridge only to containers&#x2026;
+
+    interfaces.br0 = {
+      # &#x2026; configured with a prefix address.
+      ipv6.addresses = [{
+        address = "${yggPrefix64}::1";
+        prefixLength = 64;
+      }];
+    };
+  };
+
+  containers.foo = {
+    autoStart = true;
+    privateNetwork = true;
+    hostBridge = "br0";
+    # Attach the container to the bridge only.
+    config = { config, pkgs, ... }: {
+      networking.interfaces.eth0.ipv6 = {
+        addresses = [{
+          # Configure a prefix address.
+          address = "${yggPrefix64}::2";
+          prefixLength = 64;
+        }];
+        routes = [{
+          # Configure the prefix route.
+          address = "200::";
+          prefixLength = 7;
+          via = "${yggPrefix64}::1";
+        }];
+      };
+
+      services.httpd.enable = true;
+      networking.firewall.allowedTCPPorts = [ 80 ];
+    };
+  };
+
+}
+</programlisting>
+      </para>
+    </section>
+  </section>
+</chapter>