diff options
129 files changed, 19290 insertions, 13465 deletions
diff --git a/doc/functions/generators.section.md b/doc/functions/generators.section.md index bb8426d8087..d54e5027c79 100644 --- a/doc/functions/generators.section.md +++ b/doc/functions/generators.section.md @@ -49,7 +49,7 @@ str\:ange:"very::strange" merge:"diff3" ``` -::: note +::: {.note} Nix store paths can be converted to strings by enclosing a derivation attribute like so: `"${drv}"`. ::: diff --git a/doc/languages-frameworks/ocaml.section.md b/doc/languages-frameworks/ocaml.section.md index 9b92a80f471..5ffc23173d6 100644 --- a/doc/languages-frameworks/ocaml.section.md +++ b/doc/languages-frameworks/ocaml.section.md @@ -4,60 +4,83 @@ OCaml libraries should be installed in `$(out)/lib/ocaml/${ocaml.version}/site-l Given that most of the OCaml ecosystem is now built with dune, nixpkgs includes a convenience build support function called `buildDunePackage` that will build an OCaml package using dune, OCaml and findlib and any additional dependencies provided as `buildInputs` or `propagatedBuildInputs`. -Here is a simple package example. It defines an (optional) attribute `minimumOCamlVersion` that will be used to throw a descriptive evaluation error if building with an older OCaml is attempted. It uses the `fetchFromGitHub` fetcher to get its source. It sets the `doCheck` (optional) attribute to `true` which means that tests will be run with `dune runtest -p angstrom` after the build (`dune build -p angstrom`) is complete. It uses `alcotest` as a build input (because it is needed to run the tests) and `bigstringaf` and `result` as propagated build inputs (thus they will also be available to libraries depending on this library). The library will be installed using the `angstrom.install` file that dune generates. +Here is a simple package example. + +- It defines an (optional) attribute `minimalOCamlVersion` that will be used to + throw a descriptive evaluation error if building with an older OCaml is + attempted. + +- It uses the `fetchFromGitHub` fetcher to get its source. + +- `useDune2 = true` ensures that the latest version of Dune is used for the + build (this may become the default value in a future release). + +- It sets the optional `doCheck` attribute such that tests will be run with + `dune runtest -p angstrom` after the build (`dune build -p angstrom`) is + complete, but only if the Ocaml version is at at least `"4.05"`. + +- It uses the package `ocaml-syntax-shims` as a build input, `alcotest` and + `ppx_let` as check inputs (because they are needed to run the tests), and + `bigstringaf` and `result` as propagated build inputs (thus they will also be + available to libraries depending on this library). + +- The library will be installed using the `angstrom.install` file that dune + generates. ```nix -{ lib -, fetchFromGitHub -, buildDunePackage -, alcotest -, result -, bigstringaf -}: +{ lib, + fetchFromGitHub, + buildDunePackage, + ocaml, + ocaml-syntax-shims, + alcotest, + result, + bigstringaf, + ppx_let }: buildDunePackage rec { pname = "angstrom"; - version = "0.10.0"; + version = "0.15.0"; + useDune2 = true; - minimumOCamlVersion = "4.03"; + minimalOCamlVersion = "4.04"; src = fetchFromGitHub { owner = "inhabitedtype"; repo = pname; rev = version; - sha256 = "0lh6024yf9ds0nh9i93r9m6p5psi8nvrqxl5x7jwl13zb0r9xfpw"; + sha256 = "1hmrkdcdlkwy7rxhngf3cv3sa61cznnd9p5lmqhx20664gx2ibrh"; }; - buildInputs = [ alcotest ]; + checkInputs = [ alcotest ppx_let ]; + buildInputs = [ ocaml-syntax-shims ]; propagatedBuildInputs = [ bigstringaf result ]; - doCheck = true; + doCheck = lib.versionAtLeast ocaml.version "4.05"; - meta = with lib; { + meta = { homepage = "https://github.com/inhabitedtype/angstrom"; description = "OCaml parser combinators built for speed and memory efficiency"; - license = licenses.bsd3; - maintainers = with maintainers; [ sternenseemann ]; + license = lib.licenses.bsd3; + maintainers = with lib.maintainers; [ sternenseemann ]; }; -} ``` Here is a second example, this time using a source archive generated with `dune-release`. It is a good idea to use this archive when it is available as it will usually contain substituted variables such as a `%%VERSION%%` field. This library does not depend on any other OCaml library and no tests are run after building it. ```nix -{ lib -, fetchurl -, buildDunePackage -}: +{ lib, fetchurl, buildDunePackage }: buildDunePackage rec { pname = "wtf8"; - version = "1.0.1"; + version = "1.0.2"; + + useDune2 = true; - minimumOCamlVersion = "4.01"; + minimalOCamlVersion = "4.02"; src = fetchurl { - url = "https://github.com/flowtype/ocaml-${pname}/releases/download/v${version}/${pname}-${version}.tbz"; - sha256 = "1msg3vycd3k8qqj61sc23qks541cxpb97vrnrvrhjnqxsqnh6ygq"; + url = "https://github.com/flowtype/ocaml-${pname}/releases/download/v${version}/${pname}-v${version}.tbz"; + sha256 = "09ygcxxd5warkdzz17rgpidrd0pg14cy2svvnvy1hna080lzg7vp"; }; meta = with lib; { diff --git a/maintainers/maintainer-list.nix b/maintainers/maintainer-list.nix index ff9246a3bb5..af86f1d3da6 100644 --- a/maintainers/maintainer-list.nix +++ b/maintainers/maintainer-list.nix @@ -1883,6 +1883,12 @@ githubId = 2131991; name = "Elmo Todurov"; }; + cjab = { + email = "chad+nixpkgs@jablonski.xyz"; + github = "cjab"; + githubId = 136485; + name = "Chad Jablonski"; + }; ck3d = { email = "ck3d@gmx.de"; github = "ck3d"; @@ -4017,6 +4023,12 @@ githubId = 1742172; name = "Hamish Hutchings"; }; + hanemile = { + email = "mail@emile.space"; + github = "hanemile"; + githubId = 22756350; + name = "Emile Hansmaennel"; + }; hansjoergschurr = { email = "commits@schurr.at"; github = "hansjoergschurr"; diff --git a/maintainers/scripts/haskell/update-stackage.sh b/maintainers/scripts/haskell/update-stackage.sh index 7a0e1e1f81a..ecf38dc4b90 100755 --- a/maintainers/scripts/haskell/update-stackage.sh +++ b/maintainers/scripts/haskell/update-stackage.sh @@ -11,15 +11,17 @@ stackage_config="pkgs/development/haskell-modules/configuration-hackage2nix/stac trap "rm ${tmpfile} ${tmpfile}.new" 0 touch "$tmpfile" "$tmpfile.new" # Creating files here so that trap creates no errors. -curl -L -s "https://stackage.org/nightly/cabal.config" >"$tmpfile" -old_version=$(grep "# Stackage Nightly" $stackage_config | sed -E 's/.*([0-9]{4}-[0-9]{2}-[0-9]{2}).*/\1/') -version=$(sed -rn "s/^--.*http:..(www.)?stackage.org.snapshot.nightly-//p" "$tmpfile") +curl -L -s "https://stackage.org/lts/cabal.config" >"$tmpfile" +old_version=$(grep "# Stackage" $stackage_config | sed -E 's/.*([0-9]{2}\.[0-9]+)/\1/') +version=$(sed -rn "s/^--.*http:..(www.)?stackage.org.snapshot.lts-//p" "$tmpfile") if [[ "$old_version" == "$version" ]]; then echo "No new stackage version" exit 0 # Nothing to do fi +echo "Updating Stackage LTS from $old_version to $version." + # Create a simple yaml version of the file. sed -r \ -e '/^--/d' \ @@ -31,7 +33,7 @@ sed -r \ < "${tmpfile}" | sort --ignore-case >"${tmpfile}.new" cat > $stackage_config << EOF -# Stackage Nightly $version +# Stackage LTS $version # This file is auto-generated by # maintainers/scripts/haskell/update-stackage.sh default-package-overrides: @@ -39,29 +41,16 @@ EOF # Drop restrictions on some tools where we always want the latest version. sed -r \ - -e '/ cabal-install /d' \ -e '/ cabal2nix /d' \ - -e '/ cabal2spec /d' \ -e '/ distribution-nixpkgs /d' \ - -e '/ git-annex /d' \ - -e '/ hindent /d' \ - -e '/ hledger/d' \ - -e '/ hlint /d' \ - -e '/ hoogle /d' \ - -e '/ hopenssl /d' \ -e '/ jailbreak-cabal /d' \ - -e '/ json-autotype/d' \ -e '/ language-nix /d' \ - -e '/ shake /d' \ - -e '/ ShellCheck /d' \ - -e '/ stack /d' \ - -e '/ weeder /d' \ < "${tmpfile}.new" >> $stackage_config if [[ "${1:-}" == "--do-commit" ]]; then git add $stackage_config git commit -F - << EOF -haskellPackages: stackage-nightly $old_version -> $version +haskellPackages: stackage-lts $old_version -> $version This commit has been generated by maintainers/scripts/haskell/update-stackage.sh EOF diff --git a/nixos/doc/manual/configuration/file-systems.xml b/nixos/doc/manual/configuration/file-systems.xml index 9747433375f..42c59844ff4 100644 --- a/nixos/doc/manual/configuration/file-systems.xml +++ b/nixos/doc/manual/configuration/file-systems.xml @@ -54,4 +54,5 @@ </para> </note> <xi:include href="luks-file-systems.xml" /> + <xi:include href="../from_md/configuration/sshfs-file-systems.section.xml" /> </chapter> diff --git a/nixos/doc/manual/configuration/sshfs-file-systems.section.md b/nixos/doc/manual/configuration/sshfs-file-systems.section.md new file mode 100644 index 00000000000..4625fce03d5 --- /dev/null +++ b/nixos/doc/manual/configuration/sshfs-file-systems.section.md @@ -0,0 +1,104 @@ +# SSHFS File Systems {#sec-sshfs-file-systems} + +[SSHFS][sshfs] is a [FUSE][fuse] filesystem that allows easy access to directories on a remote machine using the SSH File Transfer Protocol (SFTP). +It means that if you have SSH access to a machine, no additional setup is needed to mount a directory. + +[sshfs]: https://github.com/libfuse/sshfs +[fuse]: https://en.wikipedia.org/wiki/Filesystem_in_Userspace + +## Interactive mounting {#sec-sshfs-interactive} + +In NixOS, SSHFS is packaged as <package>sshfs</package>. +Once installed, mounting a directory interactively is simple as running: +```ShellSession +$ sshfs my-user@example.com:/my-dir /mnt/my-dir +``` +Like any other FUSE file system, the directory is unmounted using: +```ShellSession +$ fusermount -u /mnt/my-dir +``` + +## Non-interactive mounting {#sec-sshfs-non-interactive} + +Mounting non-interactively requires some precautions because `sshfs` will run at boot and under a different user (root). +For obvious reason, you can't input a password, so public key authentication using an unencrypted key is needed. +To create a new key without a passphrase you can do: +```ShellSession +$ ssh-keygen -t ed25519 -P '' -f example-key +Generating public/private ed25519 key pair. +Your identification has been saved in test-key +Your public key has been saved in test-key.pub +The key fingerprint is: +SHA256:yjxl3UbTn31fLWeyLYTAKYJPRmzknjQZoyG8gSNEoIE my-user@workstation +``` +To keep the key safe, change the ownership to `root:root` and make sure the permissions are `600`: +OpenSSH normally refuses to use the key if it's not well-protected. + +The file system can be configured in NixOS via the usual [fileSystems](options.html#opt-fileSystems) option. +Here's a typical setup: +```nix +{ + system.fsPackages = [ pkgs.sshfs ]; + + fileSystems."/mnt/my-dir" = { + device = "my-user@example.com:/my-dir/"; + fsType = "sshfs"; + options = + [ # Filesystem options + "allow_other" # for non-root access + "_netdev" # this is a network fs + "x-systemd.automount" # mount on demand + + # SSH options + "reconnect" # handle connection drops + "ServerAliveInterval=15" # keep connections alive + "IdentityFile=/var/secrets/example-key" + ]; + }; +} +``` +More options from `ssh_config(5)` can be given as well, for example you can change the default SSH port or specify a jump proxy: +```nix +{ + options = + [ "ProxyJump=bastion@example.com" + "Port=22" + ]; +} +``` +It's also possible to change the `ssh` command used by SSHFS to connect to the server. +For example: +```nix +{ + options = + [ (builtins.replaceStrings [" "] ["\\040"] + "ssh_command=${pkgs.openssh}/bin/ssh -v -L 8080:localhost:80") + ]; + +} +``` + +::: {.note} +The escaping of spaces is needed because every option is written to the `/etc/fstab` file, which is a space-separated table. +::: + +### Troubleshooting {#sec-sshfs-troubleshooting} + +If you're having a hard time figuring out why mounting is failing, you can add the option `"debug"`. +This enables a verbose log in SSHFS that you can access via: +```ShellSession +$ journalctl -u $(systemd-escape -p /mnt/my-dir/).mount +Jun 22 11:41:18 workstation mount[87790]: SSHFS version 3.7.1 +Jun 22 11:41:18 workstation mount[87793]: executing <ssh> <-x> <-a> <-oClearAllForwardings=yes> <-oServerAliveInterval=15> <-oIdentityFile=/var/secrets/wrong-key> <-2> <my-user@example.com> <-s> <sftp> +Jun 22 11:41:19 workstation mount[87793]: my-user@example.com: Permission denied (publickey). +Jun 22 11:41:19 workstation mount[87790]: read: Connection reset by peer +Jun 22 11:41:19 workstation systemd[1]: mnt-my\x2ddir.mount: Mount process exited, code=exited, status=1/FAILURE +Jun 22 11:41:19 workstation systemd[1]: mnt-my\x2ddir.mount: Failed with result 'exit-code'. +Jun 22 11:41:19 workstation systemd[1]: Failed to mount /mnt/my-dir. +Jun 22 11:41:19 workstation systemd[1]: mnt-my\x2ddir.mount: Consumed 54ms CPU time, received 2.3K IP traffic, sent 2.7K IP traffic. +``` + +::: {.note} +If the mount point contains special characters it needs to be escaped using `systemd-escape`. +This is due to the way systemd converts paths into unit names. +::: diff --git a/nixos/doc/manual/from_md/configuration/sshfs-file-systems.section.xml b/nixos/doc/manual/from_md/configuration/sshfs-file-systems.section.xml new file mode 100644 index 00000000000..6b317aa63e9 --- /dev/null +++ b/nixos/doc/manual/from_md/configuration/sshfs-file-systems.section.xml @@ -0,0 +1,139 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-sshfs-file-systems"> + <title>SSHFS File Systems</title> + <para> + <link xlink:href="https://github.com/libfuse/sshfs">SSHFS</link> is + a + <link xlink:href="https://en.wikipedia.org/wiki/Filesystem_in_Userspace">FUSE</link> + filesystem that allows easy access to directories on a remote + machine using the SSH File Transfer Protocol (SFTP). It means that + if you have SSH access to a machine, no additional setup is needed + to mount a directory. + </para> + <section xml:id="sec-sshfs-interactive"> + <title>Interactive mounting</title> + <para> + In NixOS, SSHFS is packaged as <package>sshfs</package>. Once + installed, mounting a directory interactively is simple as + running: + </para> + <programlisting> +$ sshfs my-user@example.com:/my-dir /mnt/my-dir +</programlisting> + <para> + Like any other FUSE file system, the directory is unmounted using: + </para> + <programlisting> +$ fusermount -u /mnt/my-dir +</programlisting> + </section> + <section xml:id="sec-sshfs-non-interactive"> + <title>Non-interactive mounting</title> + <para> + Mounting non-interactively requires some precautions because + <literal>sshfs</literal> will run at boot and under a different + user (root). For obvious reason, you can’t input a password, so + public key authentication using an unencrypted key is needed. To + create a new key without a passphrase you can do: + </para> + <programlisting> +$ ssh-keygen -t ed25519 -P '' -f example-key +Generating public/private ed25519 key pair. +Your identification has been saved in test-key +Your public key has been saved in test-key.pub +The key fingerprint is: +SHA256:yjxl3UbTn31fLWeyLYTAKYJPRmzknjQZoyG8gSNEoIE my-user@workstation +</programlisting> + <para> + To keep the key safe, change the ownership to + <literal>root:root</literal> and make sure the permissions are + <literal>600</literal>: OpenSSH normally refuses to use the key if + it’s not well-protected. + </para> + <para> + The file system can be configured in NixOS via the usual + <link xlink:href="options.html#opt-fileSystems">fileSystems</link> + option. Here’s a typical setup: + </para> + <programlisting language="bash"> +{ + system.fsPackages = [ pkgs.sshfs ]; + + fileSystems."/mnt/my-dir" = { + device = "my-user@example.com:/my-dir/"; + fsType = "sshfs"; + options = + [ # Filesystem options + "allow_other" # for non-root access + "_netdev" # this is a network fs + "x-systemd.automount" # mount on demand + + # SSH options + "reconnect" # handle connection drops + "ServerAliveInterval=15" # keep connections alive + "IdentityFile=/var/secrets/example-key" + ]; + }; +} +</programlisting> + <para> + More options from <literal>ssh_config(5)</literal> can be given as + well, for example you can change the default SSH port or specify a + jump proxy: + </para> + <programlisting language="bash"> +{ + options = + [ "ProxyJump=bastion@example.com" + "Port=22" + ]; +} +</programlisting> + <para> + It’s also possible to change the <literal>ssh</literal> command + used by SSHFS to connect to the server. For example: + </para> + <programlisting language="bash"> +{ + options = + [ (builtins.replaceStrings [" "] ["\\040"] + "ssh_command=${pkgs.openssh}/bin/ssh -v -L 8080:localhost:80") + ]; + +} +</programlisting> + <note> + <para> + The escaping of spaces is needed because every option is written + to the <literal>/etc/fstab</literal> file, which is a + space-separated table. + </para> + </note> + <section xml:id="sec-sshfs-troubleshooting"> + <title>Troubleshooting</title> + <para> + If you’re having a hard time figuring out why mounting is + failing, you can add the option + <literal>"debug"</literal>. This enables a verbose log + in SSHFS that you can access via: + </para> + <programlisting> +$ journalctl -u $(systemd-escape -p /mnt/my-dir/).mount +Jun 22 11:41:18 workstation mount[87790]: SSHFS version 3.7.1 +Jun 22 11:41:18 workstation mount[87793]: executing <ssh> <-x> <-a> <-oClearAllForwardings=yes> <-oServerAliveInterval=15> <-oIdentityFile=/var/secrets/wrong-key> <-2> <my-user@example.com> <-s> <sftp> +Jun 22 11:41:19 workstation mount[87793]: my-user@example.com: Permission denied (publickey). +Jun 22 11:41:19 workstation mount[87790]: read: Connection reset by peer +Jun 22 11:41:19 workstation systemd[1]: mnt-my\x2ddir.mount: Mount process exited, code=exited, status=1/FAILURE +Jun 22 11:41:19 workstation systemd[1]: mnt-my\x2ddir.mount: Failed with result 'exit-code'. +Jun 22 11:41:19 workstation systemd[1]: Failed to mount /mnt/my-dir. +Jun 22 11:41:19 workstation systemd[1]: mnt-my\x2ddir.mount: Consumed 54ms CPU time, received 2.3K IP traffic, sent 2.7K IP traffic. +</programlisting> + <note> + <para> + If the mount point contains special characters it needs to be + escaped using <literal>systemd-escape</literal>. This is due + to the way systemd converts paths into unit names. + </para> + </note> + </section> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1310.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1310.section.xml new file mode 100644 index 00000000000..b4f3657b4b8 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1310.section.xml @@ -0,0 +1,6 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-13.10"> + <title>Release 13.10 (<quote>Aardvark</quote>, 2013/10/31)</title> + <para> + This is the first stable release branch of NixOS. + </para> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1404.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1404.section.xml new file mode 100644 index 00000000000..8771623b468 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1404.section.xml @@ -0,0 +1,189 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-14.04"> + <title>Release 14.04 (<quote>Baboon</quote>, 2014/04/30)</title> + <para> + This is the second stable release branch of NixOS. In addition to + numerous new and upgraded packages and modules, this release has the + following highlights: + </para> + <itemizedlist> + <listitem> + <para> + Installation on UEFI systems is now supported. See + <xref linkend="sec-installation" /> for details. + </para> + </listitem> + <listitem> + <para> + Systemd has been updated to version 212, which has + <link xlink:href="http://cgit.freedesktop.org/systemd/systemd/plain/NEWS?id=v212">numerous + improvements</link>. NixOS now automatically starts systemd user + instances when you log in. You can define global user units + through the <literal>systemd.unit.*</literal> options. + </para> + </listitem> + <listitem> + <para> + NixOS is now based on Glibc 2.19 and GCC 4.8. + </para> + </listitem> + <listitem> + <para> + The default Linux kernel has been updated to 3.12. + </para> + </listitem> + <listitem> + <para> + KDE has been updated to 4.12. + </para> + </listitem> + <listitem> + <para> + GNOME 3.10 experimental support has been added. + </para> + </listitem> + <listitem> + <para> + Nix has been updated to 1.7 + (<link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-1.7">details</link>). + </para> + </listitem> + <listitem> + <para> + NixOS now supports fully declarative management of users and + groups. If you set <literal>users.mutableUsers</literal> to + <literal>false</literal>, then the contents of + <literal>/etc/passwd</literal> and <literal>/etc/group</literal> + will be + <link xlink:href="https://www.usenix.org/legacy/event/lisa02/tech/full_papers/traugott/traugott_html/">congruent</link> + to your NixOS configuration. For instance, if you remove a user + from <literal>users.extraUsers</literal> and run + <literal>nixos-rebuild</literal>, the user account will cease to + exist. Also, imperative commands for managing users and groups, + such as <literal>useradd</literal>, are no longer available. If + <literal>users.mutableUsers</literal> is <literal>true</literal> + (the default), then behaviour is unchanged from NixOS 13.10. + </para> + </listitem> + <listitem> + <para> + NixOS now has basic container support, meaning you can easily + run a NixOS instance as a container in a NixOS host system. + These containers are suitable for testing and experimentation + but not production use, since they’re not fully isolated from + the host. See <xref linkend="ch-containers" /> for details. + </para> + </listitem> + <listitem> + <para> + Systemd units provided by packages can now be overridden from + the NixOS configuration. For instance, if a package + <literal>foo</literal> provides systemd units, you can say: + </para> + <programlisting language="bash"> +{ + systemd.packages = [ pkgs.foo ]; +} +</programlisting> + <para> + to enable those units. You can then set or override unit options + in the usual way, e.g. + </para> + <programlisting language="bash"> +{ + systemd.services.foo.wantedBy = [ "multi-user.target" ]; + systemd.services.foo.serviceConfig.MemoryLimit = "512M"; +} +</programlisting> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + </listitem> + <listitem> + <para> + Nixpkgs no longer exposes unfree packages by default. If your + NixOS configuration requires unfree packages from Nixpkgs, you + need to enable support for them explicitly by setting: + </para> + <programlisting language="bash"> +{ + nixpkgs.config.allowUnfree = true; +} +</programlisting> + <para> + Otherwise, you get an error message such as: + </para> + <programlisting> + error: package ‘nvidia-x11-331.49-3.12.17’ in ‘…/nvidia-x11/default.nix:56’ + has an unfree license, refusing to evaluate +</programlisting> + </listitem> + <listitem> + <para> + The Adobe Flash player is no longer enabled by default in the + Firefox and Chromium wrappers. To enable it, you must set: + </para> + <programlisting language="bash"> +{ + nixpkgs.config.allowUnfree = true; + nixpkgs.config.firefox.enableAdobeFlash = true; # for Firefox + nixpkgs.config.chromium.enableAdobeFlash = true; # for Chromium +} +</programlisting> + </listitem> + <listitem> + <para> + The firewall is now enabled by default. If you don’t want this, + you need to disable it explicitly: + </para> + <programlisting language="bash"> +{ + networking.firewall.enable = false; +} +</programlisting> + </listitem> + <listitem> + <para> + The option <literal>boot.loader.grub.memtest86</literal> has + been renamed to + <literal>boot.loader.grub.memtest86.enable</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>mysql55</literal> service has been merged into the + <literal>mysql</literal> service, which no longer sets a default + for the option <literal>services.mysql.package</literal>. + </para> + </listitem> + <listitem> + <para> + Package variants are now differentiated by suffixing the name, + rather than the version. For instance, + <literal>sqlite-3.8.4.3-interactive</literal> is now called + <literal>sqlite-interactive-3.8.4.3</literal>. This ensures that + <literal>nix-env -i sqlite</literal> is unambiguous, and that + <literal>nix-env -u</literal> won’t <quote>upgrade</quote> + <literal>sqlite</literal> to + <literal>sqlite-interactive</literal> or vice versa. Notably, + this change affects the Firefox wrapper (which provides + plugins), as it is now called + <literal>firefox-wrapper</literal>. So when using + <literal>nix-env</literal>, you should do + <literal>nix-env -e firefox; nix-env -i firefox-wrapper</literal> + if you want to keep using the wrapper. This change does not + affect declarative package management, since attribute names + like <literal>pkgs.firefoxWrapper</literal> were already + unambiguous. + </para> + </listitem> + <listitem> + <para> + The symlink <literal>/etc/ca-bundle.crt</literal> is gone. + Programs should instead use the environment variable + <literal>OPENSSL_X509_CERT_FILE</literal> (which points to + <literal>/etc/ssl/certs/ca-bundle.crt</literal>). + </para> + </listitem> + </itemizedlist> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1412.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1412.section.xml new file mode 100644 index 00000000000..3b6af73359d --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1412.section.xml @@ -0,0 +1,466 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-14.12"> + <title>Release 14.12 (<quote>Caterpillar</quote>, 2014/12/30)</title> + <para> + In addition to numerous new and upgraded packages, this release has + the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + Systemd has been updated to version 217, which has numerous + <link xlink:href="http://lists.freedesktop.org/archives/systemd-devel/2014-October/024662.html">improvements.</link> + </para> + </listitem> + <listitem> + <para> + <link xlink:href="https://www.mail-archive.com/nix-dev@lists.science.uu.nl/msg13957.html">Nix + has been updated to 1.8.</link> + </para> + </listitem> + <listitem> + <para> + NixOS is now based on Glibc 2.20. + </para> + </listitem> + <listitem> + <para> + KDE has been updated to 4.14. + </para> + </listitem> + <listitem> + <para> + The default Linux kernel has been updated to 3.14. + </para> + </listitem> + <listitem> + <para> + If <literal>users.mutableUsers</literal> is enabled (the + default), changes made to the declaration of a user or group + will be correctly realised when running + <literal>nixos-rebuild</literal>. For instance, removing a user + specification from <literal>configuration.nix</literal> will + cause the actual user account to be deleted. If + <literal>users.mutableUsers</literal> is disabled, it is no + longer necessary to specify UIDs or GIDs; if omitted, they are + allocated dynamically. + </para> + </listitem> + </itemizedlist> + <para> + Following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>atftpd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>bosun</literal> + </para> + </listitem> + <listitem> + <para> + <literal>bspwm</literal> + </para> + </listitem> + <listitem> + <para> + <literal>chronos</literal> + </para> + </listitem> + <listitem> + <para> + <literal>collectd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>consul</literal> + </para> + </listitem> + <listitem> + <para> + <literal>cpuminer-cryptonight</literal> + </para> + </listitem> + <listitem> + <para> + <literal>crashplan</literal> + </para> + </listitem> + <listitem> + <para> + <literal>dnscrypt-proxy</literal> + </para> + </listitem> + <listitem> + <para> + <literal>docker-registry</literal> + </para> + </listitem> + <listitem> + <para> + <literal>docker</literal> + </para> + </listitem> + <listitem> + <para> + <literal>etcd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>fail2ban</literal> + </para> + </listitem> + <listitem> + <para> + <literal>fcgiwrap</literal> + </para> + </listitem> + <listitem> + <para> + <literal>fleet</literal> + </para> + </listitem> + <listitem> + <para> + <literal>fluxbox</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gdm</literal> + </para> + </listitem> + <listitem> + <para> + <literal>geoclue2</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gitlab</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gitolite</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome3.gnome-documents</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome3.gnome-online-miners</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome3.gvfs</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome3.seahorse</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hbase</literal> + </para> + </listitem> + <listitem> + <para> + <literal>i2pd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>influxdb</literal> + </para> + </listitem> + <listitem> + <para> + <literal>kubernetes</literal> + </para> + </listitem> + <listitem> + <para> + <literal>liquidsoap</literal> + </para> + </listitem> + <listitem> + <para> + <literal>lxc</literal> + </para> + </listitem> + <listitem> + <para> + <literal>mailpile</literal> + </para> + </listitem> + <listitem> + <para> + <literal>mesos</literal> + </para> + </listitem> + <listitem> + <para> + <literal>mlmmj</literal> + </para> + </listitem> + <listitem> + <para> + <literal>monetdb</literal> + </para> + </listitem> + <listitem> + <para> + <literal>mopidy</literal> + </para> + </listitem> + <listitem> + <para> + <literal>neo4j</literal> + </para> + </listitem> + <listitem> + <para> + <literal>nsd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>openntpd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>opentsdb</literal> + </para> + </listitem> + <listitem> + <para> + <literal>openvswitch</literal> + </para> + </listitem> + <listitem> + <para> + <literal>parallels-guest</literal> + </para> + </listitem> + <listitem> + <para> + <literal>peerflix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>phd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>polipo</literal> + </para> + </listitem> + <listitem> + <para> + <literal>prosody</literal> + </para> + </listitem> + <listitem> + <para> + <literal>radicale</literal> + </para> + </listitem> + <listitem> + <para> + <literal>redmine</literal> + </para> + </listitem> + <listitem> + <para> + <literal>riemann</literal> + </para> + </listitem> + <listitem> + <para> + <literal>scollector</literal> + </para> + </listitem> + <listitem> + <para> + <literal>seeks</literal> + </para> + </listitem> + <listitem> + <para> + <literal>siproxd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>strongswan</literal> + </para> + </listitem> + <listitem> + <para> + <literal>tcsd</literal> + </para> + </listitem> + <listitem> + <para> + <literal>teamspeak3</literal> + </para> + </listitem> + <listitem> + <para> + <literal>thermald</literal> + </para> + </listitem> + <listitem> + <para> + <literal>torque/mrom</literal> + </para> + </listitem> + <listitem> + <para> + <literal>torque/server</literal> + </para> + </listitem> + <listitem> + <para> + <literal>uhub</literal> + </para> + </listitem> + <listitem> + <para> + <literal>unifi</literal> + </para> + </listitem> + <listitem> + <para> + <literal>znc</literal> + </para> + </listitem> + <listitem> + <para> + <literal>zookeeper</literal> + </para> + </listitem> + </itemizedlist> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + The default version of Apache httpd is now 2.4. If you use the + <literal>extraConfig</literal> option to pass literal Apache + configuration text, you may need to update it — see + <link xlink:href="http://httpd.apache.org/docs/2.4/upgrading.html">Apache’s + documentation</link> for details. If you wish to continue to use + httpd 2.2, add the following line to your NixOS configuration: + </para> + <programlisting language="bash"> +{ + services.httpd.package = pkgs.apacheHttpd_2_2; +} +</programlisting> + </listitem> + <listitem> + <para> + PHP 5.3 has been removed because it is no longer supported by + the PHP project. A + <link xlink:href="http://php.net/migration54">migration + guide</link> is available. + </para> + </listitem> + <listitem> + <para> + The host side of a container virtual Ethernet pair is now called + <literal>ve-container-name</literal> rather than + <literal>c-container-name</literal>. + </para> + </listitem> + <listitem> + <para> + GNOME 3.10 support has been dropped. The default GNOME version + is now 3.12. + </para> + </listitem> + <listitem> + <para> + VirtualBox has been upgraded to 4.3.20 release. Users may be + required to run <literal>rm -rf /tmp/.vbox*</literal>. The line + <literal>imports = [ <nixpkgs/nixos/modules/programs/virtualbox.nix> ]</literal> + is no longer necessary, use + <literal>services.virtualboxHost.enable = true</literal> + instead. + </para> + <para> + Also, hardening mode is now enabled by default, which means that + unless you want to use USB support, you no longer need to be a + member of the <literal>vboxusers</literal> group. + </para> + </listitem> + <listitem> + <para> + Chromium has been updated to 39.0.2171.65. + <literal>enablePepperPDF</literal> is now enabled by default. + <literal>chromium*Wrapper</literal> packages no longer exist, + because upstream removed NSAPI support. + <literal>chromium-stable</literal> has been renamed to + <literal>chromium</literal>. + </para> + </listitem> + <listitem> + <para> + Python packaging documentation is now part of nixpkgs manual. To + override the python packages available to a custom python you + now use <literal>pkgs.pythonFull.buildEnv.override</literal> + instead of <literal>pkgs.pythonFull.override</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>boot.resumeDevice = "8:6"</literal> is no + longer supported. Most users will want to leave it undefined, + which takes the swap partitions automatically. There is an + evaluation assertion to ensure that the string starts with a + slash. + </para> + </listitem> + <listitem> + <para> + The system-wide default timezone for NixOS installations changed + from <literal>CET</literal> to <literal>UTC</literal>. To choose + a different timezone for your system, configure + <literal>time.timeZone</literal> in + <literal>configuration.nix</literal>. A fairly complete list of + possible values for that setting is available at + <link xlink:href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones">https://en.wikipedia.org/wiki/List_of_tz_database_time_zones</link>. + </para> + </listitem> + <listitem> + <para> + GNU screen has been updated to 4.2.1, which breaks the ability + to connect to sessions created by older versions of screen. + </para> + </listitem> + <listitem> + <para> + The Intel GPU driver was updated to the 3.x prerelease version + (used by most distributions) and supports DRI3 now. + </para> + </listitem> + </itemizedlist> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1509.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1509.section.xml new file mode 100644 index 00000000000..68d2ab389e8 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1509.section.xml @@ -0,0 +1,776 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-15.09"> + <title>Release 15.09 (<quote>Dingo</quote>, 2015/09/30)</title> + <para> + In addition to numerous new and upgraded packages, this release has + the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + The <link xlink:href="http://haskell.org/">Haskell</link> + packages infrastructure has been re-designed from the ground up + ("Haskell NG"). NixOS now distributes the latest + version of every single package registered on + <link xlink:href="http://hackage.haskell.org/">Hackage</link> -- + well in excess of 8,000 Haskell packages. Detailed instructions + on how to use that infrastructure can be found in the + <link xlink:href="https://nixos.org/nixpkgs/manual/#users-guide-to-the-haskell-infrastructure">User's + Guide to the Haskell Infrastructure</link>. Users migrating from + an earlier release may find helpful information below, in the + list of backwards-incompatible changes. Furthermore, we + distribute 51(!) additional Haskell package sets that provide + every single <link xlink:href="http://www.stackage.org/">LTS + Haskell</link> release since version 0.0 as well as the most + recent <link xlink:href="http://www.stackage.org/">Stackage + Nightly</link> snapshot. The announcement + <link xlink:href="https://nixos.org/nix-dev/2015-September/018138.html">"Full + Stackage Support in Nixpkgs"</link> gives additional + details. + </para> + </listitem> + <listitem> + <para> + Nix has been updated to version 1.10, which among other + improvements enables cryptographic signatures on binary caches + for improved security. + </para> + </listitem> + <listitem> + <para> + You can now keep your NixOS system up to date automatically by + setting + </para> + </listitem> + </itemizedlist> + <programlisting language="bash"> +{ + system.autoUpgrade.enable = true; +} +</programlisting> + <para> + This will cause the system to periodically check for updates in your + current channel and run <literal>nixos-rebuild</literal>. + </para> + <itemizedlist> + <listitem> + <para> + This release is based on Glibc 2.21, GCC 4.9 and Linux 3.18. + </para> + </listitem> + <listitem> + <para> + GNOME has been upgraded to 3.16. + </para> + </listitem> + <listitem> + <para> + Xfce has been upgraded to 4.12. + </para> + </listitem> + <listitem> + <para> + KDE 5 has been upgraded to KDE Frameworks 5.10, Plasma 5.3.2 and + Applications 15.04.3. KDE 4 has been updated to kdelibs-4.14.10. + </para> + </listitem> + <listitem> + <para> + E19 has been upgraded to 0.16.8.15. + </para> + </listitem> + </itemizedlist> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>services/mail/exim.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/apache-kafka.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/canto-daemon.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/confd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/devmon.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/gitit.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/ihaskell.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/mbpfan.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/mediatomb.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/mwlib.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/parsoid.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/plex.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/ripple-rest.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/ripple-data-api.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/subsonic.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/sundtek.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/cadvisor.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/das_watchdog.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/grafana.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/riemann-tools.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/teamviewer.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/network-filesystems/u9fs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/aiccu.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/asterisk.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/bird.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/charybdis.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/docker-registry-server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/fan.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/firefox/sync-server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/gateone.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/heyefi.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/i2p.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/lambdabot.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/mstpd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/nix-serve.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/nylon.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/racoon.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/skydns.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/shout.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/softether.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/sslh.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/tinc.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/tlsdated.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/tox-bootstrapd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/tvheadend.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/zerotierone.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/scheduling/marathon.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/fprintd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/hologram.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/munge.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/system/cloud-init.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-servers/shellinabox.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-servers/uwsgi.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/unclutter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/display-managers/sddm.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/coredump.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/loader/loader.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/loader/generic-extlinux-compatible</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/networkd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/resolved.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/timesyncd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>tasks/filesystems/exfat.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>tasks/filesystems/ntfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>tasks/filesystems/vboxsf.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/virtualbox-host.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/vmware-guest.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/xen-dom0.nix</literal> + </para> + </listitem> + </itemizedlist> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist spacing="compact"> + <listitem> + <para> + <literal>sshd</literal> no longer supports DSA and ECDSA host + keys by default. If you have existing systems with such host + keys and want to continue to use them, please set + </para> + </listitem> + </itemizedlist> + <programlisting language="bash"> +{ + system.stateVersion = "14.12"; +} +</programlisting> + <para> + The new option <literal>system.stateVersion</literal> ensures that + certain configuration changes that could break existing systems + (such as the <literal>sshd</literal> host key setting) will maintain + compatibility with the specified NixOS release. NixOps sets the + state version of existing deployments automatically. + </para> + <itemizedlist> + <listitem> + <para> + <literal>cron</literal> is no longer enabled by default, unless + you have a non-empty + <literal>services.cron.systemCronJobs</literal>. To force + <literal>cron</literal> to be enabled, set + <literal>services.cron.enable = true</literal>. + </para> + </listitem> + <listitem> + <para> + Nix now requires binary caches to be cryptographically signed. + If you have unsigned binary caches that you want to continue to + use, you should set + <literal>nix.requireSignedBinaryCaches = false</literal>. + </para> + </listitem> + <listitem> + <para> + Steam now doesn't need root rights to work. Instead of using + <literal>*-steam-chrootenv</literal>, you should now just run + <literal>steam</literal>. <literal>steamChrootEnv</literal> + package was renamed to <literal>steam</literal>, and old + <literal>steam</literal> package -- to + <literal>steamOriginal</literal>. + </para> + </listitem> + <listitem> + <para> + CMPlayer has been renamed to bomi upstream. Package + <literal>cmplayer</literal> was accordingly renamed to + <literal>bomi</literal> + </para> + </listitem> + <listitem> + <para> + Atom Shell has been renamed to Electron upstream. Package + <literal>atom-shell</literal> was accordingly renamed to + <literal>electron</literal> + </para> + </listitem> + <listitem> + <para> + Elm is not released on Hackage anymore. You should now use + <literal>elmPackages.elm</literal> which contains the latest Elm + platform. + </para> + </listitem> + <listitem> + <para> + The CUPS printing service has been updated to version + <literal>2.0.2</literal>. Furthermore its systemd service has + been renamed to <literal>cups.service</literal>. + </para> + <para> + Local printers are no longer shared or advertised by default. + This behavior can be changed by enabling + <literal>services.printing.defaultShared</literal> or + <literal>services.printing.browsing</literal> respectively. + </para> + </listitem> + <listitem> + <para> + The VirtualBox host and guest options have been named more + consistently. They can now found in + <literal>virtualisation.virtualbox.host.*</literal> instead of + <literal>services.virtualboxHost.*</literal> and + <literal>virtualisation.virtualbox.guest.*</literal> instead of + <literal>services.virtualboxGuest.*</literal>. + </para> + <para> + Also, there now is support for the <literal>vboxsf</literal> + file system using the <literal>fileSystems</literal> + configuration attribute. An example of how this can be used in a + configuration: + </para> + </listitem> + </itemizedlist> + <programlisting language="bash"> +{ + fileSystems."/shiny" = { + device = "myshinysharedfolder"; + fsType = "vboxsf"; + }; +} +</programlisting> + <itemizedlist spacing="compact"> + <listitem> + <para> + "<literal>nix-env -qa</literal>" no longer discovers + Haskell packages by name. The only packages visible in the + global scope are <literal>ghc</literal>, + <literal>cabal-install</literal>, and <literal>stack</literal>, + but all other packages are hidden. The reason for this + inconvenience is the sheer size of the Haskell package set. + Name-based lookups are expensive, and most + <literal>nix-env -qa</literal> operations would become much + slower if we'd add the entire Hackage database into the top + level attribute set. Instead, the list of Haskell packages can + be displayed by running: + </para> + </listitem> + </itemizedlist> + <programlisting> +nix-env -f "<nixpkgs>" -qaP -A haskellPackages +</programlisting> + <para> + Executable programs written in Haskell can be installed with: + </para> + <programlisting> +nix-env -f "<nixpkgs>" -iA haskellPackages.pandoc +</programlisting> + <para> + Installing Haskell <emphasis>libraries</emphasis> this way, however, + is no longer supported. See the next item for more details. + </para> + <itemizedlist> + <listitem> + <para> + Previous versions of NixOS came with a feature called + <literal>ghc-wrapper</literal>, a small script that allowed GHC + to transparently pick up on libraries installed in the user's + profile. This feature has been deprecated; + <literal>ghc-wrapper</literal> was removed from the + distribution. The proper way to register Haskell libraries with + the compiler now is the + <literal>haskellPackages.ghcWithPackages</literal> function. The + <link xlink:href="https://nixos.org/nixpkgs/manual/#users-guide-to-the-haskell-infrastructure">User's + Guide to the Haskell Infrastructure</link> provides more + information about this subject. + </para> + </listitem> + <listitem> + <para> + All Haskell builds that have been generated with version 1.x of + the <literal>cabal2nix</literal> utility are now invalid and + need to be re-generated with a current version of + <literal>cabal2nix</literal> to function. The most recent + version of this tool can be installed by running + <literal>nix-env -i cabal2nix</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>haskellPackages</literal> set in Nixpkgs used to + have a function attribute called <literal>extension</literal> + that users could override in their + <literal>~/.nixpkgs/config.nix</literal> files to configure + additional attributes, etc. That function still exists, but it's + now called <literal>overrides</literal>. + </para> + </listitem> + <listitem> + <para> + The OpenBLAS library has been updated to version + <literal>0.2.14</literal>. Support for the + <literal>x86_64-darwin</literal> platform was added. Dynamic + architecture detection was enabled; OpenBLAS now selects + microarchitecture-optimized routines at runtime, so optimal + performance is achieved without the need to rebuild OpenBLAS + locally. OpenBLAS has replaced ATLAS in most packages which use + an optimized BLAS or LAPACK implementation. + </para> + </listitem> + <listitem> + <para> + The <literal>phpfpm</literal> is now using the default PHP + version (<literal>pkgs.php</literal>) instead of PHP 5.4 + (<literal>pkgs.php54</literal>). + </para> + </listitem> + <listitem> + <para> + The <literal>locate</literal> service no longer indexes the Nix + store by default, preventing packages with potentially numerous + versions from cluttering the output. Indexing the store can be + activated by setting + <literal>services.locate.includeStore = true</literal>. + </para> + </listitem> + <listitem> + <para> + The Nix expression search path (<literal>NIX_PATH</literal>) no + longer contains <literal>/etc/nixos/nixpkgs</literal> by + default. You can override <literal>NIX_PATH</literal> by setting + <literal>nix.nixPath</literal>. + </para> + </listitem> + <listitem> + <para> + Python 2.6 has been marked as broken (as it no longer receives + security updates from upstream). + </para> + </listitem> + <listitem> + <para> + Any use of module arguments such as <literal>pkgs</literal> to + access library functions, or to define + <literal>imports</literal> attributes will now lead to an + infinite loop at the time of the evaluation. + </para> + <para> + In case of an infinite loop, use the + <literal>--show-trace</literal> command line argument and read + the line just above the error message. + </para> + <programlisting> +$ nixos-rebuild build --show-trace +… +while evaluating the module argument `pkgs' in "/etc/nixos/my-module.nix": +infinite recursion encountered +</programlisting> + <para> + Any use of <literal>pkgs.lib</literal>, should be replaced by + <literal>lib</literal>, after adding it as argument of the + module. The following module + </para> + <programlisting language="bash"> +{ config, pkgs, ... }: + +with pkgs.lib; + +{ + options = { + foo = mkOption { … }; + }; + config = mkIf config.foo { … }; +} +</programlisting> + <para> + should be modified to look like: + </para> + <programlisting language="bash"> +{ config, pkgs, lib, ... }: + +with lib; + +{ + options = { + foo = mkOption { option declaration }; + }; + config = mkIf config.foo { option definition }; +} +</programlisting> + <para> + When <literal>pkgs</literal> is used to download other projects + to import their modules, and only in such cases, it should be + replaced by <literal>(import <nixpkgs> {})</literal>. The + following module + </para> + <programlisting language="bash"> +{ config, pkgs, ... }: + +let + myProject = pkgs.fetchurl { + src = url; + sha256 = hash; + }; +in + +{ + imports = [ "${myProject}/module.nix" ]; +} +</programlisting> + <para> + should be modified to look like: + </para> + <programlisting language="bash"> +{ config, pkgs, ... }: + +let + myProject = (import <nixpkgs> {}).fetchurl { + src = url; + sha256 = hash; + }; +in + +{ + imports = [ "${myProject}/module.nix" ]; +} +</programlisting> + </listitem> + </itemizedlist> + <para> + Other notable improvements: + </para> + <itemizedlist> + <listitem> + <para> + The nixos and nixpkgs channels were unified, so one + <emphasis>can</emphasis> use + <literal>nix-env -iA nixos.bash</literal> instead of + <literal>nix-env -iA nixos.pkgs.bash</literal>. See + <link xlink:href="https://github.com/NixOS/nixpkgs/commit/2cd7c1f198">the + commit</link> for details. + </para> + </listitem> + <listitem> + <para> + Users running an SSH server who worry about the quality of their + <literal>/etc/ssh/moduli</literal> file with respect to the + <link xlink:href="https://stribika.github.io/2015/01/04/secure-secure-shell.html">vulnerabilities + discovered in the Diffie-Hellman key exchange</link> can now + replace OpenSSH's default version with one they generated + themselves using the new + <literal>services.openssh.moduliFile</literal> option. + </para> + </listitem> + <listitem> + <para> + A newly packaged TeX Live 2015 is provided in + <literal>pkgs.texlive</literal>, split into 6500 nix packages. + For basic user documentation see + <link xlink:href="https://github.com/NixOS/nixpkgs/blob/release-15.09/pkgs/tools/typesetting/tex/texlive/default.nix#L1">the + source</link>. Beware of + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/9757">an + issue</link> when installing a too large package set. The plan + is to deprecate and maybe delete the original TeX packages until + the next release. + </para> + </listitem> + <listitem> + <para> + <literal>buildEnv.env</literal> on all Python interpreters is + now available for nix-shell interoperability. + </para> + </listitem> + </itemizedlist> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1603.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1603.section.xml new file mode 100644 index 00000000000..172b800b599 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1603.section.xml @@ -0,0 +1,695 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-16.03"> + <title>Release 16.03 (<quote>Emu</quote>, 2016/03/31)</title> + <para> + In addition to numerous new and upgraded packages, this release has + the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + Systemd 229, bringing + <link xlink:href="https://github.com/systemd/systemd/blob/v229/NEWS">numerous + improvements</link> over 217. + </para> + </listitem> + <listitem> + <para> + Linux 4.4 (was 3.18). + </para> + </listitem> + <listitem> + <para> + GCC 5.3 (was 4.9). Note that GCC 5 + <link xlink:href="https://gcc.gnu.org/onlinedocs/libstdc++/manual/using_dual_abi.html">changes + the C++ ABI in an incompatible way</link>; this may cause + problems if you try to link objects compiled with different + versions of GCC. + </para> + </listitem> + <listitem> + <para> + Glibc 2.23 (was 2.21). + </para> + </listitem> + <listitem> + <para> + Binutils 2.26 (was 2.23.1). See #909 + </para> + </listitem> + <listitem> + <para> + Improved support for ensuring + <link xlink:href="https://reproducible-builds.org/">bitwise + reproducible builds</link>. For example, + <literal>stdenv</literal> now sets the environment variable + <literal>SOURCE_DATE_EPOCH</literal> to a deterministic value, + and Nix has + <link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-1.11">gained + an option</link> to repeat a build a number of times to test + determinism. An ongoing project, the goal of exact + reproducibility is to allow binaries to be verified + independently (e.g., a user might only trust binaries that + appear in three independent binary caches). + </para> + </listitem> + <listitem> + <para> + Perl 5.22. + </para> + </listitem> + </itemizedlist> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>services/monitoring/longview.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hardware/video/webcam/facetimehd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>i18n/input-method/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>i18n/input-method/fcitx.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>i18n/input-method/ibus.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>i18n/input-method/nabi.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>i18n/input-method/uim.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/fish.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>security/acme.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>security/audit.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>security/oath.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/hardware/irqbalance.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/dspam.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/opendkim.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/postsrsd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/rspamd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/rmilter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/autofs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/bepasty.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/calibre-server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/cfdyndns.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/gammu-smsd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/mathics.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/matrix-synapse.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/octoprint.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/hdaps.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/heapster.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/longview.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/network-filesystems/netatalk.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/network-filesystems/xtreemfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/autossh.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/dnschain.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/gale.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/miniupnpd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/namecoind.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/ostinato.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/pdnsd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/shairport-sync.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/supplicant.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/search/kibana.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/haka.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/physlock.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/pump.io.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/hardware/libinput.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/window-managers/windowlab.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/initrd-network.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/initrd-ssh.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/loader/loader.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/networkd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/resolved.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/lxd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/rkt.nix</literal> + </para> + </listitem> + </itemizedlist> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + We no longer produce graphical ISO images and VirtualBox images + for <literal>i686-linux</literal>. A minimal ISO image is still + provided. + </para> + </listitem> + <listitem> + <para> + Firefox and similar browsers are now <emphasis>wrapped by + default</emphasis>. The package and attribute names are plain + <literal>firefox</literal> or <literal>midori</literal>, etc. + Backward-compatibility attributes were set up, but note that + <literal>nix-env -u</literal> will <emphasis>not</emphasis> + update your current <literal>firefox-with-plugins</literal>; you + have to uninstall it and install <literal>firefox</literal> + instead. + </para> + </listitem> + <listitem> + <para> + <literal>wmiiSnap</literal> has been replaced with + <literal>wmii_hg</literal>, but + <literal>services.xserver.windowManager.wmii.enable</literal> + has been updated respectively so this only affects you if you + have explicitly installed <literal>wmiiSnap</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>jobs</literal> NixOS option has been removed. It served + as compatibility layer between Upstart jobs and SystemD + services. All services have been rewritten to use + <literal>systemd.services</literal> + </para> + </listitem> + <listitem> + <para> + <literal>wmiimenu</literal> is removed, as it has been removed + by the developers upstream. Use <literal>wimenu</literal> from + the <literal>wmii-hg</literal> package. + </para> + </listitem> + <listitem> + <para> + Gitit is no longer automatically added to the module list in + NixOS and as such there will not be any manual entries for it. + You will need to add an import statement to your NixOS + configuration in order to use it, e.g. + </para> + <programlisting language="bash"> +{ + imports = [ <nixpkgs/nixos/modules/services/misc/gitit.nix> ]; +} +</programlisting> + <para> + will include the Gitit service configuration options. + </para> + </listitem> + <listitem> + <para> + <literal>nginx</literal> does not accept flags for enabling and + disabling modules anymore. Instead it accepts + <literal>modules</literal> argument, which is a list of modules + to be built in. All modules now reside in + <literal>nginxModules</literal> set. Example configuration: + </para> + <programlisting language="bash"> +nginx.override { + modules = [ nginxModules.rtmp nginxModules.dav nginxModules.moreheaders ]; +} +</programlisting> + </listitem> + <listitem> + <para> + <literal>s3sync</literal> is removed, as it hasn't been + developed by upstream for 4 years and only runs with ruby 1.8. + For an actively-developer alternative look at + <literal>tarsnap</literal> and others. + </para> + </listitem> + <listitem> + <para> + <literal>ruby_1_8</literal> has been removed as it's not + supported from upstream anymore and probably contains security + issues. + </para> + </listitem> + <listitem> + <para> + <literal>tidy-html5</literal> package is removed. Upstream only + provided <literal>(lib)tidy5</literal> during development, and + now they went back to <literal>(lib)tidy</literal> to work as a + drop-in replacement of the original package that has been + unmaintained for years. You can (still) use the + <literal>html-tidy</literal> package, which got updated to a + stable release from this new upstream. + </para> + </listitem> + <listitem> + <para> + <literal>extraDeviceOptions</literal> argument is removed from + <literal>bumblebee</literal> package. Instead there are now two + separate arguments: <literal>extraNvidiaDeviceOptions</literal> + and <literal>extraNouveauDeviceOptions</literal> for setting + extra X11 options for nvidia and nouveau drivers, respectively. + </para> + </listitem> + <listitem> + <para> + The <literal>Ctrl+Alt+Backspace</literal> key combination no + longer kills the X server by default. There's a new option + <literal>services.xserver.enableCtrlAltBackspace</literal> + allowing to enable the combination again. + </para> + </listitem> + <listitem> + <para> + <literal>emacsPackagesNg</literal> now contains all packages + from the ELPA, MELPA, and MELPA Stable repositories. + </para> + </listitem> + <listitem> + <para> + Data directory for Postfix MTA server is moved from + <literal>/var/postfix</literal> to + <literal>/var/lib/postfix</literal>. Old configurations are + migrated automatically. <literal>service.postfix</literal> + module has also received many improvements, such as correct + directories' access rights, new <literal>aliasFiles</literal> + and <literal>mapFiles</literal> options and more. + </para> + </listitem> + <listitem> + <para> + Filesystem options should now be configured as a list of + strings, not a comma-separated string. The old style will + continue to work, but print a warning, until the 16.09 release. + An example of the new style: + </para> + <programlisting language="bash"> +{ + fileSystems."/example" = { + device = "/dev/sdc"; + fsType = "btrfs"; + options = [ "noatime" "compress=lzo" "space_cache" "autodefrag" ]; + }; +} +</programlisting> + </listitem> + <listitem> + <para> + CUPS, installed by <literal>services.printing</literal> module, + now has its data directory in <literal>/var/lib/cups</literal>. + Old configurations from <literal>/etc/cups</literal> are moved + there automatically, but there might be problems. Also + configuration options + <literal>services.printing.cupsdConf</literal> and + <literal>services.printing.cupsdFilesConf</literal> were removed + because they had been allowing one to override configuration + variables required for CUPS to work at all on NixOS. For most + use cases, <literal>services.printing.extraConf</literal> and + new option <literal>services.printing.extraFilesConf</literal> + should be enough; if you encounter a situation when they are + not, please file a bug. + </para> + <para> + There are also Gutenprint improvements; in particular, a new + option <literal>services.printing.gutenprint</literal> is added + to enable automatic updating of Gutenprint PPMs; it's greatly + recommended to enable it instead of adding + <literal>gutenprint</literal> to the <literal>drivers</literal> + list. + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.vaapiDrivers</literal> has been + removed. Use + <literal>hardware.opengl.extraPackages{,32}</literal> instead. + You can also specify VDPAU drivers there. + </para> + </listitem> + <listitem> + <para> + <literal>programs.ibus</literal> moved to + <literal>i18n.inputMethod.ibus</literal>. The option + <literal>programs.ibus.plugins</literal> changed to + <literal>i18n.inputMethod.ibus.engines</literal> and the option + to enable ibus changed from + <literal>programs.ibus.enable</literal> to + <literal>i18n.inputMethod.enabled</literal>. + <literal>i18n.inputMethod.enabled</literal> should be set to the + used input method name, <literal>"ibus"</literal> for + ibus. An example of the new style: + </para> + <programlisting language="bash"> +{ + i18n.inputMethod.enabled = "ibus"; + i18n.inputMethod.ibus.engines = with pkgs.ibus-engines; [ anthy mozc ]; +} +</programlisting> + <para> + That is equivalent to the old version: + </para> + <programlisting language="bash"> +{ + programs.ibus.enable = true; + programs.ibus.plugins = with pkgs; [ ibus-anthy mozc ]; +} +</programlisting> + </listitem> + <listitem> + <para> + <literal>services.udev.extraRules</literal> option now writes + rules to <literal>99-local.rules</literal> instead of + <literal>10-local.rules</literal>. This makes all the user rules + apply after others, so their results wouldn't be overriden by + anything else. + </para> + </listitem> + <listitem> + <para> + Large parts of the <literal>services.gitlab</literal> module has + been been rewritten. There are new configuration options + available. The <literal>stateDir</literal> option was renamned + to <literal>statePath</literal> and the + <literal>satellitesDir</literal> option was removed. Please + review the currently available options. + </para> + </listitem> + <listitem> + <para> + The option + <literal>services.nsd.zones.<name>.data</literal> no + longer interpret the dollar sign ($) as a shell variable, as + such it should not be escaped anymore. Thus the following zone + data: + </para> + <programlisting> +$ORIGIN example.com. +$TTL 1800 +@ IN SOA ns1.vpn.nbp.name. admin.example.com. ( +</programlisting> + <para> + Should modified to look like the actual file expected by nsd: + </para> + <programlisting> +$ORIGIN example.com. +$TTL 1800 +@ IN SOA ns1.vpn.nbp.name. admin.example.com. ( +</programlisting> + </listitem> + <listitem> + <para> + <literal>service.syncthing.dataDir</literal> options now has to + point to exact folder where syncthing is writing to. Example + configuration should look something like: + </para> + <programlisting language="bash"> +{ + services.syncthing = { + enable = true; + dataDir = "/home/somebody/.syncthing"; + user = "somebody"; + }; +} +</programlisting> + </listitem> + <listitem> + <para> + <literal>networking.firewall.allowPing</literal> is now enabled + by default. Users are encouraged to configure an appropriate + rate limit for their machines using the Kernel interface at + <literal>/proc/sys/net/ipv4/icmp_ratelimit</literal> and + <literal>/proc/sys/net/ipv6/icmp/ratelimit</literal> or using + the firewall itself, i.e. by setting the NixOS option + <literal>networking.firewall.pingLimit</literal>. + </para> + </listitem> + <listitem> + <para> + Systems with some broadcom cards used to result into a generated + config that is no longer accepted. If you get errors like + </para> + <programlisting> +error: path ‘/nix/store/*-broadcom-sta-*’ does not exist and cannot be created +</programlisting> + <para> + you should either re-run + <literal>nixos-generate-config</literal> or manually replace + <literal>"${config.boot.kernelPackages.broadcom_sta}"</literal> + by <literal>config.boot.kernelPackages.broadcom_sta</literal> in + your <literal>/etc/nixos/hardware-configuration.nix</literal>. + More discussion is on + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/12595"> + the github issue</link>. + </para> + </listitem> + <listitem> + <para> + The <literal>services.xserver.startGnuPGAgent</literal> option + has been removed. GnuPG 2.1.x changed the way the gpg-agent + works, and that new approach no longer requires (or even + supports) the "start everything as a child of the + agent" scheme we've implemented in NixOS for older + versions. To configure the gpg-agent for your X session, add the + following code to <literal>~/.bashrc</literal> or some file + that’s sourced when your shell is started: + </para> + <programlisting> +GPG_TTY=$(tty) +export GPG_TTY +</programlisting> + <para> + If you want to use gpg-agent for SSH, too, add the following to + your session initialization (e.g. + <literal>displayManager.sessionCommands</literal>) + </para> + <programlisting> + gpg-connect-agent /bye + unset SSH_AGENT_PID + export SSH_AUTH_SOCK="''${HOME}/.gnupg/S.gpg-agent.ssh" +</programlisting> + <para> + and make sure that + </para> + <programlisting> + enable-ssh-support +</programlisting> + <para> + is included in your <literal>~/.gnupg/gpg-agent.conf</literal>. + You will need to use <literal>ssh-add</literal> to re-add your + ssh keys. If gpg’s automatic transformation of the private keys + to the new format fails, you will need to re-import your private + keyring as well: + </para> + <programlisting> + gpg --import ~/.gnupg/secring.gpg +</programlisting> + <para> + The <literal>gpg-agent(1)</literal> man page has more details + about this subject, i.e. in the "EXAMPLES" section. + </para> + </listitem> + </itemizedlist> + <para> + Other notable improvements: + </para> + <itemizedlist> + <listitem> + <para> + <literal>ejabberd</literal> module is brought back and now works + on NixOS. + </para> + </listitem> + <listitem> + <para> + Input method support was improved. New NixOS modules (fcitx, + nabi and uim), fcitx engines (chewing, hangul, m17n, mozc and + table-other) and ibus engines (hangul and m17n) have been added. + </para> + </listitem> + </itemizedlist> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1609.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1609.section.xml new file mode 100644 index 00000000000..0fba40a0e78 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1609.section.xml @@ -0,0 +1,273 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-16.09"> + <title>Release 16.09 (<quote>Flounder</quote>, 2016/09/30)</title> + <para> + In addition to numerous new and upgraded packages, this release has + the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + Many NixOS configurations and Nix packages now use significantly + less disk space, thanks to the + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/7117">extensive + work on closure size reduction</link>. For example, the closure + size of a minimal NixOS container went down from ~424 MiB in + 16.03 to ~212 MiB in 16.09, while the closure size of Firefox + went from ~651 MiB to ~259 MiB. + </para> + </listitem> + <listitem> + <para> + To improve security, packages are now + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/12895">built + using various hardening features</link>. See the Nixpkgs manual + for more information. + </para> + </listitem> + <listitem> + <para> + Support for PXE netboot. See + <xref linkend="sec-booting-from-pxe" /> for documentation. + </para> + </listitem> + <listitem> + <para> + X.org server 1.18. If you use the <literal>ati_unfree</literal> + driver, 1.17 is still used due to an ABI incompatibility. + </para> + </listitem> + <listitem> + <para> + This release is based on Glibc 2.24, GCC 5.4.0 and systemd 231. + The default Linux kernel remains 4.4. + </para> + </listitem> + </itemizedlist> + <para> + The following new services were added since the last release: + </para> + <itemizedlist spacing="compact"> + <listitem> + <para> + <literal>(this will get automatically generated at release time)</literal> + </para> + </listitem> + </itemizedlist> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + A large number of packages have been converted to use the + multiple outputs feature of Nix to greatly reduce the amount of + required disk space, as mentioned above. This may require + changes to any custom packages to make them build again; see the + relevant chapter in the Nixpkgs manual for more information. + (Additional caveat to packagers: some packaging conventions + related to multiple-output packages + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/14766">were + changed</link> late (August 2016) in the release cycle and + differ from the initial introduction of multiple outputs.) + </para> + </listitem> + <listitem> + <para> + Previous versions of Nixpkgs had support for all versions of the + LTS Haskell package set. That support has been dropped. The + previously provided <literal>haskell.packages.lts-x_y</literal> + package sets still exist in name to aviod breaking user code, + but these package sets don't actually contain the versions + mandated by the corresponding LTS release. Instead, our package + set it loosely based on the latest available LTS release, i.e. + LTS 7.x at the time of this writing. New releases of NixOS and + Nixpkgs will drop those old names entirely. + <link xlink:href="https://nixos.org/nix-dev/2016-June/020585.html">The + motivation for this change</link> has been discussed at length + on the <literal>nix-dev</literal> mailing list and in + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/14897">Github + issue #14897</link>. Development strategies for Haskell hackers + who want to rely on Nix and NixOS have been described in + <link xlink:href="https://nixos.org/nix-dev/2016-June/020642.html">another + nix-dev article</link>. + </para> + </listitem> + <listitem> + <para> + Shell aliases for systemd sub-commands + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/15598">were + dropped</link>: <literal>start</literal>, + <literal>stop</literal>, <literal>restart</literal>, + <literal>status</literal>. + </para> + </listitem> + <listitem> + <para> + Redis now binds to 127.0.0.1 only instead of listening to all + network interfaces. This is the default behavior of Redis 3.2 + </para> + </listitem> + <listitem> + <para> + <literal>/var/empty</literal> is now immutable. Activation + script runs <literal>chattr +i</literal> to forbid any + modifications inside the folder. See + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/18365"> + the pull request</link> for what bugs this caused. + </para> + </listitem> + <listitem> + <para> + Gitlab's maintainance script <literal>gitlab-runner</literal> + was removed and split up into the more clearer + <literal>gitlab-run</literal> and <literal>gitlab-rake</literal> + scripts, because <literal>gitlab-runner</literal> is a component + of Gitlab CI. + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.libinput.accelProfile</literal> + default changed from <literal>flat</literal> to + <literal>adaptive</literal>, as per + <link xlink:href="https://wayland.freedesktop.org/libinput/doc/latest/group__config.html#gad63796972347f318b180e322e35cee79"> + official documentation</link>. + </para> + </listitem> + <listitem> + <para> + <literal>fonts.fontconfig.ultimate.rendering</literal> was + removed because our presets were obsolete for some time. New + presets are hardcoded into FreeType; you can select a preset via + <literal>fonts.fontconfig.ultimate.preset</literal>. You can + customize those presets via ordinary environment variables, + using <literal>environment.variables</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>audit</literal> service is no longer enabled by + default. Use <literal>security.audit.enable = true</literal> to + explicitly enable it. + </para> + </listitem> + <listitem> + <para> + <literal>pkgs.linuxPackages.virtualbox</literal> now contains + only the kernel modules instead of the VirtualBox user space + binaries. If you want to reference the user space binaries, you + have to use the new <literal>pkgs.virtualbox</literal> instead. + </para> + </listitem> + <listitem> + <para> + <literal>goPackages</literal> was replaced with separated Go + applications in appropriate <literal>nixpkgs</literal> + categories. Each Go package uses its own dependency set. There's + also a new <literal>go2nix</literal> tool introduced to generate + a Go package definition from its Go source automatically. + </para> + </listitem> + <listitem> + <para> + <literal>services.mongodb.extraConfig</literal> configuration + format was changed to YAML. + </para> + </listitem> + <listitem> + <para> + PHP has been upgraded to 7.0 + </para> + </listitem> + </itemizedlist> + <para> + Other notable improvements: + </para> + <itemizedlist> + <listitem> + <para> + Revamped grsecurity/PaX support. There is now only a single + general-purpose distribution kernel and the configuration + interface has been streamlined. Desktop users should be able to + simply set + </para> + <programlisting language="bash"> +{ + security.grsecurity.enable = true; +} +</programlisting> + <para> + to get a reasonably secure system without having to sacrifice + too much functionality. + </para> + </listitem> + <listitem> + <para> + Special filesystems, like <literal>/proc</literal>, + <literal>/run</literal> and others, now have the same mount + options as recommended by systemd and are unified across + different places in NixOS. Mount options are updated during + <literal>nixos-rebuild switch</literal> if possible. One benefit + from this is improved security — most such filesystems are now + mounted with <literal>noexec</literal>, <literal>nodev</literal> + and/or <literal>nosuid</literal> options. + </para> + </listitem> + <listitem> + <para> + The reverse path filter was interfering with DHCPv4 server + operation in the past. An exception for DHCPv4 and a new option + to log packets that were dropped due to the reverse path filter + was added + (<literal>networking.firewall.logReversePathDrops</literal>) for + easier debugging. + </para> + </listitem> + <listitem> + <para> + Containers configuration within + <literal>containers.<name>.config</literal> is + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/17365">now + properly typed and checked</link>. In particular, partial + configurations are merged correctly. + </para> + </listitem> + <listitem> + <para> + The directory container setuid wrapper programs, + <literal>/var/setuid-wrappers</literal>, + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/18124">is + now updated atomically to prevent failures if the switch to a + new configuration is interrupted.</link> + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.startGnuPGAgent</literal> has been + removed due to GnuPG 2.1.x bump. See + <link xlink:href="https://github.com/NixOS/nixpkgs/commit/5391882ebd781149e213e8817fba6ac3c503740c"> + how to achieve similar behavior</link>. You might need to + <literal>pkill gpg-agent</literal> after the upgrade to prevent + a stale agent being in the way. + </para> + </listitem> + <listitem> + <para> + <link xlink:href="https://github.com/NixOS/nixpkgs/commit/e561edc322d275c3687fec431935095cfc717147"> + Declarative users could share the uid due to the bug in the + script handling conflict resolution. </link> + </para> + </listitem> + <listitem> + <para> + Gummi boot has been replaced using systemd-boot. + </para> + </listitem> + <listitem> + <para> + Hydra package and NixOS module were added for convenience. + </para> + </listitem> + </itemizedlist> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1703.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1703.section.xml new file mode 100644 index 00000000000..1119ec53dfc --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1703.section.xml @@ -0,0 +1,818 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-17.03"> + <title>Release 17.03 (<quote>Gorilla</quote>, 2017/03/31)</title> + <section xml:id="sec-release-17.03-highlights"> + <title>Highlights</title> + <para> + In addition to numerous new and upgraded packages, this release + has the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + Nixpkgs is now extensible through overlays. See the + <link xlink:href="https://nixos.org/nixpkgs/manual/#sec-overlays-install">Nixpkgs + manual</link> for more information. + </para> + </listitem> + <listitem> + <para> + This release is based on Glibc 2.25, GCC 5.4.0 and systemd + 232. The default Linux kernel is 4.9 and Nix is at 1.11.8. + </para> + </listitem> + <listitem> + <para> + The default desktop environment now is KDE's Plasma 5. KDE 4 + has been removed + </para> + </listitem> + <listitem> + <para> + The setuid wrapper functionality now supports setting + capabilities. + </para> + </listitem> + <listitem> + <para> + X.org server uses branch 1.19. Due to ABI incompatibilities, + <literal>ati_unfree</literal> keeps forcing 1.17 and + <literal>amdgpu-pro</literal> starts forcing 1.18. + </para> + </listitem> + <listitem> + <para> + Cross compilation has been rewritten. See the nixpkgs manual + for details. The most obvious breaking change is that in + derivations there is no <literal>.nativeDrv</literal> nor + <literal>.crossDrv</literal> are now cross by default, not + native. + </para> + </listitem> + <listitem> + <para> + The <literal>overridePackages</literal> function has been + rewritten to be replaced by + <link xlink:href="https://nixos.org/nixpkgs/manual/#sec-overlays-install"> + overlays</link> + </para> + </listitem> + <listitem> + <para> + Packages in nixpkgs can be marked as insecure through listed + vulnerabilities. See the + <link xlink:href="https://nixos.org/nixpkgs/manual/#sec-allow-insecure">Nixpkgs + manual</link> for more information. + </para> + </listitem> + <listitem> + <para> + PHP now defaults to PHP 7.1 + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-17.03-new-services"> + <title>New Services</title> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>hardware/ckb.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hardware/mcelog.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hardware/usb-wwan.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hardware/video/capture/mwprocapture.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/adb.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/chromium.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/gphoto2.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/java.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/mtr.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/oblogout.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/vim.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/wireshark.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>security/dhparams.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/audio/ympd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/computing/boinc/client.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/continuous-integration/buildbot/master.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/continuous-integration/buildbot/worker.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/continuous-integration/gitlab-runner.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/databases/riak-cs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/databases/stanchion.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/desktops/gnome3/gnome-terminal-server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/editors/infinoted.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/hardware/illum.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/hardware/trezord.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/logging/journalbeat.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/offlineimap.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/postgrey.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/couchpotato.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/docker-registry.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/errbot.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/geoip-updater.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/gogs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/leaps.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/nix-optimise.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/ssm-agent.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/sssd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/arbtt.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/netdata.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/alertmanager.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/blackbox-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/json-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/nginx-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/node-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/snmp-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/unifi-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/varnish-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/sysstat.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/telegraf.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/vnstat.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/network-filesystems/cachefilesd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/network-filesystems/glusterfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/network-filesystems/ipfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/dante.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/dnscrypt-wrapper.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/fakeroute.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/flannel.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/htpdate.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/miredo.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/nftables.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/powerdns.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/pdns-recursor.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/quagga.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/redsocks.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/wireguard.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/system/cgmanager.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/torrent/opentracker.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/atlassian/confluence.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/atlassian/crowd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/atlassian/jira.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/frab.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/nixbot.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/selfoss.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/quassel-webserver.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/unclutter-xfixes.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/urxvtd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>system/boot/systemd-nspawn.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/ecs-agent.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/lxcfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/openstack/keystone.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>virtualisation/openstack/glance.nix</literal> + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-17.03-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + Derivations have no <literal>.nativeDrv</literal> nor + <literal>.crossDrv</literal> and are now cross by default, not + native. + </para> + </listitem> + <listitem> + <para> + <literal>stdenv.overrides</literal> is now expected to take + <literal>self</literal> and <literal>super</literal> + arguments. See <literal>lib.trivial.extends</literal> for what + those parameters represent. + </para> + </listitem> + <listitem> + <para> + <literal>ansible</literal> now defaults to ansible version 2 + as version 1 has been removed due to a serious + <link xlink:href="https://www.computest.nl/advisories/CT-2017-0109_Ansible.txt"> + vulnerability</link> unpatched by upstream. + </para> + </listitem> + <listitem> + <para> + <literal>gnome</literal> alias has been removed along with + <literal>gtk</literal>, <literal>gtkmm</literal> and several + others. Now you need to use versioned attributes, like + <literal>gnome3</literal>. + </para> + </listitem> + <listitem> + <para> + The attribute name of the Radicale daemon has been changed + from <literal>pythonPackages.radicale</literal> to + <literal>radicale</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>stripHash</literal> bash function in + <literal>stdenv</literal> changed according to its + documentation; it now outputs the stripped name to + <literal>stdout</literal> instead of putting it in the + variable <literal>strippedName</literal>. + </para> + </listitem> + <listitem> + <para> + PHP now scans for extra configuration .ini files in /etc/php.d + instead of /etc. This prevents accidentally loading non-PHP + .ini files that may be in /etc. + </para> + </listitem> + <listitem> + <para> + Two lone top-level dict dbs moved into + <literal>dictdDBs</literal>. This affects: + <literal>dictdWordnet</literal> which is now at + <literal>dictdDBs.wordnet</literal> and + <literal>dictdWiktionary</literal> which is now at + <literal>dictdDBs.wiktionary</literal> + </para> + </listitem> + <listitem> + <para> + Parsoid service now uses YAML configuration format. + <literal>service.parsoid.interwikis</literal> is now called + <literal>service.parsoid.wikis</literal> and is a list of + either API URLs or attribute sets as specified in parsoid's + documentation. + </para> + </listitem> + <listitem> + <para> + <literal>Ntpd</literal> was replaced by + <literal>systemd-timesyncd</literal> as the default service to + synchronize system time with a remote NTP server. The old + behavior can be restored by setting + <literal>services.ntp.enable</literal> to + <literal>true</literal>. Upstream time servers for all NTP + implementations are now configured using + <literal>networking.timeServers</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>service.nylon</literal> is now declared using named + instances. As an example: + </para> + <programlisting language="bash"> +{ + services.nylon = { + enable = true; + acceptInterface = "br0"; + bindInterface = "tun1"; + port = 5912; + }; +} +</programlisting> + <para> + should be replaced with: + </para> + <programlisting language="bash"> +{ + services.nylon.myvpn = { + enable = true; + acceptInterface = "br0"; + bindInterface = "tun1"; + port = 5912; + }; +} +</programlisting> + <para> + this enables you to declare a SOCKS proxy for each uplink. + </para> + </listitem> + <listitem> + <para> + <literal>overridePackages</literal> function no longer exists. + It is replaced by + <link xlink:href="https://nixos.org/nixpkgs/manual/#sec-overlays-install"> + overlays</link>. For example, the following code: + </para> + <programlisting language="bash"> +let + pkgs = import <nixpkgs> {}; +in + pkgs.overridePackages (self: super: ...) +</programlisting> + <para> + should be replaced by: + </para> + <programlisting language="bash"> +let + pkgs = import <nixpkgs> {}; +in + import pkgs.path { overlays = [(self: super: ...)]; } +</programlisting> + </listitem> + <listitem> + <para> + Autoloading connection tracking helpers is now disabled by + default. This default was also changed in the Linux kernel and + is considered insecure if not configured properly in your + firewall. If you need connection tracking helpers (i.e. for + active FTP) please enable + <literal>networking.firewall.autoLoadConntrackHelpers</literal> + and tune + <literal>networking.firewall.connectionTrackingModules</literal> + to suit your needs. + </para> + </listitem> + <listitem> + <para> + <literal>local_recipient_maps</literal> is not set to empty + value by Postfix service. It's an insecure default as stated + by Postfix documentation. Those who want to retain this + setting need to set it via + <literal>services.postfix.extraConfig</literal>. + </para> + </listitem> + <listitem> + <para> + Iputils no longer provide ping6 and traceroute6. The + functionality of these tools has been integrated into ping and + traceroute respectively. To enforce an address family the new + flags <literal>-4</literal> and <literal>-6</literal> have + been added. One notable incompatibility is that specifying an + interface (for link-local IPv6 for instance) is no longer done + with the <literal>-I</literal> flag, but by encoding the + interface into the address + (<literal>ping fe80::1%eth0</literal>). + </para> + </listitem> + <listitem> + <para> + The socket handling of the <literal>services.rmilter</literal> + module has been fixed and refactored. As rmilter doesn't + support binding to more than one socket, the options + <literal>bindUnixSockets</literal> and + <literal>bindInetSockets</literal> have been replaced by + <literal>services.rmilter.bindSocket.*</literal>. The default + is still a unix socket in + <literal>/run/rmilter/rmilter.sock</literal>. Refer to the + options documentation for more information. + </para> + </listitem> + <listitem> + <para> + The <literal>fetch*</literal> functions no longer support md5, + please use sha256 instead. + </para> + </listitem> + <listitem> + <para> + The dnscrypt-proxy module interface has been streamlined + around the <literal>extraArgs</literal> option. Where + possible, legacy option declarations are mapped to + <literal>extraArgs</literal> but will emit warnings. The + <literal>resolverList</literal> has been outright removed: to + use an unlisted resolver, use the + <literal>customResolver</literal> option. + </para> + </listitem> + <listitem> + <para> + torbrowser now stores local state under + <literal>~/.local/share/tor-browser</literal> by default. Any + browser profile data from the old location, + <literal>~/.torbrowser4</literal>, must be migrated manually. + </para> + </listitem> + <listitem> + <para> + The ihaskell, monetdb, offlineimap and sitecopy services have + been removed. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-17.03-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + Module type system have a new extensible option types feature + that allow to extend certain types, such as enum, through + multiple option declarations of the same option across + multiple modules. + </para> + </listitem> + <listitem> + <para> + <literal>jre</literal> now defaults to GTK UI by default. This + improves visual consistency and makes Java follow system font + style, improving the situation on HighDPI displays. This has a + cost of increased closure size; for server and other headless + workloads it's recommended to use + <literal>jre_headless</literal>. + </para> + </listitem> + <listitem> + <para> + Python 2.6 interpreter and package set have been removed. + </para> + </listitem> + <listitem> + <para> + The Python 2.7 interpreter does not use modules anymore. + Instead, all CPython interpreters now include the whole + standard library except for `tkinter`, which is available in + the Python package set. + </para> + </listitem> + <listitem> + <para> + Python 2.7, 3.5 and 3.6 are now built deterministically and + 3.4 mostly. Minor modifications had to be made to the + interpreters in order to generate deterministic bytecode. This + has security implications and is relevant for those using + Python in a <literal>nix-shell</literal>. See the Nixpkgs + manual for details. + </para> + </listitem> + <listitem> + <para> + The Python package sets now use a fixed-point combinator and + the sets are available as attributes of the interpreters. + </para> + </listitem> + <listitem> + <para> + The Python function <literal>buildPythonPackage</literal> has + been improved and can be used to build from Setuptools source, + Flit source, and precompiled Wheels. + </para> + </listitem> + <listitem> + <para> + When adding new or updating current Python libraries, the + expressions should be put in separate files in + <literal>pkgs/development/python-modules</literal> and called + from <literal>python-packages.nix</literal>. + </para> + </listitem> + <listitem> + <para> + The dnscrypt-proxy service supports synchronizing the list of + public resolvers without working DNS resolution. This fixes + issues caused by the resolver list becoming outdated. It also + improves the viability of DNSCrypt only configurations. + </para> + </listitem> + <listitem> + <para> + Containers using bridged networking no longer lose their + connection after changes to the host networking. + </para> + </listitem> + <listitem> + <para> + ZFS supports pool auto scrubbing. + </para> + </listitem> + <listitem> + <para> + The bind DNS utilities (e.g. dig) have been split into their + own output and are now also available in + <literal>pkgs.dnsutils</literal> and it is no longer necessary + to pull in all of <literal>bind</literal> to use them. + </para> + </listitem> + <listitem> + <para> + Per-user configuration was moved from + <literal>~/.nixpkgs</literal> to + <literal>~/.config/nixpkgs</literal>. The former is still + valid for <literal>config.nix</literal> for backwards + compatibility. + </para> + </listitem> + </itemizedlist> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1709.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1709.section.xml new file mode 100644 index 00000000000..8f0efe816e5 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1709.section.xml @@ -0,0 +1,922 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-17.09"> + <title>Release 17.09 (<quote>Hummingbird</quote>, 2017/09/??)</title> + <section xml:id="sec-release-17.09-highlights"> + <title>Highlights</title> + <para> + In addition to numerous new and upgraded packages, this release + has the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + The GNOME version is now 3.24. KDE Plasma was upgraded to + 5.10, KDE Applications to 17.08.1 and KDE Frameworks to 5.37. + </para> + </listitem> + <listitem> + <para> + The user handling now keeps track of deallocated UIDs/GIDs. + When a user or group is revived, this allows it to be + allocated the UID/GID it had before. A consequence is that + UIDs and GIDs are no longer reused. + </para> + </listitem> + <listitem> + <para> + The module option + <literal>services.xserver.xrandrHeads</literal> now causes the + first head specified in this list to be set as the primary + head. Apart from that, it's now possible to also set + additional options by using an attribute set, for example: + </para> + <programlisting language="bash"> +{ services.xserver.xrandrHeads = [ + "HDMI-0" + { + output = "DVI-0"; + primary = true; + monitorConfig = '' + Option "Rotate" "right" + ''; + } + ]; +} +</programlisting> + <para> + This will set the <literal>DVI-0</literal> output to be the + primary head, even though <literal>HDMI-0</literal> is the + first head in the list. + </para> + </listitem> + <listitem> + <para> + The handling of SSL in the <literal>services.nginx</literal> + module has been cleaned up, renaming the misnamed + <literal>enableSSL</literal> to <literal>onlySSL</literal> + which reflects its original intention. This is not to be used + with the already existing <literal>forceSSL</literal> which + creates a second non-SSL virtual host redirecting to the SSL + virtual host. This by chance had worked earlier due to + specific implementation details. In case you had specified + both please remove the <literal>enableSSL</literal> option to + keep the previous behaviour. + </para> + <para> + Another <literal>addSSL</literal> option has been introduced + to configure both a non-SSL virtual host and an SSL virtual + host with the same configuration. + </para> + <para> + Options to configure <literal>resolver</literal> options and + <literal>upstream</literal> blocks have been introduced. See + their information for further details. + </para> + <para> + The <literal>port</literal> option has been replaced by a more + generic <literal>listen</literal> option which makes it + possible to specify multiple addresses, ports and SSL configs + dependant on the new SSL handling mentioned above. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-17.09-new-services"> + <title>New Services</title> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>config/fonts/fontconfig-penultimate.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>config/fonts/fontconfig-ultimate.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>config/terminfo.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hardware/sensor/iio.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hardware/nitrokey.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>hardware/raid/hpsa.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/browserpass.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/gnupg.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/qt5ct.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/slock.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs/thefuck.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>security/auditd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>security/lock-kernel-modules.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>service-managers/docker.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>service-managers/trivial.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/admin/salt/master.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/admin/salt/minion.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/audio/slimserver.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/cluster/kubernetes/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/cluster/kubernetes/dns.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/cluster/kubernetes/dashboard.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/continuous-integration/hail.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/databases/clickhouse.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/databases/postage.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/desktops/gnome3/gnome-disks.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/desktops/gnome3/gpaste.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/logging/SystemdJournal2Gelf.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/logging/heartbeat.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/logging/journalwatch.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/logging/syslogd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/mailhog.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/mail/nullmailer.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/airsonic.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/autorandr.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/exhibitor.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/fstrim.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/gollum.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/irkerd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/jackett.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/radarr.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/misc/snapper.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/osquery.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/collectd-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/monitoring/prometheus/fritzbox-exporter.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/network-filesystems/kbfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/dnscache.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/fireqos.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/iwd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/keepalived/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/keybase.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/lldpd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/matterbridge.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/squid.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/tinydns.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/networking/xrdp.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/shibboleth-sp.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/sks.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/sshguard.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/torify.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/usbguard.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/security/vault.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/system/earlyoom.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/system/saslauthd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/nexus.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/pgpkeyserver-lite.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-apps/piwik.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-servers/lighttpd/collectd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/web-servers/minio.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/display-managers/xpra.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services/x11/xautolock.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>tasks/filesystems/bcachefs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>tasks/powertop.nix</literal> + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-17.09-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + <emphasis role="strong">In an Qemu-based virtualization + environment, the network interface names changed from i.e. + <literal>enp0s3</literal> to + <literal>ens3</literal>.</emphasis> + </para> + <para> + This is due to a kernel configuration change. The new naming + is consistent with those of other Linux distributions with + systemd. See + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/29197">#29197</link> + for more information. + </para> + <para> + A machine is affected if the <literal>virt-what</literal> tool + either returns <literal>qemu</literal> or + <literal>kvm</literal> <emphasis>and</emphasis> has interface + names used in any part of its NixOS configuration, in + particular if a static network configuration with + <literal>networking.interfaces</literal> is used. + </para> + <para> + Before rebooting affected machines, please ensure: + </para> + <itemizedlist> + <listitem> + <para> + Change the interface names in your NixOS configuration. + The first interface will be called + <literal>ens3</literal>, the second one + <literal>ens8</literal> and starting from there + incremented by 1. + </para> + </listitem> + <listitem> + <para> + After changing the interface names, rebuild your system + with <literal>nixos-rebuild boot</literal> to activate the + new configuration after a reboot. If you switch to the new + configuration right away you might lose network + connectivity! If using <literal>nixops</literal>, deploy + with <literal>nixops deploy --force-reboot</literal>. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The following changes apply if the + <literal>stateVersion</literal> is changed to 17.09 or higher. + For <literal>stateVersion = "17.03"</literal> or + lower the old behavior is preserved. + </para> + <itemizedlist> + <listitem> + <para> + The <literal>postgres</literal> default version was + changed from 9.5 to 9.6. + </para> + </listitem> + <listitem> + <para> + The <literal>postgres</literal> superuser name has changed + from <literal>root</literal> to + <literal>postgres</literal> to more closely follow what + other Linux distributions are doing. + </para> + </listitem> + <listitem> + <para> + The <literal>postgres</literal> default + <literal>dataDir</literal> has changed from + <literal>/var/db/postgres</literal> to + <literal>/var/lib/postgresql/$psqlSchema</literal> where + $psqlSchema is 9.6 for example. + </para> + </listitem> + <listitem> + <para> + The <literal>mysql</literal> default + <literal>dataDir</literal> has changed from + <literal>/var/mysql</literal> to + <literal>/var/lib/mysql</literal>. + </para> + </listitem> + <listitem> + <para> + Radicale's default package has changed from 1.x to 2.x. + Instructions to migrate can be found + <link xlink:href="http://radicale.org/1to2/"> here + </link>. It is also possible to use the newer version by + setting the <literal>package</literal> to + <literal>radicale2</literal>, which is done automatically + when <literal>stateVersion</literal> is 17.09 or higher. + The <literal>extraArgs</literal> option has been added to + allow passing the data migration arguments specified in + the instructions; see the <literal>radicale.nix</literal> + NixOS test for an example migration. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The <literal>aiccu</literal> package was removed. This is due + to SixXS <link xlink:href="https://www.sixxs.net/main/"> + sunsetting</link> its IPv6 tunnel. + </para> + </listitem> + <listitem> + <para> + The <literal>fanctl</literal> package and + <literal>fan</literal> module have been removed due to the + developers not upstreaming their iproute2 patches and lagging + with compatibility to recent iproute2 versions. + </para> + </listitem> + <listitem> + <para> + Top-level <literal>idea</literal> package collection was + renamed. All JetBrains IDEs are now at + <literal>jetbrains</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>flexget</literal>'s state database cannot be upgraded + to its new internal format, requiring removal of any existing + <literal>db-config.sqlite</literal> which will be + automatically recreated. + </para> + </listitem> + <listitem> + <para> + The <literal>ipfs</literal> service now doesn't ignore the + <literal>dataDir</literal> option anymore. If you've ever set + this option to anything other than the default you'll have to + either unset it (so the default gets used) or migrate the old + data manually with + </para> + <programlisting> +dataDir=<valueOfDataDir> +mv /var/lib/ipfs/.ipfs/* $dataDir +rmdir /var/lib/ipfs/.ipfs +</programlisting> + </listitem> + <listitem> + <para> + The <literal>caddy</literal> service was previously using an + extra <literal>.caddy</literal> directory in the data + directory specified with the <literal>dataDir</literal> + option. The contents of the <literal>.caddy</literal> + directory are now expected to be in the + <literal>dataDir</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>ssh-agent</literal> user service is not started + by default anymore. Use + <literal>programs.ssh.startAgent</literal> to enable it if + needed. There is also a new + <literal>programs.gnupg.agent</literal> module that creates a + <literal>gpg-agent</literal> user service. It can also serve + as a SSH agent if <literal>enableSSHSupport</literal> is set. + </para> + </listitem> + <listitem> + <para> + The + <literal>services.tinc.networks.<name>.listenAddress</literal> + option had a misleading name that did not correspond to its + behavior. It now correctly defines the ip to listen for + incoming connections on. To keep the previous behaviour, use + <literal>services.tinc.networks.<name>.bindToAddress</literal> + instead. Refer to the description of the options for more + details. + </para> + </listitem> + <listitem> + <para> + <literal>tlsdate</literal> package and module were removed. + This is due to the project being dead and not building with + openssl 1.1. + </para> + </listitem> + <listitem> + <para> + <literal>wvdial</literal> package and module were removed. + This is due to the project being dead and not building with + openssl 1.1. + </para> + </listitem> + <listitem> + <para> + <literal>cc-wrapper</literal>'s setup-hook now exports a + number of environment variables corresponding to binutils + binaries, (e.g. <literal>LD</literal>, + <literal>STRIP</literal>, <literal>RANLIB</literal>, etc). + This is done to prevent packages' build systems guessing, + which is harder to predict, especially when cross-compiling. + However, some packages have broken due to this—their build + systems either not supporting, or claiming to support without + adequate testing, taking such environment variables as + parameters. + </para> + </listitem> + <listitem> + <para> + <literal>services.firefox.syncserver</literal> now runs by + default as a non-root user. To accomodate this change, the + default sqlite database location has also been changed. + Migration should work automatically. Refer to the description + of the options for more details. + </para> + </listitem> + <listitem> + <para> + The <literal>compiz</literal> window manager and package was + removed. The system support had been broken for several years. + </para> + </listitem> + <listitem> + <para> + Touchpad support should now be enabled through + <literal>libinput</literal> as <literal>synaptics</literal> is + now deprecated. See the option + <literal>services.xserver.libinput.enable</literal>. + </para> + </listitem> + <listitem> + <para> + grsecurity/PaX support has been dropped, following upstream's + decision to cease free support. See + <link xlink:href="https://grsecurity.net/passing_the_baton.php"> + upstream's announcement</link> for more information. No + complete replacement for grsecurity/PaX is available + presently. + </para> + </listitem> + <listitem> + <para> + <literal>services.mysql</literal> now has declarative + configuration of databases and users with the + <literal>ensureDatabases</literal> and + <literal>ensureUsers</literal> options. + </para> + <para> + These options will never delete existing databases and users, + especially not when the value of the options are changed. + </para> + <para> + The MySQL users will be identified using + <link xlink:href="https://mariadb.com/kb/en/library/authentication-plugin-unix-socket/"> + Unix socket authentication</link>. This authenticates the Unix + user with the same name only, and that without the need for a + password. + </para> + <para> + If you have previously created a MySQL <literal>root</literal> + user <emphasis>with a password</emphasis>, you will need to + add <literal>root</literal> user for unix socket + authentication before using the new options. This can be done + by running the following SQL script: + </para> + <programlisting language="SQL"> +CREATE USER 'root'@'%' IDENTIFIED BY ''; +GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' WITH GRANT OPTION; +FLUSH PRIVILEGES; + +-- Optionally, delete the password-authenticated user: +-- DROP USER 'root'@'localhost'; +</programlisting> + </listitem> + <listitem> + <para> + <literal>services.mysqlBackup</literal> now works by default + without any user setup, including for users other than + <literal>mysql</literal>. + </para> + <para> + By default, the <literal>mysql</literal> user is no longer the + user which performs the backup. Instead a system account + <literal>mysqlbackup</literal> is used. + </para> + <para> + The <literal>mysqlBackup</literal> service is also now using + systemd timers instead of <literal>cron</literal>. + </para> + <para> + Therefore, the <literal>services.mysqlBackup.period</literal> + option no longer exists, and has been replaced with + <literal>services.mysqlBackup.calendar</literal>, which is in + the format of + <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.time.html#Calendar%20Events">systemd.time(7)</link>. + </para> + <para> + If you expect to be sent an e-mail when the backup fails, + consider using a script which monitors the systemd journal for + errors. Regretfully, at present there is no built-in + functionality for this. + </para> + <para> + You can check that backups still work by running + <literal>systemctl start mysql-backup</literal> then + <literal>systemctl status mysql-backup</literal>. + </para> + </listitem> + <listitem> + <para> + Templated systemd services e.g + <literal>container@name</literal> are now handled currectly + when switching to a new configuration, resulting in them being + reloaded. + </para> + </listitem> + <listitem> + <para> + Steam: the <literal>newStdcpp</literal> parameter was removed + and should not be needed anymore. + </para> + </listitem> + <listitem> + <para> + Redis has been updated to version 4 which mandates a cluster + mass-restart, due to changes in the network handling, in order + to ensure compatibility with networks NATing traffic. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-17.09-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + Modules can now be disabled by using + <link xlink:href="https://nixos.org/nixpkgs/manual/#sec-replace-modules"> + disabledModules</link>, allowing another to take it's place. + This can be used to import a set of modules from another + channel while keeping the rest of the system on a stable + release. + </para> + </listitem> + <listitem> + <para> + Updated to FreeType 2.7.1, including a new TrueType engine. + The new engine replaces the Infinality engine which was the + default in NixOS. The default font rendering settings are now + provided by fontconfig-penultimate, replacing + fontconfig-ultimate; the new defaults are less invasive and + provide rendering that is more consistent with other systems + and hopefully with each font designer's intent. Some + system-wide configuration has been removed from the Fontconfig + NixOS module where user Fontconfig settings are available. + </para> + </listitem> + <listitem> + <para> + ZFS/SPL have been updated to 0.7.0, + <literal>zfsUnstable, splUnstable</literal> have therefore + been removed. + </para> + </listitem> + <listitem> + <para> + The <literal>time.timeZone</literal> option now allows the + value <literal>null</literal> in addition to timezone strings. + This value allows changing the timezone of a system + imperatively using + <literal>timedatectl set-timezone</literal>. The default + timezone is still UTC. + </para> + </listitem> + <listitem> + <para> + Nixpkgs overlays may now be specified with a file as well as a + directory. The value of + <literal><nixpkgs-overlays></literal> may be a file, and + <literal>~/.config/nixpkgs/overlays.nix</literal> can be used + instead of the <literal>~/.config/nixpkgs/overlays</literal> + directory. + </para> + <para> + See the overlays chapter of the Nixpkgs manual for more + details. + </para> + </listitem> + <listitem> + <para> + Definitions for <literal>/etc/hosts</literal> can now be + specified declaratively with + <literal>networking.hosts</literal>. + </para> + </listitem> + <listitem> + <para> + Two new options have been added to the installer loader, in + addition to the default having changed. The kernel log + verbosity has been lowered to the upstream default for the + default options, in order to not spam the console when e.g. + joining a network. + </para> + <para> + This therefore leads to adding a new <literal>debug</literal> + option to set the log level to the previous verbose mode, to + make debugging easier, but still accessible easily. + </para> + <para> + Additionally a <literal>copytoram</literal> option has been + added, which makes it possible to remove the install medium + after booting. This allows tethering from your phone after + booting from it. + </para> + </listitem> + <listitem> + <para> + <literal>services.gitlab-runner.configOptions</literal> has + been added to specify the configuration of gitlab-runners + declaratively. + </para> + </listitem> + <listitem> + <para> + <literal>services.jenkins.plugins</literal> has been added to + install plugins easily, this can be generated with + jenkinsPlugins2nix. + </para> + </listitem> + <listitem> + <para> + <literal>services.postfix.config</literal> has been added to + specify the main.cf with NixOS options. Additionally other + options have been added to the postfix module and has been + improved further. + </para> + </listitem> + <listitem> + <para> + The GitLab package and module have been updated to the latest + 10.0 release. + </para> + </listitem> + <listitem> + <para> + The <literal>systemd-boot</literal> boot loader now lists the + NixOS version, kernel version and build date of all bootable + generations. + </para> + </listitem> + <listitem> + <para> + The dnscrypt-proxy service now defaults to using a random + upstream resolver, selected from the list of public + non-logging resolvers with DNSSEC support. Existing + configurations can be migrated to this mode of operation by + omitting the + <literal>services.dnscrypt-proxy.resolverName</literal> option + or setting it to <literal>"random"</literal>. + </para> + </listitem> + </itemizedlist> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1803.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1803.section.xml new file mode 100644 index 00000000000..f54f6129e0d --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1803.section.xml @@ -0,0 +1,871 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-18.03"> + <title>Release 18.03 (<quote>Impala</quote>, 2018/04/04)</title> + <section xml:id="sec-release-18.03-highlights"> + <title>Highlights</title> + <para> + In addition to numerous new and upgraded packages, this release + has the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + End of support is planned for end of October 2018, handing + over to 18.09. + </para> + </listitem> + <listitem> + <para> + Platform support: x86_64-linux and x86_64-darwin since release + time (the latter isn't NixOS, really). Binaries for + aarch64-linux are available, but no channel exists yet, as + it's waiting for some test fixes, etc. + </para> + </listitem> + <listitem> + <para> + Nix now defaults to 2.0; see its + <link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-2.0">release + notes</link>. + </para> + </listitem> + <listitem> + <para> + Core version changes: linux: 4.9 -> 4.14, glibc: 2.25 -> + 2.26, gcc: 6 -> 7, systemd: 234 -> 237. + </para> + </listitem> + <listitem> + <para> + Desktop version changes: gnome: 3.24 -> 3.26, (KDE) + plasma-desktop: 5.10 -> 5.12. + </para> + </listitem> + <listitem> + <para> + MariaDB 10.2, updated from 10.1, is now the default MySQL + implementation. While upgrading a few changes have been made + to the infrastructure involved: + </para> + <itemizedlist> + <listitem> + <para> + <literal>libmysql</literal> has been deprecated, please + use <literal>mysql.connector-c</literal> instead, a + compatibility passthru has been added to the MySQL + packages. + </para> + </listitem> + <listitem> + <para> + The <literal>mysql57</literal> package has a new + <literal>static</literal> output containing the static + libraries including <literal>libmysqld.a</literal> + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + PHP now defaults to PHP 7.2, updated from 7.1. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-18.03-new-services"> + <title>New Services</title> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>./config/krb5/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./hardware/digitalbitbox.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./misc/label.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/ccache.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/criu.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/digitalbitbox/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/less.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/npm.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/plotinus.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/rootston.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/systemtap.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/sway.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/udevil.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/way-cooler.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/yabar.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/zsh/zsh-autoenv.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/borgbackup.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/crashplan-small-business.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/dleyna-renderer.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/dleyna-server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/pipewire.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/gnome3/chrome-gnome-shell.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/gnome3/tracker-miners.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/hardware/fwupd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/hardware/interception-tools.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/hardware/u2f.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/hardware/usbmuxd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/mail/clamsmtp.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/mail/dkimproxy-out.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/mail/pfix-srsd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/gitea.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/home-assistant.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/ihaskell.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/logkeys.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/novacomd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/osrm.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/plexpy.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/pykms.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/tzupdate.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/monitoring/fusion-inventory.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/monitoring/prometheus/exporters.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/network-filesystems/beegfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/network-filesystems/davfs2.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/network-filesystems/openafs/client.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/network-filesystems/openafs/server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/network-filesystems/ceph.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/aria2.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/monero.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/nghttpx/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/nixops-dns.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/rxe.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/stunnel.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/matomo.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/restya-board.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-servers/mighttpd2.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/x11/fractalart.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./system/boot/binfmt.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./system/boot/grow-partition.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./tasks/filesystems/ecryptfs.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./virtualisation/hyperv-guest.nix</literal> + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-18.03-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + <literal>sound.enable</literal> now defaults to false. + </para> + </listitem> + <listitem> + <para> + Dollar signs in options under + <literal>services.postfix</literal> are passed verbatim to + Postfix, which will interpret them as the beginning of a + parameter expression. This was already true for string-valued + options in the previous release, but not for list-valued + options. If you need to pass literal dollar signs through + Postfix, double them. + </para> + </listitem> + <listitem> + <para> + The <literal>postage</literal> package (for web-based + PostgreSQL administration) has been renamed to + <literal>pgmanage</literal>. The corresponding module has also + been renamed. To migrate please rename all + <literal>services.postage</literal> options to + <literal>services.pgmanage</literal>. + </para> + </listitem> + <listitem> + <para> + Package attributes starting with a digit have been prefixed + with an underscore sign. This is to avoid quoting in the + configuration and other issues with command-line tools like + <literal>nix-env</literal>. The change affects the following + packages: + </para> + <itemizedlist> + <listitem> + <para> + <literal>2048-in-terminal</literal> → + <literal>_2048-in-terminal</literal> + </para> + </listitem> + <listitem> + <para> + <literal>90secondportraits</literal> → + <literal>_90secondportraits</literal> + </para> + </listitem> + <listitem> + <para> + <literal>2bwm</literal> → <literal>_2bwm</literal> + </para> + </listitem> + <listitem> + <para> + <literal>389-ds-base</literal> → + <literal>_389-ds-base</literal> + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + <emphasis role="strong">The OpenSSH service no longer enables + support for DSA keys by default, which could cause a system + lock out. Update your keys or, unfavorably, re-enable DSA + support manually.</emphasis> + </para> + <para> + DSA support was + <link xlink:href="https://www.openssh.com/legacy.html">deprecated + in OpenSSH 7.0</link>, due to it being too weak. To re-enable + support, add + <literal>PubkeyAcceptedKeyTypes +ssh-dss</literal> to the end + of your <literal>services.openssh.extraConfig</literal>. + </para> + <para> + After updating the keys to be stronger, anyone still on a + pre-17.03 version is safe to jump to 17.03, as vetted + <link xlink:href="https://search.nix.gsc.io/?q=stateVersion">here</link>. + </para> + </listitem> + <listitem> + <para> + The <literal>openssh</literal> package now includes Kerberos + support by default; the + <literal>openssh_with_kerberos</literal> package is now a + deprecated alias. If you do not want Kerberos support, you can + do + <literal>openssh.override { withKerberos = false; }</literal>. + Note, this also applies to the <literal>openssh_hpn</literal> + package. + </para> + </listitem> + <listitem> + <para> + <literal>cc-wrapper</literal> has been split in two; there is + now also a <literal>bintools-wrapper</literal>. The most + commonly used files in <literal>nix-support</literal> are now + split between the two wrappers. Some commonly used ones, like + <literal>nix-support/dynamic-linker</literal>, are duplicated + for backwards compatability, even though they rightly belong + only in <literal>bintools-wrapper</literal>. Other more + obscure ones are just moved. + </para> + </listitem> + <listitem> + <para> + The propagation logic has been changed. The new logic, along + with new types of dependencies that go with, is thoroughly + documented in the "Specifying dependencies" section + of the "Standard Environment" chapter of the nixpkgs + manual. The old logic isn't but is easy to describe: + dependencies were propagated as the same type of dependency no + matter what. In practice, that means that many + <literal>propagatedNativeBuildInputs</literal> should instead + be <literal>propagatedBuildInputs</literal>. Thankfully, that + was and is the least used type of dependency. Also, it means + that some <literal>propagatedBuildInputs</literal> should + instead be <literal>depsTargetTargetPropagated</literal>. + Other types dependencies should be unaffected. + </para> + </listitem> + <listitem> + <para> + <literal>lib.addPassthru drv passthru</literal> is removed. + Use <literal>lib.extendDerivation true passthru drv</literal> + instead. + </para> + </listitem> + <listitem> + <para> + The <literal>memcached</literal> service no longer accept + dynamic socket paths via + <literal>services.memcached.socket</literal>. Unix sockets can + be still enabled by + <literal>services.memcached.enableUnixSocket</literal> and + will be accessible at + <literal>/run/memcached/memcached.sock</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>hardware.amdHybridGraphics.disable</literal> + option was removed for lack of a maintainer. If you still need + this module, you may wish to include a copy of it from an + older version of nixos in your imports. + </para> + </listitem> + <listitem> + <para> + The merging of config options for + <literal>services.postfix.config</literal> was buggy. + Previously, if other options in the Postfix module like + <literal>services.postfix.useSrs</literal> were set and the + user set config options that were also set by such options, + the resulting config wouldn't include all options that were + needed. They are now merged correctly. If config options need + to be overridden, <literal>lib.mkForce</literal> or + <literal>lib.mkOverride</literal> can be used. + </para> + </listitem> + <listitem> + <para> + The following changes apply if the + <literal>stateVersion</literal> is changed to 18.03 or higher. + For <literal>stateVersion = "17.09"</literal> or + lower the old behavior is preserved. + </para> + <itemizedlist spacing="compact"> + <listitem> + <para> + <literal>matrix-synapse</literal> uses postgresql by + default instead of sqlite. Migration instructions can be + found + <link xlink:href="https://github.com/matrix-org/synapse/blob/master/docs/postgres.rst#porting-from-sqlite"> + here </link>. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The <literal>jid</literal> package has been removed, due to + maintenance overhead of a go package having non-versioned + dependencies. + </para> + </listitem> + <listitem> + <para> + When using <literal>services.xserver.libinput</literal> + (enabled by default in GNOME), it now handles all input + devices, not just touchpads. As a result, you might need to + re-evaluate any custom Xorg configuration. In particular, + <literal>Option "XkbRules" "base"</literal> + may result in broken keyboard layout. + </para> + </listitem> + <listitem> + <para> + The <literal>attic</literal> package was removed. A maintained + fork called + <link xlink:href="https://www.borgbackup.org/">Borg</link> + should be used instead. Migration instructions can be found + <link xlink:href="http://borgbackup.readthedocs.io/en/stable/usage/upgrade.html#attic-and-borg-0-xx-to-borg-1-x">here</link>. + </para> + </listitem> + <listitem> + <para> + The Piwik analytics software was renamed to Matomo: + </para> + <itemizedlist> + <listitem> + <para> + The package <literal>pkgs.piwik</literal> was renamed to + <literal>pkgs.matomo</literal>. + </para> + </listitem> + <listitem> + <para> + The service <literal>services.piwik</literal> was renamed + to <literal>services.matomo</literal>. + </para> + </listitem> + <listitem> + <para> + The data directory <literal>/var/lib/piwik</literal> was + renamed to <literal>/var/lib/matomo</literal>. All files + will be moved automatically on first startup, but you + might need to adjust your backup scripts. + </para> + </listitem> + <listitem> + <para> + The default <literal>serverName</literal> for the nginx + configuration changed from + <literal>piwik.${config.networking.hostName}</literal> to + <literal>matomo.${config.networking.hostName}.${config.networking.domain}</literal> + if <literal>config.networking.domain</literal> is set, + <literal>matomo.${config.networking.hostName}</literal> if + it is not set. If you change your + <literal>serverName</literal>, remember you'll need to + update the <literal>trustedHosts[]</literal> array in + <literal>/var/lib/matomo/config/config.ini.php</literal> + as well. + </para> + </listitem> + <listitem> + <para> + The <literal>piwik</literal> user was renamed to + <literal>matomo</literal>. The service will adjust + ownership automatically for files in the data directory. + If you use unix socket authentication, remember to give + the new <literal>matomo</literal> user access to the + database and to change the <literal>username</literal> to + <literal>matomo</literal> in the + <literal>[database]</literal> section of + <literal>/var/lib/matomo/config/config.ini.php</literal>. + </para> + </listitem> + <listitem> + <para> + If you named your database `piwik`, you might want to + rename it to `matomo` to keep things clean, but this is + neither enforced nor required. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + <literal>nodejs-4_x</literal> is end-of-life. + <literal>nodejs-4_x</literal>, + <literal>nodejs-slim-4_x</literal> and + <literal>nodePackages_4_x</literal> are removed. + </para> + </listitem> + <listitem> + <para> + The <literal>pump.io</literal> NixOS module was removed. It is + now maintained as an + <link xlink:href="https://github.com/rvl/pump.io-nixos">external + module</link>. + </para> + </listitem> + <listitem> + <para> + The Prosody XMPP server has received a major update. The + following modules were renamed: + </para> + <itemizedlist> + <listitem> + <para> + <literal>services.prosody.modules.httpserver</literal> is + now <literal>services.prosody.modules.http_files</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.prosody.modules.console</literal> is now + <literal>services.prosody.modules.admin_telnet</literal> + </para> + </listitem> + </itemizedlist> + <para> + Many new modules are now core modules, most notably + <literal>services.prosody.modules.carbons</literal> and + <literal>services.prosody.modules.mam</literal>. + </para> + <para> + The better-performing <literal>libevent</literal> backend is + now enabled by default. + </para> + <para> + <literal>withCommunityModules</literal> now passes through the + modules to <literal>services.prosody.extraModules</literal>. + Use <literal>withOnlyInstalledCommunityModules</literal> for + modules that should not be enabled directly, e.g + <literal>lib_ldap</literal>. + </para> + </listitem> + <listitem> + <para> + All prometheus exporter modules are now defined as submodules. + The exporters are configured using + <literal>services.prometheus.exporters</literal>. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-18.03-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + ZNC option <literal>services.znc.mutable</literal> now + defaults to <literal>true</literal>. That means that old + configuration is not overwritten by default when update to the + znc options are made. + </para> + </listitem> + <listitem> + <para> + The option + <literal>networking.wireless.networks.<name>.auth</literal> + has been added for wireless networks with WPA-Enterprise + authentication. There is also a new + <literal>extraConfig</literal> option to directly configure + <literal>wpa_supplicant</literal> and + <literal>hidden</literal> to connect to hidden networks. + </para> + </listitem> + <listitem> + <para> + In the module + <literal>networking.interfaces.<name></literal> the + following options have been removed: + </para> + <itemizedlist> + <listitem> + <para> + <literal>ipAddress</literal> + </para> + </listitem> + <listitem> + <para> + <literal>ipv6Address</literal> + </para> + </listitem> + <listitem> + <para> + <literal>prefixLength</literal> + </para> + </listitem> + <listitem> + <para> + <literal>ipv6PrefixLength</literal> + </para> + </listitem> + <listitem> + <para> + <literal>subnetMask</literal> + </para> + </listitem> + </itemizedlist> + <para> + To assign static addresses to an interface the options + <literal>ipv4.addresses</literal> and + <literal>ipv6.addresses</literal> should be used instead. The + options <literal>ip4</literal> and <literal>ip6</literal> have + been renamed to <literal>ipv4.addresses</literal> + <literal>ipv6.addresses</literal> respectively. The new + options <literal>ipv4.routes</literal> and + <literal>ipv6.routes</literal> have been added to set up + static routing. + </para> + </listitem> + <listitem> + <para> + The option <literal>services.logstash.listenAddress</literal> + is now <literal>127.0.0.1</literal> by default. Previously the + default behaviour was to listen on all interfaces. + </para> + </listitem> + <listitem> + <para> + <literal>services.btrfs.autoScrub</literal> has been added, to + periodically check btrfs filesystems for data corruption. If + there's a correct copy available, it will automatically repair + corrupted blocks. + </para> + </listitem> + <listitem> + <para> + <literal>displayManager.lightdm.greeters.gtk.clock-format.</literal> + has been added, the clock format string (as expected by + strftime, e.g. <literal>%H:%M</literal>) to use with the + lightdm gtk greeter panel. + </para> + <para> + If set to null the default clock format is used. + </para> + </listitem> + <listitem> + <para> + <literal>displayManager.lightdm.greeters.gtk.indicators</literal> + has been added, a list of allowed indicator modules to use + with the lightdm gtk greeter panel. + </para> + <para> + Built-in indicators include <literal>~a11y</literal>, + <literal>~language</literal>, <literal>~session</literal>, + <literal>~power</literal>, <literal>~clock</literal>, + <literal>~host</literal>, <literal>~spacer</literal>. Unity + indicators can be represented by short name (e.g. + <literal>sound</literal>, <literal>power</literal>), service + file name, or absolute path. + </para> + <para> + If set to <literal>null</literal> the default indicators are + used. + </para> + <para> + In order to have the previous default configuration add + </para> + <programlisting language="bash"> +{ + services.xserver.displayManager.lightdm.greeters.gtk.indicators = [ + "~host" "~spacer" + "~clock" "~spacer" + "~session" + "~language" + "~a11y" + "~power" + ]; +} +</programlisting> + <para> + to your <literal>configuration.nix</literal>. + </para> + </listitem> + <listitem> + <para> + The NixOS test driver supports user services declared by + <literal>systemd.user.services</literal>. The methods + <literal>waitForUnit</literal>, + <literal>getUnitInfo</literal>, <literal>startJob</literal> + and <literal>stopJob</literal> provide an optional + <literal>$user</literal> argument for that purpose. + </para> + </listitem> + <listitem> + <para> + Enabling bash completion on NixOS, + <literal>programs.bash.enableCompletion</literal>, will now + also enable completion for the Nix command line tools by + installing the + <link xlink:href="https://github.com/hedning/nix-bash-completions">nix-bash-completions</link> + package. + </para> + </listitem> + </itemizedlist> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1809.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1809.section.xml new file mode 100644 index 00000000000..aa4637a99b6 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1809.section.xml @@ -0,0 +1,941 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-18.09"> + <title>Release 18.09 (<quote>Jellyfish</quote>, 2018/10/05)</title> + <section xml:id="sec-release-18.09-highlights"> + <title>Highlights</title> + <para> + In addition to numerous new and upgraded packages, this release + has the following notable updates: + </para> + <itemizedlist> + <listitem> + <para> + End of support is planned for end of April 2019, handing over + to 19.03. + </para> + </listitem> + <listitem> + <para> + Platform support: x86_64-linux and x86_64-darwin as always. + Support for aarch64-linux is as with the previous releases, + not equivalent to the x86-64-linux release, but with efforts + to reach parity. + </para> + </listitem> + <listitem> + <para> + Nix has been updated to 2.1; see its + <link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-2.1">release + notes</link>. + </para> + </listitem> + <listitem> + <para> + Core versions: linux: 4.14 LTS (unchanged), glibc: 2.26 → + 2.27, gcc: 7 (unchanged), systemd: 237 → 239. + </para> + </listitem> + <listitem> + <para> + Desktop version changes: gnome: 3.26 → 3.28, (KDE) + plasma-desktop: 5.12 → 5.13. + </para> + </listitem> + </itemizedlist> + <para> + Notable changes and additions for 18.09 include: + </para> + <itemizedlist> + <listitem> + <para> + Support for wrapping binaries using + <literal>firejail</literal> has been added through + <literal>programs.firejail.wrappedBinaries</literal>. + </para> + <para> + For example + </para> + <programlisting language="bash"> +{ + programs.firejail = { + enable = true; + wrappedBinaries = { + firefox = "${lib.getBin pkgs.firefox}/bin/firefox"; + mpv = "${lib.getBin pkgs.mpv}/bin/mpv"; + }; + }; +} +</programlisting> + <para> + This will place <literal>firefox</literal> and + <literal>mpv</literal> binaries in the global path wrapped by + firejail. + </para> + </listitem> + <listitem> + <para> + User channels are now in the default + <literal>NIX_PATH</literal>, allowing users to use their + personal <literal>nix-channel</literal> defined channels in + <literal>nix-build</literal> and <literal>nix-shell</literal> + commands, as well as in imports like + <literal>import <mychannel></literal>. + </para> + <para> + For example + </para> + <programlisting> +$ nix-channel --add https://nixos.org/channels/nixpkgs-unstable nixpkgsunstable +$ nix-channel --update +$ nix-build '<nixpkgsunstable>' -A gitFull +$ nix run -f '<nixpkgsunstable>' gitFull +$ nix-instantiate -E '(import <nixpkgsunstable> {}).gitFull' +</programlisting> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-18.09-new-services"> + <title>New Services</title> + <para> + A curated selection of new services that were added since the last + release: + </para> + <itemizedlist> + <listitem> + <para> + The <literal>services.cassandra</literal> module has been + reworked and was rewritten from scratch. The service has + succeeding tests for the versions 2.1, 2.2, 3.0 and 3.11 of + <link xlink:href="https://cassandra.apache.org/">Apache + Cassandra</link>. + </para> + </listitem> + <listitem> + <para> + There is a new <literal>services.foundationdb</literal> module + for deploying + <link xlink:href="https://www.foundationdb.org">FoundationDB</link> + clusters. + </para> + </listitem> + <listitem> + <para> + When enabled the <literal>iproute2</literal> will copy the + files expected by ip route (e.g., + <literal>rt_tables</literal>) in + <literal>/etc/iproute2</literal>. This allows to write aliases + for routing tables for instance. + </para> + </listitem> + <listitem> + <para> + <literal>services.strongswan-swanctl</literal> is a modern + replacement for <literal>services.strongswan</literal>. You + can use either one of them to setup IPsec VPNs but not both at + the same time. + </para> + <para> + <literal>services.strongswan-swanctl</literal> uses the + <link xlink:href="https://wiki.strongswan.org/projects/strongswan/wiki/swanctl">swanctl</link> + command which uses the modern + <link xlink:href="https://github.com/strongswan/strongswan/blob/master/src/libcharon/plugins/vici/README.md">vici</link> + <emphasis>Versatile IKE Configuration Interface</emphasis>. + The deprecated <literal>ipsec</literal> command used in + <literal>services.strongswan</literal> is using the legacy + <link xlink:href="https://github.com/strongswan/strongswan/blob/master/README_LEGACY.md">stroke + configuration interface</link>. + </para> + </listitem> + <listitem> + <para> + The new <literal>services.elasticsearch-curator</literal> + service periodically curates or manages, your Elasticsearch + indices and snapshots. + </para> + </listitem> + </itemizedlist> + <para> + Every new services: + </para> + <itemizedlist> + <listitem> + <para> + <literal>./config/xdg/autostart.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./config/xdg/icons.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./config/xdg/menus.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./config/xdg/mime.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./hardware/brightnessctl.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./hardware/onlykey.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./hardware/video/uvcvideo/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./misc/documentation.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/firejail.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/iftop.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/sedutil.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/singularity.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/xss-lock.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/zsh/zsh-autosuggestions.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/admin/oxidized.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/duplicati.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/restic.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/restic-rest-server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/cluster/hadoop/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/databases/aerospike.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/databases/monetdb.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/bamf.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/flatpak.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/zeitgeist.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/development/bloop.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/development/jupyter/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/hardware/lcd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/hardware/undervolt.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/clipmenu.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/gitweb.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/serviio.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/safeeyes.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/sysprof.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/weechat.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/monitoring/datadog-agent.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/monitoring/incron.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/dnsdist.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/freeradius.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/hans.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/morty.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/ndppd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/ocserv.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/owamp.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/quagga.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/shadowsocks.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/stubby.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/zeronet.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/security/certmgr.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/security/cfssl.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/security/oauth2_proxy_nginx.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/virtlyst.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/youtrack.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-servers/hitch/default.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-servers/hydron.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-servers/meguca.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-servers/nginx/gitweb.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./virtualisation/kvmgt.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./virtualisation/qemu-guest-agent.nix</literal> + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-18.09-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + Some licenses that were incorrectly not marked as unfree now + are. This is the case for: + </para> + <itemizedlist> + <listitem> + <para> + cc-by-nc-sa-20: Creative Commons Attribution Non + Commercial Share Alike 2.0 + </para> + </listitem> + <listitem> + <para> + cc-by-nc-sa-25: Creative Commons Attribution Non + Commercial Share Alike 2.5 + </para> + </listitem> + <listitem> + <para> + cc-by-nc-sa-30: Creative Commons Attribution Non + Commercial Share Alike 3.0 + </para> + </listitem> + <listitem> + <para> + cc-by-nc-sa-40: Creative Commons Attribution Non + Commercial Share Alike 4.0 + </para> + </listitem> + <listitem> + <para> + cc-by-nd-30: Creative Commons Attribution-No Derivative + Works v3.00 + </para> + </listitem> + <listitem> + <para> + msrla: Microsoft Research License Agreement + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The deprecated <literal>services.cassandra</literal> module + has seen a complete rewrite. (See above.) + </para> + </listitem> + <listitem> + <para> + <literal>lib.strict</literal> is removed. Use + <literal>builtins.seq</literal> instead. + </para> + </listitem> + <listitem> + <para> + The <literal>clementine</literal> package points now to the + free derivation. <literal>clementineFree</literal> is removed + now and <literal>clementineUnfree</literal> points to the + package which is bundled with the unfree + <literal>libspotify</literal> package. + </para> + </listitem> + <listitem> + <para> + The <literal>netcat</literal> package is now taken directly + from OpenBSD's <literal>libressl</literal>, instead of relying + on Debian's fork. The new version should be very close to the + old version, but there are some minor differences. + Importantly, flags like -b, -q, -C, and -Z are no longer + accepted by the nc command. + </para> + </listitem> + <listitem> + <para> + The <literal>services.docker-registry.extraConfig</literal> + object doesn't contain environment variables anymore. Instead + it needs to provide an object structure that can be mapped + onto the YAML configuration defined in + <link xlink:href="https://github.com/docker/distribution/blob/v2.6.2/docs/configuration.md">the + <literal>docker/distribution</literal> docs</link>. + </para> + </listitem> + <listitem> + <para> + <literal>gnucash</literal> has changed from version 2.4 to + 3.x. If you've been using <literal>gnucash</literal> (version + 2.4) instead of <literal>gnucash26</literal> (version 2.6) you + must open your Gnucash data file(s) with + <literal>gnucash26</literal> and then save them to upgrade the + file format. Then you may use your data file(s) with Gnucash + 3.x. See the upgrade + <link xlink:href="https://wiki.gnucash.org/wiki/FAQ#Using_Different_Versions.2C_Up_And_Downgrade">documentation</link>. + Gnucash 2.4 is still available under the attribute + <literal>gnucash24</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>services.munge</literal> now runs as user (and group) + <literal>munge</literal> instead of root. Make sure the key + file is accessible to the daemon. + </para> + </listitem> + <listitem> + <para> + <literal>dockerTools.buildImage</literal> now uses + <literal>null</literal> as default value for + <literal>tag</literal>, which indicates that the nix output + hash will be used as tag. + </para> + </listitem> + <listitem> + <para> + The ELK stack: <literal>elasticsearch</literal>, + <literal>logstash</literal> and <literal>kibana</literal> has + been upgraded from 2.* to 6.3.*. The 2.* versions have been + <link xlink:href="https://www.elastic.co/support/eol">unsupported + since last year</link> so they have been removed. You can + still use the 5.* versions under the names + <literal>elasticsearch5</literal>, + <literal>logstash5</literal> and <literal>kibana5</literal>. + </para> + <para> + The elastic beats: <literal>filebeat</literal>, + <literal>heartbeat</literal>, <literal>metricbeat</literal> + and <literal>packetbeat</literal> have had the same treatment: + they now target 6.3.* as well. The 5.* versions are available + under the names: <literal>filebeat5</literal>, + <literal>heartbeat5</literal>, <literal>metricbeat5</literal> + and <literal>packetbeat5</literal> + </para> + <para> + The ELK-6.3 stack now comes with + <link xlink:href="https://www.elastic.co/products/x-pack/open">X-Pack + by default</link>. Since X-Pack is licensed under the + <link xlink:href="https://github.com/elastic/elasticsearch/blob/master/licenses/ELASTIC-LICENSE.txt">Elastic + License</link> the ELK packages now have an unfree license. To + use them you need to specify + <literal>allowUnfree = true;</literal> in your nixpkgs + configuration. + </para> + <para> + Fortunately there is also a free variant of the ELK stack + without X-Pack. The packages are available under the names: + <literal>elasticsearch-oss</literal>, + <literal>logstash-oss</literal> and + <literal>kibana-oss</literal>. + </para> + </listitem> + <listitem> + <para> + Options + <literal>boot.initrd.luks.devices.name.yubikey.ramfsMountPoint</literal> + <literal>boot.initrd.luks.devices.name.yubikey.storage.mountPoint</literal> + were removed. <literal>luksroot.nix</literal> module never + supported more than one YubiKey at a time anyway, hence those + options never had any effect. You should be able to remove + them from your config without any issues. + </para> + </listitem> + <listitem> + <para> + <literal>stdenv.system</literal> and <literal>system</literal> + in nixpkgs now refer to the host platform instead of the build + platform. For native builds this is not change, let alone a + breaking one. For cross builds, it is a breaking change, and + <literal>stdenv.buildPlatform.system</literal> can be used + instead for the old behavior. They should be using that + anyways for clarity. + </para> + </listitem> + <listitem> + <para> + Groups <literal>kvm</literal> and <literal>render</literal> + are introduced now, as systemd requires them. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-18.09-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + <literal>dockerTools.pullImage</literal> relies on image + digest instead of image tag to download the image. The + <literal>sha256</literal> of a pulled image has to be updated. + </para> + </listitem> + <listitem> + <para> + <literal>lib.attrNamesToStr</literal> has been deprecated. Use + more specific concatenation + (<literal>lib.concat(Map)StringsSep</literal>) instead. + </para> + </listitem> + <listitem> + <para> + <literal>lib.addErrorContextToAttrs</literal> has been + deprecated. Use <literal>builtins.addErrorContext</literal> + directly. + </para> + </listitem> + <listitem> + <para> + <literal>lib.showVal</literal> has been deprecated. Use + <literal>lib.traceSeqN</literal> instead. + </para> + </listitem> + <listitem> + <para> + <literal>lib.traceXMLVal</literal> has been deprecated. Use + <literal>lib.traceValFn builtins.toXml</literal> instead. + </para> + </listitem> + <listitem> + <para> + <literal>lib.traceXMLValMarked</literal> has been deprecated. + Use + <literal>lib.traceValFn (x: str + builtins.toXML x)</literal> + instead. + </para> + </listitem> + <listitem> + <para> + The <literal>pkgs</literal> argument to NixOS modules can now + be set directly using <literal>nixpkgs.pkgs</literal>. + Previously, only the <literal>system</literal>, + <literal>config</literal> and <literal>overlays</literal> + arguments could be used to influence <literal>pkgs</literal>. + </para> + </listitem> + <listitem> + <para> + A NixOS system can now be constructed more easily based on a + preexisting invocation of Nixpkgs. For example: + </para> + <programlisting language="bash"> +{ + inherit (pkgs.nixos { + boot.loader.grub.enable = false; + fileSystems."/".device = "/dev/xvda1"; + }) toplevel kernel initialRamdisk manual; +} +</programlisting> + <para> + This benefits evaluation performance, lets you write Nixpkgs + packages that depend on NixOS images and is consistent with a + deployment architecture that would be centered around Nixpkgs + overlays. + </para> + </listitem> + <listitem> + <para> + <literal>lib.traceValIfNot</literal> has been deprecated. Use + <literal>if/then/else</literal> and + <literal>lib.traceValSeq</literal> instead. + </para> + </listitem> + <listitem> + <para> + <literal>lib.traceCallXml</literal> has been deprecated. + Please complain if you use the function regularly. + </para> + </listitem> + <listitem> + <para> + The attribute <literal>lib.nixpkgsVersion</literal> has been + deprecated in favor of <literal>lib.version</literal>. Please + refer to the discussion in + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/39416#discussion_r183845745">NixOS/nixpkgs#39416</link> + for further reference. + </para> + </listitem> + <listitem> + <para> + <literal>lib.recursiveUpdateUntil</literal> was not acting + according to its specification. It has been fixed to act + according to the docstring, and a test has been added. + </para> + </listitem> + <listitem> + <para> + The module for <literal>security.dhparams</literal> has two + new options now: + </para> + <variablelist> + <varlistentry> + <term> + <literal>security.dhparams.stateless</literal> + </term> + <listitem> + <para> + Puts the generated Diffie-Hellman parameters into the + Nix store instead of managing them in a stateful manner + in <literal>/var/lib/dhparams</literal>. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <literal>security.dhparams.defaultBitSize</literal> + </term> + <listitem> + <para> + The default bit size to use for the generated + Diffie-Hellman parameters. + </para> + </listitem> + </varlistentry> + </variablelist> + <note> + <para> + The path to the actual generated parameter files should now + be queried using + <literal>config.security.dhparams.params.name.path</literal> + because it might be either in the Nix store or in a + directory configured by + <literal>security.dhparams.path</literal>. + </para> + </note> + <note> + <para> + <emphasis role="strong">For developers:</emphasis> + </para> + <para> + Module implementers should not set a specific bit size in + order to let users configure it by themselves if they want + to have a different bit size than the default (2048). + </para> + <para> + An example usage of this would be: + </para> + <programlisting language="bash"> +{ config, ... }: + +{ + security.dhparams.params.myservice = {}; + environment.etc."myservice.conf".text = '' + dhparams = ${config.security.dhparams.params.myservice.path} + ''; +} +</programlisting> + </note> + </listitem> + <listitem> + <para> + <literal>networking.networkmanager.useDnsmasq</literal> has + been deprecated. Use + <literal>networking.networkmanager.dns</literal> instead. + </para> + </listitem> + <listitem> + <para> + The Kubernetes package has been bumped to major version 1.11. + Please consult the + <link xlink:href="https://github.com/kubernetes/kubernetes/blob/release-1.11/CHANGELOG-1.11.md">release + notes</link> for details on new features and api changes. + </para> + </listitem> + <listitem> + <para> + The option + <literal>services.kubernetes.apiserver.admissionControl</literal> + was renamed to + <literal>services.kubernetes.apiserver.enableAdmissionPlugins</literal>. + </para> + </listitem> + <listitem> + <para> + Recommended way to access the Kubernetes Dashboard is via + HTTPS (TLS) Therefore; public service port for the dashboard + has changed to 443 (container port 8443) and scheme to https. + </para> + </listitem> + <listitem> + <para> + The option + <literal>services.kubernetes.apiserver.address</literal> was + renamed to + <literal>services.kubernetes.apiserver.bindAddress</literal>. + Note that the default value has changed from 127.0.0.1 to + 0.0.0.0. + </para> + </listitem> + <listitem> + <para> + The option + <literal>services.kubernetes.apiserver.publicAddress</literal> + was not used and thus has been removed. + </para> + </listitem> + <listitem> + <para> + The option + <literal>services.kubernetes.addons.dashboard.enableRBAC</literal> + was renamed to + <literal>services.kubernetes.addons.dashboard.rbac.enable</literal>. + </para> + </listitem> + <listitem> + <para> + The Kubernetes Dashboard now has only minimal RBAC permissions + by default. If dashboard cluster-admin rights are desired, set + <literal>services.kubernetes.addons.dashboard.rbac.clusterAdmin</literal> + to true. On existing clusters, in order for the revocation of + privileges to take effect, the current ClusterRoleBinding for + kubernetes-dashboard must be manually removed: + <literal>kubectl delete clusterrolebinding kubernetes-dashboard</literal> + </para> + </listitem> + <listitem> + <para> + The <literal>programs.screen</literal> module provides allows + to configure <literal>/etc/screenrc</literal>, however the + module behaved fairly counterintuitive as the config exists, + but the package wasn't available. Since 18.09 + <literal>pkgs.screen</literal> will be added to + <literal>environment.systemPackages</literal>. + </para> + </listitem> + <listitem> + <para> + The module <literal>services.networking.hostapd</literal> now + uses WPA2 by default. + </para> + </listitem> + <listitem> + <para> + <literal>s6Dns</literal>, <literal>s6Networking</literal>, + <literal>s6LinuxUtils</literal> and + <literal>s6PortableUtils</literal> renamed to + <literal>s6-dns</literal>, <literal>s6-networking</literal>, + <literal>s6-linux-utils</literal> and + <literal>s6-portable-utils</literal> respectively. + </para> + </listitem> + <listitem> + <para> + The module option <literal>nix.useSandbox</literal> is now + defaulted to <literal>true</literal>. + </para> + </listitem> + <listitem> + <para> + The config activation script of + <literal>nixos-rebuild</literal> now + <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemctl.html#Manager%20Lifecycle%20Commands">reloads</link> + all user units for each authenticated user. + </para> + </listitem> + <listitem> + <para> + The default display manager is now LightDM. To use SLiM set + <literal>services.xserver.displayManager.slim.enable</literal> + to <literal>true</literal>. + </para> + </listitem> + <listitem> + <para> + NixOS option descriptions are now automatically broken up into + individual paragraphs if the text contains two consecutive + newlines, so it's no longer necessary to use + <literal></para><para></literal> to start a new + paragraph. + </para> + </listitem> + <listitem> + <para> + Top-level <literal>buildPlatform</literal>, + <literal>hostPlatform</literal>, and + <literal>targetPlatform</literal> in Nixpkgs are deprecated. + Please use their equivalents in <literal>stdenv</literal> + instead: <literal>stdenv.buildPlatform</literal>, + <literal>stdenv.hostPlatform</literal>, and + <literal>stdenv.targetPlatform</literal>. + </para> + </listitem> + </itemizedlist> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1903.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1903.section.xml new file mode 100644 index 00000000000..f26e68e1320 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1903.section.xml @@ -0,0 +1,790 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-19.03"> + <title>Release 19.03 (<quote>Koi</quote>, 2019/04/11)</title> + <section xml:id="sec-release-19.03-highlights"> + <title>Highlights</title> + <para> + In addition to numerous new and upgraded packages, this release + has the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + End of support is planned for end of October 2019, handing + over to 19.09. + </para> + </listitem> + <listitem> + <para> + The default Python 3 interpreter is now CPython 3.7 instead of + CPython 3.6. + </para> + </listitem> + <listitem> + <para> + Added the Pantheon desktop environment. It can be enabled + through + <literal>services.xserver.desktopManager.pantheon.enable</literal>. + </para> + <note> + <para> + By default, + <literal>services.xserver.desktopManager.pantheon</literal> + enables LightDM as a display manager, as pantheon's screen + locking implementation relies on it. Because of that it is + recommended to leave LightDM enabled. If you'd like to + disable it anyway, set + <literal>services.xserver.displayManager.lightdm.enable</literal> + to <literal>false</literal> and enable your preferred + display manager. + </para> + </note> + <para> + Also note that Pantheon's LightDM greeter is not enabled by + default, because it has numerous issues in NixOS and isn't + optimal for use here yet. + </para> + </listitem> + <listitem> + <para> + A major refactoring of the Kubernetes module has been + completed. Refactorings primarily focus on decoupling + components and enhancing security. Two-way TLS and RBAC has + been enabled by default for all components, which slightly + changes the way the module is configured. See: + <xref linkend="sec-kubernetes" /> for details. + </para> + </listitem> + <listitem> + <para> + There is now a set of <literal>confinement</literal> options + for <literal>systemd.services</literal>, which allows to + restrict services into a chroot 2 ed environment that only + contains the store paths from the runtime closure of the + service. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-19.03-new-services"> + <title>New Services</title> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>./programs/nm-applet.nix</literal> + </para> + </listitem> + <listitem> + <para> + There is a new <literal>security.googleOsLogin</literal> + module for using + <link xlink:href="https://cloud.google.com/compute/docs/instances/managing-instance-access">OS + Login</link> to manage SSH access to Google Compute Engine + instances, which supersedes the imperative and broken + <literal>google-accounts-daemon</literal> used in + <literal>nixos/modules/virtualisation/google-compute-config.nix</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/beanstalkd.nix</literal> + </para> + </listitem> + <listitem> + <para> + There is a new <literal>services.cockroachdb</literal> module + for running CockroachDB databases. NixOS now ships with + CockroachDB 2.1.x as well, available on + <literal>x86_64-linux</literal> and + <literal>aarch64-linux</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>./security/duosec.nix</literal> + </para> + </listitem> + <listitem> + <para> + The <link xlink:href="https://duo.com/docs/duounix">PAM module + for Duo Security</link> has been enabled for use. One can + configure it using the <literal>security.duosec</literal> + options along with the corresponding PAM option in + <literal>security.pam.services.<name?>.duoSecurity.enable</literal>. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-19.03-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + The minimum version of Nix required to evaluate Nixpkgs is now + 2.0. + </para> + <itemizedlist> + <listitem> + <para> + For users of NixOS 18.03 and 19.03, NixOS defaults to Nix + 2.0, but supports using Nix 1.11 by setting + <literal>nix.package = pkgs.nix1;</literal>. If this + option is set to a Nix 1.11 package, you will need to + either unset the option or upgrade it to Nix 2.0. + </para> + </listitem> + <listitem> + <para> + For users of NixOS 17.09, you will first need to upgrade + Nix by setting + <literal>nix.package = pkgs.nixStable2;</literal> and run + <literal>nixos-rebuild switch</literal> as the + <literal>root</literal> user. + </para> + </listitem> + <listitem> + <para> + For users of a daemon-less Nix installation on Linux or + macOS, you can upgrade Nix by running + <literal>curl -L https://nixos.org/nix/install | sh</literal>, + or prior to doing a channel update, running + <literal>nix-env -iA nix</literal>. If you have already + run a channel update and Nix is no longer able to evaluate + Nixpkgs, the error message printed should provide adequate + directions for upgrading Nix. + </para> + </listitem> + <listitem> + <para> + For users of the Nix daemon on macOS, you can upgrade Nix + by running + <literal>sudo -i sh -c 'nix-channel --update && nix-env -iA nixpkgs.nix'; sudo launchctl stop org.nixos.nix-daemon; sudo launchctl start org.nixos.nix-daemon</literal>. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The <literal>buildPythonPackage</literal> function now sets + <literal>strictDeps = true</literal> to help distinguish + between native and non-native dependencies in order to improve + cross-compilation compatibility. Note however that this may + break user expressions. + </para> + </listitem> + <listitem> + <para> + The <literal>buildPythonPackage</literal> function now sets + <literal>LANG = C.UTF-8</literal> to enable Unicode support. + The <literal>glibcLocales</literal> package is no longer + needed as a build input. + </para> + </listitem> + <listitem> + <para> + The Syncthing state and configuration data has been moved from + <literal>services.syncthing.dataDir</literal> to the newly + defined <literal>services.syncthing.configDir</literal>, which + default to + <literal>/var/lib/syncthing/.config/syncthing</literal>. This + change makes possible to share synced directories using ACLs + without Syncthing resetting the permission on every start. + </para> + </listitem> + <listitem> + <para> + The <literal>ntp</literal> module now has sane default + restrictions. If you're relying on the previous defaults, + which permitted all queries and commands from all + firewall-permitted sources, you can set + <literal>services.ntp.restrictDefault</literal> and + <literal>services.ntp.restrictSource</literal> to + <literal>[]</literal>. + </para> + </listitem> + <listitem> + <para> + Package <literal>rabbitmq_server</literal> is renamed to + <literal>rabbitmq-server</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>light</literal> module no longer uses setuid + binaries, but udev rules. As a consequence users of that + module have to belong to the <literal>video</literal> group in + order to use the executable (i.e. + <literal>users.users.yourusername.extraGroups = ["video"];</literal>). + </para> + </listitem> + <listitem> + <para> + Buildbot now supports Python 3 and its packages have been + moved to <literal>pythonPackages</literal>. The options + <literal>services.buildbot-master.package</literal> and + <literal>services.buildbot-worker.package</literal> can be + used to select the Python 2 or 3 version of the package. + </para> + </listitem> + <listitem> + <para> + Options + <literal>services.znc.confOptions.networks.name.userName</literal> + and + <literal>services.znc.confOptions.networks.name.modulePackages</literal> + were removed. They were never used for anything and can + therefore safely be removed. + </para> + </listitem> + <listitem> + <para> + Package <literal>wasm</literal> has been renamed + <literal>proglodyte-wasm</literal>. The package + <literal>wasm</literal> will be pointed to + <literal>ocamlPackages.wasm</literal> in 19.09, so make sure + to update your configuration if you want to keep + <literal>proglodyte-wasm</literal> + </para> + </listitem> + <listitem> + <para> + When the <literal>nixpkgs.pkgs</literal> option is set, NixOS + will no longer ignore the <literal>nixpkgs.overlays</literal> + option. The old behavior can be recovered by setting + <literal>nixpkgs.overlays = lib.mkForce [];</literal>. + </para> + </listitem> + <listitem> + <para> + OpenSMTPD has been upgraded to version 6.4.0p1. This release + makes backwards-incompatible changes to the configuration file + format. See <literal>man smtpd.conf</literal> for more + information on the new file format. + </para> + </listitem> + <listitem> + <para> + The versioned <literal>postgresql</literal> have been renamed + to use underscore number seperators. For example, + <literal>postgresql96</literal> has been renamed to + <literal>postgresql_9_6</literal>. + </para> + </listitem> + <listitem> + <para> + Package <literal>consul-ui</literal> and passthrough + <literal>consul.ui</literal> have been removed. The package + <literal>consul</literal> now uses upstream releases that + vendor the UI into the binary. See + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/48714#issuecomment-433454834">#48714</link> + for details. + </para> + </listitem> + <listitem> + <para> + Slurm introduces the new option + <literal>services.slurm.stateSaveLocation</literal>, which is + now set to <literal>/var/spool/slurm</literal> by default + (instead of <literal>/var/spool</literal>). Make sure to move + all files to the new directory or to set the option + accordingly. + </para> + <para> + The slurmctld now runs as user <literal>slurm</literal> + instead of <literal>root</literal>. If you want to keep + slurmctld running as <literal>root</literal>, set + <literal>services.slurm.user = root</literal>. + </para> + <para> + The options <literal>services.slurm.nodeName</literal> and + <literal>services.slurm.partitionName</literal> are now sets + of strings to correctly reflect that fact that each of these + options can occour more than once in the configuration. + </para> + </listitem> + <listitem> + <para> + The <literal>solr</literal> package has been upgraded from + 4.10.3 to 7.5.0 and has undergone some major changes. The + <literal>services.solr</literal> module has been updated to + reflect these changes. Please review + http://lucene.apache.org/solr/ carefully before upgrading. + </para> + </listitem> + <listitem> + <para> + Package <literal>ckb</literal> is renamed to + <literal>ckb-next</literal>, and options + <literal>hardware.ckb.*</literal> are renamed to + <literal>hardware.ckb-next.*</literal>. + </para> + </listitem> + <listitem> + <para> + The option + <literal>services.xserver.displayManager.job.logToFile</literal> + which was previously set to <literal>true</literal> when using + the display managers <literal>lightdm</literal>, + <literal>sddm</literal> or <literal>xpra</literal> has been + reset to the default value (<literal>false</literal>). + </para> + </listitem> + <listitem> + <para> + Network interface indiscriminate NixOS firewall options + (<literal>networking.firewall.allow*</literal>) are now + preserved when also setting interface specific rules such as + <literal>networking.firewall.interfaces.en0.allow*</literal>. + These rules continue to use the pseudo device + "default" + (<literal>networking.firewall.interfaces.default.*</literal>), + and assigning to this pseudo device will override the + (<literal>networking.firewall.allow*</literal>) options. + </para> + </listitem> + <listitem> + <para> + The <literal>nscd</literal> service now disables all caching + of <literal>passwd</literal> and <literal>group</literal> + databases by default. This was interferring with the correct + functioning of the <literal>libnss_systemd.so</literal> module + which is used by <literal>systemd</literal> to manage uids and + usernames in the presence of <literal>DynamicUser=</literal> + in systemd services. This was already the default behaviour in + presence of <literal>services.sssd.enable = true</literal> + because nscd caching would interfere with + <literal>sssd</literal> in unpredictable ways as well. Because + we're using nscd not for caching, but for convincing glibc to + find NSS modules in the nix store instead of an absolute path, + we have decided to disable caching globally now, as it's + usually not the behaviour the user wants and can lead to + surprising behaviour. Furthermore, negative caching of host + lookups is also disabled now by default. This should fix the + issue of dns lookups failing in the presence of an unreliable + network. + </para> + <para> + If the old behaviour is desired, this can be restored by + setting the <literal>services.nscd.config</literal> option + with the desired caching parameters. + </para> + <programlisting language="bash"> +{ + services.nscd.config = + '' + server-user nscd + threads 1 + paranoia no + debug-level 0 + + enable-cache passwd yes + positive-time-to-live passwd 600 + negative-time-to-live passwd 20 + suggested-size passwd 211 + check-files passwd yes + persistent passwd no + shared passwd yes + + enable-cache group yes + positive-time-to-live group 3600 + negative-time-to-live group 60 + suggested-size group 211 + check-files group yes + persistent group no + shared group yes + + enable-cache hosts yes + positive-time-to-live hosts 600 + negative-time-to-live hosts 5 + suggested-size hosts 211 + check-files hosts yes + persistent hosts no + shared hosts yes + ''; +} +</programlisting> + <para> + See + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/50316">#50316</link> + for details. + </para> + </listitem> + <listitem> + <para> + GitLab Shell previously used the nix store paths for the + <literal>gitlab-shell</literal> command in its + <literal>authorized_keys</literal> file, which might stop + working after garbage collection. To circumvent that, we + regenerated that file on each startup. As + <literal>gitlab-shell</literal> has now been changed to use + <literal>/var/run/current-system/sw/bin/gitlab-shell</literal>, + this is not necessary anymore, but there might be leftover + lines with a nix store path. Regenerate the + <literal>authorized_keys</literal> file via + <literal>sudo -u git -H gitlab-rake gitlab:shell:setup</literal> + in that case. + </para> + </listitem> + <listitem> + <para> + The <literal>pam_unix</literal> account module is now loaded + with its control field set to <literal>required</literal> + instead of <literal>sufficient</literal>, so that later PAM + account modules that might do more extensive checks are being + executed. Previously, the whole account module verification + was exited prematurely in case a nss module provided the + account name to <literal>pam_unix</literal>. The LDAP and SSSD + NixOS modules already add their NSS modules when enabled. In + case your setup breaks due to some later PAM account module + previosuly shadowed, or failing NSS lookups, please file a + bug. You can get back the old behaviour by manually setting + <literal>security.pam.services.<name?>.text</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>pam_unix</literal> password module is now loaded + with its control field set to <literal>sufficient</literal> + instead of <literal>required</literal>, so that password + managed only by later PAM password modules are being executed. + Previously, for example, changing an LDAP account's password + through PAM was not possible: the whole password module + verification was exited prematurely by + <literal>pam_unix</literal>, preventing + <literal>pam_ldap</literal> to manage the password as it + should. + </para> + </listitem> + <listitem> + <para> + <literal>fish</literal> has been upgraded to 3.0. It comes + with a number of improvements and backwards incompatible + changes. See the <literal>fish</literal> + <link xlink:href="https://github.com/fish-shell/fish-shell/releases/tag/3.0.0">release + notes</link> for more information. + </para> + </listitem> + <listitem> + <para> + The ibus-table input method has had a change in config format, + which causes all previous settings to be lost. See + <link xlink:href="https://github.com/mike-fabian/ibus-table/commit/f9195f877c5212fef0dfa446acb328c45ba5852b">this + commit message</link> for details. + </para> + </listitem> + <listitem> + <para> + NixOS module system type <literal>types.optionSet</literal> + and <literal>lib.mkOption</literal> argument + <literal>options</literal> are deprecated. Use + <literal>types.submodule</literal> instead. + (<link xlink:href="https://github.com/NixOS/nixpkgs/pull/54637">#54637</link>) + </para> + </listitem> + <listitem> + <para> + <literal>matrix-synapse</literal> has been updated to version + 0.99. It will + <link xlink:href="https://github.com/matrix-org/synapse/pull/4509">no + longer generate a self-signed certificate on first + launch</link> and will be + <link xlink:href="https://matrix.org/blog/2019/02/05/synapse-0-99-0/">the + last version to accept self-signed certificates</link>. As + such, it is now recommended to use a proper certificate + verified by a root CA (for example Let's Encrypt). The new + <link linkend="module-services-matrix">manual chapter on + Matrix</link> contains a working example of using nginx as a + reverse proxy in front of <literal>matrix-synapse</literal>, + using Let's Encrypt certificates. + </para> + </listitem> + <listitem> + <para> + <literal>mailutils</literal> now works by default when + <literal>sendmail</literal> is not in a setuid wrapper. As a + consequence, the <literal>sendmailPath</literal> argument, + having lost its main use, has been removed. + </para> + </listitem> + <listitem> + <para> + <literal>graylog</literal> has been upgraded from version 2.* + to 3.*. Some setups making use of extraConfig (especially + those exposing Graylog via reverse proxies) need to be updated + as upstream removed/replaced some settings. See + <link xlink:href="http://docs.graylog.org/en/3.0/pages/upgrade/graylog-3.0.html#simplified-http-interface-configuration">Upgrading + Graylog</link> for details. + </para> + </listitem> + <listitem> + <para> + The option <literal>users.ldap.bind.password</literal> was + renamed to <literal>users.ldap.bind.passwordFile</literal>, + and needs to be readable by the <literal>nslcd</literal> user. + Same applies to the new + <literal>users.ldap.daemon.rootpwmodpwFile</literal> option. + </para> + </listitem> + <listitem> + <para> + <literal>nodejs-6_x</literal> is end-of-life. + <literal>nodejs-6_x</literal>, + <literal>nodejs-slim-6_x</literal> and + <literal>nodePackages_6_x</literal> are removed. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-19.03-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + The <literal>services.matomo</literal> module gained the + option <literal>services.matomo.package</literal> which + determines the used Matomo version. + </para> + <para> + The Matomo module now also comes with the systemd service + <literal>matomo-archive-processing.service</literal> and a + timer that automatically triggers archive processing every + hour. This means that you can safely + <link xlink:href="https://matomo.org/docs/setup-auto-archiving/#disable-browser-triggers-for-matomo-archiving-and-limit-matomo-reports-to-updating-every-hour"> + disable browser triggers for Matomo archiving </link> at + <literal>Administration > System > General Settings</literal>. + </para> + <para> + Additionally, you can enable to + <link xlink:href="https://matomo.org/docs/privacy/#step-2-delete-old-visitors-logs"> + delete old visitor logs </link> at + <literal>Administration > System > Privacy</literal>, + but make sure that you run + <literal>systemctl start matomo-archive-processing.service</literal> + at least once without errors if you have already collected + data before, so that the reports get archived before the + source data gets deleted. + </para> + </listitem> + <listitem> + <para> + <literal>composableDerivation</literal> along with supporting + library functions has been removed. + </para> + </listitem> + <listitem> + <para> + The deprecated <literal>truecrypt</literal> package has been + removed and <literal>truecrypt</literal> attribute is now an + alias for <literal>veracrypt</literal>. VeraCrypt is + backward-compatible with TrueCrypt volumes. Note that + <literal>cryptsetup</literal> also supports loading TrueCrypt + volumes. + </para> + </listitem> + <listitem> + <para> + The Kubernetes DNS addons, kube-dns, has been replaced with + CoreDNS. This change is made in accordance with Kubernetes + making CoreDNS the official default starting from + <link xlink:href="https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.11.md#sig-cluster-lifecycle">Kubernetes + v1.11</link>. Please beware that upgrading DNS-addon on + existing clusters might induce minor downtime while the + DNS-addon terminates and re-initializes. Also note that the + DNS-service now runs with 2 pod replicas by default. The + desired number of replicas can be configured using: + <literal>services.kubernetes.addons.dns.replicas</literal>. + </para> + </listitem> + <listitem> + <para> + The quassel-webserver package and module was removed from + nixpkgs due to the lack of maintainers. + </para> + </listitem> + <listitem> + <para> + The manual gained a <link linkend="module-services-matrix"> + new chapter on self-hosting <literal>matrix-synapse</literal> + and <literal>riot-web</literal> </link>, the most prevalent + server and client implementations for the + <link xlink:href="https://matrix.org/">Matrix</link> federated + communication network. + </para> + </listitem> + <listitem> + <para> + The astah-community package was removed from nixpkgs due to it + being discontinued and the downloads not being available + anymore. + </para> + </listitem> + <listitem> + <para> + The httpd service now saves log files with a .log file + extension by default for easier integration with the logrotate + service. + </para> + </listitem> + <listitem> + <para> + The owncloud server packages and httpd subservice module were + removed from nixpkgs due to the lack of maintainers. + </para> + </listitem> + <listitem> + <para> + It is possible now to uze ZRAM devices as general purpose + ephemeral block devices, not only as swap. Using more than 1 + device as ZRAM swap is no longer recommended, but is still + possible by setting <literal>zramSwap.swapDevices</literal> + explicitly. + </para> + <para> + ZRAM algorithm can be changed now. + </para> + <para> + Changes to ZRAM algorithm are applied during + <literal>nixos-rebuild switch</literal>, so make sure you have + enough swap space on disk to survive ZRAM device rebuild. + Alternatively, use + <literal>nixos-rebuild boot; reboot</literal>. + </para> + </listitem> + <listitem> + <para> + Flat volumes are now disabled by default in + <literal>hardware.pulseaudio</literal>. This has been done to + prevent applications, which are unaware of this feature, + setting their volumes to 100% on startup causing harm to your + audio hardware and potentially your ears. + </para> + <note> + <para> + With this change application specific volumes are relative + to the master volume which can be adjusted independently, + whereas before they were absolute; meaning that in effect, + it scaled the device-volume with the volume of the loudest + application. + </para> + </note> + </listitem> + <listitem> + <para> + The + <link xlink:href="https://github.com/DanielAdolfsson/ndppd"><literal>ndppd</literal></link> + module now supports + <link xlink:href="options.html#opt-services.ndppd.enable">all + config options</link> provided by the current upstream version + as service options. Additionally the <literal>ndppd</literal> + package doesn't contain the systemd unit configuration from + upstream anymore, the unit is completely configured by the + NixOS module now. + </para> + </listitem> + <listitem> + <para> + New installs of NixOS will default to the Redmine 4.x series + unless otherwise specified in + <literal>services.redmine.package</literal> while existing + installs of NixOS will default to the Redmine 3.x series. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.grafana.enable">Grafana + module</link> now supports declarative + <link xlink:href="http://docs.grafana.org/administration/provisioning/">datasource + and dashboard</link> provisioning. + </para> + </listitem> + <listitem> + <para> + The use of insecure ports on kubernetes has been deprecated. + Thus options: + <literal>services.kubernetes.apiserver.port</literal> and + <literal>services.kubernetes.controllerManager.port</literal> + has been renamed to <literal>.insecurePort</literal>, and + default of both options has changed to 0 (disabled). + </para> + </listitem> + <listitem> + <para> + Note that the default value of + <literal>services.kubernetes.apiserver.bindAddress</literal> + has changed from 127.0.0.1 to 0.0.0.0, allowing the apiserver + to be accessible from outside the master node itself. If the + apiserver insecurePort is enabled, it is strongly recommended + to only bind on the loopback interface. See: + <literal>services.kubernetes.apiserver.insecurebindAddress</literal>. + </para> + </listitem> + <listitem> + <para> + The option + <literal>services.kubernetes.apiserver.allowPrivileged</literal> + and + <literal>services.kubernetes.kubelet.allowPrivileged</literal> + now defaults to false. Disallowing privileged containers on + the cluster. + </para> + </listitem> + <listitem> + <para> + The kubernetes module does no longer add the kubernetes + package to <literal>environment.systemPackages</literal> + implicitly. + </para> + </listitem> + <listitem> + <para> + The <literal>intel</literal> driver has been removed from the + default list of + <link xlink:href="options.html#opt-services.xserver.videoDrivers">X.org + video drivers</link>. The <literal>modesetting</literal> + driver should take over automatically, it is better maintained + upstream and has less problems with advanced X11 features. + This can lead to a change in the output names used by + <literal>xrandr</literal>. Some performance regressions on + some GPU models might happen. Some OpenCL and VA-API + applications might also break (Beignet seems to provide OpenCL + support with <literal>modesetting</literal> driver, too). + Kernel mode setting API does not support backlight control, so + <literal>xbacklight</literal> tool will not work; backlight + level can be controlled directly via <literal>/sys/</literal> + or with <literal>brightnessctl</literal>. Users who need this + functionality more than multi-output XRandR are advised to add + `intel` to `videoDrivers` and report an issue (or provide + additional details in an existing one) + </para> + </listitem> + <listitem> + <para> + Openmpi has been updated to version 4.0.0, which removes some + deprecated MPI-1 symbols. This may break some older + applications that still rely on those symbols. An upgrade + guide can be found + <link xlink:href="https://www.open-mpi.org/faq/?category=mpi-removed">here</link>. + </para> + <para> + The nginx package now relies on OpenSSL 1.1 and supports TLS + 1.3 by default. You can set the protocols used by the nginx + service using + <link xlink:href="options.html#opt-services.nginx.sslProtocols">services.nginx.sslProtocols</link>. + </para> + </listitem> + <listitem> + <para> + A new subcommand <literal>nixos-rebuild edit</literal> was + added. + </para> + </listitem> + </itemizedlist> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-1909.section.xml b/nixos/doc/manual/from_md/release-notes/rl-1909.section.xml new file mode 100644 index 00000000000..83cd649f4ea --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-1909.section.xml @@ -0,0 +1,1197 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-19.09"> + <title>Release 19.09 (<quote>Loris</quote>, 2019/10/09)</title> + <section xml:id="sec-release-19.09-highlights"> + <title>Highlights</title> + <para> + In addition to numerous new and upgraded packages, this release + has the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + End of support is planned for end of April 2020, handing over + to 20.03. + </para> + </listitem> + <listitem> + <para> + Nix has been updated to 2.3; see its + <link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-2.3">release + notes</link>. + </para> + </listitem> + <listitem> + <para> + Core version changes: + </para> + <para> + systemd: 239 -> 243 + </para> + <para> + gcc: 7 -> 8 + </para> + <para> + glibc: 2.27 (unchanged) + </para> + <para> + linux: 4.19 LTS (unchanged) + </para> + <para> + openssl: 1.0 -> 1.1 + </para> + </listitem> + <listitem> + <para> + Desktop version changes: + </para> + <para> + plasma5: 5.14 -> 5.16 + </para> + <para> + gnome3: 3.30 -> 3.32 + </para> + </listitem> + <listitem> + <para> + PHP now defaults to PHP 7.3, updated from 7.2. + </para> + </listitem> + <listitem> + <para> + PHP 7.1 is no longer supported due to upstream not supporting + this version for the entire lifecycle of the 19.09 release. + </para> + </listitem> + <listitem> + <para> + The binfmt module is now easier to use. Additional systems can + be added through + <literal>boot.binfmt.emulatedSystems</literal>. For instance, + <literal>boot.binfmt.emulatedSystems = [ "wasm32-wasi" "x86_64-windows" "aarch64-linux" ];</literal> + will set up binfmt interpreters for each of those listed + systems. + </para> + </listitem> + <listitem> + <para> + The installer now uses a less privileged + <literal>nixos</literal> user whereas before we logged in as + root. To gain root privileges use <literal>sudo -i</literal> + without a password. + </para> + </listitem> + <listitem> + <para> + We've updated to Xfce 4.14, which brings a new module + <literal>services.xserver.desktopManager.xfce4-14</literal>. + If you'd like to upgrade, please switch from the + <literal>services.xserver.desktopManager.xfce</literal> module + as it will be deprecated in a future release. They're + incompatibilities with the current Xfce module; it doesn't + support <literal>thunarPlugins</literal> and it isn't + recommended to use + <literal>services.xserver.desktopManager.xfce</literal> and + <literal>services.xserver.desktopManager.xfce4-14</literal> + simultaneously or to downgrade from Xfce 4.14 after upgrading. + </para> + </listitem> + <listitem> + <para> + The GNOME 3 desktop manager module sports an interface to + enable/disable core services, applications, and optional GNOME + packages like games. + </para> + <itemizedlist> + <listitem> + <para> + <literal>services.gnome3.core-os-services.enable</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.gnome3.core-shell.enable</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.gnome3.core-utilities.enable</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.gnome3.games.enable</literal> + </para> + </listitem> + </itemizedlist> + <para> + With these options we hope to give users finer grained control + over their systems. Prior to this change you'd either have to + manually disable options or use + <literal>environment.gnome3.excludePackages</literal> which + only excluded the optional applications. + <literal>environment.gnome3.excludePackages</literal> is now + unguarded, it can exclude any package installed with + <literal>environment.systemPackages</literal> in the GNOME 3 + module. + </para> + </listitem> + <listitem> + <para> + Orthogonal to the previous changes to the GNOME 3 desktop + manager module, we've updated all default services and + applications to match as close as possible to a default + reference GNOME 3 experience. + </para> + <para> + <emphasis role="strong">The following changes were enacted in + <literal>services.gnome3.core-utilities.enable</literal></emphasis> + </para> + <itemizedlist> + <listitem> + <para> + <literal>accerciser</literal> + </para> + </listitem> + <listitem> + <para> + <literal>dconf-editor</literal> + </para> + </listitem> + <listitem> + <para> + <literal>evolution</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome-documents</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome-nettool</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome-power-manager</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome-todo</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome-tweaks</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gnome-usage</literal> + </para> + </listitem> + <listitem> + <para> + <literal>gucharmap</literal> + </para> + </listitem> + <listitem> + <para> + <literal>nautilus-sendto</literal> + </para> + </listitem> + <listitem> + <para> + <literal>vinagre</literal> + </para> + </listitem> + <listitem> + <para> + <literal>cheese</literal> + </para> + </listitem> + <listitem> + <para> + <literal>geary</literal> + </para> + </listitem> + </itemizedlist> + <para> + <emphasis role="strong">The following changes were enacted in + <literal>services.gnome3.core-shell.enable</literal></emphasis> + </para> + <itemizedlist> + <listitem> + <para> + <literal>gnome-color-manager</literal> + </para> + </listitem> + <listitem> + <para> + <literal>orca</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.avahi.enable</literal> + </para> + </listitem> + </itemizedlist> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-19.09-new-services"> + <title>New Services</title> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + <literal>./programs/dwm-status.nix</literal> + </para> + </listitem> + <listitem> + <para> + The new <literal>hardware.printers</literal> module allows to + declaratively configure CUPS printers via the + <literal>ensurePrinters</literal> and + <literal>ensureDefaultPrinter</literal> options. + <literal>ensurePrinters</literal> will never delete existing + printers, but will make sure that the given printers are + configured as declared. + </para> + </listitem> + <listitem> + <para> + There is a new + <link xlink:href="options.html#opt-services.system-config-printer.enable">services.system-config-printer.enable</link> + and + <link xlink:href="options.html#opt-programs.system-config-printer.enable">programs.system-config-printer.enable</link> + module for the program of the same name. If you previously had + <literal>system-config-printer</literal> enabled through some + other means you should migrate to using one of these modules. + </para> + <itemizedlist> + <listitem> + <para> + <literal>services.xserver.desktopManager.plasma5</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.desktopManager.gnome3</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.desktopManager.pantheon</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.desktopManager.mate</literal> + Note Mate uses + <literal>programs.system-config-printer</literal> as it + doesn't use it as a service, but its graphical interface + directly. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.blueman.enable">services.blueman.enable</link> + has been added. If you previously had blueman installed via + <literal>environment.systemPackages</literal> please migrate + to using the NixOS module, as this would result in an + insufficiently configured blueman. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-19.09-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + Buildbot no longer supports Python 2, as support was dropped + upstream in version 2.0.0. Configurations may need to be + modified to make them compatible with Python 3. + </para> + </listitem> + <listitem> + <para> + PostgreSQL now uses <literal>/run/postgresql</literal> as its + socket directory instead of <literal>/tmp</literal>. So if you + run an application like eg. Nextcloud, where you need to use + the Unix socket path as the database host name, you need to + change it accordingly. + </para> + </listitem> + <listitem> + <para> + PostgreSQL 9.4 is scheduled EOL during the 19.09 life cycle + and has been removed. + </para> + </listitem> + <listitem> + <para> + The options + <literal>services.prometheus.alertmanager.user</literal> and + <literal>services.prometheus.alertmanager.group</literal> have + been removed because the alertmanager service is now using + systemd's + <link xlink:href="http://0pointer.net/blog/dynamic-users-with-systemd.html"> + DynamicUser mechanism</link> which obviates these options. + </para> + </listitem> + <listitem> + <para> + The NetworkManager systemd unit was renamed back from + network-manager.service to NetworkManager.service for better + compatibility with other applications expecting this name. The + same applies to ModemManager where modem-manager.service is + now called ModemManager.service again. + </para> + </listitem> + <listitem> + <para> + The <literal>services.nzbget.configFile</literal> and + <literal>services.nzbget.openFirewall</literal> options were + removed as they are managed internally by the nzbget. The + <literal>services.nzbget.dataDir</literal> option hadn't + actually been used by the module for some time and so was + removed as cleanup. + </para> + </listitem> + <listitem> + <para> + The <literal>services.mysql.pidDir</literal> option was + removed, as it was only used by the wordpress apache-httpd + service to wait for mysql to have started up. This can be + accomplished by either describing a dependency on + mysql.service (preferred) or waiting for the (hardcoded) + <literal>/run/mysqld/mysql.sock</literal> file to appear. + </para> + </listitem> + <listitem> + <para> + The <literal>services.emby.enable</literal> module has been + removed, see <literal>services.jellyfin.enable</literal> + instead for a free software fork of Emby. See the Jellyfin + documentation: + <link xlink:href="https://jellyfin.readthedocs.io/en/latest/administrator-docs/migrate-from-emby/"> + Migrating from Emby to Jellyfin </link> + </para> + </listitem> + <listitem> + <para> + IPv6 Privacy Extensions are now enabled by default for + undeclared interfaces. The previous behaviour was quite + misleading — even though the default value for + <literal>networking.interfaces.*.preferTempAddress</literal> + was <literal>true</literal>, undeclared interfaces would not + prefer temporary addresses. Now, interfaces not mentioned in + the config will prefer temporary addresses. EUI64 addresses + can still be set as preferred by explicitly setting the option + to <literal>false</literal> for the interface in question. + </para> + </listitem> + <listitem> + <para> + Since Bittorrent Sync was superseded by Resilio Sync in 2016, + the <literal>bittorrentSync</literal>, + <literal>bittorrentSync14</literal>, and + <literal>bittorrentSync16</literal> packages have been removed + in favor of <literal>resilio-sync</literal>. + </para> + <para> + The corresponding module, <literal>services.btsync</literal> + has been replaced by the <literal>services.resilio</literal> + module. + </para> + </listitem> + <listitem> + <para> + The httpd service no longer attempts to start the postgresql + service. If you have come to depend on this behaviour then you + can preserve the behavior with the following configuration: + <literal>systemd.services.httpd.after = [ "postgresql.service" ];</literal> + </para> + <para> + The option <literal>services.httpd.extraSubservices</literal> + has been marked as deprecated. You may still use this feature, + but it will be removed in a future release of NixOS. You are + encouraged to convert any httpd subservices you may have + written to a full NixOS module. + </para> + <para> + Most of the httpd subservices packaged with NixOS have been + replaced with full NixOS modules including LimeSurvey, + WordPress, and Zabbix. These modules can be enabled using the + <literal>services.limesurvey.enable</literal>, + <literal>services.mediawiki.enable</literal>, + <literal>services.wordpress.enable</literal>, and + <literal>services.zabbixWeb.enable</literal> options. + </para> + </listitem> + <listitem> + <para> + The option + <literal>systemd.network.networks.<name>.routes.*.routeConfig.GatewayOnlink</literal> + was renamed to + <literal>systemd.network.networks.<name>.routes.*.routeConfig.GatewayOnLink</literal> + (capital <literal>L</literal>). This follows + <link xlink:href="https://github.com/systemd/systemd/commit/9cb8c5593443d24c19e40bfd4fc06d672f8c554c"> + upstreams renaming </link> of the setting. + </para> + </listitem> + <listitem> + <para> + As of this release the NixOps feature + <literal>autoLuks</literal> is deprecated. It no longer works + with our systemd version without manual intervention. + </para> + <para> + Whenever the usage of the module is detected the evaluation + will fail with a message explaining why and how to deal with + the situation. + </para> + <para> + A new knob named + <literal>nixops.enableDeprecatedAutoLuks</literal> has been + introduced to disable the eval failure and to acknowledge the + notice was received and read. If you plan on using the feature + please note that it might break with subsequent updates. + </para> + <para> + Make sure you set the <literal>_netdev</literal> option for + each of the file systems referring to block devices provided + by the autoLuks module. Not doing this might render the system + in a state where it doesn't boot anymore. + </para> + <para> + If you are actively using the <literal>autoLuks</literal> + module please let us know in + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/62211">issue + #62211</link>. + </para> + </listitem> + <listitem> + <para> + The setopt declarations will be evaluated at the end of + <literal>/etc/zshrc</literal>, so any code in + <link xlink:href="options.html#opt-programs.zsh.interactiveShellInit">programs.zsh.interactiveShellInit</link>, + <link xlink:href="options.html#opt-programs.zsh.loginShellInit">programs.zsh.loginShellInit</link> + and + <link xlink:href="options.html#opt-programs.zsh.promptInit">programs.zsh.promptInit</link> + may break if it relies on those options being set. + </para> + </listitem> + <listitem> + <para> + The <literal>prometheus-nginx-exporter</literal> package now + uses the offical exporter provided by NGINX Inc. Its metrics + are differently structured and are incompatible to the old + ones. For information about the metrics, have a look at the + <link xlink:href="https://github.com/nginxinc/nginx-prometheus-exporter">official + repo</link>. + </para> + </listitem> + <listitem> + <para> + The <literal>shibboleth-sp</literal> package has been updated + to version 3. It is largely backward compatible, for further + information refer to the + <link xlink:href="https://wiki.shibboleth.net/confluence/display/SP3/ReleaseNotes">release + notes</link> and + <link xlink:href="https://wiki.shibboleth.net/confluence/display/SP3/UpgradingFromV2">upgrade + guide</link>. + </para> + <para> + Nodejs 8 is scheduled EOL under the lifetime of 19.09 and has + been dropped. + </para> + </listitem> + <listitem> + <para> + By default, prometheus exporters are now run with + <literal>DynamicUser</literal> enabled. Exporters that need a + real user, now run under a seperate user and group which + follow the pattern + <literal><exporter-name>-exporter</literal>, instead of + the previous default <literal>nobody</literal> and + <literal>nogroup</literal>. Only some exporters are affected + by the latter, namely the exporters + <literal>dovecot</literal>, <literal>node</literal>, + <literal>postfix</literal> and <literal>varnish</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>ibus-qt</literal> package is not installed by + default anymore when + <link xlink:href="options.html#opt-i18n.inputMethod.enabled">i18n.inputMethod.enabled</link> + is set to <literal>ibus</literal>. If IBus support in Qt 4.x + applications is required, add the <literal>ibus-qt</literal> + package to your + <link xlink:href="options.html#opt-environment.systemPackages">environment.systemPackages</link> + manually. + </para> + </listitem> + <listitem> + <para> + The CUPS Printing service now uses socket-based activation by + default, only starting when needed. The previous behavior can + be restored by setting + <literal>services.cups.startWhenNeeded</literal> to + <literal>false</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>services.systemhealth</literal> module has been + removed from nixpkgs due to lack of maintainer. + </para> + </listitem> + <listitem> + <para> + The <literal>services.mantisbt</literal> module has been + removed from nixpkgs due to lack of maintainer. + </para> + </listitem> + <listitem> + <para> + Squid 3 has been removed and the <literal>squid</literal> + derivation now refers to Squid 4. + </para> + </listitem> + <listitem> + <para> + The <literal>services.pdns-recursor.extraConfig</literal> + option has been replaced by + <literal>services.pdns-recursor.settings</literal>. The new + option allows setting extra configuration while being better + type-checked and mergeable. + </para> + </listitem> + <listitem> + <para> + No service depends on <literal>keys.target</literal> anymore + which is a systemd target that indicates if all + <link xlink:href="https://nixos.org/nixops/manual/#idm140737322342384">NixOps + keys</link> were successfully uploaded. Instead, + <literal><key-name>-key.service</literal> should be used + to define a dependency of a key in a service. The full issue + behind the <literal>keys.target</literal> dependency is + described at + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/67265">NixOS/nixpkgs#67265</link>. + </para> + <para> + The following services are affected by this: + </para> + <itemizedlist> + <listitem> + <para> + <link xlink:href="options.html#opt-services.dovecot2.enable"><literal>services.dovecot2</literal></link> + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.nsd.enable"><literal>services.nsd</literal></link> + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.softether.enable"><literal>services.softether</literal></link> + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.strongswan.enable"><literal>services.strongswan</literal></link> + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.strongswan-swanctl.enable"><literal>services.strongswan-swanctl</literal></link> + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.httpd.enable"><literal>services.httpd</literal></link> + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The <literal>security.acme.directory</literal> option has been + replaced by a read-only + <literal>security.acme.certs.<cert>.directory</literal> + option for each certificate you define. This will be a + subdirectory of <literal>/var/lib/acme</literal>. You can use + this read-only option to figure out where the certificates are + stored for a specific certificate. For example, the + <literal>services.nginx.virtualhosts.<name>.enableACME</literal> + option will use this directory option to find the certs for + the virtual host. + </para> + <para> + <literal>security.acme.preDelay</literal> and + <literal>security.acme.activationDelay</literal> options have + been removed. To execute a service before certificates are + provisioned or renewed add a + <literal>RequiredBy=acme-${cert}.service</literal> to any + service. + </para> + <para> + Furthermore, the acme module will not automatically add a + dependency on <literal>lighttpd.service</literal> anymore. If + you are using certficates provided by letsencrypt for + lighttpd, then you should depend on the certificate service + <literal>acme-${cert}.service></literal> manually. + </para> + <para> + For nginx, the dependencies are still automatically managed + when + <literal>services.nginx.virtualhosts.<name>.enableACME</literal> + is enabled just like before. What changed is that nginx now + directly depends on the specific certificates that it needs, + instead of depending on the catch-all + <literal>acme-certificates.target</literal>. This target unit + was also removed from the codebase. This will mean nginx will + no longer depend on certificates it isn't explicitly managing + and fixes a bug with certificate renewal ordering racing with + nginx restarting which could lead to nginx getting in a broken + state as described at + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/60180">NixOS/nixpkgs#60180</link>. + </para> + </listitem> + <listitem> + <para> + The old deprecated <literal>emacs</literal> package sets have + been dropped. What used to be called + <literal>emacsPackagesNg</literal> is now simply called + <literal>emacsPackages</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.desktopManager.xterm</literal> is + now disabled by default if <literal>stateVersion</literal> is + 19.09 or higher. Previously the xterm desktopManager was + enabled when xserver was enabled, but it isn't useful for all + people so it didn't make sense to have any desktopManager + enabled default. + </para> + </listitem> + <listitem> + <para> + The WeeChat plugin + <literal>pkgs.weechatScripts.weechat-xmpp</literal> has been + removed as it doesn't receive any updates from upstream and + depends on outdated Python2-based modules. + </para> + </listitem> + <listitem> + <para> + Old unsupported versions (<literal>logstash5</literal>, + <literal>kibana5</literal>, <literal>filebeat5</literal>, + <literal>heartbeat5</literal>, <literal>metricbeat5</literal>, + <literal>packetbeat5</literal>) of the ELK-stack and Elastic + beats have been removed. + </para> + </listitem> + <listitem> + <para> + For NixOS 19.03, both Prometheus 1 and 2 were available to + allow for a seamless transition from version 1 to 2 with + existing setups. Because Prometheus 1 is no longer developed, + it was removed. Prometheus 2 is now configured with + <literal>services.prometheus</literal>. + </para> + </listitem> + <listitem> + <para> + Citrix Receiver (<literal>citrix_receiver</literal>) has been + dropped in favor of Citrix Workspace + (<literal>citrix_workspace</literal>). + </para> + </listitem> + <listitem> + <para> + The <literal>services.gitlab</literal> module has had its + literal secret options + (<literal>services.gitlab.smtp.password</literal>, + <literal>services.gitlab.databasePassword</literal>, + <literal>services.gitlab.initialRootPassword</literal>, + <literal>services.gitlab.secrets.secret</literal>, + <literal>services.gitlab.secrets.db</literal>, + <literal>services.gitlab.secrets.otp</literal> and + <literal>services.gitlab.secrets.jws</literal>) replaced by + file-based versions + (<literal>services.gitlab.smtp.passwordFile</literal>, + <literal>services.gitlab.databasePasswordFile</literal>, + <literal>services.gitlab.initialRootPasswordFile</literal>, + <literal>services.gitlab.secrets.secretFile</literal>, + <literal>services.gitlab.secrets.dbFile</literal>, + <literal>services.gitlab.secrets.otpFile</literal> and + <literal>services.gitlab.secrets.jwsFile</literal>). This was + done so that secrets aren't stored in the world-readable nix + store, but means that for each option you'll have to create a + file with the same exact string, add "File" to the + end of the option name, and change the definition to a string + pointing to the corresponding file; e.g. + <literal>services.gitlab.databasePassword = "supersecurepassword"</literal> + becomes + <literal>services.gitlab.databasePasswordFile = "/path/to/secret_file"</literal> + where the file <literal>secret_file</literal> contains the + string <literal>supersecurepassword</literal>. + </para> + <para> + The state path (<literal>services.gitlab.statePath</literal>) + now has the following restriction: no parent directory can be + owned by any other user than <literal>root</literal> or the + user specified in <literal>services.gitlab.user</literal>; + i.e. if <literal>services.gitlab.statePath</literal> is set to + <literal>/var/lib/gitlab/state</literal>, + <literal>gitlab</literal> and all parent directories must be + owned by either <literal>root</literal> or the user specified + in <literal>services.gitlab.user</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>networking.useDHCP</literal> option is + unsupported in combination with + <literal>networking.useNetworkd</literal> in anticipation of + defaulting to it. It has to be set to <literal>false</literal> + and enabled per interface with + <literal>networking.interfaces.<name>.useDHCP = true;</literal> + </para> + </listitem> + <listitem> + <para> + The Twitter client <literal>corebird</literal> has been + dropped as + <link xlink:href="https://www.patreon.com/posts/corebirds-future-18921328">it + is discontinued and does not work against the new Twitter + API</link>. Please use the fork <literal>cawbird</literal> + instead which has been adapted to the API changes and is still + maintained. + </para> + </listitem> + <listitem> + <para> + The <literal>nodejs-11_x</literal> package has been removed as + it's EOLed by upstream. + </para> + </listitem> + <listitem> + <para> + Because of the systemd upgrade, systemd-timesyncd will no + longer work if <literal>system.stateVersion</literal> is not + set correctly. When upgrading from NixOS 19.03, please make + sure that <literal>system.stateVersion</literal> is set to + <literal>"19.03"</literal>, or lower if the + installation dates back to an earlier version of NixOS. + </para> + </listitem> + <listitem> + <para> + Due to the short lifetime of non-LTS kernel releases package + attributes like <literal>linux_5_1</literal>, + <literal>linux_5_2</literal> and <literal>linux_5_3</literal> + have been removed to discourage dependence on specific non-LTS + kernel versions in stable NixOS releases. Going forward, + versioned attributes like <literal>linux_4_9</literal> will + exist for LTS versions only. Please use + <literal>linux_latest</literal> or + <literal>linux_testing</literal> if you depend on non-LTS + releases. Keep in mind that <literal>linux_latest</literal> + and <literal>linux_testing</literal> will change versions + under the hood during the lifetime of a stable release and + might include breaking changes. + </para> + </listitem> + <listitem> + <para> + Because of the systemd upgrade, some network interfaces might + change their name. For details see + <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html#History"> + upstream docs</link> or + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/71086"> + our ticket</link>. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-19.09-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + The <literal>documentation</literal> module gained an option + named <literal>documentation.nixos.includeAllModules</literal> + which makes the generated configuration.nix 5 manual page + include all options from all NixOS modules included in a given + <literal>configuration.nix</literal> configuration file. + Currently, it is set to <literal>false</literal> by default as + enabling it frequently prevents evaluation. But the plan is to + eventually have it set to <literal>true</literal> by default. + Please set it to <literal>true</literal> now in your + <literal>configuration.nix</literal> and fix all the bugs it + uncovers. + </para> + </listitem> + <listitem> + <para> + The <literal>vlc</literal> package gained support for + Chromecast streaming, enabled by default. TCP port 8010 must + be open for it to work, so something like + <literal>networking.firewall.allowedTCPPorts = [ 8010 ];</literal> + may be required in your configuration. Also consider enabling + <link xlink:href="https://nixos.wiki/wiki/Accelerated_Video_Playback"> + Accelerated Video Playback</link> for better transcoding + performance. + </para> + </listitem> + <listitem> + <para> + The following changes apply if the + <literal>stateVersion</literal> is changed to 19.09 or higher. + For <literal>stateVersion = "19.03"</literal> or + lower the old behavior is preserved. + </para> + <itemizedlist spacing="compact"> + <listitem> + <para> + <literal>solr.package</literal> defaults to + <literal>pkgs.solr_8</literal>. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The <literal>hunspellDicts.fr-any</literal> dictionary now + ships with <literal>fr_FR.{aff,dic}</literal> which is linked + to <literal>fr-toutesvariantes.{aff,dic}</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>mysql</literal> service now runs as + <literal>mysql</literal> user. Previously, systemd did execute + it as root, and mysql dropped privileges itself. This includes + <literal>ExecStartPre=</literal> and + <literal>ExecStartPost=</literal> phases. To accomplish that, + runtime and data directory setup was delegated to + RuntimeDirectory and tmpfiles. + </para> + </listitem> + <listitem> + <para> + With the upgrade to systemd version 242 the + <literal>systemd-timesyncd</literal> service is no longer + using <literal>DynamicUser=yes</literal>. In order for the + upgrade to work we rely on an activation script to move the + state from the old to the new directory. The older directory + (prior <literal>19.09</literal>) was + <literal>/var/lib/private/systemd/timesync</literal>. + </para> + <para> + As long as the <literal>system.config.stateVersion</literal> + is below <literal>19.09</literal> the state folder will + migrated to its proper location + (<literal>/var/lib/systemd/timesync</literal>), if required. + </para> + </listitem> + <listitem> + <para> + The package <literal>avahi</literal> is now built to look up + service definitions from + <literal>/etc/avahi/services</literal> instead of its output + directory in the nix store. Accordingly the module + <literal>avahi</literal> now supports custom service + definitions via + <literal>services.avahi.extraServiceFiles</literal>, which are + then placed in the aforementioned directory. See + avahi.service5 for more information on custom service + definitions. + </para> + </listitem> + <listitem> + <para> + Since version 0.1.19, <literal>cargo-vendor</literal> honors + package includes that are specified in the + <literal>Cargo.toml</literal> file of Rust crates. + <literal>rustPlatform.buildRustPackage</literal> uses + <literal>cargo-vendor</literal> to collect and build dependent + crates. Since this change in <literal>cargo-vendor</literal> + changes the set of vendored files for most Rust packages, the + hash that use used to verify the dependencies, + <literal>cargoSha256</literal>, also changes. + </para> + <para> + The <literal>cargoSha256</literal> hashes of all in-tree + derivations that use <literal>buildRustPackage</literal> have + been updated to reflect this change. However, third-party + derivations that use <literal>buildRustPackage</literal> may + have to be updated as well. + </para> + </listitem> + <listitem> + <para> + The <literal>consul</literal> package was upgraded past + version <literal>1.5</literal>, so its deprecated legacy UI is + no longer available. + </para> + </listitem> + <listitem> + <para> + The default resample-method for PulseAudio has been changed + from the upstream default <literal>speex-float-1</literal> to + <literal>speex-float-5</literal>. Be aware that low-powered + ARM-based and MIPS-based boards will struggle with this so + you'll need to set + <literal>hardware.pulseaudio.daemon.config.resample-method</literal> + back to <literal>speex-float-1</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>phabricator</literal> package and associated + <literal>httpd.extraSubservice</literal>, as well as the + <literal>phd</literal> service have been removed from nixpkgs + due to lack of maintainer. + </para> + </listitem> + <listitem> + <para> + The <literal>mercurial</literal> + <literal>httpd.extraSubservice</literal> has been removed from + nixpkgs due to lack of maintainer. + </para> + </listitem> + <listitem> + <para> + The <literal>trac</literal> + <literal>httpd.extraSubservice</literal> has been removed from + nixpkgs because it was unmaintained. + </para> + </listitem> + <listitem> + <para> + The <literal>foswiki</literal> package and associated + <literal>httpd.extraSubservice</literal> have been removed + from nixpkgs due to lack of maintainer. + </para> + </listitem> + <listitem> + <para> + The <literal>tomcat-connector</literal> + <literal>httpd.extraSubservice</literal> has been removed from + nixpkgs. + </para> + </listitem> + <listitem> + <para> + It's now possible to change configuration in + <link xlink:href="options.html#opt-services.nextcloud.enable">services.nextcloud</link> + after the initial deploy since all config parameters are + persisted in an additional config file generated by the + module. Previously core configuration like database parameters + were set using their imperative installer after creating + <literal>/var/lib/nextcloud</literal>. + </para> + </listitem> + <listitem> + <para> + There exists now <literal>lib.forEach</literal>, which is like + <literal>map</literal>, but with arguments flipped. When + mapping function body spans many lines (or has nested + <literal>map</literal>s), it is often hard to follow which + list is modified. + </para> + <para> + Previous solution to this problem was either to use + <literal>lib.flip map</literal> idiom or extract that + anonymous mapping function to a named one. Both can still be + used but <literal>lib.forEach</literal> is preferred over + <literal>lib.flip map</literal>. + </para> + <para> + The <literal>/etc/sysctl.d/nixos.conf</literal> file + containing all the options set via + <link xlink:href="options.html#opt-boot.kernel.sysctl">boot.kernel.sysctl</link> + was moved to <literal>/etc/sysctl.d/60-nixos.conf</literal>, + as sysctl.d5 recommends prefixing all filenames in + <literal>/etc/sysctl.d</literal> with a two-digit number and a + dash to simplify the ordering of the files. + </para> + </listitem> + <listitem> + <para> + We now install the sysctl snippets shipped with systemd. + </para> + <itemizedlist> + <listitem> + <para> + Loose reverse path filtering + </para> + </listitem> + <listitem> + <para> + Source route filtering + </para> + </listitem> + <listitem> + <para> + <literal>fq_codel</literal> as a packet scheduler (this + helps to fight bufferbloat) + </para> + </listitem> + </itemizedlist> + <para> + This also configures the kernel to pass core dumps to + <literal>systemd-coredump</literal>, and restricts the SysRq + key combinations to the sync command only. These sysctl + snippets can be found in + <literal>/etc/sysctl.d/50-*.conf</literal>, and overridden via + <link xlink:href="options.html#opt-boot.kernel.sysctl">boot.kernel.sysctl</link> + (which will place the parameters in + <literal>/etc/sysctl.d/60-nixos.conf</literal>). + </para> + </listitem> + <listitem> + <para> + Core dumps are now processed by + <literal>systemd-coredump</literal> by default. + <literal>systemd-coredump</literal> behaviour can still be + modified via <literal>systemd.coredump.extraConfig</literal>. + To stick to the old behaviour (having the kernel dump to a + file called <literal>core</literal> in the working directory), + without piping it through <literal>systemd-coredump</literal>, + set <literal>systemd.coredump.enable</literal> to + <literal>false</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>systemd.packages</literal> option now also supports + generators and shutdown scripts. Old + <literal>systemd.generator-packages</literal> option has been + removed. + </para> + </listitem> + <listitem> + <para> + The <literal>rmilter</literal> package was removed with + associated module and options due deprecation by upstream + developer. Use <literal>rspamd</literal> in proxy mode + instead. + </para> + </listitem> + <listitem> + <para> + systemd cgroup accounting via the + <link xlink:href="options.html#opt-systemd.enableCgroupAccounting">systemd.enableCgroupAccounting</link> + option is now enabled by default. It now also enables the more + recent Block IO and IP accounting features. + </para> + </listitem> + <listitem> + <para> + We no longer enable custom font rendering settings with + <literal>fonts.fontconfig.penultimate.enable</literal> by + default. The defaults from fontconfig are sufficient. + </para> + </listitem> + <listitem> + <para> + The <literal>crashplan</literal> package and the + <literal>crashplan</literal> service have been removed from + nixpkgs due to crashplan shutting down the service, while the + <literal>crashplansb</literal> package and + <literal>crashplan-small-business</literal> service have been + removed from nixpkgs due to lack of maintainer. + </para> + <para> + The + <link xlink:href="options.html#opt-services.redis.enable">redis + module</link> was hardcoded to use the + <literal>redis</literal> user, <literal>/run/redis</literal> + as runtime directory and <literal>/var/lib/redis</literal> as + state directory. Note that the NixOS module for Redis now + disables kernel support for Transparent Huge Pages (THP), + because this features causes major performance problems for + Redis, e.g. (https://redis.io/topics/latency). + </para> + </listitem> + <listitem> + <para> + Using <literal>fonts.enableDefaultFonts</literal> adds a + default emoji font <literal>noto-fonts-emoji</literal>. + </para> + <itemizedlist> + <listitem> + <para> + <literal>services.xserver.enable</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs.sway.enable</literal> + </para> + </listitem> + <listitem> + <para> + <literal>programs.way-cooler.enable</literal> + </para> + </listitem> + <listitem> + <para> + <literal>services.xrdp.enable</literal> + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The <literal>altcoins</literal> categorization of packages has + been removed. You now access these packages at the top level, + ie. <literal>nix-shell -p dogecoin</literal> instead of + <literal>nix-shell -p altcoins.dogecoin</literal>, etc. + </para> + </listitem> + <listitem> + <para> + Ceph has been upgraded to v14.2.1. See the + <link xlink:href="https://ceph.com/releases/v14-2-0-nautilus-released/">release + notes</link> for details. The mgr dashboard as well as osds + backed by loop-devices is no longer explicitly supported by + the package and module. Note: There's been some issues with + python-cherrypy, which is used by the dashboard and prometheus + mgr modules (and possibly others), hence + 0000-dont-check-cherrypy-version.patch. + </para> + </listitem> + <listitem> + <para> + <literal>pkgs.weechat</literal> is now compiled against + <literal>pkgs.python3</literal>. Weechat also recommends + <link xlink:href="https://weechat.org/scripts/python3/">to use + Python3 in their docs.</link> + </para> + </listitem> + </itemizedlist> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-2003.section.xml b/nixos/doc/manual/from_md/release-notes/rl-2003.section.xml new file mode 100644 index 00000000000..53e6e1329a9 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-2003.section.xml @@ -0,0 +1,1497 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-20.03"> + <title>Release 20.03 (<quote>Markhor</quote>, 2020.04/20)</title> + <section xml:id="sec-release-20.03-highlights"> + <title>Highlights</title> + <para> + In addition to numerous new and upgraded packages, this release + has the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + Support is planned until the end of October 2020, handing over + to 20.09. + </para> + </listitem> + <listitem> + <para> + Core version changes: + </para> + <para> + gcc: 8.3.0 -> 9.2.0 + </para> + <para> + glibc: 2.27 -> 2.30 + </para> + <para> + linux: 4.19 -> 5.4 + </para> + <para> + mesa: 19.1.5 -> 19.3.3 + </para> + <para> + openssl: 1.0.2u -> 1.1.1d + </para> + </listitem> + <listitem> + <para> + Desktop version changes: + </para> + <para> + plasma5: 5.16.5 -> 5.17.5 + </para> + <para> + kdeApplications: 19.08.2 -> 19.12.3 + </para> + <para> + gnome3: 3.32 -> 3.34 + </para> + <para> + pantheon: 5.0 -> 5.1.3 + </para> + </listitem> + <listitem> + <para> + Linux kernel is updated to branch 5.4 by default (from 4.19). + </para> + </listitem> + <listitem> + <para> + Grub is updated to 2.04, adding support for booting from F2FS + filesystems and Btrfs volumes using zstd compression. Note + that some users have been unable to boot after upgrading to + 2.04 - for more information, please see + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/61718#issuecomment-617618503">this + discussion</link>. + </para> + </listitem> + <listitem> + <para> + Postgresql for NixOS service now defaults to v11. + </para> + </listitem> + <listitem> + <para> + The graphical installer image starts the graphical session + automatically. Before you'd be greeted by a tty and asked to + enter <literal>systemctl start display-manager</literal>. It + is now possible to disable the display-manager from running by + selecting the <literal>Disable display-manager</literal> quirk + in the boot menu. + </para> + </listitem> + <listitem> + <para> + GNOME 3 has been upgraded to 3.34. Please take a look at their + <link xlink:href="https://help.gnome.org/misc/release-notes/3.34">Release + Notes</link> for details. + </para> + </listitem> + <listitem> + <para> + If you enable the Pantheon Desktop Manager via + <link xlink:href="options.html#opt-services.xserver.desktopManager.pantheon.enable">services.xserver.desktopManager.pantheon.enable</link>, + we now default to also use + <link xlink:href="https://blog.elementary.io/say-hello-to-the-new-greeter/"> + Pantheon's newly designed greeter </link>. Contrary to NixOS's + usual update policy, Pantheon will receive updates during the + cycle of NixOS 20.03 when backwards compatible. + </para> + </listitem> + <listitem> + <para> + By default zfs pools will now be trimmed on a weekly basis. + Trimming is only done on supported devices (i.e. NVME or SSDs) + and should improve throughput and lifetime of these devices. + It is controlled by the + <literal>services.zfs.trim.enable</literal> varname. The zfs + scrub service + (<literal>services.zfs.autoScrub.enable</literal>) and the zfs + autosnapshot service + (<literal>services.zfs.autoSnapshot.enable</literal>) are now + only enabled if zfs is set in + <literal>config.boot.initrd.supportedFilesystems</literal> or + <literal>config.boot.supportedFilesystems</literal>. These + lists will automatically contain zfs as soon as any zfs + mountpoint is configured in <literal>fileSystems</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>nixos-option</literal> has been rewritten in C++, + speeding it up, improving correctness, and adding a + <literal>-r</literal> option which prints all options and + their values recursively. + </para> + </listitem> + <listitem> + <para> + <literal>services.xserver.desktopManager.default</literal> and + <literal>services.xserver.windowManager.default</literal> + options were replaced by a single + <link xlink:href="options.html#opt-services.xserver.displayManager.defaultSession">services.xserver.displayManager.defaultSession</link> + option to improve support for upstream session files. If you + used something like: + </para> + <programlisting language="bash"> +{ + services.xserver.desktopManager.default = "xfce"; + services.xserver.windowManager.default = "icewm"; +} +</programlisting> + <para> + you should change it to: + </para> + <programlisting language="bash"> +{ + services.xserver.displayManager.defaultSession = "xfce+icewm"; +} +</programlisting> + </listitem> + <listitem> + <para> + The testing driver implementation in NixOS is now in Python + <literal>make-test-python.nix</literal>. This was done by + Jacek Galowicz + (<link xlink:href="https://github.com/tfc">@tfc</link>), and + with the collaboration of Julian Stecklina + (<link xlink:href="https://github.com/blitz">@blitz</link>) + and Jana Traue + (<link xlink:href="https://github.com/jtraue">@jtraue</link>). + All documentation has been updated to use this testing driver, + and a vast majority of the 286 tests in NixOS were ported to + python driver. In 20.09 the Perl driver implementation, + <literal>make-test.nix</literal>, is slated for removal. This + should give users of the NixOS integration framework a + transitory period to rewrite their tests to use the Python + implementation. Users of the Perl driver will see this warning + everytime they use it: + </para> + <programlisting> +$ warning: Perl VM tests are deprecated and will be removed for 20.09. +Please update your tests to use the python test driver. +See https://github.com/NixOS/nixpkgs/pull/71684 for details. +</programlisting> + <para> + API compatibility is planned to be kept for at least the next + release with the perl driver. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-20.03-new-services"> + <title>New Services</title> + <para> + The following new services were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + The kubernetes kube-proxy now supports a new hostname + configuration + <literal>services.kubernetes.proxy.hostname</literal> which + has to be set if the hostname of the node should be non + default. + </para> + </listitem> + <listitem> + <para> + UPower's configuration is now managed by NixOS and can be + customized via <literal>services.upower</literal>. + </para> + </listitem> + <listitem> + <para> + To use Geary you should enable + <link xlink:href="options.html#opt-programs.geary.enable">programs.geary.enable</link> + instead of just adding it to + <link xlink:href="options.html#opt-environment.systemPackages">environment.systemPackages</link>. + It was created so Geary could function properly outside of + GNOME. + </para> + </listitem> + <listitem> + <para> + <literal>./config/console.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./hardware/brillo.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./hardware/tuxedo-keyboard.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/bandwhich.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/bash-my-aws.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/liboping.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./programs/traceroute.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/sanoid.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/syncoid.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/backup/zfs-replication.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/continuous-integration/buildkite-agents.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/databases/victoriametrics.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/gnome3/gnome-initial-setup.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/desktops/neard.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/games/openarena.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/hardware/fancontrol.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/mail/sympa.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/freeswitch.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/misc/mame.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/monitoring/do-agent.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/monitoring/prometheus/xmpp-alerts.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/network-filesystems/orangefs/server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/network-filesystems/orangefs/client.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/3proxy.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/corerad.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/go-shadowsocks2.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/ntp/openntpd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/shorewall.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/shorewall6.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/spacecookie.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/trickster.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/v2ray.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/xandikos.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/networking/yggdrasil.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/dokuwiki.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/gotify-server.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/grocy.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/ihatemoney</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/moinmoin.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/trac.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/trilium.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-apps/shiori.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/web-servers/ttyd.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/x11/picom.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/x11/hardware/digimend.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./services/x11/imwheel.nix</literal> + </para> + </listitem> + <listitem> + <para> + <literal>./virtualisation/cri-o.nix</literal> + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-20.03-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + The dhcpcd package + <link xlink:href="https://roy.marples.name/archives/dhcpcd-discuss/0002621.html"> + does not request IPv4 addresses for tap and bridge interfaces + anymore by default</link>. In order to still get an address on + a bridge interface, one has to disable + <literal>networking.useDHCP</literal> and explicitly enable + <literal>networking.interfaces.<name>.useDHCP</literal> + on every interface, that should get an address via DHCP. This + way, dhcpcd is configured in an explicit way about which + interface to run on. + </para> + </listitem> + <listitem> + <para> + GnuPG is now built without support for a graphical passphrase + entry by default. Please enable the + <literal>gpg-agent</literal> user service via the NixOS option + <literal>programs.gnupg.agent.enable</literal>. Note that + upstream recommends using <literal>gpg-agent</literal> and + will spawn a <literal>gpg-agent</literal> on the first + invocation of GnuPG anyway. + </para> + </listitem> + <listitem> + <para> + The <literal>dynamicHosts</literal> option has been removed + from the + <link xlink:href="options.html#opt-networking.networkmanager.enable">NetworkManager</link> + module. Allowing (multiple) regular users to override host + entries affecting the whole system opens up a huge attack + vector. There seem to be very rare cases where this might be + useful. Consider setting system-wide host entries using + <link xlink:href="options.html#opt-networking.hosts">networking.hosts</link>, + provide them via the DNS server in your network, or use + <link xlink:href="options.html#opt-environment.etc">environment.etc</link> + to add a file into + <literal>/etc/NetworkManager/dnsmasq.d</literal> reconfiguring + <literal>hostsdir</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>99-main.network</literal> file was removed. + Matching all network interfaces caused many breakages, see + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/18962">#18962</link> + and + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/71106">#71106</link>. + </para> + <para> + We already don't support the global + <link xlink:href="options.html#opt-networking.useDHCP">networking.useDHCP</link>, + <link xlink:href="options.html#opt-networking.defaultGateway">networking.defaultGateway</link> + and + <link xlink:href="options.html#opt-networking.defaultGateway6">networking.defaultGateway6</link> + options if + <link xlink:href="options.html#opt-networking.useNetworkd">networking.useNetworkd</link> + is enabled, but direct users to configure the per-device + <link xlink:href="options.html#opt-networking.interfaces">networking.interfaces.<name>….</link> + options. + </para> + </listitem> + <listitem> + <para> + The stdenv now runs all bash with <literal>set -u</literal>, + to catch the use of undefined variables. Before, it itself + used <literal>set -u</literal> but was careful to unset it so + other packages' code ran as before. Now, all bash code is held + to the same high standard, and the rather complex stateful + manipulation of the options can be discarded. + </para> + </listitem> + <listitem> + <para> + The SLIM Display Manager has been removed, as it has been + unmaintained since 2013. Consider migrating to a different + display manager such as LightDM (current default in NixOS), + SDDM, GDM, or using the startx module which uses Xinitrc. + </para> + </listitem> + <listitem> + <para> + The Way Cooler wayland compositor has been removed, as the + project has been officially canceled. There are no more + <literal>way-cooler</literal> attribute and + <literal>programs.way-cooler</literal> options. + </para> + </listitem> + <listitem> + <para> + The BEAM package set has been deleted. You will only find + there the different interpreters. You should now use the + different build tools coming with the languages with sandbox + mode disabled. + </para> + </listitem> + <listitem> + <para> + There is now only one Xfce package-set and module. This means + that attributes <literal>xfce4-14</literal> and + <literal>xfceUnstable</literal> all now point to the latest + Xfce 4.14 packages. And in the future NixOS releases will be + the latest released version of Xfce available at the time of + the release's development (if viable). + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.phpfpm.pools">phpfpm</link> + module now sets <literal>PrivateTmp=true</literal> in its + systemd units for better process isolation. If you rely on + <literal>/tmp</literal> being shared with other services, + explicitly override this by setting + <literal>serviceConfig.PrivateTmp</literal> to + <literal>false</literal> for each phpfpm unit. + </para> + </listitem> + <listitem> + <para> + KDE’s old multimedia framework Phonon no longer supports Qt 4. + For that reason, Plasma desktop also does not have + <literal>enableQt4Support</literal> option any more. + </para> + </listitem> + <listitem> + <para> + The BeeGFS module has been removed. + </para> + </listitem> + <listitem> + <para> + The osquery module has been removed. + </para> + </listitem> + <listitem> + <para> + Going forward, <literal>~/bin</literal> in the users home + directory will no longer be in <literal>PATH</literal> by + default. If you depend on this you should set the option + <literal>environment.homeBinInPath</literal> to + <literal>true</literal>. The aforementioned option was added + this release. + </para> + </listitem> + <listitem> + <para> + The <literal>buildRustCrate</literal> infrastructure now + produces <literal>lib</literal> outputs in addition to the + <literal>out</literal> output. This has led to drastically + reduced closure sizes for some rust crates since development + dependencies are now in the <literal>lib</literal> output. + </para> + </listitem> + <listitem> + <para> + Pango was upgraded to 1.44, which no longer uses freetype for + font loading. This means that type1 and bitmap fonts are no + longer supported in applications relying on Pango for font + rendering (notably, GTK application). See + <link xlink:href="https://gitlab.gnome.org/GNOME/pango/issues/386"> + upstream issue</link> for more information. + </para> + </listitem> + <listitem> + <para> + The <literal>roundcube</literal> module has been hardened. + </para> + <itemizedlist> + <listitem> + <para> + The password of the database is not written world readable + in the store any more. If <literal>database.host</literal> + is set to <literal>localhost</literal>, then a unix user + of the same name as the database will be created and + PostreSQL peer authentication will be used, removing the + need for a password. Otherwise, a password is still needed + and can be provided with the new option + <literal>database.passwordFile</literal>, which should be + set to the path of a file containing the password and + readable by the user <literal>nginx</literal> only. The + <literal>database.password</literal> option is insecure + and deprecated. Usage of this option will print a warning. + </para> + </listitem> + <listitem> + <para> + A random <literal>des_key</literal> is set by default in + the configuration of roundcube, instead of using the + hardcoded and insecure default. To ensure a clean + migration, all users will be logged out when you upgrade + to this release. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The packages <literal>openobex</literal> and + <literal>obexftp</literal> are no longer installed when + enabling Bluetooth via + <literal>hardware.bluetooth.enable</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>dump1090</literal> derivation has been changed to + use FlightAware's dump1090 as its upstream. However, this + version does not have an internal webserver anymore. The + assets in the <literal>share/dump1090</literal> directory of + the derivation can be used in conjunction with an external + webserver to replace this functionality. + </para> + </listitem> + <listitem> + <para> + The fourStore and fourStoreEndpoint modules have been removed. + </para> + </listitem> + <listitem> + <para> + Polkit no longer has the user of uid 0 (root) as an admin + identity. We now follow the upstream default of only having + every member of the wheel group admin privileged. Before it + was root and members of wheel. The positive outcome of this is + pkexec GUI popups or terminal prompts will no longer require + the user to choose between two essentially equivalent choices + (whether to perform the action as themselves with wheel + permissions, or as the root user). + </para> + </listitem> + <listitem> + <para> + NixOS containers no longer build NixOS manual by default. This + saves evaluation time, especially if there are many + declarative containers defined. Note that this is already done + when + <literal><nixos/modules/profiles/minimal.nix></literal> + module is included in container config. + </para> + </listitem> + <listitem> + <para> + The <literal>kresd</literal> services deprecates the + <literal>interfaces</literal> option in favor of the + <literal>listenPlain</literal> option which requires full + <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.socket.html#ListenStream=">systemd.socket + compatible</link> declaration which always include a port. + </para> + </listitem> + <listitem> + <para> + Virtual console options have been reorganized and can be found + under a single top-level attribute: + <literal>console</literal>. The full set of changes is as + follows: + </para> + <itemizedlist> + <listitem> + <para> + <literal>i18n.consoleFont</literal> renamed to + <link xlink:href="options.html#opt-console.font">console.font</link> + </para> + </listitem> + <listitem> + <para> + <literal>i18n.consoleKeyMap</literal> renamed to + <link xlink:href="options.html#opt-console.keyMap">console.keyMap</link> + </para> + </listitem> + <listitem> + <para> + <literal>i18n.consoleColors</literal> renamed to + <link xlink:href="options.html#opt-console.colors">console.colors</link> + </para> + </listitem> + <listitem> + <para> + <literal>i18n.consolePackages</literal> renamed to + <link xlink:href="options.html#opt-console.packages">console.packages</link> + </para> + </listitem> + <listitem> + <para> + <literal>i18n.consoleUseXkbConfig</literal> renamed to + <link xlink:href="options.html#opt-console.useXkbConfig">console.useXkbConfig</link> + </para> + </listitem> + <listitem> + <para> + <literal>boot.earlyVconsoleSetup</literal> renamed to + <link xlink:href="options.html#opt-console.earlySetup">console.earlySetup</link> + </para> + </listitem> + <listitem> + <para> + <literal>boot.extraTTYs</literal> renamed to + <literal>console.extraTTYs</literal>. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.awstats.enable">awstats</link> + module has been rewritten to serve stats via static html + pages, updated on a timer, over + <link xlink:href="options.html#opt-services.nginx.virtualHosts">nginx</link>, + instead of dynamic cgi pages over + <link xlink:href="options.html#opt-services.httpd.enable">apache</link>. + </para> + <para> + Minor changes will be required to migrate existing + configurations. Details of the required changes can seen by + looking through the + <link xlink:href="options.html#opt-services.awstats.enable">awstats</link> + module. + </para> + </listitem> + <listitem> + <para> + The httpd module no longer provides options to support serving + web content without defining a virtual host. As a result of + this the + <link xlink:href="options.html#opt-services.httpd.logPerVirtualHost">services.httpd.logPerVirtualHost</link> + option now defaults to <literal>true</literal> instead of + <literal>false</literal>. Please update your configuration to + make use of + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts</link>. + </para> + <para> + The + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name></link> + option has changed type from a list of submodules to an + attribute set of submodules, better matching + <link xlink:href="options.html#opt-services.nginx.virtualHosts">services.nginx.virtualHosts.<name></link>. + </para> + <para> + This change comes with the addition of the following options + which mimic the functionality of their + <literal>nginx</literal> counterparts: + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.addSSL</link>, + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.forceSSL</link>, + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.onlySSL</link>, + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.enableACME</link>, + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.acmeRoot</link>, + and + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.useACMEHost</link>. + </para> + </listitem> + <listitem> + <para> + For NixOS configuration options, the <literal>loaOf</literal> + type has been deprecated and will be removed in a future + release. In nixpkgs, options of this type will be changed to + <literal>attrsOf</literal> instead. If you were using one of + these in your configuration, you will see a warning suggesting + what changes will be required. + </para> + <para> + For example, + <link xlink:href="options.html#opt-users.users">users.users</link> + is a <literal>loaOf</literal> option that is commonly used as + follows: + </para> + <programlisting language="bash"> +{ + users.users = + [ { name = "me"; + description = "My personal user."; + isNormalUser = true; + } + ]; +} +</programlisting> + <para> + This should be rewritten by removing the list and using the + value of <literal>name</literal> as the name of the attribute + set: + </para> + <programlisting language="bash"> +{ + users.users.me = + { description = "My personal user."; + isNormalUser = true; + }; +} +</programlisting> + <para> + For more information on this change have look at these links: + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/1800">issue + #1800</link>, + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/63103">PR + #63103</link>. + </para> + </listitem> + <listitem> + <para> + For NixOS modules, the types + <literal>types.submodule</literal> and + <literal>types.submoduleWith</literal> now support paths as + allowed values, similar to how <literal>imports</literal> + supports paths. Because of this, if you have a module that + defines an option of type + <literal>either (submodule ...) path</literal>, it will break + since a path is now treated as the first type instead of the + second. To fix this, change the type to + <literal>either path (submodule ...)</literal>. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.buildkite-agents">Buildkite + Agent</link> module and corresponding packages have been + updated to 3.x, and to support multiple instances of the agent + running at the same time. This means you will have to rename + <literal>services.buildkite-agent</literal> to + <literal>services.buildkite-agents.<name></literal>. + Furthermore, the following options have been changed: + </para> + <itemizedlist> + <listitem> + <para> + <literal>services.buildkite-agent.meta-data</literal> has + been renamed to + <link xlink:href="options.html#opt-services.buildkite-agents">services.buildkite-agents.<name>.tags</link>, + to match upstreams naming for 3.x. Its type has also + changed - it now accepts an attrset of strings. + </para> + </listitem> + <listitem> + <para> + The<literal>services.buildkite-agent.openssh.publicKeyPath</literal> + option has been removed, as it's not necessary to deploy + public keys to clone private repositories. + </para> + </listitem> + <listitem> + <para> + <literal>services.buildkite-agent.openssh.privateKeyPath</literal> + has been renamed to + <link xlink:href="options.html#opt-services.buildkite-agents">buildkite-agents.<name>.privateSshKeyPath</link>, + as the whole <literal>openssh</literal> now only contained + that single option. + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.buildkite-agents">services.buildkite-agents.<name>.shell</link> + has been introduced, allowing to specify a custom shell to + be used. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The <literal>citrix_workspace_19_3_0</literal> package has + been removed as it will be EOLed within the lifespan of 20.03. + For further information, please refer to the + <link xlink:href="https://www.citrix.com/de-de/support/product-lifecycle/milestones/receiver.html">support + and maintenance information</link> from upstream. + </para> + </listitem> + <listitem> + <para> + The <literal>gcc5</literal> and <literal>gfortran5</literal> + packages have been removed. + </para> + </listitem> + <listitem> + <para> + The <literal>services.xserver.displayManager.auto</literal> + module has been removed. It was only intended for use in + internal NixOS tests, and gave the false impression of it + being a special display manager when it's actually LightDM. + Please use the + <literal>services.xserver.displayManager.lightdm.autoLogin</literal> + options instead, or any other display manager in NixOS as they + all support auto-login. If you used this module specifically + because it permitted root auto-login you can override the + lightdm-autologin pam module like: + </para> + <programlisting language="bash"> +{ + security.pam.services.lightdm-autologin.text = lib.mkForce '' + auth requisite pam_nologin.so + auth required pam_succeed_if.so quiet + auth required pam_permit.so + + account include lightdm + + password include lightdm + + session include lightdm + ''; +} +</programlisting> + <para> + The difference is the: + </para> + <programlisting> +auth required pam_succeed_if.so quiet +</programlisting> + <para> + line, where default it's: + </para> + <programlisting> + auth required pam_succeed_if.so uid >= 1000 quiet +</programlisting> + <para> + not permitting users with uid's below 1000 (like root). All + other display managers in NixOS are configured like this. + </para> + </listitem> + <listitem> + <para> + There have been lots of improvements to the Mailman module. As + a result, + </para> + <itemizedlist> + <listitem> + <para> + The <literal>services.mailman.hyperkittyBaseUrl</literal> + option has been renamed to + <link xlink:href="options.html#opt-services.mailman.hyperkitty.baseUrl">services.mailman.hyperkitty.baseUrl</link>. + </para> + </listitem> + <listitem> + <para> + The <literal>services.mailman.hyperkittyApiKey</literal> + option has been removed. This is because having an option + for the Hyperkitty API key meant that the API key would be + stored in the world-readable Nix store, which was a + security vulnerability. A new Hyperkitty API key will be + generated the first time the new Hyperkitty service is + run, and it will then be persisted outside of the Nix + store. To continue using Hyperkitty, you must set + <link xlink:href="options.html#opt-services.mailman.hyperkitty.enable">services.mailman.hyperkitty.enable</link> + to <literal>true</literal>. + </para> + </listitem> + <listitem> + <para> + Additionally, some Postfix configuration must now be set + manually instead of automatically by the Mailman module: + </para> + <programlisting language="bash"> +{ + services.postfix.relayDomains = [ "hash:/var/lib/mailman/data/postfix_domains" ]; + services.postfix.config.transport_maps = [ "hash:/var/lib/mailman/data/postfix_lmtp" ]; + services.postfix.config.local_recipient_maps = [ "hash:/var/lib/mailman/data/postfix_lmtp" ]; +} +</programlisting> + <para> + This is because some users may want to include other + values in these lists as well, and this was not possible + if they were set automatically by the Mailman module. It + would not have been possible to just concatenate values + from multiple modules each setting the values they needed, + because the order of elements in the list is significant. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The LLVM versions 3.5, 3.9 and 4 (including the corresponding + CLang versions) have been dropped. + </para> + </listitem> + <listitem> + <para> + The + <literal>networking.interfaces.*.preferTempAddress</literal> + option has been replaced by + <literal>networking.interfaces.*.tempAddress</literal>. The + new option allows better control of the IPv6 temporary + addresses, including completely disabling them for interfaces + where they are not needed. + </para> + </listitem> + <listitem> + <para> + Rspamd was updated to version 2.2. Read + <link xlink:href="https://rspamd.com/doc/migration.html#migration-to-rspamd-20"> + the upstream migration notes</link> carefully. Please be + especially aware that some modules were removed and the + default Bayes backend is now Redis. + </para> + </listitem> + <listitem> + <para> + The <literal>*psu</literal> versions of oraclejdk8 have been + removed as they aren't provided by upstream anymore. + </para> + </listitem> + <listitem> + <para> + The <literal>services.dnscrypt-proxy</literal> module has been + removed as it used the deprecated version of dnscrypt-proxy. + We've added + <link xlink:href="options.html#opt-services.dnscrypt-proxy2.enable">services.dnscrypt-proxy2.enable</link> + to use the supported version. This module supports + configuration via the Nix attribute set + <link xlink:href="options.html#opt-services.dnscrypt-proxy2.settings">services.dnscrypt-proxy2.settings</link>, + or by passing a TOML configuration file via + <link xlink:href="options.html#opt-services.dnscrypt-proxy2.configFile">services.dnscrypt-proxy2.configFile</link>. + </para> + <programlisting language="bash"> +{ + # Example configuration: + services.dnscrypt-proxy2.enable = true; + services.dnscrypt-proxy2.settings = { + listen_addresses = [ "127.0.0.1:43" ]; + sources.public-resolvers = { + urls = [ "https://download.dnscrypt.info/resolvers-list/v2/public-resolvers.md" ]; + cache_file = "public-resolvers.md"; + minisign_key = "RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3"; + refresh_delay = 72; + }; + }; + + services.dnsmasq.enable = true; + services.dnsmasq.servers = [ "127.0.0.1#43" ]; +} +</programlisting> + </listitem> + <listitem> + <para> + <literal>qesteidutil</literal> has been deprecated in favor of + <literal>qdigidoc</literal>. + </para> + </listitem> + <listitem> + <para> + sqldeveloper_18 has been removed as it's not maintained + anymore, sqldeveloper has been updated to version + <literal>19.4</literal>. Please note that this means that this + means that the oraclejdk is now required. For further + information please read the + <link xlink:href="https://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/sqldev-relnotes-194-5908846.html">release + notes</link>. + </para> + </listitem> + <listitem> + <para> + Haskell <literal>env</literal> and <literal>shellFor</literal> + dev shell environments now organize dependencies the same way + as regular builds. In particular, rather than receiving all + the different lists of dependencies mashed together as one big + list, and then partitioning into Haskell and non-Hakell + dependencies, they work from the original many different + dependency parameters and don't need to algorithmically + partition anything. + </para> + <para> + This means that if you incorrectly categorize a dependency, + e.g. non-Haskell library dependency as a + <literal>buildDepends</literal> or run-time Haskell dependency + as a <literal>setupDepends</literal>, whereas things would + have worked before they may not work now. + </para> + </listitem> + <listitem> + <para> + The gcc-snapshot-package has been removed. It's marked as + broken for >2 years and used to point to a fairly old + snapshot from the gcc7-branch. + </para> + </listitem> + <listitem> + <para> + The nixos-build-vms8 -script now uses the python test-driver. + </para> + </listitem> + <listitem> + <para> + The riot-web package now accepts configuration overrides as an + attribute set instead of a string. A formerly used JSON + configuration can be converted to an attribute set with + <literal>builtins.fromJSON</literal>. + </para> + <para> + The new default configuration also disables automatic guest + account registration and analytics to improve privacy. The + previous behavior can be restored by setting + <literal>config.riot-web.conf = { disable_guests = false; piwik = true; }</literal>. + </para> + </listitem> + <listitem> + <para> + Stand-alone usage of <literal>Upower</literal> now requires + <literal>services.upower.enable</literal> instead of just + installing into + <link xlink:href="options.html#opt-environment.systemPackages">environment.systemPackages</link>. + </para> + </listitem> + <listitem> + <para> + nextcloud has been updated to <literal>v18.0.2</literal>. This + means that users from NixOS 19.09 can't upgrade directly since + you can only move one version forward and 19.09 uses + <literal>v16.0.8</literal>. + </para> + <para> + To provide a safe upgrade-path and to circumvent similar + issues in the future, the following measures were taken: + </para> + <itemizedlist> + <listitem> + <para> + The pkgs.nextcloud-attribute has been removed and replaced + with versioned attributes (currently pkgs.nextcloud17 and + pkgs.nextcloud18). With this change major-releases can be + backported without breaking stuff and to make + upgrade-paths easier. + </para> + </listitem> + <listitem> + <para> + Existing setups will be detected using + <link xlink:href="options.html#opt-system.stateVersion">system.stateVersion</link>: + by default, nextcloud17 will be used, but will raise a + warning which notes that after that deploy it's + recommended to update to the latest stable version + (nextcloud18) by declaring the newly introduced setting + <link xlink:href="options.html#opt-services.nextcloud.package">services.nextcloud.package</link>. + </para> + </listitem> + <listitem> + <para> + Users with an overlay (e.g. to use nextcloud at version + <literal>v18</literal> on <literal>19.09</literal>) will + get an evaluation error by default. This is done to ensure + that our + <link xlink:href="options.html#opt-services.nextcloud.package">package</link>-option + doesn't select an older version by accident. It's + recommended to use pkgs.nextcloud18 or to set + <link xlink:href="options.html#opt-services.nextcloud.package">package</link> + to pkgs.nextcloud explicitly. + </para> + </listitem> + </itemizedlist> + <warning> + <para> + Please note that if you're coming from + <literal>19.03</literal> or older, you have to manually + upgrade to <literal>19.09</literal> first to upgrade your + server to Nextcloud v16. + </para> + </warning> + </listitem> + <listitem> + <para> + Hydra has gained a massive performance improvement due to + <link xlink:href="https://github.com/NixOS/hydra/pull/710">some + database schema changes</link> by adding several IDs and + better indexing. However, it's necessary to upgrade Hydra in + multiple steps: + </para> + <itemizedlist> + <listitem> + <para> + At first, an older version of Hydra needs to be deployed + which adds those (nullable) columns. When having set + <link xlink:href="options.html#opt-system.stateVersion">stateVersion + </link> to a value older than <literal>20.03</literal>, + this package will be selected by default from the module + when upgrading. Otherwise, the package can be deployed + using the following config: + </para> + <programlisting language="bash"> +{ pkgs, ... }: { + services.hydra.package = pkgs.hydra-migration; +} +</programlisting> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Automatically fill the newly added ID columns on the server by + running the following command: + </para> + <programlisting> +$ hydra-backfill-ids +</programlisting> + <warning> + <para> + Please note that this process can take a while depending on + your database-size! + </para> + </warning> + </listitem> + <listitem> + <para> + Deploy a newer version of Hydra to activate the DB + optimizations. This can be done by using hydra-unstable. This + package already includes + <link xlink:href="https://github.com/nixos/rfcs/pull/49">flake-support</link> + and is therefore compiled against pkgs.nixFlakes. + </para> + <warning> + <para> + If your + <link xlink:href="options.html#opt-system.stateVersion">stateVersion</link> + is set to <literal>20.03</literal> or greater, + hydra-unstable will be used automatically! This will break + your setup if you didn't run the migration. + </para> + </warning> + <para> + Please note that Hydra is currently not available with + nixStable as this doesn't compile anymore. + </para> + <warning> + <para> + pkgs.hydra has been removed to ensure a graceful + database-migration using the dedicated package-attributes. + If you still have pkgs.hydra defined in e.g. an overlay, an + assertion error will be thrown. To circumvent this, you need + to set + <link xlink:href="options.html#opt-services.hydra.package">services.hydra.package</link> + to pkgs.hydra explicitly and make sure you know what you're + doing! + </para> + </warning> + </listitem> + <listitem> + <para> + The TokuDB storage engine will be disabled in mariadb 10.5. It + is recommended to switch to RocksDB. See also + <link xlink:href="https://mariadb.com/kb/en/tokudb/">TokuDB</link>. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-20.03-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + SD images are now compressed by default using + <literal>bzip2</literal>. + </para> + </listitem> + <listitem> + <para> + The nginx web server previously started its master process as + root privileged, then ran worker processes as a less + privileged identity user (the <literal>nginx</literal> user). + This was changed to start all of nginx as a less privileged + user (defined by <literal>services.nginx.user</literal> and + <literal>services.nginx.group</literal>). As a consequence, + all files that are needed for nginx to run (included + configuration fragments, SSL certificates and keys, etc.) must + now be readable by this less privileged user/group. + </para> + <para> + To continue to use the old approach, you can configure: + </para> + <programlisting language="bash"> +{ + services.nginx.appendConfig = let cfg = config.services.nginx; in ''user ${cfg.user} ${cfg.group};''; + systemd.services.nginx.serviceConfig.User = lib.mkForce "root"; +} +</programlisting> + </listitem> + <listitem> + <para> + OpenSSH has been upgraded from 7.9 to 8.1, improving security + and adding features but with potential incompatibilities. + Consult the + <link xlink:href="https://www.openssh.com/txt/release-8.1"> + release announcement</link> for more information. + </para> + </listitem> + <listitem> + <para> + <literal>PRETTY_NAME</literal> in + <literal>/etc/os-release</literal> now uses the short rather + than full version string. + </para> + </listitem> + <listitem> + <para> + The ACME module has switched from simp-le to + <link xlink:href="https://github.com/go-acme/lego">lego</link> + which allows us to support DNS-01 challenges and wildcard + certificates. The following options have been added: + <link xlink:href="options.html#opt-security.acme.acceptTerms">security.acme.acceptTerms</link>, + <link xlink:href="options.html#opt-security.acme.certs">security.acme.certs.<name>.dnsProvider</link>, + <link xlink:href="options.html#opt-security.acme.certs">security.acme.certs.<name>.credentialsFile</link>, + <link xlink:href="options.html#opt-security.acme.certs">security.acme.certs.<name>.dnsPropagationCheck</link>. + As well as this, the options + <literal>security.acme.acceptTerms</literal> and either + <literal>security.acme.email</literal> or + <literal>security.acme.certs.<name>.email</literal> must + be set in order to use the ACME module. Certificates will be + regenerated on activation, no account or certificate will be + migrated from simp-le. In particular private keys will not be + preserved. However, the credentials for simp-le are preserved + and thus it is possible to roll back to previous versions + without breaking certificate generation. Note also that in + contrary to simp-le a new private key is recreated at each + renewal by default, which can have consequences if you embed + your public key in apps. + </para> + </listitem> + <listitem> + <para> + It is now possible to unlock LUKS-Encrypted file systems using + a FIDO2 token via + <literal>boot.initrd.luks.fido2Support</literal>. + </para> + </listitem> + <listitem> + <para> + Predictably named network interfaces get renamed in stage-1. + This means that it is possible to use the proper interface + name for e.g. Dropbear setups. + </para> + <para> + For further reference, please read + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/68953">#68953</link> + or the corresponding + <link xlink:href="https://discourse.nixos.org/t/predictable-network-interface-names-in-initrd/4055">discourse + thread</link>. + </para> + </listitem> + <listitem> + <para> + The matrix-synapse-package has been updated to + <link xlink:href="https://github.com/matrix-org/synapse/releases/tag/v1.11.1">v1.11.1</link>. + Due to + <link xlink:href="https://github.com/matrix-org/synapse/releases/tag/v1.10.0rc1">stricter + requirements</link> for database configuration when using + postgresql, the automated database setup of the module has + been removed to avoid any further edge-cases. + </para> + <para> + matrix-synapse expects <literal>postgresql</literal>-databases + to have the options <literal>LC_COLLATE</literal> and + <literal>LC_CTYPE</literal> set to + <link xlink:href="https://www.postgresql.org/docs/12/locale.html"><literal>'C'</literal></link> + which basically instructs <literal>postgresql</literal> to + ignore any locale-based preferences. + </para> + <para> + Depending on your setup, you need to incorporate one of the + following changes in your setup to upgrade to 20.03: + </para> + <itemizedlist> + <listitem> + <para> + If you use <literal>sqlite3</literal> you don't need to do + anything. + </para> + </listitem> + <listitem> + <para> + If you use <literal>postgresql</literal> on a different + server, you don't need to change anything as well since + this module was never designed to configure remote + databases. + </para> + </listitem> + <listitem> + <para> + If you use <literal>postgresql</literal> and configured + your synapse initially on <literal>19.09</literal> or + older, you simply need to enable postgresql-support + explicitly: + </para> + <programlisting language="bash"> +{ ... }: { + services.matrix-synapse = { + enable = true; + /* and all the other config you've defined here */ + }; + services.postgresql.enable = true; +} +</programlisting> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + If you deploy a fresh matrix-synapse, you need to configure + the database yourself (e.g. by using the + <link xlink:href="options.html#opt-services.postgresql.initialScript">services.postgresql.initialScript</link> + option). An example for this can be found in the + <link linkend="module-services-matrix">documentation of the + Matrix module</link>. + </para> + </listitem> + <listitem> + <para> + If you initially deployed your matrix-synapse on + <literal>nixos-unstable</literal> <emphasis>after</emphasis> + the <literal>19.09</literal>-release, your database is + misconfigured due to a regression in NixOS. For now, + matrix-synapse will startup with a warning, but it's + recommended to reconfigure the database to set the values + <literal>LC_COLLATE</literal> and <literal>LC_CTYPE</literal> + to + <link xlink:href="https://www.postgresql.org/docs/12/locale.html"><literal>'C'</literal></link>. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-systemd.network.links">systemd.network.links</link> + option is now respected even when + <link xlink:href="options.html#opt-systemd.network.enable">systemd-networkd</link> + is disabled. This mirrors the behaviour of systemd - It's udev + that parses <literal>.link</literal> files, not + <literal>systemd-networkd</literal>. + </para> + </listitem> + <listitem> + <para> + mongodb has been updated to version <literal>3.4.24</literal>. + </para> + <warning> + <para> + Please note that mongodb has been relicensed under their own + <link xlink:href="https://www.mongodb.com/licensing/server-side-public-license/faq"><literal> sspl</literal></link>-license. + Since it's not entirely free and not OSI-approved, it's + listed as non-free. This means that Hydra doesn't provide + prebuilt mongodb-packages and needs to be built locally. + </para> + </warning> + </listitem> + </itemizedlist> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-2009.section.xml b/nixos/doc/manual/from_md/release-notes/rl-2009.section.xml new file mode 100644 index 00000000000..c74d850b2c6 --- /dev/null +++ b/nixos/doc/manual/from_md/release-notes/rl-2009.section.xml @@ -0,0 +1,2206 @@ +<section xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="sec-release-20.09"> + <title>Release 20.09 (<quote>Nightingale</quote>, 2020.10/27)</title> + <para> + Support is planned until the end of June 2021, handing over to + 21.05. (Plans + <link xlink:href="https://github.com/NixOS/rfcs/blob/master/rfcs/0080-nixos-release-schedule.md#core-changes"> + have shifted</link> by two months since release of 20.09.) + </para> + <section xml:id="sec-release-20.09-highlights"> + <title>Highlights</title> + <para> + In addition to 7349 new, 14442 updated, and 8181 removed packages, + this release has the following highlights: + </para> + <itemizedlist> + <listitem> + <para> + Core version changes: + </para> + <itemizedlist> + <listitem> + <para> + gcc: 9.2.0 -> 9.3.0 + </para> + </listitem> + <listitem> + <para> + glibc: 2.30 -> 2.31 + </para> + </listitem> + <listitem> + <para> + linux: still defaults to 5.4.x, all supported kernels + available + </para> + </listitem> + <listitem> + <para> + mesa: 19.3.5 -> 20.1.7 + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Desktop Environments: + </para> + <itemizedlist> + <listitem> + <para> + plasma5: 5.17.5 -> 5.18.5 + </para> + </listitem> + <listitem> + <para> + kdeApplications: 19.12.3 -> 20.08.1 + </para> + </listitem> + <listitem> + <para> + gnome3: 3.34 -> 3.36, see its + <link xlink:href="https://help.gnome.org/misc/release-notes/3.36/">release + notes</link> + </para> + </listitem> + <listitem> + <para> + cinnamon: added at 4.6 + </para> + </listitem> + <listitem> + <para> + NixOS now distributes an official + <link xlink:href="https://nixos.org/download.html#nixos-iso">GNOME + ISO</link> + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Programming Languages and Frameworks: + </para> + <itemizedlist> + <listitem> + <para> + Agda ecosystem was heavily reworked (see more details + below) + </para> + </listitem> + <listitem> + <para> + PHP now defaults to PHP 7.4, updated from 7.3 + </para> + </listitem> + <listitem> + <para> + PHP 7.2 is no longer supported due to upstream not + supporting this version for the entire lifecycle of the + 20.09 release + </para> + </listitem> + <listitem> + <para> + Python 3 now defaults to Python 3.8 instead of 3.7 + </para> + </listitem> + <listitem> + <para> + Python 3.5 reached its upstream EOL at the end of + September 2020: it has been removed from the list of + available packages + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Databases and Service Monitoring: + </para> + <itemizedlist> + <listitem> + <para> + MariaDB has been updated to 10.4, MariaDB Galera to 26.4. + Please read the related upgrade instructions under + <link linkend="sec-release-20.09-incompatibilities">backwards + incompatibilities</link> before upgrading. + </para> + </listitem> + <listitem> + <para> + Zabbix now defaults to 5.0, updated from 4.4. Please read + related sections under + <link linkend="sec-release-20.09-incompatibilities">backwards + compatibilities</link> before upgrading. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Major module changes: + </para> + <itemizedlist> + <listitem> + <para> + Quickly configure a complete, private, self-hosted video + conferencing solution with the new Jitsi Meet module. + </para> + </listitem> + <listitem> + <para> + Two new options, + <link xlink:href="options.html#opt-services.openssh.authorizedKeysCommand">authorizedKeysCommand</link> + and + <link xlink:href="options.html#opt-services.openssh.authorizedKeysCommandUser">authorizedKeysCommandUser</link>, + have been added to the <literal>openssh</literal> module. + If you have <literal>AuthorizedKeysCommand</literal> in + your + <link xlink:href="options.html#opt-services.openssh.extraConfig">services.openssh.extraConfig</link> + you should make use of these new options instead. + </para> + </listitem> + <listitem> + <para> + There is a new module for Podman + (<literal>virtualisation.podman</literal>), a drop-in + replacement for the Docker command line. + </para> + </listitem> + <listitem> + <para> + The new <literal>virtualisation.containers</literal> + module manages configuration shared by the CRI-O and + Podman modules. + </para> + </listitem> + <listitem> + <para> + Declarative Docker containers are renamed from + <literal>docker-containers</literal> to + <literal>virtualisation.oci-containers.containers</literal>. + This is to make it possible to use + <literal>podman</literal> instead of + <literal>docker</literal>. + </para> + </listitem> + <listitem> + <para> + The new option + <link xlink:href="options.html#opt-documentation.man.generateCaches">documentation.man.generateCaches</link> + has been added to automatically generate the + <literal>man-db</literal> caches, which are needed by + utilities like <literal>whatis</literal> and + <literal>apropos</literal>. The caches are generated + during the build of the NixOS configuration: since this + can be expensive when a large number of packages are + installed, the feature is disabled by default. + </para> + </listitem> + <listitem> + <para> + <literal>services.postfix.sslCACert</literal> was replaced + by + <literal>services.postfix.tlsTrustedAuthorities</literal> + which now defaults to system certificate authorities. + </para> + </listitem> + <listitem> + <para> + The various documented workarounds to use steam have been + converted to a module. + <literal>programs.steam.enable</literal> enables steam, + controller support and the workarounds. + </para> + </listitem> + <listitem> + <para> + Support for built-in LCDs in various pieces of Logitech + hardware (keyboards and USB speakers). + <literal>hardware.logitech.lcd.enable</literal> enables + support for all hardware supported by the + <link xlink:href="https://sourceforge.net/projects/g15daemon/">g15daemon + project</link>. + </para> + </listitem> + <listitem> + <para> + The GRUB module gained support for basic password + protection, which allows to restrict non-default entries + in the boot menu to one or more users. The users and + passwords are defined via the option + <literal>boot.loader.grub.users</literal>. Note: Password + support is only available in GRUB version 2. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + NixOS module changes: + </para> + <itemizedlist> + <listitem> + <para> + The NixOS module system now supports freeform modules as a + mix between <literal>types.attrsOf</literal> and + <literal>types.submodule</literal>. These allow you to + explicitly declare a subset of options while still + permitting definitions without an associated option. See + <xref linkend="sec-freeform-modules" /> for how to use + them. + </para> + </listitem> + <listitem> + <para> + Following its deprecation in 20.03, the Perl NixOS test + driver has been removed. All remaining tests have been + ported to the Python test framework. Code outside nixpkgs + using <literal>make-test.nix</literal> or + <literal>testing.nix</literal> needs to be ported to + <literal>make-test-python.nix</literal> and + <literal>testing-python.nix</literal> respectively. + </para> + </listitem> + <listitem> + <para> + Subordinate GID and UID mappings are now set up + automatically for all normal users. This will make + container tools like Podman work as non-root users out of + the box. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Starting with this release, the hydra-build-result + <literal>nixos-YY.MM</literal> branches no longer exist in the + <link xlink:href="https://github.com/nixos/nixpkgs-channels">deprecated + nixpkgs-channels repository</link>. These branches are now in + <link xlink:href="https://github.com/nixos/nixpkgs">the main + nixpkgs repository</link>. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-20.09-new-services"> + <title>New Services</title> + <para> + In addition to 1119 new, 118 updated, and 476 removed options; 61 + new modules were added since the last release: + </para> + <itemizedlist> + <listitem> + <para> + Hardware: + </para> + <itemizedlist> + <listitem> + <para> + <link xlink:href="options.html#opt-hardware.system76.firmware-daemon.enable">hardware.system76.firmware-daemon.enable</link> + adds easy support of system76 firmware + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-hardware.uinput.enable">hardware.uinput.enable</link> + loads uinput kernel module + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-hardware.video.hidpi.enable">hardware.video.hidpi.enable</link> + enable good defaults for HiDPI displays + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-hardware.wooting.enable">hardware.wooting.enable</link> + support for Wooting keyboards + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-hardware.xpadneo.enable">hardware.xpadneo.enable</link> + xpadneo driver for Xbox One wireless controllers + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Programs: + </para> + <itemizedlist> + <listitem> + <para> + <link xlink:href="options.html#opt-programs.hamster.enable">programs.hamster.enable</link> + enable hamster time tracking + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-programs.steam.enable">programs.steam.enable</link> + adds easy enablement of steam and related system + configuration + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Security: + </para> + <itemizedlist> + <listitem> + <para> + <link xlink:href="options.html#opt-security.doas.enable">security.doas.enable</link> + alternative to sudo, allows non-root users to execute + commands as root + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-security.tpm2.enable">security.tpm2.enable</link> + add Trusted Platform Module 2 support + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + System: + </para> + <itemizedlist spacing="compact"> + <listitem> + <para> + <link xlink:href="options.html#opt-boot.initrd.network.openvpn.enable">boot.initrd.network.openvpn.enable</link> + start an OpenVPN client during initrd boot + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Virtualization: + </para> + <itemizedlist> + <listitem> + <para> + <link xlink:href="options.html#opt-boot.enableContainers">boot.enableContainers</link> + use nixos-containers + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-virtualisation.oci-containers.containers">virtualisation.oci-containers.containers</link> + run OCI (Docker) containers + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-virtualisation.podman.enable">virtualisation.podman.enable</link> + daemonless container engine + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Services: + </para> + <itemizedlist> + <listitem> + <para> + <link xlink:href="options.html#opt-services.ankisyncd.enable">services.ankisyncd.enable</link> + Anki sync server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.bazarr.enable">services.bazarr.enable</link> + Subtitle manager for Sonarr and Radarr + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.biboumi.enable">services.biboumi.enable</link> + Biboumi XMPP gateway to IRC + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.blockbook-frontend">services.blockbook-frontend</link> + Blockbook-frontend, a service for the Trezor wallet + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.cage.enable">services.cage.enable</link> + Wayland cage service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.convos.enable">services.convos.enable</link> + IRC daemon, which can be accessed throught the browser + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.engelsystem.enable">services.engelsystem.enable</link> + Tool for coordinating volunteers and shifts on large + events + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.espanso.enable">services.espanso.enable</link> + text-expander written in rust + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.foldingathome.enable">services.foldingathome.enable</link> + Folding@home client + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.gerrit.enable">services.gerrit.enable</link> + Web-based team code collaboration tool + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.go-neb.enable">services.go-neb.enable</link> + Matrix bot + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.hardware.xow.enable">services.hardware.xow.enable</link> + xow as a systemd service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.hercules-ci-agent.enable">services.hercules-ci-agent.enable</link> + Hercules CI build agent + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.jicofo.enable">services.jicofo.enable</link> + Jitsi Conference Focus, component of Jitsi Meet + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.jirafeau.enable">services.jirafeau.enable</link> + A web file repository + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.jitsi-meet.enable">services.jitsi-meet.enable</link> + Secure, simple and scalable video conferences + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.jitsi-videobridge.enable">services.jitsi-videobridge.enable</link> + Jitsi Videobridge, a WebRTC compatible router + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.jupyterhub.enable">services.jupyterhub.enable</link> + Jupyterhub development server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.k3s.enable">services.k3s.enable</link> + Lightweight Kubernetes distribution + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.magic-wormhole-mailbox-server.enable">services.magic-wormhole-mailbox-server.enable</link> + Magic Wormhole Mailbox Server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.malcontent.enable">services.malcontent.enable</link> + Parental Control support + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.matrix-appservice-discord.enable">services.matrix-appservice-discord.enable</link> + Matrix and Discord bridge + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.mautrix-telegram.enable">services.mautrix-telegram.enable</link> + Matrix-Telegram puppeting/relaybot bridge + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.mirakurun.enable">services.mirakurun.enable</link> + Japanese DTV Tuner Server Service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.molly-brown.enable">services.molly-brown.enable</link> + Molly-Brown Gemini server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.mullvad-vpn.enable">services.mullvad-vpn.enable</link> + Mullvad VPN daemon + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.ncdns.enable">services.ncdns.enable</link> + Namecoin to DNS bridge + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.nextdns.enable">services.nextdns.enable</link> + NextDNS to DoH Proxy service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.nix-store-gcs-proxy">services.nix-store-gcs-proxy</link> + Google storage bucket to be used as a nix store + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.onedrive.enable">services.onedrive.enable</link> + OneDrive sync service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.pinnwand.enable">services.pinnwand.enable</link> + Pastebin-like service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.pixiecore.enable">services.pixiecore.enable</link> + Manage network booting of machines + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.privacyidea.enable">services.privacyidea.enable</link> + Privacy authentication server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.quorum.enable">services.quorum.enable</link> + Quorum blockchain daemon + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.robustirc-bridge.enable">services.robustirc-bridge.enable</link> + RobustIRC bridge + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.rss-bridge.enable">services.rss-bridge.enable</link> + Generate RSS and Atom feeds + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.rtorrent.enable">services.rtorrent.enable</link> + rTorrent service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.smartdns.enable">services.smartdns.enable</link> + SmartDNS DNS server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.sogo.enable">services.sogo.enable</link> + SOGo groupware + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.teeworlds.enable">services.teeworlds.enable</link> + Teeworlds game server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.torque.mom.enable">services.torque.mom.enable</link> + torque computing node + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.torque.server.enable">services.torque.server.enable</link> + torque server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.tuptime.enable">services.tuptime.enable</link> + A total uptime service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.urserver.enable">services.urserver.enable</link> + X11 remote server + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.wasabibackend.enable">services.wasabibackend.enable</link> + Wasabi backend service + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.yubikey-agent.enable">services.yubikey-agent.enable</link> + Yubikey agent + </para> + </listitem> + <listitem> + <para> + <link xlink:href="options.html#opt-services.zigbee2mqtt.enable">services.zigbee2mqtt.enable</link> + Zigbee to MQTT bridge + </para> + </listitem> + </itemizedlist> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-20.09-incompatibilities"> + <title>Backward Incompatibilities</title> + <para> + When upgrading from a previous release, please be aware of the + following incompatible changes: + </para> + <itemizedlist> + <listitem> + <para> + MariaDB has been updated to 10.4, MariaDB Galera to 26.4. + Before you upgrade, it would be best to take a backup of your + database. For MariaDB Galera Cluster, see + <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104-with-galera-cluster/">Upgrading + from MariaDB 10.3 to MariaDB 10.4 with Galera Cluster</link> + instead. Before doing the upgrade read + <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104/#incompatible-changes-between-103-and-104">Incompatible + Changes Between 10.3 and 10.4</link>. After the upgrade you + will need to run <literal>mysql_upgrade</literal>. MariaDB + 10.4 introduces a number of changes to the authentication + process, intended to make things easier and more intuitive. + See + <link xlink:href="https://mariadb.com/kb/en/authentication-from-mariadb-104/">Authentication + from MariaDB 10.4</link>. unix_socket auth plugin does not use + a password, and uses the connecting user's UID instead. When a + new MariaDB data directory is initialized, two MariaDB users + are created and can be used with new unix_socket auth plugin, + as well as traditional mysql_native_password plugin: + root@localhost and mysql@localhost. To actually use the + traditional mysql_native_password plugin method, one must run + the following: + </para> + <programlisting language="bash"> +{ +services.mysql.initialScript = pkgs.writeText "mariadb-init.sql" '' + ALTER USER root@localhost IDENTIFIED VIA mysql_native_password USING PASSWORD("verysecret"); +''; +} +</programlisting> + <para> + When MariaDB data directory is just upgraded (not + initialized), the users are not created or modified. + </para> + </listitem> + <listitem> + <para> + MySQL server is now started with additional systemd + sandbox/hardening options for better security. The PrivateTmp, + ProtectHome, and ProtectSystem options may be problematic when + MySQL is attempting to read from or write to your filesystem + anywhere outside of its own state directory, for example when + calling + <literal>LOAD DATA INFILE or SELECT * INTO OUTFILE</literal>. + In this scenario a variant of the following may be required: - + allow MySQL to read from /home and /tmp directories when using + <literal>LOAD DATA INFILE</literal> + </para> + <programlisting language="bash"> +{ + systemd.services.mysql.serviceConfig.ProtectHome = lib.mkForce "read-only"; +} +</programlisting> + <para> + - allow MySQL to write to custom folder + <literal>/var/data</literal> when using + <literal>SELECT * INTO OUTFILE</literal>, assuming the mysql + user has write access to <literal>/var/data</literal> + </para> + <programlisting language="bash"> +{ + systemd.services.mysql.serviceConfig.ReadWritePaths = [ "/var/data" ]; +} +</programlisting> + <para> + The MySQL service no longer runs its + <literal>systemd</literal> service startup script as + <literal>root</literal> anymore. A dedicated non + <literal>root</literal> super user account is required for + operation. This means users with an existing MySQL or MariaDB + database server are required to run the following SQL + statements as a super admin user before upgrading: + </para> + <programlisting language="SQL"> +CREATE USER IF NOT EXISTS 'mysql'@'localhost' identified with unix_socket; +GRANT ALL PRIVILEGES ON *.* TO 'mysql'@'localhost' WITH GRANT OPTION; +</programlisting> + <para> + If you use MySQL instead of MariaDB please replace + <literal>unix_socket</literal> with + <literal>auth_socket</literal>. If you have changed the value + of + <link xlink:href="options.html#opt-services.mysql.user">services.mysql.user</link> + from the default of <literal>mysql</literal> to a different + user please change <literal>'mysql'@'localhost'</literal> to + the corresponding user instead. + </para> + </listitem> + <listitem> + <para> + Zabbix now defaults to 5.0, updated from 4.4. Please carefully + read through + <link xlink:href="https://www.zabbix.com/documentation/current/manual/installation/upgrade/sources">the + upgrade guide</link> and apply any changes required. Be sure + to take special note of the section on + <link xlink:href="https://www.zabbix.com/documentation/current/manual/installation/upgrade_notes_500#enabling_extended_range_of_numeric_float_values">enabling + extended range of numeric (float) values</link> as you will + need to apply this database migration manually. + </para> + <para> + If you are using Zabbix Server with a MySQL or MariaDB + database you should note that using a character set of + <literal>utf8</literal> and a collate of + <literal>utf8_bin</literal> has become mandatory with this + release. See the upstream + <link xlink:href="https://support.zabbix.com/browse/ZBX-17357">issue</link> + for further discussion. Before upgrading you should check the + character set and collation used by your database and ensure + they are correct: + </para> + <programlisting language="SQL"> +SELECT + default_character_set_name, + default_collation_name +FROM + information_schema.schemata +WHERE + schema_name = 'zabbix'; +</programlisting> + <para> + If these values are not correct you should take a backup of + your database and convert the character set and collation as + required. Here is an + <link xlink:href="https://www.zabbix.com/forum/zabbix-help/396573-reinstall-after-upgrade?p=396891#post396891">example</link> + of how to do so, taken from the Zabbix forums: + </para> + <programlisting language="SQL"> +ALTER DATABASE `zabbix` DEFAULT CHARACTER SET utf8 COLLATE utf8_bin; + +-- the following will produce a list of SQL commands you should subsequently execute +SELECT CONCAT("ALTER TABLE ", TABLE_NAME," CONVERT TO CHARACTER SET utf8 COLLATE utf8_bin;") AS ExecuteTheString +FROM information_schema.`COLUMNS` +WHERE table_schema = "zabbix" AND COLLATION_NAME = "utf8_general_ci"; +</programlisting> + </listitem> + <listitem> + <para> + maxx package removed along with + <literal>services.xserver.desktopManager.maxx</literal> + module. Please migrate to cdesktopenv and + <literal>services.xserver.desktopManager.cde</literal> module. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.matrix-synapse.enable">matrix-synapse</link> + module no longer includes optional dependencies by default, + they have to be added through the + <link xlink:href="options.html#opt-services.matrix-synapse.plugins">plugins</link> + option. + </para> + </listitem> + <listitem> + <para> + <literal>buildGoModule</literal> now internally creates a + vendor directory in the source tree for downloaded modules + instead of using go's + <link xlink:href="https://golang.org/cmd/go/#hdr-Module_proxy_protocol">module + proxy protocol</link>. This storage format is simpler and + therefore less likely to break with future versions of go. As + a result <literal>buildGoModule</literal> switched from + <literal>modSha256</literal> to the + <literal>vendorSha256</literal> attribute to pin fetched + version data. + </para> + </listitem> + <listitem> + <para> + Grafana is now built without support for phantomjs by default. + Phantomjs support has been + <link xlink:href="https://grafana.com/docs/grafana/latest/guides/whats-new-in-v6-4/">deprecated + in Grafana</link> and the phantomjs project is + <link xlink:href="https://github.com/ariya/phantomjs/issues/15344#issue-302015362">currently + unmaintained</link>. It can still be enabled by providing + <literal>phantomJsSupport = true</literal> to the package + instantiation: + </para> + <programlisting language="bash"> +{ + services.grafana.package = pkgs.grafana.overrideAttrs (oldAttrs: rec { + phantomJsSupport = true; + }); +} +</programlisting> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.supybot.enable">supybot</link> + module now uses <literal>/var/lib/supybot</literal> as its + default + <link xlink:href="options.html#opt-services.supybot.stateDir">stateDir</link> + path if <literal>stateVersion</literal> is 20.09 or higher. It + also enables a number of + <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Sandboxing">systemd + sandboxing options</link> which may possibly interfere with + some plugins. If this is the case you can disable the options + through attributes in + <literal>systemd.services.supybot.serviceConfig</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>security.duosec.skey</literal> option, which + stored a secret in the nix store, has been replaced by a new + <link xlink:href="options.html#opt-security.duosec.secretKeyFile">security.duosec.secretKeyFile</link> + option for better security. + </para> + <para> + <literal>security.duosec.ikey</literal> has been renamed to + <link xlink:href="options.html#opt-security.duosec.integrationKey">security.duosec.integrationKey</link>. + </para> + </listitem> + <listitem> + <para> + <literal>vmware</literal> has been removed from the + <literal>services.x11.videoDrivers</literal> defaults. For + VMWare guests set + <literal>virtualisation.vmware.guest.enable</literal> to + <literal>true</literal> which will include the appropriate + drivers. + </para> + </listitem> + <listitem> + <para> + The initrd SSH support now uses OpenSSH rather than Dropbear + to allow the use of Ed25519 keys and other OpenSSH-specific + functionality. Host keys must now be in the OpenSSH format, + and at least one pre-generated key must be specified. + </para> + <para> + If you used the + <literal>boot.initrd.network.ssh.host*Key</literal> options, + you'll get an error explaining how to convert your host keys + and migrate to the new + <literal>boot.initrd.network.ssh.hostKeys</literal> option. + Otherwise, if you don't have any host keys set, you'll need to + generate some; see the <literal>hostKeys</literal> option + documentation for instructions. + </para> + </listitem> + <listitem> + <para> + Since this release there's an easy way to customize your PHP + install to get a much smaller base PHP with only wanted + extensions enabled. See the following snippet installing a + smaller PHP with the extensions <literal>imagick</literal>, + <literal>opcache</literal>, <literal>pdo</literal> and + <literal>pdo_mysql</literal> loaded: + </para> + <programlisting language="bash"> +{ + environment.systemPackages = [ + (pkgs.php.withExtensions + ({ all, ... }: with all; [ + imagick + opcache + pdo + pdo_mysql + ]) + ) + ]; +} +</programlisting> + <para> + The default <literal>php</literal> attribute hasn't lost any + extensions. The <literal>opcache</literal> extension has been + added. All upstream PHP extensions are available under + php.extensions.<name?>. + </para> + <para> + All PHP <literal>config</literal> flags have been removed for + the following reasons: + </para> + </listitem> + <listitem> + <para> + The updated <literal>php</literal> attribute is now easily + customizable to your liking by using + <literal>php.withExtensions</literal> or + <literal>php.buildEnv</literal> instead of writing config + files or changing configure flags. + </para> + </listitem> + <listitem> + <para> + The remaining configuration flags can now be set directly on + the <literal>php</literal> attribute. For example, instead of + </para> + <programlisting language="bash"> +{ + php.override { + config.php.embed = true; + config.php.apxs2 = false; + } +} +</programlisting> + <para> + you should now write + </para> + <programlisting language="bash"> +{ + php.override { + embedSupport = true; + apxs2Support = false; + } +} +</programlisting> + </listitem> + <listitem> + <para> + The ACME module has been overhauled for simplicity and + maintainability. Cert generation now implicitly uses the + <literal>acme</literal> user, and the + <literal>security.acme.certs._name_.user</literal> option has + been removed. Instead, certificate access from other services + is now managed through group permissions. The module no longer + runs lego twice under certain conditions, and will correctly + renew certificates if their configuration is changed. Services + which reload nginx and httpd after certificate renewal are now + properly configured too so you no longer have to do this + manually if you are using HTTPS enabled virtual hosts. A + mechanism for regenerating certs on demand has also been added + and documented. + </para> + </listitem> + <listitem> + <para> + Gollum received a major update to version 5.x and you may have + to change some links in your wiki when migrating from gollum + 4.x. More information can be found + <link xlink:href="https://github.com/gollum/gollum/wiki/5.0-release-notes#migrating-your-wiki">here</link>. + </para> + </listitem> + <listitem> + <para> + Deluge 2.x was added and is used as default for new NixOS + installations where stateVersion is >= 20.09. If you are + upgrading from a previous NixOS version, you can set + <literal>service.deluge.package = pkgs.deluge-2_x</literal> to + upgrade to Deluge 2.x and migrate the state to the new format. + Be aware that backwards state migrations are not supported by + Deluge. + </para> + </listitem> + <listitem> + <para> + Nginx web server now starting with additional + sandbox/hardening options. By default, write access to + <literal>/var/log/nginx</literal> and + <literal>/var/cache/nginx</literal> is allowed. To allow + writing to other folders, use + <literal>systemd.services.nginx.serviceConfig.ReadWritePaths</literal> + </para> + <programlisting language="bash"> +{ + systemd.services.nginx.serviceConfig.ReadWritePaths = [ "/var/www" ]; +} +</programlisting> + <para> + Nginx is also started with the systemd option + <literal>ProtectHome = mkDefault true;</literal> which forbids + it to read anything from <literal>/home</literal>, + <literal>/root</literal> and <literal>/run/user</literal> (see + <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.exec.html#ProtectHome=">ProtectHome + docs</link> for details). If you require serving files from + home directories, you may choose to set e.g. + </para> + <programlisting language="bash"> +{ + systemd.services.nginx.serviceConfig.ProtectHome = "read-only"; +} +</programlisting> + </listitem> + <listitem> + <para> + The NixOS options <literal>nesting.clone</literal> and + <literal>nesting.children</literal> have been deleted, and + replaced with named + <link xlink:href="options.html#opt-specialisation">specialisation</link> + configurations. + </para> + <para> + Replace a <literal>nesting.clone</literal> entry with: + </para> + <programlisting language="bash"> +{ + specialisation.example-sub-configuration = { + configuration = { + ... + }; +}; +</programlisting> + <para> + Replace a <literal>nesting.children</literal> entry with: + </para> + <programlisting language="bash"> +{ + specialisation.example-sub-configuration = { + inheritParentConfig = false; + configuration = { + ... + }; +}; +</programlisting> + <para> + To switch to a specialised configuration at runtime you need + to run: + </para> + <programlisting> +$ sudo /run/current-system/specialisation/example-sub-configuration/bin/switch-to-configuration test +</programlisting> + <para> + Before you would have used: + </para> + <programlisting> +$ sudo /run/current-system/fine-tune/child-1/bin/switch-to-configuration test +</programlisting> + </listitem> + <listitem> + <para> + The Nginx log directory has been moved to + <literal>/var/log/nginx</literal>, the cache directory to + <literal>/var/cache/nginx</literal>. The option + <literal>services.nginx.stateDir</literal> has been removed. + </para> + </listitem> + <listitem> + <para> + The httpd web server previously started its main process as + root privileged, then ran worker processes as a less + privileged identity user. This was changed to start all of + httpd as a less privileged user (defined by + <link xlink:href="options.html#opt-services.httpd.user">services.httpd.user</link> + and + <link xlink:href="options.html#opt-services.httpd.group">services.httpd.group</link>). + As a consequence, all files that are needed for httpd to run + (included configuration fragments, SSL certificates and keys, + etc.) must now be readable by this less privileged user/group. + </para> + <para> + The default value for + <link xlink:href="options.html#opt-services.httpd.mpm">services.httpd.mpm</link> + has been changed from <literal>prefork</literal> to + <literal>event</literal>. Along with this change the default + value for + <link xlink:href="options.html#opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.http2</link> + has been set to <literal>true</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>systemd-networkd</literal> option + <literal>systemd.network.networks.<name>.dhcp.CriticalConnection</literal> + has been removed following upstream systemd's deprecation of + the same. It is recommended to use + <literal>systemd.network.networks.<name>.networkConfig.KeepConfiguration</literal> + instead. See systemd.network 5 for details. + </para> + </listitem> + <listitem> + <para> + The <literal>systemd-networkd</literal> option + <literal>systemd.network.networks._name_.dhcpConfig</literal> + has been renamed to + <link xlink:href="options.html#opt-systemd.network.networks._name_.dhcpV4Config">systemd.network.networks.<emphasis>name</emphasis>.dhcpV4Config</link> + following upstream systemd's documentation change. See + systemd.network 5 for details. + </para> + </listitem> + <listitem> + <para> + In the <literal>picom</literal> module, several options that + accepted floating point numbers encoded as strings (for + example + <link xlink:href="options.html#opt-services.picom.activeOpacity">services.picom.activeOpacity</link>) + have been changed to the (relatively) new native + <literal>float</literal> type. To migrate your configuration + simply remove the quotes around the numbers. + </para> + </listitem> + <listitem> + <para> + When using <literal>buildBazelPackage</literal> from Nixpkgs, + <literal>flat</literal> hash mode is now used for dependencies + instead of <literal>recursive</literal>. This is to better + allow using hashed mirrors where needed. As a result, these + hashes will have changed. + </para> + </listitem> + <listitem> + <para> + The syntax of the PostgreSQL configuration file is now checked + at build time. If your configuration includes a file + inaccessible inside the build sandbox, set + <literal>services.postgresql.checkConfig</literal> to + <literal>false</literal>. + </para> + </listitem> + <listitem> + <para> + The rkt module has been removed, it was archived by upstream. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="https://bazaar.canonical.com">Bazaar</link> + VCS is unmaintained and, as consequence of the Python 2 EOL, + the packages <literal>bazaar</literal> and + <literal>bazaarTools</literal> were removed. Breezy, the + backward compatible fork of Bazaar (see the + <link xlink:href="https://www.jelmer.uk/breezy-intro.html">announcement</link>), + was packaged as <literal>breezy</literal> and can be used + instead. + </para> + <para> + Regarding Nixpkgs, <literal>fetchbzr</literal>, + <literal>nix-prefetch-bzr</literal> and Bazaar support in + Hydra will continue to work through Breezy. + </para> + </listitem> + <listitem> + <para> + In addition to the hostname, the fully qualified domain name + (FQDN), which consists of + <literal>${networking.hostName}</literal> and + <literal>${networking.domain}</literal> is now added to + <literal>/etc/hosts</literal>, to allow local FQDN resolution, + as used by the <literal>hostname --fqdn</literal> command and + other applications that try to determine the FQDN. These new + entries take precedence over entries from the DNS which could + cause regressions in some very specific setups. Additionally + the hostname is now resolved to <literal>127.0.0.2</literal> + instead of <literal>127.0.1.1</literal> to be consistent with + what <literal>nss-myhostname</literal> (from systemd) returns. + The old behaviour can e.g. be restored by using + <literal>networking.hosts = lib.mkForce { "127.0.1.1" = [ config.networking.hostName ]; };</literal>. + </para> + </listitem> + <listitem> + <para> + The hostname (<literal>networking.hostName</literal>) must now + be a valid DNS label (see RFC 1035, RFC 1123) and as such must + not contain the domain part. This means that the hostname must + start with a letter or digit, end with a letter or digit, and + have as interior characters only letters, digits, and hyphen. + The maximum length is 63 characters. Additionally it is + recommended to only use lower-case characters. If (e.g. for + legacy reasons) a FQDN is required as the Linux kernel network + node hostname (<literal>uname --nodename</literal>) the option + <literal>boot.kernel.sysctl."kernel.hostname"</literal> + can be used as a workaround (but be aware of the 64 character + limit). + </para> + </listitem> + <listitem> + <para> + The GRUB specific option + <literal>boot.loader.grub.extraInitrd</literal> has been + replaced with the generic option + <literal>boot.initrd.secrets</literal>. This option creates a + secondary initrd from the specified files, rather than using a + manually created initrd file. Due to an existing bug with + <literal>boot.loader.grub.extraInitrd</literal>, it is not + possible to directly boot an older generation that used that + option. It is still possible to rollback to that generation if + the required initrd file has not been deleted. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="https://github.com/okTurtles/dnschain">DNSChain</link> + package and NixOS module have been removed from Nixpkgs as the + software is unmaintained and can't be built. For more + information see issue + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/89205">#89205</link>. + </para> + </listitem> + <listitem> + <para> + In the <literal>resilio</literal> module, + <link xlink:href="options.html#opt-services.resilio.httpListenAddr">services.resilio.httpListenAddr</link> + has been changed to listen to <literal>[::1]</literal> instead + of <literal>0.0.0.0</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>sslh</literal> has been updated to version + <literal>1.21</literal>. The <literal>ssl</literal> probe must + be renamed to <literal>tls</literal> in + <link xlink:href="options.html#opt-services.sslh.appendConfig">services.sslh.appendConfig</link>. + </para> + </listitem> + <listitem> + <para> + Users of <link xlink:href="http://openafs.org">OpenAFS + 1.6</link> must upgrade their services to OpenAFS 1.8! In this + release, the OpenAFS package version 1.6.24 is marked broken + but can be used during transition to OpenAFS 1.8.x. Use the + options + <literal>services.openafsClient.packages.module</literal>, + <literal>services.openafsClient.packages.programs</literal> + and <literal>services.openafsServer.package</literal> to + select a different OpenAFS package. OpenAFS 1.6 will be + removed in the next release. The package + <literal>openafs</literal> and the service options will then + silently point to the OpenAFS 1.8 release. + </para> + <para> + See also the OpenAFS + <link xlink:href="http://docs.openafs.org/AdminGuide/index.html">Administrator + Guide</link> for instructions. Beware of the following when + updating servers: + </para> + <itemizedlist> + <listitem> + <para> + The storage format of the server key has changed and the + key must be converted before running the new release. + </para> + </listitem> + <listitem> + <para> + When updating multiple database servers, turn off the + database servers from the highest IP down to the lowest + with resting periods in between. Start up in reverse + order. Do not concurrently run database servers working + with different OpenAFS releases! + </para> + </listitem> + <listitem> + <para> + Update servers first, then clients. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Radicale's default package has changed from 2.x to 3.x. An + upgrade checklist can be found + <link xlink:href="https://github.com/Kozea/Radicale/blob/3.0.x/NEWS.md#upgrade-checklist">here</link>. + You can use the newer version in the NixOS service by setting + the <literal>package</literal> to + <literal>radicale3</literal>, which is done automatically if + <literal>stateVersion</literal> is 20.09 or higher. + </para> + </listitem> + <listitem> + <para> + <literal>udpt</literal> experienced a complete rewrite from + C++ to rust. The configuration format changed from ini to + toml. The new configuration documentation can be found at + <link xlink:href="https://naim94a.github.io/udpt/config.html">the + official website</link> and example configuration is packaged + in <literal>${udpt}/share/udpt/udpt.toml</literal>. + </para> + </listitem> + <listitem> + <para> + We now have a unified + <link xlink:href="options.html#opt-services.xserver.displayManager.autoLogin">services.xserver.displayManager.autoLogin</link> + option interface to be used for every display-manager in + NixOS. + </para> + </listitem> + <listitem> + <para> + The <literal>bitcoind</literal> module has changed to + multi-instance, using submodules. Therefore, it is now + mandatory to name each instance. To use this new + multi-instance config with an existing bitcoind data directory + and user, you have to adjust the original config, e.g.: + </para> + <programlisting language="bash"> +{ + services.bitcoind = { + enable = true; + extraConfig = "..."; + ... + }; +} +</programlisting> + <para> + To something similar: + </para> + <programlisting language="bash"> +{ + services.bitcoind.mainnet = { + enable = true; + dataDir = "/var/lib/bitcoind"; + user = "bitcoin"; + extraConfig = "..."; + ... + }; +} +</programlisting> + <para> + The key settings are: + </para> + <itemizedlist> + <listitem> + <para> + <literal>dataDir</literal> - to continue using the same + data directory. + </para> + </listitem> + <listitem> + <para> + <literal>user</literal> - to continue using the same user + so that bitcoind maintains access to its files. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + Graylog introduced a change in the LDAP server certificate + validation behaviour for version 3.3.3 which might break + existing setups. When updating Graylog from a version before + 3.3.3 make sure to check the Graylog + <link xlink:href="https://www.graylog.org/post/announcing-graylog-v3-3-3">release + info</link> for information on how to avoid the issue. + </para> + </listitem> + <listitem> + <para> + The <literal>dokuwiki</literal> module has changed to + multi-instance, using submodules. Therefore, it is now + mandatory to name each instance. Moreover, forcing SSL by + default has been dropped, so <literal>nginx.forceSSL</literal> + and <literal>nginx.enableACME</literal> are no longer set to + <literal>true</literal>. To continue using your service with + the original SSL settings, you have to adjust the original + config, e.g.: + </para> + <programlisting language="bash"> +{ + services.dokuwiki = { + enable = true; + ... + }; +} +</programlisting> + <para> + To something similar: + </para> + <programlisting language="bash"> +{ + services.dokuwiki."mywiki" = { + enable = true; + nginx = { + forceSSL = true; + enableACME = true; + }; + ... + }; +} +</programlisting> + <para> + The base package has also been upgraded to the 2020-07-29 + "Hogfather" release. Plugins might be incompatible + or require upgrading. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.postgresql.dataDir">services.postgresql.dataDir</link> + option is now set to + <literal>"/var/lib/postgresql/${cfg.package.psqlSchema}"</literal> + regardless of your + <link xlink:href="options.html#opt-system.stateVersion">system.stateVersion</link>. + Users with an existing postgresql install that have a + <link xlink:href="options.html#opt-system.stateVersion">system.stateVersion</link> + of <literal>17.03</literal> or below should double check what + the value of their + <link xlink:href="options.html#opt-services.postgresql.dataDir">services.postgresql.dataDir</link> + option is (<literal>/var/db/postgresql</literal>) and then + explicitly set this value to maintain compatibility: + </para> + <programlisting language="bash"> +{ + services.postgresql.dataDir = "/var/db/postgresql"; +} +</programlisting> + <para> + The postgresql module now expects there to be a database super + user account called <literal>postgres</literal> regardless of + your + <link xlink:href="options.html#opt-system.stateVersion">system.stateVersion</link>. + Users with an existing postgresql install that have a + <link xlink:href="options.html#opt-system.stateVersion">system.stateVersion</link> + of <literal>17.03</literal> or below should run the following + SQL statements as a database super admin user before + upgrading: + </para> + <programlisting language="SQL"> +CREATE ROLE postgres LOGIN SUPERUSER; +</programlisting> + </listitem> + <listitem> + <para> + The USBGuard module now removes options and instead hardcodes + values for <literal>IPCAccessControlFiles</literal>, + <literal>ruleFiles</literal>, and + <literal>auditFilePath</literal>. Audit logs can be found in + the journal. + </para> + </listitem> + <listitem> + <para> + The NixOS module system now evaluates option definitions more + strictly, allowing it to detect a larger set of problems. As a + result, what previously evaluated may not do so anymore. See + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/82743#issuecomment-674520472">the + PR that changed this</link> for more info. + </para> + </listitem> + <listitem> + <para> + For NixOS configuration options, the type + <literal>loaOf</literal>, after its initial deprecation in + release 20.03, has been removed. In NixOS and Nixpkgs options + using this type have been converted to + <literal>attrsOf</literal>. For more information on this + change have look at these links: + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/1800">issue + #1800</link>, + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/63103">PR + #63103</link>. + </para> + </listitem> + <listitem> + <para> + <literal>config.systemd.services.${name}.path</literal> now + returns a list of paths instead of a colon-separated string. + </para> + </listitem> + <listitem> + <para> + Caddy module now uses Caddy v2 by default. Caddy v1 can still + be used by setting + <link xlink:href="options.html#opt-services.caddy.package">services.caddy.package</link> + to <literal>pkgs.caddy1</literal>. + </para> + <para> + New option + <link xlink:href="options.html#opt-services.caddy.adapter">services.caddy.adapter</link> + has been added. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-services.jellyfin.enable">jellyfin</link> + module will use and stay on the Jellyfin version + <literal>10.5.5</literal> if <literal>stateVersion</literal> + is lower than <literal>20.09</literal>. This is because + significant changes were made to the database schema, and it + is highly recommended to backup your instance before + upgrading. After making your backup, you can upgrade to the + latest version either by setting your + <literal>stateVersion</literal> to <literal>20.09</literal> or + higher, or set the + <literal>services.jellyfin.package</literal> to + <literal>pkgs.jellyfin</literal>. If you do not wish to + upgrade Jellyfin, but want to change your + <literal>stateVersion</literal>, you can set the value of + <literal>services.jellyfin.package</literal> to + <literal>pkgs.jellyfin_10_5</literal>. + </para> + </listitem> + <listitem> + <para> + The <literal>security.rngd</literal> service is now disabled + by default. This choice was made because there's krngd in the + linux kernel space making it (for most usecases) functionally + redundent. + </para> + </listitem> + <listitem> + <para> + The <literal>hardware.nvidia.optimus_prime.enable</literal> + service has been renamed to + <literal>hardware.nvidia.prime.sync.enable</literal> and has + many new enhancements. Related nvidia prime settings may have + also changed. + </para> + </listitem> + <listitem> + <para> + The package nextcloud17 has been removed and nextcloud18 was + marked as insecure since both of them will + <link xlink:href="https://docs.nextcloud.com/server/19/admin_manual/release_schedule.html"> + will be EOL (end of life) within the lifetime of 20.09</link>. + </para> + <para> + It's necessary to upgrade to nextcloud19: + </para> + <itemizedlist> + <listitem> + <para> + From nextcloud17, you have to upgrade to nextcloud18 first + as Nextcloud doesn't allow going multiple major revisions + forward in a single upgrade. This is possible by setting + <link xlink:href="options.html#opt-services.nextcloud.package">services.nextcloud.package</link> + to nextcloud18. + </para> + </listitem> + <listitem> + <para> + From nextcloud18, it's possible to directly upgrade to + nextcloud19 by setting + <link xlink:href="options.html#opt-services.nextcloud.package">services.nextcloud.package</link> + to nextcloud19. + </para> + </listitem> + </itemizedlist> + </listitem> + <listitem> + <para> + The GNOME desktop manager no longer default installs + gnome3.epiphany. It was chosen to do this as it has a + usability breaking issue (see issue + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/98819">#98819</link>) + that makes it unsuitable to be a default app. + </para> + <note> + <para> + Issue + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/98819">#98819</link> + is now fixed and gnome3.epiphany is once again installed by + default. + </para> + </note> + </listitem> + <listitem> + <para> + If you want to manage the configuration of wpa_supplicant + outside of NixOS you must ensure that none of + <link xlink:href="options.html#opt-networking.wireless.networks">networking.wireless.networks</link>, + <link xlink:href="options.html#opt-networking.wireless.extraConfig">networking.wireless.extraConfig</link> + or + <link xlink:href="options.html#opt-networking.wireless.userControlled.enable">networking.wireless.userControlled.enable</link> + is being used or <literal>true</literal>. Using any of those + options will cause wpa_supplicant to be started with a NixOS + generated configuration file instead of your own. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-20.09-notable-changes"> + <title>Other Notable Changes</title> + <itemizedlist> + <listitem> + <para> + SD images are now compressed by default using + <literal>zstd</literal>. The compression for ISO images has + also been changed to <literal>zstd</literal>, but ISO images + are still not compressed by default. + </para> + </listitem> + <listitem> + <para> + <literal>services.journald.rateLimitBurst</literal> was + updated from <literal>1000</literal> to + <literal>10000</literal> to follow the new upstream systemd + default. + </para> + </listitem> + <listitem> + <para> + The notmuch package move its emacs-related binaries and emacs + lisp files to a separate output. They're not part of the + default <literal>out</literal> output anymore - if you relied + on the <literal>notmuch-emacs-mua</literal> binary or the + emacs lisp files, access them via the + <literal>notmuch.emacs</literal> output. Device tree overlay + support was improved in + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/79370">#79370</link> + and now uses + <link xlink:href="options.html#opt-hardware.deviceTree.kernelPackage">hardware.deviceTree.kernelPackage</link> + instead of <literal>hardware.deviceTree.base</literal>. + <link xlink:href="options.html#opt-hardware.deviceTree.overlays">hardware.deviceTree.overlays</link> + configuration was extended to support <literal>.dts</literal> + files with symbols. Device trees can now be filtered by + setting + <link xlink:href="options.html#opt-hardware.deviceTree.filter">hardware.deviceTree.filter</link> + option. + </para> + </listitem> + <listitem> + <para> + The default output of <literal>buildGoPackage</literal> is now + <literal>$out</literal> instead of <literal>$bin</literal>. + </para> + </listitem> + <listitem> + <para> + <literal>buildGoModule</literal> <literal>doCheck</literal> + now defaults to <literal>true</literal>. + </para> + </listitem> + <listitem> + <para> + Packages built using <literal>buildRustPackage</literal> now + use <literal>release</literal> mode for the + <literal>checkPhase</literal> by default. + </para> + <para> + Please note that Rust packages utilizing a custom + build/install procedure (e.g. by using a + <literal>Makefile</literal>) or test suites that rely on the + structure of the <literal>target/</literal> directory may + break due to those assumptions. For further information, + please read the Rust section in the Nixpkgs manual. + </para> + </listitem> + <listitem> + <para> + The cc- and binutils-wrapper's "infix salt" and + <literal>_BUILD_</literal> and <literal>_TARGET_</literal> + user infixes have been replaced with with a "suffix + salt" and suffixes and <literal>_FOR_BUILD</literal> and + <literal>_FOR_TARGET</literal>. This matches the autotools + convention for env vars which standard for these things, + making interfacing with other tools easier. + </para> + </listitem> + <listitem> + <para> + Additional Git documentation (HTML and text files) is now + available via the <literal>git-doc</literal> package. + </para> + </listitem> + <listitem> + <para> + Default algorithm for ZRAM swap was changed to + <literal>zstd</literal>. + </para> + </listitem> + <listitem> + <para> + The installer now enables sshd by default. This improves + installation on headless machines especially ARM + single-board-computer. To login through ssh, either a password + or an ssh key must be set for the root user or the nixos user. + </para> + </listitem> + <listitem> + <para> + The scripted networking system now uses + <literal>.link</literal> files in + <literal>/etc/systemd/network</literal> to configure mac + address and link MTU, instead of the sometimes buggy + <literal>network-link-*</literal> units, which have been + removed. Bringing the interface up has been moved to the + beginning of the <literal>network-addresses-*</literal> unit. + Note this doesn't require <literal>systemd-networkd</literal> + - it's udev that parses <literal>.link</literal> files. Extra + care needs to be taken in the presence of + <link xlink:href="https://wiki.debian.org/NetworkInterfaceNames#THE_.22PERSISTENT_NAMES.22_SCHEME">legacy + udev rules</link> to rename interfaces, as MAC Address and MTU + defined in these options can only match on the original link + name. In such cases, you most likely want to create a + <literal>10-*.link</literal> file through + <link xlink:href="options.html#opt-systemd.network.links">systemd.network.links</link> + and set both name and MAC Address / MTU there. + </para> + </listitem> + <listitem> + <para> + Grafana received a major update to version 7.x. A plugin is + now needed for image rendering support, and plugins must now + be signed by default. More information can be found + <link xlink:href="https://grafana.com/docs/grafana/latest/installation/upgrading/#upgrading-to-v7-0">in + the Grafana documentation</link>. + </para> + </listitem> + <listitem> + <para> + The <literal>hardware.u2f</literal> module, which was + installing udev rules was removed, as udev gained native + support to handle FIDO security tokens. + </para> + </listitem> + <listitem> + <para> + The <literal>services.transmission</literal> module was + enhanced with the new options: + <link xlink:href="options.html#opt-services.transmission.credentialsFile">services.transmission.credentialsFile</link>, + <link xlink:href="options.html#opt-services.transmission.openFirewall">services.transmission.openFirewall</link>, + and + <link xlink:href="options.html#opt-services.transmission.performanceNetParameters">services.transmission.performanceNetParameters</link>. + </para> + <para> + <literal>transmission-daemon</literal> is now started with + additional systemd sandbox/hardening options for better + security. Please + <link xlink:href="https://github.com/NixOS/nixpkgs/issues">report</link> + any use case where this is not working well. In particular, + the <literal>RootDirectory</literal> option newly set forbids + uploading or downloading a torrent outside of the default + directory configured at + <link xlink:href="options.html#opt-services.transmission.settings">settings.download-dir</link>. + If you really need Transmission to access other directories, + you must include those directories into the + <literal>BindPaths</literal> of the service: + </para> + <programlisting language="bash"> +{ + systemd.services.transmission.serviceConfig.BindPaths = [ "/path/to/alternative/download-dir" ]; +} +</programlisting> + <para> + Also, connection to the RPC (Remote Procedure Call) of + <literal>transmission-daemon</literal> is now only available + on the local network interface by default. Use: + </para> + <programlisting language="bash"> +{ + services.transmission.settings.rpc-bind-address = "0.0.0.0"; +} +</programlisting> + <para> + to get the previous behavior of listening on all network + interfaces. + </para> + </listitem> + <listitem> + <para> + With this release <literal>systemd-networkd</literal> (when + enabled through + <link xlink:href="options.html#opt-networking.useNetworkd">networking.useNetworkd</link>) + has it's netlink socket created through a + <literal>systemd.socket</literal> unit. This gives us control + over socket buffer sizes and other parameters. For larger + setups where networkd has to create a lot of (virtual) devices + the default buffer size (currently 128MB) is not enough. + </para> + <para> + On a machine with >100 virtual interfaces (e.g., wireguard + tunnels, VLANs, …), that all have to be brought up during + system startup, the receive buffer size will spike for a brief + period. Eventually some of the message will be dropped since + there is not enough (permitted) buffer space available. + </para> + <para> + By having <literal>systemd-networkd</literal> start with a + netlink socket created by <literal>systemd</literal> we can + configure the <literal>ReceiveBufferSize=</literal> parameter + in the socket options (i.e. + <literal>systemd.sockets.systemd-networkd.socketOptions.ReceiveBufferSize</literal>) + without recompiling <literal>systemd-networkd</literal>. + </para> + <para> + Since the actual memory requirements depend on hardware, + timing, exact configurations etc. it isn't currently possible + to infer a good default from within the NixOS module system. + Administrators are advised to monitor the logs of + <literal>systemd-networkd</literal> for + <literal>rtnl: kernel receive buffer overrun</literal> spam + and increase the memory limit as they see fit. + </para> + <para> + Note: Increasing the <literal>ReceiveBufferSize=</literal> + doesn't allocate any memory. It just increases the upper bound + on the kernel side. The memory allocation depends on the + amount of messages that are queued on the kernel side of the + netlink socket. + </para> + </listitem> + <listitem> + <para> + Specifying + <link xlink:href="options.html#opt-services.dovecot2.mailboxes">mailboxes</link> + in the dovecot2 module as a list is deprecated and will break + eval in 21.05. Instead, an attribute-set should be specified + where the <literal>name</literal> should be the key of the + attribute. + </para> + <para> + This means that a configuration like this + </para> + <programlisting language="bash"> +{ + services.dovecot2.mailboxes = [ + { name = "Junk"; + auto = "create"; + } + ]; +} +</programlisting> + <para> + should now look like this: + </para> + <programlisting language="bash"> +{ + services.dovecot2.mailboxes = { + Junk.auto = "create"; + }; +} +</programlisting> + </listitem> + <listitem> + <para> + netbeans was upgraded to 12.0 and now defaults to OpenJDK 11. + This might cause problems if your projects depend on packages + that were removed in Java 11. + </para> + </listitem> + <listitem> + <para> + nextcloud has been updated to + <link xlink:href="https://nextcloud.com/blog/nextcloud-hub-brings-productivity-to-home-office/">v19</link>. + </para> + <para> + If you have an existing installation, please make sure that + you're on nextcloud18 before upgrading to nextcloud19 since + Nextcloud doesn't support upgrades across multiple major + versions. + </para> + </listitem> + <listitem> + <para> + The <literal>nixos-run-vms</literal> script now deletes the + previous run machines states on test startup. You can use the + <literal>--keep-vm-state</literal> flag to match the previous + behaviour and keep the same VM state between different test + runs. + </para> + </listitem> + <listitem> + <para> + The + <link xlink:href="options.html#opt-nix.buildMachines">nix.buildMachines</link> + option is now type-checked. There are no functional changes, + however this may require updating some configurations to use + correct types for all attributes. + </para> + </listitem> + <listitem> + <para> + The <literal>fontconfig</literal> module stopped generating + config and cache files for fontconfig 2.10.x, the + <literal>/etc/fonts/fonts.conf</literal> now belongs to the + latest fontconfig, just like on other Linux distributions, and + we will + <link xlink:href="https://github.com/NixOS/nixpkgs/pull/95358">no + longer</link> be versioning the config directories. + </para> + <para> + Fontconfig 2.10.x was removed from Nixpkgs since it hasn’t + been used in any Nixpkgs package for years now. + </para> + </listitem> + <listitem> + <para> + Nginx module + <literal>nginxModules.fastcgi-cache-purge</literal> renamed to + official name <literal>nginxModules.cache-purge</literal>. + Nginx module <literal>nginxModules.ngx_aws_auth</literal> + renamed to official name + <literal>nginxModules.aws-auth</literal>. + </para> + </listitem> + <listitem> + <para> + The option <literal>defaultPackages</literal> was added. It + installs the packages perl, rsync and strace for now. They + were added unconditionally to + <literal>systemPackages</literal> before, but are not strictly + necessary for a minimal NixOS install. You can set it to an + empty list to have a more minimal system. Be aware that some + functionality might still have an impure dependency on those + packages, so things might break. + </para> + </listitem> + <listitem> + <para> + The <literal>undervolt</literal> option no longer needs to + apply its settings every 30s. If they still become undone, + open an issue and restore the previous behaviour using + <literal>undervolt.useTimer</literal>. + </para> + </listitem> + <listitem> + <para> + Agda has been heavily reworked. + </para> + <itemizedlist> + <listitem> + <para> + <literal>agda.mkDerivation</literal> has been heavily + changed and is now located at agdaPackages.mkDerivation. + </para> + </listitem> + <listitem> + <para> + New top-level packages agda and + <literal>agda.withPackages</literal> have been added, the + second of which sets up agda with access to chosen + libraries. + </para> + </listitem> + <listitem> + <para> + All agda libraries now live under + <literal>agdaPackages</literal>. + </para> + </listitem> + <listitem> + <para> + Many broken libraries have been removed. + </para> + </listitem> + </itemizedlist> + <para> + See the + <link xlink:href="https://nixos.org/nixpkgs/manual/#agda">new + documentation</link> for more information. + </para> + </listitem> + <listitem> + <para> + The <literal>deepin</literal> package set has been removed + from nixpkgs. It was a work in progress to package the + <link xlink:href="https://www.deepin.org/en/dde/">Deepin + Desktop Environment (DDE)</link>, including libraries, tools + and applications, and it was still missing a service to launch + the desktop environment. It has shown to no longer be a + feasible goal due to reasons discussed in + <link xlink:href="https://github.com/NixOS/nixpkgs/issues/94870">issue + #94870</link>. The package + <literal>netease-cloud-music</literal> has also been removed, + as it depends on libraries from deepin. + </para> + </listitem> + <listitem> + <para> + The <literal>opendkim</literal> module now uses systemd + sandboxing features to limit the exposure of the system + towards the opendkim service. + </para> + </listitem> + <listitem> + <para> + Kubernetes has been upgraded to 1.19.1, which also means that + the golang version to build it has been bumped to 1.15. This + may have consequences for your existing clusters and their + certificates. Please consider + <link xlink:href="https://relnotes.k8s.io/?markdown=93264"> + the release notes for Kubernetes 1.19 carefully </link> before + upgrading. + </para> + </listitem> + <listitem> + <para> + For AMD GPUs, Vulkan can now be used by adding + <literal>amdvlk</literal> to + <literal>hardware.opengl.extraPackages</literal>. + </para> + </listitem> + <listitem> + <para> + Similarly, still for AMD GPUs, the ROCm OpenCL stack can now + be used by adding <literal>rocm-opencl-icd</literal> to + <literal>hardware.opengl.extraPackages</literal>. + </para> + </listitem> + </itemizedlist> + </section> + <section xml:id="sec-release-20.09-contributions"> + <title>Contributions</title> + <para> + I, Jonathan Ringer, would like to thank the following individuals + for their work on nixpkgs. This release could not be done without + the hard work of the NixOS community. There were 31282 + contributions across 1313 contributors. + </para> + <orderedlist numeration="arabic"> + <listitem> + <para> + 2288 Mario Rodas + </para> + </listitem> + <listitem> + <para> + 1837 Frederik Rietdijk + </para> + </listitem> + <listitem> + <para> + 946 Jörg Thalheim + </para> + </listitem> + <listitem> + <para> + 925 Maximilian Bosch + </para> + </listitem> + <listitem> + <para> + 687 Jonathan Ringer + </para> + </listitem> + <listitem> + <para> + 651 Jan Tojnar + </para> + </listitem> + <listitem> + <para> + 622 Daniël de Kok + </para> + </listitem> + <listitem> + <para> + 605 WORLDofPEACE + </para> + </listitem> + <listitem> + <para> + 597 Florian Klink + </para> + </listitem> + <listitem> + <para> + 528 José Romildo Malaquias + </para> + </listitem> + <listitem> + <para> + 281 volth + </para> + </listitem> + <listitem> + <para> + 101 Robert Scott + </para> + </listitem> + <listitem> + <para> + 86 Tim Steinbach + </para> + </listitem> + <listitem> + <para> + 76 WORLDofPEACE + </para> + </listitem> + <listitem> + <para> + 49 Maximilian Bosch + </para> + </listitem> + <listitem> + <para> + 42 Thomas Tuegel + </para> + </listitem> + <listitem> + <para> + 37 Doron Behar + </para> + </listitem> + <listitem> + <para> + 36 Vladimír Čunát + </para> + </listitem> + <listitem> + <para> + 27 Jonathan Ringer + </para> + </listitem> + <listitem> + <para> + 27 Maciej Krüger + </para> + </listitem> + </orderedlist> + <para> + I, Jonathan Ringer, would also like to personally thank + @WORLDofPEACE for their help in mentoring me on the release + process. Special thanks also goes to Thomas Tuegel for helping + immensely with stabilizing Qt, KDE, and Plasma5; I would also like + to thank Robert Scott for his numerous fixes and pull request + reviews. + </para> + </section> +</section> diff --git a/nixos/doc/manual/from_md/release-notes/rl-2111.section.xml b/nixos/doc/manual/from_md/release-notes/rl-2111.section.xml index 2c7935078e3..8a3c982fcb9 100644 --- a/nixos/doc/manual/from_md/release-notes/rl-2111.section.xml +++ b/nixos/doc/manual/from_md/release-notes/rl-2111.section.xml @@ -309,6 +309,8 @@ </listitem> </itemizedlist> </listitem> + </itemizedlist> + <itemizedlist spacing="compact"> <listitem> <para> The <literal>antlr</literal> package now defaults to the 4.x diff --git a/nixos/doc/manual/release-notes/release-notes.xml b/nixos/doc/manual/release-notes/release-notes.xml index 6d7899f6dcd..c6fff3c30d5 100644 --- a/nixos/doc/manual/release-notes/release-notes.xml +++ b/nixos/doc/manual/release-notes/release-notes.xml @@ -10,18 +10,18 @@ </para> <xi:include href="../from_md/release-notes/rl-2111.section.xml" /> <xi:include href="rl-2105.xml" /> - <xi:include href="rl-2009.xml" /> - <xi:include href="rl-2003.xml" /> - <xi:include href="rl-1909.xml" /> - <xi:include href="rl-1903.xml" /> - <xi:include href="rl-1809.xml" /> - <xi:include href="rl-1803.xml" /> - <xi:include href="rl-1709.xml" /> - <xi:include href="rl-1703.xml" /> - <xi:include href="rl-1609.xml" /> - <xi:include href="rl-1603.xml" /> - <xi:include href="rl-1509.xml" /> - <xi:include href="rl-1412.xml" /> - <xi:include href="rl-1404.xml" /> - <xi:include href="rl-1310.xml" /> + <xi:include href="../from_md/release-notes/rl-2009.section.xml" /> + <xi:include href="../from_md/release-notes/rl-2003.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1909.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1903.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1809.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1803.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1709.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1703.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1609.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1603.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1509.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1412.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1404.section.xml" /> + <xi:include href="../from_md/release-notes/rl-1310.section.xml" /> </appendix> diff --git a/nixos/doc/manual/release-notes/rl-1310.section.md b/nixos/doc/manual/release-notes/rl-1310.section.md new file mode 100644 index 00000000000..9efd8f6e8a1 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1310.section.md @@ -0,0 +1,3 @@ +# Release 13.10 ("Aardvark", 2013/10/31) {#sec-release-13.10} + +This is the first stable release branch of NixOS. diff --git a/nixos/doc/manual/release-notes/rl-1310.xml b/nixos/doc/manual/release-notes/rl-1310.xml deleted file mode 100644 index 248bab70c36..00000000000 --- a/nixos/doc/manual/release-notes/rl-1310.xml +++ /dev/null @@ -1,11 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-13.10"> - <title>Release 13.10 (“Aardvark”, 2013/10/31)</title> - - <para> - This is the first stable release branch of NixOS. - </para> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1404.section.md b/nixos/doc/manual/release-notes/rl-1404.section.md new file mode 100644 index 00000000000..e0a70df3a63 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1404.section.md @@ -0,0 +1,81 @@ +# Release 14.04 ("Baboon", 2014/04/30) {#sec-release-14.04} + +This is the second stable release branch of NixOS. In addition to numerous new and upgraded packages and modules, this release has the following highlights: + +- Installation on UEFI systems is now supported. See [](#sec-installation) for details. + +- Systemd has been updated to version 212, which has [numerous improvements](http://cgit.freedesktop.org/systemd/systemd/plain/NEWS?id=v212). NixOS now automatically starts systemd user instances when you log in. You can define global user units through the `systemd.unit.*` options. + +- NixOS is now based on Glibc 2.19 and GCC 4.8. + +- The default Linux kernel has been updated to 3.12. + +- KDE has been updated to 4.12. + +- GNOME 3.10 experimental support has been added. + +- Nix has been updated to 1.7 ([details](https://nixos.org/nix/manual/#ssec-relnotes-1.7)). + +- NixOS now supports fully declarative management of users and groups. If you set `users.mutableUsers` to `false`, then the contents of `/etc/passwd` and `/etc/group` will be [congruent](https://www.usenix.org/legacy/event/lisa02/tech/full_papers/traugott/traugott_html/) to your NixOS configuration. For instance, if you remove a user from `users.extraUsers` and run `nixos-rebuild`, the user account will cease to exist. Also, imperative commands for managing users and groups, such as `useradd`, are no longer available. If `users.mutableUsers` is `true` (the default), then behaviour is unchanged from NixOS 13.10. + +- NixOS now has basic container support, meaning you can easily run a NixOS instance as a container in a NixOS host system. These containers are suitable for testing and experimentation but not production use, since they're not fully isolated from the host. See [](#ch-containers) for details. + +- Systemd units provided by packages can now be overridden from the NixOS configuration. For instance, if a package `foo` provides systemd units, you can say: + + ```nix + { + systemd.packages = [ pkgs.foo ]; + } + ``` + + to enable those units. You can then set or override unit options in the usual way, e.g. + + ```nix + { + systemd.services.foo.wantedBy = [ "multi-user.target" ]; + systemd.services.foo.serviceConfig.MemoryLimit = "512M"; + } + ``` + + When upgrading from a previous release, please be aware of the following incompatible changes: + +- Nixpkgs no longer exposes unfree packages by default. If your NixOS configuration requires unfree packages from Nixpkgs, you need to enable support for them explicitly by setting: + + ```nix + { + nixpkgs.config.allowUnfree = true; + } + ``` + + Otherwise, you get an error message such as: + + ```ShellSession + error: package ‘nvidia-x11-331.49-3.12.17’ in ‘…/nvidia-x11/default.nix:56’ + has an unfree license, refusing to evaluate + ``` + +- The Adobe Flash player is no longer enabled by default in the Firefox and Chromium wrappers. To enable it, you must set: + + ```nix + { + nixpkgs.config.allowUnfree = true; + nixpkgs.config.firefox.enableAdobeFlash = true; # for Firefox + nixpkgs.config.chromium.enableAdobeFlash = true; # for Chromium + } + ``` + +- The firewall is now enabled by default. If you don't want this, you need to disable it explicitly: + + ```nix + { + networking.firewall.enable = false; + } + ``` + +- The option `boot.loader.grub.memtest86` has been renamed to `boot.loader.grub.memtest86.enable`. + +- The `mysql55` service has been merged into the `mysql` service, which no longer sets a default for the option `services.mysql.package`. + +- Package variants are now differentiated by suffixing the name, rather than the version. For instance, `sqlite-3.8.4.3-interactive` is now called `sqlite-interactive-3.8.4.3`. This ensures that `nix-env -i sqlite` is unambiguous, and that `nix-env -u` won't "upgrade" `sqlite` to `sqlite-interactive` or vice versa. Notably, this change affects the Firefox wrapper (which provides plugins), as it is now called `firefox-wrapper`. So when using `nix-env`, you should do `nix-env -e firefox; nix-env -i firefox-wrapper` if you want to keep using the wrapper. This change does not affect declarative package management, since attribute names like `pkgs.firefoxWrapper` were already unambiguous. + +- The symlink `/etc/ca-bundle.crt` is gone. Programs should instead use the environment variable `OPENSSL_X509_CERT_FILE` (which points to `/etc/ssl/certs/ca-bundle.crt`). diff --git a/nixos/doc/manual/release-notes/rl-1404.xml b/nixos/doc/manual/release-notes/rl-1404.xml deleted file mode 100644 index 56dbb74a71d..00000000000 --- a/nixos/doc/manual/release-notes/rl-1404.xml +++ /dev/null @@ -1,179 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-14.04"> - <title>Release 14.04 (“Baboon”, 2014/04/30)</title> - - <para> - This is the second stable release branch of NixOS. In addition to numerous - new and upgraded packages and modules, this release has the following - highlights: - <itemizedlist> - <listitem> - <para> - Installation on UEFI systems is now supported. See - <xref linkend="sec-installation"/> for details. - </para> - </listitem> - <listitem> - <para> - Systemd has been updated to version 212, which has - <link xlink:href="http://cgit.freedesktop.org/systemd/systemd/plain/NEWS?id=v212">numerous - improvements</link>. NixOS now automatically starts systemd user instances - when you log in. You can define global user units through the - <option>systemd.unit.*</option> options. - </para> - </listitem> - <listitem> - <para> - NixOS is now based on Glibc 2.19 and GCC 4.8. - </para> - </listitem> - <listitem> - <para> - The default Linux kernel has been updated to 3.12. - </para> - </listitem> - <listitem> - <para> - KDE has been updated to 4.12. - </para> - </listitem> - <listitem> - <para> - GNOME 3.10 experimental support has been added. - </para> - </listitem> - <listitem> - <para> - Nix has been updated to 1.7 - (<link - xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-1.7">details</link>). - </para> - </listitem> - <listitem> - <para> - NixOS now supports fully declarative management of users and groups. If - you set <option>users.mutableUsers</option> to <literal>false</literal>, - then the contents of <filename>/etc/passwd</filename> and - <filename>/etc/group</filename> will be - <link - xlink:href="https://www.usenix.org/legacy/event/lisa02/tech/full_papers/traugott/traugott_html/">congruent</link> - to your NixOS configuration. For instance, if you remove a user from - <option>users.extraUsers</option> and run - <command>nixos-rebuild</command>, the user account will cease to exist. - Also, imperative commands for managing users and groups, such as - <command>useradd</command>, are no longer available. If - <option>users.mutableUsers</option> is <literal>true</literal> (the - default), then behaviour is unchanged from NixOS 13.10. - </para> - </listitem> - <listitem> - <para> - NixOS now has basic container support, meaning you can easily run a NixOS - instance as a container in a NixOS host system. These containers are - suitable for testing and experimentation but not production use, since - they’re not fully isolated from the host. See - <xref linkend="ch-containers"/> for details. - </para> - </listitem> - <listitem> - <para> - Systemd units provided by packages can now be overridden from the NixOS - configuration. For instance, if a package <literal>foo</literal> provides - systemd units, you can say: -<programlisting> -systemd.packages = [ pkgs.foo ]; -</programlisting> - to enable those units. You can then set or override unit options in the - usual way, e.g. -<programlisting> -systemd.services.foo.wantedBy = [ "multi-user.target" ]; -systemd.services.foo.serviceConfig.MemoryLimit = "512M"; -</programlisting> - </para> - </listitem> - </itemizedlist> - </para> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - <itemizedlist> - <listitem> - <para> - Nixpkgs no longer exposes unfree packages by default. If your NixOS - configuration requires unfree packages from Nixpkgs, you need to enable - support for them explicitly by setting: -<programlisting> -nixpkgs.config.allowUnfree = true; -</programlisting> - Otherwise, you get an error message such as: -<screen> -error: package ‘nvidia-x11-331.49-3.12.17’ in ‘…/nvidia-x11/default.nix:56’ - has an unfree license, refusing to evaluate -</screen> - </para> - </listitem> - <listitem> - <para> - The Adobe Flash player is no longer enabled by default in the Firefox and - Chromium wrappers. To enable it, you must set: -<programlisting> -nixpkgs.config.allowUnfree = true; -nixpkgs.config.firefox.enableAdobeFlash = true; # for Firefox -nixpkgs.config.chromium.enableAdobeFlash = true; # for Chromium -</programlisting> - </para> - </listitem> - <listitem> - <para> - The firewall is now enabled by default. If you don’t want this, you need - to disable it explicitly: -<programlisting> -networking.firewall.enable = false; -</programlisting> - </para> - </listitem> - <listitem> - <para> - The option <option>boot.loader.grub.memtest86</option> has been renamed to - <option>boot.loader.grub.memtest86.enable</option>. - </para> - </listitem> - <listitem> - <para> - The <literal>mysql55</literal> service has been merged into the - <literal>mysql</literal> service, which no longer sets a default for the - option <option>services.mysql.package</option>. - </para> - </listitem> - <listitem> - <para> - Package variants are now differentiated by suffixing the name, rather than - the version. For instance, <filename>sqlite-3.8.4.3-interactive</filename> - is now called <filename>sqlite-interactive-3.8.4.3</filename>. This - ensures that <literal>nix-env -i sqlite</literal> is unambiguous, and that - <literal>nix-env -u</literal> won’t “upgrade” - <literal>sqlite</literal> to <literal>sqlite-interactive</literal> or vice - versa. Notably, this change affects the Firefox wrapper (which provides - plugins), as it is now called <literal>firefox-wrapper</literal>. So when - using <command>nix-env</command>, you should do <literal>nix-env -e - firefox; nix-env -i firefox-wrapper</literal> if you want to keep using - the wrapper. This change does not affect declarative package management, - since attribute names like <literal>pkgs.firefoxWrapper</literal> were - already unambiguous. - </para> - </listitem> - <listitem> - <para> - The symlink <filename>/etc/ca-bundle.crt</filename> is gone. Programs - should instead use the environment variable - <envar>OPENSSL_X509_CERT_FILE</envar> (which points to - <filename>/etc/ssl/certs/ca-bundle.crt</filename>). - </para> - </listitem> - </itemizedlist> - </para> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1412.section.md b/nixos/doc/manual/release-notes/rl-1412.section.md new file mode 100644 index 00000000000..683f1e45f09 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1412.section.md @@ -0,0 +1,171 @@ +# Release 14.12 ("Caterpillar", 2014/12/30) {#sec-release-14.12} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- Systemd has been updated to version 217, which has numerous [improvements.](http://lists.freedesktop.org/archives/systemd-devel/2014-October/024662.html) + +- [Nix has been updated to 1.8.](https://www.mail-archive.com/nix-dev@lists.science.uu.nl/msg13957.html) + +- NixOS is now based on Glibc 2.20. + +- KDE has been updated to 4.14. + +- The default Linux kernel has been updated to 3.14. + +- If `users.mutableUsers` is enabled (the default), changes made to the declaration of a user or group will be correctly realised when running `nixos-rebuild`. For instance, removing a user specification from `configuration.nix` will cause the actual user account to be deleted. If `users.mutableUsers` is disabled, it is no longer necessary to specify UIDs or GIDs; if omitted, they are allocated dynamically. + +Following new services were added since the last release: + +- `atftpd` + +- `bosun` + +- `bspwm` + +- `chronos` + +- `collectd` + +- `consul` + +- `cpuminer-cryptonight` + +- `crashplan` + +- `dnscrypt-proxy` + +- `docker-registry` + +- `docker` + +- `etcd` + +- `fail2ban` + +- `fcgiwrap` + +- `fleet` + +- `fluxbox` + +- `gdm` + +- `geoclue2` + +- `gitlab` + +- `gitolite` + +- `gnome3.gnome-documents` + +- `gnome3.gnome-online-miners` + +- `gnome3.gvfs` + +- `gnome3.seahorse` + +- `hbase` + +- `i2pd` + +- `influxdb` + +- `kubernetes` + +- `liquidsoap` + +- `lxc` + +- `mailpile` + +- `mesos` + +- `mlmmj` + +- `monetdb` + +- `mopidy` + +- `neo4j` + +- `nsd` + +- `openntpd` + +- `opentsdb` + +- `openvswitch` + +- `parallels-guest` + +- `peerflix` + +- `phd` + +- `polipo` + +- `prosody` + +- `radicale` + +- `redmine` + +- `riemann` + +- `scollector` + +- `seeks` + +- `siproxd` + +- `strongswan` + +- `tcsd` + +- `teamspeak3` + +- `thermald` + +- `torque/mrom` + +- `torque/server` + +- `uhub` + +- `unifi` + +- `znc` + +- `zookeeper` + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- The default version of Apache httpd is now 2.4. If you use the `extraConfig` option to pass literal Apache configuration text, you may need to update it --- see [Apache's documentation](http://httpd.apache.org/docs/2.4/upgrading.html) for details. If you wish to continue to use httpd 2.2, add the following line to your NixOS configuration: + + ```nix + { + services.httpd.package = pkgs.apacheHttpd_2_2; + } + ``` + +- PHP 5.3 has been removed because it is no longer supported by the PHP project. A [migration guide](http://php.net/migration54) is available. + +- The host side of a container virtual Ethernet pair is now called `ve-container-name` rather than `c-container-name`. + +- GNOME 3.10 support has been dropped. The default GNOME version is now 3.12. + +- VirtualBox has been upgraded to 4.3.20 release. Users may be required to run `rm -rf /tmp/.vbox*`. The line `imports = [ <nixpkgs/nixos/modules/programs/virtualbox.nix> ]` is no longer necessary, use `services.virtualboxHost.enable = true` instead. + + Also, hardening mode is now enabled by default, which means that unless you want to use USB support, you no longer need to be a member of the `vboxusers` group. + +- Chromium has been updated to 39.0.2171.65. `enablePepperPDF` is now enabled by default. `chromium*Wrapper` packages no longer exist, because upstream removed NSAPI support. `chromium-stable` has been renamed to `chromium`. + +- Python packaging documentation is now part of nixpkgs manual. To override the python packages available to a custom python you now use `pkgs.pythonFull.buildEnv.override` instead of `pkgs.pythonFull.override`. + +- `boot.resumeDevice = "8:6"` is no longer supported. Most users will want to leave it undefined, which takes the swap partitions automatically. There is an evaluation assertion to ensure that the string starts with a slash. + +- The system-wide default timezone for NixOS installations changed from `CET` to `UTC`. To choose a different timezone for your system, configure `time.timeZone` in `configuration.nix`. A fairly complete list of possible values for that setting is available at <https://en.wikipedia.org/wiki/List_of_tz_database_time_zones>. + +- GNU screen has been updated to 4.2.1, which breaks the ability to connect to sessions created by older versions of screen. + +- The Intel GPU driver was updated to the 3.x prerelease version (used by most distributions) and supports DRI3 now. diff --git a/nixos/doc/manual/release-notes/rl-1412.xml b/nixos/doc/manual/release-notes/rl-1412.xml deleted file mode 100644 index 139f61c2a55..00000000000 --- a/nixos/doc/manual/release-notes/rl-1412.xml +++ /dev/null @@ -1,467 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-14.12"> - <title>Release 14.12 (“Caterpillar”, 2014/12/30)</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - <itemizedlist> - <listitem> - <para> - Systemd has been updated to version 217, which has numerous - <link xlink:href="http://lists.freedesktop.org/archives/systemd-devel/2014-October/024662.html">improvements.</link> - </para> - </listitem> - <listitem> - <para> - <link xlink:href="https://www.mail-archive.com/nix-dev@lists.science.uu.nl/msg13957.html"> - Nix has been updated to 1.8.</link> - </para> - </listitem> - <listitem> - <para> - NixOS is now based on Glibc 2.20. - </para> - </listitem> - <listitem> - <para> - KDE has been updated to 4.14. - </para> - </listitem> - <listitem> - <para> - The default Linux kernel has been updated to 3.14. - </para> - </listitem> - <listitem> - <para> - If <option>users.mutableUsers</option> is enabled (the default), changes - made to the declaration of a user or group will be correctly realised when - running <command>nixos-rebuild</command>. For instance, removing a user - specification from <filename>configuration.nix</filename> will cause the - actual user account to be deleted. If <option>users.mutableUsers</option> - is disabled, it is no longer necessary to specify UIDs or GIDs; if - omitted, they are allocated dynamically. - </para> - </listitem> - </itemizedlist> - </para> - - <para> - Following new services were added since the last release: - <itemizedlist> - <listitem> - <para> - <literal>atftpd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>bosun</literal> - </para> - </listitem> - <listitem> - <para> - <literal>bspwm</literal> - </para> - </listitem> - <listitem> - <para> - <literal>chronos</literal> - </para> - </listitem> - <listitem> - <para> - <literal>collectd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>consul</literal> - </para> - </listitem> - <listitem> - <para> - <literal>cpuminer-cryptonight</literal> - </para> - </listitem> - <listitem> - <para> - <literal>crashplan</literal> - </para> - </listitem> - <listitem> - <para> - <literal>dnscrypt-proxy</literal> - </para> - </listitem> - <listitem> - <para> - <literal>docker-registry</literal> - </para> - </listitem> - <listitem> - <para> - <literal>docker</literal> - </para> - </listitem> - <listitem> - <para> - <literal>etcd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>fail2ban</literal> - </para> - </listitem> - <listitem> - <para> - <literal>fcgiwrap</literal> - </para> - </listitem> - <listitem> - <para> - <literal>fleet</literal> - </para> - </listitem> - <listitem> - <para> - <literal>fluxbox</literal> - </para> - </listitem> - <listitem> - <para> - <literal>gdm</literal> - </para> - </listitem> - <listitem> - <para> - <literal>geoclue2</literal> - </para> - </listitem> - <listitem> - <para> - <literal>gitlab</literal> - </para> - </listitem> - <listitem> - <para> - <literal>gitolite</literal> - </para> - </listitem> - <listitem> - <para> - <literal>gnome3.gnome-documents</literal> - </para> - </listitem> - <listitem> - <para> - <literal>gnome3.gnome-online-miners</literal> - </para> - </listitem> - <listitem> - <para> - <literal>gnome3.gvfs</literal> - </para> - </listitem> - <listitem> - <para> - <literal>gnome3.seahorse</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hbase</literal> - </para> - </listitem> - <listitem> - <para> - <literal>i2pd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>influxdb</literal> - </para> - </listitem> - <listitem> - <para> - <literal>kubernetes</literal> - </para> - </listitem> - <listitem> - <para> - <literal>liquidsoap</literal> - </para> - </listitem> - <listitem> - <para> - <literal>lxc</literal> - </para> - </listitem> - <listitem> - <para> - <literal>mailpile</literal> - </para> - </listitem> - <listitem> - <para> - <literal>mesos</literal> - </para> - </listitem> - <listitem> - <para> - <literal>mlmmj</literal> - </para> - </listitem> - <listitem> - <para> - <literal>monetdb</literal> - </para> - </listitem> - <listitem> - <para> - <literal>mopidy</literal> - </para> - </listitem> - <listitem> - <para> - <literal>neo4j</literal> - </para> - </listitem> - <listitem> - <para> - <literal>nsd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>openntpd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>opentsdb</literal> - </para> - </listitem> - <listitem> - <para> - <literal>openvswitch</literal> - </para> - </listitem> - <listitem> - <para> - <literal>parallels-guest</literal> - </para> - </listitem> - <listitem> - <para> - <literal>peerflix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>phd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>polipo</literal> - </para> - </listitem> - <listitem> - <para> - <literal>prosody</literal> - </para> - </listitem> - <listitem> - <para> - <literal>radicale</literal> - </para> - </listitem> - <listitem> - <para> - <literal>redmine</literal> - </para> - </listitem> - <listitem> - <para> - <literal>riemann</literal> - </para> - </listitem> - <listitem> - <para> - <literal>scollector</literal> - </para> - </listitem> - <listitem> - <para> - <literal>seeks</literal> - </para> - </listitem> - <listitem> - <para> - <literal>siproxd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>strongswan</literal> - </para> - </listitem> - <listitem> - <para> - <literal>tcsd</literal> - </para> - </listitem> - <listitem> - <para> - <literal>teamspeak3</literal> - </para> - </listitem> - <listitem> - <para> - <literal>thermald</literal> - </para> - </listitem> - <listitem> - <para> - <literal>torque/mrom</literal> - </para> - </listitem> - <listitem> - <para> - <literal>torque/server</literal> - </para> - </listitem> - <listitem> - <para> - <literal>uhub</literal> - </para> - </listitem> - <listitem> - <para> - <literal>unifi</literal> - </para> - </listitem> - <listitem> - <para> - <literal>znc</literal> - </para> - </listitem> - <listitem> - <para> - <literal>zookeeper</literal> - </para> - </listitem> - </itemizedlist> - </para> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - <itemizedlist> - <listitem> - <para> - The default version of Apache httpd is now 2.4. If you use the - <option>extraConfig</option> option to pass literal Apache configuration - text, you may need to update it — see - <link -xlink:href="http://httpd.apache.org/docs/2.4/upgrading.html">Apache’s - documentation</link> for details. If you wish to continue to use httpd - 2.2, add the following line to your NixOS configuration: -<programlisting> -services.httpd.package = pkgs.apacheHttpd_2_2; -</programlisting> - </para> - </listitem> - <listitem> - <para> - PHP 5.3 has been removed because it is no longer supported by the PHP - project. A <link -xlink:href="http://php.net/migration54">migration - guide</link> is available. - </para> - </listitem> - <listitem> - <para> - The host side of a container virtual Ethernet pair is now called - <literal>ve-<replaceable>container-name</replaceable></literal> rather - than <literal>c-<replaceable>container-name</replaceable></literal>. - </para> - </listitem> - <listitem> - <para> - GNOME 3.10 support has been dropped. The default GNOME version is now - 3.12. - </para> - </listitem> - <listitem> - <para> - VirtualBox has been upgraded to 4.3.20 release. Users may be required to - run <command>rm -rf /tmp/.vbox*</command>. The line <literal>imports = [ - <nixpkgs/nixos/modules/programs/virtualbox.nix> ]</literal> is no - longer necessary, use <literal>services.virtualboxHost.enable = - true</literal> instead. - </para> - <para> - Also, hardening mode is now enabled by default, which means that unless - you want to use USB support, you no longer need to be a member of the - <literal>vboxusers</literal> group. - </para> - </listitem> - <listitem> - <para> - Chromium has been updated to 39.0.2171.65. - <option>enablePepperPDF</option> is now enabled by default. - <literal>chromium*Wrapper</literal> packages no longer exist, because - upstream removed NSAPI support. <literal>chromium-stable</literal> has - been renamed to <literal>chromium</literal>. - </para> - </listitem> - <listitem> - <para> - Python packaging documentation is now part of nixpkgs manual. To override - the python packages available to a custom python you now use - <literal>pkgs.pythonFull.buildEnv.override</literal> instead of - <literal>pkgs.pythonFull.override</literal>. - </para> - </listitem> - <listitem> - <para> - <literal>boot.resumeDevice = "8:6"</literal> is no longer supported. Most - users will want to leave it undefined, which takes the swap partitions - automatically. There is an evaluation assertion to ensure that the string - starts with a slash. - </para> - </listitem> - <listitem> - <para> - The system-wide default timezone for NixOS installations changed from - <literal>CET</literal> to <literal>UTC</literal>. To choose a different - timezone for your system, configure <literal>time.timeZone</literal> in - <literal>configuration.nix</literal>. A fairly complete list of possible - values for that setting is available at - <link -xlink:href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones"/>. - </para> - </listitem> - <listitem> - <para> - GNU screen has been updated to 4.2.1, which breaks the ability to connect - to sessions created by older versions of screen. - </para> - </listitem> - <listitem> - <para> - The Intel GPU driver was updated to the 3.x prerelease version (used by - most distributions) and supports DRI3 now. - </para> - </listitem> - </itemizedlist> - </para> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1509.section.md b/nixos/doc/manual/release-notes/rl-1509.section.md new file mode 100644 index 00000000000..55804ddb988 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1509.section.md @@ -0,0 +1,319 @@ +# Release 15.09 ("Dingo", 2015/09/30) {#sec-release-15.09} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- The [Haskell](http://haskell.org/) packages infrastructure has been re-designed from the ground up (\"Haskell NG\"). NixOS now distributes the latest version of every single package registered on [Hackage](http://hackage.haskell.org/) \-- well in excess of 8,000 Haskell packages. Detailed instructions on how to use that infrastructure can be found in the [User\'s Guide to the Haskell Infrastructure](https://nixos.org/nixpkgs/manual/#users-guide-to-the-haskell-infrastructure). Users migrating from an earlier release may find helpful information below, in the list of backwards-incompatible changes. Furthermore, we distribute 51(!) additional Haskell package sets that provide every single [LTS Haskell](http://www.stackage.org/) release since version 0.0 as well as the most recent [Stackage Nightly](http://www.stackage.org/) snapshot. The announcement [\"Full Stackage Support in Nixpkgs\"](https://nixos.org/nix-dev/2015-September/018138.html) gives additional details. + +- Nix has been updated to version 1.10, which among other improvements enables cryptographic signatures on binary caches for improved security. + +- You can now keep your NixOS system up to date automatically by setting + +```nix +{ + system.autoUpgrade.enable = true; +} +``` + +This will cause the system to periodically check for updates in your current channel and run `nixos-rebuild`. + +- This release is based on Glibc 2.21, GCC 4.9 and Linux 3.18. + +- GNOME has been upgraded to 3.16. + +- Xfce has been upgraded to 4.12. + +- KDE 5 has been upgraded to KDE Frameworks 5.10, Plasma 5.3.2 and Applications 15.04.3. KDE 4 has been updated to kdelibs-4.14.10. + +- E19 has been upgraded to 0.16.8.15. + +The following new services were added since the last release: + +- `services/mail/exim.nix` + +- `services/misc/apache-kafka.nix` + +- `services/misc/canto-daemon.nix` + +- `services/misc/confd.nix` + +- `services/misc/devmon.nix` + +- `services/misc/gitit.nix` + +- `services/misc/ihaskell.nix` + +- `services/misc/mbpfan.nix` + +- `services/misc/mediatomb.nix` + +- `services/misc/mwlib.nix` + +- `services/misc/parsoid.nix` + +- `services/misc/plex.nix` + +- `services/misc/ripple-rest.nix` + +- `services/misc/ripple-data-api.nix` + +- `services/misc/subsonic.nix` + +- `services/misc/sundtek.nix` + +- `services/monitoring/cadvisor.nix` + +- `services/monitoring/das_watchdog.nix` + +- `services/monitoring/grafana.nix` + +- `services/monitoring/riemann-tools.nix` + +- `services/monitoring/teamviewer.nix` + +- `services/network-filesystems/u9fs.nix` + +- `services/networking/aiccu.nix` + +- `services/networking/asterisk.nix` + +- `services/networking/bird.nix` + +- `services/networking/charybdis.nix` + +- `services/networking/docker-registry-server.nix` + +- `services/networking/fan.nix` + +- `services/networking/firefox/sync-server.nix` + +- `services/networking/gateone.nix` + +- `services/networking/heyefi.nix` + +- `services/networking/i2p.nix` + +- `services/networking/lambdabot.nix` + +- `services/networking/mstpd.nix` + +- `services/networking/nix-serve.nix` + +- `services/networking/nylon.nix` + +- `services/networking/racoon.nix` + +- `services/networking/skydns.nix` + +- `services/networking/shout.nix` + +- `services/networking/softether.nix` + +- `services/networking/sslh.nix` + +- `services/networking/tinc.nix` + +- `services/networking/tlsdated.nix` + +- `services/networking/tox-bootstrapd.nix` + +- `services/networking/tvheadend.nix` + +- `services/networking/zerotierone.nix` + +- `services/scheduling/marathon.nix` + +- `services/security/fprintd.nix` + +- `services/security/hologram.nix` + +- `services/security/munge.nix` + +- `services/system/cloud-init.nix` + +- `services/web-servers/shellinabox.nix` + +- `services/web-servers/uwsgi.nix` + +- `services/x11/unclutter.nix` + +- `services/x11/display-managers/sddm.nix` + +- `system/boot/coredump.nix` + +- `system/boot/loader/loader.nix` + +- `system/boot/loader/generic-extlinux-compatible` + +- `system/boot/networkd.nix` + +- `system/boot/resolved.nix` + +- `system/boot/timesyncd.nix` + +- `tasks/filesystems/exfat.nix` + +- `tasks/filesystems/ntfs.nix` + +- `tasks/filesystems/vboxsf.nix` + +- `virtualisation/virtualbox-host.nix` + +- `virtualisation/vmware-guest.nix` + +- `virtualisation/xen-dom0.nix` + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- `sshd` no longer supports DSA and ECDSA host keys by default. If you have existing systems with such host keys and want to continue to use them, please set + +```nix +{ + system.stateVersion = "14.12"; +} +``` + +The new option `system.stateVersion` ensures that certain configuration changes that could break existing systems (such as the `sshd` host key setting) will maintain compatibility with the specified NixOS release. NixOps sets the state version of existing deployments automatically. + +- `cron` is no longer enabled by default, unless you have a non-empty `services.cron.systemCronJobs`. To force `cron` to be enabled, set `services.cron.enable = true`. + +- Nix now requires binary caches to be cryptographically signed. If you have unsigned binary caches that you want to continue to use, you should set `nix.requireSignedBinaryCaches = false`. + +- Steam now doesn\'t need root rights to work. Instead of using `*-steam-chrootenv`, you should now just run `steam`. `steamChrootEnv` package was renamed to `steam`, and old `steam` package \-- to `steamOriginal`. + +- CMPlayer has been renamed to bomi upstream. Package `cmplayer` was accordingly renamed to `bomi` + +- Atom Shell has been renamed to Electron upstream. Package `atom-shell` was accordingly renamed to `electron` + +- Elm is not released on Hackage anymore. You should now use `elmPackages.elm` which contains the latest Elm platform. + +- The CUPS printing service has been updated to version `2.0.2`. Furthermore its systemd service has been renamed to `cups.service`. + + Local printers are no longer shared or advertised by default. This behavior can be changed by enabling `services.printing.defaultShared` or `services.printing.browsing` respectively. + +- The VirtualBox host and guest options have been named more consistently. They can now found in `virtualisation.virtualbox.host.*` instead of `services.virtualboxHost.*` and `virtualisation.virtualbox.guest.*` instead of `services.virtualboxGuest.*`. + + Also, there now is support for the `vboxsf` file system using the `fileSystems` configuration attribute. An example of how this can be used in a configuration: + +```nix +{ + fileSystems."/shiny" = { + device = "myshinysharedfolder"; + fsType = "vboxsf"; + }; +} +``` + +- \"`nix-env -qa`\" no longer discovers Haskell packages by name. The only packages visible in the global scope are `ghc`, `cabal-install`, and `stack`, but all other packages are hidden. The reason for this inconvenience is the sheer size of the Haskell package set. Name-based lookups are expensive, and most `nix-env -qa` operations would become much slower if we\'d add the entire Hackage database into the top level attribute set. Instead, the list of Haskell packages can be displayed by running: + +```ShellSession +nix-env -f "<nixpkgs>" -qaP -A haskellPackages +``` + +Executable programs written in Haskell can be installed with: + +```ShellSession +nix-env -f "<nixpkgs>" -iA haskellPackages.pandoc +``` + +Installing Haskell _libraries_ this way, however, is no longer supported. See the next item for more details. + +- Previous versions of NixOS came with a feature called `ghc-wrapper`, a small script that allowed GHC to transparently pick up on libraries installed in the user\'s profile. This feature has been deprecated; `ghc-wrapper` was removed from the distribution. The proper way to register Haskell libraries with the compiler now is the `haskellPackages.ghcWithPackages` function. The [User\'s Guide to the Haskell Infrastructure](https://nixos.org/nixpkgs/manual/#users-guide-to-the-haskell-infrastructure) provides more information about this subject. + +- All Haskell builds that have been generated with version 1.x of the `cabal2nix` utility are now invalid and need to be re-generated with a current version of `cabal2nix` to function. The most recent version of this tool can be installed by running `nix-env -i cabal2nix`. + +- The `haskellPackages` set in Nixpkgs used to have a function attribute called `extension` that users could override in their `~/.nixpkgs/config.nix` files to configure additional attributes, etc. That function still exists, but it\'s now called `overrides`. + +- The OpenBLAS library has been updated to version `0.2.14`. Support for the `x86_64-darwin` platform was added. Dynamic architecture detection was enabled; OpenBLAS now selects microarchitecture-optimized routines at runtime, so optimal performance is achieved without the need to rebuild OpenBLAS locally. OpenBLAS has replaced ATLAS in most packages which use an optimized BLAS or LAPACK implementation. + +- The `phpfpm` is now using the default PHP version (`pkgs.php`) instead of PHP 5.4 (`pkgs.php54`). + +- The `locate` service no longer indexes the Nix store by default, preventing packages with potentially numerous versions from cluttering the output. Indexing the store can be activated by setting `services.locate.includeStore = true`. + +- The Nix expression search path (`NIX_PATH`) no longer contains `/etc/nixos/nixpkgs` by default. You can override `NIX_PATH` by setting `nix.nixPath`. + +- Python 2.6 has been marked as broken (as it no longer receives security updates from upstream). + +- Any use of module arguments such as `pkgs` to access library functions, or to define `imports` attributes will now lead to an infinite loop at the time of the evaluation. + + In case of an infinite loop, use the `--show-trace` command line argument and read the line just above the error message. + + ```ShellSession + $ nixos-rebuild build --show-trace + … + while evaluating the module argument `pkgs' in "/etc/nixos/my-module.nix": + infinite recursion encountered + ``` + + Any use of `pkgs.lib`, should be replaced by `lib`, after adding it as argument of the module. The following module + + ```nix + { config, pkgs, ... }: + + with pkgs.lib; + + { + options = { + foo = mkOption { … }; + }; + config = mkIf config.foo { … }; + } + ``` + + should be modified to look like: + + ```nix + { config, pkgs, lib, ... }: + + with lib; + + { + options = { + foo = mkOption { option declaration }; + }; + config = mkIf config.foo { option definition }; + } + ``` + + When `pkgs` is used to download other projects to import their modules, and only in such cases, it should be replaced by `(import <nixpkgs> {})`. The following module + + ```nix + { config, pkgs, ... }: + + let + myProject = pkgs.fetchurl { + src = url; + sha256 = hash; + }; + in + + { + imports = [ "${myProject}/module.nix" ]; + } + ``` + + should be modified to look like: + + ```nix + { config, pkgs, ... }: + + let + myProject = (import <nixpkgs> {}).fetchurl { + src = url; + sha256 = hash; + }; + in + + { + imports = [ "${myProject}/module.nix" ]; + } + ``` + +Other notable improvements: + +- The nixos and nixpkgs channels were unified, so one _can_ use `nix-env -iA nixos.bash` instead of `nix-env -iA nixos.pkgs.bash`. See [the commit](https://github.com/NixOS/nixpkgs/commit/2cd7c1f198) for details. + +- Users running an SSH server who worry about the quality of their `/etc/ssh/moduli` file with respect to the [vulnerabilities discovered in the Diffie-Hellman key exchange](https://stribika.github.io/2015/01/04/secure-secure-shell.html) can now replace OpenSSH\'s default version with one they generated themselves using the new `services.openssh.moduliFile` option. + +- A newly packaged TeX Live 2015 is provided in `pkgs.texlive`, split into 6500 nix packages. For basic user documentation see [the source](https://github.com/NixOS/nixpkgs/blob/release-15.09/pkgs/tools/typesetting/tex/texlive/default.nix#L1). Beware of [an issue](https://github.com/NixOS/nixpkgs/issues/9757) when installing a too large package set. The plan is to deprecate and maybe delete the original TeX packages until the next release. + +- `buildEnv.env` on all Python interpreters is now available for nix-shell interoperability. diff --git a/nixos/doc/manual/release-notes/rl-1509.xml b/nixos/doc/manual/release-notes/rl-1509.xml deleted file mode 100644 index 098c8c5095b..00000000000 --- a/nixos/doc/manual/release-notes/rl-1509.xml +++ /dev/null @@ -1,750 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-15.09"> - <title>Release 15.09 (“Dingo”, 2015/09/30)</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - The <link xlink:href="http://haskell.org/">Haskell</link> packages - infrastructure has been re-designed from the ground up ("Haskell - NG"). NixOS now distributes the latest version of every single package - registered on - <link - xlink:href="http://hackage.haskell.org/">Hackage</link> -- well - in excess of 8,000 Haskell packages. Detailed instructions on how to use - that infrastructure can be found in the - <link - xlink:href="https://nixos.org/nixpkgs/manual/#users-guide-to-the-haskell-infrastructure">User's - Guide to the Haskell Infrastructure</link>. Users migrating from an earlier - release may find helpful information below, in the list of - backwards-incompatible changes. Furthermore, we distribute 51(!) additional - Haskell package sets that provide every single - <link - xlink:href="http://www.stackage.org/">LTS Haskell</link> release - since version 0.0 as well as the most recent - <link - xlink:href="http://www.stackage.org/">Stackage Nightly</link> - snapshot. The announcement - <link - xlink:href="https://nixos.org/nix-dev/2015-September/018138.html">"Full - Stackage Support in Nixpkgs"</link> gives additional details. - </para> - </listitem> - <listitem> - <para> - Nix has been updated to version 1.10, which among other improvements - enables cryptographic signatures on binary caches for improved security. - </para> - </listitem> - <listitem> - <para> - You can now keep your NixOS system up to date automatically by setting -<programlisting> -system.autoUpgrade.enable = true; -</programlisting> - This will cause the system to periodically check for updates in your - current channel and run <command>nixos-rebuild</command>. - </para> - </listitem> - <listitem> - <para> - This release is based on Glibc 2.21, GCC 4.9 and Linux 3.18. - </para> - </listitem> - <listitem> - <para> - GNOME has been upgraded to 3.16. - </para> - </listitem> - <listitem> - <para> - Xfce has been upgraded to 4.12. - </para> - </listitem> - <listitem> - <para> - KDE 5 has been upgraded to KDE Frameworks 5.10, Plasma 5.3.2 and - Applications 15.04.3. KDE 4 has been updated to kdelibs-4.14.10. - </para> - </listitem> - <listitem> - <para> - E19 has been upgraded to 0.16.8.15. - </para> - </listitem> - </itemizedlist> - - <para> - The following new services were added since the last release: - <itemizedlist> - <listitem> - <para> - <literal>services/mail/exim.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/apache-kafka.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/canto-daemon.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/confd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/devmon.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/gitit.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/ihaskell.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/mbpfan.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/mediatomb.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/mwlib.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/parsoid.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/plex.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/ripple-rest.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/ripple-data-api.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/subsonic.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/sundtek.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/cadvisor.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/das_watchdog.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/grafana.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/riemann-tools.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/teamviewer.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/network-filesystems/u9fs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/aiccu.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/asterisk.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/bird.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/charybdis.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/docker-registry-server.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/fan.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/firefox/sync-server.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/gateone.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/heyefi.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/i2p.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/lambdabot.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/mstpd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/nix-serve.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/nylon.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/racoon.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/skydns.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/shout.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/softether.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/sslh.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/tinc.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/tlsdated.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/tox-bootstrapd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/tvheadend.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/zerotierone.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/scheduling/marathon.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/fprintd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/hologram.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/munge.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/system/cloud-init.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-servers/shellinabox.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-servers/uwsgi.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/unclutter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/display-managers/sddm.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/coredump.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/loader/loader.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/loader/generic-extlinux-compatible</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/networkd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/resolved.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/timesyncd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>tasks/filesystems/exfat.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>tasks/filesystems/ntfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>tasks/filesystems/vboxsf.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/virtualbox-host.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/vmware-guest.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/xen-dom0.nix</literal> - </para> - </listitem> - </itemizedlist> - </para> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - <itemizedlist> - <listitem> - <para> - <command>sshd</command> no longer supports DSA and ECDSA host keys by - default. If you have existing systems with such host keys and want to - continue to use them, please set -<programlisting> -system.stateVersion = "14.12"; -</programlisting> - The new option <option>system.stateVersion</option> ensures that certain - configuration changes that could break existing systems (such as the - <command>sshd</command> host key setting) will maintain compatibility with - the specified NixOS release. NixOps sets the state version of existing - deployments automatically. - </para> - </listitem> - <listitem> - <para> - <command>cron</command> is no longer enabled by default, unless you have a - non-empty <option>services.cron.systemCronJobs</option>. To force - <command>cron</command> to be enabled, set <option>services.cron.enable = - true</option>. - </para> - </listitem> - <listitem> - <para> - Nix now requires binary caches to be cryptographically signed. If you have - unsigned binary caches that you want to continue to use, you should set - <option>nix.requireSignedBinaryCaches = false</option>. - </para> - </listitem> - <listitem> - <para> - Steam now doesn't need root rights to work. Instead of using - <literal>*-steam-chrootenv</literal>, you should now just run - <literal>steam</literal>. <literal>steamChrootEnv</literal> package was - renamed to <literal>steam</literal>, and old <literal>steam</literal> - package -- to <literal>steamOriginal</literal>. - </para> - </listitem> - <listitem> - <para> - CMPlayer has been renamed to bomi upstream. Package - <literal>cmplayer</literal> was accordingly renamed to - <literal>bomi</literal> - </para> - </listitem> - <listitem> - <para> - Atom Shell has been renamed to Electron upstream. Package - <literal>atom-shell</literal> was accordingly renamed to - <literal>electron</literal> - </para> - </listitem> - <listitem> - <para> - Elm is not released on Hackage anymore. You should now use - <literal>elmPackages.elm</literal> which contains the latest Elm platform. - </para> - </listitem> - <listitem> - <para> - The CUPS printing service has been updated to version - <literal>2.0.2</literal>. Furthermore its systemd service has been renamed - to <literal>cups.service</literal>. - </para> - <para> - Local printers are no longer shared or advertised by default. This - behavior can be changed by enabling - <option>services.printing.defaultShared</option> or - <option>services.printing.browsing</option> respectively. - </para> - </listitem> - <listitem> - <para> - The VirtualBox host and guest options have been named more consistently. - They can now found in <option>virtualisation.virtualbox.host.*</option> - instead of <option>services.virtualboxHost.*</option> and - <option>virtualisation.virtualbox.guest.*</option> instead of - <option>services.virtualboxGuest.*</option>. - </para> - <para> - Also, there now is support for the <literal>vboxsf</literal> file system - using the <option>fileSystems</option> configuration attribute. An example - of how this can be used in a configuration: -<programlisting> -fileSystems."/shiny" = { - device = "myshinysharedfolder"; - fsType = "vboxsf"; -}; -</programlisting> - </para> - </listitem> - <listitem> - <para> - "<literal>nix-env -qa</literal>" no longer discovers Haskell - packages by name. The only packages visible in the global scope are - <literal>ghc</literal>, <literal>cabal-install</literal>, and - <literal>stack</literal>, but all other packages are hidden. The reason - for this inconvenience is the sheer size of the Haskell package set. - Name-based lookups are expensive, and most <literal>nix-env -qa</literal> - operations would become much slower if we'd add the entire Hackage - database into the top level attribute set. Instead, the list of Haskell - packages can be displayed by running: - </para> -<programlisting> -nix-env -f "<nixpkgs>" -qaP -A haskellPackages -</programlisting> - <para> - Executable programs written in Haskell can be installed with: - </para> -<programlisting> -nix-env -f "<nixpkgs>" -iA haskellPackages.pandoc -</programlisting> - <para> - Installing Haskell <emphasis>libraries</emphasis> this way, however, is no - longer supported. See the next item for more details. - </para> - </listitem> - <listitem> - <para> - Previous versions of NixOS came with a feature called - <literal>ghc-wrapper</literal>, a small script that allowed GHC to - transparently pick up on libraries installed in the user's profile. This - feature has been deprecated; <literal>ghc-wrapper</literal> was removed - from the distribution. The proper way to register Haskell libraries with - the compiler now is the <literal>haskellPackages.ghcWithPackages</literal> - function. The - <link - xlink:href="https://nixos.org/nixpkgs/manual/#users-guide-to-the-haskell-infrastructure">User's - Guide to the Haskell Infrastructure</link> provides more information about - this subject. - </para> - </listitem> - <listitem> - <para> - All Haskell builds that have been generated with version 1.x of the - <literal>cabal2nix</literal> utility are now invalid and need to be - re-generated with a current version of <literal>cabal2nix</literal> to - function. The most recent version of this tool can be installed by running - <literal>nix-env -i cabal2nix</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>haskellPackages</literal> set in Nixpkgs used to have a - function attribute called <literal>extension</literal> that users could - override in their <literal>~/.nixpkgs/config.nix</literal> files to - configure additional attributes, etc. That function still exists, but it's - now called <literal>overrides</literal>. - </para> - </listitem> - <listitem> - <para> - The OpenBLAS library has been updated to version - <literal>0.2.14</literal>. Support for the - <literal>x86_64-darwin</literal> platform was added. Dynamic architecture - detection was enabled; OpenBLAS now selects microarchitecture-optimized - routines at runtime, so optimal performance is achieved without the need - to rebuild OpenBLAS locally. OpenBLAS has replaced ATLAS in most packages - which use an optimized BLAS or LAPACK implementation. - </para> - </listitem> - <listitem> - <para> - The <literal>phpfpm</literal> is now using the default PHP version - (<literal>pkgs.php</literal>) instead of PHP 5.4 - (<literal>pkgs.php54</literal>). - </para> - </listitem> - <listitem> - <para> - The <literal>locate</literal> service no longer indexes the Nix store by - default, preventing packages with potentially numerous versions from - cluttering the output. Indexing the store can be activated by setting - <option>services.locate.includeStore = true</option>. - </para> - </listitem> - <listitem> - <para> - The Nix expression search path (<envar>NIX_PATH</envar>) no longer - contains <filename>/etc/nixos/nixpkgs</filename> by default. You can - override <envar>NIX_PATH</envar> by setting <option>nix.nixPath</option>. - </para> - </listitem> - <listitem> - <para> - Python 2.6 has been marked as broken (as it no longer receives security - updates from upstream). - </para> - </listitem> - <listitem> - <para> - Any use of module arguments such as <varname>pkgs</varname> to access - library functions, or to define <literal>imports</literal> attributes will - now lead to an infinite loop at the time of the evaluation. - </para> - <para> - In case of an infinite loop, use the <command>--show-trace</command> - command line argument and read the line just above the error message. -<screen> -<prompt>$ </prompt>nixos-rebuild build --show-trace -… -while evaluating the module argument `pkgs' in "/etc/nixos/my-module.nix": -infinite recursion encountered -</screen> - </para> - <para> - Any use of <literal>pkgs.lib</literal>, should be replaced by - <varname>lib</varname>, after adding it as argument of the module. The - following module -<programlisting> -{ config, pkgs, ... }: - -with pkgs.lib; - -{ - options = { - foo = mkOption { … }; - }; - config = mkIf config.foo { … }; -} -</programlisting> - should be modified to look like: -<programlisting> -{ config, pkgs, lib, ... }: - -with lib; - -{ - options = { - foo = mkOption { <replaceable>option declaration</replaceable> }; - }; - config = mkIf config.foo { <replaceable>option definition</replaceable> }; -} -</programlisting> - </para> - <para> - When <varname>pkgs</varname> is used to download other projects to import - their modules, and only in such cases, it should be replaced by - <literal>(import <nixpkgs> {})</literal>. The following module -<programlisting> -{ config, pkgs, ... }: - -let - myProject = pkgs.fetchurl { - src = <replaceable>url</replaceable>; - sha256 = <replaceable>hash</replaceable>; - }; -in - -{ - imports = [ "${myProject}/module.nix" ]; -} -</programlisting> - should be modified to look like: -<programlisting> -{ config, pkgs, ... }: - -let - myProject = (import <nixpkgs> {}).fetchurl { - src = <replaceable>url</replaceable>; - sha256 = <replaceable>hash</replaceable>; - }; -in - -{ - imports = [ "${myProject}/module.nix" ]; -} -</programlisting> - </para> - </listitem> - </itemizedlist> - </para> - - <para> - Other notable improvements: - <itemizedlist> - <listitem> - <para> - The nixos and nixpkgs channels were unified, so one - <emphasis>can</emphasis> use <literal>nix-env -iA nixos.bash</literal> - instead of <literal>nix-env -iA nixos.pkgs.bash</literal>. See - <link xlink:href="https://github.com/NixOS/nixpkgs/commit/2cd7c1f198">the - commit</link> for details. - </para> - </listitem> - <listitem> - <para> - Users running an SSH server who worry about the quality of their - <literal>/etc/ssh/moduli</literal> file with respect to the - <link - xlink:href="https://stribika.github.io/2015/01/04/secure-secure-shell.html">vulnerabilities - discovered in the Diffie-Hellman key exchange</link> can now replace - OpenSSH's default version with one they generated themselves using the new - <option>services.openssh.moduliFile</option> option. - </para> - </listitem> - <listitem> - <para> - A newly packaged TeX Live 2015 is provided in - <literal>pkgs.texlive</literal>, split into 6500 nix packages. For basic - user documentation see - <link xlink:href="https://github.com/NixOS/nixpkgs/blob/release-15.09/pkgs/tools/typesetting/tex/texlive/default.nix#L1" - >the - source</link>. Beware of - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/9757" - >an - issue</link> when installing a too large package set. The plan is to - deprecate and maybe delete the original TeX packages until the next - release. - </para> - </listitem> - <listitem> - <para> - <option>buildEnv.env</option> on all Python interpreters is now available - for nix-shell interoperability. - </para> - </listitem> - </itemizedlist> - </para> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1603.section.md b/nixos/doc/manual/release-notes/rl-1603.section.md new file mode 100644 index 00000000000..dce879ec16d --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1603.section.md @@ -0,0 +1,282 @@ +# Release 16.03 ("Emu", 2016/03/31) {#sec-release-16.03} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- Systemd 229, bringing [numerous improvements](https://github.com/systemd/systemd/blob/v229/NEWS) over 217. + +- Linux 4.4 (was 3.18). + +- GCC 5.3 (was 4.9). Note that GCC 5 [changes the C++ ABI in an incompatible way](https://gcc.gnu.org/onlinedocs/libstdc++/manual/using_dual_abi.html); this may cause problems if you try to link objects compiled with different versions of GCC. + +- Glibc 2.23 (was 2.21). + +- Binutils 2.26 (was 2.23.1). See \#909 + +- Improved support for ensuring [bitwise reproducible builds](https://reproducible-builds.org/). For example, `stdenv` now sets the environment variable `SOURCE_DATE_EPOCH` to a deterministic value, and Nix has [gained an option](https://nixos.org/nix/manual/#ssec-relnotes-1.11) to repeat a build a number of times to test determinism. An ongoing project, the goal of exact reproducibility is to allow binaries to be verified independently (e.g., a user might only trust binaries that appear in three independent binary caches). + +- Perl 5.22. + +The following new services were added since the last release: + +- `services/monitoring/longview.nix` + +- `hardware/video/webcam/facetimehd.nix` + +- `i18n/input-method/default.nix` + +- `i18n/input-method/fcitx.nix` + +- `i18n/input-method/ibus.nix` + +- `i18n/input-method/nabi.nix` + +- `i18n/input-method/uim.nix` + +- `programs/fish.nix` + +- `security/acme.nix` + +- `security/audit.nix` + +- `security/oath.nix` + +- `services/hardware/irqbalance.nix` + +- `services/mail/dspam.nix` + +- `services/mail/opendkim.nix` + +- `services/mail/postsrsd.nix` + +- `services/mail/rspamd.nix` + +- `services/mail/rmilter.nix` + +- `services/misc/autofs.nix` + +- `services/misc/bepasty.nix` + +- `services/misc/calibre-server.nix` + +- `services/misc/cfdyndns.nix` + +- `services/misc/gammu-smsd.nix` + +- `services/misc/mathics.nix` + +- `services/misc/matrix-synapse.nix` + +- `services/misc/octoprint.nix` + +- `services/monitoring/hdaps.nix` + +- `services/monitoring/heapster.nix` + +- `services/monitoring/longview.nix` + +- `services/network-filesystems/netatalk.nix` + +- `services/network-filesystems/xtreemfs.nix` + +- `services/networking/autossh.nix` + +- `services/networking/dnschain.nix` + +- `services/networking/gale.nix` + +- `services/networking/miniupnpd.nix` + +- `services/networking/namecoind.nix` + +- `services/networking/ostinato.nix` + +- `services/networking/pdnsd.nix` + +- `services/networking/shairport-sync.nix` + +- `services/networking/supplicant.nix` + +- `services/search/kibana.nix` + +- `services/security/haka.nix` + +- `services/security/physlock.nix` + +- `services/web-apps/pump.io.nix` + +- `services/x11/hardware/libinput.nix` + +- `services/x11/window-managers/windowlab.nix` + +- `system/boot/initrd-network.nix` + +- `system/boot/initrd-ssh.nix` + +- `system/boot/loader/loader.nix` + +- `system/boot/networkd.nix` + +- `system/boot/resolved.nix` + +- `virtualisation/lxd.nix` + +- `virtualisation/rkt.nix` + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- We no longer produce graphical ISO images and VirtualBox images for `i686-linux`. A minimal ISO image is still provided. + +- Firefox and similar browsers are now _wrapped by default_. The package and attribute names are plain `firefox` or `midori`, etc. Backward-compatibility attributes were set up, but note that `nix-env -u` will _not_ update your current `firefox-with-plugins`; you have to uninstall it and install `firefox` instead. + +- `wmiiSnap` has been replaced with `wmii_hg`, but `services.xserver.windowManager.wmii.enable` has been updated respectively so this only affects you if you have explicitly installed `wmiiSnap`. + +- `jobs` NixOS option has been removed. It served as compatibility layer between Upstart jobs and SystemD services. All services have been rewritten to use `systemd.services` + +- `wmiimenu` is removed, as it has been removed by the developers upstream. Use `wimenu` from the `wmii-hg` package. + +- Gitit is no longer automatically added to the module list in NixOS and as such there will not be any manual entries for it. You will need to add an import statement to your NixOS configuration in order to use it, e.g. + + ```nix + { + imports = [ <nixpkgs/nixos/modules/services/misc/gitit.nix> ]; + } + ``` + + will include the Gitit service configuration options. + +- `nginx` does not accept flags for enabling and disabling modules anymore. Instead it accepts `modules` argument, which is a list of modules to be built in. All modules now reside in `nginxModules` set. Example configuration: + + ```nix + nginx.override { + modules = [ nginxModules.rtmp nginxModules.dav nginxModules.moreheaders ]; + } + ``` + +- `s3sync` is removed, as it hasn\'t been developed by upstream for 4 years and only runs with ruby 1.8. For an actively-developer alternative look at `tarsnap` and others. + +- `ruby_1_8` has been removed as it\'s not supported from upstream anymore and probably contains security issues. + +- `tidy-html5` package is removed. Upstream only provided `(lib)tidy5` during development, and now they went back to `(lib)tidy` to work as a drop-in replacement of the original package that has been unmaintained for years. You can (still) use the `html-tidy` package, which got updated to a stable release from this new upstream. + +- `extraDeviceOptions` argument is removed from `bumblebee` package. Instead there are now two separate arguments: `extraNvidiaDeviceOptions` and `extraNouveauDeviceOptions` for setting extra X11 options for nvidia and nouveau drivers, respectively. + +- The `Ctrl+Alt+Backspace` key combination no longer kills the X server by default. There\'s a new option `services.xserver.enableCtrlAltBackspace` allowing to enable the combination again. + +- `emacsPackagesNg` now contains all packages from the ELPA, MELPA, and MELPA Stable repositories. + +- Data directory for Postfix MTA server is moved from `/var/postfix` to `/var/lib/postfix`. Old configurations are migrated automatically. `service.postfix` module has also received many improvements, such as correct directories\' access rights, new `aliasFiles` and `mapFiles` options and more. + +- Filesystem options should now be configured as a list of strings, not a comma-separated string. The old style will continue to work, but print a warning, until the 16.09 release. An example of the new style: + + ```nix + { + fileSystems."/example" = { + device = "/dev/sdc"; + fsType = "btrfs"; + options = [ "noatime" "compress=lzo" "space_cache" "autodefrag" ]; + }; + } + ``` + +- CUPS, installed by `services.printing` module, now has its data directory in `/var/lib/cups`. Old configurations from `/etc/cups` are moved there automatically, but there might be problems. Also configuration options `services.printing.cupsdConf` and `services.printing.cupsdFilesConf` were removed because they had been allowing one to override configuration variables required for CUPS to work at all on NixOS. For most use cases, `services.printing.extraConf` and new option `services.printing.extraFilesConf` should be enough; if you encounter a situation when they are not, please file a bug. + + There are also Gutenprint improvements; in particular, a new option `services.printing.gutenprint` is added to enable automatic updating of Gutenprint PPMs; it\'s greatly recommended to enable it instead of adding `gutenprint` to the `drivers` list. + +- `services.xserver.vaapiDrivers` has been removed. Use `hardware.opengl.extraPackages{,32}` instead. You can also specify VDPAU drivers there. + +- `programs.ibus` moved to `i18n.inputMethod.ibus`. The option `programs.ibus.plugins` changed to `i18n.inputMethod.ibus.engines` and the option to enable ibus changed from `programs.ibus.enable` to `i18n.inputMethod.enabled`. `i18n.inputMethod.enabled` should be set to the used input method name, `"ibus"` for ibus. An example of the new style: + + ```nix + { + i18n.inputMethod.enabled = "ibus"; + i18n.inputMethod.ibus.engines = with pkgs.ibus-engines; [ anthy mozc ]; + } + ``` + + That is equivalent to the old version: + + ```nix + { + programs.ibus.enable = true; + programs.ibus.plugins = with pkgs; [ ibus-anthy mozc ]; + } + ``` + +- `services.udev.extraRules` option now writes rules to `99-local.rules` instead of `10-local.rules`. This makes all the user rules apply after others, so their results wouldn\'t be overriden by anything else. + +- Large parts of the `services.gitlab` module has been been rewritten. There are new configuration options available. The `stateDir` option was renamned to `statePath` and the `satellitesDir` option was removed. Please review the currently available options. + +- The option `services.nsd.zones.<name>.data` no longer interpret the dollar sign (\$) as a shell variable, as such it should not be escaped anymore. Thus the following zone data: + + ```dns-zone + $ORIGIN example.com. + $TTL 1800 + @ IN SOA ns1.vpn.nbp.name. admin.example.com. ( + + ``` + + Should modified to look like the actual file expected by nsd: + + ```dns-zone + $ORIGIN example.com. + $TTL 1800 + @ IN SOA ns1.vpn.nbp.name. admin.example.com. ( + + ``` + +- `service.syncthing.dataDir` options now has to point to exact folder where syncthing is writing to. Example configuration should look something like: + + ```nix + { + services.syncthing = { + enable = true; + dataDir = "/home/somebody/.syncthing"; + user = "somebody"; + }; + } + ``` + +- `networking.firewall.allowPing` is now enabled by default. Users are encouraged to configure an appropriate rate limit for their machines using the Kernel interface at `/proc/sys/net/ipv4/icmp_ratelimit` and `/proc/sys/net/ipv6/icmp/ratelimit` or using the firewall itself, i.e. by setting the NixOS option `networking.firewall.pingLimit`. + +- Systems with some broadcom cards used to result into a generated config that is no longer accepted. If you get errors like + + ```ShellSession + error: path ‘/nix/store/*-broadcom-sta-*’ does not exist and cannot be created + ``` + + you should either re-run `nixos-generate-config` or manually replace `"${config.boot.kernelPackages.broadcom_sta}"` by `config.boot.kernelPackages.broadcom_sta` in your `/etc/nixos/hardware-configuration.nix`. More discussion is on [ the github issue](https://github.com/NixOS/nixpkgs/pull/12595). + +- The `services.xserver.startGnuPGAgent` option has been removed. GnuPG 2.1.x changed the way the gpg-agent works, and that new approach no longer requires (or even supports) the \"start everything as a child of the agent\" scheme we\'ve implemented in NixOS for older versions. To configure the gpg-agent for your X session, add the following code to `~/.bashrc` or some file that's sourced when your shell is started: + + ```shell + GPG_TTY=$(tty) + export GPG_TTY + ``` + + If you want to use gpg-agent for SSH, too, add the following to your session initialization (e.g. `displayManager.sessionCommands`) + + ```shell + gpg-connect-agent /bye + unset SSH_AGENT_PID + export SSH_AUTH_SOCK="''${HOME}/.gnupg/S.gpg-agent.ssh" + ``` + + and make sure that + + ```conf + enable-ssh-support + ``` + + is included in your `~/.gnupg/gpg-agent.conf`. You will need to use `ssh-add` to re-add your ssh keys. If gpg's automatic transformation of the private keys to the new format fails, you will need to re-import your private keyring as well: + + ```ShellSession + gpg --import ~/.gnupg/secring.gpg + ``` + + The `gpg-agent(1)` man page has more details about this subject, i.e. in the \"EXAMPLES\" section. + +Other notable improvements: + +- `ejabberd` module is brought back and now works on NixOS. + +- Input method support was improved. New NixOS modules (fcitx, nabi and uim), fcitx engines (chewing, hangul, m17n, mozc and table-other) and ibus engines (hangul and m17n) have been added. diff --git a/nixos/doc/manual/release-notes/rl-1603.xml b/nixos/doc/manual/release-notes/rl-1603.xml deleted file mode 100644 index 6d4b28825fa..00000000000 --- a/nixos/doc/manual/release-notes/rl-1603.xml +++ /dev/null @@ -1,671 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-16.03"> - <title>Release 16.03 (“Emu”, 2016/03/31)</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - Systemd 229, bringing - <link - xlink:href="https://github.com/systemd/systemd/blob/v229/NEWS">numerous - improvements</link> over 217. - </para> - </listitem> - <listitem> - <para> - Linux 4.4 (was 3.18). - </para> - </listitem> - <listitem> - <para> - GCC 5.3 (was 4.9). Note that GCC 5 - <link - xlink:href="https://gcc.gnu.org/onlinedocs/libstdc++/manual/using_dual_abi.html">changes - the C++ ABI in an incompatible way</link>; this may cause problems if you - try to link objects compiled with different versions of GCC. - </para> - </listitem> - <listitem> - <para> - Glibc 2.23 (was 2.21). - </para> - </listitem> - <listitem> - <para> - Binutils 2.26 (was 2.23.1). See #909 - </para> - </listitem> - <listitem> - <para> - Improved support for ensuring - <link - xlink:href="https://reproducible-builds.org/">bitwise - reproducible builds</link>. For example, <literal>stdenv</literal> now sets - the environment variable - <envar - xlink:href="https://reproducible-builds.org/specs/source-date-epoch/">SOURCE_DATE_EPOCH</envar> - to a deterministic value, and Nix has - <link - xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-1.11">gained - an option</link> to repeat a build a number of times to test determinism. - An ongoing project, the goal of exact reproducibility is to allow binaries - to be verified independently (e.g., a user might only trust binaries that - appear in three independent binary caches). - </para> - </listitem> - <listitem> - <para> - Perl 5.22. - </para> - </listitem> - </itemizedlist> - - <para> - The following new services were added since the last release: - <itemizedlist> - <listitem> - <para> - <literal>services/monitoring/longview.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hardware/video/webcam/facetimehd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>i18n/input-method/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>i18n/input-method/fcitx.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>i18n/input-method/ibus.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>i18n/input-method/nabi.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>i18n/input-method/uim.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/fish.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>security/acme.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>security/audit.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>security/oath.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/hardware/irqbalance.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/dspam.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/opendkim.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/postsrsd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/rspamd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/rmilter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/autofs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/bepasty.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/calibre-server.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/cfdyndns.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/gammu-smsd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/mathics.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/matrix-synapse.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/octoprint.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/hdaps.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/heapster.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/longview.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/network-filesystems/netatalk.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/network-filesystems/xtreemfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/autossh.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/dnschain.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/gale.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/miniupnpd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/namecoind.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/ostinato.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/pdnsd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/shairport-sync.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/supplicant.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/search/kibana.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/haka.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/physlock.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/pump.io.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/hardware/libinput.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/window-managers/windowlab.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/initrd-network.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/initrd-ssh.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/loader/loader.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/networkd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/resolved.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/lxd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/rkt.nix</literal> - </para> - </listitem> - </itemizedlist> - </para> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - We no longer produce graphical ISO images and VirtualBox images for - <literal>i686-linux</literal>. A minimal ISO image is still provided. - </para> - </listitem> - <listitem> - <para> - Firefox and similar browsers are now <emphasis>wrapped by - default</emphasis>. The package and attribute names are plain - <literal>firefox</literal> or <literal>midori</literal>, etc. - Backward-compatibility attributes were set up, but note that - <command>nix-env -u</command> will <emphasis>not</emphasis> update your - current <literal>firefox-with-plugins</literal>; you have to uninstall it - and install <literal>firefox</literal> instead. - </para> - </listitem> - <listitem> - <para> - <command>wmiiSnap</command> has been replaced with - <command>wmii_hg</command>, but - <command>services.xserver.windowManager.wmii.enable</command> has been - updated respectively so this only affects you if you have explicitly - installed <command>wmiiSnap</command>. - </para> - </listitem> - <listitem> - <para> - <literal>jobs</literal> NixOS option has been removed. It served as - compatibility layer between Upstart jobs and SystemD services. All services - have been rewritten to use <literal>systemd.services</literal> - </para> - </listitem> - <listitem> - <para> - <command>wmiimenu</command> is removed, as it has been removed by the - developers upstream. Use <command>wimenu</command> from the - <command>wmii-hg</command> package. - </para> - </listitem> - <listitem> - <para> - Gitit is no longer automatically added to the module list in NixOS and as - such there will not be any manual entries for it. You will need to add an - import statement to your NixOS configuration in order to use it, e.g. -<programlisting><![CDATA[ -{ - imports = [ <nixpkgs/nixos/modules/services/misc/gitit.nix> ]; -} -]]></programlisting> - will include the Gitit service configuration options. - </para> - </listitem> - <listitem> - <para> - <command>nginx</command> does not accept flags for enabling and disabling - modules anymore. Instead it accepts <literal>modules</literal> argument, - which is a list of modules to be built in. All modules now reside in - <literal>nginxModules</literal> set. Example configuration: -<programlisting><![CDATA[ -nginx.override { - modules = [ nginxModules.rtmp nginxModules.dav nginxModules.moreheaders ]; -} -]]></programlisting> - </para> - </listitem> - <listitem> - <para> - <command>s3sync</command> is removed, as it hasn't been developed by - upstream for 4 years and only runs with ruby 1.8. For an actively-developer - alternative look at <command>tarsnap</command> and others. - </para> - </listitem> - <listitem> - <para> - <command>ruby_1_8</command> has been removed as it's not supported from - upstream anymore and probably contains security issues. - </para> - </listitem> - <listitem> - <para> - <literal>tidy-html5</literal> package is removed. Upstream only provided - <literal>(lib)tidy5</literal> during development, and now they went back to - <literal>(lib)tidy</literal> to work as a drop-in replacement of the - original package that has been unmaintained for years. You can (still) use - the <literal>html-tidy</literal> package, which got updated to a stable - release from this new upstream. - </para> - </listitem> - <listitem> - <para> - <literal>extraDeviceOptions</literal> argument is removed from - <literal>bumblebee</literal> package. Instead there are now two separate - arguments: <literal>extraNvidiaDeviceOptions</literal> and - <literal>extraNouveauDeviceOptions</literal> for setting extra X11 options - for nvidia and nouveau drivers, respectively. - </para> - </listitem> - <listitem> - <para> - The <literal>Ctrl+Alt+Backspace</literal> key combination no longer kills - the X server by default. There's a new option - <option>services.xserver.enableCtrlAltBackspace</option> allowing to enable - the combination again. - </para> - </listitem> - <listitem> - <para> - <literal>emacsPackagesNg</literal> now contains all packages from the ELPA, - MELPA, and MELPA Stable repositories. - </para> - </listitem> - <listitem> - <para> - Data directory for Postfix MTA server is moved from - <filename>/var/postfix</filename> to <filename>/var/lib/postfix</filename>. - Old configurations are migrated automatically. - <literal>service.postfix</literal> module has also received many - improvements, such as correct directories' access rights, new - <literal>aliasFiles</literal> and <literal>mapFiles</literal> options and - more. - </para> - </listitem> - <listitem> - <para> - Filesystem options should now be configured as a list of strings, not a - comma-separated string. The old style will continue to work, but print a - warning, until the 16.09 release. An example of the new style: -<programlisting> -fileSystems."/example" = { - device = "/dev/sdc"; - fsType = "btrfs"; - options = [ "noatime" "compress=lzo" "space_cache" "autodefrag" ]; -}; -</programlisting> - </para> - </listitem> - <listitem> - <para> - CUPS, installed by <literal>services.printing</literal> module, now has its - data directory in <filename>/var/lib/cups</filename>. Old configurations - from <filename>/etc/cups</filename> are moved there automatically, but - there might be problems. Also configuration options - <literal>services.printing.cupsdConf</literal> and - <literal>services.printing.cupsdFilesConf</literal> were removed because - they had been allowing one to override configuration variables required for - CUPS to work at all on NixOS. For most use cases, - <literal>services.printing.extraConf</literal> and new option - <literal>services.printing.extraFilesConf</literal> should be enough; if - you encounter a situation when they are not, please file a bug. - </para> - <para> - There are also Gutenprint improvements; in particular, a new option - <literal>services.printing.gutenprint</literal> is added to enable - automatic updating of Gutenprint PPMs; it's greatly recommended to enable - it instead of adding <literal>gutenprint</literal> to the - <literal>drivers</literal> list. - </para> - </listitem> - <listitem> - <para> - <literal>services.xserver.vaapiDrivers</literal> has been removed. Use - <literal>hardware.opengl.extraPackages{,32}</literal> instead. You can also - specify VDPAU drivers there. - </para> - </listitem> - <listitem> - <para> - <literal>programs.ibus</literal> moved to - <literal>i18n.inputMethod.ibus</literal>. The option - <literal>programs.ibus.plugins</literal> changed to - <literal>i18n.inputMethod.ibus.engines</literal> and the option to enable - ibus changed from <literal>programs.ibus.enable</literal> to - <literal>i18n.inputMethod.enabled</literal>. - <literal>i18n.inputMethod.enabled</literal> should be set to the used input - method name, <literal>"ibus"</literal> for ibus. An example of the new - style: -<programlisting> -i18n.inputMethod.enabled = "ibus"; -i18n.inputMethod.ibus.engines = with pkgs.ibus-engines; [ anthy mozc ]; -</programlisting> - That is equivalent to the old version: -<programlisting> -programs.ibus.enable = true; -programs.ibus.plugins = with pkgs; [ ibus-anthy mozc ]; -</programlisting> - </para> - </listitem> - <listitem> - <para> - <literal>services.udev.extraRules</literal> option now writes rules to - <filename>99-local.rules</filename> instead of - <filename>10-local.rules</filename>. This makes all the user rules apply - after others, so their results wouldn't be overriden by anything else. - </para> - </listitem> - <listitem> - <para> - Large parts of the <literal>services.gitlab</literal> module has been been - rewritten. There are new configuration options available. The - <literal>stateDir</literal> option was renamned to - <literal>statePath</literal> and the <literal>satellitesDir</literal> - option was removed. Please review the currently available options. - </para> - </listitem> - <listitem> - <para> - The option <option>services.nsd.zones.<name>.data</option> no longer - interpret the dollar sign ($) as a shell variable, as such it should not be - escaped anymore. Thus the following zone data: - </para> -<programlisting> -\$ORIGIN example.com. -\$TTL 1800 -@ IN SOA ns1.vpn.nbp.name. admin.example.com. ( - </programlisting> - <para> - Should modified to look like the actual file expected by nsd: - </para> -<programlisting> -$ORIGIN example.com. -$TTL 1800 -@ IN SOA ns1.vpn.nbp.name. admin.example.com. ( - </programlisting> - </listitem> - <listitem> - <para> - <literal>service.syncthing.dataDir</literal> options now has to point to - exact folder where syncthing is writing to. Example configuration should - look something like: - </para> -<programlisting> -services.syncthing = { - enable = true; - dataDir = "/home/somebody/.syncthing"; - user = "somebody"; -}; - </programlisting> - </listitem> - <listitem> - <para> - <literal>networking.firewall.allowPing</literal> is now enabled by default. - Users are encouraged to configure an appropriate rate limit for their - machines using the Kernel interface at - <filename>/proc/sys/net/ipv4/icmp_ratelimit</filename> and - <filename>/proc/sys/net/ipv6/icmp/ratelimit</filename> or using the - firewall itself, i.e. by setting the NixOS option - <literal>networking.firewall.pingLimit</literal>. - </para> - </listitem> - <listitem> - <para> - Systems with some broadcom cards used to result into a generated config - that is no longer accepted. If you get errors like -<screen>error: path ‘/nix/store/*-broadcom-sta-*’ does not exist and cannot be created</screen> - you should either re-run <command>nixos-generate-config</command> or - manually replace - <literal>"${config.boot.kernelPackages.broadcom_sta}"</literal> by - <literal>config.boot.kernelPackages.broadcom_sta</literal> in your - <filename>/etc/nixos/hardware-configuration.nix</filename>. More discussion - is on <link xlink:href="https://github.com/NixOS/nixpkgs/pull/12595"> the - github issue</link>. - </para> - </listitem> - <listitem> - <para> - The <literal>services.xserver.startGnuPGAgent</literal> option has been - removed. GnuPG 2.1.x changed the way the gpg-agent works, and that new - approach no longer requires (or even supports) the "start everything as a - child of the agent" scheme we've implemented in NixOS for older versions. - To configure the gpg-agent for your X session, add the following code to - <filename>~/.bashrc</filename> or some file that’s sourced when your - shell is started: -<programlisting> -GPG_TTY=$(tty) -export GPG_TTY - </programlisting> - If you want to use gpg-agent for SSH, too, add the following to your - session initialization (e.g. - <literal>displayManager.sessionCommands</literal>) -<programlisting> -gpg-connect-agent /bye -unset SSH_AGENT_PID -export SSH_AUTH_SOCK="''${HOME}/.gnupg/S.gpg-agent.ssh" - </programlisting> - and make sure that -<programlisting> -enable-ssh-support - </programlisting> - is included in your <filename>~/.gnupg/gpg-agent.conf</filename>. You will - need to use <command>ssh-add</command> to re-add your ssh keys. If gpg’s - automatic transformation of the private keys to the new format fails, you - will need to re-import your private keyring as well: -<programlisting> -gpg --import ~/.gnupg/secring.gpg - </programlisting> - The <command>gpg-agent(1)</command> man page has more details about this - subject, i.e. in the "EXAMPLES" section. - </para> - </listitem> - </itemizedlist> - - <para> - Other notable improvements: - <itemizedlist> -<!-- - <listitem> - <para>The <command>command-not-found</command> hook was extended. - Apart from <literal>$NIX_AUTO_INSTALL</literal> variable, - it newly also checks for <literal>$NIX_AUTO_RUN</literal> - which causes it to directly run the missing commands via - <command>nix-shell</command> (without installing anything).</para> - </listitem> - --> - <listitem> - <para> - <literal>ejabberd</literal> module is brought back and now works on NixOS. - </para> - </listitem> - <listitem> - <para> - Input method support was improved. New NixOS modules (fcitx, nabi and - uim), fcitx engines (chewing, hangul, m17n, mozc and table-other) and ibus - engines (hangul and m17n) have been added. - </para> - </listitem> - </itemizedlist> - </para> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1609.section.md b/nixos/doc/manual/release-notes/rl-1609.section.md new file mode 100644 index 00000000000..075f0cf52cd --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1609.section.md @@ -0,0 +1,73 @@ +# Release 16.09 ("Flounder", 2016/09/30) {#sec-release-16.09} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- Many NixOS configurations and Nix packages now use significantly less disk space, thanks to the [extensive work on closure size reduction](https://github.com/NixOS/nixpkgs/issues/7117). For example, the closure size of a minimal NixOS container went down from \~424 MiB in 16.03 to \~212 MiB in 16.09, while the closure size of Firefox went from \~651 MiB to \~259 MiB. + +- To improve security, packages are now [built using various hardening features](https://github.com/NixOS/nixpkgs/pull/12895). See the Nixpkgs manual for more information. + +- Support for PXE netboot. See [](#sec-booting-from-pxe) for documentation. + +- X.org server 1.18. If you use the `ati_unfree` driver, 1.17 is still used due to an ABI incompatibility. + +- This release is based on Glibc 2.24, GCC 5.4.0 and systemd 231. The default Linux kernel remains 4.4. + +The following new services were added since the last release: + +- `(this will get automatically generated at release time)` + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- A large number of packages have been converted to use the multiple outputs feature of Nix to greatly reduce the amount of required disk space, as mentioned above. This may require changes to any custom packages to make them build again; see the relevant chapter in the Nixpkgs manual for more information. (Additional caveat to packagers: some packaging conventions related to multiple-output packages [were changed](https://github.com/NixOS/nixpkgs/pull/14766) late (August 2016) in the release cycle and differ from the initial introduction of multiple outputs.) + +- Previous versions of Nixpkgs had support for all versions of the LTS Haskell package set. That support has been dropped. The previously provided `haskell.packages.lts-x_y` package sets still exist in name to aviod breaking user code, but these package sets don\'t actually contain the versions mandated by the corresponding LTS release. Instead, our package set it loosely based on the latest available LTS release, i.e. LTS 7.x at the time of this writing. New releases of NixOS and Nixpkgs will drop those old names entirely. [The motivation for this change](https://nixos.org/nix-dev/2016-June/020585.html) has been discussed at length on the `nix-dev` mailing list and in [Github issue \#14897](https://github.com/NixOS/nixpkgs/issues/14897). Development strategies for Haskell hackers who want to rely on Nix and NixOS have been described in [another nix-dev article](https://nixos.org/nix-dev/2016-June/020642.html). + +- Shell aliases for systemd sub-commands [were dropped](https://github.com/NixOS/nixpkgs/pull/15598): `start`, `stop`, `restart`, `status`. + +- Redis now binds to 127.0.0.1 only instead of listening to all network interfaces. This is the default behavior of Redis 3.2 + +- `/var/empty` is now immutable. Activation script runs `chattr +i` to forbid any modifications inside the folder. See [ the pull request](https://github.com/NixOS/nixpkgs/pull/18365) for what bugs this caused. + +- Gitlab\'s maintainance script `gitlab-runner` was removed and split up into the more clearer `gitlab-run` and `gitlab-rake` scripts, because `gitlab-runner` is a component of Gitlab CI. + +- `services.xserver.libinput.accelProfile` default changed from `flat` to `adaptive`, as per [ official documentation](https://wayland.freedesktop.org/libinput/doc/latest/group__config.html#gad63796972347f318b180e322e35cee79). + +- `fonts.fontconfig.ultimate.rendering` was removed because our presets were obsolete for some time. New presets are hardcoded into FreeType; you can select a preset via `fonts.fontconfig.ultimate.preset`. You can customize those presets via ordinary environment variables, using `environment.variables`. + +- The `audit` service is no longer enabled by default. Use `security.audit.enable = true` to explicitly enable it. + +- `pkgs.linuxPackages.virtualbox` now contains only the kernel modules instead of the VirtualBox user space binaries. If you want to reference the user space binaries, you have to use the new `pkgs.virtualbox` instead. + +- `goPackages` was replaced with separated Go applications in appropriate `nixpkgs` categories. Each Go package uses its own dependency set. There\'s also a new `go2nix` tool introduced to generate a Go package definition from its Go source automatically. + +- `services.mongodb.extraConfig` configuration format was changed to YAML. + +- PHP has been upgraded to 7.0 + +Other notable improvements: + +- Revamped grsecurity/PaX support. There is now only a single general-purpose distribution kernel and the configuration interface has been streamlined. Desktop users should be able to simply set + + ```nix + { + security.grsecurity.enable = true; + } + ``` + + to get a reasonably secure system without having to sacrifice too much functionality. + +- Special filesystems, like `/proc`, `/run` and others, now have the same mount options as recommended by systemd and are unified across different places in NixOS. Mount options are updated during `nixos-rebuild switch` if possible. One benefit from this is improved security --- most such filesystems are now mounted with `noexec`, `nodev` and/or `nosuid` options. + +- The reverse path filter was interfering with DHCPv4 server operation in the past. An exception for DHCPv4 and a new option to log packets that were dropped due to the reverse path filter was added (`networking.firewall.logReversePathDrops`) for easier debugging. + +- Containers configuration within `containers.<name>.config` is [now properly typed and checked](https://github.com/NixOS/nixpkgs/pull/17365). In particular, partial configurations are merged correctly. + +- The directory container setuid wrapper programs, `/var/setuid-wrappers`, [is now updated atomically to prevent failures if the switch to a new configuration is interrupted.](https://github.com/NixOS/nixpkgs/pull/18124) + +- `services.xserver.startGnuPGAgent` has been removed due to GnuPG 2.1.x bump. See [ how to achieve similar behavior](https://github.com/NixOS/nixpkgs/commit/5391882ebd781149e213e8817fba6ac3c503740c). You might need to `pkill gpg-agent` after the upgrade to prevent a stale agent being in the way. + +- [ Declarative users could share the uid due to the bug in the script handling conflict resolution. ](https://github.com/NixOS/nixpkgs/commit/e561edc322d275c3687fec431935095cfc717147) + +- Gummi boot has been replaced using systemd-boot. + +- Hydra package and NixOS module were added for convenience. diff --git a/nixos/doc/manual/release-notes/rl-1609.xml b/nixos/doc/manual/release-notes/rl-1609.xml deleted file mode 100644 index 4a2343edc97..00000000000 --- a/nixos/doc/manual/release-notes/rl-1609.xml +++ /dev/null @@ -1,277 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-16.09"> - <title>Release 16.09 (“Flounder”, 2016/09/30)</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - Many NixOS configurations and Nix packages now use significantly less disk - space, thanks to the - <link - xlink:href="https://github.com/NixOS/nixpkgs/issues/7117">extensive - work on closure size reduction</link>. For example, the closure size of a - minimal NixOS container went down from ~424 MiB in 16.03 to ~212 MiB in - 16.09, while the closure size of Firefox went from ~651 MiB to ~259 MiB. - </para> - </listitem> - <listitem> - <para> - To improve security, packages are now - <link - xlink:href="https://github.com/NixOS/nixpkgs/pull/12895">built - using various hardening features</link>. See the Nixpkgs manual for more - information. - </para> - </listitem> - <listitem> - <para> - Support for PXE netboot. See <xref - linkend="sec-booting-from-pxe" /> - for documentation. - </para> - </listitem> - <listitem> - <para> - X.org server 1.18. If you use the <literal>ati_unfree</literal> driver, - 1.17 is still used due to an ABI incompatibility. - </para> - </listitem> - <listitem> - <para> - This release is based on Glibc 2.24, GCC 5.4.0 and systemd 231. The default - Linux kernel remains 4.4. - </para> - </listitem> - </itemizedlist> - - <para> - The following new services were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>(this will get automatically generated at release time)</literal> - </para> - </listitem> - </itemizedlist> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - A large number of packages have been converted to use the multiple outputs - feature of Nix to greatly reduce the amount of required disk space, as - mentioned above. This may require changes to any custom packages to make - them build again; see the relevant chapter in the Nixpkgs manual for more - information. (Additional caveat to packagers: some packaging conventions - related to multiple-output packages - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/14766">were - changed</link> late (August 2016) in the release cycle and differ from the - initial introduction of multiple outputs.) - </para> - </listitem> - <listitem> - <para> - Previous versions of Nixpkgs had support for all versions of the LTS - Haskell package set. That support has been dropped. The previously provided - <literal>haskell.packages.lts-x_y</literal> package sets still exist in - name to aviod breaking user code, but these package sets don't actually - contain the versions mandated by the corresponding LTS release. Instead, - our package set it loosely based on the latest available LTS release, i.e. - LTS 7.x at the time of this writing. New releases of NixOS and Nixpkgs will - drop those old names entirely. - <link - xlink:href="https://nixos.org/nix-dev/2016-June/020585.html">The - motivation for this change</link> has been discussed at length on the - <literal>nix-dev</literal> mailing list and in - <link - xlink:href="https://github.com/NixOS/nixpkgs/issues/14897">Github - issue #14897</link>. Development strategies for Haskell hackers who want to - rely on Nix and NixOS have been described in - <link - xlink:href="https://nixos.org/nix-dev/2016-June/020642.html">another - nix-dev article</link>. - </para> - </listitem> - <listitem> - <para> - Shell aliases for systemd sub-commands - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/15598">were - dropped</link>: <command>start</command>, <command>stop</command>, - <command>restart</command>, <command>status</command>. - </para> - </listitem> - <listitem> - <para> - Redis now binds to 127.0.0.1 only instead of listening to all network - interfaces. This is the default behavior of Redis 3.2 - </para> - </listitem> - <listitem> - <para> - <literal>/var/empty</literal> is now immutable. Activation script runs - <command>chattr +i</command> to forbid any modifications inside the folder. - See <link xlink:href="https://github.com/NixOS/nixpkgs/pull/18365"> the - pull request</link> for what bugs this caused. - </para> - </listitem> - <listitem> - <para> - Gitlab's maintainance script <command>gitlab-runner</command> was removed - and split up into the more clearer <command>gitlab-run</command> and - <command>gitlab-rake</command> scripts, because - <command>gitlab-runner</command> is a component of Gitlab CI. - </para> - </listitem> - <listitem> - <para> - <literal>services.xserver.libinput.accelProfile</literal> default changed - from <literal>flat</literal> to <literal>adaptive</literal>, as per - <link xlink:href="https://wayland.freedesktop.org/libinput/doc/latest/group__config.html#gad63796972347f318b180e322e35cee79"> - official documentation</link>. - </para> - </listitem> - <listitem> - <para> - <literal>fonts.fontconfig.ultimate.rendering</literal> was removed because - our presets were obsolete for some time. New presets are hardcoded into - FreeType; you can select a preset via - <literal>fonts.fontconfig.ultimate.preset</literal>. You can customize - those presets via ordinary environment variables, using - <literal>environment.variables</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>audit</literal> service is no longer enabled by default. Use - <literal>security.audit.enable = true</literal> to explicitly enable it. - </para> - </listitem> - <listitem> - <para> - <literal>pkgs.linuxPackages.virtualbox</literal> now contains only the - kernel modules instead of the VirtualBox user space binaries. If you want - to reference the user space binaries, you have to use the new - <literal>pkgs.virtualbox</literal> instead. - </para> - </listitem> - <listitem> - <para> - <literal>goPackages</literal> was replaced with separated Go applications - in appropriate <literal>nixpkgs</literal> categories. Each Go package uses - its own dependency set. There's also a new <literal>go2nix</literal> tool - introduced to generate a Go package definition from its Go source - automatically. - </para> - </listitem> - <listitem> - <para> - <literal>services.mongodb.extraConfig</literal> configuration format was - changed to YAML. - </para> - </listitem> - <listitem> - <para> - PHP has been upgraded to 7.0 - </para> - </listitem> - </itemizedlist> - - <para> - Other notable improvements: - </para> - - <itemizedlist> - <listitem> - <para> - Revamped grsecurity/PaX support. There is now only a single general-purpose - distribution kernel and the configuration interface has been streamlined. - Desktop users should be able to simply set -<programlisting>security.grsecurity.enable = true</programlisting> - to get a reasonably secure system without having to sacrifice too much - functionality. - </para> - </listitem> - <listitem> - <para> - Special filesystems, like <literal>/proc</literal>, <literal>/run</literal> - and others, now have the same mount options as recommended by systemd and - are unified across different places in NixOS. Mount options are updated - during <command>nixos-rebuild switch</command> if possible. One benefit - from this is improved security — most such filesystems are now mounted - with <literal>noexec</literal>, <literal>nodev</literal> and/or - <literal>nosuid</literal> options. - </para> - </listitem> - <listitem> - <para> - The reverse path filter was interfering with DHCPv4 server operation in the - past. An exception for DHCPv4 and a new option to log packets that were - dropped due to the reverse path filter was added - (<literal>networking.firewall.logReversePathDrops</literal>) for easier - debugging. - </para> - </listitem> - <listitem> - <para> - Containers configuration within - <literal>containers.<name>.config</literal> is - <link - xlink:href="https://github.com/NixOS/nixpkgs/pull/17365">now - properly typed and checked</link>. In particular, partial configurations - are merged correctly. - </para> - </listitem> - <listitem> - <para> - The directory container setuid wrapper programs, - <filename>/var/setuid-wrappers</filename>, - <link - xlink:href="https://github.com/NixOS/nixpkgs/pull/18124">is now - updated atomically to prevent failures if the switch to a new configuration - is interrupted.</link> - </para> - </listitem> - <listitem> - <para> - <literal>services.xserver.startGnuPGAgent</literal> has been removed due to - GnuPG 2.1.x bump. See - <link - xlink:href="https://github.com/NixOS/nixpkgs/commit/5391882ebd781149e213e8817fba6ac3c503740c"> - how to achieve similar behavior</link>. You might need to <literal>pkill - gpg-agent</literal> after the upgrade to prevent a stale agent being in the - way. - </para> - </listitem> - <listitem> - <para> - <link xlink:href="https://github.com/NixOS/nixpkgs/commit/e561edc322d275c3687fec431935095cfc717147"> - Declarative users could share the uid due to the bug in the script handling - conflict resolution. </link> - </para> - </listitem> - <listitem> - <para> - Gummi boot has been replaced using systemd-boot. - </para> - </listitem> - <listitem> - <para> - Hydra package and NixOS module were added for convenience. - </para> - </listitem> - </itemizedlist> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1703.section.md b/nixos/doc/manual/release-notes/rl-1703.section.md new file mode 100644 index 00000000000..7f424f2a6ce --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1703.section.md @@ -0,0 +1,303 @@ +# Release 17.03 ("Gorilla", 2017/03/31) {#sec-release-17.03} + +## Highlights {#sec-release-17.03-highlights} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- Nixpkgs is now extensible through overlays. See the [Nixpkgs manual](https://nixos.org/nixpkgs/manual/#sec-overlays-install) for more information. + +- This release is based on Glibc 2.25, GCC 5.4.0 and systemd 232. The default Linux kernel is 4.9 and Nix is at 1.11.8. + +- The default desktop environment now is KDE\'s Plasma 5. KDE 4 has been removed + +- The setuid wrapper functionality now supports setting capabilities. + +- X.org server uses branch 1.19. Due to ABI incompatibilities, `ati_unfree` keeps forcing 1.17 and `amdgpu-pro` starts forcing 1.18. + +- Cross compilation has been rewritten. See the nixpkgs manual for details. The most obvious breaking change is that in derivations there is no `.nativeDrv` nor `.crossDrv` are now cross by default, not native. + +- The `overridePackages` function has been rewritten to be replaced by [ overlays](https://nixos.org/nixpkgs/manual/#sec-overlays-install) + +- Packages in nixpkgs can be marked as insecure through listed vulnerabilities. See the [Nixpkgs manual](https://nixos.org/nixpkgs/manual/#sec-allow-insecure) for more information. + +- PHP now defaults to PHP 7.1 + +## New Services {#sec-release-17.03-new-services} + +The following new services were added since the last release: + +- `hardware/ckb.nix` + +- `hardware/mcelog.nix` + +- `hardware/usb-wwan.nix` + +- `hardware/video/capture/mwprocapture.nix` + +- `programs/adb.nix` + +- `programs/chromium.nix` + +- `programs/gphoto2.nix` + +- `programs/java.nix` + +- `programs/mtr.nix` + +- `programs/oblogout.nix` + +- `programs/vim.nix` + +- `programs/wireshark.nix` + +- `security/dhparams.nix` + +- `services/audio/ympd.nix` + +- `services/computing/boinc/client.nix` + +- `services/continuous-integration/buildbot/master.nix` + +- `services/continuous-integration/buildbot/worker.nix` + +- `services/continuous-integration/gitlab-runner.nix` + +- `services/databases/riak-cs.nix` + +- `services/databases/stanchion.nix` + +- `services/desktops/gnome3/gnome-terminal-server.nix` + +- `services/editors/infinoted.nix` + +- `services/hardware/illum.nix` + +- `services/hardware/trezord.nix` + +- `services/logging/journalbeat.nix` + +- `services/mail/offlineimap.nix` + +- `services/mail/postgrey.nix` + +- `services/misc/couchpotato.nix` + +- `services/misc/docker-registry.nix` + +- `services/misc/errbot.nix` + +- `services/misc/geoip-updater.nix` + +- `services/misc/gogs.nix` + +- `services/misc/leaps.nix` + +- `services/misc/nix-optimise.nix` + +- `services/misc/ssm-agent.nix` + +- `services/misc/sssd.nix` + +- `services/monitoring/arbtt.nix` + +- `services/monitoring/netdata.nix` + +- `services/monitoring/prometheus/default.nix` + +- `services/monitoring/prometheus/alertmanager.nix` + +- `services/monitoring/prometheus/blackbox-exporter.nix` + +- `services/monitoring/prometheus/json-exporter.nix` + +- `services/monitoring/prometheus/nginx-exporter.nix` + +- `services/monitoring/prometheus/node-exporter.nix` + +- `services/monitoring/prometheus/snmp-exporter.nix` + +- `services/monitoring/prometheus/unifi-exporter.nix` + +- `services/monitoring/prometheus/varnish-exporter.nix` + +- `services/monitoring/sysstat.nix` + +- `services/monitoring/telegraf.nix` + +- `services/monitoring/vnstat.nix` + +- `services/network-filesystems/cachefilesd.nix` + +- `services/network-filesystems/glusterfs.nix` + +- `services/network-filesystems/ipfs.nix` + +- `services/networking/dante.nix` + +- `services/networking/dnscrypt-wrapper.nix` + +- `services/networking/fakeroute.nix` + +- `services/networking/flannel.nix` + +- `services/networking/htpdate.nix` + +- `services/networking/miredo.nix` + +- `services/networking/nftables.nix` + +- `services/networking/powerdns.nix` + +- `services/networking/pdns-recursor.nix` + +- `services/networking/quagga.nix` + +- `services/networking/redsocks.nix` + +- `services/networking/wireguard.nix` + +- `services/system/cgmanager.nix` + +- `services/torrent/opentracker.nix` + +- `services/web-apps/atlassian/confluence.nix` + +- `services/web-apps/atlassian/crowd.nix` + +- `services/web-apps/atlassian/jira.nix` + +- `services/web-apps/frab.nix` + +- `services/web-apps/nixbot.nix` + +- `services/web-apps/selfoss.nix` + +- `services/web-apps/quassel-webserver.nix` + +- `services/x11/unclutter-xfixes.nix` + +- `services/x11/urxvtd.nix` + +- `system/boot/systemd-nspawn.nix` + +- `virtualisation/ecs-agent.nix` + +- `virtualisation/lxcfs.nix` + +- `virtualisation/openstack/keystone.nix` + +- `virtualisation/openstack/glance.nix` + +## Backward Incompatibilities {#sec-release-17.03-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- Derivations have no `.nativeDrv` nor `.crossDrv` and are now cross by default, not native. + +- `stdenv.overrides` is now expected to take `self` and `super` arguments. See `lib.trivial.extends` for what those parameters represent. + +- `ansible` now defaults to ansible version 2 as version 1 has been removed due to a serious [ vulnerability](https://www.computest.nl/advisories/CT-2017-0109_Ansible.txt) unpatched by upstream. + +- `gnome` alias has been removed along with `gtk`, `gtkmm` and several others. Now you need to use versioned attributes, like `gnome3`. + +- The attribute name of the Radicale daemon has been changed from `pythonPackages.radicale` to `radicale`. + +- The `stripHash` bash function in `stdenv` changed according to its documentation; it now outputs the stripped name to `stdout` instead of putting it in the variable `strippedName`. + +- PHP now scans for extra configuration .ini files in /etc/php.d instead of /etc. This prevents accidentally loading non-PHP .ini files that may be in /etc. + +- Two lone top-level dict dbs moved into `dictdDBs`. This affects: `dictdWordnet` which is now at `dictdDBs.wordnet` and `dictdWiktionary` which is now at `dictdDBs.wiktionary` + +- Parsoid service now uses YAML configuration format. `service.parsoid.interwikis` is now called `service.parsoid.wikis` and is a list of either API URLs or attribute sets as specified in parsoid\'s documentation. + +- `Ntpd` was replaced by `systemd-timesyncd` as the default service to synchronize system time with a remote NTP server. The old behavior can be restored by setting `services.ntp.enable` to `true`. Upstream time servers for all NTP implementations are now configured using `networking.timeServers`. + +- `service.nylon` is now declared using named instances. As an example: + + ```nix + { + services.nylon = { + enable = true; + acceptInterface = "br0"; + bindInterface = "tun1"; + port = 5912; + }; + } + ``` + + should be replaced with: + + ```nix + { + services.nylon.myvpn = { + enable = true; + acceptInterface = "br0"; + bindInterface = "tun1"; + port = 5912; + }; + } + ``` + + this enables you to declare a SOCKS proxy for each uplink. + +- `overridePackages` function no longer exists. It is replaced by [ overlays](https://nixos.org/nixpkgs/manual/#sec-overlays-install). For example, the following code: + + ```nix + let + pkgs = import <nixpkgs> {}; + in + pkgs.overridePackages (self: super: ...) + ``` + + should be replaced by: + + ```nix + let + pkgs = import <nixpkgs> {}; + in + import pkgs.path { overlays = [(self: super: ...)]; } + ``` + +- Autoloading connection tracking helpers is now disabled by default. This default was also changed in the Linux kernel and is considered insecure if not configured properly in your firewall. If you need connection tracking helpers (i.e. for active FTP) please enable `networking.firewall.autoLoadConntrackHelpers` and tune `networking.firewall.connectionTrackingModules` to suit your needs. + +- `local_recipient_maps` is not set to empty value by Postfix service. It\'s an insecure default as stated by Postfix documentation. Those who want to retain this setting need to set it via `services.postfix.extraConfig`. + +- Iputils no longer provide ping6 and traceroute6. The functionality of these tools has been integrated into ping and traceroute respectively. To enforce an address family the new flags `-4` and `-6` have been added. One notable incompatibility is that specifying an interface (for link-local IPv6 for instance) is no longer done with the `-I` flag, but by encoding the interface into the address (`ping fe80::1%eth0`). + +- The socket handling of the `services.rmilter` module has been fixed and refactored. As rmilter doesn\'t support binding to more than one socket, the options `bindUnixSockets` and `bindInetSockets` have been replaced by `services.rmilter.bindSocket.*`. The default is still a unix socket in `/run/rmilter/rmilter.sock`. Refer to the options documentation for more information. + +- The `fetch*` functions no longer support md5, please use sha256 instead. + +- The dnscrypt-proxy module interface has been streamlined around the `extraArgs` option. Where possible, legacy option declarations are mapped to `extraArgs` but will emit warnings. The `resolverList` has been outright removed: to use an unlisted resolver, use the `customResolver` option. + +- torbrowser now stores local state under `~/.local/share/tor-browser` by default. Any browser profile data from the old location, `~/.torbrowser4`, must be migrated manually. + +- The ihaskell, monetdb, offlineimap and sitecopy services have been removed. + +## Other Notable Changes {#sec-release-17.03-notable-changes} + +- Module type system have a new extensible option types feature that allow to extend certain types, such as enum, through multiple option declarations of the same option across multiple modules. + +- `jre` now defaults to GTK UI by default. This improves visual consistency and makes Java follow system font style, improving the situation on HighDPI displays. This has a cost of increased closure size; for server and other headless workloads it\'s recommended to use `jre_headless`. + +- Python 2.6 interpreter and package set have been removed. + +- The Python 2.7 interpreter does not use modules anymore. Instead, all CPython interpreters now include the whole standard library except for \`tkinter\`, which is available in the Python package set. + +- Python 2.7, 3.5 and 3.6 are now built deterministically and 3.4 mostly. Minor modifications had to be made to the interpreters in order to generate deterministic bytecode. This has security implications and is relevant for those using Python in a `nix-shell`. See the Nixpkgs manual for details. + +- The Python package sets now use a fixed-point combinator and the sets are available as attributes of the interpreters. + +- The Python function `buildPythonPackage` has been improved and can be used to build from Setuptools source, Flit source, and precompiled Wheels. + +- When adding new or updating current Python libraries, the expressions should be put in separate files in `pkgs/development/python-modules` and called from `python-packages.nix`. + +- The dnscrypt-proxy service supports synchronizing the list of public resolvers without working DNS resolution. This fixes issues caused by the resolver list becoming outdated. It also improves the viability of DNSCrypt only configurations. + +- Containers using bridged networking no longer lose their connection after changes to the host networking. + +- ZFS supports pool auto scrubbing. + +- The bind DNS utilities (e.g. dig) have been split into their own output and are now also available in `pkgs.dnsutils` and it is no longer necessary to pull in all of `bind` to use them. + +- Per-user configuration was moved from `~/.nixpkgs` to `~/.config/nixpkgs`. The former is still valid for `config.nix` for backwards compatibility. diff --git a/nixos/doc/manual/release-notes/rl-1703.xml b/nixos/doc/manual/release-notes/rl-1703.xml deleted file mode 100644 index 14b31b232e9..00000000000 --- a/nixos/doc/manual/release-notes/rl-1703.xml +++ /dev/null @@ -1,817 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.03"> - <title>Release 17.03 (“Gorilla”, 2017/03/31)</title> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.03-highlights"> - <title>Highlights</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - Nixpkgs is now extensible through overlays. See the - <link - xlink:href="https://nixos.org/nixpkgs/manual/#sec-overlays-install">Nixpkgs - manual</link> for more information. - </para> - </listitem> - <listitem> - <para> - This release is based on Glibc 2.25, GCC 5.4.0 and systemd 232. The - default Linux kernel is 4.9 and Nix is at 1.11.8. - </para> - </listitem> - <listitem> - <para> - The default desktop environment now is KDE's Plasma 5. KDE 4 has been - removed - </para> - </listitem> - <listitem> - <para> - The setuid wrapper functionality now supports setting capabilities. - </para> - </listitem> - <listitem> - <para> - X.org server uses branch 1.19. Due to ABI incompatibilities, - <literal>ati_unfree</literal> keeps forcing 1.17 and - <literal>amdgpu-pro</literal> starts forcing 1.18. - </para> - </listitem> - <listitem> - <para> - Cross compilation has been rewritten. See the nixpkgs manual for details. - The most obvious breaking change is that in derivations there is no - <literal>.nativeDrv</literal> nor <literal>.crossDrv</literal> are now - cross by default, not native. - </para> - </listitem> - <listitem> - <para> - The <literal>overridePackages</literal> function has been rewritten to be - replaced by - <link - xlink:href="https://nixos.org/nixpkgs/manual/#sec-overlays-install"> - overlays</link> - </para> - </listitem> - <listitem> - <para> - Packages in nixpkgs can be marked as insecure through listed - vulnerabilities. See the - <link - xlink:href="https://nixos.org/nixpkgs/manual/#sec-allow-insecure">Nixpkgs - manual</link> for more information. - </para> - </listitem> - <listitem> - <para> - PHP now defaults to PHP 7.1 - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.03-new-services"> - <title>New Services</title> - - <para> - The following new services were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>hardware/ckb.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hardware/mcelog.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hardware/usb-wwan.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hardware/video/capture/mwprocapture.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/adb.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/chromium.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/gphoto2.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/java.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/mtr.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/oblogout.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/vim.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/wireshark.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>security/dhparams.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/audio/ympd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/computing/boinc/client.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/continuous-integration/buildbot/master.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/continuous-integration/buildbot/worker.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/continuous-integration/gitlab-runner.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/databases/riak-cs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/databases/stanchion.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/desktops/gnome3/gnome-terminal-server.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/editors/infinoted.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/hardware/illum.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/hardware/trezord.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/logging/journalbeat.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/offlineimap.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/postgrey.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/couchpotato.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/docker-registry.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/errbot.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/geoip-updater.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/gogs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/leaps.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/nix-optimise.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/ssm-agent.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/sssd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/arbtt.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/netdata.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/alertmanager.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/blackbox-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/json-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/nginx-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/node-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/snmp-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/unifi-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/varnish-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/sysstat.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/telegraf.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/vnstat.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/network-filesystems/cachefilesd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/network-filesystems/glusterfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/network-filesystems/ipfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/dante.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/dnscrypt-wrapper.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/fakeroute.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/flannel.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/htpdate.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/miredo.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/nftables.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/powerdns.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/pdns-recursor.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/quagga.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/redsocks.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/wireguard.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/system/cgmanager.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/torrent/opentracker.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/atlassian/confluence.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/atlassian/crowd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/atlassian/jira.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/frab.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/nixbot.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/selfoss.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/quassel-webserver.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/unclutter-xfixes.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/urxvtd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>system/boot/systemd-nspawn.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/ecs-agent.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/lxcfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/openstack/keystone.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>virtualisation/openstack/glance.nix</literal> - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.03-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - Derivations have no <literal>.nativeDrv</literal> nor - <literal>.crossDrv</literal> and are now cross by default, not native. - </para> - </listitem> - <listitem> - <para> - <literal>stdenv.overrides</literal> is now expected to take - <literal>self</literal> and <literal>super</literal> arguments. See - <literal>lib.trivial.extends</literal> for what those parameters - represent. - </para> - </listitem> - <listitem> - <para> - <literal>ansible</literal> now defaults to ansible version 2 as version 1 - has been removed due to a serious - <link - xlink:href="https://www.computest.nl/advisories/CT-2017-0109_Ansible.txt"> - vulnerability</link> unpatched by upstream. - </para> - </listitem> - <listitem> - <para> - <literal>gnome</literal> alias has been removed along with - <literal>gtk</literal>, <literal>gtkmm</literal> and several others. Now - you need to use versioned attributes, like <literal>gnome3</literal>. - </para> - </listitem> - <listitem> - <para> - The attribute name of the Radicale daemon has been changed from - <literal>pythonPackages.radicale</literal> to <literal>radicale</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>stripHash</literal> bash function in - <literal>stdenv</literal> changed according to its documentation; it now - outputs the stripped name to <literal>stdout</literal> instead of putting - it in the variable <literal>strippedName</literal>. - </para> - </listitem> - <listitem> - <para> - PHP now scans for extra configuration .ini files in /etc/php.d instead of - /etc. This prevents accidentally loading non-PHP .ini files that may be in - /etc. - </para> - </listitem> - <listitem> - <para> - Two lone top-level dict dbs moved into <literal>dictdDBs</literal>. This - affects: <literal>dictdWordnet</literal> which is now at - <literal>dictdDBs.wordnet</literal> and <literal>dictdWiktionary</literal> - which is now at <literal>dictdDBs.wiktionary</literal> - </para> - </listitem> - <listitem> - <para> - Parsoid service now uses YAML configuration format. - <literal>service.parsoid.interwikis</literal> is now called - <literal>service.parsoid.wikis</literal> and is a list of either API URLs - or attribute sets as specified in parsoid's documentation. - </para> - </listitem> - <listitem> - <para> - <literal>Ntpd</literal> was replaced by - <literal>systemd-timesyncd</literal> as the default service to synchronize - system time with a remote NTP server. The old behavior can be restored by - setting <literal>services.ntp.enable</literal> to <literal>true</literal>. - Upstream time servers for all NTP implementations are now configured using - <literal>networking.timeServers</literal>. - </para> - </listitem> - <listitem> - <para> - <literal>service.nylon</literal> is now declared using named instances. As - an example: -<programlisting> - services.nylon = { - enable = true; - acceptInterface = "br0"; - bindInterface = "tun1"; - port = 5912; - }; -</programlisting> - should be replaced with: -<programlisting> - services.nylon.myvpn = { - enable = true; - acceptInterface = "br0"; - bindInterface = "tun1"; - port = 5912; - }; -</programlisting> - this enables you to declare a SOCKS proxy for each uplink. - </para> - </listitem> - <listitem> - <para> - <literal>overridePackages</literal> function no longer exists. It is - replaced by - <link - xlink:href="https://nixos.org/nixpkgs/manual/#sec-overlays-install"> - overlays</link>. For example, the following code: -<programlisting> -let - pkgs = import <nixpkgs> {}; -in - pkgs.overridePackages (self: super: ...) -</programlisting> - should be replaced by: -<programlisting> -let - pkgs = import <nixpkgs> {}; -in - import pkgs.path { overlays = [(self: super: ...)]; } -</programlisting> - </para> - </listitem> - <listitem> - <para> - Autoloading connection tracking helpers is now disabled by default. This - default was also changed in the Linux kernel and is considered insecure if - not configured properly in your firewall. If you need connection tracking - helpers (i.e. for active FTP) please enable - <literal>networking.firewall.autoLoadConntrackHelpers</literal> and tune - <literal>networking.firewall.connectionTrackingModules</literal> to suit - your needs. - </para> - </listitem> - <listitem> - <para> - <literal>local_recipient_maps</literal> is not set to empty value by - Postfix service. It's an insecure default as stated by Postfix - documentation. Those who want to retain this setting need to set it via - <literal>services.postfix.extraConfig</literal>. - </para> - </listitem> - <listitem> - <para> - Iputils no longer provide ping6 and traceroute6. The functionality of - these tools has been integrated into ping and traceroute respectively. To - enforce an address family the new flags <literal>-4</literal> and - <literal>-6</literal> have been added. One notable incompatibility is that - specifying an interface (for link-local IPv6 for instance) is no longer - done with the <literal>-I</literal> flag, but by encoding the interface - into the address (<literal>ping fe80::1%eth0</literal>). - </para> - </listitem> - <listitem> - <para> - The socket handling of the <literal>services.rmilter</literal> module has - been fixed and refactored. As rmilter doesn't support binding to more than - one socket, the options <literal>bindUnixSockets</literal> and - <literal>bindInetSockets</literal> have been replaced by - <literal>services.rmilter.bindSocket.*</literal>. The default is still a - unix socket in <literal>/run/rmilter/rmilter.sock</literal>. Refer to the - options documentation for more information. - </para> - </listitem> - <listitem> - <para> - The <literal>fetch*</literal> functions no longer support md5, please use - sha256 instead. - </para> - </listitem> - <listitem> - <para> - The dnscrypt-proxy module interface has been streamlined around the - <option>extraArgs</option> option. Where possible, legacy option - declarations are mapped to <option>extraArgs</option> but will emit - warnings. The <option>resolverList</option> has been outright removed: to - use an unlisted resolver, use the <option>customResolver</option> option. - </para> - </listitem> - <listitem> - <para> - torbrowser now stores local state under - <filename>~/.local/share/tor-browser</filename> by default. Any browser - profile data from the old location, <filename>~/.torbrowser4</filename>, - must be migrated manually. - </para> - </listitem> - <listitem> - <para> - The ihaskell, monetdb, offlineimap and sitecopy services have been - removed. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.03-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para> - Module type system have a new extensible option types feature that allow - to extend certain types, such as enum, through multiple option - declarations of the same option across multiple modules. - </para> - </listitem> - <listitem> - <para> - <literal>jre</literal> now defaults to GTK UI by default. This improves - visual consistency and makes Java follow system font style, improving the - situation on HighDPI displays. This has a cost of increased closure size; - for server and other headless workloads it's recommended to use - <literal>jre_headless</literal>. - </para> - </listitem> - <listitem> - <para> - Python 2.6 interpreter and package set have been removed. - </para> - </listitem> - <listitem> - <para> - The Python 2.7 interpreter does not use modules anymore. Instead, all - CPython interpreters now include the whole standard library except for - `tkinter`, which is available in the Python package set. - </para> - </listitem> - <listitem> - <para> - Python 2.7, 3.5 and 3.6 are now built deterministically and 3.4 mostly. - Minor modifications had to be made to the interpreters in order to - generate deterministic bytecode. This has security implications and is - relevant for those using Python in a <literal>nix-shell</literal>. See the - Nixpkgs manual for details. - </para> - </listitem> - <listitem> - <para> - The Python package sets now use a fixed-point combinator and the sets are - available as attributes of the interpreters. - </para> - </listitem> - <listitem> - <para> - The Python function <literal>buildPythonPackage</literal> has been - improved and can be used to build from Setuptools source, Flit source, and - precompiled Wheels. - </para> - </listitem> - <listitem> - <para> - When adding new or updating current Python libraries, the expressions - should be put in separate files in - <literal>pkgs/development/python-modules</literal> and called from - <literal>python-packages.nix</literal>. - </para> - </listitem> - <listitem> - <para> - The dnscrypt-proxy service supports synchronizing the list of public - resolvers without working DNS resolution. This fixes issues caused by the - resolver list becoming outdated. It also improves the viability of - DNSCrypt only configurations. - </para> - </listitem> - <listitem> - <para> - Containers using bridged networking no longer lose their connection after - changes to the host networking. - </para> - </listitem> - <listitem> - <para> - ZFS supports pool auto scrubbing. - </para> - </listitem> - <listitem> - <para> - The bind DNS utilities (e.g. dig) have been split into their own output - and are now also available in <literal>pkgs.dnsutils</literal> and it is - no longer necessary to pull in all of <literal>bind</literal> to use them. - </para> - </listitem> - <listitem> - <para> - Per-user configuration was moved from <filename>~/.nixpkgs</filename> to - <filename>~/.config/nixpkgs</filename>. The former is still valid for - <filename>config.nix</filename> for backwards compatibility. - </para> - </listitem> - </itemizedlist> - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1709.section.md b/nixos/doc/manual/release-notes/rl-1709.section.md new file mode 100644 index 00000000000..e5af22721b0 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1709.section.md @@ -0,0 +1,316 @@ +# Release 17.09 ("Hummingbird", 2017/09/??) {#sec-release-17.09} + +## Highlights {#sec-release-17.09-highlights} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- The GNOME version is now 3.24. KDE Plasma was upgraded to 5.10, KDE Applications to 17.08.1 and KDE Frameworks to 5.37. + +- The user handling now keeps track of deallocated UIDs/GIDs. When a user or group is revived, this allows it to be allocated the UID/GID it had before. A consequence is that UIDs and GIDs are no longer reused. + +- The module option `services.xserver.xrandrHeads` now causes the first head specified in this list to be set as the primary head. Apart from that, it\'s now possible to also set additional options by using an attribute set, for example: + + ```nix + { services.xserver.xrandrHeads = [ + "HDMI-0" + { + output = "DVI-0"; + primary = true; + monitorConfig = '' + Option "Rotate" "right" + ''; + } + ]; + } + ``` + + This will set the `DVI-0` output to be the primary head, even though `HDMI-0` is the first head in the list. + +- The handling of SSL in the `services.nginx` module has been cleaned up, renaming the misnamed `enableSSL` to `onlySSL` which reflects its original intention. This is not to be used with the already existing `forceSSL` which creates a second non-SSL virtual host redirecting to the SSL virtual host. This by chance had worked earlier due to specific implementation details. In case you had specified both please remove the `enableSSL` option to keep the previous behaviour. + + Another `addSSL` option has been introduced to configure both a non-SSL virtual host and an SSL virtual host with the same configuration. + + Options to configure `resolver` options and `upstream` blocks have been introduced. See their information for further details. + + The `port` option has been replaced by a more generic `listen` option which makes it possible to specify multiple addresses, ports and SSL configs dependant on the new SSL handling mentioned above. + +## New Services {#sec-release-17.09-new-services} + +The following new services were added since the last release: + +- `config/fonts/fontconfig-penultimate.nix` + +- `config/fonts/fontconfig-ultimate.nix` + +- `config/terminfo.nix` + +- `hardware/sensor/iio.nix` + +- `hardware/nitrokey.nix` + +- `hardware/raid/hpsa.nix` + +- `programs/browserpass.nix` + +- `programs/gnupg.nix` + +- `programs/qt5ct.nix` + +- `programs/slock.nix` + +- `programs/thefuck.nix` + +- `security/auditd.nix` + +- `security/lock-kernel-modules.nix` + +- `service-managers/docker.nix` + +- `service-managers/trivial.nix` + +- `services/admin/salt/master.nix` + +- `services/admin/salt/minion.nix` + +- `services/audio/slimserver.nix` + +- `services/cluster/kubernetes/default.nix` + +- `services/cluster/kubernetes/dns.nix` + +- `services/cluster/kubernetes/dashboard.nix` + +- `services/continuous-integration/hail.nix` + +- `services/databases/clickhouse.nix` + +- `services/databases/postage.nix` + +- `services/desktops/gnome3/gnome-disks.nix` + +- `services/desktops/gnome3/gpaste.nix` + +- `services/logging/SystemdJournal2Gelf.nix` + +- `services/logging/heartbeat.nix` + +- `services/logging/journalwatch.nix` + +- `services/logging/syslogd.nix` + +- `services/mail/mailhog.nix` + +- `services/mail/nullmailer.nix` + +- `services/misc/airsonic.nix` + +- `services/misc/autorandr.nix` + +- `services/misc/exhibitor.nix` + +- `services/misc/fstrim.nix` + +- `services/misc/gollum.nix` + +- `services/misc/irkerd.nix` + +- `services/misc/jackett.nix` + +- `services/misc/radarr.nix` + +- `services/misc/snapper.nix` + +- `services/monitoring/osquery.nix` + +- `services/monitoring/prometheus/collectd-exporter.nix` + +- `services/monitoring/prometheus/fritzbox-exporter.nix` + +- `services/network-filesystems/kbfs.nix` + +- `services/networking/dnscache.nix` + +- `services/networking/fireqos.nix` + +- `services/networking/iwd.nix` + +- `services/networking/keepalived/default.nix` + +- `services/networking/keybase.nix` + +- `services/networking/lldpd.nix` + +- `services/networking/matterbridge.nix` + +- `services/networking/squid.nix` + +- `services/networking/tinydns.nix` + +- `services/networking/xrdp.nix` + +- `services/security/shibboleth-sp.nix` + +- `services/security/sks.nix` + +- `services/security/sshguard.nix` + +- `services/security/torify.nix` + +- `services/security/usbguard.nix` + +- `services/security/vault.nix` + +- `services/system/earlyoom.nix` + +- `services/system/saslauthd.nix` + +- `services/web-apps/nexus.nix` + +- `services/web-apps/pgpkeyserver-lite.nix` + +- `services/web-apps/piwik.nix` + +- `services/web-servers/lighttpd/collectd.nix` + +- `services/web-servers/minio.nix` + +- `services/x11/display-managers/xpra.nix` + +- `services/x11/xautolock.nix` + +- `tasks/filesystems/bcachefs.nix` + +- `tasks/powertop.nix` + +## Backward Incompatibilities {#sec-release-17.09-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- **In an Qemu-based virtualization environment, the network interface names changed from i.e. `enp0s3` to `ens3`.** + + This is due to a kernel configuration change. The new naming is consistent with those of other Linux distributions with systemd. See [\#29197](https://github.com/NixOS/nixpkgs/issues/29197) for more information. + + A machine is affected if the `virt-what` tool either returns `qemu` or `kvm` _and_ has interface names used in any part of its NixOS configuration, in particular if a static network configuration with `networking.interfaces` is used. + + Before rebooting affected machines, please ensure: + + - Change the interface names in your NixOS configuration. The first interface will be called `ens3`, the second one `ens8` and starting from there incremented by 1. + + - After changing the interface names, rebuild your system with `nixos-rebuild boot` to activate the new configuration after a reboot. If you switch to the new configuration right away you might lose network connectivity! If using `nixops`, deploy with `nixops deploy --force-reboot`. + +- The following changes apply if the `stateVersion` is changed to 17.09 or higher. For `stateVersion = "17.03"` or lower the old behavior is preserved. + + - The `postgres` default version was changed from 9.5 to 9.6. + + - The `postgres` superuser name has changed from `root` to `postgres` to more closely follow what other Linux distributions are doing. + + - The `postgres` default `dataDir` has changed from `/var/db/postgres` to `/var/lib/postgresql/$psqlSchema` where \$psqlSchema is 9.6 for example. + + - The `mysql` default `dataDir` has changed from `/var/mysql` to `/var/lib/mysql`. + + - Radicale\'s default package has changed from 1.x to 2.x. Instructions to migrate can be found [ here ](http://radicale.org/1to2/). It is also possible to use the newer version by setting the `package` to `radicale2`, which is done automatically when `stateVersion` is 17.09 or higher. The `extraArgs` option has been added to allow passing the data migration arguments specified in the instructions; see the `radicale.nix` NixOS test for an example migration. + +- The `aiccu` package was removed. This is due to SixXS [ sunsetting](https://www.sixxs.net/main/) its IPv6 tunnel. + +- The `fanctl` package and `fan` module have been removed due to the developers not upstreaming their iproute2 patches and lagging with compatibility to recent iproute2 versions. + +- Top-level `idea` package collection was renamed. All JetBrains IDEs are now at `jetbrains`. + +- `flexget`\'s state database cannot be upgraded to its new internal format, requiring removal of any existing `db-config.sqlite` which will be automatically recreated. + +- The `ipfs` service now doesn\'t ignore the `dataDir` option anymore. If you\'ve ever set this option to anything other than the default you\'ll have to either unset it (so the default gets used) or migrate the old data manually with + + ```ShellSession + dataDir=<valueOfDataDir> + mv /var/lib/ipfs/.ipfs/* $dataDir + rmdir /var/lib/ipfs/.ipfs + ``` + +- The `caddy` service was previously using an extra `.caddy` directory in the data directory specified with the `dataDir` option. The contents of the `.caddy` directory are now expected to be in the `dataDir`. + +- The `ssh-agent` user service is not started by default anymore. Use `programs.ssh.startAgent` to enable it if needed. There is also a new `programs.gnupg.agent` module that creates a `gpg-agent` user service. It can also serve as a SSH agent if `enableSSHSupport` is set. + +- The `services.tinc.networks.<name>.listenAddress` option had a misleading name that did not correspond to its behavior. It now correctly defines the ip to listen for incoming connections on. To keep the previous behaviour, use `services.tinc.networks.<name>.bindToAddress` instead. Refer to the description of the options for more details. + +- `tlsdate` package and module were removed. This is due to the project being dead and not building with openssl 1.1. + +- `wvdial` package and module were removed. This is due to the project being dead and not building with openssl 1.1. + +- `cc-wrapper`\'s setup-hook now exports a number of environment variables corresponding to binutils binaries, (e.g. `LD`, `STRIP`, `RANLIB`, etc). This is done to prevent packages\' build systems guessing, which is harder to predict, especially when cross-compiling. However, some packages have broken due to this---their build systems either not supporting, or claiming to support without adequate testing, taking such environment variables as parameters. + +- `services.firefox.syncserver` now runs by default as a non-root user. To accomodate this change, the default sqlite database location has also been changed. Migration should work automatically. Refer to the description of the options for more details. + +- The `compiz` window manager and package was removed. The system support had been broken for several years. + +- Touchpad support should now be enabled through `libinput` as `synaptics` is now deprecated. See the option `services.xserver.libinput.enable`. + +- grsecurity/PaX support has been dropped, following upstream\'s decision to cease free support. See [ upstream\'s announcement](https://grsecurity.net/passing_the_baton.php) for more information. No complete replacement for grsecurity/PaX is available presently. + +- `services.mysql` now has declarative configuration of databases and users with the `ensureDatabases` and `ensureUsers` options. + + These options will never delete existing databases and users, especially not when the value of the options are changed. + + The MySQL users will be identified using [ Unix socket authentication](https://mariadb.com/kb/en/library/authentication-plugin-unix-socket/). This authenticates the Unix user with the same name only, and that without the need for a password. + + If you have previously created a MySQL `root` user _with a password_, you will need to add `root` user for unix socket authentication before using the new options. This can be done by running the following SQL script: + + ```SQL + CREATE USER 'root'@'%' IDENTIFIED BY ''; + GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' WITH GRANT OPTION; + FLUSH PRIVILEGES; + + -- Optionally, delete the password-authenticated user: + -- DROP USER 'root'@'localhost'; + ``` + +- `services.mysqlBackup` now works by default without any user setup, including for users other than `mysql`. + + By default, the `mysql` user is no longer the user which performs the backup. Instead a system account `mysqlbackup` is used. + + The `mysqlBackup` service is also now using systemd timers instead of `cron`. + + Therefore, the `services.mysqlBackup.period` option no longer exists, and has been replaced with `services.mysqlBackup.calendar`, which is in the format of [systemd.time(7)](https://www.freedesktop.org/software/systemd/man/systemd.time.html#Calendar%20Events). + + If you expect to be sent an e-mail when the backup fails, consider using a script which monitors the systemd journal for errors. Regretfully, at present there is no built-in functionality for this. + + You can check that backups still work by running `systemctl start mysql-backup` then `systemctl status mysql-backup`. + +- Templated systemd services e.g `container@name` are now handled currectly when switching to a new configuration, resulting in them being reloaded. + +- Steam: the `newStdcpp` parameter was removed and should not be needed anymore. + +- Redis has been updated to version 4 which mandates a cluster mass-restart, due to changes in the network handling, in order to ensure compatibility with networks NATing traffic. + +## Other Notable Changes {#sec-release-17.09-notable-changes} + +- Modules can now be disabled by using [ disabledModules](https://nixos.org/nixpkgs/manual/#sec-replace-modules), allowing another to take it\'s place. This can be used to import a set of modules from another channel while keeping the rest of the system on a stable release. + +- Updated to FreeType 2.7.1, including a new TrueType engine. The new engine replaces the Infinality engine which was the default in NixOS. The default font rendering settings are now provided by fontconfig-penultimate, replacing fontconfig-ultimate; the new defaults are less invasive and provide rendering that is more consistent with other systems and hopefully with each font designer\'s intent. Some system-wide configuration has been removed from the Fontconfig NixOS module where user Fontconfig settings are available. + +- ZFS/SPL have been updated to 0.7.0, `zfsUnstable, splUnstable` have therefore been removed. + +- The `time.timeZone` option now allows the value `null` in addition to timezone strings. This value allows changing the timezone of a system imperatively using `timedatectl set-timezone`. The default timezone is still UTC. + +- Nixpkgs overlays may now be specified with a file as well as a directory. The value of `<nixpkgs-overlays>` may be a file, and `~/.config/nixpkgs/overlays.nix` can be used instead of the `~/.config/nixpkgs/overlays` directory. + + See the overlays chapter of the Nixpkgs manual for more details. + +- Definitions for `/etc/hosts` can now be specified declaratively with `networking.hosts`. + +- Two new options have been added to the installer loader, in addition to the default having changed. The kernel log verbosity has been lowered to the upstream default for the default options, in order to not spam the console when e.g. joining a network. + + This therefore leads to adding a new `debug` option to set the log level to the previous verbose mode, to make debugging easier, but still accessible easily. + + Additionally a `copytoram` option has been added, which makes it possible to remove the install medium after booting. This allows tethering from your phone after booting from it. + +- `services.gitlab-runner.configOptions` has been added to specify the configuration of gitlab-runners declaratively. + +- `services.jenkins.plugins` has been added to install plugins easily, this can be generated with jenkinsPlugins2nix. + +- `services.postfix.config` has been added to specify the main.cf with NixOS options. Additionally other options have been added to the postfix module and has been improved further. + +- The GitLab package and module have been updated to the latest 10.0 release. + +- The `systemd-boot` boot loader now lists the NixOS version, kernel version and build date of all bootable generations. + +- The dnscrypt-proxy service now defaults to using a random upstream resolver, selected from the list of public non-logging resolvers with DNSSEC support. Existing configurations can be migrated to this mode of operation by omitting the `services.dnscrypt-proxy.resolverName` option or setting it to `"random"`. diff --git a/nixos/doc/manual/release-notes/rl-1709.xml b/nixos/doc/manual/release-notes/rl-1709.xml deleted file mode 100644 index 795c51d2923..00000000000 --- a/nixos/doc/manual/release-notes/rl-1709.xml +++ /dev/null @@ -1,899 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.09"> - <title>Release 17.09 (“Hummingbird”, 2017/09/??)</title> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.09-highlights"> - <title>Highlights</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - The GNOME version is now 3.24. KDE Plasma was upgraded to 5.10, KDE - Applications to 17.08.1 and KDE Frameworks to 5.37. - </para> - </listitem> - <listitem> - <para> - The user handling now keeps track of deallocated UIDs/GIDs. When a user or - group is revived, this allows it to be allocated the UID/GID it had - before. A consequence is that UIDs and GIDs are no longer reused. - </para> - </listitem> - <listitem> - <para> - The module option <option>services.xserver.xrandrHeads</option> now causes - the first head specified in this list to be set as the primary head. Apart - from that, it's now possible to also set additional options by using an - attribute set, for example: -<programlisting> -{ services.xserver.xrandrHeads = [ - "HDMI-0" - { - output = "DVI-0"; - primary = true; - monitorConfig = '' - Option "Rotate" "right" - ''; - } - ]; -} -</programlisting> - This will set the <literal>DVI-0</literal> output to be the primary head, - even though <literal>HDMI-0</literal> is the first head in the list. - </para> - </listitem> - <listitem> - <para> - The handling of SSL in the <literal>services.nginx</literal> module has - been cleaned up, renaming the misnamed <literal>enableSSL</literal> to - <literal>onlySSL</literal> which reflects its original intention. This is - not to be used with the already existing <literal>forceSSL</literal> which - creates a second non-SSL virtual host redirecting to the SSL virtual host. - This by chance had worked earlier due to specific implementation details. - In case you had specified both please remove the - <literal>enableSSL</literal> option to keep the previous behaviour. - </para> - <para> - Another <literal>addSSL</literal> option has been introduced to configure - both a non-SSL virtual host and an SSL virtual host with the same - configuration. - </para> - <para> - Options to configure <literal>resolver</literal> options and - <literal>upstream</literal> blocks have been introduced. See their - information for further details. - </para> - <para> - The <literal>port</literal> option has been replaced by a more generic - <literal>listen</literal> option which makes it possible to specify - multiple addresses, ports and SSL configs dependant on the new SSL - handling mentioned above. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.09-new-services"> - <title>New Services</title> - - <para> - The following new services were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>config/fonts/fontconfig-penultimate.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>config/fonts/fontconfig-ultimate.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>config/terminfo.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hardware/sensor/iio.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hardware/nitrokey.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>hardware/raid/hpsa.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/browserpass.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/gnupg.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/qt5ct.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/slock.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>programs/thefuck.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>security/auditd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>security/lock-kernel-modules.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>service-managers/docker.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>service-managers/trivial.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/admin/salt/master.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/admin/salt/minion.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/audio/slimserver.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/cluster/kubernetes/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/cluster/kubernetes/dns.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/cluster/kubernetes/dashboard.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/continuous-integration/hail.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/databases/clickhouse.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/databases/postage.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/desktops/gnome3/gnome-disks.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/desktops/gnome3/gpaste.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/logging/SystemdJournal2Gelf.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/logging/heartbeat.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/logging/journalwatch.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/logging/syslogd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/mailhog.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/mail/nullmailer.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/airsonic.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/autorandr.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/exhibitor.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/fstrim.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/gollum.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/irkerd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/jackett.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/radarr.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/misc/snapper.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/osquery.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/collectd-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/monitoring/prometheus/fritzbox-exporter.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/network-filesystems/kbfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/dnscache.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/fireqos.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/iwd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/keepalived/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/keybase.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/lldpd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/matterbridge.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/squid.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/tinydns.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/networking/xrdp.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/shibboleth-sp.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/sks.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/sshguard.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/torify.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/usbguard.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/security/vault.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/system/earlyoom.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/system/saslauthd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/nexus.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/pgpkeyserver-lite.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-apps/piwik.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-servers/lighttpd/collectd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/web-servers/minio.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/display-managers/xpra.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>services/x11/xautolock.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>tasks/filesystems/bcachefs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>tasks/powertop.nix</literal> - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.09-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - <emphasis role="strong"> In an Qemu-based virtualization environment, the - network interface names changed from i.e. <literal>enp0s3</literal> to - <literal>ens3</literal>. </emphasis> - </para> - <para> - This is due to a kernel configuration change. The new naming is consistent - with those of other Linux distributions with systemd. See - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/29197">#29197</link> - for more information. - </para> - <para> - A machine is affected if the <literal>virt-what</literal> tool either - returns <literal>qemu</literal> or <literal>kvm</literal> - <emphasis>and</emphasis> has interface names used in any part of its NixOS - configuration, in particular if a static network configuration with - <literal>networking.interfaces</literal> is used. - </para> - <para> - Before rebooting affected machines, please ensure: - <itemizedlist> - <listitem> - <para> - Change the interface names in your NixOS configuration. The first - interface will be called <literal>ens3</literal>, the second one - <literal>ens8</literal> and starting from there incremented by 1. - </para> - </listitem> - <listitem> - <para> - After changing the interface names, rebuild your system with - <literal>nixos-rebuild boot</literal> to activate the new configuration - after a reboot. If you switch to the new configuration right away you - might lose network connectivity! If using <literal>nixops</literal>, - deploy with <literal>nixops deploy --force-reboot</literal>. - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - The following changes apply if the <literal>stateVersion</literal> is - changed to 17.09 or higher. For <literal>stateVersion = "17.03"</literal> - or lower the old behavior is preserved. - </para> - <itemizedlist> - <listitem> - <para> - The <literal>postgres</literal> default version was changed from 9.5 to - 9.6. - </para> - </listitem> - <listitem> - <para> - The <literal>postgres</literal> superuser name has changed from - <literal>root</literal> to <literal>postgres</literal> to more closely - follow what other Linux distributions are doing. - </para> - </listitem> - <listitem> - <para> - The <literal>postgres</literal> default <literal>dataDir</literal> has - changed from <literal>/var/db/postgres</literal> to - <literal>/var/lib/postgresql/$psqlSchema</literal> where $psqlSchema is - 9.6 for example. - </para> - </listitem> - <listitem> - <para> - The <literal>mysql</literal> default <literal>dataDir</literal> has - changed from <literal>/var/mysql</literal> to - <literal>/var/lib/mysql</literal>. - </para> - </listitem> - <listitem> - <para> - Radicale's default package has changed from 1.x to 2.x. Instructions to - migrate can be found <link xlink:href="http://radicale.org/1to2/"> here - </link>. It is also possible to use the newer version by setting the - <literal>package</literal> to <literal>radicale2</literal>, which is - done automatically when <literal>stateVersion</literal> is 17.09 or - higher. The <literal>extraArgs</literal> option has been added to allow - passing the data migration arguments specified in the instructions; see - the - <filename xlink:href="https://github.com/NixOS/nixpkgs/blob/master/nixos/tests/radicale.nix">radicale.nix</filename> - NixOS test for an example migration. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - The <literal>aiccu</literal> package was removed. This is due to SixXS - <link xlink:href="https://www.sixxs.net/main/"> sunsetting</link> its IPv6 - tunnel. - </para> - </listitem> - <listitem> - <para> - The <literal>fanctl</literal> package and <literal>fan</literal> module - have been removed due to the developers not upstreaming their iproute2 - patches and lagging with compatibility to recent iproute2 versions. - </para> - </listitem> - <listitem> - <para> - Top-level <literal>idea</literal> package collection was renamed. All - JetBrains IDEs are now at <literal>jetbrains</literal>. - </para> - </listitem> - <listitem> - <para> - <literal>flexget</literal>'s state database cannot be upgraded to its new - internal format, requiring removal of any existing - <literal>db-config.sqlite</literal> which will be automatically recreated. - </para> - </listitem> - <listitem> - <para> - The <literal>ipfs</literal> service now doesn't ignore the - <literal>dataDir</literal> option anymore. If you've ever set this option - to anything other than the default you'll have to either unset it (so the - default gets used) or migrate the old data manually with -<programlisting> -dataDir=<valueOfDataDir> -mv /var/lib/ipfs/.ipfs/* $dataDir -rmdir /var/lib/ipfs/.ipfs -</programlisting> - </para> - </listitem> - <listitem> - <para> - The <literal>caddy</literal> service was previously using an extra - <literal>.caddy</literal> directory in the data directory specified with - the <literal>dataDir</literal> option. The contents of the - <literal>.caddy</literal> directory are now expected to be in the - <literal>dataDir</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>ssh-agent</literal> user service is not started by default - anymore. Use <literal>programs.ssh.startAgent</literal> to enable it if - needed. There is also a new <literal>programs.gnupg.agent</literal> module - that creates a <literal>gpg-agent</literal> user service. It can also - serve as a SSH agent if <literal>enableSSHSupport</literal> is set. - </para> - </listitem> - <listitem> - <para> - The <literal>services.tinc.networks.<name>.listenAddress</literal> - option had a misleading name that did not correspond to its behavior. It - now correctly defines the ip to listen for incoming connections on. To - keep the previous behaviour, use - <literal>services.tinc.networks.<name>.bindToAddress</literal> - instead. Refer to the description of the options for more details. - </para> - </listitem> - <listitem> - <para> - <literal>tlsdate</literal> package and module were removed. This is due to - the project being dead and not building with openssl 1.1. - </para> - </listitem> - <listitem> - <para> - <literal>wvdial</literal> package and module were removed. This is due to - the project being dead and not building with openssl 1.1. - </para> - </listitem> - <listitem> - <para> - <literal>cc-wrapper</literal>'s setup-hook now exports a number of - environment variables corresponding to binutils binaries, (e.g. - <envar>LD</envar>, <envar>STRIP</envar>, <envar>RANLIB</envar>, etc). This - is done to prevent packages' build systems guessing, which is harder to - predict, especially when cross-compiling. However, some packages have - broken due to this—their build systems either not supporting, or - claiming to support without adequate testing, taking such environment - variables as parameters. - </para> - </listitem> - <listitem> - <para> - <literal>services.firefox.syncserver</literal> now runs by default as a - non-root user. To accomodate this change, the default sqlite database - location has also been changed. Migration should work automatically. Refer - to the description of the options for more details. - </para> - </listitem> - <listitem> - <para> - The <literal>compiz</literal> window manager and package was removed. The - system support had been broken for several years. - </para> - </listitem> - <listitem> - <para> - Touchpad support should now be enabled through <literal>libinput</literal> - as <literal>synaptics</literal> is now deprecated. See the option - <literal>services.xserver.libinput.enable</literal>. - </para> - </listitem> - <listitem> - <para> - grsecurity/PaX support has been dropped, following upstream's decision to - cease free support. See - <link xlink:href="https://grsecurity.net/passing_the_baton.php"> - upstream's announcement</link> for more information. No complete - replacement for grsecurity/PaX is available presently. - </para> - </listitem> - <listitem> - <para> - <literal>services.mysql</literal> now has declarative configuration of - databases and users with the <literal>ensureDatabases</literal> and - <literal>ensureUsers</literal> options. - </para> - <para> - These options will never delete existing databases and users, especially - not when the value of the options are changed. - </para> - <para> - The MySQL users will be identified using - <link xlink:href="https://mariadb.com/kb/en/library/authentication-plugin-unix-socket/"> - Unix socket authentication</link>. This authenticates the Unix user with - the same name only, and that without the need for a password. - </para> - <para> - If you have previously created a MySQL <literal>root</literal> user - <emphasis>with a password</emphasis>, you will need to add - <literal>root</literal> user for unix socket authentication before using - the new options. This can be done by running the following SQL script: -<programlisting language="sql"> -CREATE USER 'root'@'%' IDENTIFIED BY ''; -GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' WITH GRANT OPTION; -FLUSH PRIVILEGES; - --- Optionally, delete the password-authenticated user: --- DROP USER 'root'@'localhost'; -</programlisting> - </para> - </listitem> - <listitem> - <para> - <literal>services.mysqlBackup</literal> now works by default without any - user setup, including for users other than <literal>mysql</literal>. - </para> - <para> - By default, the <literal>mysql</literal> user is no longer the user which - performs the backup. Instead a system account - <literal>mysqlbackup</literal> is used. - </para> - <para> - The <literal>mysqlBackup</literal> service is also now using systemd - timers instead of <literal>cron</literal>. - </para> - <para> - Therefore, the <literal>services.mysqlBackup.period</literal> option no - longer exists, and has been replaced with - <literal>services.mysqlBackup.calendar</literal>, which is in the format - of - <link - xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.time.html#Calendar%20Events">systemd.time(7)</link>. - </para> - <para> - If you expect to be sent an e-mail when the backup fails, consider using a - script which monitors the systemd journal for errors. Regretfully, at - present there is no built-in functionality for this. - </para> - <para> - You can check that backups still work by running <command>systemctl start - mysql-backup</command> then <command>systemctl status - mysql-backup</command>. - </para> - </listitem> - <listitem> - <para> - Templated systemd services e.g <literal>container@name</literal> are now - handled currectly when switching to a new configuration, resulting in them - being reloaded. - </para> - </listitem> - <listitem> - <para> - Steam: the <literal>newStdcpp</literal> parameter was removed and should - not be needed anymore. - </para> - </listitem> - <listitem> - <para> - Redis has been updated to version 4 which mandates a cluster mass-restart, - due to changes in the network handling, in order to ensure compatibility - with networks NATing traffic. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-17.09-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para> - Modules can now be disabled by using - <link - xlink:href="https://nixos.org/nixpkgs/manual/#sec-replace-modules"> - disabledModules</link>, allowing another to take it's place. This can be - used to import a set of modules from another channel while keeping the - rest of the system on a stable release. - </para> - </listitem> - <listitem> - <para> - Updated to FreeType 2.7.1, including a new TrueType engine. The new engine - replaces the Infinality engine which was the default in NixOS. The default - font rendering settings are now provided by fontconfig-penultimate, - replacing fontconfig-ultimate; the new defaults are less invasive and - provide rendering that is more consistent with other systems and hopefully - with each font designer's intent. Some system-wide configuration has been - removed from the Fontconfig NixOS module where user Fontconfig settings - are available. - </para> - </listitem> - <listitem> - <para> - ZFS/SPL have been updated to 0.7.0, <literal>zfsUnstable, - splUnstable</literal> have therefore been removed. - </para> - </listitem> - <listitem> - <para> - The <option>time.timeZone</option> option now allows the value - <literal>null</literal> in addition to timezone strings. This value allows - changing the timezone of a system imperatively using <command>timedatectl - set-timezone</command>. The default timezone is still UTC. - </para> - </listitem> - <listitem> - <para> - Nixpkgs overlays may now be specified with a file as well as a directory. - The value of <literal><nixpkgs-overlays></literal> may be a file, and - <filename>~/.config/nixpkgs/overlays.nix</filename> can be used instead of - the <filename>~/.config/nixpkgs/overlays</filename> directory. - </para> - <para> - See the overlays chapter of the Nixpkgs manual for more details. - </para> - </listitem> - <listitem> - <para> - Definitions for <filename>/etc/hosts</filename> can now be specified - declaratively with <literal>networking.hosts</literal>. - </para> - </listitem> - <listitem> - <para> - Two new options have been added to the installer loader, in addition to - the default having changed. The kernel log verbosity has been lowered to - the upstream default for the default options, in order to not spam the - console when e.g. joining a network. - </para> - <para> - This therefore leads to adding a new <literal>debug</literal> option to - set the log level to the previous verbose mode, to make debugging easier, - but still accessible easily. - </para> - <para> - Additionally a <literal>copytoram</literal> option has been added, which - makes it possible to remove the install medium after booting. This allows - tethering from your phone after booting from it. - </para> - </listitem> - <listitem> - <para> - <literal>services.gitlab-runner.configOptions</literal> has been added to - specify the configuration of gitlab-runners declaratively. - </para> - </listitem> - <listitem> - <para> - <literal>services.jenkins.plugins</literal> has been added to install - plugins easily, this can be generated with jenkinsPlugins2nix. - </para> - </listitem> - <listitem> - <para> - <literal>services.postfix.config</literal> has been added to specify the - main.cf with NixOS options. Additionally other options have been added to - the postfix module and has been improved further. - </para> - </listitem> - <listitem> - <para> - The GitLab package and module have been updated to the latest 10.0 - release. - </para> - </listitem> - <listitem> - <para> - The <literal>systemd-boot</literal> boot loader now lists the NixOS - version, kernel version and build date of all bootable generations. - </para> - </listitem> - <listitem> - <para> - The dnscrypt-proxy service now defaults to using a random upstream - resolver, selected from the list of public non-logging resolvers with - DNSSEC support. Existing configurations can be migrated to this mode of - operation by omitting the - <option>services.dnscrypt-proxy.resolverName</option> option or setting it - to <literal>"random"</literal>. - </para> - </listitem> - </itemizedlist> - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1803.section.md b/nixos/doc/manual/release-notes/rl-1803.section.md new file mode 100644 index 00000000000..e4e46798104 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1803.section.md @@ -0,0 +1,284 @@ +# Release 18.03 ("Impala", 2018/04/04) {#sec-release-18.03} + +## Highlights {#sec-release-18.03-highlights} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- End of support is planned for end of October 2018, handing over to 18.09. + +- Platform support: x86_64-linux and x86_64-darwin since release time (the latter isn\'t NixOS, really). Binaries for aarch64-linux are available, but no channel exists yet, as it\'s waiting for some test fixes, etc. + +- Nix now defaults to 2.0; see its [release notes](https://nixos.org/nix/manual/#ssec-relnotes-2.0). + +- Core version changes: linux: 4.9 -\> 4.14, glibc: 2.25 -\> 2.26, gcc: 6 -\> 7, systemd: 234 -\> 237. + +- Desktop version changes: gnome: 3.24 -\> 3.26, (KDE) plasma-desktop: 5.10 -\> 5.12. + +- MariaDB 10.2, updated from 10.1, is now the default MySQL implementation. While upgrading a few changes have been made to the infrastructure involved: + + - `libmysql` has been deprecated, please use `mysql.connector-c` instead, a compatibility passthru has been added to the MySQL packages. + + - The `mysql57` package has a new `static` output containing the static libraries including `libmysqld.a` + +- PHP now defaults to PHP 7.2, updated from 7.1. + +## New Services {#sec-release-18.03-new-services} + +The following new services were added since the last release: + +- `./config/krb5/default.nix` + +- `./hardware/digitalbitbox.nix` + +- `./misc/label.nix` + +- `./programs/ccache.nix` + +- `./programs/criu.nix` + +- `./programs/digitalbitbox/default.nix` + +- `./programs/less.nix` + +- `./programs/npm.nix` + +- `./programs/plotinus.nix` + +- `./programs/rootston.nix` + +- `./programs/systemtap.nix` + +- `./programs/sway.nix` + +- `./programs/udevil.nix` + +- `./programs/way-cooler.nix` + +- `./programs/yabar.nix` + +- `./programs/zsh/zsh-autoenv.nix` + +- `./services/backup/borgbackup.nix` + +- `./services/backup/crashplan-small-business.nix` + +- `./services/desktops/dleyna-renderer.nix` + +- `./services/desktops/dleyna-server.nix` + +- `./services/desktops/pipewire.nix` + +- `./services/desktops/gnome3/chrome-gnome-shell.nix` + +- `./services/desktops/gnome3/tracker-miners.nix` + +- `./services/hardware/fwupd.nix` + +- `./services/hardware/interception-tools.nix` + +- `./services/hardware/u2f.nix` + +- `./services/hardware/usbmuxd.nix` + +- `./services/mail/clamsmtp.nix` + +- `./services/mail/dkimproxy-out.nix` + +- `./services/mail/pfix-srsd.nix` + +- `./services/misc/gitea.nix` + +- `./services/misc/home-assistant.nix` + +- `./services/misc/ihaskell.nix` + +- `./services/misc/logkeys.nix` + +- `./services/misc/novacomd.nix` + +- `./services/misc/osrm.nix` + +- `./services/misc/plexpy.nix` + +- `./services/misc/pykms.nix` + +- `./services/misc/tzupdate.nix` + +- `./services/monitoring/fusion-inventory.nix` + +- `./services/monitoring/prometheus/exporters.nix` + +- `./services/network-filesystems/beegfs.nix` + +- `./services/network-filesystems/davfs2.nix` + +- `./services/network-filesystems/openafs/client.nix` + +- `./services/network-filesystems/openafs/server.nix` + +- `./services/network-filesystems/ceph.nix` + +- `./services/networking/aria2.nix` + +- `./services/networking/monero.nix` + +- `./services/networking/nghttpx/default.nix` + +- `./services/networking/nixops-dns.nix` + +- `./services/networking/rxe.nix` + +- `./services/networking/stunnel.nix` + +- `./services/web-apps/matomo.nix` + +- `./services/web-apps/restya-board.nix` + +- `./services/web-servers/mighttpd2.nix` + +- `./services/x11/fractalart.nix` + +- `./system/boot/binfmt.nix` + +- `./system/boot/grow-partition.nix` + +- `./tasks/filesystems/ecryptfs.nix` + +- `./virtualisation/hyperv-guest.nix` + +## Backward Incompatibilities {#sec-release-18.03-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- `sound.enable` now defaults to false. + +- Dollar signs in options under `services.postfix` are passed verbatim to Postfix, which will interpret them as the beginning of a parameter expression. This was already true for string-valued options in the previous release, but not for list-valued options. If you need to pass literal dollar signs through Postfix, double them. + +- The `postage` package (for web-based PostgreSQL administration) has been renamed to `pgmanage`. The corresponding module has also been renamed. To migrate please rename all `services.postage` options to `services.pgmanage`. + +- Package attributes starting with a digit have been prefixed with an underscore sign. This is to avoid quoting in the configuration and other issues with command-line tools like `nix-env`. The change affects the following packages: + + - `2048-in-terminal` → `_2048-in-terminal` + + - `90secondportraits` → `_90secondportraits` + + - `2bwm` → `_2bwm` + + - `389-ds-base` → `_389-ds-base` + +- **The OpenSSH service no longer enables support for DSA keys by default, which could cause a system lock out. Update your keys or, unfavorably, re-enable DSA support manually.** + + DSA support was [deprecated in OpenSSH 7.0](https://www.openssh.com/legacy.html), due to it being too weak. To re-enable support, add `PubkeyAcceptedKeyTypes +ssh-dss` to the end of your `services.openssh.extraConfig`. + + After updating the keys to be stronger, anyone still on a pre-17.03 version is safe to jump to 17.03, as vetted [here](https://search.nix.gsc.io/?q=stateVersion). + +- The `openssh` package now includes Kerberos support by default; the `openssh_with_kerberos` package is now a deprecated alias. If you do not want Kerberos support, you can do `openssh.override { withKerberos = false; }`. Note, this also applies to the `openssh_hpn` package. + +- `cc-wrapper` has been split in two; there is now also a `bintools-wrapper`. The most commonly used files in `nix-support` are now split between the two wrappers. Some commonly used ones, like `nix-support/dynamic-linker`, are duplicated for backwards compatability, even though they rightly belong only in `bintools-wrapper`. Other more obscure ones are just moved. + +- The propagation logic has been changed. The new logic, along with new types of dependencies that go with, is thoroughly documented in the \"Specifying dependencies\" section of the \"Standard Environment\" chapter of the nixpkgs manual. The old logic isn\'t but is easy to describe: dependencies were propagated as the same type of dependency no matter what. In practice, that means that many `propagatedNativeBuildInputs` should instead be `propagatedBuildInputs`. Thankfully, that was and is the least used type of dependency. Also, it means that some `propagatedBuildInputs` should instead be `depsTargetTargetPropagated`. Other types dependencies should be unaffected. + +- `lib.addPassthru drv passthru` is removed. Use `lib.extendDerivation true passthru drv` instead. + +- The `memcached` service no longer accept dynamic socket paths via `services.memcached.socket`. Unix sockets can be still enabled by `services.memcached.enableUnixSocket` and will be accessible at `/run/memcached/memcached.sock`. + +- The `hardware.amdHybridGraphics.disable` option was removed for lack of a maintainer. If you still need this module, you may wish to include a copy of it from an older version of nixos in your imports. + +- The merging of config options for `services.postfix.config` was buggy. Previously, if other options in the Postfix module like `services.postfix.useSrs` were set and the user set config options that were also set by such options, the resulting config wouldn\'t include all options that were needed. They are now merged correctly. If config options need to be overridden, `lib.mkForce` or `lib.mkOverride` can be used. + +- The following changes apply if the `stateVersion` is changed to 18.03 or higher. For `stateVersion = "17.09"` or lower the old behavior is preserved. + + - `matrix-synapse` uses postgresql by default instead of sqlite. Migration instructions can be found [ here ](https://github.com/matrix-org/synapse/blob/master/docs/postgres.rst#porting-from-sqlite). + +- The `jid` package has been removed, due to maintenance overhead of a go package having non-versioned dependencies. + +- When using `services.xserver.libinput` (enabled by default in GNOME), it now handles all input devices, not just touchpads. As a result, you might need to re-evaluate any custom Xorg configuration. In particular, `Option "XkbRules" "base"` may result in broken keyboard layout. + +- The `attic` package was removed. A maintained fork called [Borg](https://www.borgbackup.org/) should be used instead. Migration instructions can be found [here](http://borgbackup.readthedocs.io/en/stable/usage/upgrade.html#attic-and-borg-0-xx-to-borg-1-x). + +- The Piwik analytics software was renamed to Matomo: + + - The package `pkgs.piwik` was renamed to `pkgs.matomo`. + + - The service `services.piwik` was renamed to `services.matomo`. + + - The data directory `/var/lib/piwik` was renamed to `/var/lib/matomo`. All files will be moved automatically on first startup, but you might need to adjust your backup scripts. + + - The default `serverName` for the nginx configuration changed from `piwik.${config.networking.hostName}` to `matomo.${config.networking.hostName}.${config.networking.domain}` if `config.networking.domain` is set, `matomo.${config.networking.hostName}` if it is not set. If you change your `serverName`, remember you\'ll need to update the `trustedHosts[]` array in `/var/lib/matomo/config/config.ini.php` as well. + + - The `piwik` user was renamed to `matomo`. The service will adjust ownership automatically for files in the data directory. If you use unix socket authentication, remember to give the new `matomo` user access to the database and to change the `username` to `matomo` in the `[database]` section of `/var/lib/matomo/config/config.ini.php`. + + - If you named your database \`piwik\`, you might want to rename it to \`matomo\` to keep things clean, but this is neither enforced nor required. + +- `nodejs-4_x` is end-of-life. `nodejs-4_x`, `nodejs-slim-4_x` and `nodePackages_4_x` are removed. + +- The `pump.io` NixOS module was removed. It is now maintained as an [external module](https://github.com/rvl/pump.io-nixos). + +- The Prosody XMPP server has received a major update. The following modules were renamed: + + - `services.prosody.modules.httpserver` is now `services.prosody.modules.http_files` + + - `services.prosody.modules.console` is now `services.prosody.modules.admin_telnet` + + Many new modules are now core modules, most notably `services.prosody.modules.carbons` and `services.prosody.modules.mam`. + + The better-performing `libevent` backend is now enabled by default. + + `withCommunityModules` now passes through the modules to `services.prosody.extraModules`. Use `withOnlyInstalledCommunityModules` for modules that should not be enabled directly, e.g `lib_ldap`. + +- All prometheus exporter modules are now defined as submodules. The exporters are configured using `services.prometheus.exporters`. + +## Other Notable Changes {#sec-release-18.03-notable-changes} + +- ZNC option `services.znc.mutable` now defaults to `true`. That means that old configuration is not overwritten by default when update to the znc options are made. + +- The option `networking.wireless.networks.<name>.auth` has been added for wireless networks with WPA-Enterprise authentication. There is also a new `extraConfig` option to directly configure `wpa_supplicant` and `hidden` to connect to hidden networks. + +- In the module `networking.interfaces.<name>` the following options have been removed: + + - `ipAddress` + + - `ipv6Address` + + - `prefixLength` + + - `ipv6PrefixLength` + + - `subnetMask` + + To assign static addresses to an interface the options `ipv4.addresses` and `ipv6.addresses` should be used instead. The options `ip4` and `ip6` have been renamed to `ipv4.addresses` `ipv6.addresses` respectively. The new options `ipv4.routes` and `ipv6.routes` have been added to set up static routing. + +- The option `services.logstash.listenAddress` is now `127.0.0.1` by default. Previously the default behaviour was to listen on all interfaces. + +- `services.btrfs.autoScrub` has been added, to periodically check btrfs filesystems for data corruption. If there\'s a correct copy available, it will automatically repair corrupted blocks. + +- `displayManager.lightdm.greeters.gtk.clock-format.` has been added, the clock format string (as expected by strftime, e.g. `%H:%M`) to use with the lightdm gtk greeter panel. + + If set to null the default clock format is used. + +- `displayManager.lightdm.greeters.gtk.indicators` has been added, a list of allowed indicator modules to use with the lightdm gtk greeter panel. + + Built-in indicators include `~a11y`, `~language`, `~session`, `~power`, `~clock`, `~host`, `~spacer`. Unity indicators can be represented by short name (e.g. `sound`, `power`), service file name, or absolute path. + + If set to `null` the default indicators are used. + + In order to have the previous default configuration add + + ```nix + { + services.xserver.displayManager.lightdm.greeters.gtk.indicators = [ + "~host" "~spacer" + "~clock" "~spacer" + "~session" + "~language" + "~a11y" + "~power" + ]; + } + ``` + + to your `configuration.nix`. + +- The NixOS test driver supports user services declared by `systemd.user.services`. The methods `waitForUnit`, `getUnitInfo`, `startJob` and `stopJob` provide an optional `$user` argument for that purpose. + +- Enabling bash completion on NixOS, `programs.bash.enableCompletion`, will now also enable completion for the Nix command line tools by installing the [nix-bash-completions](https://github.com/hedning/nix-bash-completions) package. diff --git a/nixos/doc/manual/release-notes/rl-1803.xml b/nixos/doc/manual/release-notes/rl-1803.xml deleted file mode 100644 index c14679eea07..00000000000 --- a/nixos/doc/manual/release-notes/rl-1803.xml +++ /dev/null @@ -1,855 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.03"> - <title>Release 18.03 (“Impala”, 2018/04/04)</title> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.03-highlights"> - <title>Highlights</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - End of support is planned for end of October 2018, handing over to 18.09. - </para> - </listitem> - <listitem> - <para> - Platform support: x86_64-linux and x86_64-darwin since release time (the - latter isn't NixOS, really). Binaries for aarch64-linux are available, but - no channel exists yet, as it's waiting for some test fixes, etc. - </para> - </listitem> - <listitem> - <para> - Nix now defaults to 2.0; see its - <link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-2.0">release - notes</link>. - </para> - </listitem> - <listitem> - <para> - Core version changes: linux: 4.9 -> 4.14, glibc: 2.25 -> 2.26, gcc: 6 -> - 7, systemd: 234 -> 237. - </para> - </listitem> - <listitem> - <para> - Desktop version changes: gnome: 3.24 -> 3.26, (KDE) plasma-desktop: 5.10 - -> 5.12. - </para> - </listitem> - <listitem> - <para> - MariaDB 10.2, updated from 10.1, is now the default MySQL implementation. - While upgrading a few changes have been made to the infrastructure - involved: - <itemizedlist> - <listitem> - <para> - <literal>libmysql</literal> has been deprecated, please use - <literal>mysql.connector-c</literal> instead, a compatibility passthru - has been added to the MySQL packages. - </para> - </listitem> - <listitem> - <para> - The <literal>mysql57</literal> package has a new - <literal>static</literal> output containing the static libraries - including <literal>libmysqld.a</literal> - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - PHP now defaults to PHP 7.2, updated from 7.1. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.03-new-services"> - <title>New Services</title> - - <para> - The following new services were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>./config/krb5/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./hardware/digitalbitbox.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./misc/label.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/ccache.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/criu.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/digitalbitbox/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/less.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/npm.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/plotinus.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/rootston.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/systemtap.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/sway.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/udevil.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/way-cooler.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/yabar.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/zsh/zsh-autoenv.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/backup/borgbackup.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/backup/crashplan-small-business.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/dleyna-renderer.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/dleyna-server.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/pipewire.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/gnome3/chrome-gnome-shell.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/gnome3/tracker-miners.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/hardware/fwupd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/hardware/interception-tools.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/hardware/u2f.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/hardware/usbmuxd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/mail/clamsmtp.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/mail/dkimproxy-out.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/mail/pfix-srsd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/gitea.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/home-assistant.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/ihaskell.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/logkeys.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/novacomd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/osrm.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/plexpy.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/pykms.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/tzupdate.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/monitoring/fusion-inventory.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/monitoring/prometheus/exporters.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/network-filesystems/beegfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/network-filesystems/davfs2.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/network-filesystems/openafs/client.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/network-filesystems/openafs/server.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/network-filesystems/ceph.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/aria2.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/monero.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/nghttpx/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/nixops-dns.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/rxe.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/stunnel.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-apps/matomo.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-apps/restya-board.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-servers/mighttpd2.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/x11/fractalart.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./system/boot/binfmt.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./system/boot/grow-partition.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./tasks/filesystems/ecryptfs.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./virtualisation/hyperv-guest.nix</literal> - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.03-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>sound.enable</literal> now defaults to false. - </para> - </listitem> - <listitem> - <para> - Dollar signs in options under <option>services.postfix</option> are passed - verbatim to Postfix, which will interpret them as the beginning of a - parameter expression. This was already true for string-valued options in - the previous release, but not for list-valued options. If you need to pass - literal dollar signs through Postfix, double them. - </para> - </listitem> - <listitem> - <para> - The <literal>postage</literal> package (for web-based PostgreSQL - administration) has been renamed to <literal>pgmanage</literal>. The - corresponding module has also been renamed. To migrate please rename all - <option>services.postage</option> options to - <option>services.pgmanage</option>. - </para> - </listitem> - <listitem> - <para> - Package attributes starting with a digit have been prefixed with an - underscore sign. This is to avoid quoting in the configuration and other - issues with command-line tools like <literal>nix-env</literal>. The change - affects the following packages: - <itemizedlist> - <listitem> - <para> - <literal>2048-in-terminal</literal> → - <literal>_2048-in-terminal</literal> - </para> - </listitem> - <listitem> - <para> - <literal>90secondportraits</literal> → - <literal>_90secondportraits</literal> - </para> - </listitem> - <listitem> - <para> - <literal>2bwm</literal> → <literal>_2bwm</literal> - </para> - </listitem> - <listitem> - <para> - <literal>389-ds-base</literal> → <literal>_389-ds-base</literal> - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - <emphasis role="strong"> The OpenSSH service no longer enables support for - DSA keys by default, which could cause a system lock out. Update your keys - or, unfavorably, re-enable DSA support manually. </emphasis> - </para> - <para> - DSA support was - <link xlink:href="https://www.openssh.com/legacy.html">deprecated in - OpenSSH 7.0</link>, due to it being too weak. To re-enable support, add - <literal>PubkeyAcceptedKeyTypes +ssh-dss</literal> to the end of your - <option>services.openssh.extraConfig</option>. - </para> - <para> - After updating the keys to be stronger, anyone still on a pre-17.03 - version is safe to jump to 17.03, as vetted - <link xlink:href="https://search.nix.gsc.io/?q=stateVersion">here</link>. - </para> - </listitem> - <listitem> - <para> - The <literal>openssh</literal> package now includes Kerberos support by - default; the <literal>openssh_with_kerberos</literal> package is now a - deprecated alias. If you do not want Kerberos support, you can do - <literal>openssh.override { withKerberos = false; }</literal>. Note, this - also applies to the <literal>openssh_hpn</literal> package. - </para> - </listitem> - <listitem> - <para> - <literal>cc-wrapper</literal> has been split in two; there is now also a - <literal>bintools-wrapper</literal>. The most commonly used files in - <filename>nix-support</filename> are now split between the two wrappers. - Some commonly used ones, like - <filename>nix-support/dynamic-linker</filename>, are duplicated for - backwards compatability, even though they rightly belong only in - <literal>bintools-wrapper</literal>. Other more obscure ones are just - moved. - </para> - </listitem> - <listitem> - <para> - The propagation logic has been changed. The new logic, along with new - types of dependencies that go with, is thoroughly documented in the - "Specifying dependencies" section of the "Standard Environment" chapter of - the nixpkgs manual. -<!-- That's <xref linkend="ssec-stdenv-attributes"> were we to merge the manuals. --> - The old logic isn't but is easy to describe: dependencies were propagated - as the same type of dependency no matter what. In practice, that means - that many <function>propagatedNativeBuildInputs</function> should instead - be <function>propagatedBuildInputs</function>. Thankfully, that was and is - the least used type of dependency. Also, it means that some - <function>propagatedBuildInputs</function> should instead be - <function>depsTargetTargetPropagated</function>. Other types dependencies - should be unaffected. - </para> - </listitem> - <listitem> - <para> - <literal>lib.addPassthru drv passthru</literal> is removed. Use - <literal>lib.extendDerivation true passthru drv</literal> instead. - </para> - </listitem> - <listitem> - <para> - The <literal>memcached</literal> service no longer accept dynamic socket - paths via <option>services.memcached.socket</option>. Unix sockets can be - still enabled by <option>services.memcached.enableUnixSocket</option> and - will be accessible at <literal>/run/memcached/memcached.sock</literal>. - </para> - </listitem> - <listitem> - <para> - The <varname>hardware.amdHybridGraphics.disable</varname> option was - removed for lack of a maintainer. If you still need this module, you may - wish to include a copy of it from an older version of nixos in your - imports. - </para> - </listitem> - <listitem> - <para> - The merging of config options for - <varname>services.postfix.config</varname> was buggy. Previously, if other - options in the Postfix module like - <varname>services.postfix.useSrs</varname> were set and the user set - config options that were also set by such options, the resulting config - wouldn't include all options that were needed. They are now merged - correctly. If config options need to be overridden, - <literal>lib.mkForce</literal> or <literal>lib.mkOverride</literal> can be - used. - </para> - </listitem> - <listitem> - <para> - The following changes apply if the <literal>stateVersion</literal> is - changed to 18.03 or higher. For <literal>stateVersion = "17.09"</literal> - or lower the old behavior is preserved. - </para> - <itemizedlist> - <listitem> - <para> - <literal>matrix-synapse</literal> uses postgresql by default instead of - sqlite. Migration instructions can be found - <link xlink:href="https://github.com/matrix-org/synapse/blob/master/docs/postgres.rst#porting-from-sqlite"> - here </link>. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - The <literal>jid</literal> package has been removed, due to maintenance - overhead of a go package having non-versioned dependencies. - </para> - </listitem> - <listitem> - <para> - When using <option>services.xserver.libinput</option> (enabled by default - in GNOME), it now handles all input devices, not just touchpads. As a - result, you might need to re-evaluate any custom Xorg configuration. In - particular, <literal>Option "XkbRules" "base"</literal> may result in - broken keyboard layout. - </para> - </listitem> - <listitem> - <para> - The <literal>attic</literal> package was removed. A maintained fork called - <link xlink:href="https://www.borgbackup.org/">Borg</link> should be used - instead. Migration instructions can be found - <link xlink:href="http://borgbackup.readthedocs.io/en/stable/usage/upgrade.html#attic-and-borg-0-xx-to-borg-1-x">here</link>. - </para> - </listitem> - <listitem> - <para> - The Piwik analytics software was renamed to Matomo: - <itemizedlist> - <listitem> - <para> - The package <literal>pkgs.piwik</literal> was renamed to - <literal>pkgs.matomo</literal>. - </para> - </listitem> - <listitem> - <para> - The service <literal>services.piwik</literal> was renamed to - <literal>services.matomo</literal>. - </para> - </listitem> - <listitem> - <para> - The data directory <filename>/var/lib/piwik</filename> was renamed to - <filename>/var/lib/matomo</filename>. All files will be moved - automatically on first startup, but you might need to adjust your - backup scripts. - </para> - </listitem> - <listitem> - <para> - The default <option>serverName</option> for the nginx configuration - changed from <literal>piwik.${config.networking.hostName}</literal> to - <literal>matomo.${config.networking.hostName}.${config.networking.domain}</literal> - if <option>config.networking.domain</option> is set, - <literal>matomo.${config.networking.hostName}</literal> if it is not - set. If you change your <option>serverName</option>, remember you'll - need to update the <literal>trustedHosts[]</literal> array in - <filename>/var/lib/matomo/config/config.ini.php</filename> as well. - </para> - </listitem> - <listitem> - <para> - The <literal>piwik</literal> user was renamed to - <literal>matomo</literal>. The service will adjust ownership - automatically for files in the data directory. If you use unix socket - authentication, remember to give the new <literal>matomo</literal> user - access to the database and to change the <literal>username</literal> to - <literal>matomo</literal> in the <literal>[database]</literal> section - of <filename>/var/lib/matomo/config/config.ini.php</filename>. - </para> - </listitem> - <listitem> - <para> - If you named your database `piwik`, you might want to rename it to - `matomo` to keep things clean, but this is neither enforced nor - required. - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - <literal>nodejs-4_x</literal> is end-of-life. - <literal>nodejs-4_x</literal>, <literal>nodejs-slim-4_x</literal> and - <literal>nodePackages_4_x</literal> are removed. - </para> - </listitem> - <listitem> - <para> - The <literal>pump.io</literal> NixOS module was removed. It is now - maintained as an - <link xlink:href="https://github.com/rvl/pump.io-nixos">external - module</link>. - </para> - </listitem> - <listitem> - <para> - The Prosody XMPP server has received a major update. The following modules - were renamed: - <itemizedlist> - <listitem> - <para> - <option>services.prosody.modules.httpserver</option> is now - <option>services.prosody.modules.http_files</option> - </para> - </listitem> - <listitem> - <para> - <option>services.prosody.modules.console</option> is now - <option>services.prosody.modules.admin_telnet</option> - </para> - </listitem> - </itemizedlist> - </para> - <para> - Many new modules are now core modules, most notably - <option>services.prosody.modules.carbons</option> and - <option>services.prosody.modules.mam</option>. - </para> - <para> - The better-performing <literal>libevent</literal> backend is now enabled - by default. - </para> - <para> - <literal>withCommunityModules</literal> now passes through the modules to - <option>services.prosody.extraModules</option>. Use - <literal>withOnlyInstalledCommunityModules</literal> for modules that - should not be enabled directly, e.g <literal>lib_ldap</literal>. - </para> - </listitem> - <listitem> - <para> - All prometheus exporter modules are now defined as submodules. The - exporters are configured using - <literal>services.prometheus.exporters</literal>. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.03-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para> - ZNC option <option>services.znc.mutable</option> now defaults to - <literal>true</literal>. That means that old configuration is not - overwritten by default when update to the znc options are made. - </para> - </listitem> - <listitem> - <para> - The option <option>networking.wireless.networks.<name>.auth</option> - has been added for wireless networks with WPA-Enterprise authentication. - There is also a new <option>extraConfig</option> option to directly - configure <literal>wpa_supplicant</literal> and <option>hidden</option> to - connect to hidden networks. - </para> - </listitem> - <listitem> - <para> - In the module <option>networking.interfaces.<name></option> the - following options have been removed: - <itemizedlist> - <listitem> - <para> - <option>ipAddress</option> - </para> - </listitem> - <listitem> - <para> - <option>ipv6Address</option> - </para> - </listitem> - <listitem> - <para> - <option>prefixLength</option> - </para> - </listitem> - <listitem> - <para> - <option>ipv6PrefixLength</option> - </para> - </listitem> - <listitem> - <para> - <option>subnetMask</option> - </para> - </listitem> - </itemizedlist> - To assign static addresses to an interface the options - <option>ipv4.addresses</option> and <option>ipv6.addresses</option> should - be used instead. The options <option>ip4</option> and <option>ip6</option> - have been renamed to <option>ipv4.addresses</option> - <option>ipv6.addresses</option> respectively. The new options - <option>ipv4.routes</option> and <option>ipv6.routes</option> have been - added to set up static routing. - </para> - </listitem> - <listitem> - <para> - The option <option>services.logstash.listenAddress</option> is now - <literal>127.0.0.1</literal> by default. Previously the default behaviour - was to listen on all interfaces. - </para> - </listitem> - <listitem> - <para> - <literal>services.btrfs.autoScrub</literal> has been added, to - periodically check btrfs filesystems for data corruption. If there's a - correct copy available, it will automatically repair corrupted blocks. - </para> - </listitem> - <listitem> - <para> - <literal>displayManager.lightdm.greeters.gtk.clock-format.</literal> has - been added, the clock format string (as expected by strftime, e.g. - <literal>%H:%M</literal>) to use with the lightdm gtk greeter panel. - </para> - <para> - If set to null the default clock format is used. - </para> - </listitem> - <listitem> - <para> - <literal>displayManager.lightdm.greeters.gtk.indicators</literal> has been - added, a list of allowed indicator modules to use with the lightdm gtk - greeter panel. - </para> - <para> - Built-in indicators include <literal>~a11y</literal>, - <literal>~language</literal>, <literal>~session</literal>, - <literal>~power</literal>, <literal>~clock</literal>, - <literal>~host</literal>, <literal>~spacer</literal>. Unity indicators can - be represented by short name (e.g. <literal>sound</literal>, - <literal>power</literal>), service file name, or absolute path. - </para> - <para> - If set to <literal>null</literal> the default indicators are used. - </para> - <para> - In order to have the previous default configuration add -<programlisting> - services.xserver.displayManager.lightdm.greeters.gtk.indicators = [ - "~host" "~spacer" - "~clock" "~spacer" - "~session" - "~language" - "~a11y" - "~power" - ]; -</programlisting> - to your <literal>configuration.nix</literal>. - </para> - </listitem> - <listitem> - <para> - The NixOS test driver supports user services declared by - <literal>systemd.user.services</literal>. The methods - <literal>waitForUnit</literal>, <literal>getUnitInfo</literal>, - <literal>startJob</literal> and <literal>stopJob</literal> provide an - optional <literal>$user</literal> argument for that purpose. - </para> - </listitem> - <listitem> - <para> - Enabling bash completion on NixOS, - <literal>programs.bash.enableCompletion</literal>, will now also enable - completion for the Nix command line tools by installing the - <link xlink:href="https://github.com/hedning/nix-bash-completions">nix-bash-completions</link> - package. - </para> - </listitem> - </itemizedlist> - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1809.section.md b/nixos/doc/manual/release-notes/rl-1809.section.md new file mode 100644 index 00000000000..3443db37c97 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1809.section.md @@ -0,0 +1,332 @@ +# Release 18.09 ("Jellyfish", 2018/10/05) {#sec-release-18.09} + +## Highlights {#sec-release-18.09-highlights} + +In addition to numerous new and upgraded packages, this release has the following notable updates: + +- End of support is planned for end of April 2019, handing over to 19.03. + +- Platform support: x86_64-linux and x86_64-darwin as always. Support for aarch64-linux is as with the previous releases, not equivalent to the x86-64-linux release, but with efforts to reach parity. + +- Nix has been updated to 2.1; see its [release notes](https://nixos.org/nix/manual/#ssec-relnotes-2.1). + +- Core versions: linux: 4.14 LTS (unchanged), glibc: 2.26 → 2.27, gcc: 7 (unchanged), systemd: 237 → 239. + +- Desktop version changes: gnome: 3.26 → 3.28, (KDE) plasma-desktop: 5.12 → 5.13. + +Notable changes and additions for 18.09 include: + +- Support for wrapping binaries using `firejail` has been added through `programs.firejail.wrappedBinaries`. + + For example + + ```nix + { + programs.firejail = { + enable = true; + wrappedBinaries = { + firefox = "${lib.getBin pkgs.firefox}/bin/firefox"; + mpv = "${lib.getBin pkgs.mpv}/bin/mpv"; + }; + }; + } + ``` + + This will place `firefox` and `mpv` binaries in the global path wrapped by firejail. + +- User channels are now in the default `NIX_PATH`, allowing users to use their personal `nix-channel` defined channels in `nix-build` and `nix-shell` commands, as well as in imports like `import <mychannel>`. + + For example + + ```ShellSession + $ nix-channel --add https://nixos.org/channels/nixpkgs-unstable nixpkgsunstable + $ nix-channel --update + $ nix-build '<nixpkgsunstable>' -A gitFull + $ nix run -f '<nixpkgsunstable>' gitFull + $ nix-instantiate -E '(import <nixpkgsunstable> {}).gitFull' + ``` + +## New Services {#sec-release-18.09-new-services} + +A curated selection of new services that were added since the last release: + +- The `services.cassandra` module has been reworked and was rewritten from scratch. The service has succeeding tests for the versions 2.1, 2.2, 3.0 and 3.11 of [Apache Cassandra](https://cassandra.apache.org/). + +- There is a new `services.foundationdb` module for deploying [FoundationDB](https://www.foundationdb.org) clusters. + +- When enabled the `iproute2` will copy the files expected by ip route (e.g., `rt_tables`) in `/etc/iproute2`. This allows to write aliases for routing tables for instance. + +- `services.strongswan-swanctl` is a modern replacement for `services.strongswan`. You can use either one of them to setup IPsec VPNs but not both at the same time. + + `services.strongswan-swanctl` uses the [swanctl](https://wiki.strongswan.org/projects/strongswan/wiki/swanctl) command which uses the modern [vici](https://github.com/strongswan/strongswan/blob/master/src/libcharon/plugins/vici/README.md) _Versatile IKE Configuration Interface_. The deprecated `ipsec` command used in `services.strongswan` is using the legacy [stroke configuration interface](https://github.com/strongswan/strongswan/blob/master/README_LEGACY.md). + +- The new `services.elasticsearch-curator` service periodically curates or manages, your Elasticsearch indices and snapshots. + +Every new services: + +- `./config/xdg/autostart.nix` + +- `./config/xdg/icons.nix` + +- `./config/xdg/menus.nix` + +- `./config/xdg/mime.nix` + +- `./hardware/brightnessctl.nix` + +- `./hardware/onlykey.nix` + +- `./hardware/video/uvcvideo/default.nix` + +- `./misc/documentation.nix` + +- `./programs/firejail.nix` + +- `./programs/iftop.nix` + +- `./programs/sedutil.nix` + +- `./programs/singularity.nix` + +- `./programs/xss-lock.nix` + +- `./programs/zsh/zsh-autosuggestions.nix` + +- `./services/admin/oxidized.nix` + +- `./services/backup/duplicati.nix` + +- `./services/backup/restic.nix` + +- `./services/backup/restic-rest-server.nix` + +- `./services/cluster/hadoop/default.nix` + +- `./services/databases/aerospike.nix` + +- `./services/databases/monetdb.nix` + +- `./services/desktops/bamf.nix` + +- `./services/desktops/flatpak.nix` + +- `./services/desktops/zeitgeist.nix` + +- `./services/development/bloop.nix` + +- `./services/development/jupyter/default.nix` + +- `./services/hardware/lcd.nix` + +- `./services/hardware/undervolt.nix` + +- `./services/misc/clipmenu.nix` + +- `./services/misc/gitweb.nix` + +- `./services/misc/serviio.nix` + +- `./services/misc/safeeyes.nix` + +- `./services/misc/sysprof.nix` + +- `./services/misc/weechat.nix` + +- `./services/monitoring/datadog-agent.nix` + +- `./services/monitoring/incron.nix` + +- `./services/networking/dnsdist.nix` + +- `./services/networking/freeradius.nix` + +- `./services/networking/hans.nix` + +- `./services/networking/morty.nix` + +- `./services/networking/ndppd.nix` + +- `./services/networking/ocserv.nix` + +- `./services/networking/owamp.nix` + +- `./services/networking/quagga.nix` + +- `./services/networking/shadowsocks.nix` + +- `./services/networking/stubby.nix` + +- `./services/networking/zeronet.nix` + +- `./services/security/certmgr.nix` + +- `./services/security/cfssl.nix` + +- `./services/security/oauth2_proxy_nginx.nix` + +- `./services/web-apps/virtlyst.nix` + +- `./services/web-apps/youtrack.nix` + +- `./services/web-servers/hitch/default.nix` + +- `./services/web-servers/hydron.nix` + +- `./services/web-servers/meguca.nix` + +- `./services/web-servers/nginx/gitweb.nix` + +- `./virtualisation/kvmgt.nix` + +- `./virtualisation/qemu-guest-agent.nix` + +## Backward Incompatibilities {#sec-release-18.09-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- Some licenses that were incorrectly not marked as unfree now are. This is the case for: + + - cc-by-nc-sa-20: Creative Commons Attribution Non Commercial Share Alike 2.0 + + - cc-by-nc-sa-25: Creative Commons Attribution Non Commercial Share Alike 2.5 + + - cc-by-nc-sa-30: Creative Commons Attribution Non Commercial Share Alike 3.0 + + - cc-by-nc-sa-40: Creative Commons Attribution Non Commercial Share Alike 4.0 + + - cc-by-nd-30: Creative Commons Attribution-No Derivative Works v3.00 + + - msrla: Microsoft Research License Agreement + +- The deprecated `services.cassandra` module has seen a complete rewrite. (See above.) + +- `lib.strict` is removed. Use `builtins.seq` instead. + +- The `clementine` package points now to the free derivation. `clementineFree` is removed now and `clementineUnfree` points to the package which is bundled with the unfree `libspotify` package. + +- The `netcat` package is now taken directly from OpenBSD\'s `libressl`, instead of relying on Debian\'s fork. The new version should be very close to the old version, but there are some minor differences. Importantly, flags like -b, -q, -C, and -Z are no longer accepted by the nc command. + +- The `services.docker-registry.extraConfig` object doesn\'t contain environment variables anymore. Instead it needs to provide an object structure that can be mapped onto the YAML configuration defined in [the `docker/distribution` docs](https://github.com/docker/distribution/blob/v2.6.2/docs/configuration.md). + +- `gnucash` has changed from version 2.4 to 3.x. If you\'ve been using `gnucash` (version 2.4) instead of `gnucash26` (version 2.6) you must open your Gnucash data file(s) with `gnucash26` and then save them to upgrade the file format. Then you may use your data file(s) with Gnucash 3.x. See the upgrade [documentation](https://wiki.gnucash.org/wiki/FAQ#Using_Different_Versions.2C_Up_And_Downgrade). Gnucash 2.4 is still available under the attribute `gnucash24`. + +- `services.munge` now runs as user (and group) `munge` instead of root. Make sure the key file is accessible to the daemon. + +- `dockerTools.buildImage` now uses `null` as default value for `tag`, which indicates that the nix output hash will be used as tag. + +- The ELK stack: `elasticsearch`, `logstash` and `kibana` has been upgraded from 2.\* to 6.3.\*. The 2.\* versions have been [unsupported since last year](https://www.elastic.co/support/eol) so they have been removed. You can still use the 5.\* versions under the names `elasticsearch5`, `logstash5` and `kibana5`. + + The elastic beats: `filebeat`, `heartbeat`, `metricbeat` and `packetbeat` have had the same treatment: they now target 6.3.\* as well. The 5.\* versions are available under the names: `filebeat5`, `heartbeat5`, `metricbeat5` and `packetbeat5` + + The ELK-6.3 stack now comes with [X-Pack by default](https://www.elastic.co/products/x-pack/open). Since X-Pack is licensed under the [Elastic License](https://github.com/elastic/elasticsearch/blob/master/licenses/ELASTIC-LICENSE.txt) the ELK packages now have an unfree license. To use them you need to specify `allowUnfree = true;` in your nixpkgs configuration. + + Fortunately there is also a free variant of the ELK stack without X-Pack. The packages are available under the names: `elasticsearch-oss`, `logstash-oss` and `kibana-oss`. + +- Options `boot.initrd.luks.devices.name.yubikey.ramfsMountPoint` `boot.initrd.luks.devices.name.yubikey.storage.mountPoint` were removed. `luksroot.nix` module never supported more than one YubiKey at a time anyway, hence those options never had any effect. You should be able to remove them from your config without any issues. + +- `stdenv.system` and `system` in nixpkgs now refer to the host platform instead of the build platform. For native builds this is not change, let alone a breaking one. For cross builds, it is a breaking change, and `stdenv.buildPlatform.system` can be used instead for the old behavior. They should be using that anyways for clarity. + +- Groups `kvm` and `render` are introduced now, as systemd requires them. + +## Other Notable Changes {#sec-release-18.09-notable-changes} + +- `dockerTools.pullImage` relies on image digest instead of image tag to download the image. The `sha256` of a pulled image has to be updated. + +- `lib.attrNamesToStr` has been deprecated. Use more specific concatenation (`lib.concat(Map)StringsSep`) instead. + +- `lib.addErrorContextToAttrs` has been deprecated. Use `builtins.addErrorContext` directly. + +- `lib.showVal` has been deprecated. Use `lib.traceSeqN` instead. + +- `lib.traceXMLVal` has been deprecated. Use `lib.traceValFn builtins.toXml` instead. + +- `lib.traceXMLValMarked` has been deprecated. Use `lib.traceValFn (x: str + builtins.toXML x)` instead. + +- The `pkgs` argument to NixOS modules can now be set directly using `nixpkgs.pkgs`. Previously, only the `system`, `config` and `overlays` arguments could be used to influence `pkgs`. + +- A NixOS system can now be constructed more easily based on a preexisting invocation of Nixpkgs. For example: + + ```nix + { + inherit (pkgs.nixos { + boot.loader.grub.enable = false; + fileSystems."/".device = "/dev/xvda1"; + }) toplevel kernel initialRamdisk manual; + } + ``` + + This benefits evaluation performance, lets you write Nixpkgs packages that depend on NixOS images and is consistent with a deployment architecture that would be centered around Nixpkgs overlays. + +- `lib.traceValIfNot` has been deprecated. Use `if/then/else` and `lib.traceValSeq` instead. + +- `lib.traceCallXml` has been deprecated. Please complain if you use the function regularly. + +- The attribute `lib.nixpkgsVersion` has been deprecated in favor of `lib.version`. Please refer to the discussion in [NixOS/nixpkgs\#39416](https://github.com/NixOS/nixpkgs/pull/39416#discussion_r183845745) for further reference. + +- `lib.recursiveUpdateUntil` was not acting according to its specification. It has been fixed to act according to the docstring, and a test has been added. + +- The module for `security.dhparams` has two new options now: + + `security.dhparams.stateless` + + : Puts the generated Diffie-Hellman parameters into the Nix store instead of managing them in a stateful manner in `/var/lib/dhparams`. + + `security.dhparams.defaultBitSize` + + : The default bit size to use for the generated Diffie-Hellman parameters. + + ::: {.note} + The path to the actual generated parameter files should now be queried using `config.security.dhparams.params.name.path` because it might be either in the Nix store or in a directory configured by `security.dhparams.path`. + ::: + + ::: {.note} + **For developers:** + + Module implementers should not set a specific bit size in order to let users configure it by themselves if they want to have a different bit size than the default (2048). + + An example usage of this would be: + + ```nix + { config, ... }: + + { + security.dhparams.params.myservice = {}; + environment.etc."myservice.conf".text = '' + dhparams = ${config.security.dhparams.params.myservice.path} + ''; + } + ``` + + ::: + +- `networking.networkmanager.useDnsmasq` has been deprecated. Use `networking.networkmanager.dns` instead. + +- The Kubernetes package has been bumped to major version 1.11. Please consult the [release notes](https://github.com/kubernetes/kubernetes/blob/release-1.11/CHANGELOG-1.11.md) for details on new features and api changes. + +- The option `services.kubernetes.apiserver.admissionControl` was renamed to `services.kubernetes.apiserver.enableAdmissionPlugins`. + +- Recommended way to access the Kubernetes Dashboard is via HTTPS (TLS) Therefore; public service port for the dashboard has changed to 443 (container port 8443) and scheme to https. + +- The option `services.kubernetes.apiserver.address` was renamed to `services.kubernetes.apiserver.bindAddress`. Note that the default value has changed from 127.0.0.1 to 0.0.0.0. + +- The option `services.kubernetes.apiserver.publicAddress` was not used and thus has been removed. + +- The option `services.kubernetes.addons.dashboard.enableRBAC` was renamed to `services.kubernetes.addons.dashboard.rbac.enable`. + +- The Kubernetes Dashboard now has only minimal RBAC permissions by default. If dashboard cluster-admin rights are desired, set `services.kubernetes.addons.dashboard.rbac.clusterAdmin` to true. On existing clusters, in order for the revocation of privileges to take effect, the current ClusterRoleBinding for kubernetes-dashboard must be manually removed: `kubectl delete clusterrolebinding kubernetes-dashboard` + +- The `programs.screen` module provides allows to configure `/etc/screenrc`, however the module behaved fairly counterintuitive as the config exists, but the package wasn\'t available. Since 18.09 `pkgs.screen` will be added to `environment.systemPackages`. + +- The module `services.networking.hostapd` now uses WPA2 by default. + +- `s6Dns`, `s6Networking`, `s6LinuxUtils` and `s6PortableUtils` renamed to `s6-dns`, `s6-networking`, `s6-linux-utils` and `s6-portable-utils` respectively. + +- The module option `nix.useSandbox` is now defaulted to `true`. + +- The config activation script of `nixos-rebuild` now [reloads](https://www.freedesktop.org/software/systemd/man/systemctl.html#Manager%20Lifecycle%20Commands) all user units for each authenticated user. + +- The default display manager is now LightDM. To use SLiM set `services.xserver.displayManager.slim.enable` to `true`. + +- NixOS option descriptions are now automatically broken up into individual paragraphs if the text contains two consecutive newlines, so it\'s no longer necessary to use `</para><para>` to start a new paragraph. + +- Top-level `buildPlatform`, `hostPlatform`, and `targetPlatform` in Nixpkgs are deprecated. Please use their equivalents in `stdenv` instead: `stdenv.buildPlatform`, `stdenv.hostPlatform`, and `stdenv.targetPlatform`. diff --git a/nixos/doc/manual/release-notes/rl-1809.xml b/nixos/doc/manual/release-notes/rl-1809.xml deleted file mode 100644 index 3f10b26223d..00000000000 --- a/nixos/doc/manual/release-notes/rl-1809.xml +++ /dev/null @@ -1,933 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.09"> - <title>Release 18.09 (“Jellyfish”, 2018/10/05)</title> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.09-highlights"> - <title>Highlights</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following notable updates: - </para> - - <itemizedlist> - <listitem> - <para> - End of support is planned for end of April 2019, handing over to 19.03. - </para> - </listitem> - <listitem> - <para> - Platform support: x86_64-linux and x86_64-darwin as always. Support for - aarch64-linux is as with the previous releases, not equivalent to the - x86-64-linux release, but with efforts to reach parity. - </para> - </listitem> - <listitem> - <para> - Nix has been updated to 2.1; see its - <link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-2.1">release - notes</link>. - </para> - </listitem> - <listitem> - <para> - Core versions: linux: 4.14 LTS (unchanged), glibc: 2.26 → 2.27, gcc: 7 - (unchanged), systemd: 237 → 239. - </para> - </listitem> - <listitem> - <para> - Desktop version changes: gnome: 3.26 → 3.28, (KDE) plasma-desktop: 5.12 - → 5.13. - </para> - </listitem> - </itemizedlist> - - <para> - Notable changes and additions for 18.09 include: - </para> - - <itemizedlist> - <listitem> - <para> - Support for wrapping binaries using <literal>firejail</literal> has been - added through <varname>programs.firejail.wrappedBinaries</varname>. - </para> - <para> - For example - </para> -<programlisting> -programs.firejail = { - enable = true; - wrappedBinaries = { - firefox = "${lib.getBin pkgs.firefox}/bin/firefox"; - mpv = "${lib.getBin pkgs.mpv}/bin/mpv"; - }; -}; -</programlisting> - <para> - This will place <literal>firefox</literal> and <literal>mpv</literal> - binaries in the global path wrapped by firejail. - </para> - </listitem> - <listitem> - <para> - User channels are now in the default <literal>NIX_PATH</literal>, allowing - users to use their personal <command>nix-channel</command> defined - channels in <command>nix-build</command> and <command>nix-shell</command> - commands, as well as in imports like <code>import - <mychannel></code>. - </para> - <para> - For example - </para> -<programlisting> -$ nix-channel --add https://nixos.org/channels/nixpkgs-unstable nixpkgsunstable -$ nix-channel --update -$ nix-build '<nixpkgsunstable>' -A gitFull -$ nix run -f '<nixpkgsunstable>' gitFull -$ nix-instantiate -E '(import <nixpkgsunstable> {}).gitFull' -</programlisting> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.09-new-services"> - <title>New Services</title> - - <para> - A curated selection of new services that were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - The <varname>services.cassandra</varname> module has been reworked and was - rewritten from scratch. The service has succeeding tests for the versions - 2.1, 2.2, 3.0 and 3.11 of - <link - xlink:href="https://cassandra.apache.org/">Apache - Cassandra</link>. - </para> - </listitem> - <listitem> - <para> - There is a new <varname>services.foundationdb</varname> module for - deploying - <link xlink:href="https://www.foundationdb.org">FoundationDB</link> - clusters. - </para> - </listitem> - <listitem> - <para> - When enabled the <literal>iproute2</literal> will copy the files expected - by ip route (e.g., <filename>rt_tables</filename>) in - <filename>/etc/iproute2</filename>. This allows to write aliases for - routing tables for instance. - </para> - </listitem> - <listitem> - <para> - <varname>services.strongswan-swanctl</varname> is a modern replacement for - <varname>services.strongswan</varname>. You can use either one of them to - setup IPsec VPNs but not both at the same time. - </para> - <para> - <varname>services.strongswan-swanctl</varname> uses the - <link xlink:href="https://wiki.strongswan.org/projects/strongswan/wiki/swanctl">swanctl</link> - command which uses the modern - <link xlink:href="https://github.com/strongswan/strongswan/blob/master/src/libcharon/plugins/vici/README.md">vici</link> - <emphasis>Versatile IKE Configuration Interface</emphasis>. The deprecated - <literal>ipsec</literal> command used in - <varname>services.strongswan</varname> is using the legacy - <link xlink:href="https://github.com/strongswan/strongswan/blob/master/README_LEGACY.md">stroke - configuration interface</link>. - </para> - </listitem> - <listitem> - <para> - The new <varname>services.elasticsearch-curator</varname> service - periodically curates or manages, your Elasticsearch indices and snapshots. - </para> - </listitem> - </itemizedlist> - - <para> - Every new services: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>./config/xdg/autostart.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./config/xdg/icons.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./config/xdg/menus.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./config/xdg/mime.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./hardware/brightnessctl.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./hardware/onlykey.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./hardware/video/uvcvideo/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./misc/documentation.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/firejail.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/iftop.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/sedutil.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/singularity.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/xss-lock.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./programs/zsh/zsh-autosuggestions.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/admin/oxidized.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/backup/duplicati.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/backup/restic.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/backup/restic-rest-server.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/cluster/hadoop/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/databases/aerospike.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/databases/monetdb.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/bamf.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/flatpak.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/desktops/zeitgeist.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/development/bloop.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/development/jupyter/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/hardware/lcd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/hardware/undervolt.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/clipmenu.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/gitweb.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/serviio.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/safeeyes.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/sysprof.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/weechat.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/monitoring/datadog-agent.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/monitoring/incron.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/dnsdist.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/freeradius.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/hans.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/morty.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/ndppd.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/ocserv.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/owamp.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/quagga.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/shadowsocks.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/stubby.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/networking/zeronet.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/security/certmgr.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/security/cfssl.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/security/oauth2_proxy_nginx.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-apps/virtlyst.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-apps/youtrack.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-servers/hitch/default.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-servers/hydron.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-servers/meguca.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./services/web-servers/nginx/gitweb.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./virtualisation/kvmgt.nix</literal> - </para> - </listitem> - <listitem> - <para> - <literal>./virtualisation/qemu-guest-agent.nix</literal> - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.09-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - Some licenses that were incorrectly not marked as unfree now are. This is - the case for: - <itemizedlist> - <listitem> - <para> - cc-by-nc-sa-20: Creative Commons Attribution Non Commercial Share Alike - 2.0 - </para> - </listitem> - <listitem> - <para> - cc-by-nc-sa-25: Creative Commons Attribution Non Commercial Share Alike - 2.5 - </para> - </listitem> - <listitem> - <para> - cc-by-nc-sa-30: Creative Commons Attribution Non Commercial Share Alike - 3.0 - </para> - </listitem> - <listitem> - <para> - cc-by-nc-sa-40: Creative Commons Attribution Non Commercial Share Alike - 4.0 - </para> - </listitem> - <listitem> - <para> - cc-by-nd-30: Creative Commons Attribution-No Derivative Works v3.00 - </para> - </listitem> - <listitem> - <para> - msrla: Microsoft Research License Agreement - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - The deprecated <varname>services.cassandra</varname> module has seen a - complete rewrite. (See above.) - </para> - </listitem> - <listitem> - <para> - <literal>lib.strict</literal> is removed. Use - <literal>builtins.seq</literal> instead. - </para> - </listitem> - <listitem> - <para> - The <literal>clementine</literal> package points now to the free - derivation. <literal>clementineFree</literal> is removed now and - <literal>clementineUnfree</literal> points to the package which is bundled - with the unfree <literal>libspotify</literal> package. - </para> - </listitem> - <listitem> - <para> - The <literal>netcat</literal> package is now taken directly from OpenBSD's - <literal>libressl</literal>, instead of relying on Debian's fork. The new - version should be very close to the old version, but there are some minor - differences. Importantly, flags like -b, -q, -C, and -Z are no longer - accepted by the nc command. - </para> - </listitem> - <listitem> - <para> - The <varname>services.docker-registry.extraConfig</varname> object doesn't - contain environment variables anymore. Instead it needs to provide an - object structure that can be mapped onto the YAML configuration defined in - <link xlink:href="https://github.com/docker/distribution/blob/v2.6.2/docs/configuration.md">the - <varname>docker/distribution</varname> docs</link>. - </para> - </listitem> - <listitem> - <para> - <literal>gnucash</literal> has changed from version 2.4 to 3.x. If you've - been using <literal>gnucash</literal> (version 2.4) instead of - <literal>gnucash26</literal> (version 2.6) you must open your Gnucash data - file(s) with <literal>gnucash26</literal> and then save them to upgrade - the file format. Then you may use your data file(s) with Gnucash 3.x. See - the upgrade - <link xlink:href="https://wiki.gnucash.org/wiki/FAQ#Using_Different_Versions.2C_Up_And_Downgrade">documentation</link>. - Gnucash 2.4 is still available under the attribute - <literal>gnucash24</literal>. - </para> - </listitem> - <listitem> - <para> - <varname>services.munge</varname> now runs as user (and group) - <literal>munge</literal> instead of root. Make sure the key file is - accessible to the daemon. - </para> - </listitem> - <listitem> - <para> - <varname>dockerTools.buildImage</varname> now uses <literal>null</literal> - as default value for <varname>tag</varname>, which indicates that the nix - output hash will be used as tag. - </para> - </listitem> - <listitem> - <para> - The ELK stack: <varname>elasticsearch</varname>, - <varname>logstash</varname> and <varname>kibana</varname> has been - upgraded from 2.* to 6.3.*. The 2.* versions have been - <link xlink:href="https://www.elastic.co/support/eol">unsupported since - last year</link> so they have been removed. You can still use the 5.* - versions under the names <varname>elasticsearch5</varname>, - <varname>logstash5</varname> and <varname>kibana5</varname>. - </para> - <para> - The elastic beats: <varname>filebeat</varname>, - <varname>heartbeat</varname>, <varname>metricbeat</varname> and - <varname>packetbeat</varname> have had the same treatment: they now target - 6.3.* as well. The 5.* versions are available under the names: - <varname>filebeat5</varname>, <varname>heartbeat5</varname>, - <varname>metricbeat5</varname> and <varname>packetbeat5</varname> - </para> - <para> - The ELK-6.3 stack now comes with - <link xlink:href="https://www.elastic.co/products/x-pack/open">X-Pack by - default</link>. Since X-Pack is licensed under the - <link xlink:href="https://github.com/elastic/elasticsearch/blob/master/licenses/ELASTIC-LICENSE.txt">Elastic - License</link> the ELK packages now have an unfree license. To use them - you need to specify <literal>allowUnfree = true;</literal> in your nixpkgs - configuration. - </para> - <para> - Fortunately there is also a free variant of the ELK stack without X-Pack. - The packages are available under the names: - <varname>elasticsearch-oss</varname>, <varname>logstash-oss</varname> and - <varname>kibana-oss</varname>. - </para> - </listitem> - <listitem> - <para> - Options - <literal>boot.initrd.luks.devices.<replaceable>name</replaceable>.yubikey.ramfsMountPoint</literal> - <literal>boot.initrd.luks.devices.<replaceable>name</replaceable>.yubikey.storage.mountPoint</literal> - were removed. <literal>luksroot.nix</literal> module never supported more - than one YubiKey at a time anyway, hence those options never had any - effect. You should be able to remove them from your config without any - issues. - </para> - </listitem> - <listitem> - <para> - <literal>stdenv.system</literal> and <literal>system</literal> in nixpkgs - now refer to the host platform instead of the build platform. For native - builds this is not change, let alone a breaking one. For cross builds, it - is a breaking change, and <literal>stdenv.buildPlatform.system</literal> - can be used instead for the old behavior. They should be using that - anyways for clarity. - </para> - </listitem> - <listitem> - <para> - Groups <literal>kvm</literal> and <literal>render</literal> are introduced - now, as systemd requires them. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-18.09-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para> - <literal>dockerTools.pullImage</literal> relies on image digest instead of - image tag to download the image. The <literal>sha256</literal> of a pulled - image has to be updated. - </para> - </listitem> - <listitem> - <para> - <literal>lib.attrNamesToStr</literal> has been deprecated. Use more - specific concatenation (<literal>lib.concat(Map)StringsSep</literal>) - instead. - </para> - </listitem> - <listitem> - <para> - <literal>lib.addErrorContextToAttrs</literal> has been deprecated. Use - <literal>builtins.addErrorContext</literal> directly. - </para> - </listitem> - <listitem> - <para> - <literal>lib.showVal</literal> has been deprecated. Use - <literal>lib.traceSeqN</literal> instead. - </para> - </listitem> - <listitem> - <para> - <literal>lib.traceXMLVal</literal> has been deprecated. Use - <literal>lib.traceValFn builtins.toXml</literal> instead. - </para> - </listitem> - <listitem> - <para> - <literal>lib.traceXMLValMarked</literal> has been deprecated. Use - <literal>lib.traceValFn (x: str + builtins.toXML x)</literal> instead. - </para> - </listitem> - <listitem> - <para> - The <literal>pkgs</literal> argument to NixOS modules can now be set - directly using <literal>nixpkgs.pkgs</literal>. Previously, only the - <literal>system</literal>, <literal>config</literal> and - <literal>overlays</literal> arguments could be used to influence - <literal>pkgs</literal>. - </para> - </listitem> - <listitem> - <para> - A NixOS system can now be constructed more easily based on a preexisting - invocation of Nixpkgs. For example: -<programlisting> -inherit (pkgs.nixos { - boot.loader.grub.enable = false; - fileSystems."/".device = "/dev/xvda1"; -}) toplevel kernel initialRamdisk manual; - </programlisting> - This benefits evaluation performance, lets you write Nixpkgs packages that - depend on NixOS images and is consistent with a deployment architecture - that would be centered around Nixpkgs overlays. - </para> - </listitem> - <listitem> - <para> - <literal>lib.traceValIfNot</literal> has been deprecated. Use - <literal>if/then/else</literal> and <literal>lib.traceValSeq</literal> - instead. - </para> - </listitem> - <listitem> - <para> - <literal>lib.traceCallXml</literal> has been deprecated. Please complain - if you use the function regularly. - </para> - </listitem> - <listitem> - <para> - The attribute <literal>lib.nixpkgsVersion</literal> has been deprecated in - favor of <literal>lib.version</literal>. Please refer to the discussion in - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/39416#discussion_r183845745">NixOS/nixpkgs#39416</link> - for further reference. - </para> - </listitem> - <listitem> - <para> - <literal>lib.recursiveUpdateUntil</literal> was not acting according to - its specification. It has been fixed to act according to the docstring, - and a test has been added. - </para> - </listitem> - <listitem> - <para> - The module for <option>security.dhparams</option> has two new options now: - </para> - <variablelist> - <varlistentry> - <term> - <option>security.dhparams.stateless</option> - </term> - <listitem> - <para> - Puts the generated Diffie-Hellman parameters into the Nix store instead - of managing them in a stateful manner in - <filename class="directory">/var/lib/dhparams</filename>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term> - <option>security.dhparams.defaultBitSize</option> - </term> - <listitem> - <para> - The default bit size to use for the generated Diffie-Hellman - parameters. - </para> - </listitem> - </varlistentry> - </variablelist> - <note> - <para> - The path to the actual generated parameter files should now be queried - using - <literal>config.security.dhparams.params.<replaceable>name</replaceable>.path</literal> - because it might be either in the Nix store or in a directory configured - by <option>security.dhparams.path</option>. - </para> - </note> - <note> - <title>For developers:</title> - <para> - Module implementers should not set a specific bit size in order to let - users configure it by themselves if they want to have a different bit - size than the default (2048). - </para> - <para> - An example usage of this would be: -<programlisting> -{ config, ... }: - -{ - security.dhparams.params.myservice = {}; - environment.etc."myservice.conf".text = '' - dhparams = ${config.security.dhparams.params.myservice.path} - ''; -} -</programlisting> - </para> - </note> - </listitem> - <listitem> - <para> - <literal>networking.networkmanager.useDnsmasq</literal> has been - deprecated. Use <literal>networking.networkmanager.dns</literal> instead. - </para> - </listitem> - <listitem> - <para> - The Kubernetes package has been bumped to major version 1.11. Please - consult the - <link xlink:href="https://github.com/kubernetes/kubernetes/blob/release-1.11/CHANGELOG-1.11.md">release - notes</link> for details on new features and api changes. - </para> - </listitem> - <listitem> - <para> - The option - <varname>services.kubernetes.apiserver.admissionControl</varname> was - renamed to - <varname>services.kubernetes.apiserver.enableAdmissionPlugins</varname>. - </para> - </listitem> - <listitem> - <para> - Recommended way to access the Kubernetes Dashboard is via HTTPS (TLS) - Therefore; public service port for the dashboard has changed to 443 - (container port 8443) and scheme to https. - </para> - </listitem> - <listitem> - <para> - The option <varname>services.kubernetes.apiserver.address</varname> was - renamed to <varname>services.kubernetes.apiserver.bindAddress</varname>. - Note that the default value has changed from 127.0.0.1 to 0.0.0.0. - </para> - </listitem> - <listitem> - <para> - The option <varname>services.kubernetes.apiserver.publicAddress</varname> - was not used and thus has been removed. - </para> - </listitem> - <listitem> - <para> - The option - <varname>services.kubernetes.addons.dashboard.enableRBAC</varname> was - renamed to - <varname>services.kubernetes.addons.dashboard.rbac.enable</varname>. - </para> - </listitem> - <listitem> - <para> - The Kubernetes Dashboard now has only minimal RBAC permissions by default. - If dashboard cluster-admin rights are desired, set - <varname>services.kubernetes.addons.dashboard.rbac.clusterAdmin</varname> - to true. On existing clusters, in order for the revocation of privileges - to take effect, the current ClusterRoleBinding for kubernetes-dashboard - must be manually removed: <literal>kubectl delete clusterrolebinding - kubernetes-dashboard</literal> - </para> - </listitem> - <listitem> - <para> - The <varname>programs.screen</varname> module provides allows to configure - <literal>/etc/screenrc</literal>, however the module behaved fairly - counterintuitive as the config exists, but the package wasn't available. - Since 18.09 <literal>pkgs.screen</literal> will be added to - <literal>environment.systemPackages</literal>. - </para> - </listitem> - <listitem> - <para> - The module <option>services.networking.hostapd</option> now uses WPA2 by - default. - </para> - </listitem> - <listitem> - <para> - <varname>s6Dns</varname>, <varname>s6Networking</varname>, - <varname>s6LinuxUtils</varname> and <varname>s6PortableUtils</varname> - renamed to <varname>s6-dns</varname>, <varname>s6-networking</varname>, - <varname>s6-linux-utils</varname> and <varname>s6-portable-utils</varname> - respectively. - </para> - </listitem> - <listitem> - <para> - The module option <option>nix.useSandbox</option> is now defaulted to - <literal>true</literal>. - </para> - </listitem> - <listitem> - <para> - The config activation script of <literal>nixos-rebuild</literal> now - <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemctl.html#Manager%20Lifecycle%20Commands">reloads</link> - all user units for each authenticated user. - </para> - </listitem> - <listitem> - <para> - The default display manager is now LightDM. To use SLiM set - <literal>services.xserver.displayManager.slim.enable</literal> to - <literal>true</literal>. - </para> - </listitem> - <listitem> - <para> - NixOS option descriptions are now automatically broken up into individual - paragraphs if the text contains two consecutive newlines, so it's no - longer necessary to use <code></para><para></code> to start a - new paragraph. - </para> - </listitem> - <listitem> - <para> - Top-level <literal>buildPlatform</literal>, - <literal>hostPlatform</literal>, and <literal>targetPlatform</literal> in - Nixpkgs are deprecated. Please use their equivalents in - <literal>stdenv</literal> instead: - <literal>stdenv.buildPlatform</literal>, - <literal>stdenv.hostPlatform</literal>, and - <literal>stdenv.targetPlatform</literal>. - </para> - </listitem> - </itemizedlist> - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1903.section.md b/nixos/doc/manual/release-notes/rl-1903.section.md new file mode 100644 index 00000000000..7637a70c1bf --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1903.section.md @@ -0,0 +1,214 @@ +# Release 19.03 ("Koi", 2019/04/11) {#sec-release-19.03} + +## Highlights {#sec-release-19.03-highlights} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- End of support is planned for end of October 2019, handing over to 19.09. + +- The default Python 3 interpreter is now CPython 3.7 instead of CPython 3.6. + +- Added the Pantheon desktop environment. It can be enabled through `services.xserver.desktopManager.pantheon.enable`. + + ::: {.note} + By default, `services.xserver.desktopManager.pantheon` enables LightDM as a display manager, as pantheon\'s screen locking implementation relies on it. + Because of that it is recommended to leave LightDM enabled. If you\'d like to disable it anyway, set `services.xserver.displayManager.lightdm.enable` to `false` and enable your preferred display manager. + ::: + + Also note that Pantheon\'s LightDM greeter is not enabled by default, because it has numerous issues in NixOS and isn\'t optimal for use here yet. + +- A major refactoring of the Kubernetes module has been completed. Refactorings primarily focus on decoupling components and enhancing security. Two-way TLS and RBAC has been enabled by default for all components, which slightly changes the way the module is configured. See: [](#sec-kubernetes) for details. + +- There is now a set of `confinement` options for `systemd.services`, which allows to restrict services into a chroot 2 ed environment that only contains the store paths from the runtime closure of the service. + +## New Services {#sec-release-19.03-new-services} + +The following new services were added since the last release: + +- `./programs/nm-applet.nix` + +- There is a new `security.googleOsLogin` module for using [OS Login](https://cloud.google.com/compute/docs/instances/managing-instance-access) to manage SSH access to Google Compute Engine instances, which supersedes the imperative and broken `google-accounts-daemon` used in `nixos/modules/virtualisation/google-compute-config.nix`. + +- `./services/misc/beanstalkd.nix` + +- There is a new `services.cockroachdb` module for running CockroachDB databases. NixOS now ships with CockroachDB 2.1.x as well, available on `x86_64-linux` and `aarch64-linux`. + +- `./security/duosec.nix` + +- The [PAM module for Duo Security](https://duo.com/docs/duounix) has been enabled for use. One can configure it using the `security.duosec` options along with the corresponding PAM option in `security.pam.services.<name?>.duoSecurity.enable`. + +## Backward Incompatibilities {#sec-release-19.03-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- The minimum version of Nix required to evaluate Nixpkgs is now 2.0. + + - For users of NixOS 18.03 and 19.03, NixOS defaults to Nix 2.0, but supports using Nix 1.11 by setting `nix.package = pkgs.nix1;`. If this option is set to a Nix 1.11 package, you will need to either unset the option or upgrade it to Nix 2.0. + + - For users of NixOS 17.09, you will first need to upgrade Nix by setting `nix.package = pkgs.nixStable2;` and run `nixos-rebuild switch` as the `root` user. + + - For users of a daemon-less Nix installation on Linux or macOS, you can upgrade Nix by running `curl -L https://nixos.org/nix/install | sh`, or prior to doing a channel update, running `nix-env -iA nix`. If you have already run a channel update and Nix is no longer able to evaluate Nixpkgs, the error message printed should provide adequate directions for upgrading Nix. + + - For users of the Nix daemon on macOS, you can upgrade Nix by running `sudo -i sh -c 'nix-channel --update && nix-env -iA nixpkgs.nix'; sudo launchctl stop org.nixos.nix-daemon; sudo launchctl start org.nixos.nix-daemon`. + +- The `buildPythonPackage` function now sets `strictDeps = true` to help distinguish between native and non-native dependencies in order to improve cross-compilation compatibility. Note however that this may break user expressions. + +- The `buildPythonPackage` function now sets `LANG = C.UTF-8` to enable Unicode support. The `glibcLocales` package is no longer needed as a build input. + +- The Syncthing state and configuration data has been moved from `services.syncthing.dataDir` to the newly defined `services.syncthing.configDir`, which default to `/var/lib/syncthing/.config/syncthing`. This change makes possible to share synced directories using ACLs without Syncthing resetting the permission on every start. + +- The `ntp` module now has sane default restrictions. If you\'re relying on the previous defaults, which permitted all queries and commands from all firewall-permitted sources, you can set `services.ntp.restrictDefault` and `services.ntp.restrictSource` to `[]`. + +- Package `rabbitmq_server` is renamed to `rabbitmq-server`. + +- The `light` module no longer uses setuid binaries, but udev rules. As a consequence users of that module have to belong to the `video` group in order to use the executable (i.e. `users.users.yourusername.extraGroups = ["video"];`). + +- Buildbot now supports Python 3 and its packages have been moved to `pythonPackages`. The options `services.buildbot-master.package` and `services.buildbot-worker.package` can be used to select the Python 2 or 3 version of the package. + +- Options `services.znc.confOptions.networks.name.userName` and `services.znc.confOptions.networks.name.modulePackages` were removed. They were never used for anything and can therefore safely be removed. + +- Package `wasm` has been renamed `proglodyte-wasm`. The package `wasm` will be pointed to `ocamlPackages.wasm` in 19.09, so make sure to update your configuration if you want to keep `proglodyte-wasm` + +- When the `nixpkgs.pkgs` option is set, NixOS will no longer ignore the `nixpkgs.overlays` option. The old behavior can be recovered by setting `nixpkgs.overlays = lib.mkForce [];`. + +- OpenSMTPD has been upgraded to version 6.4.0p1. This release makes backwards-incompatible changes to the configuration file format. See `man smtpd.conf` for more information on the new file format. + +- The versioned `postgresql` have been renamed to use underscore number seperators. For example, `postgresql96` has been renamed to `postgresql_9_6`. + +- Package `consul-ui` and passthrough `consul.ui` have been removed. The package `consul` now uses upstream releases that vendor the UI into the binary. See [\#48714](https://github.com/NixOS/nixpkgs/pull/48714#issuecomment-433454834) for details. + +- Slurm introduces the new option `services.slurm.stateSaveLocation`, which is now set to `/var/spool/slurm` by default (instead of `/var/spool`). Make sure to move all files to the new directory or to set the option accordingly. + + The slurmctld now runs as user `slurm` instead of `root`. If you want to keep slurmctld running as `root`, set `services.slurm.user = root`. + + The options `services.slurm.nodeName` and `services.slurm.partitionName` are now sets of strings to correctly reflect that fact that each of these options can occour more than once in the configuration. + +- The `solr` package has been upgraded from 4.10.3 to 7.5.0 and has undergone some major changes. The `services.solr` module has been updated to reflect these changes. Please review http://lucene.apache.org/solr/ carefully before upgrading. + +- Package `ckb` is renamed to `ckb-next`, and options `hardware.ckb.*` are renamed to `hardware.ckb-next.*`. + +- The option `services.xserver.displayManager.job.logToFile` which was previously set to `true` when using the display managers `lightdm`, `sddm` or `xpra` has been reset to the default value (`false`). + +- Network interface indiscriminate NixOS firewall options (`networking.firewall.allow*`) are now preserved when also setting interface specific rules such as `networking.firewall.interfaces.en0.allow*`. These rules continue to use the pseudo device \"default\" (`networking.firewall.interfaces.default.*`), and assigning to this pseudo device will override the (`networking.firewall.allow*`) options. + +- The `nscd` service now disables all caching of `passwd` and `group` databases by default. This was interferring with the correct functioning of the `libnss_systemd.so` module which is used by `systemd` to manage uids and usernames in the presence of `DynamicUser=` in systemd services. This was already the default behaviour in presence of `services.sssd.enable = true` because nscd caching would interfere with `sssd` in unpredictable ways as well. Because we\'re using nscd not for caching, but for convincing glibc to find NSS modules in the nix store instead of an absolute path, we have decided to disable caching globally now, as it\'s usually not the behaviour the user wants and can lead to surprising behaviour. Furthermore, negative caching of host lookups is also disabled now by default. This should fix the issue of dns lookups failing in the presence of an unreliable network. + + If the old behaviour is desired, this can be restored by setting the `services.nscd.config` option with the desired caching parameters. + + ```nix + { + services.nscd.config = + '' + server-user nscd + threads 1 + paranoia no + debug-level 0 + + enable-cache passwd yes + positive-time-to-live passwd 600 + negative-time-to-live passwd 20 + suggested-size passwd 211 + check-files passwd yes + persistent passwd no + shared passwd yes + + enable-cache group yes + positive-time-to-live group 3600 + negative-time-to-live group 60 + suggested-size group 211 + check-files group yes + persistent group no + shared group yes + + enable-cache hosts yes + positive-time-to-live hosts 600 + negative-time-to-live hosts 5 + suggested-size hosts 211 + check-files hosts yes + persistent hosts no + shared hosts yes + ''; + } + ``` + + See [\#50316](https://github.com/NixOS/nixpkgs/pull/50316) for details. + +- GitLab Shell previously used the nix store paths for the `gitlab-shell` command in its `authorized_keys` file, which might stop working after garbage collection. To circumvent that, we regenerated that file on each startup. As `gitlab-shell` has now been changed to use `/var/run/current-system/sw/bin/gitlab-shell`, this is not necessary anymore, but there might be leftover lines with a nix store path. Regenerate the `authorized_keys` file via `sudo -u git -H gitlab-rake gitlab:shell:setup` in that case. + +- The `pam_unix` account module is now loaded with its control field set to `required` instead of `sufficient`, so that later PAM account modules that might do more extensive checks are being executed. Previously, the whole account module verification was exited prematurely in case a nss module provided the account name to `pam_unix`. The LDAP and SSSD NixOS modules already add their NSS modules when enabled. In case your setup breaks due to some later PAM account module previosuly shadowed, or failing NSS lookups, please file a bug. You can get back the old behaviour by manually setting `security.pam.services.<name?>.text`. + +- The `pam_unix` password module is now loaded with its control field set to `sufficient` instead of `required`, so that password managed only by later PAM password modules are being executed. Previously, for example, changing an LDAP account\'s password through PAM was not possible: the whole password module verification was exited prematurely by `pam_unix`, preventing `pam_ldap` to manage the password as it should. + +- `fish` has been upgraded to 3.0. It comes with a number of improvements and backwards incompatible changes. See the `fish` [release notes](https://github.com/fish-shell/fish-shell/releases/tag/3.0.0) for more information. + +- The ibus-table input method has had a change in config format, which causes all previous settings to be lost. See [this commit message](https://github.com/mike-fabian/ibus-table/commit/f9195f877c5212fef0dfa446acb328c45ba5852b) for details. + +- NixOS module system type `types.optionSet` and `lib.mkOption` argument `options` are deprecated. Use `types.submodule` instead. ([\#54637](https://github.com/NixOS/nixpkgs/pull/54637)) + +- `matrix-synapse` has been updated to version 0.99. It will [no longer generate a self-signed certificate on first launch](https://github.com/matrix-org/synapse/pull/4509) and will be [the last version to accept self-signed certificates](https://matrix.org/blog/2019/02/05/synapse-0-99-0/). As such, it is now recommended to use a proper certificate verified by a root CA (for example Let\'s Encrypt). The new [manual chapter on Matrix](#module-services-matrix) contains a working example of using nginx as a reverse proxy in front of `matrix-synapse`, using Let\'s Encrypt certificates. + +- `mailutils` now works by default when `sendmail` is not in a setuid wrapper. As a consequence, the `sendmailPath` argument, having lost its main use, has been removed. + +- `graylog` has been upgraded from version 2.\* to 3.\*. Some setups making use of extraConfig (especially those exposing Graylog via reverse proxies) need to be updated as upstream removed/replaced some settings. See [Upgrading Graylog](http://docs.graylog.org/en/3.0/pages/upgrade/graylog-3.0.html#simplified-http-interface-configuration) for details. + +- The option `users.ldap.bind.password` was renamed to `users.ldap.bind.passwordFile`, and needs to be readable by the `nslcd` user. Same applies to the new `users.ldap.daemon.rootpwmodpwFile` option. + +- `nodejs-6_x` is end-of-life. `nodejs-6_x`, `nodejs-slim-6_x` and `nodePackages_6_x` are removed. + +## Other Notable Changes {#sec-release-19.03-notable-changes} + +- The `services.matomo` module gained the option `services.matomo.package` which determines the used Matomo version. + + The Matomo module now also comes with the systemd service `matomo-archive-processing.service` and a timer that automatically triggers archive processing every hour. This means that you can safely [ disable browser triggers for Matomo archiving ](https://matomo.org/docs/setup-auto-archiving/#disable-browser-triggers-for-matomo-archiving-and-limit-matomo-reports-to-updating-every-hour) at `Administration > System > General Settings`. + + Additionally, you can enable to [ delete old visitor logs ](https://matomo.org/docs/privacy/#step-2-delete-old-visitors-logs) at `Administration > System > Privacy`, but make sure that you run `systemctl start matomo-archive-processing.service` at least once without errors if you have already collected data before, so that the reports get archived before the source data gets deleted. + +- `composableDerivation` along with supporting library functions has been removed. + +- The deprecated `truecrypt` package has been removed and `truecrypt` attribute is now an alias for `veracrypt`. VeraCrypt is backward-compatible with TrueCrypt volumes. Note that `cryptsetup` also supports loading TrueCrypt volumes. + +- The Kubernetes DNS addons, kube-dns, has been replaced with CoreDNS. This change is made in accordance with Kubernetes making CoreDNS the official default starting from [Kubernetes v1.11](https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.11.md#sig-cluster-lifecycle). Please beware that upgrading DNS-addon on existing clusters might induce minor downtime while the DNS-addon terminates and re-initializes. Also note that the DNS-service now runs with 2 pod replicas by default. The desired number of replicas can be configured using: `services.kubernetes.addons.dns.replicas`. + +- The quassel-webserver package and module was removed from nixpkgs due to the lack of maintainers. + +- The manual gained a [ new chapter on self-hosting `matrix-synapse` and `riot-web` ](#module-services-matrix), the most prevalent server and client implementations for the [Matrix](https://matrix.org/) federated communication network. + +- The astah-community package was removed from nixpkgs due to it being discontinued and the downloads not being available anymore. + +- The httpd service now saves log files with a .log file extension by default for easier integration with the logrotate service. + +- The owncloud server packages and httpd subservice module were removed from nixpkgs due to the lack of maintainers. + +- It is possible now to uze ZRAM devices as general purpose ephemeral block devices, not only as swap. Using more than 1 device as ZRAM swap is no longer recommended, but is still possible by setting `zramSwap.swapDevices` explicitly. + + ZRAM algorithm can be changed now. + + Changes to ZRAM algorithm are applied during `nixos-rebuild switch`, so make sure you have enough swap space on disk to survive ZRAM device rebuild. Alternatively, use `nixos-rebuild boot; reboot`. + +- Flat volumes are now disabled by default in `hardware.pulseaudio`. This has been done to prevent applications, which are unaware of this feature, setting their volumes to 100% on startup causing harm to your audio hardware and potentially your ears. + + ::: {.note} + With this change application specific volumes are relative to the master volume which can be adjusted independently, whereas before they were absolute; meaning that in effect, it scaled the device-volume with the volume of the loudest application. + ::: + +- The [`ndppd`](https://github.com/DanielAdolfsson/ndppd) module now supports [all config options](options.html#opt-services.ndppd.enable) provided by the current upstream version as service options. Additionally the `ndppd` package doesn\'t contain the systemd unit configuration from upstream anymore, the unit is completely configured by the NixOS module now. + +- New installs of NixOS will default to the Redmine 4.x series unless otherwise specified in `services.redmine.package` while existing installs of NixOS will default to the Redmine 3.x series. + +- The [Grafana module](options.html#opt-services.grafana.enable) now supports declarative [datasource and dashboard](http://docs.grafana.org/administration/provisioning/) provisioning. + +- The use of insecure ports on kubernetes has been deprecated. Thus options: `services.kubernetes.apiserver.port` and `services.kubernetes.controllerManager.port` has been renamed to `.insecurePort`, and default of both options has changed to 0 (disabled). + +- Note that the default value of `services.kubernetes.apiserver.bindAddress` has changed from 127.0.0.1 to 0.0.0.0, allowing the apiserver to be accessible from outside the master node itself. If the apiserver insecurePort is enabled, it is strongly recommended to only bind on the loopback interface. See: `services.kubernetes.apiserver.insecurebindAddress`. + +- The option `services.kubernetes.apiserver.allowPrivileged` and `services.kubernetes.kubelet.allowPrivileged` now defaults to false. Disallowing privileged containers on the cluster. + +- The kubernetes module does no longer add the kubernetes package to `environment.systemPackages` implicitly. + +- The `intel` driver has been removed from the default list of [X.org video drivers](options.html#opt-services.xserver.videoDrivers). The `modesetting` driver should take over automatically, it is better maintained upstream and has less problems with advanced X11 features. This can lead to a change in the output names used by `xrandr`. Some performance regressions on some GPU models might happen. Some OpenCL and VA-API applications might also break (Beignet seems to provide OpenCL support with `modesetting` driver, too). Kernel mode setting API does not support backlight control, so `xbacklight` tool will not work; backlight level can be controlled directly via `/sys/` or with `brightnessctl`. Users who need this functionality more than multi-output XRandR are advised to add \`intel\` to \`videoDrivers\` and report an issue (or provide additional details in an existing one) + +- Openmpi has been updated to version 4.0.0, which removes some deprecated MPI-1 symbols. This may break some older applications that still rely on those symbols. An upgrade guide can be found [here](https://www.open-mpi.org/faq/?category=mpi-removed). + + The nginx package now relies on OpenSSL 1.1 and supports TLS 1.3 by default. You can set the protocols used by the nginx service using [services.nginx.sslProtocols](options.html#opt-services.nginx.sslProtocols). + +- A new subcommand `nixos-rebuild edit` was added. diff --git a/nixos/doc/manual/release-notes/rl-1903.xml b/nixos/doc/manual/release-notes/rl-1903.xml deleted file mode 100644 index 5593cb3e5df..00000000000 --- a/nixos/doc/manual/release-notes/rl-1903.xml +++ /dev/null @@ -1,768 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.03"> - <title>Release 19.03 (“Koi”, 2019/04/11)</title> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.03-highlights"> - <title>Highlights</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - End of support is planned for end of October 2019, handing over to 19.09. - </para> - </listitem> - <listitem> - <para> - The default Python 3 interpreter is now CPython 3.7 instead of CPython - 3.6. - </para> - </listitem> - <listitem> - <para> - Added the Pantheon desktop environment. It can be enabled through - <varname>services.xserver.desktopManager.pantheon.enable</varname>. - </para> - <note> - <para> - By default, <varname>services.xserver.desktopManager.pantheon</varname> - enables LightDM as a display manager, as pantheon's screen locking - implementation relies on it. - </para> - <para> - Because of that it is recommended to leave LightDM enabled. If you'd like - to disable it anyway, set - <option>services.xserver.displayManager.lightdm.enable</option> to - <literal>false</literal> and enable your preferred display manager. - </para> - </note> - <para> - Also note that Pantheon's LightDM greeter is not enabled by default, - because it has numerous issues in NixOS and isn't optimal for use here - yet. - </para> - </listitem> - <listitem> - <para> - A major refactoring of the Kubernetes module has been completed. - Refactorings primarily focus on decoupling components and enhancing - security. Two-way TLS and RBAC has been enabled by default for all - components, which slightly changes the way the module is configured. See: - <xref linkend="sec-kubernetes"/> for details. - </para> - </listitem> - <listitem> - <para> - There is now a set of <option>confinement</option> options for - <option>systemd.services</option>, which allows to restrict services - into a <citerefentry> - <refentrytitle>chroot</refentrytitle> - <manvolnum>2</manvolnum> - </citerefentry>ed environment that only contains the store paths from - the runtime closure of the service. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.03-new-services"> - <title>New Services</title> - - <para> - The following new services were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>./programs/nm-applet.nix</literal> - </para> - </listitem> - <listitem> - <para> - There is a new <varname>security.googleOsLogin</varname> module for using - <link xlink:href="https://cloud.google.com/compute/docs/instances/managing-instance-access">OS - Login</link> to manage SSH access to Google Compute Engine instances, - which supersedes the imperative and broken - <literal>google-accounts-daemon</literal> used in - <literal>nixos/modules/virtualisation/google-compute-config.nix</literal>. - </para> - </listitem> - <listitem> - <para> - <literal>./services/misc/beanstalkd.nix</literal> - </para> - </listitem> - <listitem> - <para> - There is a new <varname>services.cockroachdb</varname> module for running - CockroachDB databases. NixOS now ships with CockroachDB 2.1.x as well, - available on <literal>x86_64-linux</literal> and - <literal>aarch64-linux</literal>. - </para> - </listitem> - </itemizedlist> - - <itemizedlist> - <listitem> - <para> - <literal>./security/duosec.nix</literal> - </para> - </listitem> - <listitem> - <para> - The <link xlink:href="https://duo.com/docs/duounix">PAM module for Duo - Security</link> has been enabled for use. One can configure it using the - <option>security.duosec</option> options along with the corresponding PAM - option in - <option>security.pam.services.<name?>.duoSecurity.enable</option>. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.03-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - The minimum version of Nix required to evaluate Nixpkgs is now 2.0. - </para> - <itemizedlist> - <listitem> - <para> - For users of NixOS 18.03 and 19.03, NixOS defaults to Nix 2.0, but - supports using Nix 1.11 by setting <literal>nix.package = - pkgs.nix1;</literal>. If this option is set to a Nix 1.11 package, you - will need to either unset the option or upgrade it to Nix 2.0. - </para> - </listitem> - <listitem> - <para> - For users of NixOS 17.09, you will first need to upgrade Nix by setting - <literal>nix.package = pkgs.nixStable2;</literal> and run - <command>nixos-rebuild switch</command> as the <literal>root</literal> - user. - </para> - </listitem> - <listitem> - <para> - For users of a daemon-less Nix installation on Linux or macOS, you can - upgrade Nix by running <command>curl -L https://nixos.org/nix/install | - sh</command>, or prior to doing a channel update, running - <command>nix-env -iA nix</command>. - </para> - <para> - If you have already run a channel update and Nix is no longer able to - evaluate Nixpkgs, the error message printed should provide adequate - directions for upgrading Nix. - </para> - </listitem> - <listitem> - <para> - For users of the Nix daemon on macOS, you can upgrade Nix by running - <command>sudo -i sh -c 'nix-channel --update && nix-env -iA - nixpkgs.nix'; sudo launchctl stop org.nixos.nix-daemon; sudo launchctl - start org.nixos.nix-daemon</command>. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - The <varname>buildPythonPackage</varname> function now sets - <varname>strictDeps = true</varname> to help distinguish between native - and non-native dependencies in order to improve cross-compilation - compatibility. Note however that this may break user expressions. - </para> - </listitem> - <listitem> - <para> - The <varname>buildPythonPackage</varname> function now sets <varname>LANG - = C.UTF-8</varname> to enable Unicode support. The - <varname>glibcLocales</varname> package is no longer needed as a build - input. - </para> - </listitem> - <listitem> - <para> - The Syncthing state and configuration data has been moved from - <varname>services.syncthing.dataDir</varname> to the newly defined - <varname>services.syncthing.configDir</varname>, which default to - <literal>/var/lib/syncthing/.config/syncthing</literal>. This change makes - possible to share synced directories using ACLs without Syncthing - resetting the permission on every start. - </para> - </listitem> - <listitem> - <para> - The <literal>ntp</literal> module now has sane default restrictions. If - you're relying on the previous defaults, which permitted all queries and - commands from all firewall-permitted sources, you can set - <varname>services.ntp.restrictDefault</varname> and - <varname>services.ntp.restrictSource</varname> to <literal>[]</literal>. - </para> - </listitem> - <listitem> - <para> - Package <varname>rabbitmq_server</varname> is renamed to - <varname>rabbitmq-server</varname>. - </para> - </listitem> - <listitem> - <para> - The <literal>light</literal> module no longer uses setuid binaries, but - udev rules. As a consequence users of that module have to belong to the - <literal>video</literal> group in order to use the executable (i.e. - <literal>users.users.yourusername.extraGroups = ["video"];</literal>). - </para> - </listitem> - <listitem> - <para> - Buildbot now supports Python 3 and its packages have been moved to - <literal>pythonPackages</literal>. The options - <option>services.buildbot-master.package</option> and - <option>services.buildbot-worker.package</option> can be used to select - the Python 2 or 3 version of the package. - </para> - </listitem> - <listitem> - <para> - Options - <literal>services.znc.confOptions.networks.<replaceable>name</replaceable>.userName</literal> - and - <literal>services.znc.confOptions.networks.<replaceable>name</replaceable>.modulePackages</literal> - were removed. They were never used for anything and can therefore safely - be removed. - </para> - </listitem> - <listitem> - <para> - Package <literal>wasm</literal> has been renamed - <literal>proglodyte-wasm</literal>. The package <literal>wasm</literal> - will be pointed to <literal>ocamlPackages.wasm</literal> in 19.09, so make - sure to update your configuration if you want to keep - <literal>proglodyte-wasm</literal> - </para> - </listitem> - <listitem> - <para> - When the <literal>nixpkgs.pkgs</literal> option is set, NixOS will no - longer ignore the <literal>nixpkgs.overlays</literal> option. The old - behavior can be recovered by setting <literal>nixpkgs.overlays = - lib.mkForce [];</literal>. - </para> - </listitem> - <listitem> - <para> - OpenSMTPD has been upgraded to version 6.4.0p1. This release makes - backwards-incompatible changes to the configuration file format. See - <command>man smtpd.conf</command> for more information on the new file - format. - </para> - </listitem> - <listitem> - <para> - The versioned <varname>postgresql</varname> have been renamed to use - underscore number seperators. For example, <varname>postgresql96</varname> - has been renamed to <varname>postgresql_9_6</varname>. - </para> - </listitem> - <listitem> - <para> - Package <literal>consul-ui</literal> and passthrough - <literal>consul.ui</literal> have been removed. The package - <literal>consul</literal> now uses upstream releases that vendor the UI - into the binary. See - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/48714#issuecomment-433454834">#48714</link> - for details. - </para> - </listitem> - <listitem> - <para> - Slurm introduces the new option - <literal>services.slurm.stateSaveLocation</literal>, which is now set to - <literal>/var/spool/slurm</literal> by default (instead of - <literal>/var/spool</literal>). Make sure to move all files to the new - directory or to set the option accordingly. - </para> - <para> - The slurmctld now runs as user <literal>slurm</literal> instead of - <literal>root</literal>. If you want to keep slurmctld running as - <literal>root</literal>, set <literal>services.slurm.user = - root</literal>. - </para> - <para> - The options <literal>services.slurm.nodeName</literal> and - <literal>services.slurm.partitionName</literal> are now sets of strings to - correctly reflect that fact that each of these options can occour more - than once in the configuration. - </para> - </listitem> - <listitem> - <para> - The <literal>solr</literal> package has been upgraded from 4.10.3 to 7.5.0 - and has undergone some major changes. The <literal>services.solr</literal> - module has been updated to reflect these changes. Please review - http://lucene.apache.org/solr/ carefully before upgrading. - </para> - </listitem> - <listitem> - <para> - Package <literal>ckb</literal> is renamed to <literal>ckb-next</literal>, - and options <literal>hardware.ckb.*</literal> are renamed to - <literal>hardware.ckb-next.*</literal>. - </para> - </listitem> - <listitem> - <para> - The option - <literal>services.xserver.displayManager.job.logToFile</literal> which was - previously set to <literal>true</literal> when using the display managers - <literal>lightdm</literal>, <literal>sddm</literal> or - <literal>xpra</literal> has been reset to the default value - (<literal>false</literal>). - </para> - </listitem> - <listitem> - <para> - Network interface indiscriminate NixOS firewall options - (<literal>networking.firewall.allow*</literal>) are now preserved when - also setting interface specific rules such as - <literal>networking.firewall.interfaces.en0.allow*</literal>. These rules - continue to use the pseudo device "default" - (<literal>networking.firewall.interfaces.default.*</literal>), and - assigning to this pseudo device will override the - (<literal>networking.firewall.allow*</literal>) options. - </para> - </listitem> - <listitem> - <para> - The <literal>nscd</literal> service now disables all caching of - <literal>passwd</literal> and <literal>group</literal> databases by - default. This was interferring with the correct functioning of the - <literal>libnss_systemd.so</literal> module which is used by - <literal>systemd</literal> to manage uids and usernames in the presence of - <literal>DynamicUser=</literal> in systemd services. This was already the - default behaviour in presence of <literal>services.sssd.enable = - true</literal> because nscd caching would interfere with - <literal>sssd</literal> in unpredictable ways as well. Because we're using - nscd not for caching, but for convincing glibc to find NSS modules in the - nix store instead of an absolute path, we have decided to disable caching - globally now, as it's usually not the behaviour the user wants and can - lead to surprising behaviour. Furthermore, negative caching of host - lookups is also disabled now by default. This should fix the issue of dns - lookups failing in the presence of an unreliable network. - </para> - <para> - If the old behaviour is desired, this can be restored by setting the - <literal>services.nscd.config</literal> option with the desired caching - parameters. -<programlisting> - services.nscd.config = - '' - server-user nscd - threads 1 - paranoia no - debug-level 0 - - enable-cache passwd yes - positive-time-to-live passwd 600 - negative-time-to-live passwd 20 - suggested-size passwd 211 - check-files passwd yes - persistent passwd no - shared passwd yes - - enable-cache group yes - positive-time-to-live group 3600 - negative-time-to-live group 60 - suggested-size group 211 - check-files group yes - persistent group no - shared group yes - - enable-cache hosts yes - positive-time-to-live hosts 600 - negative-time-to-live hosts 5 - suggested-size hosts 211 - check-files hosts yes - persistent hosts no - shared hosts yes - ''; - </programlisting> - See - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/50316">#50316</link> - for details. - </para> - </listitem> - <listitem> - <para> - GitLab Shell previously used the nix store paths for the - <literal>gitlab-shell</literal> command in its - <literal>authorized_keys</literal> file, which might stop working after - garbage collection. To circumvent that, we regenerated that file on each - startup. As <literal>gitlab-shell</literal> has now been changed to use - <literal>/var/run/current-system/sw/bin/gitlab-shell</literal>, this is - not necessary anymore, but there might be leftover lines with a nix store - path. Regenerate the <literal>authorized_keys</literal> file via - <command>sudo -u git -H gitlab-rake gitlab:shell:setup</command> in that - case. - </para> - </listitem> - <listitem> - <para> - The <literal>pam_unix</literal> account module is now loaded with its - control field set to <literal>required</literal> instead of - <literal>sufficient</literal>, so that later PAM account modules that - might do more extensive checks are being executed. Previously, the whole - account module verification was exited prematurely in case a nss module - provided the account name to <literal>pam_unix</literal>. The LDAP and - SSSD NixOS modules already add their NSS modules when enabled. In case - your setup breaks due to some later PAM account module previosuly - shadowed, or failing NSS lookups, please file a bug. You can get back the - old behaviour by manually setting <literal> -<![CDATA[security.pam.services.<name?>.text]]> - </literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>pam_unix</literal> password module is now loaded with its - control field set to <literal>sufficient</literal> instead of - <literal>required</literal>, so that password managed only by later PAM - password modules are being executed. Previously, for example, changing an - LDAP account's password through PAM was not possible: the whole password - module verification was exited prematurely by <literal>pam_unix</literal>, - preventing <literal>pam_ldap</literal> to manage the password as it - should. - </para> - </listitem> - <listitem> - <para> - <literal>fish</literal> has been upgraded to 3.0. It comes with a number - of improvements and backwards incompatible changes. See the - <literal>fish</literal> - <link xlink:href="https://github.com/fish-shell/fish-shell/releases/tag/3.0.0">release - notes</link> for more information. - </para> - </listitem> - <listitem> - <para> - The ibus-table input method has had a change in config format, which - causes all previous settings to be lost. See - <link xlink:href="https://github.com/mike-fabian/ibus-table/commit/f9195f877c5212fef0dfa446acb328c45ba5852b">this - commit message</link> for details. - </para> - </listitem> - <listitem> - <para> - NixOS module system type <literal>types.optionSet</literal> and - <literal>lib.mkOption</literal> argument <literal>options</literal> are - deprecated. Use <literal>types.submodule</literal> instead. - (<link xlink:href="https://github.com/NixOS/nixpkgs/pull/54637">#54637</link>) - </para> - </listitem> - <listitem> - <para> - <literal>matrix-synapse</literal> has been updated to version 0.99. It - will <link xlink:href="https://github.com/matrix-org/synapse/pull/4509">no - longer generate a self-signed certificate on first launch</link> and will - be - <link xlink:href="https://matrix.org/blog/2019/02/05/synapse-0-99-0/">the - last version to accept self-signed certificates</link>. As such, it is now - recommended to use a proper certificate verified by a root CA (for example - Let's Encrypt). The new <link linkend="module-services-matrix">manual - chapter on Matrix</link> contains a working example of using nginx as a - reverse proxy in front of <literal>matrix-synapse</literal>, using Let's - Encrypt certificates. - </para> - </listitem> - <listitem> - <para> - <literal>mailutils</literal> now works by default when - <literal>sendmail</literal> is not in a setuid wrapper. As a consequence, - the <literal>sendmailPath</literal> argument, having lost its main use, - has been removed. - </para> - </listitem> - <listitem> - <para> - <literal>graylog</literal> has been upgraded from version 2.* to 3.*. Some - setups making use of extraConfig (especially those exposing Graylog via - reverse proxies) need to be updated as upstream removed/replaced some - settings. See - <link xlink:href="http://docs.graylog.org/en/3.0/pages/upgrade/graylog-3.0.html#simplified-http-interface-configuration">Upgrading - Graylog</link> for details. - </para> - </listitem> - <listitem> - <para> - The option <literal>users.ldap.bind.password</literal> was renamed to <literal>users.ldap.bind.passwordFile</literal>, - and needs to be readable by the <literal>nslcd</literal> user. - Same applies to the new <literal>users.ldap.daemon.rootpwmodpwFile</literal> option. - </para> - </listitem> - <listitem> - <para> - <literal>nodejs-6_x</literal> is end-of-life. - <literal>nodejs-6_x</literal>, <literal>nodejs-slim-6_x</literal> and - <literal>nodePackages_6_x</literal> are removed. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.03-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para> - The <option>services.matomo</option> module gained the option - <option>services.matomo.package</option> which determines the used Matomo - version. - </para> - <para> - The Matomo module now also comes with the systemd service - <literal>matomo-archive-processing.service</literal> and a timer that - automatically triggers archive processing every hour. This means that you - can safely - <link xlink:href="https://matomo.org/docs/setup-auto-archiving/#disable-browser-triggers-for-matomo-archiving-and-limit-matomo-reports-to-updating-every-hour"> - disable browser triggers for Matomo archiving </link> at - <literal>Administration > System > General Settings</literal>. - </para> - <para> - Additionally, you can enable to - <link xlink:href="https://matomo.org/docs/privacy/#step-2-delete-old-visitors-logs"> - delete old visitor logs </link> at <literal>Administration > System > - Privacy</literal>, but make sure that you run <literal>systemctl start - matomo-archive-processing.service</literal> at least once without errors - if you have already collected data before, so that the reports get - archived before the source data gets deleted. - </para> - </listitem> - <listitem> - <para> - <literal>composableDerivation</literal> along with supporting library - functions has been removed. - </para> - </listitem> - <listitem> - <para> - The deprecated <literal>truecrypt</literal> package has been removed and - <literal>truecrypt</literal> attribute is now an alias for - <literal>veracrypt</literal>. VeraCrypt is backward-compatible with - TrueCrypt volumes. Note that <literal>cryptsetup</literal> also supports - loading TrueCrypt volumes. - </para> - </listitem> - <listitem> - <para> - The Kubernetes DNS addons, kube-dns, has been replaced with CoreDNS. This - change is made in accordance with Kubernetes making CoreDNS the official - default starting from - <link xlink:href="https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.11.md#sig-cluster-lifecycle">Kubernetes - v1.11</link>. Please beware that upgrading DNS-addon on existing clusters - might induce minor downtime while the DNS-addon terminates and - re-initializes. Also note that the DNS-service now runs with 2 pod - replicas by default. The desired number of replicas can be configured - using: <option>services.kubernetes.addons.dns.replicas</option>. - </para> - </listitem> - <listitem> - <para> - The quassel-webserver package and module was removed from nixpkgs due to - the lack of maintainers. - </para> - </listitem> - <listitem> - <para> - The manual gained a <link linkend="module-services-matrix"> new chapter on - self-hosting <literal>matrix-synapse</literal> and - <literal>riot-web</literal> </link>, the most prevalent server and client - implementations for the - <link xlink:href="https://matrix.org/">Matrix</link> federated - communication network. - </para> - </listitem> - <listitem> - <para> - The astah-community package was removed from nixpkgs due to it being - discontinued and the downloads not being available anymore. - </para> - </listitem> - <listitem> - <para> - The httpd service now saves log files with a .log file extension by - default for easier integration with the logrotate service. - </para> - </listitem> - <listitem> - <para> - The owncloud server packages and httpd subservice module were removed from - nixpkgs due to the lack of maintainers. - </para> - </listitem> - <listitem> - <para> - It is possible now to uze ZRAM devices as general purpose ephemeral block - devices, not only as swap. Using more than 1 device as ZRAM swap is no - longer recommended, but is still possible by setting - <literal>zramSwap.swapDevices</literal> explicitly. - </para> - <para> - ZRAM algorithm can be changed now. - </para> - <para> - Changes to ZRAM algorithm are applied during <literal>nixos-rebuild - switch</literal>, so make sure you have enough swap space on disk to - survive ZRAM device rebuild. Alternatively, use <literal>nixos-rebuild - boot; reboot</literal>. - </para> - </listitem> - <listitem> - <para> - Flat volumes are now disabled by default in - <literal>hardware.pulseaudio</literal>. This has been done to prevent - applications, which are unaware of this feature, setting their volumes to - 100% on startup causing harm to your audio hardware and potentially your - ears. - </para> - <note> - <para> - With this change application specific volumes are relative to the master - volume which can be adjusted independently, whereas before they were - absolute; meaning that in effect, it scaled the device-volume with the - volume of the loudest application. - </para> - </note> - </listitem> - <listitem> - <para> - The - <link xlink:href="https://github.com/DanielAdolfsson/ndppd"><literal>ndppd</literal></link> - module now supports <link linkend="opt-services.ndppd.enable">all config - options</link> provided by the current upstream version as service - options. Additionally the <literal>ndppd</literal> package doesn't contain - the systemd unit configuration from upstream anymore, the unit is - completely configured by the NixOS module now. - </para> - </listitem> - <listitem> - <para> - New installs of NixOS will default to the Redmine 4.x series unless - otherwise specified in <literal>services.redmine.package</literal> while - existing installs of NixOS will default to the Redmine 3.x series. - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-services.grafana.enable">Grafana module</link> now - supports declarative - <link xlink:href="http://docs.grafana.org/administration/provisioning/">datasource - and dashboard</link> provisioning. - </para> - </listitem> - <listitem> - <para> - The use of insecure ports on kubernetes has been deprecated. Thus options: - <varname>services.kubernetes.apiserver.port</varname> and - <varname>services.kubernetes.controllerManager.port</varname> has been - renamed to <varname>.insecurePort</varname>, and default of both options - has changed to 0 (disabled). - </para> - </listitem> - <listitem> - <para> - Note that the default value of - <varname>services.kubernetes.apiserver.bindAddress</varname> has changed - from 127.0.0.1 to 0.0.0.0, allowing the apiserver to be accessible from - outside the master node itself. If the apiserver insecurePort is enabled, - it is strongly recommended to only bind on the loopback interface. See: - <varname>services.kubernetes.apiserver.insecurebindAddress</varname>. - </para> - </listitem> - <listitem> - <para> - The option - <varname>services.kubernetes.apiserver.allowPrivileged</varname> and - <varname>services.kubernetes.kubelet.allowPrivileged</varname> now - defaults to false. Disallowing privileged containers on the cluster. - </para> - </listitem> - <listitem> - <para> - The kubernetes module does no longer add the kubernetes package to - <varname>environment.systemPackages</varname> implicitly. - </para> - </listitem> - <listitem> - <para> - The <literal>intel</literal> driver has been removed from the default list - of <link linkend="opt-services.xserver.videoDrivers">X.org video - drivers</link>. The <literal>modesetting</literal> driver should take over - automatically, it is better maintained upstream and has less problems with - advanced X11 features. This can lead to a change in the output names used - by <literal>xrandr</literal>. Some performance regressions on some GPU - models might happen. Some OpenCL and VA-API applications might also break - (Beignet seems to provide OpenCL support with - <literal>modesetting</literal> driver, too). Kernel mode setting API does - not support backlight control, so <literal>xbacklight</literal> tool will - not work; backlight level can be controlled directly via - <literal>/sys/</literal> or with <literal>brightnessctl</literal>. Users - who need this functionality more than multi-output XRandR are advised to - add `intel` to `videoDrivers` and report an issue (or provide additional - details in an existing one) - </para> - </listitem> - <listitem> - <para> - Openmpi has been updated to version 4.0.0, which removes some deprecated - MPI-1 symbols. This may break some older applications that still rely on - those symbols. An upgrade guide can be found - <link xlink:href="https://www.open-mpi.org/faq/?category=mpi-removed">here</link>. - </para> - <para> - The nginx package now relies on OpenSSL 1.1 and supports TLS 1.3 by - default. You can set the protocols used by the nginx service using - <xref linkend="opt-services.nginx.sslProtocols"/>. - </para> - </listitem> - <listitem> - <para> - A new subcommand <command>nixos-rebuild edit</command> was added. - </para> - </listitem> - </itemizedlist> - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-1909.section.md b/nixos/doc/manual/release-notes/rl-1909.section.md new file mode 100644 index 00000000000..572f1bf5a25 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-1909.section.md @@ -0,0 +1,313 @@ +# Release 19.09 ("Loris", 2019/10/09) {#sec-release-19.09} + +## Highlights {#sec-release-19.09-highlights} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- End of support is planned for end of April 2020, handing over to 20.03. + +- Nix has been updated to 2.3; see its [release notes](https://nixos.org/nix/manual/#ssec-relnotes-2.3). + +- Core version changes: + + systemd: 239 -\> 243 + + gcc: 7 -\> 8 + + glibc: 2.27 (unchanged) + + linux: 4.19 LTS (unchanged) + + openssl: 1.0 -\> 1.1 + +- Desktop version changes: + + plasma5: 5.14 -\> 5.16 + + gnome3: 3.30 -\> 3.32 + +- PHP now defaults to PHP 7.3, updated from 7.2. + +- PHP 7.1 is no longer supported due to upstream not supporting this version for the entire lifecycle of the 19.09 release. + +- The binfmt module is now easier to use. Additional systems can be added through `boot.binfmt.emulatedSystems`. For instance, `boot.binfmt.emulatedSystems = [ "wasm32-wasi" "x86_64-windows" "aarch64-linux" ];` will set up binfmt interpreters for each of those listed systems. + +- The installer now uses a less privileged `nixos` user whereas before we logged in as root. To gain root privileges use `sudo -i` without a password. + +- We\'ve updated to Xfce 4.14, which brings a new module `services.xserver.desktopManager.xfce4-14`. If you\'d like to upgrade, please switch from the `services.xserver.desktopManager.xfce` module as it will be deprecated in a future release. They\'re incompatibilities with the current Xfce module; it doesn\'t support `thunarPlugins` and it isn\'t recommended to use `services.xserver.desktopManager.xfce` and `services.xserver.desktopManager.xfce4-14` simultaneously or to downgrade from Xfce 4.14 after upgrading. + +- The GNOME 3 desktop manager module sports an interface to enable/disable core services, applications, and optional GNOME packages like games. + + - `services.gnome3.core-os-services.enable` + + - `services.gnome3.core-shell.enable` + + - `services.gnome3.core-utilities.enable` + + - `services.gnome3.games.enable` + + With these options we hope to give users finer grained control over their systems. Prior to this change you\'d either have to manually disable options or use `environment.gnome3.excludePackages` which only excluded the optional applications. `environment.gnome3.excludePackages` is now unguarded, it can exclude any package installed with `environment.systemPackages` in the GNOME 3 module. + +- Orthogonal to the previous changes to the GNOME 3 desktop manager module, we\'ve updated all default services and applications to match as close as possible to a default reference GNOME 3 experience. + + **The following changes were enacted in `services.gnome3.core-utilities.enable`** + + - `accerciser` + + - `dconf-editor` + + - `evolution` + + - `gnome-documents` + + - `gnome-nettool` + + - `gnome-power-manager` + + - `gnome-todo` + + - `gnome-tweaks` + + - `gnome-usage` + + - `gucharmap` + + - `nautilus-sendto` + + - `vinagre` + + - `cheese` + + - `geary` + + **The following changes were enacted in `services.gnome3.core-shell.enable`** + + - `gnome-color-manager` + + - `orca` + + - `services.avahi.enable` + +## New Services {#sec-release-19.09-new-services} + +The following new services were added since the last release: + +- `./programs/dwm-status.nix` + +- The new `hardware.printers` module allows to declaratively configure CUPS printers via the `ensurePrinters` and `ensureDefaultPrinter` options. `ensurePrinters` will never delete existing printers, but will make sure that the given printers are configured as declared. + +- There is a new [services.system-config-printer.enable](options.html#opt-services.system-config-printer.enable) and [programs.system-config-printer.enable](options.html#opt-programs.system-config-printer.enable) module for the program of the same name. If you previously had `system-config-printer` enabled through some other means you should migrate to using one of these modules. + + - `services.xserver.desktopManager.plasma5` + + - `services.xserver.desktopManager.gnome3` + + - `services.xserver.desktopManager.pantheon` + + - `services.xserver.desktopManager.mate` Note Mate uses `programs.system-config-printer` as it doesn\'t use it as a service, but its graphical interface directly. + +- [services.blueman.enable](options.html#opt-services.blueman.enable) has been added. If you previously had blueman installed via `environment.systemPackages` please migrate to using the NixOS module, as this would result in an insufficiently configured blueman. + +## Backward Incompatibilities {#sec-release-19.09-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- Buildbot no longer supports Python 2, as support was dropped upstream in version 2.0.0. Configurations may need to be modified to make them compatible with Python 3. + +- PostgreSQL now uses `/run/postgresql` as its socket directory instead of `/tmp`. So if you run an application like eg. Nextcloud, where you need to use the Unix socket path as the database host name, you need to change it accordingly. + +- PostgreSQL 9.4 is scheduled EOL during the 19.09 life cycle and has been removed. + +- The options `services.prometheus.alertmanager.user` and `services.prometheus.alertmanager.group` have been removed because the alertmanager service is now using systemd\'s [ DynamicUser mechanism](http://0pointer.net/blog/dynamic-users-with-systemd.html) which obviates these options. + +- The NetworkManager systemd unit was renamed back from network-manager.service to NetworkManager.service for better compatibility with other applications expecting this name. The same applies to ModemManager where modem-manager.service is now called ModemManager.service again. + +- The `services.nzbget.configFile` and `services.nzbget.openFirewall` options were removed as they are managed internally by the nzbget. The `services.nzbget.dataDir` option hadn\'t actually been used by the module for some time and so was removed as cleanup. + +- The `services.mysql.pidDir` option was removed, as it was only used by the wordpress apache-httpd service to wait for mysql to have started up. This can be accomplished by either describing a dependency on mysql.service (preferred) or waiting for the (hardcoded) `/run/mysqld/mysql.sock` file to appear. + +- The `services.emby.enable` module has been removed, see `services.jellyfin.enable` instead for a free software fork of Emby. See the Jellyfin documentation: [ Migrating from Emby to Jellyfin ](https://jellyfin.readthedocs.io/en/latest/administrator-docs/migrate-from-emby/) + +- IPv6 Privacy Extensions are now enabled by default for undeclared interfaces. The previous behaviour was quite misleading --- even though the default value for `networking.interfaces.*.preferTempAddress` was `true`, undeclared interfaces would not prefer temporary addresses. Now, interfaces not mentioned in the config will prefer temporary addresses. EUI64 addresses can still be set as preferred by explicitly setting the option to `false` for the interface in question. + +- Since Bittorrent Sync was superseded by Resilio Sync in 2016, the `bittorrentSync`, `bittorrentSync14`, and `bittorrentSync16` packages have been removed in favor of `resilio-sync`. + + The corresponding module, `services.btsync` has been replaced by the `services.resilio` module. + +- The httpd service no longer attempts to start the postgresql service. If you have come to depend on this behaviour then you can preserve the behavior with the following configuration: `systemd.services.httpd.after = [ "postgresql.service" ];` + + The option `services.httpd.extraSubservices` has been marked as deprecated. You may still use this feature, but it will be removed in a future release of NixOS. You are encouraged to convert any httpd subservices you may have written to a full NixOS module. + + Most of the httpd subservices packaged with NixOS have been replaced with full NixOS modules including LimeSurvey, WordPress, and Zabbix. These modules can be enabled using the `services.limesurvey.enable`, `services.mediawiki.enable`, `services.wordpress.enable`, and `services.zabbixWeb.enable` options. + +- The option `systemd.network.networks.<name>.routes.*.routeConfig.GatewayOnlink` was renamed to `systemd.network.networks.<name>.routes.*.routeConfig.GatewayOnLink` (capital `L`). This follows [ upstreams renaming ](https://github.com/systemd/systemd/commit/9cb8c5593443d24c19e40bfd4fc06d672f8c554c) of the setting. + +- As of this release the NixOps feature `autoLuks` is deprecated. It no longer works with our systemd version without manual intervention. + + Whenever the usage of the module is detected the evaluation will fail with a message explaining why and how to deal with the situation. + + A new knob named `nixops.enableDeprecatedAutoLuks` has been introduced to disable the eval failure and to acknowledge the notice was received and read. If you plan on using the feature please note that it might break with subsequent updates. + + Make sure you set the `_netdev` option for each of the file systems referring to block devices provided by the autoLuks module. Not doing this might render the system in a state where it doesn\'t boot anymore. + + If you are actively using the `autoLuks` module please let us know in [issue \#62211](https://github.com/NixOS/nixpkgs/issues/62211). + +- The setopt declarations will be evaluated at the end of `/etc/zshrc`, so any code in [programs.zsh.interactiveShellInit](options.html#opt-programs.zsh.interactiveShellInit), [programs.zsh.loginShellInit](options.html#opt-programs.zsh.loginShellInit) and [programs.zsh.promptInit](options.html#opt-programs.zsh.promptInit) may break if it relies on those options being set. + +- The `prometheus-nginx-exporter` package now uses the offical exporter provided by NGINX Inc. Its metrics are differently structured and are incompatible to the old ones. For information about the metrics, have a look at the [official repo](https://github.com/nginxinc/nginx-prometheus-exporter). + +- The `shibboleth-sp` package has been updated to version 3. It is largely backward compatible, for further information refer to the [release notes](https://wiki.shibboleth.net/confluence/display/SP3/ReleaseNotes) and [upgrade guide](https://wiki.shibboleth.net/confluence/display/SP3/UpgradingFromV2). + + Nodejs 8 is scheduled EOL under the lifetime of 19.09 and has been dropped. + +- By default, prometheus exporters are now run with `DynamicUser` enabled. Exporters that need a real user, now run under a seperate user and group which follow the pattern `<exporter-name>-exporter`, instead of the previous default `nobody` and `nogroup`. Only some exporters are affected by the latter, namely the exporters `dovecot`, `node`, `postfix` and `varnish`. + +- The `ibus-qt` package is not installed by default anymore when [i18n.inputMethod.enabled](options.html#opt-i18n.inputMethod.enabled) is set to `ibus`. If IBus support in Qt 4.x applications is required, add the `ibus-qt` package to your [environment.systemPackages](options.html#opt-environment.systemPackages) manually. + +- The CUPS Printing service now uses socket-based activation by default, only starting when needed. The previous behavior can be restored by setting `services.cups.startWhenNeeded` to `false`. + +- The `services.systemhealth` module has been removed from nixpkgs due to lack of maintainer. + +- The `services.mantisbt` module has been removed from nixpkgs due to lack of maintainer. + +- Squid 3 has been removed and the `squid` derivation now refers to Squid 4. + +- The `services.pdns-recursor.extraConfig` option has been replaced by `services.pdns-recursor.settings`. The new option allows setting extra configuration while being better type-checked and mergeable. + +- No service depends on `keys.target` anymore which is a systemd target that indicates if all [NixOps keys](https://nixos.org/nixops/manual/#idm140737322342384) were successfully uploaded. Instead, `<key-name>-key.service` should be used to define a dependency of a key in a service. The full issue behind the `keys.target` dependency is described at [NixOS/nixpkgs\#67265](https://github.com/NixOS/nixpkgs/issues/67265). + + The following services are affected by this: + + - [`services.dovecot2`](options.html#opt-services.dovecot2.enable) + + - [`services.nsd`](options.html#opt-services.nsd.enable) + + - [`services.softether`](options.html#opt-services.softether.enable) + + - [`services.strongswan`](options.html#opt-services.strongswan.enable) + + - [`services.strongswan-swanctl`](options.html#opt-services.strongswan-swanctl.enable) + + - [`services.httpd`](options.html#opt-services.httpd.enable) + +- The `security.acme.directory` option has been replaced by a read-only `security.acme.certs.<cert>.directory` option for each certificate you define. This will be a subdirectory of `/var/lib/acme`. You can use this read-only option to figure out where the certificates are stored for a specific certificate. For example, the `services.nginx.virtualhosts.<name>.enableACME` option will use this directory option to find the certs for the virtual host. + + `security.acme.preDelay` and `security.acme.activationDelay` options have been removed. To execute a service before certificates are provisioned or renewed add a `RequiredBy=acme-${cert}.service` to any service. + + Furthermore, the acme module will not automatically add a dependency on `lighttpd.service` anymore. If you are using certficates provided by letsencrypt for lighttpd, then you should depend on the certificate service `acme-${cert}.service>` manually. + + For nginx, the dependencies are still automatically managed when `services.nginx.virtualhosts.<name>.enableACME` is enabled just like before. What changed is that nginx now directly depends on the specific certificates that it needs, instead of depending on the catch-all `acme-certificates.target`. This target unit was also removed from the codebase. This will mean nginx will no longer depend on certificates it isn\'t explicitly managing and fixes a bug with certificate renewal ordering racing with nginx restarting which could lead to nginx getting in a broken state as described at [NixOS/nixpkgs\#60180](https://github.com/NixOS/nixpkgs/issues/60180). + +- The old deprecated `emacs` package sets have been dropped. What used to be called `emacsPackagesNg` is now simply called `emacsPackages`. + +- `services.xserver.desktopManager.xterm` is now disabled by default if `stateVersion` is 19.09 or higher. Previously the xterm desktopManager was enabled when xserver was enabled, but it isn\'t useful for all people so it didn\'t make sense to have any desktopManager enabled default. + +- The WeeChat plugin `pkgs.weechatScripts.weechat-xmpp` has been removed as it doesn\'t receive any updates from upstream and depends on outdated Python2-based modules. + +- Old unsupported versions (`logstash5`, `kibana5`, `filebeat5`, `heartbeat5`, `metricbeat5`, `packetbeat5`) of the ELK-stack and Elastic beats have been removed. + +- For NixOS 19.03, both Prometheus 1 and 2 were available to allow for a seamless transition from version 1 to 2 with existing setups. Because Prometheus 1 is no longer developed, it was removed. Prometheus 2 is now configured with `services.prometheus`. + +- Citrix Receiver (`citrix_receiver`) has been dropped in favor of Citrix Workspace (`citrix_workspace`). + +- The `services.gitlab` module has had its literal secret options (`services.gitlab.smtp.password`, `services.gitlab.databasePassword`, `services.gitlab.initialRootPassword`, `services.gitlab.secrets.secret`, `services.gitlab.secrets.db`, `services.gitlab.secrets.otp` and `services.gitlab.secrets.jws`) replaced by file-based versions (`services.gitlab.smtp.passwordFile`, `services.gitlab.databasePasswordFile`, `services.gitlab.initialRootPasswordFile`, `services.gitlab.secrets.secretFile`, `services.gitlab.secrets.dbFile`, `services.gitlab.secrets.otpFile` and `services.gitlab.secrets.jwsFile`). This was done so that secrets aren\'t stored in the world-readable nix store, but means that for each option you\'ll have to create a file with the same exact string, add \"File\" to the end of the option name, and change the definition to a string pointing to the corresponding file; e.g. `services.gitlab.databasePassword = "supersecurepassword"` becomes `services.gitlab.databasePasswordFile = "/path/to/secret_file"` where the file `secret_file` contains the string `supersecurepassword`. + + The state path (`services.gitlab.statePath`) now has the following restriction: no parent directory can be owned by any other user than `root` or the user specified in `services.gitlab.user`; i.e. if `services.gitlab.statePath` is set to `/var/lib/gitlab/state`, `gitlab` and all parent directories must be owned by either `root` or the user specified in `services.gitlab.user`. + +- The `networking.useDHCP` option is unsupported in combination with `networking.useNetworkd` in anticipation of defaulting to it. It has to be set to `false` and enabled per interface with `networking.interfaces.<name>.useDHCP = true;` + +- The Twitter client `corebird` has been dropped as [it is discontinued and does not work against the new Twitter API](https://www.patreon.com/posts/corebirds-future-18921328). Please use the fork `cawbird` instead which has been adapted to the API changes and is still maintained. + +- The `nodejs-11_x` package has been removed as it\'s EOLed by upstream. + +- Because of the systemd upgrade, systemd-timesyncd will no longer work if `system.stateVersion` is not set correctly. When upgrading from NixOS 19.03, please make sure that `system.stateVersion` is set to `"19.03"`, or lower if the installation dates back to an earlier version of NixOS. + +- Due to the short lifetime of non-LTS kernel releases package attributes like `linux_5_1`, `linux_5_2` and `linux_5_3` have been removed to discourage dependence on specific non-LTS kernel versions in stable NixOS releases. Going forward, versioned attributes like `linux_4_9` will exist for LTS versions only. Please use `linux_latest` or `linux_testing` if you depend on non-LTS releases. Keep in mind that `linux_latest` and `linux_testing` will change versions under the hood during the lifetime of a stable release and might include breaking changes. + +- Because of the systemd upgrade, some network interfaces might change their name. For details see [ upstream docs](https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html#History) or [ our ticket](https://github.com/NixOS/nixpkgs/issues/71086). + +## Other Notable Changes {#sec-release-19.09-notable-changes} + +- The `documentation` module gained an option named `documentation.nixos.includeAllModules` which makes the generated configuration.nix 5 manual page include all options from all NixOS modules included in a given `configuration.nix` configuration file. Currently, it is set to `false` by default as enabling it frequently prevents evaluation. But the plan is to eventually have it set to `true` by default. Please set it to `true` now in your `configuration.nix` and fix all the bugs it uncovers. + +- The `vlc` package gained support for Chromecast streaming, enabled by default. TCP port 8010 must be open for it to work, so something like `networking.firewall.allowedTCPPorts = [ 8010 ];` may be required in your configuration. Also consider enabling [ Accelerated Video Playback](https://nixos.wiki/wiki/Accelerated_Video_Playback) for better transcoding performance. + +- The following changes apply if the `stateVersion` is changed to 19.09 or higher. For `stateVersion = "19.03"` or lower the old behavior is preserved. + + - `solr.package` defaults to `pkgs.solr_8`. + +- The `hunspellDicts.fr-any` dictionary now ships with `fr_FR.{aff,dic}` which is linked to `fr-toutesvariantes.{aff,dic}`. + +- The `mysql` service now runs as `mysql` user. Previously, systemd did execute it as root, and mysql dropped privileges itself. This includes `ExecStartPre=` and `ExecStartPost=` phases. To accomplish that, runtime and data directory setup was delegated to RuntimeDirectory and tmpfiles. + +- With the upgrade to systemd version 242 the `systemd-timesyncd` service is no longer using `DynamicUser=yes`. In order for the upgrade to work we rely on an activation script to move the state from the old to the new directory. The older directory (prior `19.09`) was `/var/lib/private/systemd/timesync`. + + As long as the `system.config.stateVersion` is below `19.09` the state folder will migrated to its proper location (`/var/lib/systemd/timesync`), if required. + +- The package `avahi` is now built to look up service definitions from `/etc/avahi/services` instead of its output directory in the nix store. Accordingly the module `avahi` now supports custom service definitions via `services.avahi.extraServiceFiles`, which are then placed in the aforementioned directory. See avahi.service5 for more information on custom service definitions. + +- Since version 0.1.19, `cargo-vendor` honors package includes that are specified in the `Cargo.toml` file of Rust crates. `rustPlatform.buildRustPackage` uses `cargo-vendor` to collect and build dependent crates. Since this change in `cargo-vendor` changes the set of vendored files for most Rust packages, the hash that use used to verify the dependencies, `cargoSha256`, also changes. + + The `cargoSha256` hashes of all in-tree derivations that use `buildRustPackage` have been updated to reflect this change. However, third-party derivations that use `buildRustPackage` may have to be updated as well. + +- The `consul` package was upgraded past version `1.5`, so its deprecated legacy UI is no longer available. + +- The default resample-method for PulseAudio has been changed from the upstream default `speex-float-1` to `speex-float-5`. Be aware that low-powered ARM-based and MIPS-based boards will struggle with this so you\'ll need to set `hardware.pulseaudio.daemon.config.resample-method` back to `speex-float-1`. + +- The `phabricator` package and associated `httpd.extraSubservice`, as well as the `phd` service have been removed from nixpkgs due to lack of maintainer. + +- The `mercurial` `httpd.extraSubservice` has been removed from nixpkgs due to lack of maintainer. + +- The `trac` `httpd.extraSubservice` has been removed from nixpkgs because it was unmaintained. + +- The `foswiki` package and associated `httpd.extraSubservice` have been removed from nixpkgs due to lack of maintainer. + +- The `tomcat-connector` `httpd.extraSubservice` has been removed from nixpkgs. + +- It\'s now possible to change configuration in [services.nextcloud](options.html#opt-services.nextcloud.enable) after the initial deploy since all config parameters are persisted in an additional config file generated by the module. Previously core configuration like database parameters were set using their imperative installer after creating `/var/lib/nextcloud`. + +- There exists now `lib.forEach`, which is like `map`, but with arguments flipped. When mapping function body spans many lines (or has nested `map`s), it is often hard to follow which list is modified. + + Previous solution to this problem was either to use `lib.flip map` idiom or extract that anonymous mapping function to a named one. Both can still be used but `lib.forEach` is preferred over `lib.flip map`. + + The `/etc/sysctl.d/nixos.conf` file containing all the options set via [boot.kernel.sysctl](options.html#opt-boot.kernel.sysctl) was moved to `/etc/sysctl.d/60-nixos.conf`, as sysctl.d5 recommends prefixing all filenames in `/etc/sysctl.d` with a two-digit number and a dash to simplify the ordering of the files. + +- We now install the sysctl snippets shipped with systemd. + + - Loose reverse path filtering + + - Source route filtering + + - `fq_codel` as a packet scheduler (this helps to fight bufferbloat) + + This also configures the kernel to pass core dumps to `systemd-coredump`, and restricts the SysRq key combinations to the sync command only. These sysctl snippets can be found in `/etc/sysctl.d/50-*.conf`, and overridden via [boot.kernel.sysctl](options.html#opt-boot.kernel.sysctl) (which will place the parameters in `/etc/sysctl.d/60-nixos.conf`). + +- Core dumps are now processed by `systemd-coredump` by default. `systemd-coredump` behaviour can still be modified via `systemd.coredump.extraConfig`. To stick to the old behaviour (having the kernel dump to a file called `core` in the working directory), without piping it through `systemd-coredump`, set `systemd.coredump.enable` to `false`. + +- `systemd.packages` option now also supports generators and shutdown scripts. Old `systemd.generator-packages` option has been removed. + +- The `rmilter` package was removed with associated module and options due deprecation by upstream developer. Use `rspamd` in proxy mode instead. + +- systemd cgroup accounting via the [systemd.enableCgroupAccounting](options.html#opt-systemd.enableCgroupAccounting) option is now enabled by default. It now also enables the more recent Block IO and IP accounting features. + +- We no longer enable custom font rendering settings with `fonts.fontconfig.penultimate.enable` by default. The defaults from fontconfig are sufficient. + +- The `crashplan` package and the `crashplan` service have been removed from nixpkgs due to crashplan shutting down the service, while the `crashplansb` package and `crashplan-small-business` service have been removed from nixpkgs due to lack of maintainer. + + The [redis module](options.html#opt-services.redis.enable) was hardcoded to use the `redis` user, `/run/redis` as runtime directory and `/var/lib/redis` as state directory. Note that the NixOS module for Redis now disables kernel support for Transparent Huge Pages (THP), because this features causes major performance problems for Redis, e.g. (https://redis.io/topics/latency). + +- Using `fonts.enableDefaultFonts` adds a default emoji font `noto-fonts-emoji`. + + - `services.xserver.enable` + + - `programs.sway.enable` + + - `programs.way-cooler.enable` + + - `services.xrdp.enable` + +- The `altcoins` categorization of packages has been removed. You now access these packages at the top level, ie. `nix-shell -p dogecoin` instead of `nix-shell -p altcoins.dogecoin`, etc. + +- Ceph has been upgraded to v14.2.1. See the [release notes](https://ceph.com/releases/v14-2-0-nautilus-released/) for details. The mgr dashboard as well as osds backed by loop-devices is no longer explicitly supported by the package and module. Note: There\'s been some issues with python-cherrypy, which is used by the dashboard and prometheus mgr modules (and possibly others), hence 0000-dont-check-cherrypy-version.patch. + +- `pkgs.weechat` is now compiled against `pkgs.python3`. Weechat also recommends [to use Python3 in their docs.](https://weechat.org/scripts/python3/) diff --git a/nixos/doc/manual/release-notes/rl-1909.xml b/nixos/doc/manual/release-notes/rl-1909.xml deleted file mode 100644 index 0dae49c636f..00000000000 --- a/nixos/doc/manual/release-notes/rl-1909.xml +++ /dev/null @@ -1,902 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.09"> - <title>Release 19.09 (“Loris”, 2019/10/09)</title> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.09-highlights"> - <title>Highlights</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - End of support is planned for end of April 2020, handing over to 20.03. - </para> - </listitem> - <listitem> - <para> - Nix has been updated to 2.3; see its - <link xlink:href="https://nixos.org/nix/manual/#ssec-relnotes-2.3">release - notes</link>. - </para> - </listitem> - <listitem> - <para>Core version changes:</para> - <para>systemd: 239 -> 243</para> - <para>gcc: 7 -> 8</para> - <para>glibc: 2.27 (unchanged)</para> - <para>linux: 4.19 LTS (unchanged)</para> - <para>openssl: 1.0 -> 1.1</para> - </listitem> - <listitem> - <para>Desktop version changes:</para> - <para>plasma5: 5.14 -> 5.16</para> - <para>gnome3: 3.30 -> 3.32</para> - </listitem> - <listitem> - <para> - PHP now defaults to PHP 7.3, updated from 7.2. - </para> - </listitem> - <listitem> - <para> - PHP 7.1 is no longer supported due to upstream not supporting this version for the entire lifecycle of the 19.09 release. - </para> - </listitem> - <listitem> - <para> - The binfmt module is now easier to use. Additional systems can - be added through <option>boot.binfmt.emulatedSystems</option>. - For instance, <literal>boot.binfmt.emulatedSystems = [ - "wasm32-wasi" "x86_64-windows" "aarch64-linux" ];</literal> will - set up binfmt interpreters for each of those listed systems. - </para> - </listitem> - <listitem> - <para> - The installer now uses a less privileged <literal>nixos</literal> user whereas before we logged in as root. - To gain root privileges use <literal>sudo -i</literal> without a password. - </para> - </listitem> - <listitem> - <para> - We've updated to Xfce 4.14, which brings a new module <option>services.xserver.desktopManager.xfce4-14</option>. - If you'd like to upgrade, please switch from the <option>services.xserver.desktopManager.xfce</option> module as it - will be deprecated in a future release. They're incompatibilities with the current Xfce module; it doesn't support - <option>thunarPlugins</option> and it isn't recommended to use <option>services.xserver.desktopManager.xfce</option> - and <option>services.xserver.desktopManager.xfce4-14</option> simultaneously or to downgrade from Xfce 4.14 after upgrading. - </para> - </listitem> - <listitem> - <para> - The GNOME 3 desktop manager module sports an interface to enable/disable core services, applications, and optional GNOME packages - like games. - <itemizedlist> - <para>This can be achieved with the following options which the desktop manager default enables, excluding <literal>games</literal>.</para> - <listitem><para><option>services.gnome3.core-os-services.enable</option></para></listitem> - <listitem><para><option>services.gnome3.core-shell.enable</option></para></listitem> - <listitem><para><option>services.gnome3.core-utilities.enable</option></para></listitem> - <listitem><para><option>services.gnome3.games.enable</option></para></listitem> - </itemizedlist> - With these options we hope to give users finer grained control over their systems. Prior to this change you'd either have to manually - disable options or use <option>environment.gnome3.excludePackages</option> which only excluded the optional applications. - <option>environment.gnome3.excludePackages</option> is now unguarded, it can exclude any package installed with <option>environment.systemPackages</option> - in the GNOME 3 module. - </para> - </listitem> - <listitem> - <para> - Orthogonal to the previous changes to the GNOME 3 desktop manager module, we've updated all default services and applications - to match as close as possible to a default reference GNOME 3 experience. - </para> - - <bridgehead>The following changes were enacted in <option>services.gnome3.core-utilities.enable</option></bridgehead> - - <itemizedlist> - <title>Applications removed from defaults:</title> - <listitem><para><literal>accerciser</literal></para></listitem> - <listitem><para><literal>dconf-editor</literal></para></listitem> - <listitem><para><literal>evolution</literal></para></listitem> - <listitem><para><literal>gnome-documents</literal></para></listitem> - <listitem><para><literal>gnome-nettool</literal></para></listitem> - <listitem><para><literal>gnome-power-manager</literal></para></listitem> - <listitem><para><literal>gnome-todo</literal></para></listitem> - <listitem><para><literal>gnome-tweaks</literal></para></listitem> - <listitem><para><literal>gnome-usage</literal></para></listitem> - <listitem><para><literal>gucharmap</literal></para></listitem> - <listitem><para><literal>nautilus-sendto</literal></para></listitem> - <listitem><para><literal>vinagre</literal></para></listitem> - </itemizedlist> - <itemizedlist> - <title>Applications added to defaults:</title> - <listitem><para><literal>cheese</literal></para></listitem> - <listitem><para><literal>geary</literal></para></listitem> - </itemizedlist> - - <bridgehead>The following changes were enacted in <option>services.gnome3.core-shell.enable</option></bridgehead> - - <itemizedlist> - <title>Applications added to defaults:</title> - <listitem><para><literal>gnome-color-manager</literal></para></listitem> - <listitem><para><literal>orca</literal></para></listitem> - </itemizedlist> - <itemizedlist> - <title>Services enabled:</title> - <listitem><para><option>services.avahi.enable</option></para></listitem> - </itemizedlist> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.09-new-services"> - <title>New Services</title> - - <para> - The following new services were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - <literal>./programs/dwm-status.nix</literal> - </para> - </listitem> - <listitem> - <para> - The new <varname>hardware.printers</varname> module allows to declaratively configure CUPS printers - via the <varname>ensurePrinters</varname> and - <varname>ensureDefaultPrinter</varname> options. - <varname>ensurePrinters</varname> will never delete existing printers, - but will make sure that the given printers are configured as declared. - </para> - </listitem> - <listitem> - <para> - There is a new <xref linkend="opt-services.system-config-printer.enable"/> and <xref linkend="opt-programs.system-config-printer.enable"/> module - for the program of the same name. If you previously had <literal>system-config-printer</literal> enabled through some other - means you should migrate to using one of these modules. - </para> - <itemizedlist> - <para>If you're a user of the following desktopManager modules no action is needed:</para> - <listitem> - <para><option>services.xserver.desktopManager.plasma5</option></para> - </listitem> - <listitem> - <para><option>services.xserver.desktopManager.gnome3</option></para> - </listitem> - <listitem> - <para><option>services.xserver.desktopManager.pantheon</option></para> - </listitem> - <listitem> - <para><option>services.xserver.desktopManager.mate</option></para> - <para> - Note Mate uses <literal>programs.system-config-printer</literal> as it doesn't - use it as a service, but its graphical interface directly. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.blueman.enable"/> has been added. - If you previously had blueman installed via <option>environment.systemPackages</option> please - migrate to using the NixOS module, as this would result in an insufficiently configured blueman. - </para> - </listitem> - </itemizedlist> - - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.09-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - Buildbot no longer supports Python 2, as support was dropped upstream in - version 2.0.0. Configurations may need to be modified to make them - compatible with Python 3. - </para> - </listitem> - <listitem> - <para> - PostgreSQL now uses - <filename class="directory">/run/postgresql</filename> as its socket - directory instead of <filename class="directory">/tmp</filename>. So - if you run an application like eg. Nextcloud, where you need to use - the Unix socket path as the database host name, you need to change it - accordingly. - </para> - </listitem> - <listitem> - <para> - PostgreSQL 9.4 is scheduled EOL during the 19.09 life cycle and has been removed. - </para> - </listitem> - <listitem> - <para> - The options <option>services.prometheus.alertmanager.user</option> and - <option>services.prometheus.alertmanager.group</option> have been removed - because the alertmanager service is now using systemd's <link - xlink:href="http://0pointer.net/blog/dynamic-users-with-systemd.html"> - DynamicUser mechanism</link> which obviates these options. - </para> - </listitem> - <listitem> - <para> - The NetworkManager systemd unit was renamed back from network-manager.service to - NetworkManager.service for better compatibility with other applications expecting this name. - The same applies to ModemManager where modem-manager.service is now called ModemManager.service again. - </para> - </listitem> - <listitem> - <para> - The <option>services.nzbget.configFile</option> and <option>services.nzbget.openFirewall</option> - options were removed as they are managed internally by the nzbget. The - <option>services.nzbget.dataDir</option> option hadn't actually been used by - the module for some time and so was removed as cleanup. - </para> - </listitem> - <listitem> - <para> - The <option>services.mysql.pidDir</option> option was removed, as it was only used by the wordpress - apache-httpd service to wait for mysql to have started up. - This can be accomplished by either describing a dependency on mysql.service (preferred) - or waiting for the (hardcoded) <filename>/run/mysqld/mysql.sock</filename> file to appear. - </para> - </listitem> - <listitem> - <para> - The <option>services.emby.enable</option> module has been removed, see - <option>services.jellyfin.enable</option> instead for a free software fork of Emby. - - See the Jellyfin documentation: - <link xlink:href="https://jellyfin.readthedocs.io/en/latest/administrator-docs/migrate-from-emby/"> - Migrating from Emby to Jellyfin - </link> - </para> - </listitem> - <listitem> - <para> - IPv6 Privacy Extensions are now enabled by default for undeclared - interfaces. The previous behaviour was quite misleading — even though - the default value for - <option>networking.interfaces.*.preferTempAddress</option> was - <literal>true</literal>, undeclared interfaces would not prefer temporary - addresses. Now, interfaces not mentioned in the config will prefer - temporary addresses. EUI64 addresses can still be set as preferred by - explicitly setting the option to <literal>false</literal> for the - interface in question. - </para> - </listitem> - <listitem> - <para> - Since Bittorrent Sync was superseded by Resilio Sync in 2016, the - <literal>bittorrentSync</literal>, <literal>bittorrentSync14</literal>, - and <literal>bittorrentSync16</literal> packages have been removed in - favor of <literal>resilio-sync</literal>. - </para> - <para> - The corresponding module, <option>services.btsync</option> has been - replaced by the <option>services.resilio</option> module. - </para> - </listitem> - <listitem> - <para> - The httpd service no longer attempts to start the postgresql service. If you have come to depend - on this behaviour then you can preserve the behavior with the following configuration: - <literal>systemd.services.httpd.after = [ "postgresql.service" ];</literal> - </para> - <para> - The option <option>services.httpd.extraSubservices</option> has been - marked as deprecated. You may still use this feature, but it will be - removed in a future release of NixOS. You are encouraged to convert any - httpd subservices you may have written to a full NixOS module. - </para> - <para> - Most of the httpd subservices packaged with NixOS have been replaced with - full NixOS modules including LimeSurvey, WordPress, and Zabbix. These - modules can be enabled using the <option>services.limesurvey.enable</option>, - <option>services.mediawiki.enable</option>, <option>services.wordpress.enable</option>, - and <option>services.zabbixWeb.enable</option> options. - </para> - </listitem> - <listitem> - <para> - The option <option>systemd.network.networks.<name>.routes.*.routeConfig.GatewayOnlink</option> - was renamed to <option>systemd.network.networks.<name>.routes.*.routeConfig.GatewayOnLink</option> - (capital <literal>L</literal>). This follows - <link xlink:href="https://github.com/systemd/systemd/commit/9cb8c5593443d24c19e40bfd4fc06d672f8c554c"> - upstreams renaming - </link> of the setting. - </para> - </listitem> - <listitem> - <para> - As of this release the NixOps feature <literal>autoLuks</literal> is deprecated. It no longer works - with our systemd version without manual intervention. - </para> - <para> - Whenever the usage of the module is detected the evaluation will fail with a message - explaining why and how to deal with the situation. - </para> - <para> - A new knob named <literal>nixops.enableDeprecatedAutoLuks</literal> - has been introduced to disable the eval failure and to acknowledge the notice was received and read. - If you plan on using the feature please note that it might break with subsequent updates. - </para> - <para> - Make sure you set the <literal>_netdev</literal> option for each of the file systems referring to block - devices provided by the autoLuks module. Not doing this might render the system in a - state where it doesn't boot anymore. - </para> - <para> - If you are actively using the <literal>autoLuks</literal> module please let us know in - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/62211">issue #62211</link>. - </para> - </listitem> - <listitem> - <para> - The setopt declarations will be evaluated at the end of <literal>/etc/zshrc</literal>, so any code in <xref linkend="opt-programs.zsh.interactiveShellInit" />, - <xref linkend="opt-programs.zsh.loginShellInit" /> and <xref linkend="opt-programs.zsh.promptInit" /> may break if it relies on those options being set. - </para> - </listitem> - <listitem> - <para> - The <literal>prometheus-nginx-exporter</literal> package now uses the offical exporter provided by NGINX Inc. - Its metrics are differently structured and are incompatible to the old ones. For information about the metrics, - have a look at the <link xlink:href="https://github.com/nginxinc/nginx-prometheus-exporter">official repo</link>. - </para> - </listitem> - <listitem> - <para> - The <literal>shibboleth-sp</literal> package has been updated to version 3. - It is largely backward compatible, for further information refer to the - <link xlink:href="https://wiki.shibboleth.net/confluence/display/SP3/ReleaseNotes">release notes</link> - and <link xlink:href="https://wiki.shibboleth.net/confluence/display/SP3/UpgradingFromV2">upgrade guide</link>. - </para> - <para> - Nodejs 8 is scheduled EOL under the lifetime of 19.09 and has been dropped. - </para> - </listitem> - <listitem> - <para> - By default, prometheus exporters are now run with <literal>DynamicUser</literal> enabled. - Exporters that need a real user, now run under a seperate user and group which follow the pattern <literal><exporter-name>-exporter</literal>, instead of the previous default <literal>nobody</literal> and <literal>nogroup</literal>. - Only some exporters are affected by the latter, namely the exporters <literal>dovecot</literal>, <literal>node</literal>, <literal>postfix</literal> and <literal>varnish</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>ibus-qt</literal> package is not installed by default anymore when <xref linkend="opt-i18n.inputMethod.enabled" /> is set to <literal>ibus</literal>. - If IBus support in Qt 4.x applications is required, add the <literal>ibus-qt</literal> package to your <xref linkend="opt-environment.systemPackages" /> manually. - </para> - </listitem> - <listitem> - <para> - The CUPS Printing service now uses socket-based activation by - default, only starting when needed. The previous behavior can - be restored by setting - <option>services.cups.startWhenNeeded</option> to - <literal>false</literal>. - </para> - </listitem> - <listitem> - <para> - The <option>services.systemhealth</option> module has been removed from nixpkgs due to lack of maintainer. - </para> - </listitem> - <listitem> - <para> - The <option>services.mantisbt</option> module has been removed from nixpkgs due to lack of maintainer. - </para> - </listitem> - <listitem> - <para> - Squid 3 has been removed and the <option>squid</option> derivation now refers to Squid 4. - </para> - </listitem> - <listitem> - <para> - The <option>services.pdns-recursor.extraConfig</option> option has been replaced by - <option>services.pdns-recursor.settings</option>. The new option allows setting extra - configuration while being better type-checked and mergeable. - </para> - </listitem> - <listitem> - <para> - No service depends on <literal>keys.target</literal> anymore which is a systemd - target that indicates if all <link xlink:href="https://nixos.org/nixops/manual/#idm140737322342384">NixOps keys</link> were successfully uploaded. - Instead, <literal><key-name>-key.service</literal> should be used to define - a dependency of a key in a service. The full issue behind the <literal>keys.target</literal> - dependency is described at <link xlink:href="https://github.com/NixOS/nixpkgs/issues/67265">NixOS/nixpkgs#67265</link>. - </para> - <para> - The following services are affected by this: - <itemizedlist> - <listitem><para><link linkend="opt-services.dovecot2.enable"><literal>services.dovecot2</literal></link></para></listitem> - <listitem><para><link linkend="opt-services.nsd.enable"><literal>services.nsd</literal></link></para></listitem> - <listitem><para><link linkend="opt-services.softether.enable"><literal>services.softether</literal></link></para></listitem> - <listitem><para><link linkend="opt-services.strongswan.enable"><literal>services.strongswan</literal></link></para></listitem> - <listitem><para><link linkend="opt-services.strongswan-swanctl.enable"><literal>services.strongswan-swanctl</literal></link></para></listitem> - <listitem><para><link linkend="opt-services.httpd.enable"><literal>services.httpd</literal></link></para></listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - The <option>security.acme.directory</option> option has been replaced by a read-only <option>security.acme.certs.<cert>.directory</option> option for each certificate you define. This will be - a subdirectory of <literal>/var/lib/acme</literal>. You can use this read-only option to figure out where the certificates are stored for a specific certificate. For example, - the <option>services.nginx.virtualhosts.<name>.enableACME</option> option will use this directory option to find the certs for the virtual host. - </para> - <para> - <option>security.acme.preDelay</option> and <option>security.acme.activationDelay</option> options have been removed. To execute a service before certificates - are provisioned or renewed add a <literal>RequiredBy=acme-${cert}.service</literal> to any service. - </para> - <para> - Furthermore, the acme module will not automatically add a dependency on <literal>lighttpd.service</literal> anymore. If you are using certficates provided by letsencrypt - for lighttpd, then you should depend on the certificate service <literal>acme-${cert}.service></literal> manually. - </para> - <para> - For nginx, the dependencies are still automatically managed when <option>services.nginx.virtualhosts.<name>.enableACME</option> is enabled just like before. What changed is that nginx now directly depends on the specific certificates that it needs, - instead of depending on the catch-all <literal>acme-certificates.target</literal>. This target unit was also removed from the codebase. - This will mean nginx will no longer depend on certificates it isn't explicitly managing and fixes a bug with certificate renewal - ordering racing with nginx restarting which could lead to nginx getting in a broken state as described at - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/60180">NixOS/nixpkgs#60180</link>. - </para> - </listitem> - <listitem> - <para> - The old deprecated <literal>emacs</literal> package sets have been dropped. - What used to be called <literal>emacsPackagesNg</literal> is now simply called <literal>emacsPackages</literal>. - </para> - </listitem> - <listitem> - <para> - <option>services.xserver.desktopManager.xterm</option> is now disabled by default if <literal>stateVersion</literal> is 19.09 or higher. - Previously the xterm desktopManager was enabled when xserver was enabled, but it isn't useful for all people so it didn't make sense to - have any desktopManager enabled default. - </para> - </listitem> - <listitem> - <para> - The WeeChat plugin <literal>pkgs.weechatScripts.weechat-xmpp</literal> has been removed as it doesn't receive - any updates from upstream and depends on outdated Python2-based modules. - </para> - </listitem> - <listitem> - <para> - Old unsupported versions (<literal>logstash5</literal>, - <literal>kibana5</literal>, - <literal>filebeat5</literal>, - <literal>heartbeat5</literal>, - <literal>metricbeat5</literal>, - <literal>packetbeat5</literal>) of the ELK-stack and Elastic beats have been removed. - </para> - </listitem> - <listitem> - <para> - For NixOS 19.03, both Prometheus 1 and 2 were available to allow for - a seamless transition from version 1 to 2 with existing setups. - Because Prometheus 1 is no longer developed, it was removed. - Prometheus 2 is now configured with <literal>services.prometheus</literal>. - </para> - </listitem> - <listitem> - <para> - Citrix Receiver (<literal>citrix_receiver</literal>) has been dropped in favor of Citrix Workspace - (<literal>citrix_workspace</literal>). - </para> - </listitem> - <listitem> - <para> - The <literal>services.gitlab</literal> module has had its literal secret options (<option>services.gitlab.smtp.password</option>, - <option>services.gitlab.databasePassword</option>, - <option>services.gitlab.initialRootPassword</option>, - <option>services.gitlab.secrets.secret</option>, - <option>services.gitlab.secrets.db</option>, - <option>services.gitlab.secrets.otp</option> and - <option>services.gitlab.secrets.jws</option>) replaced by file-based versions (<option>services.gitlab.smtp.passwordFile</option>, - <option>services.gitlab.databasePasswordFile</option>, - <option>services.gitlab.initialRootPasswordFile</option>, - <option>services.gitlab.secrets.secretFile</option>, - <option>services.gitlab.secrets.dbFile</option>, - <option>services.gitlab.secrets.otpFile</option> and - <option>services.gitlab.secrets.jwsFile</option>). This was done so that secrets aren't stored - in the world-readable nix store, but means that for each option you'll have to create a file with - the same exact string, add "File" to the end of the option name, and change the definition to a - string pointing to the corresponding file; e.g. <literal>services.gitlab.databasePassword = "supersecurepassword"</literal> - becomes <literal>services.gitlab.databasePasswordFile = "/path/to/secret_file"</literal> where the - file <literal>secret_file</literal> contains the string <literal>supersecurepassword</literal>. - </para> - <para> - The state path (<option>services.gitlab.statePath</option>) now has the following restriction: - no parent directory can be owned by any other user than <literal>root</literal> or the user - specified in <option>services.gitlab.user</option>; i.e. if <option>services.gitlab.statePath</option> - is set to <literal>/var/lib/gitlab/state</literal>, <literal>gitlab</literal> and all parent directories - must be owned by either <literal>root</literal> or the user specified in <option>services.gitlab.user</option>. - </para> - </listitem> - <listitem> - <para> - The <option>networking.useDHCP</option> option is unsupported in combination with - <option>networking.useNetworkd</option> in anticipation of defaulting to it. - It has to be set to <literal>false</literal> and enabled per - interface with <option>networking.interfaces.<name>.useDHCP = true;</option> - </para> - </listitem> - <listitem> - <para> - The Twitter client <literal>corebird</literal> has been dropped as <link xlink:href="https://www.patreon.com/posts/corebirds-future-18921328">it is discontinued and does not work against the new Twitter API</link>. - Please use the fork <literal>cawbird</literal> instead which has been adapted to the API changes and is still maintained. - </para> - </listitem> - <listitem> - <para> - The <literal>nodejs-11_x</literal> package has been removed as it's EOLed by upstream. - </para> - </listitem> - <listitem> - <para> - Because of the systemd upgrade, - <application>systemd-timesyncd</application> will no longer work if - <option>system.stateVersion</option> is not set correctly. When - upgrading from NixOS 19.03, please make sure that - <option>system.stateVersion</option> is set to - <literal>"19.03"</literal>, or lower if the installation dates back to an - earlier version of NixOS. - </para> - </listitem> - <listitem> - <para> - Due to the short lifetime of non-LTS kernel releases package attributes like <literal>linux_5_1</literal>, - <literal>linux_5_2</literal> and <literal>linux_5_3</literal> have been removed to discourage dependence - on specific non-LTS kernel versions in stable NixOS releases. - - Going forward, versioned attributes like <literal>linux_4_9</literal> will exist for LTS versions only. - Please use <literal>linux_latest</literal> or <literal>linux_testing</literal> if you depend on non-LTS - releases. Keep in mind that <literal>linux_latest</literal> and <literal>linux_testing</literal> will - change versions under the hood during the lifetime of a stable release and might include breaking changes. - </para> - </listitem> - <listitem> - <para> - Because of the systemd upgrade, - some network interfaces might change their name. For details see - <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html#History"> - upstream docs</link> or <link xlink:href="https://github.com/NixOS/nixpkgs/issues/71086"> - our ticket</link>. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-19.09-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para> - The <option>documentation</option> module gained an option named - <option>documentation.nixos.includeAllModules</option> which makes the - generated <citerefentry> - <refentrytitle>configuration.nix</refentrytitle> - <manvolnum>5</manvolnum></citerefentry> manual page include all options - from all NixOS modules included in a given - <literal>configuration.nix</literal> configuration file. Currently, it is - set to <literal>false</literal> by default as enabling it frequently - prevents evaluation. But the plan is to eventually have it set to - <literal>true</literal> by default. Please set it to - <literal>true</literal> now in your <literal>configuration.nix</literal> - and fix all the bugs it uncovers. - </para> - </listitem> - <listitem> - <para> - The <literal>vlc</literal> package gained support for Chromecast - streaming, enabled by default. TCP port 8010 must be open for it to work, - so something like <literal>networking.firewall.allowedTCPPorts = [ 8010 - ];</literal> may be required in your configuration. Also consider enabling - <link xlink:href="https://nixos.wiki/wiki/Accelerated_Video_Playback"> - Accelerated Video Playback</link> for better transcoding performance. - </para> - </listitem> - <listitem> - <para> - The following changes apply if the <literal>stateVersion</literal> is - changed to 19.09 or higher. For <literal>stateVersion = "19.03"</literal> - or lower the old behavior is preserved. - </para> - <itemizedlist> - <listitem> - <para> - <literal>solr.package</literal> defaults to - <literal>pkgs.solr_8</literal>. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - The <literal>hunspellDicts.fr-any</literal> dictionary now ships with <literal>fr_FR.{aff,dic}</literal> - which is linked to <literal>fr-toutesvariantes.{aff,dic}</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>mysql</literal> service now runs as <literal>mysql</literal> - user. Previously, systemd did execute it as root, and mysql dropped privileges - itself. - This includes <literal>ExecStartPre=</literal> and - <literal>ExecStartPost=</literal> phases. - To accomplish that, runtime and data directory setup was delegated to - RuntimeDirectory and tmpfiles. - </para> - </listitem> - <listitem> - <para> - With the upgrade to systemd version 242 the <literal>systemd-timesyncd</literal> - service is no longer using <literal>DynamicUser=yes</literal>. In order for the - upgrade to work we rely on an activation script to move the state from the old - to the new directory. The older directory (prior <literal>19.09</literal>) was - <literal>/var/lib/private/systemd/timesync</literal>. - </para> - <para> - As long as the <literal>system.config.stateVersion</literal> is below - <literal>19.09</literal> the state folder will migrated to its proper location - (<literal>/var/lib/systemd/timesync</literal>), if required. - </para> - </listitem> - <listitem> - <para> - The package <literal>avahi</literal> is now built to look up service - definitions from <literal>/etc/avahi/services</literal> instead of its - output directory in the nix store. Accordingly the module - <option>avahi</option> now supports custom service definitions via - <option>services.avahi.extraServiceFiles</option>, which are then placed - in the aforementioned directory. See <citerefentry> - <refentrytitle>avahi.service</refentrytitle><manvolnum>5</manvolnum> - </citerefentry> for more information on custom service definitions. - </para> - </listitem> - <listitem> - <para> - Since version 0.1.19, <literal>cargo-vendor</literal> honors package - includes that are specified in the <filename>Cargo.toml</filename> - file of Rust crates. <literal>rustPlatform.buildRustPackage</literal> uses - <literal>cargo-vendor</literal> to collect and build dependent crates. - Since this change in <literal>cargo-vendor</literal> changes the set of - vendored files for most Rust packages, the hash that use used to verify - the dependencies, <literal>cargoSha256</literal>, also changes. - </para> - <para> - The <literal>cargoSha256</literal> hashes of all in-tree derivations that - use <literal>buildRustPackage</literal> have been updated to reflect this - change. However, third-party derivations that use - <literal>buildRustPackage</literal> may have to be updated as well. - </para> - </listitem> - <listitem> - <para> - The <literal>consul</literal> package was upgraded past version <literal>1.5</literal>, - so its deprecated legacy UI is no longer available. - </para> - </listitem> - <listitem> - <para> - The default resample-method for PulseAudio has been changed from the upstream default <literal>speex-float-1</literal> - to <literal>speex-float-5</literal>. Be aware that low-powered ARM-based and MIPS-based boards will struggle with this - so you'll need to set <option>hardware.pulseaudio.daemon.config.resample-method</option> back to <literal>speex-float-1</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>phabricator</literal> package and associated <literal>httpd.extraSubservice</literal>, as well as the - <literal>phd</literal> service have been removed from nixpkgs due to lack of maintainer. - </para> - </listitem> - <listitem> - <para> - The <literal>mercurial</literal> <literal>httpd.extraSubservice</literal> has been removed from nixpkgs due to lack of maintainer. - </para> - </listitem> - <listitem> - <para> - The <literal>trac</literal> <literal>httpd.extraSubservice</literal> has been removed from nixpkgs because it was unmaintained. - </para> - </listitem> - <listitem> - <para> - The <literal>foswiki</literal> package and associated <literal>httpd.extraSubservice</literal> have been removed - from nixpkgs due to lack of maintainer. - </para> - </listitem> - <listitem> - <para> - The <literal>tomcat-connector</literal> <literal>httpd.extraSubservice</literal> has been removed from nixpkgs. - </para> - </listitem> - <listitem> - <para> - It's now possible to change configuration in - <link linkend="opt-services.nextcloud.enable">services.nextcloud</link> after the initial deploy - since all config parameters are persisted in an additional config file generated by the module. - Previously core configuration like database parameters were set using their imperative - installer after creating <literal>/var/lib/nextcloud</literal>. - </para> - </listitem> - <listitem> - <para> - There exists now <literal>lib.forEach</literal>, which is like <literal>map</literal>, but with - arguments flipped. When mapping function body spans many lines (or has nested - <literal>map</literal>s), it is often hard to follow which list is modified. - </para> - <para> - Previous solution to this problem was either to use <literal>lib.flip map</literal> - idiom or extract that anonymous mapping function to a named one. Both can still be used - but <literal>lib.forEach</literal> is preferred over <literal>lib.flip map</literal>. - </para> - <para> - The <literal>/etc/sysctl.d/nixos.conf</literal> file containing all the options set via - <link linkend="opt-boot.kernel.sysctl">boot.kernel.sysctl</link> was moved to - <literal>/etc/sysctl.d/60-nixos.conf</literal>, as - <citerefentry><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - recommends prefixing all filenames in <literal>/etc/sysctl.d</literal> with a - two-digit number and a dash to simplify the ordering of the files. - </para> - </listitem> - <listitem> - <para> - We now install the sysctl snippets shipped with systemd. - <itemizedlist> - <para>This enables:</para> - <listitem> - <para>Loose reverse path filtering</para> - </listitem> - <listitem> - <para>Source route filtering</para> - </listitem> - <listitem> - <para> - <literal>fq_codel</literal> as a packet scheduler (this helps to fight bufferbloat) - </para> - </listitem> - </itemizedlist> - This also configures the kernel to pass core dumps to <literal>systemd-coredump</literal>, - and restricts the SysRq key combinations to the sync command only. - These sysctl snippets can be found in <literal>/etc/sysctl.d/50-*.conf</literal>, - and overridden via <link linkend="opt-boot.kernel.sysctl">boot.kernel.sysctl</link> - (which will place the parameters in <literal>/etc/sysctl.d/60-nixos.conf</literal>). - </para> - </listitem> - <listitem> - <para> - Core dumps are now processed by <literal>systemd-coredump</literal> - by default. <literal>systemd-coredump</literal> behaviour can - still be modified via - <option>systemd.coredump.extraConfig</option>. To stick to the - old behaviour (having the kernel dump to a file called - <literal>core</literal> in the working directory), without piping - it through <literal>systemd-coredump</literal>, set - <option>systemd.coredump.enable</option> to - <literal>false</literal>. - </para> - </listitem> - <listitem> - <para> - <literal>systemd.packages</literal> option now also supports generators and - shutdown scripts. Old <literal>systemd.generator-packages</literal> option has - been removed. - </para> - </listitem> - <listitem> - <para> - The <literal>rmilter</literal> package was removed with associated module and options due deprecation by upstream developer. - Use <literal>rspamd</literal> in proxy mode instead. - </para> - </listitem> - <listitem> - <para> - systemd cgroup accounting via the - <link linkend="opt-systemd.enableCgroupAccounting">systemd.enableCgroupAccounting</link> - option is now enabled by default. It now also enables the more recent Block IO and IP accounting - features. - </para> - </listitem> - <listitem> - <para> - We no longer enable custom font rendering settings with <option>fonts.fontconfig.penultimate.enable</option> by default. - The defaults from fontconfig are sufficient. - </para> - </listitem> - <listitem> - <para> - The <literal>crashplan</literal> package and the - <literal>crashplan</literal> service have been removed from nixpkgs due to - crashplan shutting down the service, while the <literal>crashplansb</literal> - package and <literal>crashplan-small-business</literal> service have been - removed from nixpkgs due to lack of maintainer. - </para> - <para> - The <link linkend="opt-services.redis.enable">redis module</link> was hardcoded to use the <literal>redis</literal> user, - <filename class="directory">/run/redis</filename> as runtime directory and - <filename class="directory">/var/lib/redis</filename> as state directory. - Note that the NixOS module for Redis now disables kernel support for Transparent Huge Pages (THP), - because this features causes major performance problems for Redis, - e.g. (https://redis.io/topics/latency). - </para> - </listitem> - <listitem> - <para> - Using <option>fonts.enableDefaultFonts</option> adds a default emoji font <literal>noto-fonts-emoji</literal>. - <itemizedlist> - <para>Users of the following options will have this enabled by default:</para> - <listitem> - <para><option>services.xserver.enable</option></para> - </listitem> - <listitem> - <para><option>programs.sway.enable</option></para> - </listitem> - <listitem> - <para><option>programs.way-cooler.enable</option></para> - </listitem> - <listitem> - <para><option>services.xrdp.enable</option></para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - The <literal>altcoins</literal> categorization of packages has - been removed. You now access these packages at the top level, - ie. <literal>nix-shell -p dogecoin</literal> instead of - <literal>nix-shell -p altcoins.dogecoin</literal>, etc. - </para> - </listitem> - <listitem> - <para> - Ceph has been upgraded to v14.2.1. - See the <link xlink:href="https://ceph.com/releases/v14-2-0-nautilus-released/">release notes</link> for details. - The mgr dashboard as well as osds backed by loop-devices is no longer explicitly supported by the package and module. - Note: There's been some issues with python-cherrypy, which is used by the dashboard - and prometheus mgr modules (and possibly others), hence 0000-dont-check-cherrypy-version.patch. - </para> - </listitem> - <listitem> - <para> - <literal>pkgs.weechat</literal> is now compiled against <literal>pkgs.python3</literal>. - Weechat also recommends <link xlink:href="https://weechat.org/scripts/python3/">to use Python3 - in their docs.</link> - </para> - </listitem> - </itemizedlist> - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-2003.section.md b/nixos/doc/manual/release-notes/rl-2003.section.md new file mode 100644 index 00000000000..b92c7f6634c --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-2003.section.md @@ -0,0 +1,507 @@ +# Release 20.03 ("Markhor", 2020.04/20) {#sec-release-20.03} + +## Highlights {#sec-release-20.03-highlights} + +In addition to numerous new and upgraded packages, this release has the following highlights: + +- Support is planned until the end of October 2020, handing over to 20.09. + +- Core version changes: + + gcc: 8.3.0 -\> 9.2.0 + + glibc: 2.27 -\> 2.30 + + linux: 4.19 -\> 5.4 + + mesa: 19.1.5 -\> 19.3.3 + + openssl: 1.0.2u -\> 1.1.1d + +- Desktop version changes: + + plasma5: 5.16.5 -\> 5.17.5 + + kdeApplications: 19.08.2 -\> 19.12.3 + + gnome3: 3.32 -\> 3.34 + + pantheon: 5.0 -\> 5.1.3 + +- Linux kernel is updated to branch 5.4 by default (from 4.19). + +- Grub is updated to 2.04, adding support for booting from F2FS filesystems and Btrfs volumes using zstd compression. Note that some users have been unable to boot after upgrading to 2.04 - for more information, please see [this discussion](https://github.com/NixOS/nixpkgs/issues/61718#issuecomment-617618503). + +- Postgresql for NixOS service now defaults to v11. + +- The graphical installer image starts the graphical session automatically. Before you\'d be greeted by a tty and asked to enter `systemctl start display-manager`. It is now possible to disable the display-manager from running by selecting the `Disable display-manager` quirk in the boot menu. + +- GNOME 3 has been upgraded to 3.34. Please take a look at their [Release Notes](https://help.gnome.org/misc/release-notes/3.34) for details. + +- If you enable the Pantheon Desktop Manager via [services.xserver.desktopManager.pantheon.enable](options.html#opt-services.xserver.desktopManager.pantheon.enable), we now default to also use [ Pantheon\'s newly designed greeter ](https://blog.elementary.io/say-hello-to-the-new-greeter/). Contrary to NixOS\'s usual update policy, Pantheon will receive updates during the cycle of NixOS 20.03 when backwards compatible. + +- By default zfs pools will now be trimmed on a weekly basis. Trimming is only done on supported devices (i.e. NVME or SSDs) and should improve throughput and lifetime of these devices. It is controlled by the `services.zfs.trim.enable` varname. The zfs scrub service (`services.zfs.autoScrub.enable`) and the zfs autosnapshot service (`services.zfs.autoSnapshot.enable`) are now only enabled if zfs is set in `config.boot.initrd.supportedFilesystems` or `config.boot.supportedFilesystems`. These lists will automatically contain zfs as soon as any zfs mountpoint is configured in `fileSystems`. + +- `nixos-option` has been rewritten in C++, speeding it up, improving correctness, and adding a `-r` option which prints all options and their values recursively. + +- `services.xserver.desktopManager.default` and `services.xserver.windowManager.default` options were replaced by a single [services.xserver.displayManager.defaultSession](options.html#opt-services.xserver.displayManager.defaultSession) option to improve support for upstream session files. If you used something like: + + ```nix + { + services.xserver.desktopManager.default = "xfce"; + services.xserver.windowManager.default = "icewm"; + } + ``` + + you should change it to: + + ```nix + { + services.xserver.displayManager.defaultSession = "xfce+icewm"; + } + ``` + +- The testing driver implementation in NixOS is now in Python `make-test-python.nix`. This was done by Jacek Galowicz ([\@tfc](https://github.com/tfc)), and with the collaboration of Julian Stecklina ([\@blitz](https://github.com/blitz)) and Jana Traue ([\@jtraue](https://github.com/jtraue)). All documentation has been updated to use this testing driver, and a vast majority of the 286 tests in NixOS were ported to python driver. In 20.09 the Perl driver implementation, `make-test.nix`, is slated for removal. This should give users of the NixOS integration framework a transitory period to rewrite their tests to use the Python implementation. Users of the Perl driver will see this warning everytime they use it: + + ```ShellSession + $ warning: Perl VM tests are deprecated and will be removed for 20.09. + Please update your tests to use the python test driver. + See https://github.com/NixOS/nixpkgs/pull/71684 for details. + ``` + + API compatibility is planned to be kept for at least the next release with the perl driver. + +## New Services {#sec-release-20.03-new-services} + +The following new services were added since the last release: + +- The kubernetes kube-proxy now supports a new hostname configuration `services.kubernetes.proxy.hostname` which has to be set if the hostname of the node should be non default. + +- UPower\'s configuration is now managed by NixOS and can be customized via `services.upower`. + +- To use Geary you should enable [programs.geary.enable](options.html#opt-programs.geary.enable) instead of just adding it to [environment.systemPackages](options.html#opt-environment.systemPackages). It was created so Geary could function properly outside of GNOME. + +- `./config/console.nix` + +- `./hardware/brillo.nix` + +- `./hardware/tuxedo-keyboard.nix` + +- `./programs/bandwhich.nix` + +- `./programs/bash-my-aws.nix` + +- `./programs/liboping.nix` + +- `./programs/traceroute.nix` + +- `./services/backup/sanoid.nix` + +- `./services/backup/syncoid.nix` + +- `./services/backup/zfs-replication.nix` + +- `./services/continuous-integration/buildkite-agents.nix` + +- `./services/databases/victoriametrics.nix` + +- `./services/desktops/gnome3/gnome-initial-setup.nix` + +- `./services/desktops/neard.nix` + +- `./services/games/openarena.nix` + +- `./services/hardware/fancontrol.nix` + +- `./services/mail/sympa.nix` + +- `./services/misc/freeswitch.nix` + +- `./services/misc/mame.nix` + +- `./services/monitoring/do-agent.nix` + +- `./services/monitoring/prometheus/xmpp-alerts.nix` + +- `./services/network-filesystems/orangefs/server.nix` + +- `./services/network-filesystems/orangefs/client.nix` + +- `./services/networking/3proxy.nix` + +- `./services/networking/corerad.nix` + +- `./services/networking/go-shadowsocks2.nix` + +- `./services/networking/ntp/openntpd.nix` + +- `./services/networking/shorewall.nix` + +- `./services/networking/shorewall6.nix` + +- `./services/networking/spacecookie.nix` + +- `./services/networking/trickster.nix` + +- `./services/networking/v2ray.nix` + +- `./services/networking/xandikos.nix` + +- `./services/networking/yggdrasil.nix` + +- `./services/web-apps/dokuwiki.nix` + +- `./services/web-apps/gotify-server.nix` + +- `./services/web-apps/grocy.nix` + +- `./services/web-apps/ihatemoney` + +- `./services/web-apps/moinmoin.nix` + +- `./services/web-apps/trac.nix` + +- `./services/web-apps/trilium.nix` + +- `./services/web-apps/shiori.nix` + +- `./services/web-servers/ttyd.nix` + +- `./services/x11/picom.nix` + +- `./services/x11/hardware/digimend.nix` + +- `./services/x11/imwheel.nix` + +- `./virtualisation/cri-o.nix` + +## Backward Incompatibilities {#sec-release-20.03-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- The dhcpcd package [ does not request IPv4 addresses for tap and bridge interfaces anymore by default](https://roy.marples.name/archives/dhcpcd-discuss/0002621.html). In order to still get an address on a bridge interface, one has to disable `networking.useDHCP` and explicitly enable `networking.interfaces.<name>.useDHCP` on every interface, that should get an address via DHCP. This way, dhcpcd is configured in an explicit way about which interface to run on. + +- GnuPG is now built without support for a graphical passphrase entry by default. Please enable the `gpg-agent` user service via the NixOS option `programs.gnupg.agent.enable`. Note that upstream recommends using `gpg-agent` and will spawn a `gpg-agent` on the first invocation of GnuPG anyway. + +- The `dynamicHosts` option has been removed from the [NetworkManager](options.html#opt-networking.networkmanager.enable) module. Allowing (multiple) regular users to override host entries affecting the whole system opens up a huge attack vector. There seem to be very rare cases where this might be useful. Consider setting system-wide host entries using [networking.hosts](options.html#opt-networking.hosts), provide them via the DNS server in your network, or use [environment.etc](options.html#opt-environment.etc) to add a file into `/etc/NetworkManager/dnsmasq.d` reconfiguring `hostsdir`. + +- The `99-main.network` file was removed. Matching all network interfaces caused many breakages, see [\#18962](https://github.com/NixOS/nixpkgs/pull/18962) and [\#71106](https://github.com/NixOS/nixpkgs/pull/71106). + + We already don\'t support the global [networking.useDHCP](options.html#opt-networking.useDHCP), [networking.defaultGateway](options.html#opt-networking.defaultGateway) and [networking.defaultGateway6](options.html#opt-networking.defaultGateway6) options if [networking.useNetworkd](options.html#opt-networking.useNetworkd) is enabled, but direct users to configure the per-device [networking.interfaces.\<name\>....](options.html#opt-networking.interfaces) options. + +- The stdenv now runs all bash with `set -u`, to catch the use of undefined variables. Before, it itself used `set -u` but was careful to unset it so other packages\' code ran as before. Now, all bash code is held to the same high standard, and the rather complex stateful manipulation of the options can be discarded. + +- The SLIM Display Manager has been removed, as it has been unmaintained since 2013. Consider migrating to a different display manager such as LightDM (current default in NixOS), SDDM, GDM, or using the startx module which uses Xinitrc. + +- The Way Cooler wayland compositor has been removed, as the project has been officially canceled. There are no more `way-cooler` attribute and `programs.way-cooler` options. + +- The BEAM package set has been deleted. You will only find there the different interpreters. You should now use the different build tools coming with the languages with sandbox mode disabled. + +- There is now only one Xfce package-set and module. This means that attributes `xfce4-14` and `xfceUnstable` all now point to the latest Xfce 4.14 packages. And in the future NixOS releases will be the latest released version of Xfce available at the time of the release\'s development (if viable). + +- The [phpfpm](options.html#opt-services.phpfpm.pools) module now sets `PrivateTmp=true` in its systemd units for better process isolation. If you rely on `/tmp` being shared with other services, explicitly override this by setting `serviceConfig.PrivateTmp` to `false` for each phpfpm unit. + +- KDE's old multimedia framework Phonon no longer supports Qt 4. For that reason, Plasma desktop also does not have `enableQt4Support` option any more. + +- The BeeGFS module has been removed. + +- The osquery module has been removed. + +- Going forward, `~/bin` in the users home directory will no longer be in `PATH` by default. If you depend on this you should set the option `environment.homeBinInPath` to `true`. The aforementioned option was added this release. + +- The `buildRustCrate` infrastructure now produces `lib` outputs in addition to the `out` output. This has led to drastically reduced closure sizes for some rust crates since development dependencies are now in the `lib` output. + +- Pango was upgraded to 1.44, which no longer uses freetype for font loading. This means that type1 and bitmap fonts are no longer supported in applications relying on Pango for font rendering (notably, GTK application). See [ upstream issue](https://gitlab.gnome.org/GNOME/pango/issues/386) for more information. + +- The `roundcube` module has been hardened. + + - The password of the database is not written world readable in the store any more. If `database.host` is set to `localhost`, then a unix user of the same name as the database will be created and PostreSQL peer authentication will be used, removing the need for a password. Otherwise, a password is still needed and can be provided with the new option `database.passwordFile`, which should be set to the path of a file containing the password and readable by the user `nginx` only. The `database.password` option is insecure and deprecated. Usage of this option will print a warning. + + - A random `des_key` is set by default in the configuration of roundcube, instead of using the hardcoded and insecure default. To ensure a clean migration, all users will be logged out when you upgrade to this release. + +- The packages `openobex` and `obexftp` are no longer installed when enabling Bluetooth via `hardware.bluetooth.enable`. + +- The `dump1090` derivation has been changed to use FlightAware\'s dump1090 as its upstream. However, this version does not have an internal webserver anymore. The assets in the `share/dump1090` directory of the derivation can be used in conjunction with an external webserver to replace this functionality. + +- The fourStore and fourStoreEndpoint modules have been removed. + +- Polkit no longer has the user of uid 0 (root) as an admin identity. We now follow the upstream default of only having every member of the wheel group admin privileged. Before it was root and members of wheel. The positive outcome of this is pkexec GUI popups or terminal prompts will no longer require the user to choose between two essentially equivalent choices (whether to perform the action as themselves with wheel permissions, or as the root user). + +- NixOS containers no longer build NixOS manual by default. This saves evaluation time, especially if there are many declarative containers defined. Note that this is already done when `<nixos/modules/profiles/minimal.nix>` module is included in container config. + +- The `kresd` services deprecates the `interfaces` option in favor of the `listenPlain` option which requires full [systemd.socket compatible](https://www.freedesktop.org/software/systemd/man/systemd.socket.html#ListenStream=) declaration which always include a port. + +- Virtual console options have been reorganized and can be found under a single top-level attribute: `console`. The full set of changes is as follows: + + - `i18n.consoleFont` renamed to [console.font](options.html#opt-console.font) + + - `i18n.consoleKeyMap` renamed to [console.keyMap](options.html#opt-console.keyMap) + + - `i18n.consoleColors` renamed to [console.colors](options.html#opt-console.colors) + + - `i18n.consolePackages` renamed to [console.packages](options.html#opt-console.packages) + + - `i18n.consoleUseXkbConfig` renamed to [console.useXkbConfig](options.html#opt-console.useXkbConfig) + + - `boot.earlyVconsoleSetup` renamed to [console.earlySetup](options.html#opt-console.earlySetup) + + - `boot.extraTTYs` renamed to `console.extraTTYs`. + +- The [awstats](options.html#opt-services.awstats.enable) module has been rewritten to serve stats via static html pages, updated on a timer, over [nginx](options.html#opt-services.nginx.virtualHosts), instead of dynamic cgi pages over [apache](options.html#opt-services.httpd.enable). + + Minor changes will be required to migrate existing configurations. Details of the required changes can seen by looking through the [awstats](options.html#opt-services.awstats.enable) module. + +- The httpd module no longer provides options to support serving web content without defining a virtual host. As a result of this the [services.httpd.logPerVirtualHost](options.html#opt-services.httpd.logPerVirtualHost) option now defaults to `true` instead of `false`. Please update your configuration to make use of [services.httpd.virtualHosts](options.html#opt-services.httpd.virtualHosts). + + The [services.httpd.virtualHosts.\<name\>](options.html#opt-services.httpd.virtualHosts) option has changed type from a list of submodules to an attribute set of submodules, better matching [services.nginx.virtualHosts.\<name\>](options.html#opt-services.nginx.virtualHosts). + + This change comes with the addition of the following options which mimic the functionality of their `nginx` counterparts: [services.httpd.virtualHosts.\<name\>.addSSL](options.html#opt-services.httpd.virtualHosts), [services.httpd.virtualHosts.\<name\>.forceSSL](options.html#opt-services.httpd.virtualHosts), [services.httpd.virtualHosts.\<name\>.onlySSL](options.html#opt-services.httpd.virtualHosts), [services.httpd.virtualHosts.\<name\>.enableACME](options.html#opt-services.httpd.virtualHosts), [services.httpd.virtualHosts.\<name\>.acmeRoot](options.html#opt-services.httpd.virtualHosts), and [services.httpd.virtualHosts.\<name\>.useACMEHost](options.html#opt-services.httpd.virtualHosts). + +- For NixOS configuration options, the `loaOf` type has been deprecated and will be removed in a future release. In nixpkgs, options of this type will be changed to `attrsOf` instead. If you were using one of these in your configuration, you will see a warning suggesting what changes will be required. + + For example, [users.users](options.html#opt-users.users) is a `loaOf` option that is commonly used as follows: + + ```nix + { + users.users = + [ { name = "me"; + description = "My personal user."; + isNormalUser = true; + } + ]; + } + ``` + + This should be rewritten by removing the list and using the value of `name` as the name of the attribute set: + + ```nix + { + users.users.me = + { description = "My personal user."; + isNormalUser = true; + }; + } + ``` + + For more information on this change have look at these links: [issue \#1800](https://github.com/NixOS/nixpkgs/issues/1800), [PR \#63103](https://github.com/NixOS/nixpkgs/pull/63103). + +- For NixOS modules, the types `types.submodule` and `types.submoduleWith` now support paths as allowed values, similar to how `imports` supports paths. Because of this, if you have a module that defines an option of type `either (submodule ...) path`, it will break since a path is now treated as the first type instead of the second. To fix this, change the type to `either path (submodule ...)`. + +- The [Buildkite Agent](options.html#opt-services.buildkite-agents) module and corresponding packages have been updated to 3.x, and to support multiple instances of the agent running at the same time. This means you will have to rename `services.buildkite-agent` to `services.buildkite-agents.<name>`. Furthermore, the following options have been changed: + + - `services.buildkite-agent.meta-data` has been renamed to [services.buildkite-agents.\<name\>.tags](options.html#opt-services.buildkite-agents), to match upstreams naming for 3.x. Its type has also changed - it now accepts an attrset of strings. + + - The`services.buildkite-agent.openssh.publicKeyPath` option has been removed, as it\'s not necessary to deploy public keys to clone private repositories. + + - `services.buildkite-agent.openssh.privateKeyPath` has been renamed to [buildkite-agents.\<name\>.privateSshKeyPath](options.html#opt-services.buildkite-agents), as the whole `openssh` now only contained that single option. + + - [services.buildkite-agents.\<name\>.shell](options.html#opt-services.buildkite-agents) has been introduced, allowing to specify a custom shell to be used. + +- The `citrix_workspace_19_3_0` package has been removed as it will be EOLed within the lifespan of 20.03. For further information, please refer to the [support and maintenance information](https://www.citrix.com/de-de/support/product-lifecycle/milestones/receiver.html) from upstream. + +- The `gcc5` and `gfortran5` packages have been removed. + +- The `services.xserver.displayManager.auto` module has been removed. It was only intended for use in internal NixOS tests, and gave the false impression of it being a special display manager when it\'s actually LightDM. Please use the `services.xserver.displayManager.lightdm.autoLogin` options instead, or any other display manager in NixOS as they all support auto-login. If you used this module specifically because it permitted root auto-login you can override the lightdm-autologin pam module like: + + ```nix + { + security.pam.services.lightdm-autologin.text = lib.mkForce '' + auth requisite pam_nologin.so + auth required pam_succeed_if.so quiet + auth required pam_permit.so + + account include lightdm + + password include lightdm + + session include lightdm + ''; + } + ``` + + The difference is the: + + ``` + auth required pam_succeed_if.so quiet + ``` + + line, where default it\'s: + + ``` + auth required pam_succeed_if.so uid >= 1000 quiet + ``` + + not permitting users with uid\'s below 1000 (like root). All other display managers in NixOS are configured like this. + +- There have been lots of improvements to the Mailman module. As a result, + + - The `services.mailman.hyperkittyBaseUrl` option has been renamed to [services.mailman.hyperkitty.baseUrl](options.html#opt-services.mailman.hyperkitty.baseUrl). + + - The `services.mailman.hyperkittyApiKey` option has been removed. This is because having an option for the Hyperkitty API key meant that the API key would be stored in the world-readable Nix store, which was a security vulnerability. A new Hyperkitty API key will be generated the first time the new Hyperkitty service is run, and it will then be persisted outside of the Nix store. To continue using Hyperkitty, you must set [services.mailman.hyperkitty.enable](options.html#opt-services.mailman.hyperkitty.enable) to `true`. + + - Additionally, some Postfix configuration must now be set manually instead of automatically by the Mailman module: + + ```nix + { + services.postfix.relayDomains = [ "hash:/var/lib/mailman/data/postfix_domains" ]; + services.postfix.config.transport_maps = [ "hash:/var/lib/mailman/data/postfix_lmtp" ]; + services.postfix.config.local_recipient_maps = [ "hash:/var/lib/mailman/data/postfix_lmtp" ]; + } + ``` + + This is because some users may want to include other values in these lists as well, and this was not possible if they were set automatically by the Mailman module. It would not have been possible to just concatenate values from multiple modules each setting the values they needed, because the order of elements in the list is significant. + +- The LLVM versions 3.5, 3.9 and 4 (including the corresponding CLang versions) have been dropped. + +- The `networking.interfaces.*.preferTempAddress` option has been replaced by `networking.interfaces.*.tempAddress`. The new option allows better control of the IPv6 temporary addresses, including completely disabling them for interfaces where they are not needed. + +- Rspamd was updated to version 2.2. Read [ the upstream migration notes](https://rspamd.com/doc/migration.html#migration-to-rspamd-20) carefully. Please be especially aware that some modules were removed and the default Bayes backend is now Redis. + +- The `*psu` versions of oraclejdk8 have been removed as they aren\'t provided by upstream anymore. + +- The `services.dnscrypt-proxy` module has been removed as it used the deprecated version of dnscrypt-proxy. We\'ve added [services.dnscrypt-proxy2.enable](options.html#opt-services.dnscrypt-proxy2.enable) to use the supported version. This module supports configuration via the Nix attribute set [services.dnscrypt-proxy2.settings](options.html#opt-services.dnscrypt-proxy2.settings), or by passing a TOML configuration file via [services.dnscrypt-proxy2.configFile](options.html#opt-services.dnscrypt-proxy2.configFile). + + ```nix + { + # Example configuration: + services.dnscrypt-proxy2.enable = true; + services.dnscrypt-proxy2.settings = { + listen_addresses = [ "127.0.0.1:43" ]; + sources.public-resolvers = { + urls = [ "https://download.dnscrypt.info/resolvers-list/v2/public-resolvers.md" ]; + cache_file = "public-resolvers.md"; + minisign_key = "RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3"; + refresh_delay = 72; + }; + }; + + services.dnsmasq.enable = true; + services.dnsmasq.servers = [ "127.0.0.1#43" ]; + } + ``` + +- `qesteidutil` has been deprecated in favor of `qdigidoc`. + +- sqldeveloper_18 has been removed as it\'s not maintained anymore, sqldeveloper has been updated to version `19.4`. Please note that this means that this means that the oraclejdk is now required. For further information please read the [release notes](https://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/sqldev-relnotes-194-5908846.html). + +- Haskell `env` and `shellFor` dev shell environments now organize dependencies the same way as regular builds. In particular, rather than receiving all the different lists of dependencies mashed together as one big list, and then partitioning into Haskell and non-Hakell dependencies, they work from the original many different dependency parameters and don\'t need to algorithmically partition anything. + + This means that if you incorrectly categorize a dependency, e.g. non-Haskell library dependency as a `buildDepends` or run-time Haskell dependency as a `setupDepends`, whereas things would have worked before they may not work now. + +- The gcc-snapshot-package has been removed. It\'s marked as broken for \>2 years and used to point to a fairly old snapshot from the gcc7-branch. + +- The nixos-build-vms8 -script now uses the python test-driver. + +- The riot-web package now accepts configuration overrides as an attribute set instead of a string. A formerly used JSON configuration can be converted to an attribute set with `builtins.fromJSON`. + + The new default configuration also disables automatic guest account registration and analytics to improve privacy. The previous behavior can be restored by setting `config.riot-web.conf = { disable_guests = false; piwik = true; }`. + +- Stand-alone usage of `Upower` now requires `services.upower.enable` instead of just installing into [environment.systemPackages](options.html#opt-environment.systemPackages). + +- nextcloud has been updated to `v18.0.2`. This means that users from NixOS 19.09 can\'t upgrade directly since you can only move one version forward and 19.09 uses `v16.0.8`. + + To provide a safe upgrade-path and to circumvent similar issues in the future, the following measures were taken: + + - The pkgs.nextcloud-attribute has been removed and replaced with versioned attributes (currently pkgs.nextcloud17 and pkgs.nextcloud18). With this change major-releases can be backported without breaking stuff and to make upgrade-paths easier. + + - Existing setups will be detected using [system.stateVersion](options.html#opt-system.stateVersion): by default, nextcloud17 will be used, but will raise a warning which notes that after that deploy it\'s recommended to update to the latest stable version (nextcloud18) by declaring the newly introduced setting [services.nextcloud.package](options.html#opt-services.nextcloud.package). + + - Users with an overlay (e.g. to use nextcloud at version `v18` on `19.09`) will get an evaluation error by default. This is done to ensure that our [package](options.html#opt-services.nextcloud.package)-option doesn\'t select an older version by accident. It\'s recommended to use pkgs.nextcloud18 or to set [package](options.html#opt-services.nextcloud.package) to pkgs.nextcloud explicitly. + + ::: {.warning} + Please note that if you\'re coming from `19.03` or older, you have to manually upgrade to `19.09` first to upgrade your server to Nextcloud v16. + ::: + +- Hydra has gained a massive performance improvement due to [some database schema changes](https://github.com/NixOS/hydra/pull/710) by adding several IDs and better indexing. However, it\'s necessary to upgrade Hydra in multiple steps: + + - At first, an older version of Hydra needs to be deployed which adds those (nullable) columns. When having set [stateVersion ](options.html#opt-system.stateVersion) to a value older than `20.03`, this package will be selected by default from the module when upgrading. Otherwise, the package can be deployed using the following config: + + ```nix + { pkgs, ... }: { + services.hydra.package = pkgs.hydra-migration; + } + ``` + +- Automatically fill the newly added ID columns on the server by running the following command: + + ```ShellSession + $ hydra-backfill-ids + ``` + ::: {.warning} + Please note that this process can take a while depending on your database-size! + ::: + +- Deploy a newer version of Hydra to activate the DB optimizations. This can be done by using hydra-unstable. This package already includes [flake-support](https://github.com/nixos/rfcs/pull/49) and is therefore compiled against pkgs.nixFlakes. + + ::: {.warning} + If your [stateVersion](options.html#opt-system.stateVersion) is set to `20.03` or greater, hydra-unstable will be used automatically! This will break your setup if you didn\'t run the migration. + ::: + + Please note that Hydra is currently not available with nixStable as this doesn\'t compile anymore. + + ::: {.warning} + pkgs.hydra has been removed to ensure a graceful database-migration using the dedicated package-attributes. If you still have pkgs.hydra defined in e.g. an overlay, an assertion error will be thrown. To circumvent this, you need to set [services.hydra.package](options.html#opt-services.hydra.package) to pkgs.hydra explicitly and make sure you know what you\'re doing! + ::: + +- The TokuDB storage engine will be disabled in mariadb 10.5. It is recommended to switch to RocksDB. See also [TokuDB](https://mariadb.com/kb/en/tokudb/). + +## Other Notable Changes {#sec-release-20.03-notable-changes} + +- SD images are now compressed by default using `bzip2`. + +- The nginx web server previously started its master process as root privileged, then ran worker processes as a less privileged identity user (the `nginx` user). This was changed to start all of nginx as a less privileged user (defined by `services.nginx.user` and `services.nginx.group`). As a consequence, all files that are needed for nginx to run (included configuration fragments, SSL certificates and keys, etc.) must now be readable by this less privileged user/group. + + To continue to use the old approach, you can configure: + + ```nix + { + services.nginx.appendConfig = let cfg = config.services.nginx; in ''user ${cfg.user} ${cfg.group};''; + systemd.services.nginx.serviceConfig.User = lib.mkForce "root"; + } + ``` + +- OpenSSH has been upgraded from 7.9 to 8.1, improving security and adding features but with potential incompatibilities. Consult the [ release announcement](https://www.openssh.com/txt/release-8.1) for more information. + +- `PRETTY_NAME` in `/etc/os-release` now uses the short rather than full version string. + +- The ACME module has switched from simp-le to [lego](https://github.com/go-acme/lego) which allows us to support DNS-01 challenges and wildcard certificates. The following options have been added: [security.acme.acceptTerms](options.html#opt-security.acme.acceptTerms), [security.acme.certs.\<name\>.dnsProvider](options.html#opt-security.acme.certs), [security.acme.certs.\<name\>.credentialsFile](options.html#opt-security.acme.certs), [security.acme.certs.\<name\>.dnsPropagationCheck](options.html#opt-security.acme.certs). As well as this, the options `security.acme.acceptTerms` and either `security.acme.email` or `security.acme.certs.<name>.email` must be set in order to use the ACME module. Certificates will be regenerated on activation, no account or certificate will be migrated from simp-le. In particular private keys will not be preserved. However, the credentials for simp-le are preserved and thus it is possible to roll back to previous versions without breaking certificate generation. Note also that in contrary to simp-le a new private key is recreated at each renewal by default, which can have consequences if you embed your public key in apps. + +- It is now possible to unlock LUKS-Encrypted file systems using a FIDO2 token via `boot.initrd.luks.fido2Support`. + +- Predictably named network interfaces get renamed in stage-1. This means that it is possible to use the proper interface name for e.g. Dropbear setups. + + For further reference, please read [\#68953](https://github.com/NixOS/nixpkgs/pull/68953) or the corresponding [discourse thread](https://discourse.nixos.org/t/predictable-network-interface-names-in-initrd/4055). + +- The matrix-synapse-package has been updated to [v1.11.1](https://github.com/matrix-org/synapse/releases/tag/v1.11.1). Due to [stricter requirements](https://github.com/matrix-org/synapse/releases/tag/v1.10.0rc1) for database configuration when using postgresql, the automated database setup of the module has been removed to avoid any further edge-cases. + + matrix-synapse expects `postgresql`-databases to have the options `LC_COLLATE` and `LC_CTYPE` set to [`'C'`](https://www.postgresql.org/docs/12/locale.html) which basically instructs `postgresql` to ignore any locale-based preferences. + + Depending on your setup, you need to incorporate one of the following changes in your setup to upgrade to 20.03: + + - If you use `sqlite3` you don\'t need to do anything. + + - If you use `postgresql` on a different server, you don\'t need to change anything as well since this module was never designed to configure remote databases. + + - If you use `postgresql` and configured your synapse initially on `19.09` or older, you simply need to enable postgresql-support explicitly: + + ```nix + { ... }: { + services.matrix-synapse = { + enable = true; + /* and all the other config you've defined here */ + }; + services.postgresql.enable = true; + } + ``` + +- If you deploy a fresh matrix-synapse, you need to configure the database yourself (e.g. by using the [services.postgresql.initialScript](options.html#opt-services.postgresql.initialScript) option). An example for this can be found in the [documentation of the Matrix module](#module-services-matrix). + +- If you initially deployed your matrix-synapse on `nixos-unstable` _after_ the `19.09`-release, your database is misconfigured due to a regression in NixOS. For now, matrix-synapse will startup with a warning, but it\'s recommended to reconfigure the database to set the values `LC_COLLATE` and `LC_CTYPE` to [`'C'`](https://www.postgresql.org/docs/12/locale.html). + +- The [systemd.network.links](options.html#opt-systemd.network.links) option is now respected even when [systemd-networkd](options.html#opt-systemd.network.enable) is disabled. This mirrors the behaviour of systemd - It\'s udev that parses `.link` files, not `systemd-networkd`. + +- mongodb has been updated to version `3.4.24`. + + ::: {.warning} + Please note that mongodb has been relicensed under their own [` sspl`](https://www.mongodb.com/licensing/server-side-public-license/faq)-license. Since it\'s not entirely free and not OSI-approved, it\'s listed as non-free. This means that Hydra doesn\'t provide prebuilt mongodb-packages and needs to be built locally. + ::: diff --git a/nixos/doc/manual/release-notes/rl-2003.xml b/nixos/doc/manual/release-notes/rl-2003.xml deleted file mode 100644 index 4206f44f6c7..00000000000 --- a/nixos/doc/manual/release-notes/rl-2003.xml +++ /dev/null @@ -1,1252 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.03"> - <title>Release 20.03 (“Markhor”, 2020.04/20)</title> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.03-highlights"> - <title>Highlights</title> - - <para> - In addition to numerous new and upgraded packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - Support is planned until the end of October 2020, handing over to 20.09. - </para> - </listitem> - <listitem> - <para>Core version changes:</para> - <para>gcc: 8.3.0 -> 9.2.0</para> - <para>glibc: 2.27 -> 2.30</para> - <para>linux: 4.19 -> 5.4</para> - <para>mesa: 19.1.5 -> 19.3.3</para> - <para>openssl: 1.0.2u -> 1.1.1d</para> - </listitem> - <listitem> - <para>Desktop version changes:</para> - <para>plasma5: 5.16.5 -> 5.17.5</para> - <para>kdeApplications: 19.08.2 -> 19.12.3</para> - <para>gnome3: 3.32 -> 3.34</para> - <para>pantheon: 5.0 -> 5.1.3</para> - </listitem> - <listitem> - <para> - Linux kernel is updated to branch 5.4 by default (from 4.19). - </para> - </listitem> - <listitem> - <para> - Grub is updated to 2.04, adding support for booting from F2FS filesystems and - Btrfs volumes using zstd compression. Note that some users have been unable -to boot after upgrading to 2.04 - for more information, please see <link -xlink:href="https://github.com/NixOS/nixpkgs/issues/61718#issuecomment-617618503">this - discussion</link>. - </para> - </listitem> - <listitem> - <para> - Postgresql for NixOS service now defaults to v11. - </para> - </listitem> - <listitem> - <para> - The graphical installer image starts the graphical session automatically. - Before you'd be greeted by a tty and asked to enter <command>systemctl start display-manager</command>. - It is now possible to disable the display-manager from running by selecting the <literal>Disable display-manager</literal> - quirk in the boot menu. - </para> - </listitem> - <listitem> - <para> - GNOME 3 has been upgraded to 3.34. Please take a look at their - <link xlink:href="https://help.gnome.org/misc/release-notes/3.34">Release Notes</link> - for details. - </para> - </listitem> - <listitem> - <para> - If you enable the Pantheon Desktop Manager via - <xref linkend="opt-services.xserver.desktopManager.pantheon.enable" />, we now default to also use - <link xlink:href="https://blog.elementary.io/say-hello-to-the-new-greeter/"> - Pantheon's newly designed greeter - </link>. - Contrary to NixOS's usual update policy, Pantheon will receive updates during the cycle of - NixOS 20.03 when backwards compatible. - </para> - </listitem> - <listitem> - <para> - By default zfs pools will now be trimmed on a weekly basis. - Trimming is only done on supported devices (i.e. NVME or SSDs) - and should improve throughput and lifetime of these devices. - It is controlled by the <varname>services.zfs.trim.enable</varname> varname. - The zfs scrub service (<varname>services.zfs.autoScrub.enable</varname>) - and the zfs autosnapshot service (<varname>services.zfs.autoSnapshot.enable</varname>) - are now only enabled if zfs is set in <varname>config.boot.initrd.supportedFilesystems</varname> or - <varname>config.boot.supportedFilesystems</varname>. These lists will automatically contain - zfs as soon as any zfs mountpoint is configured in <varname>fileSystems</varname>. - </para> - </listitem> - <listitem> - <para> - <command>nixos-option</command> has been rewritten in C++, speeding it up, improving correctness, - and adding a <option>-r</option> option which prints all options and their values recursively. - </para> - </listitem> - <listitem> - <para> - <option>services.xserver.desktopManager.default</option> and <option>services.xserver.windowManager.default</option> options were replaced by a single <xref linkend="opt-services.xserver.displayManager.defaultSession"/> option to improve support for upstream session files. If you used something like: -<programlisting> -services.xserver.desktopManager.default = "xfce"; -services.xserver.windowManager.default = "icewm"; -</programlisting> - you should change it to: -<programlisting> -services.xserver.displayManager.defaultSession = "xfce+icewm"; -</programlisting> - </para> - </listitem> - <listitem> - <para> - The testing driver implementation in NixOS is now in Python <filename>make-test-python.nix</filename>. - This was done by Jacek Galowicz (<link xlink:href="https://github.com/tfc">@tfc</link>), and with the - collaboration of Julian Stecklina (<link xlink:href="https://github.com/blitz">@blitz</link>) and - Jana Traue (<link xlink:href="https://github.com/jtraue">@jtraue</link>). All documentation has been updated to use this - testing driver, and a vast majority of the 286 tests in NixOS were ported to python driver. In 20.09 the Perl driver implementation, - <filename>make-test.nix</filename>, is slated for removal. This should give users of the NixOS integration framework - a transitory period to rewrite their tests to use the Python implementation. Users of the Perl driver will see - this warning everytime they use it: -<screen> -<prompt>$ </prompt>warning: Perl VM tests are deprecated and will be removed for 20.09. -Please update your tests to use the python test driver. -See https://github.com/NixOS/nixpkgs/pull/71684 for details. -</screen> - API compatibility is planned to be kept for at least the next release with the perl driver. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.03-new-services"> - <title>New Services</title> - - <para> - The following new services were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - The kubernetes kube-proxy now supports a new hostname configuration - <literal>services.kubernetes.proxy.hostname</literal> which has to - be set if the hostname of the node should be non default. - </para> - </listitem> - <listitem> - <para> - UPower's configuration is now managed by NixOS and can be customized - via <option>services.upower</option>. - </para> - </listitem> - <listitem> - <para> - To use Geary you should enable <xref linkend="opt-programs.geary.enable"/> instead of - just adding it to <xref linkend="opt-environment.systemPackages"/>. - It was created so Geary could function properly outside of GNOME. - </para> - </listitem> - <listitem> - <para> - <filename>./config/console.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./hardware/brillo.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./hardware/tuxedo-keyboard.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./programs/bandwhich.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./programs/bash-my-aws.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./programs/liboping.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./programs/traceroute.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/backup/sanoid.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/backup/syncoid.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/backup/zfs-replication.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/continuous-integration/buildkite-agents.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/databases/victoriametrics.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/desktops/gnome3/gnome-initial-setup.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/desktops/neard.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/games/openarena.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/hardware/fancontrol.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/mail/sympa.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/misc/freeswitch.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/misc/mame.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/monitoring/do-agent.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/monitoring/prometheus/xmpp-alerts.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/network-filesystems/orangefs/server.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/network-filesystems/orangefs/client.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/3proxy.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/corerad.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/go-shadowsocks2.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/ntp/openntpd.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/shorewall.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/shorewall6.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/spacecookie.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/trickster.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/v2ray.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/xandikos.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/networking/yggdrasil.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/dokuwiki.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/gotify-server.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/grocy.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/ihatemoney</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/moinmoin.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/trac.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/trilium.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-apps/shiori.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/web-servers/ttyd.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/x11/picom.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/x11/hardware/digimend.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./services/x11/imwheel.nix</filename> - </para> - </listitem> - <listitem> - <para> - <filename>./virtualisation/cri-o.nix</filename> - </para> - </listitem> - </itemizedlist> - - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.03-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - The <package>dhcpcd</package> package <link xlink:href="https://roy.marples.name/archives/dhcpcd-discuss/0002621.html"> - does not request IPv4 addresses for tap and bridge interfaces anymore by default</link>. - In order to still get an address on a bridge interface, one has to disable - <literal>networking.useDHCP</literal> and explicitly enable - <literal>networking.interfaces.<name>.useDHCP</literal> on - every interface, that should get an address via DHCP. This way, dhcpcd - is configured in an explicit way about which interface to run on. - </para> - </listitem> - <listitem> - <para> - GnuPG is now built without support for a graphical passphrase entry - by default. Please enable the <literal>gpg-agent</literal> user service - via the NixOS option <literal>programs.gnupg.agent.enable</literal>. - Note that upstream recommends using <literal>gpg-agent</literal> and - will spawn a <literal>gpg-agent</literal> on the first invocation of - GnuPG anyway. - </para> - </listitem> - <listitem> - <para> - The <literal>dynamicHosts</literal> option has been removed from the - <link linkend="opt-networking.networkmanager.enable">NetworkManager</link> - module. Allowing (multiple) regular users to override host entries - affecting the whole system opens up a huge attack vector. - There seem to be very rare cases where this might be useful. - Consider setting system-wide host entries using - <link linkend="opt-networking.hosts">networking.hosts</link>, provide - them via the DNS server in your network, or use - <link linkend="opt-environment.etc">environment.etc</link> - to add a file into <literal>/etc/NetworkManager/dnsmasq.d</literal> - reconfiguring <literal>hostsdir</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>99-main.network</literal> file was removed. Matching all - network interfaces caused many breakages, see - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/18962">#18962</link> - and <link xlink:href="https://github.com/NixOS/nixpkgs/pull/71106">#71106</link>. - </para> - <para> - We already don't support the global <link linkend="opt-networking.useDHCP">networking.useDHCP</link>, - <link linkend="opt-networking.defaultGateway">networking.defaultGateway</link> and - <link linkend="opt-networking.defaultGateway6">networking.defaultGateway6</link> options - if <link linkend="opt-networking.useNetworkd">networking.useNetworkd</link> is enabled, - but direct users to configure the per-device - <link linkend="opt-networking.interfaces">networking.interfaces.<name>.…</link> options. - </para> - </listitem> - <listitem> - <para> - The stdenv now runs all bash with <literal>set -u</literal>, to catch the use of undefined variables. - Before, it itself used <literal>set -u</literal> but was careful to unset it so other packages' code ran as before. - Now, all bash code is held to the same high standard, and the rather complex stateful manipulation of the options can be discarded. - </para> - </listitem> - <listitem> - <para> - The SLIM Display Manager has been removed, as it has been unmaintained since 2013. - Consider migrating to a different display manager such as LightDM (current default in NixOS), - SDDM, GDM, or using the startx module which uses Xinitrc. - </para> - </listitem> - <listitem> - <para> - The Way Cooler wayland compositor has been removed, as the project has been officially canceled. - There are no more <literal>way-cooler</literal> attribute and <literal>programs.way-cooler</literal> options. - </para> - </listitem> - <listitem> - <para> - The BEAM package set has been deleted. You will only find there the different interpreters. - You should now use the different build tools coming with the languages with sandbox mode disabled. - </para> - </listitem> - <listitem> - <para> - There is now only one Xfce package-set and module. This means that attributes <literal>xfce4-14</literal> - and <literal>xfceUnstable</literal> all now point to the latest Xfce 4.14 - packages. And in the future NixOS releases will be the latest released version of Xfce available at the - time of the release's development (if viable). - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-services.phpfpm.pools">phpfpm</link> module now sets - <literal>PrivateTmp=true</literal> in its systemd units for better process isolation. - If you rely on <literal>/tmp</literal> being shared with other services, explicitly override this by - setting <literal>serviceConfig.PrivateTmp</literal> to <literal>false</literal> for each phpfpm unit. - </para> - </listitem> - <listitem> - <para> - KDE’s old multimedia framework Phonon no longer supports Qt 4. For that reason, Plasma desktop also does not have <option>enableQt4Support</option> option any more. - </para> - </listitem> - <listitem> - <para> - The BeeGFS module has been removed. - </para> - </listitem> - <listitem> - <para> - The osquery module has been removed. - </para> - </listitem> - <listitem> - <para> - Going forward, <literal>~/bin</literal> in the users home directory will no longer be in <literal>PATH</literal> by default. - If you depend on this you should set the option <literal>environment.homeBinInPath</literal> to <literal>true</literal>. - The aforementioned option was added this release. - </para> - </listitem> - <listitem> - <para> - The <literal>buildRustCrate</literal> infrastructure now produces <literal>lib</literal> outputs in addition to the <literal>out</literal> output. - This has led to drastically reduced closure sizes for some rust crates since development dependencies are now in the <literal>lib</literal> output. - </para> - </listitem> - <listitem> - <para> - Pango was upgraded to 1.44, which no longer uses freetype for font loading. This means that type1 - and bitmap fonts are no longer supported in applications relying on Pango for font rendering - (notably, GTK application). See <link xlink:href="https://gitlab.gnome.org/GNOME/pango/issues/386"> - upstream issue</link> for more information. - </para> - </listitem> - <listitem> - <para> - The <literal>roundcube</literal> module has been hardened. - <itemizedlist> - <listitem> - <para> - The password of the database is not written world readable in the store any more. If <literal>database.host</literal> is set to <literal>localhost</literal>, then a unix user of the same name as the database will be created and PostreSQL peer authentication will be used, removing the need for a password. Otherwise, a password is still needed and can be provided with the new option <literal>database.passwordFile</literal>, which should be set to the path of a file containing the password and readable by the user <literal>nginx</literal> only. The <literal>database.password</literal> option is insecure and deprecated. Usage of this option will print a warning. - </para> - </listitem> - <listitem> - <para> - A random <literal>des_key</literal> is set by default in the configuration of roundcube, instead of using the hardcoded and insecure default. To ensure a clean migration, all users will be logged out when you upgrade to this release. - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - The packages <literal>openobex</literal> and <literal>obexftp</literal> - are no longer installed when enabling Bluetooth via - <option>hardware.bluetooth.enable</option>. - </para> - </listitem> - <listitem> - <para> - The <literal>dump1090</literal> derivation has been changed to use FlightAware's dump1090 - as its upstream. However, this version does not have an internal webserver anymore. The - assets in the <literal>share/dump1090</literal> directory of the derivation can be used - in conjunction with an external webserver to replace this functionality. - </para> - </listitem> - <listitem> - <para> - The fourStore and fourStoreEndpoint modules have been removed. - </para> - </listitem> - <listitem> - <para> - Polkit no longer has the user of uid 0 (root) as an admin identity. - We now follow the upstream default of only having every member of the wheel - group admin privileged. Before it was root and members of wheel. - The positive outcome of this is pkexec GUI popups or terminal prompts - will no longer require the user to choose between two essentially equivalent - choices (whether to perform the action as themselves with wheel permissions, or as the root user). - </para> - </listitem> - <listitem> - <para> - NixOS containers no longer build NixOS manual by default. This saves evaluation time, - especially if there are many declarative containers defined. Note that this is already done - when <literal><nixos/modules/profiles/minimal.nix></literal> module is included - in container config. - </para> - </listitem> - <listitem> - <para> - The <literal>kresd</literal> services deprecates the <literal>interfaces</literal> option - in favor of the <literal>listenPlain</literal> option which requires full - <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.socket.html#ListenStream=">systemd.socket compatible</link> - declaration which always include a port. - </para> - </listitem> - <listitem> - <para> - Virtual console options have been reorganized and can be found under - a single top-level attribute: <literal>console</literal>. - The full set of changes is as follows: - </para> - <itemizedlist> - <listitem> - <para> - <literal>i18n.consoleFont</literal> renamed to - <link linkend="opt-console.font">console.font</link> - </para> - </listitem> - <listitem> - <para> - <literal>i18n.consoleKeyMap</literal> renamed to - <link linkend="opt-console.keyMap">console.keyMap</link> - </para> - </listitem> - <listitem> - <para> - <literal>i18n.consoleColors</literal> renamed to - <link linkend="opt-console.colors">console.colors</link> - </para> - </listitem> - <listitem> - <para> - <literal>i18n.consolePackages</literal> renamed to - <link linkend="opt-console.packages">console.packages</link> - </para> - </listitem> - <listitem> - <para> - <literal>i18n.consoleUseXkbConfig</literal> renamed to - <link linkend="opt-console.useXkbConfig">console.useXkbConfig</link> - </para> - </listitem> - <listitem> - <para> - <literal>boot.earlyVconsoleSetup</literal> renamed to - <link linkend="opt-console.earlySetup">console.earlySetup</link> - </para> - </listitem> - <listitem> - <para> - <literal>boot.extraTTYs</literal> renamed to - <literal>console.extraTTYs</literal>. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - The <link linkend="opt-services.awstats.enable">awstats</link> module has been rewritten - to serve stats via static html pages, updated on a timer, over <link linkend="opt-services.nginx.virtualHosts">nginx</link>, - instead of dynamic cgi pages over <link linkend="opt-services.httpd.enable">apache</link>. - </para> - <para> - Minor changes will be required to migrate existing configurations. Details of the - required changes can seen by looking through the <link linkend="opt-services.awstats.enable">awstats</link> - module. - </para> - </listitem> - <listitem> - <para> - The httpd module no longer provides options to support serving web content without defining a virtual host. As a - result of this the <link linkend="opt-services.httpd.logPerVirtualHost">services.httpd.logPerVirtualHost</link> - option now defaults to <literal>true</literal> instead of <literal>false</literal>. Please update your - configuration to make use of <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts</link>. - </para> - <para> - The <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name></link> - option has changed type from a list of submodules to an attribute set of submodules, better matching - <link linkend="opt-services.nginx.virtualHosts">services.nginx.virtualHosts.<name></link>. - </para> - <para> - This change comes with the addition of the following options which mimic the functionality of their <literal>nginx</literal> counterparts: - <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.addSSL</link>, - <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.forceSSL</link>, - <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.onlySSL</link>, - <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.enableACME</link>, - <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.acmeRoot</link>, and - <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.useACMEHost</link>. - </para> - </listitem> - <listitem> - <para> - For NixOS configuration options, the <literal>loaOf</literal> type has - been deprecated and will be removed in a future release. In nixpkgs, - options of this type will be changed to <literal>attrsOf</literal> - instead. If you were using one of these in your configuration, you will - see a warning suggesting what changes will be required. - </para> - <para> - For example, <link linkend="opt-users.users">users.users</link> is a - <literal>loaOf</literal> option that is commonly used as follows: - <programlisting> -users.users = - [ { name = "me"; - description = "My personal user."; - isNormalUser = true; - } - ]; - </programlisting> - This should be rewritten by removing the list and using the - value of <literal>name</literal> as the name of the attribute set: - <programlisting> -users.users.me = - { description = "My personal user."; - isNormalUser = true; - }; - </programlisting> - </para> - <para> - For more information on this change have look at these links: - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/1800">issue #1800</link>, - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/63103">PR #63103</link>. - </para> - </listitem> - <listitem> - <para> - For NixOS modules, the types <literal>types.submodule</literal> and <literal>types.submoduleWith</literal> now support - paths as allowed values, similar to how <literal>imports</literal> supports paths. - Because of this, if you have a module that defines an option of type - <literal>either (submodule ...) path</literal>, it will break since a path - is now treated as the first type instead of the second. To fix this, change - the type to <literal>either path (submodule ...)</literal>. - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-services.buildkite-agents">Buildkite - Agent</link> module and corresponding packages have been updated to - 3.x, and to support multiple instances of the agent running at the - same time. This means you will have to rename - <literal>services.buildkite-agent</literal> to - <literal>services.buildkite-agents.<name></literal>. Furthermore, - the following options have been changed: - </para> - <itemizedlist> - <listitem> - <para> - <literal>services.buildkite-agent.meta-data</literal> has been renamed to - <link linkend="opt-services.buildkite-agents">services.buildkite-agents.<name>.tags</link>, - to match upstreams naming for 3.x. - Its type has also changed - it now accepts an attrset of strings. - </para> - </listitem> - <listitem> - <para> - The<literal>services.buildkite-agent.openssh.publicKeyPath</literal> option - has been removed, as it's not necessary to deploy public keys to clone private - repositories. - </para> - </listitem> - <listitem> - <para> - <literal>services.buildkite-agent.openssh.privateKeyPath</literal> - has been renamed to - <link linkend="opt-services.buildkite-agents">buildkite-agents.<name>.privateSshKeyPath</link>, - as the whole <literal>openssh</literal> now only contained that single option. - </para> - </listitem> - <listitem> - <para> - <link linkend="opt-services.buildkite-agents">services.buildkite-agents.<name>.shell</link> - has been introduced, allowing to specify a custom shell to be used. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - The <literal>citrix_workspace_19_3_0</literal> package has been removed as - it will be EOLed within the lifespan of 20.03. For further information, - please refer to the <link xlink:href="https://www.citrix.com/de-de/support/product-lifecycle/milestones/receiver.html">support and maintenance information</link> from upstream. - </para> - </listitem> - <listitem> - <para> - The <literal>gcc5</literal> and <literal>gfortran5</literal> packages have been removed. - </para> - </listitem> - <listitem> - <para> - The <option>services.xserver.displayManager.auto</option> module has been removed. - It was only intended for use in internal NixOS tests, and gave the false impression - of it being a special display manager when it's actually LightDM. - Please use the <option>services.xserver.displayManager.lightdm.autoLogin</option> options instead, - or any other display manager in NixOS as they all support auto-login. If you used this module specifically - because it permitted root auto-login you can override the lightdm-autologin pam module like: -<programlisting> -<link xlink:href="#opt-security.pam.services._name_.text">security.pam.services.lightdm-autologin.text</link> = lib.mkForce '' - auth requisite pam_nologin.so - auth required pam_succeed_if.so quiet - auth required pam_permit.so - - account include lightdm - - password include lightdm - - session include lightdm -''; -</programlisting> - The difference is the: -<programlisting> -auth required pam_succeed_if.so quiet -</programlisting> - line, where default it's: -<programlisting> -auth required pam_succeed_if.so uid >= 1000 quiet -</programlisting> - not permitting users with uid's below 1000 (like root). - All other display managers in NixOS are configured like this. - </para> - </listitem> - <listitem> - <para> - There have been lots of improvements to the Mailman module. As - a result, - </para> - <itemizedlist> - <listitem> - <para> - The <option>services.mailman.hyperkittyBaseUrl</option> - option has been renamed to <xref - linkend="opt-services.mailman.hyperkitty.baseUrl"/>. - </para> - </listitem> - <listitem> - <para> - The <option>services.mailman.hyperkittyApiKey</option> - option has been removed. This is because having an option - for the Hyperkitty API key meant that the API key would be - stored in the world-readable Nix store, which was a - security vulnerability. A new Hyperkitty API key will be - generated the first time the new Hyperkitty service is run, - and it will then be persisted outside of the Nix store. To - continue using Hyperkitty, you must set <xref - linkend="opt-services.mailman.hyperkitty.enable"/> to - <literal>true</literal>. - </para> - </listitem> - <listitem> - <para> - Additionally, some Postfix configuration must now be set - manually instead of automatically by the Mailman module: -<programlisting> -<xref linkend="opt-services.postfix.relayDomains"/> = [ "hash:/var/lib/mailman/data/postfix_domains" ]; -<xref linkend="opt-services.postfix.config"/>.transport_maps = [ "hash:/var/lib/mailman/data/postfix_lmtp" ]; -<xref linkend="opt-services.postfix.config"/>.local_recipient_maps = [ "hash:/var/lib/mailman/data/postfix_lmtp" ]; -</programlisting> - This is because some users may want to include other values - in these lists as well, and this was not possible if they - were set automatically by the Mailman module. It would not - have been possible to just concatenate values from multiple - modules each setting the values they needed, because the - order of elements in the list is significant. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para>The LLVM versions 3.5, 3.9 and 4 (including the corresponding CLang versions) have been dropped.</para> - </listitem> - <listitem> - <para> - The <option>networking.interfaces.*.preferTempAddress</option> option has - been replaced by <option>networking.interfaces.*.tempAddress</option>. - The new option allows better control of the IPv6 temporary addresses, - including completely disabling them for interfaces where they are not - needed. - </para> - </listitem> - <listitem> - <para> - Rspamd was updated to version 2.2. Read - <link xlink:href="https://rspamd.com/doc/migration.html#migration-to-rspamd-20"> - the upstream migration notes</link> carefully. Please be especially - aware that some modules were removed and the default Bayes backend is - now Redis. - </para> - </listitem> - <listitem> - <para> - The <literal>*psu</literal> versions of <package>oraclejdk8</package> have been removed - as they aren't provided by upstream anymore. - </para> - </listitem> - <listitem> - <para> - The <option>services.dnscrypt-proxy</option> module has been removed - as it used the deprecated version of dnscrypt-proxy. We've added - <xref linkend="opt-services.dnscrypt-proxy2.enable"/> to use the supported version. - This module supports configuration via the Nix attribute set - <xref linkend="opt-services.dnscrypt-proxy2.settings" />, or by passing a TOML configuration file via - <xref linkend="opt-services.dnscrypt-proxy2.configFile" />. -<programlisting> -# Example configuration: -services.dnscrypt-proxy2.enable = true; -services.dnscrypt-proxy2.settings = { - listen_addresses = [ "127.0.0.1:43" ]; - sources.public-resolvers = { - urls = [ "https://download.dnscrypt.info/resolvers-list/v2/public-resolvers.md" ]; - cache_file = "public-resolvers.md"; - minisign_key = "RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3"; - refresh_delay = 72; - }; -}; - -services.dnsmasq.enable = true; -services.dnsmasq.servers = [ "127.0.0.1#43" ]; -</programlisting> - </para> - </listitem> - <listitem> - <para> - <literal>qesteidutil</literal> has been deprecated in favor of <literal>qdigidoc</literal>. - </para> - </listitem> - <listitem> - <para> - <package>sqldeveloper_18</package> has been removed as it's not maintained anymore, - <package>sqldeveloper</package> has been updated to version <literal>19.4</literal>. - Please note that this means that this means that the <package>oraclejdk</package> is now - required. For further information please read the - <link xlink:href="https://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/sqldev-relnotes-194-5908846.html">release notes</link>. - </para> - </listitem> - <listitem> - <para> - Haskell <varname>env</varname> and <varname>shellFor</varname> dev shell environments now organize dependencies the same way as regular builds. - In particular, rather than receiving all the different lists of dependencies mashed together as one big list, and then partitioning into Haskell and non-Hakell dependencies, they work from the original many different dependency parameters and don't need to algorithmically partition anything. - </para> - <para> - This means that if you incorrectly categorize a dependency, e.g. non-Haskell library dependency as a <varname>buildDepends</varname> or run-time Haskell dependency as a <varname>setupDepends</varname>, whereas things would have worked before they may not work now. - </para> - </listitem> - <listitem> - <para> - The <package>gcc-snapshot</package>-package has been removed. It's marked as broken for >2 years and used to point - to a fairly old snapshot from the <package>gcc7</package>-branch. - </para> - </listitem> - <listitem> - <para> - The <citerefentry><refentrytitle>nixos-build-vms</refentrytitle><manvolnum>8</manvolnum> - </citerefentry>-script now uses the python test-driver. - </para> - </listitem> - <listitem> - <para> - The <package>riot-web</package> package now accepts configuration overrides as an attribute set instead of a string. - A formerly used JSON configuration can be converted to an attribute set with <literal>builtins.fromJSON</literal>. - </para> - <para> - The new default configuration also disables automatic guest account registration and analytics to improve privacy. - The previous behavior can be restored by setting <literal>config.riot-web.conf = { disable_guests = false; piwik = true; }</literal>. - </para> - </listitem> - <listitem> - <para> - Stand-alone usage of <literal>Upower</literal> now requires - <option>services.upower.enable</option> instead of just installing into - <xref linkend="opt-environment.systemPackages"/>. - </para> - </listitem> - <listitem> - <para> - <package>nextcloud</package> has been updated to <literal>v18.0.2</literal>. This means - that users from NixOS 19.09 can't upgrade directly since you can only move one version - forward and 19.09 uses <literal>v16.0.8</literal>. - </para> - <para> - To provide a safe upgrade-path and to circumvent similar issues in the future, the following - measures were taken: - <itemizedlist> - <listitem> - <para> - The <package>pkgs.nextcloud</package>-attribute has been removed and replaced with - versioned attributes (currently <package>pkgs.nextcloud17</package> and - <package>pkgs.nextcloud18</package>). With this change major-releases can be backported - without breaking stuff and to make upgrade-paths easier. - </para> - </listitem> - <listitem> - <para> - Existing setups will be detected using - <link linkend="opt-system.stateVersion">system.stateVersion</link>: by default, - <package>nextcloud17</package> will be used, but will raise a warning which notes - that after that deploy it's recommended to update to the latest stable version - (<package>nextcloud18</package>) by declaring the newly introduced setting - <link linkend="opt-services.nextcloud.package">services.nextcloud.package</link>. - </para> - </listitem> - <listitem> - <para> - Users with an overlay (e.g. to use <package>nextcloud</package> at version - <literal>v18</literal> on <literal>19.09</literal>) will get an evaluation error - by default. This is done to ensure that our - <link linkend="opt-services.nextcloud.package">package</link>-option doesn't select an - older version by accident. It's recommended to use <package>pkgs.nextcloud18</package> - or to set <link linkend="opt-services.nextcloud.package">package</link> to - <package>pkgs.nextcloud</package> explicitly. - </para> - </listitem> - </itemizedlist> - </para> - <warning> - <para> - Please note that if you're coming from <literal>19.03</literal> or older, you have - to manually upgrade to <literal>19.09</literal> first to upgrade your server - to Nextcloud v16. - </para> - </warning> - </listitem> - <listitem> - <para> - <package>Hydra</package> has gained a massive performance improvement due to - <link xlink:href="https://github.com/NixOS/hydra/pull/710">some database schema - changes</link> by adding several IDs and better indexing. However, it's necessary - to upgrade Hydra in multiple steps: - <itemizedlist> - <listitem> - <para> - At first, an older version of Hydra needs to be deployed which adds those - (nullable) columns. When having set <link linkend="opt-system.stateVersion">stateVersion - </link> to a value older than <literal>20.03</literal>, this package will be selected - by default from the module when upgrading. Otherwise, the package can be deployed using - the following config: -<programlisting>{ pkgs, ... }: { - <link linkend="opt-services.hydra.package">services.hydra.package</link> = pkgs.hydra-migration; -}</programlisting> - </para> - </listitem> - <listitem> - <para> - Automatically fill the newly added ID columns on the server by running the following - command: -<screen> -<prompt>$ </prompt>hydra-backfill-ids -</screen> - <warning> - <para>Please note that this process can take a while depending on your database-size!</para> - </warning> - </para> - </listitem> - <listitem> - <para> - Deploy a newer version of Hydra to activate the DB optimizations. This can be done by - using <package>hydra-unstable</package>. This package already includes - <link xlink:href="https://github.com/nixos/rfcs/pull/49">flake-support</link> and is - therefore compiled against <package>pkgs.nixFlakes</package>. - <warning> - <para> - If your <link linkend="opt-system.stateVersion">stateVersion</link> is set to - <literal>20.03</literal> or greater, <package>hydra-unstable</package> will be used - automatically! This will break your setup if you didn't run the migration. - </para> - </warning> - Please note that Hydra is currently not available with <package>nixStable</package> - as this doesn't compile anymore. - </para> - </listitem> - </itemizedlist> - <warning> - <para> - <package>pkgs.hydra</package> has been removed to ensure a graceful database-migration - using the dedicated package-attributes. If you still have <package>pkgs.hydra</package> - defined in e.g. an overlay, an assertion error will be thrown. To circumvent this, - you need to set <xref linkend="opt-services.hydra.package" /> to <package>pkgs.hydra</package> - explicitly and make sure you know what you're doing! - </para> - </warning> - </para> - </listitem> - <listitem> - <para> - The TokuDB storage engine will be disabled in <package>mariadb</package> 10.5. It is recommended to switch - to RocksDB. See also <link xlink:href="https://mariadb.com/kb/en/tokudb/">TokuDB</link>. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.03-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para>SD images are now compressed by default using <literal>bzip2</literal>.</para> - </listitem> - <listitem> - <para> - The nginx web server previously started its master process as root - privileged, then ran worker processes as a less privileged identity user - (the <literal>nginx</literal> user). - This was changed to start all of nginx as a less privileged user (defined by - <literal>services.nginx.user</literal> and - <literal>services.nginx.group</literal>). As a consequence, all files that - are needed for nginx to run (included configuration fragments, SSL - certificates and keys, etc.) must now be readable by this less privileged - user/group. - </para> - <para> - To continue to use the old approach, you can configure: - <programlisting> -services.nginx.appendConfig = let cfg = config.services.nginx; in ''user ${cfg.user} ${cfg.group};''; -systemd.services.nginx.serviceConfig.User = lib.mkForce "root"; - </programlisting> - </para> - </listitem> - <listitem> - <para> - OpenSSH has been upgraded from 7.9 to 8.1, improving security and adding features - but with potential incompatibilities. Consult the - <link xlink:href="https://www.openssh.com/txt/release-8.1"> - release announcement</link> for more information. - </para> - </listitem> - <listitem> - <para> - <literal>PRETTY_NAME</literal> in <literal>/etc/os-release</literal> - now uses the short rather than full version string. - </para> - </listitem> - <listitem> - <para> - The ACME module has switched from simp-le to <link xlink:href="https://github.com/go-acme/lego">lego</link> - which allows us to support DNS-01 challenges and wildcard certificates. The following options have been added: - <link linkend="opt-security.acme.acceptTerms">security.acme.acceptTerms</link>, - <link linkend="opt-security.acme.certs">security.acme.certs.<name>.dnsProvider</link>, - <link linkend="opt-security.acme.certs">security.acme.certs.<name>.credentialsFile</link>, - <link linkend="opt-security.acme.certs">security.acme.certs.<name>.dnsPropagationCheck</link>. - As well as this, the options <literal>security.acme.acceptTerms</literal> and either - <literal>security.acme.email</literal> or <literal>security.acme.certs.<name>.email</literal> - must be set in order to use the ACME module. - Certificates will be regenerated on activation, no account or certificate will be migrated from simp-le. - In particular private keys will not be preserved. However, the credentials for simp-le are preserved and - thus it is possible to roll back to previous versions without breaking certificate generation. - Note also that in contrary to simp-le a new private key is recreated at each renewal by default, which can - have consequences if you embed your public key in apps. - </para> - </listitem> - <listitem> - <para> - It is now possible to unlock LUKS-Encrypted file systems using a FIDO2 token - via <option>boot.initrd.luks.fido2Support</option>. - </para> - </listitem> - <listitem> - <para> - Predictably named network interfaces get renamed in stage-1. This means that it is possible - to use the proper interface name for e.g. Dropbear setups. - </para> - <para> - For further reference, please read <link xlink:href="https://github.com/NixOS/nixpkgs/pull/68953">#68953</link> or the corresponding <link xlink:href="https://discourse.nixos.org/t/predictable-network-interface-names-in-initrd/4055">discourse thread</link>. - </para> - </listitem> - <listitem> - <para> - The <package>matrix-synapse</package>-package has been updated to - <link xlink:href="https://github.com/matrix-org/synapse/releases/tag/v1.11.1">v1.11.1</link>. - Due to <link xlink:href="https://github.com/matrix-org/synapse/releases/tag/v1.10.0rc1">stricter requirements</link> - for database configuration when using <package>postgresql</package>, the automated database setup - of the module has been removed to avoid any further edge-cases. - </para> - <para> - <package>matrix-synapse</package> expects <literal>postgresql</literal>-databases to have the options - <literal>LC_COLLATE</literal> and <literal>LC_CTYPE</literal> set to - <link xlink:href="https://www.postgresql.org/docs/12/locale.html"><literal>'C'</literal></link> which basically - instructs <literal>postgresql</literal> to ignore any locale-based preferences. - </para> - <para> - Depending on your setup, you need to incorporate one of the following changes in your setup to - upgrade to 20.03: - <itemizedlist> - <listitem><para>If you use <literal>sqlite3</literal> you don't need to do anything.</para></listitem> - <listitem><para>If you use <literal>postgresql</literal> on a different server, you don't need - to change anything as well since this module was never designed to configure remote databases. - </para></listitem> - <listitem><para>If you use <literal>postgresql</literal> and configured your synapse initially on - <literal>19.09</literal> or older, you simply need to enable <package>postgresql</package>-support - explicitly: -<programlisting>{ ... }: { - services.matrix-synapse = { - <link linkend="opt-services.matrix-synapse.enable">enable</link> = true; - /* and all the other config you've defined here */ - }; - <link linkend="opt-services.postgresql.enable">services.postgresql.enable</link> = true; -}</programlisting> - </para></listitem> - <listitem><para>If you deploy a fresh <package>matrix-synapse</package>, you need to configure - the database yourself (e.g. by using the - <link linkend="opt-services.postgresql.initialScript">services.postgresql.initialScript</link> - option). An example for this can be found in the - <link linkend="module-services-matrix">documentation of the Matrix module</link>. - </para></listitem> - <listitem><para>If you initially deployed your <package>matrix-synapse</package> on - <literal>nixos-unstable</literal> <emphasis>after</emphasis> the <literal>19.09</literal>-release, - your database is misconfigured due to a regression in NixOS. For now, <package>matrix-synapse</package> will - startup with a warning, but it's recommended to reconfigure the database to set the values - <literal>LC_COLLATE</literal> and <literal>LC_CTYPE</literal> to - <link xlink:href="https://www.postgresql.org/docs/12/locale.html"><literal>'C'</literal></link>. - </para></listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-systemd.network.links">systemd.network.links</link> option is now respected - even when <link linkend="opt-systemd.network.enable">systemd-networkd</link> is disabled. - This mirrors the behaviour of systemd - It's udev that parses <literal>.link</literal> files, - not <command>systemd-networkd</command>. - </para> - </listitem> - <listitem> - <para> - <package>mongodb</package> has been updated to version <literal>3.4.24</literal>. - <warning> - <para> - Please note that <package>mongodb</package> has been relicensed under their own - <link xlink:href="https://www.mongodb.com/licensing/server-side-public-license/faq"><literal> - sspl</literal></link>-license. Since it's not entirely free and not OSI-approved, - it's listed as non-free. This means that Hydra doesn't provide prebuilt - <package>mongodb</package>-packages and needs to be built locally. - </para> - </warning> - </para> - </listitem> - </itemizedlist> - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-2009.section.md b/nixos/doc/manual/release-notes/rl-2009.section.md new file mode 100644 index 00000000000..48059ab07f5 --- /dev/null +++ b/nixos/doc/manual/release-notes/rl-2009.section.md @@ -0,0 +1,745 @@ +# Release 20.09 ("Nightingale", 2020.10/27) {#sec-release-20.09} + +Support is planned until the end of June 2021, handing over to 21.05. (Plans [ have shifted](https://github.com/NixOS/rfcs/blob/master/rfcs/0080-nixos-release-schedule.md#core-changes) by two months since release of 20.09.) + +## Highlights {#sec-release-20.09-highlights} + +In addition to 7349 new, 14442 updated, and 8181 removed packages, this release has the following highlights: + +- Core version changes: + + - gcc: 9.2.0 -\> 9.3.0 + + - glibc: 2.30 -\> 2.31 + + - linux: still defaults to 5.4.x, all supported kernels available + + - mesa: 19.3.5 -\> 20.1.7 + +- Desktop Environments: + + - plasma5: 5.17.5 -\> 5.18.5 + + - kdeApplications: 19.12.3 -\> 20.08.1 + + - gnome3: 3.34 -\> 3.36, see its [release notes](https://help.gnome.org/misc/release-notes/3.36/) + + - cinnamon: added at 4.6 + + - NixOS now distributes an official [GNOME ISO](https://nixos.org/download.html#nixos-iso) + +- Programming Languages and Frameworks: + + - Agda ecosystem was heavily reworked (see more details below) + + - PHP now defaults to PHP 7.4, updated from 7.3 + + - PHP 7.2 is no longer supported due to upstream not supporting this version for the entire lifecycle of the 20.09 release + + - Python 3 now defaults to Python 3.8 instead of 3.7 + + - Python 3.5 reached its upstream EOL at the end of September 2020: it has been removed from the list of available packages + +- Databases and Service Monitoring: + + - MariaDB has been updated to 10.4, MariaDB Galera to 26.4. Please read the related upgrade instructions under [backwards incompatibilities](#sec-release-20.09-incompatibilities) before upgrading. + + - Zabbix now defaults to 5.0, updated from 4.4. Please read related sections under [backwards compatibilities](#sec-release-20.09-incompatibilities) before upgrading. + +- Major module changes: + + - Quickly configure a complete, private, self-hosted video conferencing solution with the new Jitsi Meet module. + + - Two new options, [authorizedKeysCommand](options.html#opt-services.openssh.authorizedKeysCommand) and [authorizedKeysCommandUser](options.html#opt-services.openssh.authorizedKeysCommandUser), have been added to the `openssh` module. If you have `AuthorizedKeysCommand` in your [services.openssh.extraConfig](options.html#opt-services.openssh.extraConfig) you should make use of these new options instead. + + - There is a new module for Podman (`virtualisation.podman`), a drop-in replacement for the Docker command line. + + - The new `virtualisation.containers` module manages configuration shared by the CRI-O and Podman modules. + + - Declarative Docker containers are renamed from `docker-containers` to `virtualisation.oci-containers.containers`. This is to make it possible to use `podman` instead of `docker`. + + - The new option [documentation.man.generateCaches](options.html#opt-documentation.man.generateCaches) has been added to automatically generate the `man-db` caches, which are needed by utilities like `whatis` and `apropos`. The caches are generated during the build of the NixOS configuration: since this can be expensive when a large number of packages are installed, the feature is disabled by default. + + - `services.postfix.sslCACert` was replaced by `services.postfix.tlsTrustedAuthorities` which now defaults to system certificate authorities. + + - The various documented workarounds to use steam have been converted to a module. `programs.steam.enable` enables steam, controller support and the workarounds. + + - Support for built-in LCDs in various pieces of Logitech hardware (keyboards and USB speakers). `hardware.logitech.lcd.enable` enables support for all hardware supported by the [g15daemon project](https://sourceforge.net/projects/g15daemon/). + + - The GRUB module gained support for basic password protection, which allows to restrict non-default entries in the boot menu to one or more users. The users and passwords are defined via the option `boot.loader.grub.users`. Note: Password support is only available in GRUB version 2. + +- NixOS module changes: + + - The NixOS module system now supports freeform modules as a mix between `types.attrsOf` and `types.submodule`. These allow you to explicitly declare a subset of options while still permitting definitions without an associated option. See [](#sec-freeform-modules) for how to use them. + + - Following its deprecation in 20.03, the Perl NixOS test driver has been removed. All remaining tests have been ported to the Python test framework. Code outside nixpkgs using `make-test.nix` or `testing.nix` needs to be ported to `make-test-python.nix` and `testing-python.nix` respectively. + + - Subordinate GID and UID mappings are now set up automatically for all normal users. This will make container tools like Podman work as non-root users out of the box. + +- Starting with this release, the hydra-build-result `nixos-YY.MM` branches no longer exist in the [deprecated nixpkgs-channels repository](https://github.com/nixos/nixpkgs-channels). These branches are now in [the main nixpkgs repository](https://github.com/nixos/nixpkgs). + +## New Services {#sec-release-20.09-new-services} + +In addition to 1119 new, 118 updated, and 476 removed options; 61 new modules were added since the last release: + +- Hardware: + + - [hardware.system76.firmware-daemon.enable](options.html#opt-hardware.system76.firmware-daemon.enable) adds easy support of system76 firmware + + - [hardware.uinput.enable](options.html#opt-hardware.uinput.enable) loads uinput kernel module + + - [hardware.video.hidpi.enable](options.html#opt-hardware.video.hidpi.enable) enable good defaults for HiDPI displays + + - [hardware.wooting.enable](options.html#opt-hardware.wooting.enable) support for Wooting keyboards + + - [hardware.xpadneo.enable](options.html#opt-hardware.xpadneo.enable) xpadneo driver for Xbox One wireless controllers + +- Programs: + + - [programs.hamster.enable](options.html#opt-programs.hamster.enable) enable hamster time tracking + + - [programs.steam.enable](options.html#opt-programs.steam.enable) adds easy enablement of steam and related system configuration + +- Security: + + - [security.doas.enable](options.html#opt-security.doas.enable) alternative to sudo, allows non-root users to execute commands as root + + - [security.tpm2.enable](options.html#opt-security.tpm2.enable) add Trusted Platform Module 2 support + +- System: + + - [boot.initrd.network.openvpn.enable](options.html#opt-boot.initrd.network.openvpn.enable) start an OpenVPN client during initrd boot + +- Virtualization: + + - [boot.enableContainers](options.html#opt-boot.enableContainers) use nixos-containers + + - [virtualisation.oci-containers.containers](options.html#opt-virtualisation.oci-containers.containers) run OCI (Docker) containers + + - [virtualisation.podman.enable](options.html#opt-virtualisation.podman.enable) daemonless container engine + +- Services: + + - [services.ankisyncd.enable](options.html#opt-services.ankisyncd.enable) Anki sync server + + - [services.bazarr.enable](options.html#opt-services.bazarr.enable) Subtitle manager for Sonarr and Radarr + + - [services.biboumi.enable](options.html#opt-services.biboumi.enable) Biboumi XMPP gateway to IRC + + - [services.blockbook-frontend](options.html#opt-services.blockbook-frontend) Blockbook-frontend, a service for the Trezor wallet + + - [services.cage.enable](options.html#opt-services.cage.enable) Wayland cage service + + - [services.convos.enable](options.html#opt-services.convos.enable) IRC daemon, which can be accessed throught the browser + + - [services.engelsystem.enable](options.html#opt-services.engelsystem.enable) Tool for coordinating volunteers and shifts on large events + + - [services.espanso.enable](options.html#opt-services.espanso.enable) text-expander written in rust + + - [services.foldingathome.enable](options.html#opt-services.foldingathome.enable) Folding\@home client + + - [services.gerrit.enable](options.html#opt-services.gerrit.enable) Web-based team code collaboration tool + + - [services.go-neb.enable](options.html#opt-services.go-neb.enable) Matrix bot + + - [services.hardware.xow.enable](options.html#opt-services.hardware.xow.enable) xow as a systemd service + + - [services.hercules-ci-agent.enable](options.html#opt-services.hercules-ci-agent.enable) Hercules CI build agent + + - [services.jicofo.enable](options.html#opt-services.jicofo.enable) Jitsi Conference Focus, component of Jitsi Meet + + - [services.jirafeau.enable](options.html#opt-services.jirafeau.enable) A web file repository + + - [services.jitsi-meet.enable](options.html#opt-services.jitsi-meet.enable) Secure, simple and scalable video conferences + + - [services.jitsi-videobridge.enable](options.html#opt-services.jitsi-videobridge.enable) Jitsi Videobridge, a WebRTC compatible router + + - [services.jupyterhub.enable](options.html#opt-services.jupyterhub.enable) Jupyterhub development server + + - [services.k3s.enable](options.html#opt-services.k3s.enable) Lightweight Kubernetes distribution + + - [services.magic-wormhole-mailbox-server.enable](options.html#opt-services.magic-wormhole-mailbox-server.enable) Magic Wormhole Mailbox Server + + - [services.malcontent.enable](options.html#opt-services.malcontent.enable) Parental Control support + + - [services.matrix-appservice-discord.enable](options.html#opt-services.matrix-appservice-discord.enable) Matrix and Discord bridge + + - [services.mautrix-telegram.enable](options.html#opt-services.mautrix-telegram.enable) Matrix-Telegram puppeting/relaybot bridge + + - [services.mirakurun.enable](options.html#opt-services.mirakurun.enable) Japanese DTV Tuner Server Service + + - [services.molly-brown.enable](options.html#opt-services.molly-brown.enable) Molly-Brown Gemini server + + - [services.mullvad-vpn.enable](options.html#opt-services.mullvad-vpn.enable) Mullvad VPN daemon + + - [services.ncdns.enable](options.html#opt-services.ncdns.enable) Namecoin to DNS bridge + + - [services.nextdns.enable](options.html#opt-services.nextdns.enable) NextDNS to DoH Proxy service + + - [services.nix-store-gcs-proxy](options.html#opt-services.nix-store-gcs-proxy) Google storage bucket to be used as a nix store + + - [services.onedrive.enable](options.html#opt-services.onedrive.enable) OneDrive sync service + + - [services.pinnwand.enable](options.html#opt-services.pinnwand.enable) Pastebin-like service + + - [services.pixiecore.enable](options.html#opt-services.pixiecore.enable) Manage network booting of machines + + - [services.privacyidea.enable](options.html#opt-services.privacyidea.enable) Privacy authentication server + + - [services.quorum.enable](options.html#opt-services.quorum.enable) Quorum blockchain daemon + + - [services.robustirc-bridge.enable](options.html#opt-services.robustirc-bridge.enable) RobustIRC bridge + + - [services.rss-bridge.enable](options.html#opt-services.rss-bridge.enable) Generate RSS and Atom feeds + + - [services.rtorrent.enable](options.html#opt-services.rtorrent.enable) rTorrent service + + - [services.smartdns.enable](options.html#opt-services.smartdns.enable) SmartDNS DNS server + + - [services.sogo.enable](options.html#opt-services.sogo.enable) SOGo groupware + + - [services.teeworlds.enable](options.html#opt-services.teeworlds.enable) Teeworlds game server + + - [services.torque.mom.enable](options.html#opt-services.torque.mom.enable) torque computing node + + - [services.torque.server.enable](options.html#opt-services.torque.server.enable) torque server + + - [services.tuptime.enable](options.html#opt-services.tuptime.enable) A total uptime service + + - [services.urserver.enable](options.html#opt-services.urserver.enable) X11 remote server + + - [services.wasabibackend.enable](options.html#opt-services.wasabibackend.enable) Wasabi backend service + + - [services.yubikey-agent.enable](options.html#opt-services.yubikey-agent.enable) Yubikey agent + + - [services.zigbee2mqtt.enable](options.html#opt-services.zigbee2mqtt.enable) Zigbee to MQTT bridge + +## Backward Incompatibilities {#sec-release-20.09-incompatibilities} + +When upgrading from a previous release, please be aware of the following incompatible changes: + +- MariaDB has been updated to 10.4, MariaDB Galera to 26.4. Before you upgrade, it would be best to take a backup of your database. For MariaDB Galera Cluster, see [Upgrading from MariaDB 10.3 to MariaDB 10.4 with Galera Cluster](https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104-with-galera-cluster/) instead. Before doing the upgrade read [Incompatible Changes Between 10.3 and 10.4](https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104/#incompatible-changes-between-103-and-104). After the upgrade you will need to run `mysql_upgrade`. MariaDB 10.4 introduces a number of changes to the authentication process, intended to make things easier and more intuitive. See [Authentication from MariaDB 10.4](https://mariadb.com/kb/en/authentication-from-mariadb-104/). unix_socket auth plugin does not use a password, and uses the connecting user\'s UID instead. When a new MariaDB data directory is initialized, two MariaDB users are created and can be used with new unix_socket auth plugin, as well as traditional mysql_native_password plugin: root\@localhost and mysql\@localhost. To actually use the traditional mysql_native_password plugin method, one must run the following: + + ```nix + { + services.mysql.initialScript = pkgs.writeText "mariadb-init.sql" '' + ALTER USER root@localhost IDENTIFIED VIA mysql_native_password USING PASSWORD("verysecret"); + ''; + } + ``` + + When MariaDB data directory is just upgraded (not initialized), the users are not created or modified. + +- MySQL server is now started with additional systemd sandbox/hardening options for better security. The PrivateTmp, ProtectHome, and ProtectSystem options may be problematic when MySQL is attempting to read from or write to your filesystem anywhere outside of its own state directory, for example when calling `LOAD DATA INFILE or SELECT * INTO OUTFILE`. In this scenario a variant of the following may be required: - allow MySQL to read from /home and /tmp directories when using `LOAD DATA INFILE` + + ```nix + { + systemd.services.mysql.serviceConfig.ProtectHome = lib.mkForce "read-only"; + } + ``` + + \- allow MySQL to write to custom folder `/var/data` when using `SELECT * INTO OUTFILE`, assuming the mysql user has write access to `/var/data` + + ```nix + { + systemd.services.mysql.serviceConfig.ReadWritePaths = [ "/var/data" ]; + } + ``` + + The MySQL service no longer runs its `systemd` service startup script as `root` anymore. A dedicated non `root` super user account is required for operation. This means users with an existing MySQL or MariaDB database server are required to run the following SQL statements as a super admin user before upgrading: + + ```SQL + CREATE USER IF NOT EXISTS 'mysql'@'localhost' identified with unix_socket; + GRANT ALL PRIVILEGES ON *.* TO 'mysql'@'localhost' WITH GRANT OPTION; + ``` + + If you use MySQL instead of MariaDB please replace `unix_socket` with `auth_socket`. If you have changed the value of [services.mysql.user](options.html#opt-services.mysql.user) from the default of `mysql` to a different user please change `'mysql'@'localhost'` to the corresponding user instead. + +- Zabbix now defaults to 5.0, updated from 4.4. Please carefully read through [the upgrade guide](https://www.zabbix.com/documentation/current/manual/installation/upgrade/sources) and apply any changes required. Be sure to take special note of the section on [enabling extended range of numeric (float) values](https://www.zabbix.com/documentation/current/manual/installation/upgrade_notes_500#enabling_extended_range_of_numeric_float_values) as you will need to apply this database migration manually. + + If you are using Zabbix Server with a MySQL or MariaDB database you should note that using a character set of `utf8` and a collate of `utf8_bin` has become mandatory with this release. See the upstream [issue](https://support.zabbix.com/browse/ZBX-17357) for further discussion. Before upgrading you should check the character set and collation used by your database and ensure they are correct: + + ```SQL + SELECT + default_character_set_name, + default_collation_name + FROM + information_schema.schemata + WHERE + schema_name = 'zabbix'; + ``` + + If these values are not correct you should take a backup of your database and convert the character set and collation as required. Here is an [example](https://www.zabbix.com/forum/zabbix-help/396573-reinstall-after-upgrade?p=396891#post396891) of how to do so, taken from the Zabbix forums: + + ```SQL + ALTER DATABASE `zabbix` DEFAULT CHARACTER SET utf8 COLLATE utf8_bin; + + -- the following will produce a list of SQL commands you should subsequently execute + SELECT CONCAT("ALTER TABLE ", TABLE_NAME," CONVERT TO CHARACTER SET utf8 COLLATE utf8_bin;") AS ExecuteTheString + FROM information_schema.`COLUMNS` + WHERE table_schema = "zabbix" AND COLLATION_NAME = "utf8_general_ci"; + ``` + +- maxx package removed along with `services.xserver.desktopManager.maxx` module. Please migrate to cdesktopenv and `services.xserver.desktopManager.cde` module. + +- The [matrix-synapse](options.html#opt-services.matrix-synapse.enable) module no longer includes optional dependencies by default, they have to be added through the [plugins](options.html#opt-services.matrix-synapse.plugins) option. + +- `buildGoModule` now internally creates a vendor directory in the source tree for downloaded modules instead of using go\'s [module proxy protocol](https://golang.org/cmd/go/#hdr-Module_proxy_protocol). This storage format is simpler and therefore less likely to break with future versions of go. As a result `buildGoModule` switched from `modSha256` to the `vendorSha256` attribute to pin fetched version data. + +- Grafana is now built without support for phantomjs by default. Phantomjs support has been [deprecated in Grafana](https://grafana.com/docs/grafana/latest/guides/whats-new-in-v6-4/) and the phantomjs project is [currently unmaintained](https://github.com/ariya/phantomjs/issues/15344#issue-302015362). It can still be enabled by providing `phantomJsSupport = true` to the package instantiation: + + ```nix + { + services.grafana.package = pkgs.grafana.overrideAttrs (oldAttrs: rec { + phantomJsSupport = true; + }); + } + ``` + +- The [supybot](options.html#opt-services.supybot.enable) module now uses `/var/lib/supybot` as its default [stateDir](options.html#opt-services.supybot.stateDir) path if `stateVersion` is 20.09 or higher. It also enables a number of [systemd sandboxing options](https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Sandboxing) which may possibly interfere with some plugins. If this is the case you can disable the options through attributes in `systemd.services.supybot.serviceConfig`. + +- The `security.duosec.skey` option, which stored a secret in the nix store, has been replaced by a new [security.duosec.secretKeyFile](options.html#opt-security.duosec.secretKeyFile) option for better security. + + `security.duosec.ikey` has been renamed to [security.duosec.integrationKey](options.html#opt-security.duosec.integrationKey). + +- `vmware` has been removed from the `services.x11.videoDrivers` defaults. For VMWare guests set `virtualisation.vmware.guest.enable` to `true` which will include the appropriate drivers. + +- The initrd SSH support now uses OpenSSH rather than Dropbear to allow the use of Ed25519 keys and other OpenSSH-specific functionality. Host keys must now be in the OpenSSH format, and at least one pre-generated key must be specified. + + If you used the `boot.initrd.network.ssh.host*Key` options, you\'ll get an error explaining how to convert your host keys and migrate to the new `boot.initrd.network.ssh.hostKeys` option. Otherwise, if you don\'t have any host keys set, you\'ll need to generate some; see the `hostKeys` option documentation for instructions. + +- Since this release there\'s an easy way to customize your PHP install to get a much smaller base PHP with only wanted extensions enabled. See the following snippet installing a smaller PHP with the extensions `imagick`, `opcache`, `pdo` and `pdo_mysql` loaded: + + ```nix + { + environment.systemPackages = [ + (pkgs.php.withExtensions + ({ all, ... }: with all; [ + imagick + opcache + pdo + pdo_mysql + ]) + ) + ]; + } + ``` + + The default `php` attribute hasn\'t lost any extensions. The `opcache` extension has been added. All upstream PHP extensions are available under php.extensions.\<name?\>. + + All PHP `config` flags have been removed for the following reasons: + +- The updated `php` attribute is now easily customizable to your liking by using `php.withExtensions` or `php.buildEnv` instead of writing config files or changing configure flags. + +- The remaining configuration flags can now be set directly on the `php` attribute. For example, instead of + + ```nix + { + php.override { + config.php.embed = true; + config.php.apxs2 = false; + } + } + ``` + + you should now write + + ```nix + { + php.override { + embedSupport = true; + apxs2Support = false; + } + } + ``` + +- The ACME module has been overhauled for simplicity and maintainability. Cert generation now implicitly uses the `acme` user, and the `security.acme.certs._name_.user` option has been removed. Instead, certificate access from other services is now managed through group permissions. The module no longer runs lego twice under certain conditions, and will correctly renew certificates if their configuration is changed. Services which reload nginx and httpd after certificate renewal are now properly configured too so you no longer have to do this manually if you are using HTTPS enabled virtual hosts. A mechanism for regenerating certs on demand has also been added and documented. + +- Gollum received a major update to version 5.x and you may have to change some links in your wiki when migrating from gollum 4.x. More information can be found [here](https://github.com/gollum/gollum/wiki/5.0-release-notes#migrating-your-wiki). + +- Deluge 2.x was added and is used as default for new NixOS installations where stateVersion is \>= 20.09. If you are upgrading from a previous NixOS version, you can set `service.deluge.package = pkgs.deluge-2_x` to upgrade to Deluge 2.x and migrate the state to the new format. Be aware that backwards state migrations are not supported by Deluge. + +- Nginx web server now starting with additional sandbox/hardening options. By default, write access to `/var/log/nginx` and `/var/cache/nginx` is allowed. To allow writing to other folders, use `systemd.services.nginx.serviceConfig.ReadWritePaths` + + ```nix + { + systemd.services.nginx.serviceConfig.ReadWritePaths = [ "/var/www" ]; + } + ``` + + Nginx is also started with the systemd option `ProtectHome = mkDefault true;` which forbids it to read anything from `/home`, `/root` and `/run/user` (see [ProtectHome docs](https://www.freedesktop.org/software/systemd/man/systemd.exec.html#ProtectHome=) for details). If you require serving files from home directories, you may choose to set e.g. + + ```nix + { + systemd.services.nginx.serviceConfig.ProtectHome = "read-only"; + } + ``` + +- The NixOS options `nesting.clone` and `nesting.children` have been deleted, and replaced with named [specialisation](options.html#opt-specialisation) configurations. + + Replace a `nesting.clone` entry with: + + ```nix + { + specialisation.example-sub-configuration = { + configuration = { + ... + }; + }; + ``` + + Replace a `nesting.children` entry with: + + ```nix + { + specialisation.example-sub-configuration = { + inheritParentConfig = false; + configuration = { + ... + }; + }; + ``` + + To switch to a specialised configuration at runtime you need to run: + + ```ShellSession + $ sudo /run/current-system/specialisation/example-sub-configuration/bin/switch-to-configuration test + ``` + + Before you would have used: + + ```ShellSession + $ sudo /run/current-system/fine-tune/child-1/bin/switch-to-configuration test + ``` + +- The Nginx log directory has been moved to `/var/log/nginx`, the cache directory to `/var/cache/nginx`. The option `services.nginx.stateDir` has been removed. + +- The httpd web server previously started its main process as root privileged, then ran worker processes as a less privileged identity user. This was changed to start all of httpd as a less privileged user (defined by [services.httpd.user](options.html#opt-services.httpd.user) and [services.httpd.group](options.html#opt-services.httpd.group)). As a consequence, all files that are needed for httpd to run (included configuration fragments, SSL certificates and keys, etc.) must now be readable by this less privileged user/group. + + The default value for [services.httpd.mpm](options.html#opt-services.httpd.mpm) has been changed from `prefork` to `event`. Along with this change the default value for [services.httpd.virtualHosts.\<name\>.http2](options.html#opt-services.httpd.virtualHosts) has been set to `true`. + +- The `systemd-networkd` option `systemd.network.networks.<name>.dhcp.CriticalConnection` has been removed following upstream systemd\'s deprecation of the same. It is recommended to use `systemd.network.networks.<name>.networkConfig.KeepConfiguration` instead. See systemd.network 5 for details. + +- The `systemd-networkd` option `systemd.network.networks._name_.dhcpConfig` has been renamed to [systemd.network.networks._name_.dhcpV4Config](options.html#opt-systemd.network.networks._name_.dhcpV4Config) following upstream systemd\'s documentation change. See systemd.network 5 for details. + +- In the `picom` module, several options that accepted floating point numbers encoded as strings (for example [services.picom.activeOpacity](options.html#opt-services.picom.activeOpacity)) have been changed to the (relatively) new native `float` type. To migrate your configuration simply remove the quotes around the numbers. + +- When using `buildBazelPackage` from Nixpkgs, `flat` hash mode is now used for dependencies instead of `recursive`. This is to better allow using hashed mirrors where needed. As a result, these hashes will have changed. + +- The syntax of the PostgreSQL configuration file is now checked at build time. If your configuration includes a file inaccessible inside the build sandbox, set `services.postgresql.checkConfig` to `false`. + +- The rkt module has been removed, it was archived by upstream. + +- The [Bazaar](https://bazaar.canonical.com) VCS is unmaintained and, as consequence of the Python 2 EOL, the packages `bazaar` and `bazaarTools` were removed. Breezy, the backward compatible fork of Bazaar (see the [announcement](https://www.jelmer.uk/breezy-intro.html)), was packaged as `breezy` and can be used instead. + + Regarding Nixpkgs, `fetchbzr`, `nix-prefetch-bzr` and Bazaar support in Hydra will continue to work through Breezy. + +- In addition to the hostname, the fully qualified domain name (FQDN), which consists of `${networking.hostName}` and `${networking.domain}` is now added to `/etc/hosts`, to allow local FQDN resolution, as used by the `hostname --fqdn` command and other applications that try to determine the FQDN. These new entries take precedence over entries from the DNS which could cause regressions in some very specific setups. Additionally the hostname is now resolved to `127.0.0.2` instead of `127.0.1.1` to be consistent with what `nss-myhostname` (from systemd) returns. The old behaviour can e.g. be restored by using `networking.hosts = lib.mkForce { "127.0.1.1" = [ config.networking.hostName ]; };`. + +- The hostname (`networking.hostName`) must now be a valid DNS label (see RFC 1035, RFC 1123) and as such must not contain the domain part. This means that the hostname must start with a letter or digit, end with a letter or digit, and have as interior characters only letters, digits, and hyphen. The maximum length is 63 characters. Additionally it is recommended to only use lower-case characters. If (e.g. for legacy reasons) a FQDN is required as the Linux kernel network node hostname (`uname --nodename`) the option `boot.kernel.sysctl."kernel.hostname"` can be used as a workaround (but be aware of the 64 character limit). + +- The GRUB specific option `boot.loader.grub.extraInitrd` has been replaced with the generic option `boot.initrd.secrets`. This option creates a secondary initrd from the specified files, rather than using a manually created initrd file. Due to an existing bug with `boot.loader.grub.extraInitrd`, it is not possible to directly boot an older generation that used that option. It is still possible to rollback to that generation if the required initrd file has not been deleted. + +- The [DNSChain](https://github.com/okTurtles/dnschain) package and NixOS module have been removed from Nixpkgs as the software is unmaintained and can\'t be built. For more information see issue [\#89205](https://github.com/NixOS/nixpkgs/issues/89205). + +- In the `resilio` module, [services.resilio.httpListenAddr](options.html#opt-services.resilio.httpListenAddr) has been changed to listen to `[::1]` instead of `0.0.0.0`. + +- `sslh` has been updated to version `1.21`. The `ssl` probe must be renamed to `tls` in [services.sslh.appendConfig](options.html#opt-services.sslh.appendConfig). + +- Users of [OpenAFS 1.6](http://openafs.org) must upgrade their services to OpenAFS 1.8! In this release, the OpenAFS package version 1.6.24 is marked broken but can be used during transition to OpenAFS 1.8.x. Use the options `services.openafsClient.packages.module`, `services.openafsClient.packages.programs` and `services.openafsServer.package` to select a different OpenAFS package. OpenAFS 1.6 will be removed in the next release. The package `openafs` and the service options will then silently point to the OpenAFS 1.8 release. + + See also the OpenAFS [Administrator Guide](http://docs.openafs.org/AdminGuide/index.html) for instructions. Beware of the following when updating servers: + + - The storage format of the server key has changed and the key must be converted before running the new release. + + - When updating multiple database servers, turn off the database servers from the highest IP down to the lowest with resting periods in between. Start up in reverse order. Do not concurrently run database servers working with different OpenAFS releases! + + - Update servers first, then clients. + +- Radicale\'s default package has changed from 2.x to 3.x. An upgrade checklist can be found [here](https://github.com/Kozea/Radicale/blob/3.0.x/NEWS.md#upgrade-checklist). You can use the newer version in the NixOS service by setting the `package` to `radicale3`, which is done automatically if `stateVersion` is 20.09 or higher. + +- `udpt` experienced a complete rewrite from C++ to rust. The configuration format changed from ini to toml. The new configuration documentation can be found at [the official website](https://naim94a.github.io/udpt/config.html) and example configuration is packaged in `${udpt}/share/udpt/udpt.toml`. + +- We now have a unified [services.xserver.displayManager.autoLogin](options.html#opt-services.xserver.displayManager.autoLogin) option interface to be used for every display-manager in NixOS. + +- The `bitcoind` module has changed to multi-instance, using submodules. Therefore, it is now mandatory to name each instance. To use this new multi-instance config with an existing bitcoind data directory and user, you have to adjust the original config, e.g.: + + ```nix + { + services.bitcoind = { + enable = true; + extraConfig = "..."; + ... + }; + } + ``` + + To something similar: + + ```nix + { + services.bitcoind.mainnet = { + enable = true; + dataDir = "/var/lib/bitcoind"; + user = "bitcoin"; + extraConfig = "..."; + ... + }; + } + ``` + + The key settings are: + + - `dataDir` - to continue using the same data directory. + + - `user` - to continue using the same user so that bitcoind maintains access to its files. + +- Graylog introduced a change in the LDAP server certificate validation behaviour for version 3.3.3 which might break existing setups. When updating Graylog from a version before 3.3.3 make sure to check the Graylog [release info](https://www.graylog.org/post/announcing-graylog-v3-3-3) for information on how to avoid the issue. + +- The `dokuwiki` module has changed to multi-instance, using submodules. Therefore, it is now mandatory to name each instance. Moreover, forcing SSL by default has been dropped, so `nginx.forceSSL` and `nginx.enableACME` are no longer set to `true`. To continue using your service with the original SSL settings, you have to adjust the original config, e.g.: + + ```nix + { + services.dokuwiki = { + enable = true; + ... + }; + } + ``` + + To something similar: + + ```nix + { + services.dokuwiki."mywiki" = { + enable = true; + nginx = { + forceSSL = true; + enableACME = true; + }; + ... + }; + } + ``` + + The base package has also been upgraded to the 2020-07-29 \"Hogfather\" release. Plugins might be incompatible or require upgrading. + +- The [services.postgresql.dataDir](options.html#opt-services.postgresql.dataDir) option is now set to `"/var/lib/postgresql/${cfg.package.psqlSchema}"` regardless of your [system.stateVersion](options.html#opt-system.stateVersion). Users with an existing postgresql install that have a [system.stateVersion](options.html#opt-system.stateVersion) of `17.03` or below should double check what the value of their [services.postgresql.dataDir](options.html#opt-services.postgresql.dataDir) option is (`/var/db/postgresql`) and then explicitly set this value to maintain compatibility: + + ```nix + { + services.postgresql.dataDir = "/var/db/postgresql"; + } + ``` + + The postgresql module now expects there to be a database super user account called `postgres` regardless of your [system.stateVersion](options.html#opt-system.stateVersion). Users with an existing postgresql install that have a [system.stateVersion](options.html#opt-system.stateVersion) of `17.03` or below should run the following SQL statements as a database super admin user before upgrading: + + ```SQL + CREATE ROLE postgres LOGIN SUPERUSER; + ``` + +- The USBGuard module now removes options and instead hardcodes values for `IPCAccessControlFiles`, `ruleFiles`, and `auditFilePath`. Audit logs can be found in the journal. + +- The NixOS module system now evaluates option definitions more strictly, allowing it to detect a larger set of problems. As a result, what previously evaluated may not do so anymore. See [the PR that changed this](https://github.com/NixOS/nixpkgs/pull/82743#issuecomment-674520472) for more info. + +- For NixOS configuration options, the type `loaOf`, after its initial deprecation in release 20.03, has been removed. In NixOS and Nixpkgs options using this type have been converted to `attrsOf`. For more information on this change have look at these links: [issue \#1800](https://github.com/NixOS/nixpkgs/issues/1800), [PR \#63103](https://github.com/NixOS/nixpkgs/pull/63103). + +- `config.systemd.services.${name}.path` now returns a list of paths instead of a colon-separated string. + +- Caddy module now uses Caddy v2 by default. Caddy v1 can still be used by setting [services.caddy.package](options.html#opt-services.caddy.package) to `pkgs.caddy1`. + + New option [services.caddy.adapter](options.html#opt-services.caddy.adapter) has been added. + +- The [jellyfin](options.html#opt-services.jellyfin.enable) module will use and stay on the Jellyfin version `10.5.5` if `stateVersion` is lower than `20.09`. This is because significant changes were made to the database schema, and it is highly recommended to backup your instance before upgrading. After making your backup, you can upgrade to the latest version either by setting your `stateVersion` to `20.09` or higher, or set the `services.jellyfin.package` to `pkgs.jellyfin`. If you do not wish to upgrade Jellyfin, but want to change your `stateVersion`, you can set the value of `services.jellyfin.package` to `pkgs.jellyfin_10_5`. + +- The `security.rngd` service is now disabled by default. This choice was made because there\'s krngd in the linux kernel space making it (for most usecases) functionally redundent. + +- The `hardware.nvidia.optimus_prime.enable` service has been renamed to `hardware.nvidia.prime.sync.enable` and has many new enhancements. Related nvidia prime settings may have also changed. + +- The package nextcloud17 has been removed and nextcloud18 was marked as insecure since both of them will [ will be EOL (end of life) within the lifetime of 20.09](https://docs.nextcloud.com/server/19/admin_manual/release_schedule.html). + + It\'s necessary to upgrade to nextcloud19: + + - From nextcloud17, you have to upgrade to nextcloud18 first as Nextcloud doesn\'t allow going multiple major revisions forward in a single upgrade. This is possible by setting [services.nextcloud.package](options.html#opt-services.nextcloud.package) to nextcloud18. + + - From nextcloud18, it\'s possible to directly upgrade to nextcloud19 by setting [services.nextcloud.package](options.html#opt-services.nextcloud.package) to nextcloud19. + +- The GNOME desktop manager no longer default installs gnome3.epiphany. It was chosen to do this as it has a usability breaking issue (see issue [\#98819](https://github.com/NixOS/nixpkgs/issues/98819)) that makes it unsuitable to be a default app. + + ::: {.note} + Issue [\#98819](https://github.com/NixOS/nixpkgs/issues/98819) is now fixed and gnome3.epiphany is once again installed by default. + ::: + +- If you want to manage the configuration of wpa_supplicant outside of NixOS you must ensure that none of [networking.wireless.networks](options.html#opt-networking.wireless.networks), [networking.wireless.extraConfig](options.html#opt-networking.wireless.extraConfig) or [networking.wireless.userControlled.enable](options.html#opt-networking.wireless.userControlled.enable) is being used or `true`. Using any of those options will cause wpa_supplicant to be started with a NixOS generated configuration file instead of your own. + +## Other Notable Changes {#sec-release-20.09-notable-changes} + +- SD images are now compressed by default using `zstd`. The compression for ISO images has also been changed to `zstd`, but ISO images are still not compressed by default. + +- `services.journald.rateLimitBurst` was updated from `1000` to `10000` to follow the new upstream systemd default. + +- The notmuch package move its emacs-related binaries and emacs lisp files to a separate output. They\'re not part of the default `out` output anymore - if you relied on the `notmuch-emacs-mua` binary or the emacs lisp files, access them via the `notmuch.emacs` output. Device tree overlay support was improved in [\#79370](https://github.com/NixOS/nixpkgs/pull/79370) and now uses [hardware.deviceTree.kernelPackage](options.html#opt-hardware.deviceTree.kernelPackage) instead of `hardware.deviceTree.base`. [hardware.deviceTree.overlays](options.html#opt-hardware.deviceTree.overlays) configuration was extended to support `.dts` files with symbols. Device trees can now be filtered by setting [hardware.deviceTree.filter](options.html#opt-hardware.deviceTree.filter) option. + +- The default output of `buildGoPackage` is now `$out` instead of `$bin`. + +- `buildGoModule` `doCheck` now defaults to `true`. + +- Packages built using `buildRustPackage` now use `release` mode for the `checkPhase` by default. + + Please note that Rust packages utilizing a custom build/install procedure (e.g. by using a `Makefile`) or test suites that rely on the structure of the `target/` directory may break due to those assumptions. For further information, please read the Rust section in the Nixpkgs manual. + +- The cc- and binutils-wrapper\'s \"infix salt\" and `_BUILD_` and `_TARGET_` user infixes have been replaced with with a \"suffix salt\" and suffixes and `_FOR_BUILD` and `_FOR_TARGET`. This matches the autotools convention for env vars which standard for these things, making interfacing with other tools easier. + +- Additional Git documentation (HTML and text files) is now available via the `git-doc` package. + +- Default algorithm for ZRAM swap was changed to `zstd`. + +- The installer now enables sshd by default. This improves installation on headless machines especially ARM single-board-computer. To login through ssh, either a password or an ssh key must be set for the root user or the nixos user. + +- The scripted networking system now uses `.link` files in `/etc/systemd/network` to configure mac address and link MTU, instead of the sometimes buggy `network-link-*` units, which have been removed. Bringing the interface up has been moved to the beginning of the `network-addresses-*` unit. Note this doesn\'t require `systemd-networkd` - it\'s udev that parses `.link` files. Extra care needs to be taken in the presence of [legacy udev rules](https://wiki.debian.org/NetworkInterfaceNames#THE_.22PERSISTENT_NAMES.22_SCHEME) to rename interfaces, as MAC Address and MTU defined in these options can only match on the original link name. In such cases, you most likely want to create a `10-*.link` file through [systemd.network.links](options.html#opt-systemd.network.links) and set both name and MAC Address / MTU there. + +- Grafana received a major update to version 7.x. A plugin is now needed for image rendering support, and plugins must now be signed by default. More information can be found [in the Grafana documentation](https://grafana.com/docs/grafana/latest/installation/upgrading/#upgrading-to-v7-0). + +- The `hardware.u2f` module, which was installing udev rules was removed, as udev gained native support to handle FIDO security tokens. + +- The `services.transmission` module was enhanced with the new options: [services.transmission.credentialsFile](options.html#opt-services.transmission.credentialsFile), [services.transmission.openFirewall](options.html#opt-services.transmission.openFirewall), and [services.transmission.performanceNetParameters](options.html#opt-services.transmission.performanceNetParameters). + + `transmission-daemon` is now started with additional systemd sandbox/hardening options for better security. Please [report](https://github.com/NixOS/nixpkgs/issues) any use case where this is not working well. In particular, the `RootDirectory` option newly set forbids uploading or downloading a torrent outside of the default directory configured at [settings.download-dir](options.html#opt-services.transmission.settings). If you really need Transmission to access other directories, you must include those directories into the `BindPaths` of the service: + + ```nix + { + systemd.services.transmission.serviceConfig.BindPaths = [ "/path/to/alternative/download-dir" ]; + } + ``` + + Also, connection to the RPC (Remote Procedure Call) of `transmission-daemon` is now only available on the local network interface by default. Use: + + ```nix + { + services.transmission.settings.rpc-bind-address = "0.0.0.0"; + } + ``` + + to get the previous behavior of listening on all network interfaces. + +- With this release `systemd-networkd` (when enabled through [networking.useNetworkd](options.html#opt-networking.useNetworkd)) has it\'s netlink socket created through a `systemd.socket` unit. This gives us control over socket buffer sizes and other parameters. For larger setups where networkd has to create a lot of (virtual) devices the default buffer size (currently 128MB) is not enough. + + On a machine with \>100 virtual interfaces (e.g., wireguard tunnels, VLANs, ...), that all have to be brought up during system startup, the receive buffer size will spike for a brief period. Eventually some of the message will be dropped since there is not enough (permitted) buffer space available. + + By having `systemd-networkd` start with a netlink socket created by `systemd` we can configure the `ReceiveBufferSize=` parameter in the socket options (i.e. `systemd.sockets.systemd-networkd.socketOptions.ReceiveBufferSize`) without recompiling `systemd-networkd`. + + Since the actual memory requirements depend on hardware, timing, exact configurations etc. it isn\'t currently possible to infer a good default from within the NixOS module system. Administrators are advised to monitor the logs of `systemd-networkd` for `rtnl: kernel receive buffer overrun` spam and increase the memory limit as they see fit. + + Note: Increasing the `ReceiveBufferSize=` doesn\'t allocate any memory. It just increases the upper bound on the kernel side. The memory allocation depends on the amount of messages that are queued on the kernel side of the netlink socket. + +- Specifying [mailboxes](options.html#opt-services.dovecot2.mailboxes) in the dovecot2 module as a list is deprecated and will break eval in 21.05. Instead, an attribute-set should be specified where the `name` should be the key of the attribute. + + This means that a configuration like this + + ```nix + { + services.dovecot2.mailboxes = [ + { name = "Junk"; + auto = "create"; + } + ]; + } + ``` + + should now look like this: + + ```nix + { + services.dovecot2.mailboxes = { + Junk.auto = "create"; + }; + } + ``` + +- netbeans was upgraded to 12.0 and now defaults to OpenJDK 11. This might cause problems if your projects depend on packages that were removed in Java 11. + +- nextcloud has been updated to [v19](https://nextcloud.com/blog/nextcloud-hub-brings-productivity-to-home-office/). + + If you have an existing installation, please make sure that you\'re on nextcloud18 before upgrading to nextcloud19 since Nextcloud doesn\'t support upgrades across multiple major versions. + +- The `nixos-run-vms` script now deletes the previous run machines states on test startup. You can use the `--keep-vm-state` flag to match the previous behaviour and keep the same VM state between different test runs. + +- The [nix.buildMachines](options.html#opt-nix.buildMachines) option is now type-checked. There are no functional changes, however this may require updating some configurations to use correct types for all attributes. + +- The `fontconfig` module stopped generating config and cache files for fontconfig 2.10.x, the `/etc/fonts/fonts.conf` now belongs to the latest fontconfig, just like on other Linux distributions, and we will [no longer](https://github.com/NixOS/nixpkgs/pull/95358) be versioning the config directories. + + Fontconfig 2.10.x was removed from Nixpkgs since it hasn't been used in any Nixpkgs package for years now. + +- Nginx module `nginxModules.fastcgi-cache-purge` renamed to official name `nginxModules.cache-purge`. Nginx module `nginxModules.ngx_aws_auth` renamed to official name `nginxModules.aws-auth`. + +- The option `defaultPackages` was added. It installs the packages perl, rsync and strace for now. They were added unconditionally to `systemPackages` before, but are not strictly necessary for a minimal NixOS install. You can set it to an empty list to have a more minimal system. Be aware that some functionality might still have an impure dependency on those packages, so things might break. + +- The `undervolt` option no longer needs to apply its settings every 30s. If they still become undone, open an issue and restore the previous behaviour using `undervolt.useTimer`. + +- Agda has been heavily reworked. + + - `agda.mkDerivation` has been heavily changed and is now located at agdaPackages.mkDerivation. + + - New top-level packages agda and `agda.withPackages` have been added, the second of which sets up agda with access to chosen libraries. + + - All agda libraries now live under `agdaPackages`. + + - Many broken libraries have been removed. + + See the [new documentation](https://nixos.org/nixpkgs/manual/#agda) for more information. + +- The `deepin` package set has been removed from nixpkgs. It was a work in progress to package the [Deepin Desktop Environment (DDE)](https://www.deepin.org/en/dde/), including libraries, tools and applications, and it was still missing a service to launch the desktop environment. It has shown to no longer be a feasible goal due to reasons discussed in [issue \#94870](https://github.com/NixOS/nixpkgs/issues/94870). The package `netease-cloud-music` has also been removed, as it depends on libraries from deepin. + +- The `opendkim` module now uses systemd sandboxing features to limit the exposure of the system towards the opendkim service. + +- Kubernetes has been upgraded to 1.19.1, which also means that the golang version to build it has been bumped to 1.15. This may have consequences for your existing clusters and their certificates. Please consider [ the release notes for Kubernetes 1.19 carefully ](https://relnotes.k8s.io/?markdown=93264) before upgrading. + +- For AMD GPUs, Vulkan can now be used by adding `amdvlk` to `hardware.opengl.extraPackages`. + +- Similarly, still for AMD GPUs, the ROCm OpenCL stack can now be used by adding `rocm-opencl-icd` to `hardware.opengl.extraPackages`. + +## Contributions {#sec-release-20.09-contributions} + +I, Jonathan Ringer, would like to thank the following individuals for their work on nixpkgs. This release could not be done without the hard work of the NixOS community. There were 31282 contributions across 1313 contributors. + +1. 2288 Mario Rodas + +2. 1837 Frederik Rietdijk + +3. 946 Jörg Thalheim + +4. 925 Maximilian Bosch + +5. 687 Jonathan Ringer + +6. 651 Jan Tojnar + +7. 622 Daniël de Kok + +8. 605 WORLDofPEACE + +9. 597 Florian Klink + +10. 528 José Romildo Malaquias + +11. 281 volth + +12. 101 Robert Scott + +13. 86 Tim Steinbach + +14. 76 WORLDofPEACE + +15. 49 Maximilian Bosch + +16. 42 Thomas Tuegel + +17. 37 Doron Behar + +18. 36 Vladimír Čunát + +19. 27 Jonathan Ringer + +20. 27 Maciej Krüger + +I, Jonathan Ringer, would also like to personally thank \@WORLDofPEACE for their help in mentoring me on the release process. Special thanks also goes to Thomas Tuegel for helping immensely with stabilizing Qt, KDE, and Plasma5; I would also like to thank Robert Scott for his numerous fixes and pull request reviews. diff --git a/nixos/doc/manual/release-notes/rl-2009.xml b/nixos/doc/manual/release-notes/rl-2009.xml deleted file mode 100644 index 49446afdead..00000000000 --- a/nixos/doc/manual/release-notes/rl-2009.xml +++ /dev/null @@ -1,1838 +0,0 @@ -<section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.09"> - <title>Release 20.09 (“Nightingale”, 2020.10/27)</title> - - <para> - Support is planned until the end of June 2021, handing over to 21.05. - (Plans <link xlink:href="https://github.com/NixOS/rfcs/blob/master/rfcs/0080-nixos-release-schedule.md#core-changes"> - have shifted</link> by two months since release of 20.09.) - </para> - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.09-highlights"> - <title>Highlights</title> - - <para> - In addition to 7349 new, 14442 updated, and 8181 removed packages, this release has the - following highlights: - </para> - - <itemizedlist> - <listitem> - <para> - Core version changes: - </para> - <itemizedlist> - <listitem> - <para> - gcc: 9.2.0 -> 9.3.0 - </para> - </listitem> - <listitem> - <para> - glibc: 2.30 -> 2.31 - </para> - </listitem> - <listitem> - <para> - linux: still defaults to 5.4.x, all supported kernels available - </para> - </listitem> - <listitem> - <para> - mesa: 19.3.5 -> 20.1.7 - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - Desktop Environments: - </para> - <itemizedlist> - <listitem> - <para> - plasma5: 5.17.5 -> 5.18.5 - </para> - </listitem> - <listitem> - <para> - kdeApplications: 19.12.3 -> 20.08.1 - </para> - </listitem> - <listitem> - <para> - gnome3: 3.34 -> 3.36, see its <link xlink:href="https://help.gnome.org/misc/release-notes/3.36/">release notes</link> - </para> - </listitem> - <listitem> - <para> - cinnamon: added at 4.6 - </para> - </listitem> - <listitem> - <para> - NixOS now distributes an official <link xlink:href="https://nixos.org/download.html#nixos-iso">GNOME ISO</link> - </para> - </listitem> - </itemizedlist> - </listitem> - - <listitem> - <para> - Programming Languages and Frameworks: - </para> - <itemizedlist> - - <listitem> - <para> - Agda ecosystem was heavily reworked (see more details below) - </para> - </listitem> - <listitem> - <para> - PHP now defaults to PHP 7.4, updated from 7.3 - </para> - </listitem> - <listitem> - <para> - PHP 7.2 is no longer supported due to upstream not supporting this version for the entire lifecycle of the 20.09 release - </para> - </listitem> - <listitem> - <para> - Python 3 now defaults to Python 3.8 instead of 3.7 - </para> - </listitem> - <listitem> - <para> - Python 3.5 reached its upstream EOL at the end of September 2020: it - has been removed from the list of available packages - </para> - </listitem> - </itemizedlist> - </listitem> - - <listitem> - <para> - Databases and Service Monitoring: - </para> - <itemizedlist> - <listitem> - <para> - MariaDB has been updated to 10.4, MariaDB Galera to 26.4. Please read the related upgrade instructions under <link linkend="sec-release-20.09-incompatibilities">backwards incompatibilities</link> before upgrading. - </para> - </listitem> - <listitem> - <para> - Zabbix now defaults to 5.0, updated from 4.4. Please read related sections under <link linkend="sec-release-20.09-incompatibilities">backwards compatibilities</link> before upgrading. - </para> - </listitem> - </itemizedlist> - </listitem> - - <listitem> - <para> - Major module changes: - </para> - <itemizedlist> - <listitem> - <para> - Quickly configure a complete, private, self-hosted video - conferencing solution with the new Jitsi Meet module. - </para> - </listitem> - <listitem> - <para> - Two new options, <link linkend="opt-services.openssh.authorizedKeysCommand">authorizedKeysCommand</link> - and <link linkend="opt-services.openssh.authorizedKeysCommandUser">authorizedKeysCommandUser</link>, have - been added to the <literal>openssh</literal> module. If you have <literal>AuthorizedKeysCommand</literal> - in your <link linkend="opt-services.openssh.extraConfig">services.openssh.extraConfig</link> you should - make use of these new options instead. - </para> - </listitem> - <listitem> - <para> - There is a new module for Podman (<varname>virtualisation.podman</varname>), a drop-in replacement for the Docker command line. - </para> - </listitem> - <listitem> - <para> - The new <varname>virtualisation.containers</varname> module manages configuration shared by the CRI-O and Podman modules. - </para> - </listitem> - <listitem> - <para> - Declarative Docker containers are renamed from <varname>docker-containers</varname> to <varname>virtualisation.oci-containers.containers</varname>. - This is to make it possible to use <literal>podman</literal> instead of <literal>docker</literal>. - </para> - </listitem> - <listitem> - <para> - The new option <link linkend="opt-documentation.man.generateCaches">documentation.man.generateCaches</link> - has been added to automatically generate the <literal>man-db</literal> caches, which are needed by utilities - like <command>whatis</command> and <command>apropos</command>. The caches are generated during the build of - the NixOS configuration: since this can be expensive when a large number of packages are installed, the - feature is disabled by default. - </para> - </listitem> - <listitem> - <para> - <varname>services.postfix.sslCACert</varname> was replaced by <varname>services.postfix.tlsTrustedAuthorities</varname> which now defaults to system certificate authorities. - </para> - </listitem> - <listitem> - <para> - The various documented workarounds to use steam have been converted to a module. <varname>programs.steam.enable</varname> enables steam, controller support and the workarounds. - </para> - </listitem> - <listitem> - <para> - Support for built-in LCDs in various pieces of Logitech hardware (keyboards and USB speakers). <varname>hardware.logitech.lcd.enable</varname> enables support for all hardware supported by the <link xlink:href="https://sourceforge.net/projects/g15daemon/">g15daemon project</link>. - </para> - </listitem> - <listitem> - <para> - The GRUB module gained support for basic password protection, which - allows to restrict non-default entries in the boot menu to one or more - users. The users and passwords are defined via the option - <option>boot.loader.grub.users</option>. - Note: Password support is only available in GRUB version 2. - </para> - </listitem> - </itemizedlist> - </listitem> - - <listitem> - <para> - NixOS module changes: - </para> - <itemizedlist> - <listitem> - <para> - The NixOS module system now supports freeform modules as a mix between <literal>types.attrsOf</literal> and <literal>types.submodule</literal>. These allow you to explicitly declare a subset of options while still permitting definitions without an associated option. See <xref linkend='sec-freeform-modules'/> for how to use them. - </para> - </listitem> - <listitem> - <para> - Following its deprecation in 20.03, the Perl NixOS test driver has been removed. - All remaining tests have been ported to the Python test framework. - Code outside nixpkgs using <filename>make-test.nix</filename> or - <filename>testing.nix</filename> needs to be ported to - <filename>make-test-python.nix</filename> and - <filename>testing-python.nix</filename> respectively. - </para> - </listitem> - <listitem> - <para> - Subordinate GID and UID mappings are now set up automatically for all normal users. - This will make container tools like Podman work as non-root users out of the box. - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - Starting with this release, the hydra-build-result - <literal>nixos-<replaceable>YY.MM</replaceable></literal> - branches no longer exist in the <link - xlink:href="https://github.com/nixos/nixpkgs-channels">deprecated - nixpkgs-channels repository</link>. These branches are now in - <link xlink:href="https://github.com/nixos/nixpkgs">the main nixpkgs - repository</link>. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.09-new-services"> - <title>New Services</title> - - <para> - In addition to 1119 new, 118 updated, and 476 removed options; 61 new modules were added since the last release: - </para> - - <itemizedlist> - <listitem> - <para> - Hardware: - </para> - <itemizedlist> - <listitem> - <para> - <xref linkend="opt-hardware.system76.firmware-daemon.enable" /> adds easy support of system76 firmware - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-hardware.uinput.enable" /> loads uinput kernel module - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-hardware.video.hidpi.enable" /> enable good defaults for HiDPI displays - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-hardware.wooting.enable" /> support for Wooting keyboards - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-hardware.xpadneo.enable" /> xpadneo driver for Xbox One wireless controllers - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - Programs: - </para> - <itemizedlist> - <listitem> - <para> - <xref linkend="opt-programs.hamster.enable" /> enable hamster time tracking - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-programs.steam.enable" /> adds easy enablement of steam and related system configuration - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - Security: - </para> - <itemizedlist> - <listitem> - <para> - <xref linkend="opt-security.doas.enable" /> alternative to sudo, allows non-root users to execute commands as root - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-security.tpm2.enable" /> add Trusted Platform Module 2 support - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - System: - </para> - <itemizedlist> - <listitem> - <para> - <xref linkend="opt-boot.initrd.network.openvpn.enable" /> start an OpenVPN client during initrd boot - </para> - </listitem> - </itemizedlist> - </listitem> - <listitem> - <para> - Virtualization: - </para> - <itemizedlist> - <listitem> - <para> - <xref linkend="opt-boot.enableContainers" /> use nixos-containers - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-virtualisation.oci-containers.containers" /> run OCI (Docker) containers - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-virtualisation.podman.enable" /> daemonless container engine - </para> - </listitem> - </itemizedlist> - </listitem> - - <listitem> - <para> - Services: - </para> - <itemizedlist> - <listitem> - <para> - <xref linkend="opt-services.ankisyncd.enable" /> Anki sync server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.bazarr.enable" /> Subtitle manager for Sonarr and Radarr - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.biboumi.enable" /> Biboumi XMPP gateway to IRC - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.blockbook-frontend" /> Blockbook-frontend, a service for the Trezor wallet - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.cage.enable" /> Wayland cage service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.convos.enable" /> IRC daemon, which can be accessed throught the browser - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.engelsystem.enable" /> Tool for coordinating volunteers and shifts on large events - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.espanso.enable" /> text-expander written in rust - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.foldingathome.enable" /> Folding@home client - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.gerrit.enable" /> Web-based team code collaboration tool - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.go-neb.enable" /> Matrix bot - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.hardware.xow.enable" /> xow as a systemd service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.hercules-ci-agent.enable" /> Hercules CI build agent - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.jicofo.enable" /> Jitsi Conference Focus, component of Jitsi Meet - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.jirafeau.enable" /> A web file repository - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.jitsi-meet.enable" /> Secure, simple and scalable video conferences - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.jitsi-videobridge.enable" /> Jitsi Videobridge, a WebRTC compatible router - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.jupyterhub.enable" /> Jupyterhub development server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.k3s.enable" /> Lightweight Kubernetes distribution - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.magic-wormhole-mailbox-server.enable" /> Magic Wormhole Mailbox Server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.malcontent.enable" /> Parental Control support - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.matrix-appservice-discord.enable" /> Matrix and Discord bridge - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.mautrix-telegram.enable" /> Matrix-Telegram puppeting/relaybot bridge - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.mirakurun.enable" /> Japanese DTV Tuner Server Service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.molly-brown.enable" /> Molly-Brown Gemini server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.mullvad-vpn.enable" /> Mullvad VPN daemon - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.ncdns.enable" /> Namecoin to DNS bridge - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.nextdns.enable" /> NextDNS to DoH Proxy service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.nix-store-gcs-proxy" /> Google storage bucket to be used as a nix store - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.onedrive.enable" /> OneDrive sync service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.pinnwand.enable" /> Pastebin-like service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.pixiecore.enable" /> Manage network booting of machines - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.privacyidea.enable" /> Privacy authentication server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.quorum.enable" /> Quorum blockchain daemon - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.robustirc-bridge.enable" /> RobustIRC bridge - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.rss-bridge.enable" /> Generate RSS and Atom feeds - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.rtorrent.enable" /> rTorrent service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.smartdns.enable" /> SmartDNS DNS server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.sogo.enable" /> SOGo groupware - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.teeworlds.enable" /> Teeworlds game server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.torque.mom.enable" /> torque computing node - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.torque.server.enable" /> torque server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.tuptime.enable" /> A total uptime service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.urserver.enable" /> X11 remote server - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.wasabibackend.enable" /> Wasabi backend service - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.yubikey-agent.enable" /> Yubikey agent - </para> - </listitem> - <listitem> - <para> - <xref linkend="opt-services.zigbee2mqtt.enable" /> Zigbee to MQTT bridge - </para> - </listitem> - </itemizedlist> - </listitem> - - </itemizedlist> - - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.09-incompatibilities"> - <title>Backward Incompatibilities</title> - - <para> - When upgrading from a previous release, please be aware of the following - incompatible changes: - </para> - - <itemizedlist> - <listitem> - <para> - MariaDB has been updated to 10.4, MariaDB Galera to 26.4. - Before you upgrade, it would be best to take a backup of your database. - For MariaDB Galera Cluster, see <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104-with-galera-cluster/">Upgrading - from MariaDB 10.3 to MariaDB 10.4 with Galera Cluster</link> instead. - Before doing the upgrade read <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104/#incompatible-changes-between-103-and-104">Incompatible - Changes Between 10.3 and 10.4</link>. - After the upgrade you will need to run <literal>mysql_upgrade</literal>. - MariaDB 10.4 introduces a number of changes to the authentication process, intended to make things easier and more - intuitive. See <link xlink:href="https://mariadb.com/kb/en/authentication-from-mariadb-104/">Authentication from MariaDB 10.4</link>. - unix_socket auth plugin does not use a password, and uses the connecting user's UID instead. When a new MariaDB data directory is initialized, two MariaDB users are - created and can be used with new unix_socket auth plugin, as well as traditional mysql_native_password plugin: root@localhost and mysql@localhost. To actually use - the traditional mysql_native_password plugin method, one must run the following: -<programlisting> -services.mysql.initialScript = pkgs.writeText "mariadb-init.sql" '' - ALTER USER root@localhost IDENTIFIED VIA mysql_native_password USING PASSWORD("verysecret"); -''; -</programlisting> - When MariaDB data directory is just upgraded (not initialized), the users are not created or modified. - </para> - </listitem> - <listitem> - <para> - MySQL server is now started with additional systemd sandbox/hardening options for better security. The PrivateTmp, ProtectHome, and ProtectSystem options - may be problematic when MySQL is attempting to read from or write to your filesystem anywhere outside of its own state directory, for example when - calling <literal>LOAD DATA INFILE or SELECT * INTO OUTFILE</literal>. In this scenario a variant of the following may be required: - - allow MySQL to read from /home and /tmp directories when using <literal>LOAD DATA INFILE</literal> -<programlisting> -systemd.services.mysql.serviceConfig.ProtectHome = lib.mkForce "read-only"; -</programlisting> - - allow MySQL to write to custom folder <literal>/var/data</literal> when using <literal>SELECT * INTO OUTFILE</literal>, assuming the mysql user has write - access to <literal>/var/data</literal> -<programlisting> -systemd.services.mysql.serviceConfig.ReadWritePaths = [ "/var/data" ]; -</programlisting> - </para> - <para> - The MySQL service no longer runs its <literal>systemd</literal> service startup script as <literal>root</literal> anymore. A dedicated non <literal>root</literal> - super user account is required for operation. This means users with an existing MySQL or MariaDB database server are required to run the following SQL statements - as a super admin user before upgrading: -<programlisting> -CREATE USER IF NOT EXISTS 'mysql'@'localhost' identified with unix_socket; -GRANT ALL PRIVILEGES ON *.* TO 'mysql'@'localhost' WITH GRANT OPTION; -</programlisting> - If you use MySQL instead of MariaDB please replace <literal>unix_socket</literal> with <literal>auth_socket</literal>. If you have changed the value of <xref linkend="opt-services.mysql.user"/> - from the default of <literal>mysql</literal> to a different user please change <literal>'mysql'@'localhost'</literal> to the corresponding user instead. - </para> - </listitem> - - <listitem> - <para> - Zabbix now defaults to 5.0, updated from 4.4. Please carefully read through - <link xlink:href="https://www.zabbix.com/documentation/current/manual/installation/upgrade/sources">the upgrade guide</link> - and apply any changes required. Be sure to take special note of the section on - <link xlink:href="https://www.zabbix.com/documentation/current/manual/installation/upgrade_notes_500#enabling_extended_range_of_numeric_float_values">enabling extended range of numeric (float) values</link> - as you will need to apply this database migration manually. - </para> - <para> - If you are using Zabbix Server with a MySQL or MariaDB database you should note that using a character set of <literal>utf8</literal> and a collate of <literal>utf8_bin</literal> has become mandatory with - this release. See the upstream <link xlink:href="https://support.zabbix.com/browse/ZBX-17357">issue</link> for further discussion. Before upgrading you should check the character set and collation used by - your database and ensure they are correct: -<programlisting> - SELECT - default_character_set_name, - default_collation_name - FROM - information_schema.schemata - WHERE - schema_name = 'zabbix'; -</programlisting> - If these values are not correct you should take a backup of your database and convert the character set and collation as required. Here is an - <link xlink:href="https://www.zabbix.com/forum/zabbix-help/396573-reinstall-after-upgrade?p=396891#post396891">example</link> of how to do so, taken from - the Zabbix forums: -<programlisting> - ALTER DATABASE `zabbix` DEFAULT CHARACTER SET utf8 COLLATE utf8_bin; - - -- the following will produce a list of SQL commands you should subsequently execute - SELECT CONCAT("ALTER TABLE ", TABLE_NAME," CONVERT TO CHARACTER SET utf8 COLLATE utf8_bin;") AS ExecuteTheString - FROM information_schema.`COLUMNS` - WHERE table_schema = "zabbix" AND COLLATION_NAME = "utf8_general_ci"; -</programlisting> - </para> - </listitem> - - <listitem> - <para> - <package>maxx</package> package removed along with <varname>services.xserver.desktopManager.maxx</varname> module. - Please migrate to <package>cdesktopenv</package> and <varname>services.xserver.desktopManager.cde</varname> module. - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-services.matrix-synapse.enable">matrix-synapse</link> module no longer includes optional dependencies by default, they have to be added through the <link linkend="opt-services.matrix-synapse.plugins">plugins</link> option. - </para> - </listitem> - <listitem> - <para> - <literal>buildGoModule</literal> now internally creates a vendor directory - in the source tree for downloaded modules instead of using go's <link - xlink:href="https://golang.org/cmd/go/#hdr-Module_proxy_protocol">module - proxy protocol</link>. This storage format is simpler and therefore less - likely to break with future versions of go. As a result - <literal>buildGoModule</literal> switched from - <literal>modSha256</literal> to the <literal>vendorSha256</literal> - attribute to pin fetched version data. - </para> - </listitem> - <listitem> - <para> - Grafana is now built without support for phantomjs by default. Phantomjs support has been - <link xlink:href="https://grafana.com/docs/grafana/latest/guides/whats-new-in-v6-4/">deprecated in Grafana</link> - and the <package>phantomjs</package> project is - <link xlink:href="https://github.com/ariya/phantomjs/issues/15344#issue-302015362">currently unmaintained</link>. - It can still be enabled by providing <literal>phantomJsSupport = true</literal> to the package instantiation: -<programlisting>{ - services.grafana.package = pkgs.grafana.overrideAttrs (oldAttrs: rec { - phantomJsSupport = true; - }); -}</programlisting> - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-services.supybot.enable">supybot</link> module now uses <literal>/var/lib/supybot</literal> - as its default <link linkend="opt-services.supybot.stateDir">stateDir</link> path if <literal>stateVersion</literal> - is 20.09 or higher. It also enables a number of - <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Sandboxing">systemd sandboxing options</link> - which may possibly interfere with some plugins. If this is the case you can disable the options through attributes in - <option>systemd.services.supybot.serviceConfig</option>. - </para> - </listitem> - <listitem> - <para> - The <literal>security.duosec.skey</literal> option, which stored a secret in the - nix store, has been replaced by a new - <link linkend="opt-security.duosec.secretKeyFile">security.duosec.secretKeyFile</link> - option for better security. - </para> - <para> - <literal>security.duosec.ikey</literal> has been renamed to - <link linkend="opt-security.duosec.integrationKey">security.duosec.integrationKey</link>. - </para> - </listitem> - <listitem> - <para> - <literal>vmware</literal> has been removed from the <literal>services.x11.videoDrivers</literal> defaults. - For VMWare guests set <literal>virtualisation.vmware.guest.enable</literal> to <literal>true</literal> which will include the appropriate drivers. - </para> - </listitem> - <listitem> - <para> - The initrd SSH support now uses OpenSSH rather than Dropbear to - allow the use of Ed25519 keys and other OpenSSH-specific - functionality. Host keys must now be in the OpenSSH format, and at - least one pre-generated key must be specified. - </para> - <para> - If you used the <option>boot.initrd.network.ssh.host*Key</option> - options, you'll get an error explaining how to convert your host - keys and migrate to the new - <option>boot.initrd.network.ssh.hostKeys</option> option. - Otherwise, if you don't have any host keys set, you'll need to - generate some; see the <option>hostKeys</option> option - documentation for instructions. - </para> - </listitem> - <listitem> - <para> - Since this release there's an easy way to customize your PHP - install to get a much smaller base PHP with only wanted - extensions enabled. See the following snippet installing a - smaller PHP with the extensions <literal>imagick</literal>, - <literal>opcache</literal>, <literal>pdo</literal> and - <literal>pdo_mysql</literal> loaded: - - <programlisting> -environment.systemPackages = [ - (pkgs.php.withExtensions - ({ all, ... }: with all; [ - imagick - opcache - pdo - pdo_mysql - ]) - ) -];</programlisting> - - The default <literal>php</literal> attribute hasn't lost any - extensions. The <literal>opcache</literal> extension has been - added. - - All upstream PHP extensions are available under <package><![CDATA[php.extensions.<name?>]]></package>. - </para> - <para> - All PHP <literal>config</literal> flags have been removed for - the following reasons: - - <itemizedlist> - <listitem> - <para> - The updated <literal>php</literal> attribute is now easily - customizable to your liking by using - <literal>php.withExtensions</literal> or - <literal>php.buildEnv</literal> instead of writing config files - or changing configure flags. - </para> - </listitem> - <listitem> - <para> - The remaining configuration flags can now be set directly on - the <literal>php</literal> attribute. For example, instead of - - <programlisting> -php.override { - config.php.embed = true; - config.php.apxs2 = false; -} - </programlisting> - - you should now write - - <programlisting> -php.override { - embedSupport = true; - apxs2Support = false; -} - </programlisting> - </para> - </listitem> - </itemizedlist> - - </para> - </listitem> - <listitem> - <para> - The ACME module has been overhauled for simplicity and maintainability. - Cert generation now implicitly uses the <literal>acme</literal> - user, and the <literal>security.acme.certs._name_.user</literal> option - has been removed. Instead, certificate access from other services is now - managed through group permissions. The module no longer runs lego - twice under certain conditions, and will correctly renew certificates if - their configuration is changed. Services which reload nginx and httpd after - certificate renewal are now properly configured too so you no longer have - to do this manually if you are using HTTPS enabled virtual hosts. A mechanism - for regenerating certs on demand has also been added and documented. - </para> - </listitem> - <listitem> - <para> - Gollum received a major update to version 5.x and you may have to change - some links in your wiki when migrating from gollum 4.x. More information - can be found - <link xlink:href="https://github.com/gollum/gollum/wiki/5.0-release-notes#migrating-your-wiki">here</link>. - </para> - </listitem> - <listitem> - <para> - Deluge 2.x was added and is used as default for new NixOS - installations where stateVersion is >= 20.09. If you are upgrading from a previous - NixOS version, you can set <literal>service.deluge.package = pkgs.deluge-2_x</literal> - to upgrade to Deluge 2.x and migrate the state to the new format. - Be aware that backwards state migrations are not supported by Deluge. - </para> - </listitem> - <listitem> - <para> - Nginx web server now starting with additional sandbox/hardening options. By default, write access - to <literal>/var/log/nginx</literal> and <literal>/var/cache/nginx</literal> is allowed. To allow writing to other folders, - use <literal>systemd.services.nginx.serviceConfig.ReadWritePaths</literal> - <programlisting> -systemd.services.nginx.serviceConfig.ReadWritePaths = [ "/var/www" ]; - </programlisting> - </para> - <para> - Nginx is also started with the systemd option <literal>ProtectHome = mkDefault true;</literal> - which forbids it to read anything from <literal>/home</literal>, <literal>/root</literal> - and <literal>/run/user</literal> (see - <link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.exec.html#ProtectHome=">ProtectHome docs</link> - for details). - If you require serving files from home directories, you may choose to set e.g. -<programlisting> -systemd.services.nginx.serviceConfig.ProtectHome = "read-only"; -</programlisting> - </para> - </listitem> - <listitem> - <para> - The NixOS options <literal>nesting.clone</literal> and - <literal>nesting.children</literal> have been deleted, and - replaced with named <xref linkend="opt-specialisation"/> - configurations. - </para> - - <para> - Replace a <literal>nesting.clone</literal> entry with: - -<programlisting>{ -<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = { - <link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = { - ... - }; -};</programlisting> - - </para> - <para> - Replace a <literal>nesting.children</literal> entry with: - -<programlisting>{ -<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = { - <link xlink:href="#opt-specialisation._name_.inheritParentConfig">inheritParentConfig</link> = false; - <link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = { - ... - }; -};</programlisting> - </para> - - <para> - To switch to a specialised configuration at runtime you need to - run: -<programlisting> -# sudo /run/current-system/specialisation/example-sub-configuration/bin/switch-to-configuration test -</programlisting> - Before you would have used: -<programlisting> -# sudo /run/current-system/fine-tune/child-1/bin/switch-to-configuration test -</programlisting> - </para> - </listitem> - <listitem> - <para> - The Nginx log directory has been moved to <literal>/var/log/nginx</literal>, the cache directory - to <literal>/var/cache/nginx</literal>. The option <literal>services.nginx.stateDir</literal> has - been removed. - </para> - </listitem> - <listitem> - <para> - The httpd web server previously started its main process as root - privileged, then ran worker processes as a less privileged identity user. - This was changed to start all of httpd as a less privileged user (defined by - <xref linkend="opt-services.httpd.user"/> and - <xref linkend="opt-services.httpd.group"/>). As a consequence, all files that - are needed for httpd to run (included configuration fragments, SSL - certificates and keys, etc.) must now be readable by this less privileged - user/group. - </para> - <para> - The default value for <xref linkend="opt-services.httpd.mpm"/> - has been changed from <literal>prefork</literal> to <literal>event</literal>. Along with - this change the default value for - <link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.<name>.http2</link> - has been set to <literal>true</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>systemd-networkd</literal> option - <literal>systemd.network.networks.<name>.dhcp.CriticalConnection</literal> - has been removed following upstream systemd's deprecation of the same. It is recommended to use - <literal>systemd.network.networks.<name>.networkConfig.KeepConfiguration</literal> instead. - See <citerefentry><refentrytitle>systemd.network</refentrytitle> - <manvolnum>5</manvolnum></citerefentry> for details. - </para> - </listitem> - <listitem> - <para> - The <literal>systemd-networkd</literal> option - <literal>systemd.network.networks._name_.dhcpConfig</literal> - has been renamed to - <xref linkend="opt-systemd.network.networks._name_.dhcpV4Config"/> - following upstream systemd's documentation change. - See <citerefentry><refentrytitle>systemd.network</refentrytitle> - <manvolnum>5</manvolnum></citerefentry> for details. - </para> - </listitem> - <listitem> - <para> - In the <literal>picom</literal> module, several options that accepted - floating point numbers encoded as strings (for example - <xref linkend="opt-services.picom.activeOpacity"/>) have been changed - to the (relatively) new native <literal>float</literal> type. To migrate - your configuration simply remove the quotes around the numbers. - </para> - </listitem> - <listitem> - <para> - When using <literal>buildBazelPackage</literal> from Nixpkgs, - <literal>flat</literal> hash mode is now used for dependencies - instead of <literal>recursive</literal>. This is to better allow - using hashed mirrors where needed. As a result, these hashes - will have changed. - </para> - </listitem> - <listitem> - <para> - The syntax of the PostgreSQL configuration file is now checked at build - time. If your configuration includes a file inaccessible inside the build - sandbox, set <varname>services.postgresql.checkConfig</varname> to - <literal>false</literal>. - </para> - </listitem> - <listitem> - <para> - The rkt module has been removed, it was archived by upstream. - </para> - </listitem> - <listitem> - <para> - The <link xlink:href="https://bazaar.canonical.com">Bazaar</link> VCS is - unmaintained and, as consequence of the Python 2 EOL, the packages - <literal>bazaar</literal> and <literal>bazaarTools</literal> were - removed. Breezy, the backward compatible fork of Bazaar (see the - <link xlink:href="https://www.jelmer.uk/breezy-intro.html">announcement</link>), - was packaged as <literal>breezy</literal> and can be used instead. - </para> - <para> - Regarding Nixpkgs, <literal>fetchbzr</literal>, - <literal>nix-prefetch-bzr</literal> and Bazaar support in Hydra will - continue to work through Breezy. - </para> - </listitem> - <listitem> - <para> - In addition to the hostname, the fully qualified domain name (FQDN), - which consists of <literal>${networking.hostName}</literal> and - <literal>${networking.domain}</literal> is now added to - <literal>/etc/hosts</literal>, to allow local FQDN resolution, as used by the - <literal>hostname --fqdn</literal> command and other applications that - try to determine the FQDN. These new entries take precedence over entries - from the DNS which could cause regressions in some very specific setups. - Additionally the hostname is now resolved to <literal>127.0.0.2</literal> - instead of <literal>127.0.1.1</literal> to be consistent with what - <literal>nss-myhostname</literal> (from systemd) returns. - The old behaviour can e.g. be restored by using - <literal>networking.hosts = lib.mkForce { "127.0.1.1" = [ config.networking.hostName ]; };</literal>. - </para> - </listitem> - <listitem> - <para> - The hostname (<literal>networking.hostName</literal>) must now be a valid - DNS label (see RFC 1035, RFC 1123) and as such must not contain the domain part. - This means that the hostname must start with a letter or digit, end with a letter - or digit, and have as interior characters only letters, digits, and - hyphen. The maximum length is 63 characters. Additionally it is - recommended to only use lower-case characters. - If (e.g. for legacy reasons) a FQDN is required as the Linux kernel network node hostname - (<literal>uname --nodename</literal>) the option - <literal>boot.kernel.sysctl."kernel.hostname"</literal> - can be used as a workaround (but be aware of the 64 character limit). - </para> - </listitem> - <listitem> - <para> - The GRUB specific option <option>boot.loader.grub.extraInitrd</option> - has been replaced with the generic option - <option>boot.initrd.secrets</option>. This option creates a secondary - initrd from the specified files, rather than using a manually created - initrd file. - - Due to an existing bug with <option>boot.loader.grub.extraInitrd</option>, - it is not possible to directly boot an older generation that used that - option. It is still possible to rollback to that generation if the required - initrd file has not been deleted. - </para> - </listitem> - <listitem> - <para> - The <link xlink:href="https://github.com/okTurtles/dnschain">DNSChain</link> - package and NixOS module have been removed from Nixpkgs as the software is - unmaintained and can't be built. For more information see issue - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/89205">#89205</link>. - </para> - </listitem> - <listitem> - <para> - In the <literal>resilio</literal> module, <xref linkend="opt-services.resilio.httpListenAddr"/> has been changed to listen to <literal>[::1]</literal> instead of <literal>0.0.0.0</literal>. - </para> - </listitem> - <listitem> - <para> - <literal>sslh</literal> has been updated to version - <literal>1.21</literal>. The <literal>ssl</literal> probe must be - renamed to <literal>tls</literal> in <xref linkend="opt-services.sslh.appendConfig"/>. - </para> - </listitem> - <listitem> - <para> - Users of <link xlink:href="http://openafs.org">OpenAFS 1.6</link> must - upgrade their services to OpenAFS 1.8! In this release, the OpenAFS package - version 1.6.24 is marked broken but can be used during transition to - OpenAFS 1.8.x. Use the options - <option>services.openafsClient.packages.module</option>, - <option>services.openafsClient.packages.programs</option> and - <option>services.openafsServer.package</option> to select a different - OpenAFS package. OpenAFS 1.6 will be removed in the next release. The - package <literal>openafs</literal> and the service options will then - silently point to the OpenAFS 1.8 release. - </para> - <para> - See also the OpenAFS <link - xlink:href="http://docs.openafs.org/AdminGuide/index.html">Administrator - Guide</link> for instructions. Beware of the following when updating - servers: - <itemizedlist> - <listitem> - <para> - The storage format of the server key has changed and the key must be converted before running the new release. - </para> - </listitem> - <listitem> - <para> - When updating multiple database servers, turn off the database servers - from the highest IP down to the lowest with resting periods in - between. Start up in reverse order. Do not concurrently run database - servers working with different OpenAFS releases! - </para> - </listitem> - <listitem> - <para> - Update servers first, then clients. - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - Radicale's default package has changed from 2.x to 3.x. An upgrade - checklist can be found - <link xlink:href="https://github.com/Kozea/Radicale/blob/3.0.x/NEWS.md#upgrade-checklist">here</link>. - You can use the newer version in the NixOS service by setting the - <literal>package</literal> to <literal>radicale3</literal>, which is done - automatically if <literal>stateVersion</literal> is 20.09 or higher. - </para> - </listitem> - <listitem> - <para> - <literal>udpt</literal> experienced a complete rewrite from C++ to rust. The configuration format changed from ini to toml. - The new configuration documentation can be found at - <link xlink:href="https://naim94a.github.io/udpt/config.html">the official website</link> and example - configuration is packaged in <literal>${udpt}/share/udpt/udpt.toml</literal>. - </para> - </listitem> - <listitem> - <para> - We now have a unified <xref linkend="opt-services.xserver.displayManager.autoLogin"/> option interface - to be used for every display-manager in NixOS. - </para> - </listitem> - <listitem> - <para> - The <literal>bitcoind</literal> module has changed to multi-instance, using submodules. - Therefore, it is now mandatory to name each instance. - To use this new multi-instance config with an existing bitcoind data directory and user, - you have to adjust the original config, e.g.: -<programlisting> - services.bitcoind = { - enable = true; - extraConfig = "..."; - ... - }; -</programlisting> - To something similar: -<programlisting> - services.bitcoind.mainnet = { - enable = true; - dataDir = "/var/lib/bitcoind"; - user = "bitcoin"; - extraConfig = "..."; - ... - }; -</programlisting> - The key settings are: - <itemizedlist> - <listitem> - <para> - <literal>dataDir</literal> - to continue using the same data directory. - </para> - </listitem> - <listitem> - <para> - <literal>user</literal> - to continue using the same user so that bitcoind maintains access to its files. - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - Graylog introduced a change in the LDAP server certificate validation behaviour for version 3.3.3 which might break existing setups. - When updating Graylog from a version before 3.3.3 make sure to check the Graylog <link xlink:href="https://www.graylog.org/post/announcing-graylog-v3-3-3">release info</link> for information on how to avoid the issue. - </para> - </listitem> - <listitem> - <para> - The <literal>dokuwiki</literal> module has changed to multi-instance, using submodules. - Therefore, it is now mandatory to name each instance. Moreover, forcing SSL by default has been dropped, so - <literal>nginx.forceSSL</literal> and <literal>nginx.enableACME</literal> are no longer set to <literal>true</literal>. - To continue using your service with the original SSL settings, you have to adjust the original config, e.g.: -<programlisting> -services.dokuwiki = { - enable = true; - ... -}; -</programlisting> - To something similar: -<programlisting> -services.dokuwiki."mywiki" = { - enable = true; - nginx = { - forceSSL = true; - enableACME = true; - }; - ... -}; -</programlisting> - The base package has also been upgraded to the 2020-07-29 "Hogfather" release. Plugins might be incompatible or require upgrading. - </para> - </listitem> - <listitem> - <para> - The <xref linkend="opt-services.postgresql.dataDir"/> option is now set to <literal>"/var/lib/postgresql/${cfg.package.psqlSchema}"</literal> regardless of your - <xref linkend="opt-system.stateVersion"/>. Users with an existing postgresql install that have a <xref linkend="opt-system.stateVersion"/> of <literal>17.03</literal> or below - should double check what the value of their <xref linkend="opt-services.postgresql.dataDir"/> option is (<literal>/var/db/postgresql</literal>) and then explicitly - set this value to maintain compatibility: -<programlisting> -services.postgresql.dataDir = "/var/db/postgresql"; -</programlisting> - </para> - <para> - The postgresql module now expects there to be a database super user account called <literal>postgres</literal> regardless of your <xref linkend="opt-system.stateVersion"/>. Users - with an existing postgresql install that have a <xref linkend="opt-system.stateVersion"/> of <literal>17.03</literal> or below should run the following SQL statements as a - database super admin user before upgrading: -<programlisting> -CREATE ROLE postgres LOGIN SUPERUSER; -</programlisting> - </para> - </listitem> - <listitem> - <para> - The USBGuard module now removes options and instead hardcodes values for <literal>IPCAccessControlFiles</literal>, <literal>ruleFiles</literal>, and <literal>auditFilePath</literal>. Audit logs can be found in the journal. - </para> - </listitem> - <listitem> - <para> - The NixOS module system now evaluates option definitions more strictly, allowing it to detect a larger set of problems. - As a result, what previously evaluated may not do so anymore. - See <link xlink:href="https://github.com/NixOS/nixpkgs/pull/82743#issuecomment-674520472">the PR that changed this</link> for more info. - </para> - </listitem> - <listitem> - <para> - For NixOS configuration options, the type <literal>loaOf</literal>, after - its initial deprecation in release 20.03, has been removed. In NixOS and - Nixpkgs options using this type have been converted to <literal>attrsOf</literal>. - For more information on this change have look at these links: - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/1800">issue #1800</link>, - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/63103">PR #63103</link>. - </para> - </listitem> - <listitem> - <para> - <literal>config.systemd.services.${name}.path</literal> now returns a list of paths instead of a colon-separated string. - </para> - </listitem> - <listitem> - <para> - Caddy module now uses Caddy v2 by default. Caddy v1 can still be used by setting - <xref linkend="opt-services.caddy.package"/> to <literal>pkgs.caddy1</literal>. - </para> - <para> - New option <xref linkend="opt-services.caddy.adapter"/> has been added. - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-services.jellyfin.enable">jellyfin</link> module will use and stay on the Jellyfin version <literal>10.5.5</literal> - if <literal>stateVersion</literal> is lower than <literal>20.09</literal>. This is because significant changes were made to the database schema, - and it is highly recommended to backup your instance before upgrading. After making your backup, you can upgrade to the latest version either by - setting your <literal>stateVersion</literal> to <literal>20.09</literal> or higher, or set the <option>services.jellyfin.package</option> to - <literal>pkgs.jellyfin</literal>. If you do not wish to upgrade Jellyfin, but want to change your <literal>stateVersion</literal>, you can set - the value of <option>services.jellyfin.package</option> to <literal>pkgs.jellyfin_10_5</literal>. - </para> - </listitem> - <listitem> - <para> - The <literal>security.rngd</literal> service is now disabled by default. - This choice was made because there's krngd in the linux kernel space making it (for most usecases) - functionally redundent. - </para> - </listitem> - <listitem> - <para> - The <literal>hardware.nvidia.optimus_prime.enable</literal> service has been renamed to - <literal>hardware.nvidia.prime.sync.enable</literal> and has many new enhancements. - Related nvidia prime settings may have also changed. - </para> - </listitem> - <listitem> - <para> - The package <package>nextcloud17</package> has been removed and <package>nextcloud18</package> was marked as insecure - since both of them will <link xlink:href="https://docs.nextcloud.com/server/19/admin_manual/release_schedule.html"> - will be EOL (end of life) within the lifetime of 20.09</link>. - </para> - <para> - It's necessary to upgrade to <package>nextcloud19</package>: - <itemizedlist> - <listitem> - <para> - From <package>nextcloud17</package>, you have to upgrade to <package>nextcloud18</package> first as - Nextcloud doesn't allow going multiple major revisions forward in a single upgrade. This is possible - by setting <xref linkend="opt-services.nextcloud.package" /> to <package>nextcloud18</package>. - </para> - </listitem> - <listitem> - <para> - From <package>nextcloud18</package>, it's possible to directly upgrade to <package>nextcloud19</package> - by setting <xref linkend="opt-services.nextcloud.package" /> to <package>nextcloud19</package>. - </para> - </listitem> - </itemizedlist> - </para> - </listitem> - <listitem> - <para> - The GNOME desktop manager no longer default installs <package>gnome3.epiphany</package>. - It was chosen to do this as it has a usability breaking issue (see issue <link xlink:href="https://github.com/NixOS/nixpkgs/issues/98819">#98819</link>) - that makes it unsuitable to be a default app. - </para> - <note> - <para> - Issue <link - xlink:href="https://github.com/NixOS/nixpkgs/issues/98819">#98819</link> - is now fixed and <package>gnome3.epiphany</package> is once - again installed by default. - </para> - </note> - </listitem> - <listitem> - <para> - If you want to manage the configuration of <package>wpa_supplicant</package> outside of NixOS you must ensure that none of <xref linkend="opt-networking.wireless.networks" />, <xref linkend="opt-networking.wireless.extraConfig" /> or <xref linkend="opt-networking.wireless.userControlled.enable" /> is being used or <literal>true</literal>. - Using any of those options will cause <package>wpa_supplicant</package> to be started with a NixOS generated configuration file instead of your own. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.09-notable-changes"> - <title>Other Notable Changes</title> - - <itemizedlist> - <listitem> - <para>SD images are now compressed by default using <literal>zstd</literal>. The compression for ISO images has also been changed to <literal>zstd</literal>, but ISO images are still not compressed by default.</para> - </listitem> - <listitem> - <para> - <option>services.journald.rateLimitBurst</option> was updated from - <literal>1000</literal> to <literal>10000</literal> to follow the new - upstream systemd default. - </para> - </listitem> - <listitem> - <para> - The <package>notmuch</package> package move its emacs-related binaries and - emacs lisp files to a separate output. They're not part - of the default <literal>out</literal> output anymore - if you relied on the - <literal>notmuch-emacs-mua</literal> binary or the emacs lisp files, access them via - the <literal>notmuch.emacs</literal> output. - - Device tree overlay support was improved in - <link xlink:href="https://github.com/NixOS/nixpkgs/pull/79370">#79370</link> - and now uses <xref linkend="opt-hardware.deviceTree.kernelPackage"/> - instead of <option>hardware.deviceTree.base</option>. - - <xref linkend="opt-hardware.deviceTree.overlays"/> configuration was - extended to support <literal>.dts</literal> files with symbols. - - Device trees can now be filtered by setting - <xref linkend="opt-hardware.deviceTree.filter"/> option. - </para> - </listitem> - <listitem> - <para> - The default output of <literal>buildGoPackage</literal> is now <literal>$out</literal> instead of <literal>$bin</literal>. - </para> - </listitem> - <listitem> - <para> - <literal>buildGoModule</literal> <literal>doCheck</literal> now defaults to <literal>true</literal>. - </para> - </listitem> - <listitem> - <para> - Packages built using <literal>buildRustPackage</literal> now use <literal>release</literal> - mode for the <literal>checkPhase</literal> by default. - </para> - <para> - Please note that Rust packages utilizing a custom build/install procedure - (e.g. by using a <filename>Makefile</filename>) or test suites that rely on the - structure of the <filename>target/</filename> directory may break due to those assumptions. - For further information, please read the Rust section in the Nixpkgs manual. - </para> - </listitem> - <listitem> - <para> - The cc- and binutils-wrapper's "infix salt" and <literal>_BUILD_</literal> and <literal>_TARGET_</literal> user infixes have been replaced with with a "suffix salt" and suffixes and <literal>_FOR_BUILD</literal> and <literal>_FOR_TARGET</literal>. - This matches the autotools convention for env vars which standard for these things, making interfacing with other tools easier. - </para> - </listitem> - <listitem> - <para> - Additional Git documentation (HTML and text files) is now available via the <literal>git-doc</literal> package. - </para> - </listitem> - <listitem> - <para> - Default algorithm for ZRAM swap was changed to <literal>zstd</literal>. - </para> - </listitem> - <listitem> - <para> - The installer now enables sshd by default. This improves installation on headless machines especially ARM single-board-computer. - To login through ssh, either a password or an ssh key must be set for the root user or the nixos user. - </para> - </listitem> - <listitem> - <para> - The scripted networking system now uses <literal>.link</literal> files in - <literal>/etc/systemd/network</literal> to configure mac address and link MTU, - instead of the sometimes buggy <literal>network-link-*</literal> units, which - have been removed. - Bringing the interface up has been moved to the beginning of the - <literal>network-addresses-*</literal> unit. - Note this doesn't require <command>systemd-networkd</command> - it's udev that - parses <literal>.link</literal> files. - Extra care needs to be taken in the presence of <link xlink:href="https://wiki.debian.org/NetworkInterfaceNames#THE_.22PERSISTENT_NAMES.22_SCHEME">legacy udev rules</link> - to rename interfaces, as MAC Address and MTU defined in these options can only match on the original link name. - In such cases, you most likely want to create a <literal>10-*.link</literal> file through <xref linkend="opt-systemd.network.links"/> and set both name and MAC Address / MTU there. - </para> - </listitem> - <listitem> - <para> - Grafana received a major update to version 7.x. A plugin is now needed for - image rendering support, and plugins must now be signed by default. More - information can be found - <link xlink:href="https://grafana.com/docs/grafana/latest/installation/upgrading/#upgrading-to-v7-0">in the Grafana documentation</link>. - </para> - </listitem> - <listitem> - <para> - The <literal>hardware.u2f</literal> module, which was installing udev rules - was removed, as udev gained native support to handle FIDO security tokens. - </para> - </listitem> - <listitem> - <para> - The <literal>services.transmission</literal> module - was enhanced with the new options: - <xref linkend="opt-services.transmission.credentialsFile"/>, - <xref linkend="opt-services.transmission.openFirewall"/>, - and <xref linkend="opt-services.transmission.performanceNetParameters"/>. - </para> - <para> - <literal>transmission-daemon</literal> is now started with additional systemd sandbox/hardening options for better security. - Please <link xlink:href="https://github.com/NixOS/nixpkgs/issues">report</link> - any use case where this is not working well. - In particular, the <literal>RootDirectory</literal> option newly set - forbids uploading or downloading a torrent outside of the default directory - configured at <link linkend="opt-services.transmission.settings">settings.download-dir</link>. - If you really need Transmission to access other directories, - you must include those directories into the <literal>BindPaths</literal> of the service: -<programlisting> -systemd.services.transmission.serviceConfig.BindPaths = [ "/path/to/alternative/download-dir" ]; -</programlisting> - </para> - <para> - Also, connection to the RPC (Remote Procedure Call) of <literal>transmission-daemon</literal> - is now only available on the local network interface by default. - Use: -<programlisting> -services.transmission.settings.rpc-bind-address = "0.0.0.0"; -</programlisting> - to get the previous behavior of listening on all network interfaces. - </para> - </listitem> - <listitem> - <para> - With this release <literal>systemd-networkd</literal> (when enabled through <xref linkend="opt-networking.useNetworkd"/>) - has it's netlink socket created through a <literal>systemd.socket</literal> unit. This gives us control over - socket buffer sizes and other parameters. For larger setups where networkd has to create a lot of (virtual) - devices the default buffer size (currently 128MB) is not enough. - </para> - <para> - On a machine with >100 virtual interfaces (e.g., wireguard tunnels, VLANs, …), that all have to - be brought up during system startup, the receive buffer size will spike for a brief period. - Eventually some of the message will be dropped since there is not enough (permitted) buffer - space available. - </para> - <para> - By having <literal>systemd-networkd</literal> start with a netlink socket created by - <literal>systemd</literal> we can configure the <literal>ReceiveBufferSize=</literal> parameter - in the socket options (i.e. <literal>systemd.sockets.systemd-networkd.socketOptions.ReceiveBufferSize</literal>) - without recompiling <literal>systemd-networkd</literal>. - </para> - <para> - Since the actual memory requirements depend on hardware, timing, exact - configurations etc. it isn't currently possible to infer a good default - from within the NixOS module system. Administrators are advised to - monitor the logs of <literal>systemd-networkd</literal> for <literal>rtnl: kernel receive buffer - overrun</literal> spam and increase the memory limit as they see fit. - </para> - <para> - Note: Increasing the <literal>ReceiveBufferSize=</literal> doesn't allocate any memory. It just increases - the upper bound on the kernel side. The memory allocation depends on the amount of messages that are - queued on the kernel side of the netlink socket. - </para> - </listitem> - <listitem> - <para> - Specifying <link linkend="opt-services.dovecot2.mailboxes">mailboxes</link> in the <package>dovecot2</package> module - as a list is deprecated and will break eval in 21.05. Instead, an attribute-set should be specified where the <literal>name</literal> - should be the key of the attribute. - </para> - <para> - This means that a configuration like this -<programlisting>{ - <link linkend="opt-services.dovecot2.mailboxes">services.dovecot2.mailboxes</link> = [ - { name = "Junk"; - auto = "create"; - } - ]; -}</programlisting> - should now look like this: -<programlisting>{ - <link linkend="opt-services.dovecot2.mailboxes">services.dovecot2.mailboxes</link> = { - Junk.auto = "create"; - }; -}</programlisting> - </para> - </listitem> - <listitem> - <para> - <package>netbeans</package> was upgraded to 12.0 and now defaults to OpenJDK 11. This might cause problems if your projects depend on packages that were removed in Java 11. - </para> - </listitem> - <listitem> - <para> - <package>nextcloud</package> has been updated to <link xlink:href="https://nextcloud.com/blog/nextcloud-hub-brings-productivity-to-home-office/">v19</link>. - </para> - <para> - If you have an existing installation, please make sure that you're on - <package>nextcloud18</package> before upgrading to <package>nextcloud19</package> - since Nextcloud doesn't support upgrades across multiple major versions. - </para> - </listitem> - <listitem> - <para> - The <literal>nixos-run-vms</literal> script now deletes the - previous run machines states on test startup. You can use the - <literal>--keep-vm-state</literal> flag to match the previous - behaviour and keep the same VM state between different test runs. - </para> - </listitem> - <listitem> - <para> - The <link linkend="opt-nix.buildMachines">nix.buildMachines</link> option is now type-checked. - There are no functional changes, however this may require updating some configurations to use correct types for all attributes. - </para> - </listitem> - <listitem> - <para> - The <literal>fontconfig</literal> module stopped generating config and cache files for fontconfig 2.10.x, the <filename>/etc/fonts/fonts.conf</filename> now belongs to the latest fontconfig, just like on other Linux distributions, and we will <link xlink:href="https://github.com/NixOS/nixpkgs/pull/95358">no longer</link> be versioning the config directories. - </para> - <para> - Fontconfig 2.10.x was removed from Nixpkgs since it hasn’t been used in any Nixpkgs package for years now. - </para> - </listitem> - <listitem> - <para> - Nginx module <literal>nginxModules.fastcgi-cache-purge</literal> renamed to official name <literal>nginxModules.cache-purge</literal>. - Nginx module <literal>nginxModules.ngx_aws_auth</literal> renamed to official name <literal>nginxModules.aws-auth</literal>. - </para> - </listitem> - <listitem> - <para> - The option <option>defaultPackages</option> was added. It installs the packages <package>perl</package>, <package>rsync</package> and <package>strace</package> for now. They were added unconditionally to <option>systemPackages</option> before, but are not strictly necessary for a minimal NixOS install. You can set it to an empty list to have a more minimal system. Be aware that some functionality might still have an impure dependency on those packages, so things might break. - </para> - </listitem> - <listitem> - <para> - The <literal>undervolt</literal> option no longer needs to apply its - settings every 30s. If they still become undone, open an issue and restore - the previous behaviour using <literal>undervolt.useTimer</literal>. - </para> - </listitem> - <listitem> - <para> - Agda has been heavily reworked. - <itemizedlist> - <listitem> - <para> - <literal>agda.mkDerivation</literal> has been heavily changed and - is now located at <package>agdaPackages.mkDerivation</package>. - </para> - </listitem> - <listitem> - <para> - New top-level packages <package>agda</package> and - <literal>agda.withPackages</literal> have been added, the second - of which sets up agda with access to chosen libraries. - </para> - </listitem> - <listitem> - <para> - All agda libraries now live under - <literal>agdaPackages</literal>. - </para> - </listitem> - <listitem> - <para> - Many broken libraries have been removed. - </para> - </listitem> - </itemizedlist> - See the <link - xlink:href="https://nixos.org/nixpkgs/manual/#agda">new - documentation</link> for more information. - </para> - </listitem> - <listitem> - <para> - The <literal>deepin</literal> package set has been removed from - nixpkgs. It was a work in progress to package the - <link xlink:href="https://www.deepin.org/en/dde/">Deepin Desktop Environment (DDE)</link>, - including libraries, tools and applications, and it was still - missing a service to launch the desktop environment. It has shown - to no longer be a feasible goal due to reasons discussed in - <link xlink:href="https://github.com/NixOS/nixpkgs/issues/94870">issue #94870</link>. - The package <literal>netease-cloud-music</literal> has also been - removed, as it depends on libraries from deepin. - </para> - </listitem> - <listitem> - <para> - The <literal>opendkim</literal> module now uses systemd sandboxing features - to limit the exposure of the system towards the opendkim service. - </para> - </listitem> - </itemizedlist> - <itemizedlist> - <listitem> - <para /> - <para> - Kubernetes has been upgraded to 1.19.1, which also means that the - golang version to build it has been bumped to 1.15. This may have - consequences for your existing clusters and their certificates. Please - consider - <link xlink:href="https://relnotes.k8s.io/?markdown=93264"> - the release notes for Kubernetes 1.19 carefully - </link> - before upgrading. - </para> - </listitem> - </itemizedlist> - <itemizedlist> - <listitem> - <para> - For AMD GPUs, Vulkan can now be used by adding <literal>amdvlk</literal> - to <literal>hardware.opengl.extraPackages</literal>. - </para> - </listitem> - <listitem> - <para> - Similarly, still for AMD GPUs, the ROCm OpenCL stack can now be used by adding - <literal>rocm-opencl-icd</literal> to - <literal>hardware.opengl.extraPackages</literal>. - </para> - </listitem> - </itemizedlist> - </section> - - <section xmlns="http://docbook.org/ns/docbook" - xmlns:xlink="http://www.w3.org/1999/xlink" - xmlns:xi="http://www.w3.org/2001/XInclude" - version="5.0" - xml:id="sec-release-20.09-contributions"> - <title>Contributions</title> - <para> - I, Jonathan Ringer, would like to thank the following individuals for their work on nixpkgs. This release could not be done without the hard work of the NixOS community. There were 31282 contributions across 1313 contributors. - </para> - <orderedlist> - <para> - Top contributors to NixOS/Nixpkgs from the 20.03 release to the 20.09 release: - </para> - <listitem> - <para> - 2288 Mario Rodas - </para> - </listitem> - <listitem> - <para> - 1837 Frederik Rietdijk - </para> - </listitem> - <listitem> - <para> - 946 Jörg Thalheim - </para> - </listitem> - <listitem> - <para> - 925 Maximilian Bosch - </para> - </listitem> - <listitem> - <para> - 687 Jonathan Ringer - </para> - </listitem> - <listitem> - <para> - 651 Jan Tojnar - </para> - </listitem> - <listitem> - <para> - 622 Daniël de Kok - </para> - </listitem> - <listitem> - <para> - 605 WORLDofPEACE - </para> - </listitem> - <listitem> - <para> - 597 Florian Klink - </para> - </listitem> - <listitem> - <para> - 528 José Romildo Malaquias - </para> - </listitem> - </orderedlist> - - <orderedlist> - <para> - Top contributors to stabilizing this release (Zero Hydra Failures period): - </para> - <listitem> - <para> - 281 volth - </para> - </listitem> - <listitem> - <para> - 101 Robert Scott - </para> - </listitem> - <listitem> - <para> - 86 Tim Steinbach - </para> - </listitem> - <listitem> - <para> - 76 WORLDofPEACE - </para> - </listitem> - <listitem> - <para> - 49 Maximilian Bosch - </para> - </listitem> - <listitem> - <para> - 42 Thomas Tuegel - </para> - </listitem> - <listitem> - <para> - 37 Doron Behar - </para> - </listitem> - <listitem> - <para> - 36 Vladimír Čunát - </para> - </listitem> - <listitem> - <para> - 27 Jonathan Ringer - </para> - </listitem> - <listitem> - <para> - 27 Maciej Krüger - </para> - </listitem> - </orderedlist> - - <para> - I, Jonathan Ringer, would also like to personally thank @WORLDofPEACE for their help in mentoring me on the release process. Special thanks also goes to Thomas Tuegel for helping immensely with stabilizing Qt, KDE, and Plasma5; I would also like to thank Robert Scott for his numerous fixes and pull request reviews. - </para> - - </section> -</section> diff --git a/nixos/doc/manual/release-notes/rl-2111.section.md b/nixos/doc/manual/release-notes/rl-2111.section.md index e97aed4ccf2..f7578c8ddee 100644 --- a/nixos/doc/manual/release-notes/rl-2111.section.md +++ b/nixos/doc/manual/release-notes/rl-2111.section.md @@ -2,43 +2,34 @@ In addition to numerous new and upgraded packages, this release has the following highlights: -* Support is planned until the end of April 2022, handing over to 22.05. +- Support is planned until the end of April 2022, handing over to 22.05. ## Highlights {#sec-release-21.11-highlights} -* PHP now defaults to PHP 8.0, updated from 7.4. +- PHP now defaults to PHP 8.0, updated from 7.4. ## New Services {#sec-release-21.11-new-services} -* [geoipupdate](https://github.com/maxmind/geoipupdate), a GeoIP - database updater from MaxMind. Available as - [services.geoipupdate](options.html#opt-services.geoipupdate.enable). +- [geoipupdate](https://github.com/maxmind/geoipupdate), a GeoIP database updater from MaxMind. Available as [services.geoipupdate](options.html#opt-services.geoipupdate.enable). -* [sourcehut](https://sr.ht), a collection of tools useful for software - development. Available as - [services.sourcehut](options.html#opt-services.sourcehut.enable). +- [sourcehut](https://sr.ht), a collection of tools useful for software development. Available as [services.sourcehut](options.html#opt-services.sourcehut.enable). -* [ucarp](https://download.pureftpd.org/pub/ucarp/README), an userspace - implementation of the Common Address Redundancy Protocol (CARP). Available as - [networking.ucarp](options.html#opt-networking.ucarp.enable). +- [ucarp](https://download.pureftpd.org/pub/ucarp/README), an userspace implementation of the Common Address Redundancy Protocol (CARP). Available as [networking.ucarp](options.html#opt-networking.ucarp.enable). ## Backward Incompatibilities {#sec-release-21.11-incompatibilities} -* The `staticjinja` package has been upgraded from 1.0.4 to 2.0.0 +- The `staticjinja` package has been upgraded from 1.0.4 to 2.0.0 -* `services.geoip-updater` was broken and has been replaced by - [services.geoipupdate](options.html#opt-services.geoipupdate.enable). +- `services.geoip-updater` was broken and has been replaced by [services.geoipupdate](options.html#opt-services.geoipupdate.enable). -* PHP 7.3 is no longer supported due to upstream not supporting this - version for the entire lifecycle of the 21.11 release. +- PHP 7.3 is no longer supported due to upstream not supporting this version for the entire lifecycle of the 21.11 release. -* Those making use of `buildBazelPackage` will need to regenerate the fetch - hashes (preferred), or set `fetchConfigured = false;`. +- Those making use of `buildBazelPackage` will need to regenerate the fetch hashes (preferred), or set `fetchConfigured = false;`. -* fsharp41 has been removed in preference to use the latest dotnet-sdk +- fsharp41 has been removed in preference to use the latest dotnet-sdk + +- The following F#-related packages have been removed for being unmaintaned. Please use `fetchNuGet` for specific packages. -* The following F#-related packages have been removed for being unmaintaned. - Please use `fetchNuGet` for specific packages. - ExtCore - Fake - Fantomas @@ -68,10 +59,9 @@ In addition to numerous new and upgraded packages, this release has the followin - ExcelDnaRegistration - MathNetNumerics -* `programs.x2goserver` is now `services.x2goserver` +- `programs.x2goserver` is now `services.x2goserver` -* The following dotnet-related packages have been removed for being unmaintaned. - Please use `fetchNuGet` for specific packages. +- The following dotnet-related packages have been removed for being unmaintaned. Please use `fetchNuGet` for specific packages. - Autofac - SystemValueTuple - MicrosoftDiaSymReader diff --git a/nixos/modules/services/security/privacyidea.nix b/nixos/modules/services/security/privacyidea.nix index 2696dca4c76..63271848e94 100644 --- a/nixos/modules/services/security/privacyidea.nix +++ b/nixos/modules/services/security/privacyidea.nix @@ -7,7 +7,7 @@ let uwsgi = pkgs.uwsgi.override { plugins = [ "python3" ]; }; python = uwsgi.python3; - penv = python.withPackages (ps: [ ps.privacyidea ]); + penv = python.withPackages (const [ pkgs.privacyidea ]); logCfg = pkgs.writeText "privacyidea-log.cfg" '' [formatters] keys=detail @@ -194,7 +194,7 @@ in (mkIf cfg.enable { - environment.systemPackages = [ python.pkgs.privacyidea ]; + environment.systemPackages = [ pkgs.privacyidea ]; services.postgresql.enable = mkDefault true; diff --git a/pkgs/development/python-modules/privacyidea/default.nix b/pkgs/applications/misc/privacyidea/default.nix index 11ff6f71af6..7545253d506 100644 --- a/pkgs/development/python-modules/privacyidea/default.nix +++ b/pkgs/applications/misc/privacyidea/default.nix @@ -1,43 +1,43 @@ -{ lib, buildPythonPackage, fetchFromGitHub, cacert, openssl, python, nixosTests - -, cryptography, pyrad, pymysql, python-dateutil, flask-versioned, flask_script -, defusedxml, croniter, flask_migrate, pyjwt1, configobj, sqlsoup, pillow -, python-gnupg, passlib, pyopenssl, beautifulsoup4, smpplib, flask-babel -, ldap3, huey, pyyaml, qrcode, oauth2client, requests, lxml, cbor2, psycopg2 -, pydash, ecdsa - -, mock, pytestCheckHook, responses, testfixtures +{ lib, fetchFromGitHub, cacert, openssl, nixosTests +, python3 }: -buildPythonPackage rec { +let + python3' = python3.override { + packageOverrides = self: super: { + sqlalchemy = super.sqlalchemy.overridePythonAttrs (oldAttrs: rec { + version = "1.3.24"; + src = oldAttrs.src.override { + inherit version; + sha256 = "ebbb777cbf9312359b897bf81ba00dae0f5cb69fba2a18265dcc18a6f5ef7519"; + }; + }); + }; + }; +in +python3'.pkgs.buildPythonPackage rec { pname = "privacyIDEA"; - version = "3.5.2"; + version = "3.6"; src = fetchFromGitHub { owner = pname; repo = pname; rev = "v${version}"; - sha256 = "sha256-k2om2LjkFRCT53ECPAJEztCiMdz4fF5eoipVUvSoyGo="; + sha256 = "sha256-yywkQ3TdBzRMbJGY0Seaprztgt0JrCAbgqosMQ5fcQM="; fetchSubmodules = true; }; - patches = [ - # Subset of https://github.com/privacyidea/privacyidea/commit/359db6dd10212b8a210e0a83536e92e9e796a1f8, - # fixes app context errors in tests. Can be removed on the next bump. - ./fix-tests.patch - ]; - - propagatedBuildInputs = [ + propagatedBuildInputs = with python3'.pkgs; [ cryptography pyrad pymysql python-dateutil flask-versioned flask_script defusedxml croniter flask_migrate pyjwt1 configobj sqlsoup pillow python-gnupg passlib pyopenssl beautifulsoup4 smpplib flask-babel ldap3 huey pyyaml qrcode oauth2client requests lxml cbor2 psycopg2 - pydash ecdsa + pydash ecdsa google-auth importlib-metadata ]; passthru.tests = { inherit (nixosTests) privacyidea; }; - checkInputs = [ openssl mock pytestCheckHook responses testfixtures ]; + checkInputs = with python3'.pkgs; [ openssl mock pytestCheckHook responses testfixtures ]; disabledTests = [ "AESHardwareSecurityModuleTestCase" "test_01_cert_request" @@ -61,7 +61,7 @@ buildPythonPackage rec { ''; postInstall = '' - rm -rf $out/${python.sitePackages}/tests + rm -r $out/${python3'.sitePackages}/tests ''; meta = with lib; { diff --git a/pkgs/applications/networking/browsers/tor-browser-bundle-bin/default.nix b/pkgs/applications/networking/browsers/tor-browser-bundle-bin/default.nix index 7fbfccc3896..d1830f1c52f 100644 --- a/pkgs/applications/networking/browsers/tor-browser-bundle-bin/default.nix +++ b/pkgs/applications/networking/browsers/tor-browser-bundle-bin/default.nix @@ -88,19 +88,19 @@ let fteLibPath = makeLibraryPath [ stdenv.cc.cc gmp ]; # Upstream source - version = "10.0.17"; + version = "10.0.18"; lang = "en-US"; srcs = { x86_64-linux = fetchurl { url = "https://dist.torproject.org/torbrowser/${version}/tor-browser-linux64-${version}_${lang}.tar.xz"; - sha256 = "13x38n1cvqmxjz0jf2fda8lx2k25szzmg7gvv08z3q5na7109m2m"; + sha256 = "15ni33mkg3awfmk3ynr0vi4max1h2k0s10xw3dpmdx6chzv4ll14"; }; i686-linux = fetchurl { url = "https://dist.torproject.org/torbrowser/${version}/tor-browser-linux32-${version}_${lang}.tar.xz"; - sha256 = "0f0ndwmzh732svwbcf1lbxlvdxw4i4d56w9xdl5fxd4n7ivqml1q"; + sha256 = "16lx8wkxli1fzq5f6gcw3im4p8k3xdmnmf6w0p7n8hd8681b1w5s"; }; }; in diff --git a/pkgs/applications/networking/cloudflared/default.nix b/pkgs/applications/networking/cloudflared/default.nix index 153f0a9cb99..ed4ffffe451 100644 --- a/pkgs/applications/networking/cloudflared/default.nix +++ b/pkgs/applications/networking/cloudflared/default.nix @@ -2,13 +2,13 @@ buildGoModule rec { pname = "cloudflared"; - version = "2021.5.10"; + version = "2021.6.0"; src = fetchFromGitHub { owner = "cloudflare"; repo = "cloudflared"; rev = version; - sha256 = "sha256-v/ehqaI3TPhHACtxU8PRB9tGp8qrl6AN6buxOhJdevI="; + sha256 = "sha256-cX0kdBPDgwjHphxGWrnXohHPp1nzs4SnvCry4AxMtp0="; }; vendorSha256 = null; diff --git a/pkgs/applications/networking/cluster/nomad/1.0.nix b/pkgs/applications/networking/cluster/nomad/1.0.nix index 0c9ced385fe..ac6938e4ddc 100644 --- a/pkgs/applications/networking/cluster/nomad/1.0.nix +++ b/pkgs/applications/networking/cluster/nomad/1.0.nix @@ -6,6 +6,6 @@ callPackage ./generic.nix { inherit buildGoPackage nvidia_x11 nvidiaGpuSupport; - version = "1.0.7"; - sha256 = "12izilr2x9qw8dxhjqcivakwzhf6jc86g0pmxf52fr9rwaqmpc95"; + version = "1.0.8"; + sha256 = "1kjwa9lnxh5zfzijqgkp94wslkzn6kspwi42kf46vrn0qkiz39f2"; } diff --git a/pkgs/applications/networking/cluster/nomad/1.1.nix b/pkgs/applications/networking/cluster/nomad/1.1.nix index 7c14ca5f4b3..cfc38c2f59e 100644 --- a/pkgs/applications/networking/cluster/nomad/1.1.nix +++ b/pkgs/applications/networking/cluster/nomad/1.1.nix @@ -6,6 +6,6 @@ callPackage ./generic.nix { inherit buildGoPackage nvidia_x11 nvidiaGpuSupport; - version = "1.1.1"; - sha256 = "0y7p85dvxfgzaafgzdmnw3fp9h87zx3z8m1ka4qaiacwah5xwqlv"; + version = "1.1.2"; + sha256 = "08ynfr2lqzv66ymj37qbc72lf2iq41kf94n76pdvynymk4dq98nq"; } diff --git a/pkgs/applications/networking/instant-messengers/element/element-desktop-package.json b/pkgs/applications/networking/instant-messengers/element/element-desktop-package.json index 5293c55f127..063c64fa377 100644 --- a/pkgs/applications/networking/instant-messengers/element/element-desktop-package.json +++ b/pkgs/applications/networking/instant-messengers/element/element-desktop-package.json @@ -2,7 +2,7 @@ "name": "element-desktop", "productName": "Element", "main": "src/electron-main.js", - "version": "1.7.30", + "version": "1.7.31", "description": "A feature-rich client for Matrix.org", "author": "Element", "repository": { @@ -43,8 +43,8 @@ }, "devDependencies": { "asar": "^2.0.1", - "electron-builder": "22.10.5", - "electron-builder-squirrel-windows": "22.10.5", + "electron-builder": "22.11.4", + "electron-builder-squirrel-windows": "22.11.4", "electron-devtools-installer": "^3.1.1", "electron-notarize": "^1.0.0", "eslint": "7.18.0", @@ -68,7 +68,7 @@ }, "build": { "appId": "im.riot.app", - "electronVersion": "12.0.9", + "electronVersion": "12.0.11", "files": [ "package.json", { diff --git a/pkgs/applications/networking/instant-messengers/element/element-desktop-yarndeps.nix b/pkgs/applications/networking/instant-messengers/element/element-desktop-yarndeps.nix index 258f5cb2dad..733cfa3a11a 100644 --- a/pkgs/applications/networking/instant-messengers/element/element-desktop-yarndeps.nix +++ b/pkgs/applications/networking/instant-messengers/element/element-desktop-yarndeps.nix @@ -2,14 +2,6 @@ offline_cache = linkFarm "offline" packages; packages = [ { - name = "7zip_bin___7zip_bin_5.0.3.tgz"; - path = fetchurl { - name = "7zip_bin___7zip_bin_5.0.3.tgz"; - url = "https://registry.yarnpkg.com/7zip-bin/-/7zip-bin-5.0.3.tgz"; - sha1 = "bc5b5532ecafd923a61f2fb097e3b108c0106a3f"; - }; - } - { name = "7zip_bin___7zip_bin_5.1.1.tgz"; path = fetchurl { name = "7zip_bin___7zip_bin_5.1.1.tgz"; @@ -138,11 +130,11 @@ }; } { - name = "_electron_universal___universal_1.0.4.tgz"; + name = "_electron_universal___universal_1.0.5.tgz"; path = fetchurl { - name = "_electron_universal___universal_1.0.4.tgz"; - url = "https://registry.yarnpkg.com/@electron/universal/-/universal-1.0.4.tgz"; - sha1 = "231ac246c39d45b80e159bd21c3f9027dcaa10f5"; + name = "_electron_universal___universal_1.0.5.tgz"; + url = "https://registry.yarnpkg.com/@electron/universal/-/universal-1.0.5.tgz"; + sha1 = "b812340e4ef21da2b3ee77b2b4d35c9b86defe37"; }; } { @@ -418,6 +410,14 @@ }; } { + name = "_malept_flatpak_bundler___flatpak_bundler_0.4.0.tgz"; + path = fetchurl { + name = "_malept_flatpak_bundler___flatpak_bundler_0.4.0.tgz"; + url = "https://registry.yarnpkg.com/@malept/flatpak-bundler/-/flatpak-bundler-0.4.0.tgz"; + sha1 = "e8a32c30a95d20c2b1bb635cc580981a06389858"; + }; + } + { name = "_sindresorhus_is___is_0.14.0.tgz"; path = fetchurl { name = "_sindresorhus_is___is_0.14.0.tgz"; @@ -450,11 +450,11 @@ }; } { - name = "_types_fs_extra___fs_extra_9.0.9.tgz"; + name = "_types_fs_extra___fs_extra_9.0.11.tgz"; path = fetchurl { - name = "_types_fs_extra___fs_extra_9.0.9.tgz"; - url = "https://registry.yarnpkg.com/@types/fs-extra/-/fs-extra-9.0.9.tgz"; - sha1 = "11ed43b3f3c6b3490f1ef9bd17f58da896e2d861"; + name = "_types_fs_extra___fs_extra_9.0.11.tgz"; + url = "https://registry.yarnpkg.com/@types/fs-extra/-/fs-extra-9.0.11.tgz"; + sha1 = "8cc99e103499eab9f347dbc6ca4e99fb8d2c2b87"; }; } { @@ -514,11 +514,11 @@ }; } { - name = "_types_yargs___yargs_15.0.13.tgz"; + name = "_types_yargs___yargs_16.0.3.tgz"; path = fetchurl { - name = "_types_yargs___yargs_15.0.13.tgz"; - url = "https://registry.yarnpkg.com/@types/yargs/-/yargs-15.0.13.tgz"; - sha1 = "34f7fec8b389d7f3c1fd08026a5763e072d3c6dc"; + name = "_types_yargs___yargs_16.0.3.tgz"; + url = "https://registry.yarnpkg.com/@types/yargs/-/yargs-16.0.3.tgz"; + sha1 = "4b6d35bb8e680510a7dc2308518a80ee1ef27e01"; }; } { @@ -730,19 +730,19 @@ }; } { - name = "app_builder_bin___app_builder_bin_3.5.12.tgz"; + name = "app_builder_bin___app_builder_bin_3.5.13.tgz"; path = fetchurl { - name = "app_builder_bin___app_builder_bin_3.5.12.tgz"; - url = "https://registry.yarnpkg.com/app-builder-bin/-/app-builder-bin-3.5.12.tgz"; - sha1 = "bbe174972cc1f481f73d6d92ad47a8b4c7eb4530"; + name = "app_builder_bin___app_builder_bin_3.5.13.tgz"; + url = "https://registry.yarnpkg.com/app-builder-bin/-/app-builder-bin-3.5.13.tgz"; + sha1 = "6dd7f4de34a4e408806f99b8c7d6ef1601305b7e"; }; } { - name = "app_builder_lib___app_builder_lib_22.10.5.tgz"; + name = "app_builder_lib___app_builder_lib_22.11.4.tgz"; path = fetchurl { - name = "app_builder_lib___app_builder_lib_22.10.5.tgz"; - url = "https://registry.yarnpkg.com/app-builder-lib/-/app-builder-lib-22.10.5.tgz"; - sha1 = "24a88581c891e5b187a0d569aa44e7c4a0dc8de2"; + name = "app_builder_lib___app_builder_lib_22.11.4.tgz"; + url = "https://registry.yarnpkg.com/app-builder-lib/-/app-builder-lib-22.11.4.tgz"; + sha1 = "f476e8f1c843d2bcce0348d60e2deae3a71b3474"; }; } { @@ -938,11 +938,11 @@ }; } { - name = "balanced_match___balanced_match_1.0.0.tgz"; + name = "balanced_match___balanced_match_1.0.2.tgz"; path = fetchurl { - name = "balanced_match___balanced_match_1.0.0.tgz"; - url = "https://registry.yarnpkg.com/balanced-match/-/balanced-match-1.0.0.tgz"; - sha1 = "89b4d199ab2bee49de164ea02b89ce462d71b767"; + name = "balanced_match___balanced_match_1.0.2.tgz"; + url = "https://registry.yarnpkg.com/balanced-match/-/balanced-match-1.0.2.tgz"; + sha1 = "e83e3a7e3f300b34cb9d87f615fa0cbf357690ee"; }; } { @@ -986,14 +986,6 @@ }; } { - name = "binaryextensions___binaryextensions_4.15.0.tgz"; - path = fetchurl { - name = "binaryextensions___binaryextensions_4.15.0.tgz"; - url = "https://registry.yarnpkg.com/binaryextensions/-/binaryextensions-4.15.0.tgz"; - sha1 = "c63a502e0078ff1b0e9b00a9f74d3c2b0f8bd32e"; - }; - } - { name = "bl___bl_4.0.3.tgz"; path = fetchurl { name = "bl___bl_4.0.3.tgz"; @@ -1098,19 +1090,19 @@ }; } { - name = "builder_util_runtime___builder_util_runtime_8.7.3.tgz"; + name = "builder_util_runtime___builder_util_runtime_8.7.5.tgz"; path = fetchurl { - name = "builder_util_runtime___builder_util_runtime_8.7.3.tgz"; - url = "https://registry.yarnpkg.com/builder-util-runtime/-/builder-util-runtime-8.7.3.tgz"; - sha1 = "0aaafa52d25295c939496f62231ca9ff06c30e40"; + name = "builder_util_runtime___builder_util_runtime_8.7.5.tgz"; + url = "https://registry.yarnpkg.com/builder-util-runtime/-/builder-util-runtime-8.7.5.tgz"; + sha1 = "fbe59e274818885e0d2e358d5b7017c34ae6b0f5"; }; } { - name = "builder_util___builder_util_22.10.5.tgz"; + name = "builder_util___builder_util_22.11.4.tgz"; path = fetchurl { - name = "builder_util___builder_util_22.10.5.tgz"; - url = "https://registry.yarnpkg.com/builder-util/-/builder-util-22.10.5.tgz"; - sha1 = "8d0b04a3be6acc74938679aa90dcb3181b1ae86b"; + name = "builder_util___builder_util_22.11.4.tgz"; + url = "https://registry.yarnpkg.com/builder-util/-/builder-util-22.11.4.tgz"; + sha1 = "5deee8e067d6e3248791977ce2928b98fe514342"; }; } { @@ -1138,6 +1130,14 @@ }; } { + name = "cacache___cacache_12.0.4.tgz"; + path = fetchurl { + name = "cacache___cacache_12.0.4.tgz"; + url = "https://registry.yarnpkg.com/cacache/-/cacache-12.0.4.tgz"; + sha1 = "668bcbd105aeb5f1d92fe25570ec9525c8faa40c"; + }; + } + { name = "cacache___cacache_12.0.3.tgz"; path = fetchurl { name = "cacache___cacache_12.0.3.tgz"; @@ -1226,6 +1226,14 @@ }; } { + name = "chalk___chalk_4.1.1.tgz"; + path = fetchurl { + name = "chalk___chalk_4.1.1.tgz"; + url = "https://registry.yarnpkg.com/chalk/-/chalk-4.1.1.tgz"; + sha1 = "c80b3fab28bf6371e6863325eee67e618b77e6ad"; + }; + } + { name = "chownr___chownr_1.1.4.tgz"; path = fetchurl { name = "chownr___chownr_1.1.4.tgz"; @@ -1266,6 +1274,14 @@ }; } { + name = "ci_info___ci_info_3.2.0.tgz"; + path = fetchurl { + name = "ci_info___ci_info_3.2.0.tgz"; + url = "https://registry.yarnpkg.com/ci-info/-/ci-info-3.2.0.tgz"; + sha1 = "2876cb948a498797b5236f0095bc057d0dca38b6"; + }; + } + { name = "cidr_regex___cidr_regex_2.0.10.tgz"; path = fetchurl { name = "cidr_regex___cidr_regex_2.0.10.tgz"; @@ -1658,6 +1674,14 @@ }; } { + name = "debug___debug_3.2.7.tgz"; + path = fetchurl { + name = "debug___debug_3.2.7.tgz"; + url = "https://registry.yarnpkg.com/debug/-/debug-3.2.7.tgz"; + sha1 = "72580b7e9145fb39b6676f9c5e5fb100b934179a"; + }; + } + { name = "debug___debug_3.2.6.tgz"; path = fetchurl { name = "debug___debug_3.2.6.tgz"; @@ -1818,19 +1842,19 @@ }; } { - name = "dmg_builder___dmg_builder_22.10.5.tgz"; + name = "dmg_builder___dmg_builder_22.11.4.tgz"; path = fetchurl { - name = "dmg_builder___dmg_builder_22.10.5.tgz"; - url = "https://registry.yarnpkg.com/dmg-builder/-/dmg-builder-22.10.5.tgz"; - sha1 = "65a33c106ead5a350c7de8997c546559bd6e0e7c"; + name = "dmg_builder___dmg_builder_22.11.4.tgz"; + url = "https://registry.yarnpkg.com/dmg-builder/-/dmg-builder-22.11.4.tgz"; + sha1 = "8e3a31bd835d51d3b686d1a6be6c0d08d3e7b1f4"; }; } { - name = "dmg_license___dmg_license_1.0.8.tgz"; + name = "dmg_license___dmg_license_1.0.9.tgz"; path = fetchurl { - name = "dmg_license___dmg_license_1.0.8.tgz"; - url = "https://registry.yarnpkg.com/dmg-license/-/dmg-license-1.0.8.tgz"; - sha1 = "d52e234815f1a07a59706e5f2a2fea71991cf784"; + name = "dmg_license___dmg_license_1.0.9.tgz"; + url = "https://registry.yarnpkg.com/dmg-license/-/dmg-license-1.0.9.tgz"; + sha1 = "a2fb8d692af0e30b0730b5afc91ed9edc2d9cb4f"; }; } { @@ -1850,11 +1874,11 @@ }; } { - name = "dot_prop___dot_prop_4.2.0.tgz"; + name = "dot_prop___dot_prop_4.2.1.tgz"; path = fetchurl { - name = "dot_prop___dot_prop_4.2.0.tgz"; - url = "https://registry.yarnpkg.com/dot-prop/-/dot-prop-4.2.0.tgz"; - sha1 = "1f19e0c2e1aa0e32797c49799f2837ac6af69c57"; + name = "dot_prop___dot_prop_4.2.1.tgz"; + url = "https://registry.yarnpkg.com/dot-prop/-/dot-prop-4.2.1.tgz"; + sha1 = "45884194a71fc2cda71cbb4bceb3a4dd2f433ba4"; }; } { @@ -1882,11 +1906,11 @@ }; } { - name = "dotenv___dotenv_8.2.0.tgz"; + name = "dotenv___dotenv_9.0.2.tgz"; path = fetchurl { - name = "dotenv___dotenv_8.2.0.tgz"; - url = "https://registry.yarnpkg.com/dotenv/-/dotenv-8.2.0.tgz"; - sha1 = "97e619259ada750eea3e4ea3e26bceea5424b16a"; + name = "dotenv___dotenv_9.0.2.tgz"; + url = "https://registry.yarnpkg.com/dotenv/-/dotenv-9.0.2.tgz"; + sha1 = "dacc20160935a37dea6364aa1bef819fb9b6ab05"; }; } { @@ -1914,14 +1938,6 @@ }; } { - name = "editions___editions_6.1.0.tgz"; - path = fetchurl { - name = "editions___editions_6.1.0.tgz"; - url = "https://registry.yarnpkg.com/editions/-/editions-6.1.0.tgz"; - sha1 = "ba6c6cf9f4bb571d9e53ea34e771a602e5a66549"; - }; - } - { name = "editor___editor_1.0.0.tgz"; path = fetchurl { name = "editor___editor_1.0.0.tgz"; @@ -1938,19 +1954,19 @@ }; } { - name = "electron_builder_squirrel_windows___electron_builder_squirrel_windows_22.10.5.tgz"; + name = "electron_builder_squirrel_windows___electron_builder_squirrel_windows_22.11.4.tgz"; path = fetchurl { - name = "electron_builder_squirrel_windows___electron_builder_squirrel_windows_22.10.5.tgz"; - url = "https://registry.yarnpkg.com/electron-builder-squirrel-windows/-/electron-builder-squirrel-windows-22.10.5.tgz"; - sha1 = "83d3bf498110341a522cc5263fb4474ae6e05caf"; + name = "electron_builder_squirrel_windows___electron_builder_squirrel_windows_22.11.4.tgz"; + url = "https://registry.yarnpkg.com/electron-builder-squirrel-windows/-/electron-builder-squirrel-windows-22.11.4.tgz"; + sha1 = "6dc50a26396d813f58a4d8e5b90ee3cedb56f4d8"; }; } { - name = "electron_builder___electron_builder_22.10.5.tgz"; + name = "electron_builder___electron_builder_22.11.4.tgz"; path = fetchurl { - name = "electron_builder___electron_builder_22.10.5.tgz"; - url = "https://registry.yarnpkg.com/electron-builder/-/electron-builder-22.10.5.tgz"; - sha1 = "03b156b93e6012609027c3aaa69201a3ad21e454"; + name = "electron_builder___electron_builder_22.11.4.tgz"; + url = "https://registry.yarnpkg.com/electron-builder/-/electron-builder-22.11.4.tgz"; + sha1 = "aadb57a4fc90863e82ebdbc66131400fc3bb4c82"; }; } { @@ -1970,11 +1986,11 @@ }; } { - name = "electron_publish___electron_publish_22.10.5.tgz"; + name = "electron_publish___electron_publish_22.11.4.tgz"; path = fetchurl { - name = "electron_publish___electron_publish_22.10.5.tgz"; - url = "https://registry.yarnpkg.com/electron-publish/-/electron-publish-22.10.5.tgz"; - sha1 = "9cbe46266b6c79d8c6e99840755682e2262d3543"; + name = "electron_publish___electron_publish_22.11.4.tgz"; + url = "https://registry.yarnpkg.com/electron-publish/-/electron-publish-22.11.4.tgz"; + sha1 = "0f526edb7e0c3f0155103ff3b8a2e363a3a392f1"; }; } { @@ -2010,11 +2026,11 @@ }; } { - name = "encoding___encoding_0.1.12.tgz"; + name = "encoding___encoding_0.1.13.tgz"; path = fetchurl { - name = "encoding___encoding_0.1.12.tgz"; - url = "https://registry.yarnpkg.com/encoding/-/encoding-0.1.12.tgz"; - sha1 = "538b66f3ee62cd1ab51ec323829d1f9480c74beb"; + name = "encoding___encoding_0.1.13.tgz"; + url = "https://registry.yarnpkg.com/encoding/-/encoding-0.1.13.tgz"; + sha1 = "56574afdd791f54a8e9b2785c0582a2d26210fa9"; }; } { @@ -2050,14 +2066,6 @@ }; } { - name = "errlop___errlop_4.1.0.tgz"; - path = fetchurl { - name = "errlop___errlop_4.1.0.tgz"; - url = "https://registry.yarnpkg.com/errlop/-/errlop-4.1.0.tgz"; - sha1 = "8e7b8f4f1bf0a6feafce4d14f0c0cf4bf5ef036b"; - }; - } - { name = "errno___errno_0.1.7.tgz"; path = fetchurl { name = "errno___errno_0.1.7.tgz"; @@ -2474,19 +2482,19 @@ }; } { - name = "fs_extra___fs_extra_8.1.0.tgz"; + name = "fs_extra___fs_extra_10.0.0.tgz"; path = fetchurl { - name = "fs_extra___fs_extra_8.1.0.tgz"; - url = "https://registry.yarnpkg.com/fs-extra/-/fs-extra-8.1.0.tgz"; - sha1 = "49d43c45a88cd9677668cb7be1b46efdb8d2e1c0"; + name = "fs_extra___fs_extra_10.0.0.tgz"; + url = "https://registry.yarnpkg.com/fs-extra/-/fs-extra-10.0.0.tgz"; + sha1 = "9ff61b655dde53fb34a82df84bb214ce802e17c1"; }; } { - name = "fs_extra___fs_extra_9.0.1.tgz"; + name = "fs_extra___fs_extra_8.1.0.tgz"; path = fetchurl { - name = "fs_extra___fs_extra_9.0.1.tgz"; - url = "https://registry.yarnpkg.com/fs-extra/-/fs-extra-9.0.1.tgz"; - sha1 = "910da0062437ba4c39fedd863f1675ccfefcb9fc"; + name = "fs_extra___fs_extra_8.1.0.tgz"; + url = "https://registry.yarnpkg.com/fs-extra/-/fs-extra-8.1.0.tgz"; + sha1 = "49d43c45a88cd9677668cb7be1b46efdb8d2e1c0"; }; } { @@ -2498,6 +2506,14 @@ }; } { + name = "fs_extra___fs_extra_9.0.1.tgz"; + path = fetchurl { + name = "fs_extra___fs_extra_9.0.1.tgz"; + url = "https://registry.yarnpkg.com/fs-extra/-/fs-extra-9.0.1.tgz"; + sha1 = "910da0062437ba4c39fedd863f1675ccfefcb9fc"; + }; + } + { name = "fs_minipass___fs_minipass_1.2.7.tgz"; path = fetchurl { name = "fs_minipass___fs_minipass_1.2.7.tgz"; @@ -2642,11 +2658,11 @@ }; } { - name = "glob_parent___glob_parent_5.1.1.tgz"; + name = "glob_parent___glob_parent_5.1.2.tgz"; path = fetchurl { - name = "glob_parent___glob_parent_5.1.1.tgz"; - url = "https://registry.yarnpkg.com/glob-parent/-/glob-parent-5.1.1.tgz"; - sha1 = "b6c1ef417c4e5663ea498f1c45afac6916bbc229"; + name = "glob_parent___glob_parent_5.1.2.tgz"; + url = "https://registry.yarnpkg.com/glob-parent/-/glob-parent-5.1.2.tgz"; + sha1 = "869832c58034fe68a4093c17dc15e8340d8401c4"; }; } { @@ -2658,6 +2674,14 @@ }; } { + name = "glob___glob_7.1.7.tgz"; + path = fetchurl { + name = "glob___glob_7.1.7.tgz"; + url = "https://registry.yarnpkg.com/glob/-/glob-7.1.7.tgz"; + sha1 = "3b193e9233f01d42d0b3f78294bbeeb418f94a90"; + }; + } + { name = "global_dirs___global_dirs_0.1.1.tgz"; path = fetchurl { name = "global_dirs___global_dirs_0.1.1.tgz"; @@ -2722,6 +2746,14 @@ }; } { + name = "graceful_fs___graceful_fs_4.2.6.tgz"; + path = fetchurl { + name = "graceful_fs___graceful_fs_4.2.6.tgz"; + url = "https://registry.yarnpkg.com/graceful-fs/-/graceful-fs-4.2.6.tgz"; + sha1 = "ff040b2b0853b23c3d31027523706f1885d76bee"; + }; + } + { name = "graceful_fs___graceful_fs_4.2.4.tgz"; path = fetchurl { name = "graceful_fs___graceful_fs_4.2.4.tgz"; @@ -2810,27 +2842,11 @@ }; } { - name = "hosted_git_info___hosted_git_info_2.8.5.tgz"; - path = fetchurl { - name = "hosted_git_info___hosted_git_info_2.8.5.tgz"; - url = "https://registry.yarnpkg.com/hosted-git-info/-/hosted-git-info-2.8.5.tgz"; - sha1 = "759cfcf2c4d156ade59b0b2dfabddc42a6b9c70c"; - }; - } - { - name = "hosted_git_info___hosted_git_info_2.8.8.tgz"; - path = fetchurl { - name = "hosted_git_info___hosted_git_info_2.8.8.tgz"; - url = "https://registry.yarnpkg.com/hosted-git-info/-/hosted-git-info-2.8.8.tgz"; - sha1 = "7539bd4bc1e0e0a895815a2e0262420b12858488"; - }; - } - { - name = "hosted_git_info___hosted_git_info_3.0.8.tgz"; + name = "hosted_git_info___hosted_git_info_2.8.9.tgz"; path = fetchurl { - name = "hosted_git_info___hosted_git_info_3.0.8.tgz"; - url = "https://registry.yarnpkg.com/hosted-git-info/-/hosted-git-info-3.0.8.tgz"; - sha1 = "6e35d4cc87af2c5f816e4cb9ce350ba87a3f370d"; + name = "hosted_git_info___hosted_git_info_2.8.9.tgz"; + url = "https://registry.yarnpkg.com/hosted-git-info/-/hosted-git-info-2.8.9.tgz"; + sha1 = "dffc0bf9a21c02209090f2aa69429e1414daf3f9"; }; } { @@ -2890,11 +2906,11 @@ }; } { - name = "iconv_corefoundation___iconv_corefoundation_1.1.5.tgz"; + name = "iconv_corefoundation___iconv_corefoundation_1.1.6.tgz"; path = fetchurl { - name = "iconv_corefoundation___iconv_corefoundation_1.1.5.tgz"; - url = "https://registry.yarnpkg.com/iconv-corefoundation/-/iconv-corefoundation-1.1.5.tgz"; - sha1 = "90596d444a579aeb109f5ca113f6bb665a41be2b"; + name = "iconv_corefoundation___iconv_corefoundation_1.1.6.tgz"; + url = "https://registry.yarnpkg.com/iconv-corefoundation/-/iconv-corefoundation-1.1.6.tgz"; + sha1 = "27c135470237f6f8d13462fa1f5eaf250523c29a"; }; } { @@ -2906,11 +2922,11 @@ }; } { - name = "iconv_lite___iconv_lite_0.6.2.tgz"; + name = "iconv_lite___iconv_lite_0.6.3.tgz"; path = fetchurl { - name = "iconv_lite___iconv_lite_0.6.2.tgz"; - url = "https://registry.yarnpkg.com/iconv-lite/-/iconv-lite-0.6.2.tgz"; - sha1 = "ce13d1875b0c3a674bd6a04b7f76b01b1b6ded01"; + name = "iconv_lite___iconv_lite_0.6.3.tgz"; + url = "https://registry.yarnpkg.com/iconv-lite/-/iconv-lite-0.6.3.tgz"; + sha1 = "a52f80bf38da1952eb5c681790719871a1a72501"; }; } { @@ -3122,19 +3138,19 @@ }; } { - name = "is_cidr___is_cidr_3.1.0.tgz"; + name = "is_ci___is_ci_3.0.0.tgz"; path = fetchurl { - name = "is_cidr___is_cidr_3.1.0.tgz"; - url = "https://registry.yarnpkg.com/is-cidr/-/is-cidr-3.1.0.tgz"; - sha1 = "72e233d8e1c4cd1d3f11713fcce3eba7b0e3476f"; + name = "is_ci___is_ci_3.0.0.tgz"; + url = "https://registry.yarnpkg.com/is-ci/-/is-ci-3.0.0.tgz"; + sha1 = "c7e7be3c9d8eef7d0fa144390bd1e4b88dc4c994"; }; } { - name = "is_core_module___is_core_module_2.2.0.tgz"; + name = "is_cidr___is_cidr_3.1.0.tgz"; path = fetchurl { - name = "is_core_module___is_core_module_2.2.0.tgz"; - url = "https://registry.yarnpkg.com/is-core-module/-/is-core-module-2.2.0.tgz"; - sha1 = "97037ef3d52224d85163f5597b2b63d9afed981a"; + name = "is_cidr___is_cidr_3.1.0.tgz"; + url = "https://registry.yarnpkg.com/is-cidr/-/is-cidr-3.1.0.tgz"; + sha1 = "72e233d8e1c4cd1d3f11713fcce3eba7b0e3476f"; }; } { @@ -3330,6 +3346,14 @@ }; } { + name = "isbinaryfile___isbinaryfile_4.0.8.tgz"; + path = fetchurl { + name = "isbinaryfile___isbinaryfile_4.0.8.tgz"; + url = "https://registry.yarnpkg.com/isbinaryfile/-/isbinaryfile-4.0.8.tgz"; + sha1 = "5d34b94865bd4946633ecc78a026fc76c5b11fcf"; + }; + } + { name = "isexe___isexe_2.0.0.tgz"; path = fetchurl { name = "isexe___isexe_2.0.0.tgz"; @@ -3346,14 +3370,6 @@ }; } { - name = "istextorbinary___istextorbinary_5.12.0.tgz"; - path = fetchurl { - name = "istextorbinary___istextorbinary_5.12.0.tgz"; - url = "https://registry.yarnpkg.com/istextorbinary/-/istextorbinary-5.12.0.tgz"; - sha1 = "2f84777838668fdf524c305a2363d6057aaeec84"; - }; - } - { name = "jake___jake_10.8.2.tgz"; path = fetchurl { name = "jake___jake_10.8.2.tgz"; @@ -3394,11 +3410,11 @@ }; } { - name = "js_yaml___js_yaml_4.0.0.tgz"; + name = "js_yaml___js_yaml_4.1.0.tgz"; path = fetchurl { - name = "js_yaml___js_yaml_4.0.0.tgz"; - url = "https://registry.yarnpkg.com/js-yaml/-/js-yaml-4.0.0.tgz"; - sha1 = "f426bc0ff4b4051926cd588c71113183409a121f"; + name = "js_yaml___js_yaml_4.1.0.tgz"; + url = "https://registry.yarnpkg.com/js-yaml/-/js-yaml-4.1.0.tgz"; + sha1 = "c1fb65f8f5017901cdd2c951864ba18458a10602"; }; } { @@ -3482,11 +3498,11 @@ }; } { - name = "json5___json5_2.1.3.tgz"; + name = "json5___json5_2.2.0.tgz"; path = fetchurl { - name = "json5___json5_2.1.3.tgz"; - url = "https://registry.yarnpkg.com/json5/-/json5-2.1.3.tgz"; - sha1 = "c9b0f7fa9233bfe5807fe66fcf3a5617ed597d43"; + name = "json5___json5_2.2.0.tgz"; + url = "https://registry.yarnpkg.com/json5/-/json5-2.2.0.tgz"; + sha1 = "2dfefe720c6ba525d9ebd909950f0515316c89a3"; }; } { @@ -3570,6 +3586,14 @@ }; } { + name = "lazy_val___lazy_val_1.0.5.tgz"; + path = fetchurl { + name = "lazy_val___lazy_val_1.0.5.tgz"; + url = "https://registry.yarnpkg.com/lazy-val/-/lazy-val-1.0.5.tgz"; + sha1 = "6cf3b9f5bc31cee7ee3e369c0832b7583dcd923d"; + }; + } + { name = "lazystream___lazystream_1.0.0.tgz"; path = fetchurl { name = "lazystream___lazystream_1.0.0.tgz"; @@ -4162,11 +4186,11 @@ }; } { - name = "node_fetch_npm___node_fetch_npm_2.0.2.tgz"; + name = "node_fetch_npm___node_fetch_npm_2.0.4.tgz"; path = fetchurl { - name = "node_fetch_npm___node_fetch_npm_2.0.2.tgz"; - url = "https://registry.yarnpkg.com/node-fetch-npm/-/node-fetch-npm-2.0.2.tgz"; - sha1 = "7258c9046182dca345b4208eda918daf33697ff7"; + name = "node_fetch_npm___node_fetch_npm_2.0.4.tgz"; + url = "https://registry.yarnpkg.com/node-fetch-npm/-/node-fetch-npm-2.0.4.tgz"; + sha1 = "6507d0e17a9ec0be3bec516958a497cec54bf5a4"; }; } { @@ -4218,14 +4242,6 @@ }; } { - name = "normalize_package_data___normalize_package_data_3.0.2.tgz"; - path = fetchurl { - name = "normalize_package_data___normalize_package_data_3.0.2.tgz"; - url = "https://registry.yarnpkg.com/normalize-package-data/-/normalize-package-data-3.0.2.tgz"; - sha1 = "cae5c410ae2434f9a6c1baa65d5bc3b9366c8699"; - }; - } - { name = "normalize_path___normalize_path_3.0.0.tgz"; path = fetchurl { name = "normalize_path___normalize_path_3.0.0.tgz"; @@ -4234,11 +4250,11 @@ }; } { - name = "normalize_url___normalize_url_4.5.0.tgz"; + name = "normalize_url___normalize_url_4.5.1.tgz"; path = fetchurl { - name = "normalize_url___normalize_url_4.5.0.tgz"; - url = "https://registry.yarnpkg.com/normalize-url/-/normalize-url-4.5.0.tgz"; - sha1 = "453354087e6ca96957bd8f5baf753f5982142129"; + name = "normalize_url___normalize_url_4.5.1.tgz"; + url = "https://registry.yarnpkg.com/normalize-url/-/normalize-url-4.5.1.tgz"; + sha1 = "0dd90cf1288ee1d1313b87081c9a5932ee48518a"; }; } { @@ -4346,14 +4362,6 @@ }; } { - name = "npm_registry_fetch___npm_registry_fetch_4.0.2.tgz"; - path = fetchurl { - name = "npm_registry_fetch___npm_registry_fetch_4.0.2.tgz"; - url = "https://registry.yarnpkg.com/npm-registry-fetch/-/npm-registry-fetch-4.0.2.tgz"; - sha1 = "2b1434f93ccbe6b6385f8e45f45db93e16921d7a"; - }; - } - { name = "npm_registry_fetch___npm_registry_fetch_4.0.7.tgz"; path = fetchurl { name = "npm_registry_fetch___npm_registry_fetch_4.0.7.tgz"; @@ -5026,11 +5034,11 @@ }; } { - name = "read_config_file___read_config_file_6.0.0.tgz"; + name = "read_config_file___read_config_file_6.2.0.tgz"; path = fetchurl { - name = "read_config_file___read_config_file_6.0.0.tgz"; - url = "https://registry.yarnpkg.com/read-config-file/-/read-config-file-6.0.0.tgz"; - sha1 = "224b5dca6a5bdc1fb19e63f89f342680efdb9299"; + name = "read_config_file___read_config_file_6.2.0.tgz"; + url = "https://registry.yarnpkg.com/read-config-file/-/read-config-file-6.2.0.tgz"; + sha1 = "71536072330bcd62ba814f91458b12add9fc7ade"; }; } { @@ -5234,14 +5242,6 @@ }; } { - name = "resolve___resolve_1.20.0.tgz"; - path = fetchurl { - name = "resolve___resolve_1.20.0.tgz"; - url = "https://registry.yarnpkg.com/resolve/-/resolve-1.20.0.tgz"; - sha1 = "629a013fb3f70755d6f0b7935cc1c2c5378b1975"; - }; - } - { name = "responselike___responselike_1.0.2.tgz"; path = fetchurl { name = "responselike___responselike_1.0.2.tgz"; @@ -5290,11 +5290,11 @@ }; } { - name = "safe_buffer___safe_buffer_5.2.0.tgz"; + name = "safe_buffer___safe_buffer_5.2.1.tgz"; path = fetchurl { - name = "safe_buffer___safe_buffer_5.2.0.tgz"; - url = "https://registry.yarnpkg.com/safe-buffer/-/safe-buffer-5.2.0.tgz"; - sha1 = "b74daec49b1148f88c64b68d49b1e815c1f2f519"; + name = "safe_buffer___safe_buffer_5.2.1.tgz"; + url = "https://registry.yarnpkg.com/safe-buffer/-/safe-buffer-5.2.1.tgz"; + sha1 = "1eaf9fa9bdb1fdd4ec75f58f9cdb4e6b7827eec6"; }; } { @@ -5306,14 +5306,6 @@ }; } { - name = "safe_buffer___safe_buffer_5.2.1.tgz"; - path = fetchurl { - name = "safe_buffer___safe_buffer_5.2.1.tgz"; - url = "https://registry.yarnpkg.com/safe-buffer/-/safe-buffer-5.2.1.tgz"; - sha1 = "1eaf9fa9bdb1fdd4ec75f58f9cdb4e6b7827eec6"; - }; - } - { name = "safer_buffer___safer_buffer_2.1.2.tgz"; path = fetchurl { name = "safer_buffer___safer_buffer_2.1.2.tgz"; @@ -5386,6 +5378,14 @@ }; } { + name = "semver___semver_7.3.5.tgz"; + path = fetchurl { + name = "semver___semver_7.3.5.tgz"; + url = "https://registry.yarnpkg.com/semver/-/semver-7.3.5.tgz"; + sha1 = "0b621c879348d8998e4b0e4be94b3f12e6018ef7"; + }; + } + { name = "set_blocking___set_blocking_2.0.0.tgz"; path = fetchurl { name = "set_blocking___set_blocking_2.0.0.tgz"; @@ -5842,11 +5842,11 @@ }; } { - name = "temp_file___temp_file_3.3.7.tgz"; + name = "temp_file___temp_file_3.4.0.tgz"; path = fetchurl { - name = "temp_file___temp_file_3.3.7.tgz"; - url = "https://registry.yarnpkg.com/temp-file/-/temp-file-3.3.7.tgz"; - sha1 = "686885d635f872748e384e871855958470aeb18a"; + name = "temp_file___temp_file_3.4.0.tgz"; + url = "https://registry.yarnpkg.com/temp-file/-/temp-file-3.4.0.tgz"; + sha1 = "766ea28911c683996c248ef1a20eea04d51652c7"; }; } { @@ -5866,14 +5866,6 @@ }; } { - name = "textextensions___textextensions_5.12.0.tgz"; - path = fetchurl { - name = "textextensions___textextensions_5.12.0.tgz"; - url = "https://registry.yarnpkg.com/textextensions/-/textextensions-5.12.0.tgz"; - sha1 = "b908120b5c1bd4bb9eba41423d75b176011ab68a"; - }; - } - { name = "through2___through2_2.0.5.tgz"; path = fetchurl { name = "through2___through2_2.0.5.tgz"; @@ -5930,6 +5922,14 @@ }; } { + name = "tmp_promise___tmp_promise_3.0.2.tgz"; + path = fetchurl { + name = "tmp_promise___tmp_promise_3.0.2.tgz"; + url = "https://registry.yarnpkg.com/tmp-promise/-/tmp-promise-3.0.2.tgz"; + sha1 = "6e933782abff8b00c3119d63589ca1fb9caaa62a"; + }; + } + { name = "tmp___tmp_0.1.0.tgz"; path = fetchurl { name = "tmp___tmp_0.1.0.tgz"; @@ -5938,6 +5938,14 @@ }; } { + name = "tmp___tmp_0.2.1.tgz"; + path = fetchurl { + name = "tmp___tmp_0.2.1.tgz"; + url = "https://registry.yarnpkg.com/tmp/-/tmp-0.2.1.tgz"; + sha1 = "8457fc3037dcf4719c251367a1af6500ee1ccf14"; + }; + } + { name = "to_fast_properties___to_fast_properties_2.0.0.tgz"; path = fetchurl { name = "to_fast_properties___to_fast_properties_2.0.0.tgz"; @@ -6282,22 +6290,6 @@ }; } { - name = "version_compare___version_compare_1.1.0.tgz"; - path = fetchurl { - name = "version_compare___version_compare_1.1.0.tgz"; - url = "https://registry.yarnpkg.com/version-compare/-/version-compare-1.1.0.tgz"; - sha1 = "7b3e67e7e6cec5c72d9c9e586f8854e419ade17c"; - }; - } - { - name = "version_range___version_range_1.1.0.tgz"; - path = fetchurl { - name = "version_range___version_range_1.1.0.tgz"; - url = "https://registry.yarnpkg.com/version-range/-/version-range-1.1.0.tgz"; - sha1 = "1c233064202ee742afc9d56e21da3b2e15260acf"; - }; - } - { name = "walk___walk_2.3.14.tgz"; path = fetchurl { name = "walk___walk_2.3.14.tgz"; @@ -6514,19 +6506,19 @@ }; } { - name = "y18n___y18n_3.2.1.tgz"; + name = "y18n___y18n_3.2.2.tgz"; path = fetchurl { - name = "y18n___y18n_3.2.1.tgz"; - url = "https://registry.yarnpkg.com/y18n/-/y18n-3.2.1.tgz"; - sha1 = "6d15fba884c08679c0d77e88e7759e811e07fa41"; + name = "y18n___y18n_3.2.2.tgz"; + url = "https://registry.yarnpkg.com/y18n/-/y18n-3.2.2.tgz"; + sha1 = "85c901bd6470ce71fc4bb723ad209b70f7f28696"; }; } { - name = "y18n___y18n_4.0.0.tgz"; + name = "y18n___y18n_4.0.3.tgz"; path = fetchurl { - name = "y18n___y18n_4.0.0.tgz"; - url = "https://registry.yarnpkg.com/y18n/-/y18n-4.0.0.tgz"; - sha1 = "95ef94f85ecc81d007c264e190a120f0a3c8566b"; + name = "y18n___y18n_4.0.3.tgz"; + url = "https://registry.yarnpkg.com/y18n/-/y18n-4.0.3.tgz"; + sha1 = "b5f259c82cd6e336921efd7bfd8bf560de9eeedf"; }; } { @@ -6602,11 +6594,11 @@ }; } { - name = "yargs___yargs_16.2.0.tgz"; + name = "yargs___yargs_17.0.1.tgz"; path = fetchurl { - name = "yargs___yargs_16.2.0.tgz"; - url = "https://registry.yarnpkg.com/yargs/-/yargs-16.2.0.tgz"; - sha1 = "1c82bf0f6b6a66eafce7ef30e376f49a12477f66"; + name = "yargs___yargs_17.0.1.tgz"; + url = "https://registry.yarnpkg.com/yargs/-/yargs-17.0.1.tgz"; + sha1 = "6a1ced4ed5ee0b388010ba9fd67af83b9362e0bb"; }; } { diff --git a/pkgs/applications/networking/instant-messengers/element/element-desktop.nix b/pkgs/applications/networking/instant-messengers/element/element-desktop.nix index 6424972cbf7..f8f4d31d6ec 100644 --- a/pkgs/applications/networking/instant-messengers/element/element-desktop.nix +++ b/pkgs/applications/networking/instant-messengers/element/element-desktop.nix @@ -8,12 +8,12 @@ let executableName = "element-desktop"; - version = "1.7.30"; + version = "1.7.31"; src = fetchFromGitHub { owner = "vector-im"; repo = "element-desktop"; rev = "v${version}"; - sha256 = "09k1xxmzqvw8c1x9ndsdvwj4598rdx9zqraz3rmr3i58s51vycxp"; + sha256 = "14vyqzf69g4n3i7qjm1pgq2kwym6cira0jwvirzdrwxkfsl0dsq6"; }; in mkYarnPackage rec { name = "element-desktop-${version}"; diff --git a/pkgs/applications/networking/instant-messengers/element/element-web.nix b/pkgs/applications/networking/instant-messengers/element/element-web.nix index 5baed75ba52..d9aec35b04b 100644 --- a/pkgs/applications/networking/instant-messengers/element/element-web.nix +++ b/pkgs/applications/networking/instant-messengers/element/element-web.nix @@ -12,11 +12,11 @@ let in stdenv.mkDerivation rec { pname = "element-web"; - version = "1.7.30"; + version = "1.7.31"; src = fetchurl { url = "https://github.com/vector-im/element-web/releases/download/v${version}/element-v${version}.tar.gz"; - sha256 = "1pnmgdyacxfk8hdf930rqqvqrcvckc3m4pb5mkznlirsmw06nfay"; + sha256 = "1p0vg5bkri7qiqv5yic56hjjbb5zvhvyzsm5zi7fx3yb7zdxmr3f"; }; installPhase = '' diff --git a/pkgs/applications/science/math/programmer-calculator/default.nix b/pkgs/applications/science/math/programmer-calculator/default.nix new file mode 100644 index 00000000000..0238e533357 --- /dev/null +++ b/pkgs/applications/science/math/programmer-calculator/default.nix @@ -0,0 +1,34 @@ +{ lib, gccStdenv, fetchFromGitHub, ncurses }: + +gccStdenv.mkDerivation rec { + pname = "programmer-calculator"; + version = "2.1"; + + src = fetchFromGitHub { + owner = "alt-romes"; + repo = pname; + rev = "v${version}"; + sha256 = "1vvpbj24ijl9ma0h669n9x0z1im3vqdf8zf2li0xf5h97b14gmv0"; + }; + + buildInputs = [ ncurses ]; + + installPhase = '' + runHook preInstall + install -Dm 555 pcalc -t "$out/bin" + runHook postInstall + ''; + + meta = with lib; { + description = "A terminal calculator for programmers"; + longDescription = '' + Terminal calculator made for programmers working with multiple number + representations, sizes, and overall close to the bits + ''; + homepage = "https://alt-romes.github.io/programmer-calculator"; + changelog = "https://github.com/alt-romes/programmer-calculator/releases/tag/v${version}"; + license = licenses.gpl3Only; + maintainers = with lib.maintainers; [ cjab ]; + platforms = platforms.all; + }; +} diff --git a/pkgs/applications/version-management/gitolite/default.nix b/pkgs/applications/version-management/gitolite/default.nix index 8dd2766ff0e..e9712a859d7 100644 --- a/pkgs/applications/version-management/gitolite/default.nix +++ b/pkgs/applications/version-management/gitolite/default.nix @@ -1,4 +1,4 @@ -{ stdenv, fetchFromGitHub, git, lib, makeWrapper, nettools, perl }: +{ stdenv, fetchFromGitHub, git, lib, makeWrapper, nettools, perl, perlPackages }: stdenv.mkDerivation rec { pname = "gitolite"; @@ -29,7 +29,7 @@ stdenv.mkDerivation rec { postFixup = '' wrapProgram $out/bin/gitolite-shell \ - --prefix PATH : ${lib.makeBinPath [ git perl ]} + --prefix PATH : ${lib.makeBinPath [ git (perl.withPackages (p: [ p.JSON ])) ]} ''; installPhase = '' diff --git a/pkgs/data/fonts/open-fonts/default.nix b/pkgs/data/fonts/open-fonts/default.nix new file mode 100644 index 00000000000..e503b114303 --- /dev/null +++ b/pkgs/data/fonts/open-fonts/default.nix @@ -0,0 +1,28 @@ +{ lib, fetchurl }: + +let + pname = "open-fonts"; + version = "0.7.0"; +in +fetchurl { + name = "${pname}-${version}"; + + url = "https://github.com/kiwi0fruit/open-fonts/releases/download/${version}/open-fonts.tar.xz"; + downloadToTemp = true; + recursiveHash = true; + sha256 = "sha256-bSP9Flotoo3E5vRU3eKOUAPD2fmkWseWYWG4y0S07+4="; + + postFetch = '' + tar xf $downloadedFile + mkdir -p $out/share/fonts/truetype + install open-fonts/*.ttf $out/share/fonts/truetype + ''; + + meta = with lib; { + description = "A collection of beautiful free and open source fonts"; + homepage = "https://github.com/kiwi0fruit/open-fonts"; + license = licenses.mit; + platforms = platforms.all; + maintainers = with maintainers; [ fortuneteller2k ]; + }; +} diff --git a/pkgs/data/fonts/twemoji-color-font/default.nix b/pkgs/data/fonts/twemoji-color-font/default.nix index a2fde6813b7..ae1d3f9927f 100644 --- a/pkgs/data/fonts/twemoji-color-font/default.nix +++ b/pkgs/data/fonts/twemoji-color-font/default.nix @@ -5,20 +5,20 @@ stdenv.mkDerivation rec { pname = "twemoji-color-font"; - version = "13.0.1"; + version = "13.1.0"; # We fetch the prebuilt font because building it takes 1.5 hours on hydra. # Relevant issue: https://github.com/NixOS/nixpkgs/issues/97871 src = fetchurl { url = "https://github.com/eosrei/twemoji-color-font/releases/download/v${version}/TwitterColorEmoji-SVGinOT-Linux-${version}.tar.gz"; - sha256 = "1mn2cb6a3v0q8i81s9a8bk49nbwxq91n6ki7827i7rhjkncb0mbn"; + sha256 = "sha256-V8DWUUAK+HLDPcq3izPs174PfUnaSeLByDpZwhUIX5Q="; }; dontBuild = true; installPhase = '' install -Dm755 TwitterColorEmoji-SVGinOT.ttf $out/share/fonts/truetype/TwitterColorEmoji-SVGinOT.ttf - install -Dm644 fontconfig/56-twemoji-color.conf $out/etc/fonts/conf.d/56-twemoji-color.conf + install -Dm644 fontconfig/46-twemoji-color.conf $out/etc/fonts/conf.d/46-twemoji-color.conf ''; meta = with lib; { diff --git a/pkgs/data/misc/hackage/pin.json b/pkgs/data/misc/hackage/pin.json index 3fc3fc21e47..8a8cfa74d70 100644 --- a/pkgs/data/misc/hackage/pin.json +++ b/pkgs/data/misc/hackage/pin.json @@ -1,6 +1,6 @@ { - "commit": "7708395682f798fe3649bd05387ab571fcf8890c", - "url": "https://github.com/commercialhaskell/all-cabal-hashes/archive/7708395682f798fe3649bd05387ab571fcf8890c.tar.gz", - "sha256": "0pfv9nmccp9q6p77lmyh8jqkvq1ad392zyy72g8y6kdsgy71nir5", - "msg": "Update from Hackage at 2021-06-12T16:23:24Z" + "commit": "8005ce7c7ba90fa92db65f86c544623353a96cf8", + "url": "https://github.com/commercialhaskell/all-cabal-hashes/archive/8005ce7c7ba90fa92db65f86c544623353a96cf8.tar.gz", + "sha256": "1kzhh7h0csb0vh9avbjsm6hziaa3lbpmzp4pkij4s3bbl4l664aa", + "msg": "Update from Hackage at 2021-06-22T07:13:30Z" } diff --git a/pkgs/development/haskell-modules/configuration-arm.nix b/pkgs/development/haskell-modules/configuration-arm.nix index b9f868b04ca..550b976a5cf 100644 --- a/pkgs/development/haskell-modules/configuration-arm.nix +++ b/pkgs/development/haskell-modules/configuration-arm.nix @@ -43,50 +43,52 @@ self: super: { # Doctests fail on aarch64 due to a GHCi linking bug # https://gitlab.haskell.org/ghc/ghc/-/issues/15275#note_295437 # TODO: figure out if needed on aarch32 as well - language-nix = dontCheck super.language-nix; - trifecta = dontCheck super.trifecta; - ad = dontCheck super.ad; - vinyl = dontCheck super.vinyl; BNFC = dontCheck super.BNFC; C-structs = dontCheck super.C-structs; accelerate = dontCheck super.accelerate; - focuslist = dontCheck super.focuslist; - flight-kml = dontCheck super.flight-kml; - exact-real = dontCheck super.exact-real; + ad = dontCheck super.ad; autoapply = dontCheck super.autoapply; - hint = dontCheck super.hint; - hgeometry = dontCheck super.hgeometry; - headroom = dontCheck super.headroom; + construct = dontCheck super.construct; + exact-real = dontCheck super.exact-real; + flight-kml = dontCheck super.flight-kml; + focuslist = dontCheck super.focuslist; + grammatical-parsers = dontCheck super.grammatical-parsers; + greskell = dontCheck super.greskell; + groupBy = dontCheck super.groupBy; haskell-time-range = dontCheck super.haskell-time-range; + headroom = dontCheck super.headroom; + hgeometry = dontCheck super.hgeometry; + hhp = dontCheck super.hhp; + hint = dontCheck super.hint; + hls-splice-plugin = dontCheck super.hls-splice-plugin; hsakamai = dontCheck super.hsakamai; hsemail-ns = dontCheck super.hsemail-ns; - openapi3 = dontCheck super.openapi3; - strict-writer = dontCheck super.strict-writer; - xml-html-qq = dontCheck super.xml-html-qq; - static = dontCheck super.static; - hhp = dontCheck super.hhp; - groupBy = dontCheck super.groupBy; - greskell = dontCheck super.greskell; html-validator-cli = dontCheck super.html-validator-cli; hw-fingertree-strict = dontCheck super.hw-fingertree-strict; - hw-prim = dontCheck super.hw-prim; hw-packed-vector = dontCheck super.hw-packed-vector; + hw-prim = dontCheck super.hw-prim; hw-xml = dontCheck super.hw-xml; + language-nix = dontCheck super.language-nix; lens-regex = dontCheck super.lens-regex; meep = dontCheck super.meep; + openapi3 = dontCheck super.openapi3; + orbits = dontCheck super.orbits; ranged-list = dontCheck super.ranged-list; rank2classes = dontCheck super.rank2classes; schedule = dontCheck super.schedule; + static = dontCheck super.static; + strict-writer = dontCheck super.strict-writer; + termonad = dontCheck super.termonad; + trifecta = dontCheck super.trifecta; twiml = dontCheck super.twiml; twitter-conduit = dontCheck super.twitter-conduit; validationt = dontCheck super.validationt; vgrep = dontCheck super.vgrep; + vinyl = dontCheck super.vinyl; vulkan-utils = dontCheck super.vulkan-utils; + xml-html-qq = dontCheck super.xml-html-qq; yaml-combinators = dontCheck super.yaml-combinators; yesod-paginator = dontCheck super.yesod-paginator; - grammatical-parsers = dontCheck super.grammatical-parsers; - construct = dontCheck super.construct; - orbits = dontCheck super.orbits; # https://github.com/ekmett/half/issues/35 half = dontCheck super.half; diff --git a/pkgs/development/haskell-modules/configuration-common.nix b/pkgs/development/haskell-modules/configuration-common.nix index 0d9d65af01c..1c3cbbbbe31 100644 --- a/pkgs/development/haskell-modules/configuration-common.nix +++ b/pkgs/development/haskell-modules/configuration-common.nix @@ -64,7 +64,14 @@ self: super: { name = "git-annex-${super.git-annex.version}-src"; url = "git://git-annex.branchable.com/"; rev = "refs/tags/" + super.git-annex.version; - sha256 = "1wig8nw2rxgq86y88m1f1qf93z5yckidf1cs33ribmhqa1hs300p"; + sha256 = "1hf2i36ayscdg7fa81akx031chg8c3scbjphj4c1qawif41bynmm"; + # delete android and Android directories which cause issues on + # darwin (case insensitive directory). Since we don't need them + # during the build process, we can delete it to prevent a hash + # mismatch on darwin. + postFetch = '' + rm -r $out/doc/?ndroid* + ''; }; }).override { dbus = if pkgs.stdenv.isLinux then self.dbus else null; @@ -478,10 +485,11 @@ self: super: { doctest-discover = dontCheck super.doctest-discover; # Depends on itself for testing - tasty-discover = addBuildTool super.tasty-discover - (if pkgs.buildPlatform != pkgs.hostPlatform - then self.buildHaskellPackages.tasty-discover - else dontCheck super.tasty-discover); + tasty-discover = overrideCabal super.tasty-discover (drv: { + preBuild = '' + export PATH="$PWD/dist/build/tasty-discover:$PATH" + '' + (drv.preBuild or ""); + }); # Known issue with nondeterministic test suite failure # https://github.com/nomeata/tasty-expected-failure/issues/21 @@ -563,7 +571,7 @@ self: super: { preCheck = "export HOME=$TMPDIR"; testToolDepends = drv.testToolDepends or [] ++ [self.cabal-install]; doCheck = false; # https://github.com/kazu-yamamoto/ghc-mod/issues/335 - executableToolDepends = drv.executableToolDepends or [] ++ [pkgs.emacs]; + executableToolDepends = drv.executableToolDepends or [] ++ [pkgs.buildPackages.emacs]; postInstall = '' local lispdir=( "$data/share/${self.ghc.name}/*/${drv.pname}-${drv.version}/elisp" ) make -C $lispdir @@ -705,20 +713,14 @@ self: super: { # The tests spuriously fail libmpd = dontCheck super.libmpd; - # 2021-03-12: All of this libraries have to restrictive upper bounds - # https://github.com/diagrams/diagrams-core/issues/112 - # https://github.com/diagrams/diagrams-cairo/issues/77 - # https://github.com/diagrams/diagrams-rasterific/issues/63 - # https://github.com/diagrams/diagrams-cairo/issues/77 - active = doJailbreak super.active; - statestack = doJailbreak super.statestack; - force-layout = doJailbreak super.force-layout; + # Too strict bounds on template-haskell (doesn't allow 2.16) + # For 2.17 support: https://github.com/JonasDuregard/sized-functors/pull/10 size-based = doJailbreak super.size-based; + + # Remove as soon as we update to monoid-extras 0.6 and unpin these packages dual-tree = doJailbreak super.dual-tree; diagrams-core = doJailbreak super.diagrams-core; - diagrams-postscript = doJailbreak super.diagrams-postscript; - diagrams-svg = doJailbreak super.diagrams-svg; - diagrams-contrib = doJailbreak super.diagrams-contrib; + # Apply patch from master to add compat with optparse-applicative >= 0.16. # We unfortunately can't upgrade to 1.4.4 which includes this patch yet # since it would require monoid-extras 0.6 which breaks other diagrams libs. @@ -728,8 +730,6 @@ self: super: { sha256 = "0xqvzh3ip9i0nv8xnh41afxki64r259pxq8ir1a4v99ggnldpjaa"; includes = [ "*/CmdLine.hs" ]; })); - diagrams-rasterific = doJailbreak super.diagrams-rasterific; - diagrams-cairo = doJailbreak super.diagrams-cairo; # https://github.com/diagrams/diagrams-solve/issues/4 diagrams-solve = dontCheck super.diagrams-solve; @@ -764,7 +764,7 @@ self: super: { # $PATH. Also, cryptol needs a version of sbl that's newer than what we have # in LTS-13.x. cryptol = overrideCabal super.cryptol (drv: { - buildTools = drv.buildTools or [] ++ [ pkgs.makeWrapper ]; + buildTools = drv.buildTools or [] ++ [ pkgs.buildPackages.makeWrapper ]; postInstall = drv.postInstall or "" + '' for b in $out/bin/cryptol $out/bin/cryptol-html; do wrapProgram $b --prefix 'PATH' ':' "${pkgs.lib.getBin pkgs.z3}/bin" @@ -787,7 +787,10 @@ self: super: { # Needs pginit to function and pgrep to verify. tmp-postgres = overrideCabal super.tmp-postgres (drv: { - libraryToolDepends = drv.libraryToolDepends or [] ++ [pkgs.postgresql]; + preCheck = '' + export HOME="$TMPDIR" + '' + (drv.preCheck or ""); + libraryToolDepends = drv.libraryToolDepends or [] ++ [pkgs.buildPackages.postgresql]; testToolDepends = drv.testToolDepends or [] ++ [pkgs.procps]; }); @@ -1168,6 +1171,11 @@ self: super: { url = "https://github.com/jaspervdj/hakyll/commit/af9e29b5456c105dc948bc46c93e989a650b5ed1.patch"; sha256 = "sha256-ghc0V5L9OybNHWKmM0vhjRBN2rIvDlp+ClcK/aQst44="; }) + # Remove when Hakyll > 4.14.0.0 + (pkgs.fetchpatch { + url = "https://github.com/jaspervdj/hakyll/commit/e0c63558a82ac4347181d5d77dce7f763a1db410.patch"; + sha256 = "sha256-wYlxJmq56YQ29vpVsQhO+JdL0GBezCAfkdhIdFnLYsc="; + }) ]; })); @@ -1196,7 +1204,7 @@ self: super: { EdisonAPI = appendPatch super.EdisonAPI (pkgs.fetchpatch { url = "https://github.com/robdockins/edison/pull/16/commits/8da6c0f7d8666766e2f0693425c347c0adb492dc.patch"; postFetch = '' - ${pkgs.patchutils}/bin/filterdiff --include='a/edison-api/*' --strip=1 "$out" > "$tmpfile" + ${pkgs.buildPackages.patchutils}/bin/filterdiff --include='a/edison-api/*' --strip=1 "$out" > "$tmpfile" mv "$tmpfile" "$out" ''; sha256 = "0yi5pz039lcm4pl9xnl6krqxyqq5rgb5b6m09w0sfy06x0n4x213"; @@ -1205,7 +1213,7 @@ self: super: { EdisonCore = appendPatch super.EdisonCore (pkgs.fetchpatch { url = "https://github.com/robdockins/edison/pull/16/commits/8da6c0f7d8666766e2f0693425c347c0adb492dc.patch"; postFetch = '' - ${pkgs.patchutils}/bin/filterdiff --include='a/edison-core/*' --strip=1 "$out" > "$tmpfile" + ${pkgs.buildPackages.patchutils}/bin/filterdiff --include='a/edison-core/*' --strip=1 "$out" > "$tmpfile" mv "$tmpfile" "$out" ''; sha256 = "097wqn8hxsr50b9mhndg5pjim5jma2ym4ylpibakmmb5m98n17zp"; @@ -1284,36 +1292,15 @@ self: super: { # Fixed upstream but not released to Hackage yet: # https://github.com/k0001/hs-libsodium/issues/2 libsodium = overrideCabal super.libsodium (drv: { - libraryToolDepends = (drv.libraryToolDepends or []) ++ [self.c2hs]; + libraryToolDepends = (drv.libraryToolDepends or []) ++ [self.buildHaskellPackages.c2hs]; }); # https://github.com/kowainik/policeman/issues/57 policeman = doJailbreak super.policeman; - # nixpkgs has bumped gdkpixbuf C lib, so we need gi-gdkpixbuf_2_0_26 to link against that. - # This leads to all this bumps which can be removed once stackage has haskell-gi 0.25. - haskell-gi = self.haskell-gi_0_25_0; - haskell-gi-base = addBuildDepends super.haskell-gi-base_0_25_0 [ pkgs.gobject-introspection ]; - gi-glib = self.gi-glib_2_0_25; - gi-cairo = self.gi-cairo_1_0_25; - gi-gobject = self.gi-gobject_2_0_26; - gi-atk = self.gi-atk_2_0_23; - gi-gio = self.gi-gio_2_0_28; - gi-harfbuzz = self.gi-harfbuzz_0_0_4; - gi-javascriptcore = self.gi-javascriptcore_4_0_23; - gi-pango = self.gi-pango_1_0_24; - gi-soup = self.gi-soup_2_4_24; - gi-gdkpixbuf = self.gi-gdkpixbuf_2_0_26; - gi-gdk = self.gi-gdk_3_0_24; - gi-gtk = self.gi-gtk_3_0_37; - gi-webkit2 = self.gi-webkit2_4_0_27; + # Too strict version bounds on haskell-gi gi-cairo-render = doJailbreak super.gi-cairo-render; gi-cairo-connector = doJailbreak super.gi-cairo-connector; - gi-gtk-hs = self.gi-gtk-hs_0_3_10; - gi-dbusmenu = self.gi-dbusmenu_0_4_9; - gi-xlib = self.gi-xlib_2_0_10; - gi-gdkx11 = self.gi-gdkx11_3_0_11; - gi-dbusmenugtk3 = self.gi-dbusmenugtk3_0_4_10; # Missing -Iinclude parameter to doc-tests (pull has been accepted, so should be resolved when 0.5.3 released) # https://github.com/lehins/massiv/pull/104 @@ -1398,7 +1385,7 @@ self: super: { update-nix-fetchgit = let deps = [ pkgs.git pkgs.nix pkgs.nix-prefetch-git ]; in generateOptparseApplicativeCompletion "update-nix-fetchgit" (overrideCabal (addTestToolDepends super.update-nix-fetchgit deps) (drv: { - buildTools = drv.buildTools or [ ] ++ [ pkgs.makeWrapper ]; + buildTools = drv.buildTools or [ ] ++ [ pkgs.buildPackages.makeWrapper ]; postInstall = drv.postInstall or "" + '' wrapProgram "$out/bin/update-nix-fetchgit" --prefix 'PATH' ':' "${ pkgs.lib.makeBinPath deps @@ -1415,39 +1402,16 @@ self: super: { # https://github.com/haskell/haskell-language-server/issues/611 haskell-language-server = dontCheck super.haskell-language-server; - # 2021-05-08: Tests fail: https://github.com/haskell/haskell-language-server/issues/1808 - hls-splice-plugin = dontCheck super.hls-splice-plugin; - # 2021-05-08: Tests fail: https://github.com/haskell/haskell-language-server/issues/1809 hls-eval-plugin = dontCheck super.hls-eval-plugin; - # 2021-03-19: Too restrictive upper bound on optparse-applicative - stylish-haskell = doJailbreak super.stylish-haskell; - - # 2021-03-19: https://github.com/facebookincubator/retrie/issues/24 - retrie = doJailbreak super.retrie; - - # Jailbreak because of restrictive upper bound on base16-bytestring - # 2021-03-19: https://github.com/Avi-D-coder/implicit-hie-cradle/pull/8 - implicit-hie-cradle = doJailbreak super.implicit-hie-cradle; + # 2021-06-20: Tests fail: https://github.com/haskell/haskell-language-server/issues/1949 + hls-refine-imports-plugin = dontCheck super.hls-refine-imports-plugin; # 2021-03-09: Golden tests seem to be missing in hackage release: # https://github.com/haskell/haskell-language-server/issues/1536 hls-tactics-plugin = dontCheck (super.hls-tactics-plugin.override { refinery = self.refinery_0_3_0_0; }); - # 2021-03-24: hlint 3.3 is for ghc 9 compat, but hls only supports ghc 8.10 - hls-hlint-plugin = super.hls-hlint-plugin.override { - hlint = super.hlint_3_2_7; - }; - - # hlint 3.3 needs a ghc-lib-parser newer than the one from stackage - hlint = super.hlint.overrideScope (self: super: { - ghc-lib-parser = overrideCabal self.ghc-lib-parser_9_0_1_20210324 { - doHaddock = false; - }; - ghc-lib-parser-ex = self.ghc-lib-parser-ex_9_0_0_4; - }); - # 2021-03-21 Test hangs # https://github.com/haskell/haskell-language-server/issues/1562 # Jailbreak because of: https://github.com/haskell/haskell-language-server/pull/1595 @@ -1509,8 +1473,6 @@ self: super: { # 2020-11-19: Jailbreaking until: https://github.com/snapframework/snap/pull/219 snap = doJailbreak super.snap; - cachix = generateOptparseApplicativeCompletion "cachix" super.cachix; - # 2020-11-23: Jailbreaking until: https://github.com/michaelt/text-pipes/pull/29 pipes-text = doJailbreak super.pipes-text; @@ -1524,20 +1486,7 @@ self: super: { # Upstream issue: https://github.com/haskell-servant/servant-swagger/issues/129 servant-swagger = dontCheck super.servant-swagger; - hercules-ci-agent = super.hercules-ci-agent.override { - cachix = - # https://github.com/cachix/cachix/pull/361 - (appendPatch - (addBuildDepend super.cachix super.hercules-ci-cnix-store) - (pkgs.fetchpatch { - name = "cachix-361.patch"; - url = "https://patch-diff.githubusercontent.com/raw/cachix/cachix/pull/361.patch"; - sha256 = "0wwlcpmnqmvk1css5f723dzgjvg4jr7i58ifhni5zg9h5iwycdfr"; - stripLen = 1; - includes = ["*.cabal" "*.hs"]; - }) - ); - }; + hercules-ci-agent = generateOptparseApplicativeCompletion "hercules-ci-agent" super.hercules-ci-agent; hercules-ci-cli = generateOptparseApplicativeCompletion "hci" ( # See hercules-ci-optparse-applicative in non-hackage-packages.nix. @@ -1649,7 +1598,7 @@ self: super: { feed = dontCheck super.feed; spacecookie = overrideCabal super.spacecookie (old: { - buildTools = (old.buildTools or []) ++ [ pkgs.installShellFiles ]; + buildTools = (old.buildTools or []) ++ [ pkgs.buildPackages.installShellFiles ]; # let testsuite discover the resulting binary preCheck = '' export SPACECOOKIE_TEST_BIN=./dist/build/spacecookie/spacecookie @@ -1921,7 +1870,7 @@ EOT ] ++ (drv.patches or []); # fix line endings preventing patch from applying prePatch = '' - ${pkgs.dos2unix}/bin/dos2unix hashable.cabal + ${pkgs.buildPackages.dos2unix}/bin/dos2unix hashable.cabal '' + (drv.prePatch or ""); }); @@ -1958,8 +1907,11 @@ EOT # Bounds on profunctors are too strict # https://github.com/ConferOpenSource/composite/issues/50 - composite-base = doJailbreak super.composite-base; - composite-aeson = doJailbreak super.composite-aeson; + # Remove overrides when assert fails. + composite-base = assert super.composite-base.version == "0.7.5.0"; + doJailbreak super.composite-base; + composite-aeson = assert super.composite-aeson.version == "0.7.5.0"; + doJailbreak super.composite-aeson; # Too strict bounds on profunctors # https://github.com/google/proto-lens/issues/413 @@ -1969,4 +1921,19 @@ EOT # https://github.com/jcranch/tophat/issues/1 tophat = doJailbreak super.tophat; + # 2021-06-20: Outdated upper bounds + # https://github.com/Porges/email-validate-hs/issues/58 + email-validate = doJailbreak super.email-validate; + + # 2021-06-20: Outdated upper bounds + # https://github.com/Porges/email-validate-hs/issues/58 + ghcup = doJailbreak super.ghcup; + + # Break out of "Cabal < 3.2" constraint. + stylish-haskell = doJailbreak super.stylish-haskell; + + # To strict bound on hspec + # https://github.com/dagit/zenc/issues/5 + zenc = doJailbreak super.zenc; + } // import ./configuration-tensorflow.nix {inherit pkgs haskellLib;} self super diff --git a/pkgs/development/haskell-modules/configuration-darwin.nix b/pkgs/development/haskell-modules/configuration-darwin.nix index 4a62ab5867d..0c4b46360ba 100644 --- a/pkgs/development/haskell-modules/configuration-darwin.nix +++ b/pkgs/development/haskell-modules/configuration-darwin.nix @@ -171,5 +171,10 @@ self: super: { # 2021-05-25: Tests fail and I have no way to debug them. hls-class-plugin = dontCheck super.hls-class-plugin; hls-brittany-plugin = dontCheck super.hls-brittany-plugin; + hls-fourmolu-plugin = dontCheck super.hls-fourmolu-plugin; + hls-module-name-plugin = dontCheck super.hls-module-name-plugin; + + # We are lacking pure pgrep at the moment for tests to work + tmp-postgres = dontCheck super.tmp-postgres; } diff --git a/pkgs/development/haskell-modules/configuration-ghc-8.10.x.nix b/pkgs/development/haskell-modules/configuration-ghc-8.10.x.nix index 454b7338d66..251a3d94bb2 100644 --- a/pkgs/development/haskell-modules/configuration-ghc-8.10.x.nix +++ b/pkgs/development/haskell-modules/configuration-ghc-8.10.x.nix @@ -84,9 +84,6 @@ self: super: { executableHaskellDepends = drv.executableToolDepends or [] ++ [ self.repline ]; })); - # Break out of "Cabal < 3.2" constraint. - stylish-haskell = doJailbreak super.stylish-haskell; - # hackage-db 2.1.1 is incompatible with Cabal < 3.4 # See https://github.com/NixOS/cabal2nix/issues/501 hackage-db = self.hackage-db_2_1_0; diff --git a/pkgs/development/haskell-modules/configuration-ghc-9.0.x.nix b/pkgs/development/haskell-modules/configuration-ghc-9.0.x.nix index cfef0f14ea8..7731c73f0f6 100644 --- a/pkgs/development/haskell-modules/configuration-ghc-9.0.x.nix +++ b/pkgs/development/haskell-modules/configuration-ghc-9.0.x.nix @@ -80,10 +80,6 @@ self: super: { sha256 = "1rzs764a0nhx002v4fadbys98s6qblw4kx4g46galzjf5f7n2dn4"; }); doctest = dontCheck (doJailbreak super.doctest_0_18_1); - generic-deriving = appendPatch (doJailbreak super.generic-deriving) (pkgs.fetchpatch { - url = "https://gitlab.haskell.org/ghc/head.hackage/-/raw/master/patches/generic-deriving-1.13.1.patch"; - sha256 = "0z85kiwhi5p2wiqwyym0y8q8qrcifp125x5vm0n4482lz41kmqds"; - }); language-haskell-extract = appendPatch (doJailbreak super.language-haskell-extract) (pkgs.fetchpatch { url = "https://gitlab.haskell.org/ghc/head.hackage/-/raw/master/patches/language-haskell-extract-0.2.4.patch"; sha256 = "0rgzrq0513nlc1vw7nw4km4bcwn4ivxcgi33jly4a7n3c1r32v1f"; @@ -101,9 +97,6 @@ self: super: { # 0.16.0 introduced support for GHC 9.0.x, stackage has 0.15.0 memory = super.memory_0_16_0; - # 0.29 introduced support for GHC 9.0.x, stackage has 0.28 - cryptonite = super.cryptonite_0_29; - # GHC 9.0.x doesn't like `import Spec (main)` in Main.hs # https://github.com/snoyberg/mono-traversable/issues/192 mono-traversable = dontCheck super.mono-traversable; @@ -112,4 +105,11 @@ self: super: { # https://github.com/Soostone/retry/issues/71 retry = dontCheck super.retry; + # hlint 3.3 needs a ghc-lib-parser newer than the one from stackage + hlint = super.hlint_3_3_0.overrideScope (self: super: { + ghc-lib-parser = overrideCabal self.ghc-lib-parser_9_0_1_20210324 { + doHaddock = false; + }; + ghc-lib-parser-ex = self.ghc-lib-parser-ex_9_0_0_4; + }); } diff --git a/pkgs/development/haskell-modules/configuration-hackage2nix/broken.yaml b/pkgs/development/haskell-modules/configuration-hackage2nix/broken.yaml index 0f895e1f782..d960d4ed8f0 100644 --- a/pkgs/development/haskell-modules/configuration-hackage2nix/broken.yaml +++ b/pkgs/development/haskell-modules/configuration-hackage2nix/broken.yaml @@ -60,6 +60,7 @@ broken-packages: - adaptive-containers - adaptive-tuple - adb + - addy - adjunction - adobe-swatch-exchange - ADPfusion @@ -196,6 +197,7 @@ broken-packages: - ascii-flatten - ascii-string - ascii-vector-avc + - asif - asil - asn - asn1-codec @@ -402,6 +404,7 @@ broken-packages: - bloomfilter-redis - blosum - blubber-server + - bludigon - Blueprint - bluetileutils - blunk-hask-tests @@ -540,6 +543,7 @@ broken-packages: - canteven-parsedate - cantor - Capabilities + - capataz - capnp - capped-list - capri @@ -651,6 +655,7 @@ broken-packages: - clipper - clisparkline - clit + - clock-extras - clogparse - clone-all - closure @@ -678,6 +683,7 @@ broken-packages: - codec-beam - codec-libevent - codecov-haskell + - codeforces-cli - codepad - codeworld-api - codex @@ -802,6 +808,7 @@ broken-packages: - CoreDump - CoreErlang - core-haskell + - corenlp-parser - Coroutine - coroutine-object - CouchDB @@ -856,6 +863,7 @@ broken-packages: - css - css-easings - css-selectors + - css-syntax - csv-nptools - ctemplate - ctkl @@ -1080,6 +1088,7 @@ broken-packages: - docusign-example - docvim - domplate + - do-spaces - dotfs - dot-linker - doublify-toolkit @@ -1488,6 +1497,7 @@ broken-packages: - funpat - funspection - fused-effects-exceptions + - fused-effects-mwc-random - fused-effects-resumable - fusion - futun @@ -1560,6 +1570,7 @@ broken-packages: - ghc-clippy-plugin - ghc-core-smallstep - ghc-datasize + - ghc-debug-convention - ghc-dump-tree - ghc-dup - ghc-events-analyze @@ -2044,6 +2055,7 @@ broken-packages: - hgrib - hharp - HHDL + - hhp - hhwloc - hi - hi3status @@ -2102,9 +2114,6 @@ broken-packages: - hlongurl - hlrdb-core - hls-exactprint-utils - - hls-floskell-plugin - - hls-fourmolu-plugin - - hls-pragmas-plugin - hlwm - hmarkup - hmatrix-banded @@ -2363,6 +2372,7 @@ broken-packages: - hVOIDP - hwall-auth-iitk - hw-ci-assist + - hw-dump - hweblib - hwhile - hw-json-simd @@ -2736,6 +2746,7 @@ broken-packages: - limp-cbc - linda - linden + - linear-accelerate - linear-algebra-cblas - linear-base - linear-code @@ -3223,6 +3234,7 @@ broken-packages: - nix-freeze-tree - nixfromnpm - nixpkgs-update + - nix-thunk - nix-tools - nkjp - nlp-scores @@ -3525,6 +3537,7 @@ broken-packages: - pg-recorder - pg-store - pgstream + - pg-transact - phasechange - phaser - phoityne @@ -3612,6 +3625,7 @@ broken-packages: - poly-control - polydata-core - polynomial + - polysemy - polysemy-zoo - polytypeable - pomohoro @@ -3630,6 +3644,7 @@ broken-packages: - posix-api - posix-realtime - posix-waitpid + - posplyu - postcodes - postgres-embedded - postgresql-lo-stream @@ -4123,6 +4138,7 @@ broken-packages: - serokell-util - servant-aeson-specs - servant-auth-cookie + - servant-auth-docs - servant-auth-hmac - servant-auth-token-api - servant-avro @@ -4216,6 +4232,7 @@ broken-packages: - shivers-cfg - shoap - shopify + - shortcut-links - shorten-strings - show-prettyprint - Shpadoinkle-backend-snabbdom @@ -4377,6 +4394,7 @@ broken-packages: - sparse - sparsecheck - sparse-lin-alg + - spartacon - special-functors - special-keys - speculate @@ -4501,6 +4519,7 @@ broken-packages: - string-quote - stringtable-atom - stripe + - stripeapi - stripe-hs - stripe-http-streams - stripe-signature @@ -4549,6 +4568,7 @@ broken-packages: - swift-lda - swiss-ephemeris - swisstable + - sws - syb-extras - SybWidget - syb-with-class-instances-text @@ -4618,6 +4638,7 @@ broken-packages: - tcod-haskell - tcp - tcp-streams-openssl + - tdigest-Chart - tds - teams - teeth @@ -4648,6 +4669,7 @@ broken-packages: - terntup - terraform-http-backend-pass - tersmu + - tesla - testCom - testcontainers - test-fixture @@ -4683,6 +4705,7 @@ broken-packages: - text-position - text-register-machine - text-replace + - text-time - textual - text-utf8 - text-xml-qq @@ -4759,7 +4782,6 @@ broken-packages: - Titim - tkhs - tkyprof - - tmp-postgres - todo - tofromxml - to-haskell @@ -5103,6 +5125,7 @@ broken-packages: - weather-api - webapp - WebBits + - webby - webcloud - webcrank - webcrank-dispatch @@ -5279,6 +5302,7 @@ broken-packages: - yesod-form-richtext - yesod-gitrev - yesod-goodies + - yesod-ip - yesod-job-queue - yesod-links - yesod-lucid @@ -5346,3 +5370,4 @@ broken-packages: - ztar - Zwaluw - zxcvbn-dvorak + - zxcvbn-hs diff --git a/pkgs/development/haskell-modules/configuration-hackage2nix/main.yaml b/pkgs/development/haskell-modules/configuration-hackage2nix/main.yaml index 56bd4ac4ab8..fa4e798d1d3 100644 --- a/pkgs/development/haskell-modules/configuration-hackage2nix/main.yaml +++ b/pkgs/development/haskell-modules/configuration-hackage2nix/main.yaml @@ -73,26 +73,18 @@ default-package-overrides: # gi-gdkx11-4.x requires gtk-4.x, which is still under development and # not yet available in Nixpkgs - gi-gdkx11 < 4 - # Needs Cabal 3.4 for Setup.hs - - gi-javascriptcore < 4.0.23 # - - gi-soup < 2.4.24 # - - gi-webkit2 < 4.0.27 # # 2021-05-11: not all diagrams libraries have adjusted to # monoid-extras 0.6 yet, keep them pinned to lower versions # until we can do a full migration, see # https://github.com/diagrams/diagrams-core/issues/115 # We can keep this pin at most until base 4.15 + # Since the monoid-extras adjustment was combined with + # a major release in some cases, we need to wait for + # diagrams 1.5 to be released. - monoid-extras < 0.6 + - dual-tree < 0.2.3.0 - diagrams-core < 1.5.0 - diagrams-lib < 1.4.4 - # 2021-05-11: Pin for hls 1.1.0 - - ghcide == 1.2.* - - hls-plugin-api == 1.1.0.0 - - hls-explicit-imports-plugin < 1.0.0.2 - # 2021-05-12: remove once versions >= 5.0.0 is in stackage - - futhark < 0.19.5 - # 2021-06-05: remove once pandoc 2.14 is in stackage - - pandoc-crossref < 0.3.11.0 # 2021-06-14: hnix still needs old versions https://github.com/haskell-nix/hnix/issues/952 - hnix-store-core < 0.5 - hnix-store-remote < 0.5 @@ -113,7 +105,6 @@ extra-packages: - haddock-library ==1.7.* # required by stylish-cabal-0.5.0.0 - happy == 1.19.9 # for purescript - hinotify == 0.3.9 # for xmonad-0.26: https://github.com/kolmodin/hinotify/issues/29 - - hlint < 3.3 # We don‘t have ghc-lib-parser 9.0.X yet. - immortal == 0.2.2.1 # required by Hasura 1.3.1, 2020-08-20 - mmorph == 1.1.3 # Newest working version of mmorph on ghc 8.6.5. needed for hls - network == 2.6.3.1 # required by pkgs/games/hedgewars/default.nix, 2020-11-15 @@ -122,9 +113,6 @@ extra-packages: - resolv == 0.1.1.2 # required to build cabal-install-3.0.0.0 with pre ghc-8.8.x - sbv == 7.13 # required for pkgs.petrinizer - crackNum < 3.0 # 2021-05-21: 3.0 removed the lib which sbv 7.13 uses - - gi-gdk == 3.0.24 # 2021-05-07: For haskell-gi 0.25 without gtk4 - - gi-gtk < 4.0 # 2021-05-07: For haskell-gi 0.25 without gtk4 - - gi-gdkx11 == 3.0.11 # 2021-05-07: For haskell-gi 0.25 without gtk4 - ShellCheck == 0.7.1 # 2021-05-09: haskell-ci 0.12.1 pins this version - hackage-db < 2.1.1 # 2021-06-10: Need older hackage-db as long as Cabal < 3.4, see https://github.com/NixOS/cabal2nix/issues/501 @@ -143,6 +131,9 @@ package-maintainers: - pretty-simple - spago - termonad + domenkozar: + - cachix + - cachix-api expipiplus1: - VulkanMemoryAllocator - autoapply @@ -313,6 +304,7 @@ package-maintainers: - large-hashable - haskell-ci - diagrams + - rel8 # owothia - irc-client - chatter diff --git a/pkgs/development/haskell-modules/configuration-hackage2nix/stackage.yaml b/pkgs/development/haskell-modules/configuration-hackage2nix/stackage.yaml index 2ebd11bd006..69f518322c2 100644 --- a/pkgs/development/haskell-modules/configuration-hackage2nix/stackage.yaml +++ b/pkgs/development/haskell-modules/configuration-hackage2nix/stackage.yaml @@ -1,4 +1,4 @@ -# Stackage Nightly 2021-06-10 +# Stackage LTS 18.0 # This file is auto-generated by # maintainers/scripts/haskell/update-stackage.sh default-package-overrides: @@ -28,7 +28,7 @@ default-package-overrides: - aeson-picker ==0.1.0.5 - aeson-pretty ==0.8.8 - aeson-qq ==0.8.3 - - aeson-schemas ==1.3.3 + - aeson-schemas ==1.3.4 - aeson-typescript ==0.3.0.1 - aeson-with ==0.1.2.0 - aeson-yak ==0.1.1.3 @@ -195,12 +195,11 @@ default-package-overrides: - attoparsec-path ==0.0.0.1 - audacity ==0.0.2 - aur ==7.0.6 - - aura ==3.2.4 + - aura ==3.2.5 - authenticate ==1.3.5 - authenticate-oauth ==1.6.0.1 - autoexporter ==1.1.20 - auto-update ==0.1.6 - - avers ==0.0.17.1 - avro ==0.5.2.0 - aws-cloudfront-signed-cookies ==0.2.0.8 - aws-xray-client ==0.1.0.0 @@ -237,7 +236,7 @@ default-package-overrides: - bech32 ==1.1.0 - bech32-th ==1.0.2 - bench ==1.0.12 - - benchpress ==0.2.2.16 + - benchpress ==0.2.2.17 - between ==0.11.0.0 - bibtex ==0.1.0.6 - bifunctors ==5.5.11 @@ -279,7 +278,7 @@ default-package-overrides: - blaze-svg ==0.3.6.1 - blaze-textual ==0.2.1.0 - bmp ==1.2.6.3 - - BNFC ==2.9.1 + - BNFC ==2.9.2 - BNFC-meta ==0.6.1 - board-games ==0.3 - boltzmann-samplers ==0.1.1.0 @@ -304,7 +303,7 @@ default-package-overrides: - buffer-builder ==0.2.4.7 - buffer-pipe ==0.0 - bugsnag-haskell ==0.0.4.1 - - bugsnag-hs ==0.2.0.3 + - bugsnag-hs ==0.2.0.4 - bugzilla-redhat ==0.3.1 - burrito ==1.2.0.2 - butcher ==1.3.3.2 @@ -329,7 +328,8 @@ default-package-overrides: - bzlib ==0.5.1.0 - bzlib-conduit ==0.3.0.2 - c14n ==0.1.0.1 - - c2hs ==0.28.7 + - c2hs ==0.28.8 + - cabal2spec ==2.6.2 - cabal-appimage ==0.3.0.2 - cabal-debian ==5.1 - cabal-doctest ==1.0.8 @@ -393,8 +393,8 @@ default-package-overrides: - cipher-des ==0.0.6 - cipher-rc4 ==0.1.4 - circle-packing ==0.1.0.6 - - circular ==0.3.1.1 - - citeproc ==0.3.0.9 + - circular ==0.4.0.0 + - citeproc ==0.4.0.1 - clash-ghc ==1.4.2 - clash-lib ==1.4.2 - clash-prelude ==1.4.2 @@ -404,8 +404,7 @@ default-package-overrides: - clientsession ==0.9.1.2 - climb ==0.3.3 - Clipboard ==2.3.2.0 - - clock ==0.8 - - clock-extras ==0.1.0.2 + - clock ==0.8.2 - closed ==0.2.0.1 - clumpiness ==0.17.0.2 - ClustalParser ==1.3.0 @@ -425,9 +424,9 @@ default-package-overrides: - combinatorial ==0.1.0.1 - comfort-array ==0.4.1 - comfort-graph ==0.0.3.1 - - commonmark ==0.1.1.4 - - commonmark-extensions ==0.2.0.4 - - commonmark-pandoc ==0.2.0.1 + - commonmark ==0.2 + - commonmark-extensions ==0.2.1.2 + - commonmark-pandoc ==0.2.1 - commutative ==0.0.2 - comonad ==5.0.8 - comonad-extras ==4.0.1 @@ -502,7 +501,7 @@ default-package-overrides: - cryptohash-sha1 ==0.11.100.1 - cryptohash-sha256 ==0.11.102.0 - cryptohash-sha512 ==0.11.100.1 - - cryptonite ==0.28 + - cryptonite ==0.29 - cryptonite-conduit ==0.2.2 - cryptonite-openssl ==0.7 - crypto-numbers ==0.2.7 @@ -622,9 +621,9 @@ default-package-overrides: - dockerfile ==0.2.0 - doclayout ==0.3.0.2 - doctemplates ==0.9 - - doctest ==0.16.3 + - doctest ==0.17 - doctest-discover ==0.2.0.0 - - doctest-driver-gen ==0.3.0.3 + - doctest-driver-gen ==0.3.0.4 - doctest-exitcode-stdio ==0.0 - doctest-extract ==0.1 - doctest-lib ==0.1 @@ -675,12 +674,12 @@ default-package-overrides: - elm-bridge ==0.6.1 - elm-core-sources ==1.0.0 - elm-export ==0.6.0.1 - - elynx ==0.5.0.2 - - elynx-markov ==0.5.0.2 - - elynx-nexus ==0.5.0.2 - - elynx-seq ==0.5.0.2 - - elynx-tools ==0.5.0.2 - - elynx-tree ==0.5.0.2 + - elynx ==0.5.1.1 + - elynx-markov ==0.5.1.1 + - elynx-nexus ==0.5.1.1 + - elynx-seq ==0.5.1.1 + - elynx-tools ==0.5.1.1 + - elynx-tree ==0.5.1.1 - email-validate ==2.3.2.13 - emd ==0.2.0.0 - emojis ==0.1 @@ -736,14 +735,14 @@ default-package-overrides: - extensible-exceptions ==0.1.1.4 - extra ==1.7.9 - extractable-singleton ==0.0.1 - - extrapolate ==0.4.4 + - extrapolate ==0.4.6 - fail ==4.9.0.0 - failable ==1.2.4.0 - fakedata ==0.8.0 - fakedata-parser ==0.1.0.0 - fakefs ==0.3.0.2 - fakepull ==0.3.0.2 - - faktory ==1.0.3.0 + - faktory ==1.0.3.1 - fast-digits ==0.3.0.0 - fast-logger ==3.0.5 - fast-math ==1.0.2 @@ -804,7 +803,7 @@ default-package-overrides: - forkable-monad ==0.2.0.3 - forma ==1.1.3 - format-numbers ==0.1.0.1 - - formatting ==6.3.7 + - formatting ==7.1.2 - foundation ==0.0.26.1 - fourmolu ==0.3.0.0 - free ==5.1.7 @@ -840,7 +839,7 @@ default-package-overrides: - generic-constraints ==1.1.1.1 - generic-data ==0.9.2.0 - generic-data-surgery ==0.3.0.0 - - generic-deriving ==1.13.1 + - generic-deriving ==1.14 - generic-functor ==0.2.0.0 - generic-lens ==2.1.0.0 - generic-lens-core ==2.1.0.0 @@ -884,7 +883,7 @@ default-package-overrides: - geojson ==4.0.2 - getopt-generics ==0.13.0.4 - ghc-byteorder ==4.11.0.0.10 - - ghc-check ==0.5.0.4 + - ghc-check ==0.5.0.5 - ghc-core ==0.5.6 - ghc-events ==0.17.0 - ghc-exactprint ==0.6.4 @@ -906,25 +905,24 @@ default-package-overrides: - ghc-typelits-natnormalise ==0.7.4 - ghc-typelits-presburger ==0.6.0.0 - ghost-buster ==0.1.1.0 - - gi-atk ==2.0.22 - - gi-cairo ==1.0.24 - - gi-cairo-connector ==0.1.0 - - gi-cairo-render ==0.1.0 - - gi-dbusmenu ==0.4.8 - - gi-dbusmenugtk3 ==0.4.9 - - gi-gdk ==3.0.23 - - gi-gdkpixbuf ==2.0.24 - - gi-gdkx11 ==3.0.10 - - gi-gio ==2.0.27 - - gi-glib ==2.0.24 - - gi-gobject ==2.0.25 - - gi-graphene ==1.0.2 - - gi-gtk ==3.0.36 - - gi-gtk-hs ==0.3.9 - - gi-harfbuzz ==0.0.3 + - gi-atk ==2.0.23 + - gi-cairo ==1.0.25 + - gi-dbusmenu ==0.4.9 + - gi-dbusmenugtk3 ==0.4.10 + - gi-gdk ==3.0.24 + - gi-gdkpixbuf ==2.0.26 + - gi-gdkx11 ==3.0.11 + - gi-gio ==2.0.28 + - gi-glib ==2.0.25 + - gi-gmodule ==2.0.1 + - gi-gobject ==2.0.26 + - gi-graphene ==1.0.3 + - gi-gtk ==3.0.37 + - gi-gtk-hs ==0.3.10 + - gi-harfbuzz ==0.0.4 - ginger ==0.10.1.0 - gingersnap ==0.3.1.0 - - gi-pango ==1.0.23 + - gi-pango ==1.0.24 - githash ==0.1.6.0 - github-release ==1.3.7 - github-rest ==1.0.3 @@ -932,7 +930,7 @@ default-package-overrides: - github-webhooks ==0.15.0 - gitlab-haskell ==0.2.5 - gitrev ==1.3.1 - - gi-xlib ==2.0.9 + - gi-xlib ==2.0.10 - gl ==0.9 - glabrous ==2.0.4 - GLFW-b ==3.3.0.0 @@ -962,13 +960,12 @@ default-package-overrides: - groom ==0.1.2.1 - group-by-date ==0.1.0.4 - groups ==0.5.3 - - gtk-sni-tray ==0.1.6.2 - gtk-strut ==0.1.3.0 - guarded-allocation ==0.0.1 - H ==0.9.0.1 - hackage-db ==2.1.1 - hackage-security ==0.6.0.1 - - haddock-library ==1.9.0 + - haddock-library ==1.10.0 - hadoop-streaming ==0.2.0.3 - hakyll-convert ==0.3.0.4 - hal ==0.4.8 @@ -976,7 +973,7 @@ default-package-overrides: - hall-symbols ==0.1.0.6 - hamtsolo ==1.0.3 - HandsomeSoup ==0.4.2 - - hapistrano ==0.4.1.4 + - hapistrano ==0.4.2.0 - happstack-server ==7.7.1 - happy ==1.20.0 - happy-meta ==0.2.0.11 @@ -990,8 +987,8 @@ default-package-overrides: - hashtables ==1.2.4.1 - haskeline ==0.8.1.2 - haskell-awk ==1.2.0.1 - - haskell-gi ==0.24.7 - - haskell-gi-base ==0.24.5 + - haskell-gi ==0.25.0 + - haskell-gi-base ==0.25.0 - haskell-gi-overloading ==1.0 - haskell-import-graph ==1.0.4 - haskell-lexer ==1.1 @@ -1037,6 +1034,8 @@ default-package-overrides: - hexpat ==0.20.13 - hformat ==0.3.3.1 - hfsevents ==0.1.6 + - hgeometry ==0.12.0.4 + - hgeometry-combinatorial ==0.12.0.3 - hgrev ==0.2.6 - hidapi ==0.1.7 - hie-bios ==0.7.5 @@ -1049,9 +1048,17 @@ default-package-overrides: - hjsmin ==0.2.0.4 - hkd-default ==1.1.0.0 - hkgr ==0.3 + - hledger ==1.21 + - hledger-iadd ==1.3.14 + - hledger-interest ==1.6.1 + - hledger-lib ==1.21 + - hledger-stockquotes ==0.1.2.0 + - hledger-ui ==1.21 + - hledger-web ==1.21 - hlibcpuid ==0.2.0 - hlibgit2 ==0.18.0.16 - hlibsass ==0.1.10.1 + - hlint ==3.2.7 - hmatrix ==0.20.2 - hmatrix-backprop ==0.1.3.0 - hmatrix-gsl ==0.19.0.1 @@ -1062,8 +1069,10 @@ default-package-overrides: - hmpfr ==0.4.4 - hnock ==0.4.0 - hoauth2 ==1.16.0 + - hoogle ==5.0.18.1 - hOpenPGP ==2.9.5 - hopenpgp-tools ==0.23.6 + - hopenssl ==2.2.4 - hopfli ==0.2.2.1 - hosc ==0.18.1 - hostname ==1.0 @@ -1113,7 +1122,7 @@ default-package-overrides: - hspec-golden-aeson ==0.7.0.0 - hspec-hedgehog ==0.0.1.2 - hspec-junit-formatter ==1.0.0.4 - - hspec-leancheck ==0.0.4 + - hspec-leancheck ==0.0.6 - hspec-megaparsec ==2.2.0 - hspec-meta ==2.7.8 - hspec-need-env ==0.1.0.7 @@ -1263,7 +1272,7 @@ default-package-overrides: - io-streams ==1.5.2.1 - io-streams-haproxy ==1.0.1.0 - ip6addr ==1.0.2 - - ipa ==0.3.1 + - ipa ==0.3.1.1 - iproute ==1.7.11 - IPv6Addr ==2.0.2 - ipynb ==0.1.0.1 @@ -1285,7 +1294,7 @@ default-package-overrides: - ix-shapable ==0.1.0 - jack ==0.7.2 - jalaali ==1.0.0.0 - - jira-wiki-markup ==1.3.5 + - jira-wiki-markup ==1.4.0 - jose ==0.8.4 - jose-jwt ==0.9.2 - js-chart ==2.9.4.1 @@ -1331,7 +1340,7 @@ default-package-overrides: - lame ==0.2.0 - language-avro ==0.1.3.1 - language-bash ==0.9.2 - - language-c ==0.8.3 + - language-c ==0.9.0.1 - language-c-quote ==0.13 - language-docker ==10.0.1 - language-java ==0.2.9 @@ -1458,7 +1467,7 @@ default-package-overrides: - maximal-cliques ==0.1.1 - mbox ==0.3.4 - mbox-utility ==0.0.3.1 - - mcmc ==0.4.0.0 + - mcmc ==0.5.0.0 - mcmc-types ==1.0.3 - medea ==1.2.0 - median-stream ==0.7.0.0 @@ -1471,6 +1480,7 @@ default-package-overrides: - mercury-api ==0.1.0.2 - mergeful ==0.2.0.0 - mergeless ==0.3.0.0 + - mersenne-random ==1.0.0.1 - mersenne-random-pure64 ==0.2.2.0 - messagepack ==0.5.4 - metrics ==0.4.1.1 @@ -1544,8 +1554,8 @@ default-package-overrides: - monad-time ==0.3.1.0 - monad-unlift ==0.2.0 - monad-unlift-ref ==0.2.1 - - mongoDB ==2.7.0.0 - - monoid-subclasses ==1.0.1 + - mongoDB ==2.7.1.1 + - monoid-subclasses ==1.1 - monoid-transformer ==0.0.4 - mono-traversable ==1.0.15.1 - mono-traversable-instances ==0.1.1.0 @@ -1575,7 +1585,7 @@ default-package-overrides: - mustache ==2.3.1 - mutable-containers ==0.3.4 - mwc-probability ==2.3.1 - - mwc-random ==0.14.0.0 + - mwc-random ==0.15.0.1 - mwc-random-monad ==0.7.3.1 - mx-state-codes ==1.0.0.0 - mysql ==0.2.0.1 @@ -1595,7 +1605,7 @@ default-package-overrides: - netlib-carray ==0.1 - netlib-comfort-array ==0.0.0.1 - netlib-ffi ==0.1.1 - - net-mqtt ==0.7.1.0 + - net-mqtt ==0.7.1.1 - net-mqtt-lens ==0.1.0.0 - netpbm ==1.0.4 - nettle ==0.3.0 @@ -1636,8 +1646,8 @@ default-package-overrides: - nowdoc ==0.1.1.0 - nqe ==0.6.3 - nri-env-parser ==0.1.0.7 - - nri-observability ==0.1.0.2 - - nri-prelude ==0.6.0.1 + - nri-observability ==0.1.0.3 + - nri-prelude ==0.6.0.2 - nsis ==0.3.3 - numbers ==3000.2.0.2 - numeric-extras ==0.1 @@ -1652,8 +1662,8 @@ default-package-overrides: - nvim-hs-ghcid ==2.0.0.0 - oauthenticated ==0.2.1.0 - ObjectName ==1.1.0.1 - - o-clock ==1.2.0.1 - - odbc ==0.2.2 + - o-clock ==1.2.1 + - odbc ==0.2.5 - oeis2 ==1.0.5 - ofx ==0.4.4.0 - old-locale ==1.0.0.7 @@ -1698,7 +1708,7 @@ default-package-overrides: - pager ==0.1.1.0 - pagination ==0.2.2 - pagure-cli ==0.2 - - pandoc ==2.13 + - pandoc ==2.14.0.2 - pandoc-dhall-decoder ==0.1.0.1 - pandoc-plot ==1.2.3 - pandoc-throw ==0.1.0.0 @@ -1721,7 +1731,7 @@ default-package-overrides: - password ==3.0.0.0 - password-instances ==3.0.0.0 - password-types ==1.0.0.0 - - path ==0.7.1 + - path ==0.8.0 - path-binary-instance ==0.1.0.1 - path-extensions ==0.1.1.0 - path-extra ==0.2.0 @@ -1741,7 +1751,7 @@ default-package-overrides: - pdfinfo ==1.5.4 - peano ==0.1.0.1 - pem ==0.2.4 - - percent-format ==0.0.1 + - percent-format ==0.0.2 - peregrin ==0.3.1 - perfect-hash-generator ==0.2.0.6 - perfect-vector-shuffle ==0.1.1.1 @@ -1871,7 +1881,7 @@ default-package-overrides: - pureMD5 ==2.1.3 - purescript-bridge ==0.14.0.0 - pushbullet-types ==0.4.1.0 - - pusher-http-haskell ==2.1.0.2 + - pusher-http-haskell ==2.1.0.3 - pvar ==1.0.0.0 - PyF ==0.9.0.3 - qchas ==1.1.0.1 @@ -1932,6 +1942,8 @@ default-package-overrides: - readable ==0.3.1 - read-editor ==0.1.0.2 - read-env-var ==1.0.0.0 + - reanimate ==1.1.4.0 + - reanimate-svg ==0.13.0.1 - rebase ==1.13.0.1 - record-dot-preprocessor ==0.2.11 - record-hasfield ==1.0 @@ -2003,7 +2015,7 @@ default-package-overrides: - rosezipper ==0.2 - rot13 ==0.2.0.1 - rpmbuild-order ==0.4.5 - - rp-tree ==0.4 + - rp-tree ==0.6 - RSA ==2.4.1 - runmemo ==1.0.0.1 - rvar ==0.2.0.6 @@ -2024,7 +2036,7 @@ default-package-overrides: - sample-frame ==0.0.3 - sample-frame-np ==0.0.4.1 - sampling ==0.3.5 - - sandwich ==0.1.0.7 + - sandwich ==0.1.0.8 - sandwich-quickcheck ==0.1.0.5 - sandwich-slack ==0.1.0.4 - sandwich-webdriver ==0.1.0.5 @@ -2068,7 +2080,7 @@ default-package-overrides: - seqid ==0.6.2 - seqid-streams ==0.7.2 - sequence-formats ==1.6.1 - - sequenceTools ==1.4.0.5 + - sequenceTools ==1.5.0 - serf ==0.1.1.0 - serialise ==0.2.3.0 - servant ==0.18.2 @@ -2108,11 +2120,13 @@ default-package-overrides: - setlocale ==1.0.0.10 - sexp-grammar ==2.3.0 - SHA ==1.6.4.4 + - shake ==0.19.4 - shake-language-c ==0.12.0 - shake-plus ==0.3.3.1 - shake-plus-extended ==0.4.1.0 - shakespeare ==2.0.25 - shared-memory ==0.2.0.0 + - ShellCheck ==0.7.2 - shell-conduit ==5.0.0 - shell-escape ==0.2.0 - shellmet ==0.0.4.0 @@ -2153,7 +2167,7 @@ default-package-overrides: - slack-progressbar ==0.1.0.1 - slick ==1.1.1.0 - slist ==0.2.0.0 - - slynx ==0.5.0.2 + - slynx ==0.5.1.1 - smallcheck ==1.2.1 - smash ==0.1.2 - smash-aeson ==0.1.0.0 @@ -2182,7 +2196,7 @@ default-package-overrides: - sparse-tensor ==0.2.1.5 - spatial-math ==0.5.0.1 - special-values ==0.1.0.0 - - speculate ==0.4.8 + - speculate ==0.4.10 - speedy-slice ==0.3.2 - Spintax ==0.3.6 - splice ==0.6.1.1 @@ -2200,6 +2214,7 @@ default-package-overrides: - squeather ==0.8.0.0 - srcloc ==0.6 - stache ==2.3.0 + - stack ==2.7.1 - stackcollapse-ghc ==0.0.1.3 - stack-templatizer ==0.1.0.2 - stateref ==0.3 @@ -2211,10 +2226,8 @@ default-package-overrides: - step-function ==0.2 - stm-chans ==3.0.0.4 - stm-conduit ==4.0.1 - - stm-containers ==1.2 - stm-delay ==0.1.1.1 - stm-extras ==0.1.0.3 - - stm-hamt ==1.2.0.6 - stm-lifted ==2.5.0.0 - STMonadTrans ==0.4.5 - stm-split ==0.0.2.1 @@ -2267,7 +2280,7 @@ default-package-overrides: - swagger ==0.3.0 - swagger2 ==2.6 - sweet-egison ==0.1.1.3 - - swish ==0.10.0.4 + - swish ==0.10.0.5 - syb ==0.7.2.1 - sydtest ==0.2.0.0 - sydtest-discover ==0.0.0.0 @@ -2305,13 +2318,13 @@ default-package-overrides: - tasty-expected-failure ==0.12.3 - tasty-focus ==1.0.1 - tasty-golden ==2.3.4 - - tasty-hedgehog ==1.0.1.0 + - tasty-hedgehog ==1.1.0.0 - tasty-hspec ==1.1.6 - tasty-hunit ==0.10.0.3 - tasty-hunit-compat ==0.2.0.1 - tasty-inspection-testing ==0.1 - tasty-kat ==0.0.3 - - tasty-leancheck ==0.0.1 + - tasty-leancheck ==0.0.2 - tasty-lua ==0.2.3.2 - tasty-program ==1.0.5 - tasty-quickcheck ==0.10.1.2 @@ -2336,12 +2349,12 @@ default-package-overrides: - terminal-size ==0.3.2.1 - test-framework ==0.8.2.0 - test-framework-hunit ==0.3.0.2 - - test-framework-leancheck ==0.0.1 + - test-framework-leancheck ==0.0.4 - test-framework-quickcheck2 ==0.3.0.5 - test-framework-smallcheck ==0.2 - test-fun ==0.1.0.0 - testing-type-modifiers ==0.1.0.1 - - texmath ==0.12.2 + - texmath ==0.12.3 - text-ansi ==0.1.1 - text-binary ==0.2.1.1 - text-builder ==0.6.6.2 @@ -2395,7 +2408,7 @@ default-package-overrides: - th-test-utils ==1.1.0 - th-utilities ==0.2.4.3 - thyme ==0.3.5.5 - - tidal ==1.7.4 + - tidal ==1.7.5 - tile ==0.3.0.0 - time-compat ==1.9.5 - timeit ==2.0 @@ -2416,7 +2429,7 @@ default-package-overrides: - tls ==1.5.5 - tls-debug ==0.4.8 - tls-session-manager ==0.0.4 - - tlynx ==0.5.0.2 + - tlynx ==0.5.1.1 - tmapchan ==0.0.3 - tmapmvar ==0.0.4 - tmp-postgres ==1.34.1.0 @@ -2480,9 +2493,11 @@ default-package-overrides: - unexceptionalio ==0.5.1 - unexceptionalio-trans ==0.5.1 - unicode ==0.0.1.1 + - unicode-collation ==0.1.3 - unicode-show ==0.1.0.4 - unicode-transforms ==0.3.7.1 - unification-fd ==0.11.1 + - union-angle ==0.1.0.1 - union-find ==0.2 - unipatterns ==0.0.0.0 - uniplate ==1.6.13 @@ -2558,7 +2573,7 @@ default-package-overrides: - vector-split ==1.0.0.2 - vector-th-unbox ==0.2.1.9 - verbosity ==0.4.0.0 - - versions ==4.0.3 + - versions ==5.0.0 - vformat ==0.14.1.0 - vformat-aeson ==0.1.0.1 - vformat-time ==0.1.0.0 @@ -2576,7 +2591,7 @@ default-package-overrides: - wai-feature-flags ==0.1.0.1 - wai-handler-launch ==3.0.3.1 - wai-logger ==2.3.6 - - wai-middleware-auth ==0.2.4.1 + - wai-middleware-auth ==0.2.5.0 - wai-middleware-caching ==0.1.0.2 - wai-middleware-clacks ==0.1.0.1 - wai-middleware-prometheus ==1.0.0 @@ -2594,7 +2609,6 @@ default-package-overrides: - warp-tls-uid ==0.2.0.6 - wave ==0.2.0 - wcwidth ==0.0.2 - - webby ==1.0.1 - webdriver ==0.9.0.1 - webex-teams-api ==0.2.0.1 - webex-teams-conduit ==0.2.0.1 @@ -2633,7 +2647,7 @@ default-package-overrides: - writer-cps-transformers ==0.5.6.1 - wss-client ==0.3.0.0 - wuss ==1.1.18 - - X11 ==1.9.2 + - X11 ==1.10 - X11-xft ==0.3.1 - x11-xim ==0.0.9.0 - x509 ==1.7.5 @@ -2674,7 +2688,7 @@ default-package-overrides: - yesod-bin ==1.6.1 - yesod-core ==1.6.20.1 - yesod-fb ==0.6.1 - - yesod-form ==1.6.7 + - yesod-form ==1.7.0 - yesod-gitrev ==0.2.1 - yesod-markdown ==0.12.6.11 - yesod-newsfeed ==1.7.0.0 diff --git a/pkgs/development/haskell-modules/configuration-hackage2nix/transitive-broken.yaml b/pkgs/development/haskell-modules/configuration-hackage2nix/transitive-broken.yaml index 59c2630a962..5c38f0b040f 100644 --- a/pkgs/development/haskell-modules/configuration-hackage2nix/transitive-broken.yaml +++ b/pkgs/development/haskell-modules/configuration-hackage2nix/transitive-broken.yaml @@ -92,6 +92,7 @@ dont-distribute-packages: - ApplePush - approx-rand-test - arbor-monad-metric-datadog + - arch-hs - archlinux-web - arduino-copilot - arff @@ -120,7 +121,6 @@ dont-distribute-packages: - atuin - audiovisual - aura - - aura_3_2_5 - authoring - AutoForms - autonix-deps-kf5 @@ -321,6 +321,7 @@ dont-distribute-packages: - cakyrespa - cal3d-examples - cal3d-opengl + - calamity-commands - calc - calculator - caldims @@ -435,6 +436,7 @@ dont-distribute-packages: - code-conjure - codec-rpm - codemonitor + - co-feldspar - cognimeta-utils - coinbase-exchange - colada @@ -631,6 +633,7 @@ dont-distribute-packages: - dingo-widgets - diplomacy - diplomacy-server + - di-polysemy - dirfiles - discogs-haskell - discord-gateway @@ -695,6 +698,7 @@ dont-distribute-packages: - Dust-tools-pcap - dvda - dynamic-cabal + - dynamic-pipeline - dynamic-plot - dynobud - DysFRP-Cairo @@ -928,6 +932,10 @@ dont-distribute-packages: - geodetic - geolite-csv - getemx + - ghc-debug-brick + - ghc-debug-client + - ghc-debug-common + - ghc-debug-stub - ghc-imported-from - ghc-instances - ghci-pretty @@ -960,8 +968,10 @@ dont-distribute-packages: - global-config - glome-hs - GlomeView + - gloss-accelerate - gloss-devil - gloss-examples + - gloss-raster-accelerate - gloss-sodium - gmap - gmndl @@ -1205,7 +1215,6 @@ dont-distribute-packages: - hasql-cursor-query - hasql-postgres - hasql-postgres-options - - hasql-queue - hasql-th - hastache-aeson - haste-app @@ -1253,7 +1262,6 @@ dont-distribute-packages: - hedgehog-gen-json - Hedi - hedis-pile - - heidi - heist-aeson - helics - helics-wai @@ -1892,7 +1900,6 @@ dont-distribute-packages: - MaybeT-transformers - MC-Fold-DP - mcmc - - mcmc_0_5_0_0 - mcmc-samplers - mDNSResponder-client - mealy @@ -2183,7 +2190,6 @@ dont-distribute-packages: - peyotls - peyotls-codec - pgsql-simple - - pg-transact - phonetic-languages-examples - phonetic-languages-simplified-lists-examples - phooey @@ -2222,16 +2228,29 @@ dont-distribute-packages: - poke - polh-lexicon - polydata + - polysemy-chronos + - polysemy-conc - polysemy-extra + - polysemy-fs - polysemy-fskvstore + - polysemy-http - polysemy-kvstore-jsonfile + - polysemy-log - polysemy-log-co + - polysemy-log-di - polysemy-methodology - polysemy-methodology-composite + - polysemy-mocks - polysemy-optics - polysemy-path + - polysemy-plugin - polysemy-RandomFu + - polysemy-resume + - polysemy-test + - polysemy-time + - polysemy-video - polysemy-vinyl + - polysemy-webserver - polyseq - polytypeable-utils - pomodoro @@ -2607,6 +2626,7 @@ dont-distribute-packages: - servant-streaming-docs - servant-streaming-server - servant-swagger-tags + - servant-util-beam-pg - servant-waargonaut - servant-zeppelin-client - servant-zeppelin-server @@ -2805,6 +2825,7 @@ dont-distribute-packages: - structured-mongoDB - stunts - stutter + - stylist - subhask - substring-parser - summoner-tui @@ -2824,7 +2845,6 @@ dont-distribute-packages: - swearjure - sweet-egison - switch - - sydtest-persistent-postgresql - sylvia - symantic-atom - symantic-lib diff --git a/pkgs/development/haskell-modules/configuration-nix.nix b/pkgs/development/haskell-modules/configuration-nix.nix index 161712d594b..facd3ec5a3d 100644 --- a/pkgs/development/haskell-modules/configuration-nix.nix +++ b/pkgs/development/haskell-modules/configuration-nix.nix @@ -243,7 +243,7 @@ self: super: builtins.intersectAttrs super { llvm-hs = super.llvm-hs.override { llvm-config = pkgs.llvm_9; }; # Needs help finding LLVM. - spaceprobe = addBuildTool super.spaceprobe self.llvmPackages.llvm; + spaceprobe = addBuildTool super.spaceprobe self.buildHaskellPackages.llvmPackages.llvm; # Tries to run GUI in tests leksah = dontCheck (overrideCabal super.leksah (drv: { @@ -336,7 +336,7 @@ self: super: builtins.intersectAttrs super { # https://github.com/deech/fltkhs/issues/16 fltkhs = overrideCabal super.fltkhs (drv: { - libraryToolDepends = (drv.libraryToolDepends or []) ++ [pkgs.autoconf]; + libraryToolDepends = (drv.libraryToolDepends or []) ++ [pkgs.buildPackages.autoconf]; librarySystemDepends = (drv.librarySystemDepends or []) ++ [pkgs.fltk13 pkgs.libGL pkgs.libjpeg]; }); @@ -495,8 +495,8 @@ self: super: builtins.intersectAttrs super { Frames-beam = dontCheck super.Frames-beam; # Compile manpages (which are in RST and are compiled with Sphinx). - futhark = with pkgs; - overrideCabal (addBuildTools super.futhark [makeWrapper python3Packages.sphinx]) + futhark = + overrideCabal (addBuildTools super.futhark (with pkgs.buildPackages; [makeWrapper python3Packages.sphinx])) (_drv: { postBuild = (_drv.postBuild or "") + '' make -C docs man @@ -511,7 +511,7 @@ self: super: builtins.intersectAttrs super { git-annex = with pkgs; if (!stdenv.isLinux) then let path = lib.makeBinPath [ coreutils ]; - in overrideCabal (addBuildTool super.git-annex makeWrapper) (_drv: { + in overrideCabal (addBuildTool super.git-annex buildPackages.makeWrapper) (_drv: { # This is an instance of https://github.com/NixOS/nix/pull/1085 # Fails with: # gpg: can't connect to the agent: File name too long @@ -577,7 +577,17 @@ self: super: builtins.intersectAttrs super { sha256 = "1hjdprm990vyxz86fgq14ajn0lkams7i00h8k2i2g1a0hjdwppq6"; }; - spagoWithOverrides = super.spago.override { + spagoWithPatches = appendPatch super.spago ( + # Spago needs a small patch to work with versions-5.0.0: + # https://github.com/purescript/spago/pull/798 + # This can probably be removed with >spago-0.20.3. + pkgs.fetchpatch { + url = "https://github.com/purescript/spago/commit/dd4bf4413d9675c1c8065d24d0ed7b345c7fa5dd.patch"; + sha256 = "1i1r3f4n9mlkckx15bfrdy5m7gjf0zx7ycwyqra6qn34zpcbzpmf"; + } + ); + + spagoWithOverrides = spagoWithPatches.override { # spago has not yet been updated for the latest dhall. dhall = self.dhall_1_38_1; }; @@ -621,7 +631,7 @@ self: super: builtins.intersectAttrs super { # mplayer-spot uses mplayer at runtime. mplayer-spot = let path = pkgs.lib.makeBinPath [ pkgs.mplayer ]; - in overrideCabal (addBuildTool super.mplayer-spot pkgs.makeWrapper) (oldAttrs: { + in overrideCabal (addBuildTool super.mplayer-spot pkgs.buildPackages.makeWrapper) (oldAttrs: { postInstall = '' wrapProgram $out/bin/mplayer-spot --prefix PATH : "${path}" ''; @@ -633,7 +643,7 @@ self: super: builtins.intersectAttrs super { cut-the-crap = let path = pkgs.lib.makeBinPath [ pkgs.ffmpeg pkgs.youtube-dl ]; - in overrideCabal (addBuildTool super.cut-the-crap pkgs.makeWrapper) (_drv: { + in overrideCabal (addBuildTool super.cut-the-crap pkgs.buildPackages.makeWrapper) (_drv: { postInstall = '' wrapProgram $out/bin/cut-the-crap \ --prefix PATH : "${path}" @@ -650,7 +660,7 @@ self: super: builtins.intersectAttrs super { neuron = overrideCabal (super.neuron) (drv: { # neuron expects the neuron-search script to be in PATH at built-time. - buildTools = [ pkgs.makeWrapper ]; + buildTools = [ pkgs.buildPackages.makeWrapper ]; preConfigure = '' mkdir -p $out/bin cp src-bash/neuron-search $out/bin/neuron-search @@ -790,6 +800,42 @@ self: super: builtins.intersectAttrs super { export HOME=$TMPDIR/home ''; }); + hls-ormolu-plugin = overrideCabal super.hls-ormolu-plugin (drv: { + testToolDepends = [ pkgs.git ]; + preCheck = '' + export HOME=$TMPDIR/home + ''; + }); + hls-fourmolu-plugin = overrideCabal super.hls-fourmolu-plugin (drv: { + testToolDepends = [ pkgs.git ]; + preCheck = '' + export HOME=$TMPDIR/home + ''; + }); + hls-module-name-plugin = overrideCabal super.hls-module-name-plugin (drv: { + testToolDepends = [ pkgs.git ]; + preCheck = '' + export HOME=$TMPDIR/home + ''; + }); + hls-splice-plugin = overrideCabal super.hls-splice-plugin (drv: { + testToolDepends = [ pkgs.git ]; + preCheck = '' + export HOME=$TMPDIR/home + ''; + }); + hls-floskell-plugin = overrideCabal super.hls-floskell-plugin (drv: { + testToolDepends = [ pkgs.git ]; + preCheck = '' + export HOME=$TMPDIR/home + ''; + }); + hls-pragmas-plugin = overrideCabal super.hls-pragmas-plugin (drv: { + testToolDepends = [ pkgs.git ]; + preCheck = '' + export HOME=$TMPDIR/home + ''; + }); # Tests have file permissions expections that don‘t work with the nix store. hls-stylish-haskell-plugin = dontCheck super.hls-stylish-haskell-plugin; hls-haddock-comments-plugin = overrideCabal super.hls-haddock-comments-plugin (drv: { @@ -799,6 +845,7 @@ self: super: builtins.intersectAttrs super { ''; }); hls-eval-plugin = overrideCabal super.hls-eval-plugin (drv: { + testToolDepends = [ pkgs.git ]; preCheck = '' export HOME=$TMPDIR/home ''; @@ -832,7 +879,7 @@ self: super: builtins.intersectAttrs super { (justStaticExecutables super.cabal2nix-unstable) (drv: { buildTools = (drv.buildTools or []) ++ [ - pkgs.makeWrapper + pkgs.buildPackages.makeWrapper ]; postInstall = '' wrapProgram $out/bin/cabal2nix \ @@ -855,7 +902,7 @@ self: super: builtins.intersectAttrs super { # Runtime dependencies and CLI completion nvfetcher = generateOptparseApplicativeCompletion "nvfetcher" (overrideCabal super.nvfetcher (drv: { - buildTools = drv.buildTools or [ ] ++ [ pkgs.makeWrapper ]; + buildTools = drv.buildTools or [ ] ++ [ pkgs.buildPackages.makeWrapper ]; postInstall = drv.postInstall or "" + '' wrapProgram "$out/bin/nvfetcher" --prefix 'PATH' ':' "${ pkgs.lib.makeBinPath [ pkgs.nvchecker pkgs.nix-prefetch-git ] @@ -863,4 +910,8 @@ self: super: builtins.intersectAttrs super { ''; })); + rel8 = addTestToolDepend super.rel8 pkgs.postgresql; + + cachix = generateOptparseApplicativeCompletion "cachix" super.cachix; + } diff --git a/pkgs/development/haskell-modules/hackage-packages.nix b/pkgs/development/haskell-modules/hackage-packages.nix index e0d8cde491c..87864a11e56 100644 --- a/pkgs/development/haskell-modules/hackage-packages.nix +++ b/pkgs/development/haskell-modules/hackage-packages.nix @@ -816,6 +816,42 @@ self: { maintainers = with lib.maintainers; [ abbradar turion ]; }) {inherit (pkgs) emacs;}; + "Agda_2_6_2" = callPackage + ({ mkDerivation, aeson, alex, array, async, base, binary + , blaze-html, boxes, bytestring, Cabal, case-insensitive + , containers, data-hash, deepseq, directory, edit-distance, emacs + , equivalence, exceptions, filepath, ghc-compact, gitrev, happy + , hashable, hashtables, haskeline, monad-control, mtl, murmur-hash + , parallel, pretty, process, regex-tdfa, split, stm, strict + , template-haskell, text, time, transformers, unordered-containers + , uri-encode, zlib + }: + mkDerivation { + pname = "Agda"; + version = "2.6.2"; + sha256 = "159hznnsxg7hlp80r1wqizyd7gwgnq0j13cm4d27cns0ganslb07"; + isLibrary = true; + isExecutable = true; + enableSeparateDataOutput = true; + setupHaskellDepends = [ base Cabal directory filepath process ]; + libraryHaskellDepends = [ + aeson array async base binary blaze-html boxes bytestring + case-insensitive containers data-hash deepseq directory + edit-distance equivalence exceptions filepath ghc-compact gitrev + hashable hashtables haskeline monad-control mtl murmur-hash + parallel pretty process regex-tdfa split stm strict + template-haskell text time transformers unordered-containers + uri-encode zlib + ]; + libraryToolDepends = [ alex happy ]; + executableHaskellDepends = [ base directory filepath process ]; + executableToolDepends = [ emacs ]; + description = "A dependently typed functional programming language and proof assistant"; + license = "unknown"; + hydraPlatforms = lib.platforms.none; + maintainers = with lib.maintainers; [ abbradar turion ]; + }) {inherit (pkgs) emacs;}; + "Agda-executable" = callPackage ({ mkDerivation, Agda, base }: mkDerivation { @@ -1267,8 +1303,8 @@ self: { }: mkDerivation { pname = "BNFC"; - version = "2.9.1"; - sha256 = "0670in07lr9fgkx0c7zci8rn8c7g8nimkmpzy5w9swfp4rp3gbkk"; + version = "2.9.2"; + sha256 = "1wn46a6rw6fwxmqp3b8nz81ag2nphyalm6l2frzg63xbdxnlwgmi"; isLibrary = true; isExecutable = true; setupHaskellDepends = [ base Cabal cabal-doctest ]; @@ -8778,6 +8814,31 @@ self: { license = lib.licenses.bsd3; }) {}; + "HMock" = callPackage + ({ mkDerivation, base, constraints, containers, data-default + , deepseq, directory, doctest-exitcode-stdio, doctest-lib + , exceptions, extra, hspec, monad-control, mono-traversable, mtl + , QuickCheck, regex-tdfa, syb, template-haskell, transformers-base + , unliftio + }: + mkDerivation { + pname = "HMock"; + version = "0.1.0.1"; + sha256 = "1viv8aggapxvk1akm1z3976h4b12wa8zwkr5qinfpvmsgvlkhhlz"; + libraryHaskellDepends = [ + base constraints containers data-default exceptions extra + monad-control mono-traversable mtl regex-tdfa syb template-haskell + transformers-base unliftio + ]; + testHaskellDepends = [ + base containers data-default deepseq directory + doctest-exitcode-stdio doctest-lib exceptions extra hspec mtl + QuickCheck syb template-haskell unliftio + ]; + description = "A flexible mock framework for testing effectful code"; + license = lib.licenses.bsd3; + }) {}; + "HNM" = callPackage ({ mkDerivation, base, containers, directory, glib, gtk, haskell98 , mtl, process, regex-posix, unix @@ -10032,15 +10093,16 @@ self: { "HaskellNet-SSL" = callPackage ({ mkDerivation, base, bytestring, connection, data-default - , HaskellNet, network, tls + , HaskellNet, network, network-bsd }: mkDerivation { pname = "HaskellNet-SSL"; - version = "0.3.4.1"; - sha256 = "0j36zcx5vfg4jzc7vvfj4ifcvcgyy2sn9rxnxj3vg2cw77idqyp1"; + version = "0.3.4.4"; + sha256 = "031d1a8ryzkm3xsyh1gh8d8kxq9i7pc9r5l2vjpkzgba31s5fbia"; enableSeparateDataOutput = true; libraryHaskellDepends = [ - base bytestring connection data-default HaskellNet network tls + base bytestring connection data-default HaskellNet network + network-bsd ]; description = "Helpers to connect to SSL/TLS mail servers with HaskellNet"; license = lib.licenses.bsd3; @@ -13064,8 +13126,8 @@ self: { }: mkDerivation { pname = "MagicHaskeller"; - version = "0.9.6.8"; - sha256 = "1091s8jrynjb76wg5r53kp0siv0dgbsxsb9y2djrq1iz06h01m55"; + version = "0.9.6.10"; + sha256 = "04rfddv8hldjavks7pn3s9p80cgpzlz3x9f9d7y6wyz98zcqxpbf"; isLibrary = true; isExecutable = true; enableSeparateDataOutput = true; @@ -13423,6 +13485,8 @@ self: { pname = "MissingH"; version = "1.4.3.0"; sha256 = "196cniya5wzcv2d777nr0f7hinclpals4ia1mkzzv35870pqr6lw"; + revision = "1"; + editedCabalFile = "0f8x0vpwcbcvy3b421pahx1ff6l3lfaqvvfkyks1vllcr4p8ky9j"; libraryHaskellDepends = [ array base containers directory filepath hslogger mtl network network-bsd old-locale old-time parsec process random regex-compat @@ -15914,12 +15978,11 @@ self: { ({ mkDerivation, base, PortMidi }: mkDerivation { pname = "PortMidi-simple"; - version = "0.1.0.0"; - sha256 = "17bl26jlpd48ag42kbjdirqhpahxaiax5sy7p3j1jylhiargijcd"; + version = "0.1.0.1"; + sha256 = "1xi0117296jxc15vpjxd228p31hb5bm47wakiinlp1rdvvil63lc"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base PortMidi ]; - executableHaskellDepends = [ base PortMidi ]; description = "Simplified PortMidi wrapper"; license = lib.licenses.bsd3; platforms = [ @@ -20368,8 +20431,8 @@ self: { }: mkDerivation { pname = "Unixutils"; - version = "1.54.1"; - sha256 = "0i16fg24n6lwn3jlh09bxdv1ip06ympkfvwmcj1nbcjcfhlmaagr"; + version = "1.54.2"; + sha256 = "040wj8mr2k7spwns3vnadcgynqq4h7zy3lf62lvx7gasjmaj5m4w"; libraryHaskellDepends = [ base bytestring directory exceptions filepath mtl process process-extras pureMD5 regex-tdfa unix zlib @@ -20695,8 +20758,8 @@ self: { ({ mkDerivation, base, bytestring, transformers, vector, vulkan }: mkDerivation { pname = "VulkanMemoryAllocator"; - version = "0.5.1"; - sha256 = "13savwlcdpvskir5v8yb019cxszrsjrkyisws0w8ddc94a3c9x2c"; + version = "0.6"; + sha256 = "15hmvswhwy7g0i5ybsjby8x4dwyg0j381rh425kjzv9qbjp4dw2r"; libraryHaskellDepends = [ base bytestring transformers vector vulkan ]; @@ -21363,24 +21426,6 @@ self: { }) {}; "X11" = callPackage - ({ mkDerivation, base, data-default, libX11, libXext, libXinerama - , libXrandr, libXrender, libXScrnSaver - }: - mkDerivation { - pname = "X11"; - version = "1.9.2"; - sha256 = "013yny4dwbs98kp7245j8dv81h4p1cdwn2rsf2hvhsplg6ixkc05"; - libraryHaskellDepends = [ base data-default ]; - librarySystemDepends = [ - libX11 libXext libXinerama libXrandr libXrender libXScrnSaver - ]; - description = "A binding to the X11 graphics library"; - license = lib.licenses.bsd3; - }) {inherit (pkgs.xorg) libX11; inherit (pkgs.xorg) libXScrnSaver; - inherit (pkgs.xorg) libXext; inherit (pkgs.xorg) libXinerama; - inherit (pkgs.xorg) libXrandr; inherit (pkgs.xorg) libXrender;}; - - "X11_1_10" = callPackage ({ mkDerivation, base, data-default-class, libX11, libXext , libXinerama, libXrandr, libXrender, libXScrnSaver }: @@ -21394,7 +21439,6 @@ self: { ]; description = "A binding to the X11 graphics library"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs.xorg) libX11; inherit (pkgs.xorg) libXScrnSaver; inherit (pkgs.xorg) libXext; inherit (pkgs.xorg) libXinerama; inherit (pkgs.xorg) libXrandr; inherit (pkgs.xorg) libXrender;}; @@ -21878,8 +21922,8 @@ self: { }: mkDerivation { pname = "Z-Data"; - version = "0.8.7.0"; - sha256 = "0a68ymcgmack4z4zz9vb20g2jgs41ga00fc4612rq9qjywn26yxd"; + version = "0.8.8.0"; + sha256 = "01x0z7fv0nyyisc9ras79nwbys4g9d13kxwnvgdi8m9p6jvcgy8s"; setupHaskellDepends = [ base Cabal ]; libraryHaskellDepends = [ base bytestring case-insensitive containers deepseq ghc-prim @@ -23995,6 +24039,8 @@ self: { ]; description = "A full-featured library for parsing, validating, and rendering email addresses"; license = lib.licenses.bsd2; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "adhoc-network" = callPackage @@ -25000,8 +25046,8 @@ self: { }: mkDerivation { pname = "aeson-schemas"; - version = "1.3.3"; - sha256 = "1dhi4pf8ariqr5g79cnr52rxfi1ywp2sv9sazw51rgv1k4gb3492"; + version = "1.3.4"; + sha256 = "087pjsjycna4hlzn72bik4jfd8vclfyqh730zll4a2dc7l776g5x"; libraryHaskellDepends = [ aeson base first-class-families hashable megaparsec template-haskell text unordered-containers @@ -30775,8 +30821,8 @@ self: { ({ mkDerivation, base, ghc-prim, integer-gmp }: mkDerivation { pname = "aop-prelude"; - version = "0.4.1.0"; - sha256 = "1ha39yfmiw61g907h83wsjw9zyvvkzi7zbr3y9dcciv2cgnb5h6a"; + version = "0.4.1.1"; + sha256 = "0b8y58hiil7caqwn3q041r59qvm8jw2s8z8ydhs2ma7a7lrlqffm"; libraryHaskellDepends = [ base ghc-prim integer-gmp ]; testHaskellDepends = [ base ghc-prim ]; description = "prelude for Algebra of Programming"; @@ -32240,6 +32286,7 @@ self: { ]; description = "Distribute hackage packages to archlinux"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; }) {}; "arch-web" = callPackage @@ -33583,6 +33630,8 @@ self: { testToolDepends = [ doctest-discover hspec-discover ]; description = "Library for creating and querying segmented feeds"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "asil" = callPackage @@ -35411,41 +35460,6 @@ self: { }: mkDerivation { pname = "aura"; - version = "3.2.4"; - sha256 = "0d3v3kpy4acd7pyysy5dw25b4154v7jwgydipmrczfxicrf02aa0"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - aeson algebraic-graphs aur base bytestring containers filepath - hashable http-client http-types language-bash megaparsec - network-uri prettyprinter prettyprinter-ansi-terminal rio scheduler - stm text time transformers typed-process versions - ]; - executableHaskellDepends = [ - aeson aur base bytestring containers http-client http-client-tls - megaparsec optparse-applicative prettyprinter - prettyprinter-ansi-terminal rio scheduler text transformers - typed-process versions - ]; - testHaskellDepends = [ - base bytestring containers megaparsec rio tasty tasty-hunit text - versions - ]; - description = "A secure package manager for Arch Linux and the AUR"; - license = lib.licenses.gpl3Only; - hydraPlatforms = lib.platforms.none; - }) {}; - - "aura_3_2_5" = callPackage - ({ mkDerivation, aeson, algebraic-graphs, aur, base, bytestring - , containers, filepath, hashable, http-client, http-client-tls - , http-types, language-bash, megaparsec, network-uri - , optparse-applicative, prettyprinter, prettyprinter-ansi-terminal - , rio, scheduler, stm, tasty, tasty-hunit, text, time, transformers - , typed-process, versions - }: - mkDerivation { - pname = "aura"; version = "3.2.5"; sha256 = "1zrsjcvmhh3y0pahnz2fr944j2xz8sv4dcd9xz08vci4x1lm87hr"; isLibrary = true; @@ -35534,6 +35548,25 @@ self: { license = lib.licenses.bsd3; }) {}; + "authenticate-oauth_1_7" = callPackage + ({ mkDerivation, base, base64-bytestring, blaze-builder, bytestring + , crypto-pubkey-types, data-default, http-client, http-types + , random, RSA, SHA, time, transformers, transformers-compat + }: + mkDerivation { + pname = "authenticate-oauth"; + version = "1.7"; + sha256 = "0y4v46rn0cvm0sr1v8qq1zgzllrlrr3ji5gij1xprgf1zsazcvvl"; + libraryHaskellDepends = [ + base base64-bytestring blaze-builder bytestring crypto-pubkey-types + data-default http-client http-types random RSA SHA time + transformers transformers-compat + ]; + description = "Library to authenticate with OAuth for Haskell web applications"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "authinfo-hs" = callPackage ({ mkDerivation, attoparsec, base, network, text }: mkDerivation { @@ -36044,6 +36077,44 @@ self: { license = lib.licenses.bsd3; }) {}; + "avro_0_5_2_1" = callPackage + ({ mkDerivation, aeson, array, base, base16-bytestring, bifunctors + , binary, bytestring, containers, data-binary-ieee754, deepseq + , directory, doctest, doctest-discover, extra, fail, gauge + , generic-lens, HasBigDecimal, hashable, hedgehog, hspec + , hspec-discover, hw-hspec-hedgehog, lens, lens-aeson, mtl + , QuickCheck, random, raw-strings-qq, scientific, semigroups + , tagged, template-haskell, text, tf-random, time, transformers + , unordered-containers, uuid, vector, zlib + }: + mkDerivation { + pname = "avro"; + version = "0.5.2.1"; + sha256 = "0g10nbcxz5ff7rckbzwb4sxh1qqg6ay5zwakmlxrsfj9srg8dq2d"; + libraryHaskellDepends = [ + aeson array base base16-bytestring bifunctors binary bytestring + containers data-binary-ieee754 deepseq fail HasBigDecimal hashable + mtl raw-strings-qq scientific semigroups tagged template-haskell + text tf-random time unordered-containers uuid vector zlib + ]; + testHaskellDepends = [ + aeson array base base16-bytestring bifunctors binary bytestring + containers directory doctest doctest-discover extra fail + generic-lens HasBigDecimal hashable hedgehog hspec + hw-hspec-hedgehog lens lens-aeson mtl QuickCheck raw-strings-qq + scientific semigroups tagged text tf-random time transformers + unordered-containers uuid vector zlib + ]; + testToolDepends = [ doctest-discover hspec-discover ]; + benchmarkHaskellDepends = [ + aeson base binary bytestring containers deepseq gauge hashable mtl + random raw-strings-qq text transformers unordered-containers vector + ]; + description = "Avro serialization support for Haskell"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "avro-piper" = callPackage ({ mkDerivation, aeson, avro, base, bytestring, conduit , conduit-combinators, conduit-extra, hedgehog, hspec @@ -38152,6 +38223,30 @@ self: { license = lib.licenses.bsd3; }) {}; + "base32_0_2_1_0" = callPackage + ({ mkDerivation, base, bytestring, criterion, deepseq + , ghc-byteorder, memory, QuickCheck, random-bytestring, tasty + , tasty-hunit, tasty-quickcheck, text, text-short + }: + mkDerivation { + pname = "base32"; + version = "0.2.1.0"; + sha256 = "1c1qzbri6m8b2m1cr68vrjbny6wlvfyrbfyzd61s83a3y3w39plp"; + libraryHaskellDepends = [ + base bytestring deepseq ghc-byteorder text text-short + ]; + testHaskellDepends = [ + base bytestring memory QuickCheck random-bytestring tasty + tasty-hunit tasty-quickcheck text text-short + ]; + benchmarkHaskellDepends = [ + base bytestring criterion deepseq memory random-bytestring text + ]; + description = "Fast RFC 4648-compliant Base32 encoding"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "base32-bytestring" = callPackage ({ mkDerivation, base, bits-extras, bytestring, cpu, criterion , hspec, QuickCheck @@ -39560,6 +39655,8 @@ self: { pname = "bench-show"; version = "0.3.1"; sha256 = "0z1fdcdl9chwia9kd5pa9572mc5pmy5bld72axkzg20r7v53sr7k"; + revision = "1"; + editedCabalFile = "08a95i3xwy2yz549hqfwd3j0j6gbsbc62jjmpxnk43yk5dl8dk63"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -39593,8 +39690,8 @@ self: { ({ mkDerivation, base, bytestring, mtl, time }: mkDerivation { pname = "benchpress"; - version = "0.2.2.16"; - sha256 = "0p8wxd7liz7ihqlqhk1l8z3hn7hc24qlf69ykxixp69jx479dkan"; + version = "0.2.2.17"; + sha256 = "17bwjhy4rrlpk7ni16nh2f1yjrjyj392g4h2z3vxrnkjxfadxx3r"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base mtl time ]; @@ -41384,8 +41481,8 @@ self: { ({ mkDerivation, base, bindings-DSL }: mkDerivation { pname = "bindings-libpci"; - version = "0.4.0.0"; - sha256 = "18vjsgvndmxbxvyapxkgkx36qgh2yrdg8dfaqpcd9zr3yl84kxnq"; + version = "0.4.0.1"; + sha256 = "01wsk8qr1wky0x5pmpw3nljrjbxyf3hd2kgd5vsmcn71gj436hl9"; libraryHaskellDepends = [ base bindings-DSL ]; description = "Low level bindings to libpci"; license = lib.licenses.bsd3; @@ -42166,8 +42263,8 @@ self: { ({ mkDerivation, base }: mkDerivation { pname = "birds-of-paradise"; - version = "0.2.1.0"; - sha256 = "0kjwylhya86zqsmc5q6iqrbq4kp3hqxgx3kwam2pv1ls01qdsvvy"; + version = "0.2.1.1"; + sha256 = "0gn1dkycqal2xvmprq6xqz19qnpxvhwck4h8fqc8gq30nzpq143r"; libraryHaskellDepends = [ base ]; testHaskellDepends = [ base ]; description = "Birds of Paradise"; @@ -42462,18 +42559,18 @@ self: { }) {}; "bitcoin-compact-filters" = callPackage - ({ mkDerivation, aeson, base, base16-bytestring, bitstream - , bytestring, cereal, haskoin-core, memory, tasty, tasty-hunit - , tasty-quickcheck, text, transformers + ({ mkDerivation, aeson, base, bitstream, bytestring, cereal + , haskoin-core, memory, tasty, tasty-hunit, tasty-quickcheck, text + , transformers }: mkDerivation { pname = "bitcoin-compact-filters"; - version = "0.1.0.1"; - sha256 = "1ifs7yi34x5nfhy0bs9w6arz7f6kwfxl0wgl6s0iwd1z94s5ysk1"; + version = "0.1.0.2"; + sha256 = "1cay53gbm9r5wrpk0sjq086n08lns20xsqb27hgw6a2hfcj7zai2"; enableSeparateDataOutput = true; libraryHaskellDepends = [ - base base16-bytestring bitstream bytestring cereal haskoin-core - memory text transformers + base bitstream bytestring cereal haskoin-core memory text + transformers ]; testHaskellDepends = [ aeson base bytestring cereal haskoin-core tasty tasty-hunit @@ -44159,8 +44256,8 @@ self: { }: mkDerivation { pname = "blucontrol"; - version = "0.5.0.0"; - sha256 = "1xqwhzxgjn7fza46whp8rdpvsglly577hxjxlaqb67174rq29zgi"; + version = "0.5.1.1"; + sha256 = "0v3ifwxjbxm86ybn5daqqfdm4nmbfzlbkyc19d4nawnzjyf8v2p9"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -44201,6 +44298,8 @@ self: { ]; description = "Configurable blue light filter"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {inherit (pkgs.xorg) libX11; inherit (pkgs.xorg) libXrandr;}; "bluemix-sdk" = callPackage @@ -45197,6 +45296,8 @@ self: { pname = "bounded-array"; version = "0.1.0.0"; sha256 = "0zv5a82rm6hwikgls2hw9d18igvfgw655s5pw5h1xbwcv1d8d0ji"; + revision = "2"; + editedCabalFile = "1j04il1kw0r3sy1dv3b3lffkxvnka7ic25jx174wzd0myqbr9zpr"; libraryHaskellDepends = [ array base ]; description = "Arrays with a value for every index"; license = lib.licenses.bsd3; @@ -46506,8 +46607,8 @@ self: { }: mkDerivation { pname = "bugsnag-hs"; - version = "0.2.0.3"; - sha256 = "0jxanklslf0gjw4gb01yz03p2haxmnrmr5wry451lff17azxwlg5"; + version = "0.2.0.4"; + sha256 = "1g5390vmw979gd30jx6v370kb317mvw2x9sw1z7kv44j19vv4k39"; enableSeparateDataOutput = true; libraryHaskellDepends = [ aeson base bytestring http-client text time unordered-containers @@ -46559,6 +46660,28 @@ self: { license = lib.licenses.bsd3; }) {}; + "bugzilla-redhat_0_3_2" = callPackage + ({ mkDerivation, aeson, base, blaze-builder, bytestring, connection + , containers, hspec, http-conduit, http-types, iso8601-time + , resourcet, text, time, transformers, unordered-containers, vector + }: + mkDerivation { + pname = "bugzilla-redhat"; + version = "0.3.2"; + sha256 = "1f2v2mqbyjlv6xj9vxdzbl1kba5smpkb38dxprp13d33jf2rxamm"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + aeson base blaze-builder bytestring connection containers + http-conduit http-types iso8601-time resourcet text time + transformers unordered-containers vector + ]; + testHaskellDepends = [ aeson base hspec time ]; + description = "A Haskell interface to the Bugzilla native REST API"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "build" = callPackage ({ mkDerivation, algebraic-graphs, base, containers, extra , filepath, mtl, random, transformers @@ -47829,8 +47952,8 @@ self: { pname = "bytestring-trie"; version = "0.2.5.0"; sha256 = "1jpynpyarikxhlc4ifdswvkj0ph9fd5d0vcxhjv0lrv0zwqvv488"; - revision = "1"; - editedCabalFile = "1qpv52ywp8r30s3m9qyjiqiwa6clg3zp095yhs2d4533amprryly"; + revision = "2"; + editedCabalFile = "0z2d6k7w2bzjdjvhk5aa5a8j6x5m84xj03rgb4jb70psifmzkg9f"; libraryHaskellDepends = [ base binary bytestring ]; description = "An efficient finite map from (byte)strings to values"; license = lib.licenses.bsd3; @@ -47952,6 +48075,8 @@ self: { pname = "bzlib"; version = "0.5.1.0"; sha256 = "1n599xwyxghf52kam30k1l2qh8cg91h55c2bgchnqyj103hb7nfy"; + revision = "1"; + editedCabalFile = "0r9b9y5qlz9k8wdzb23jif9wgvxi7r652i9apwzdaq7g1l08i6ky"; libraryHaskellDepends = [ base bytestring ]; librarySystemDepends = [ bzip2 ]; description = "Compression and decompression in the bzip2 format"; @@ -48163,8 +48288,8 @@ self: { }: mkDerivation { pname = "c2hs"; - version = "0.28.7"; - sha256 = "0ib7ayfn37krsnm710x4gxd2i88xv3djnqa737gbw93b0206l571"; + version = "0.28.8"; + sha256 = "0k482wv94jbpwd96a2c2lc7qz9k8072slx7l7943472nzk7k41ir"; isLibrary = false; isExecutable = true; enableSeparateDataOutput = true; @@ -48884,10 +49009,8 @@ self: { }: mkDerivation { pname = "cabal-install-parsers"; - version = "0.4.1"; - sha256 = "1djw4l0z8nsaby2qcm08kvn2p1c35ynzdg25vc815dx2wpw38bh3"; - revision = "1"; - editedCabalFile = "1fhjz4hji57sg00nb8jchvm8b13wn9pknnycgcclvxa3s72rqsf5"; + version = "0.4.2"; + sha256 = "08ny95sryii4nzyy8b2zf15vk329y84gbvpy7302hnjxanc6awx5"; libraryHaskellDepends = [ aeson base base16-bytestring binary binary-instances bytestring Cabal containers cryptohash-sha256 deepseq directory filepath lukko @@ -49689,11 +49812,11 @@ self: { }) {}; "cachix" = callPackage - ({ mkDerivation, async, base, base64-bytestring, boost, bytestring + ({ mkDerivation, async, base, base64-bytestring, bytestring , cachix-api, concurrent-extra, conduit, conduit-extra, containers , cookie, cryptonite, dhall, directory, ed25519, filepath, fsnotify - , here, hspec, hspec-discover, http-client, http-client-tls - , http-conduit, http-types, inline-c, inline-c-cpp, lzma-conduit + , hercules-ci-cnix-store, here, hspec, hspec-discover, http-client + , http-client-tls, http-conduit, http-types, lzma-conduit , megaparsec, memory, mmorph, netrc, nix, optparse-applicative , process, protolude, resourcet, retry, safe-exceptions, servant , servant-auth, servant-auth-client, servant-client @@ -49702,21 +49825,20 @@ self: { }: mkDerivation { pname = "cachix"; - version = "0.6.0"; - sha256 = "1ay3k2npnplvgc44vn3zcyd5rgyfigvij4zil3nwrpdi0psd76nl"; + version = "0.6.1"; + sha256 = "0fgm7035ahlgl3vbk0lqf3l07wagsykmw9z0pkzqqcwh1wlv1np7"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ async base base64-bytestring bytestring cachix-api concurrent-extra conduit conduit-extra containers cookie cryptonite dhall directory - ed25519 filepath fsnotify here http-client http-client-tls - http-conduit http-types inline-c inline-c-cpp lzma-conduit - megaparsec memory mmorph netrc optparse-applicative process - protolude resourcet retry safe-exceptions servant servant-auth + ed25519 filepath fsnotify hercules-ci-cnix-store here http-client + http-client-tls http-conduit http-types lzma-conduit megaparsec + memory mmorph netrc optparse-applicative process protolude + resourcet retry safe-exceptions servant servant-auth servant-auth-client servant-client servant-client-core servant-conduit stm text unix uri-bytestring vector versions ]; - librarySystemDepends = [ boost ]; libraryPkgconfigDepends = [ nix ]; executableHaskellDepends = [ base cachix-api ]; executableToolDepends = [ hspec-discover ]; @@ -49726,7 +49848,8 @@ self: { ]; description = "Command line client for Nix binary cache hosting https://cachix.org"; license = lib.licenses.asl20; - }) {inherit (pkgs) boost; inherit (pkgs) nix;}; + maintainers = with lib.maintainers; [ domenkozar ]; + }) {inherit (pkgs) nix;}; "cachix-api" = callPackage ({ mkDerivation, aeson, base, base16-bytestring, bytestring @@ -49757,6 +49880,7 @@ self: { testToolDepends = [ hspec-discover ]; description = "Servant HTTP API specification for https://cachix.org"; license = lib.licenses.asl20; + maintainers = with lib.maintainers; [ domenkozar ]; }) {}; "cacophony" = callPackage @@ -50093,6 +50217,7 @@ self: { ]; description = "A library for declaring, parsing, and invoking text-input based commands"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; }) {}; "calc" = callPackage @@ -50384,29 +50509,31 @@ self: { ({ mkDerivation, base, base32, bytestring, cereal, constraints , containers, crc, directory, dlist, doctest, filepath, hex-text , leb128-cereal, megaparsec, mtl, optparse-applicative - , prettyprinter, row-types, scientific, smallcheck, split, tasty - , tasty-hunit, tasty-rerun, tasty-smallcheck, template-haskell - , text, transformers, unordered-containers, vector + , parser-combinators, prettyprinter, row-types, scientific + , smallcheck, split, tasty, tasty-hunit, tasty-quickcheck + , tasty-rerun, tasty-smallcheck, template-haskell, text + , transformers, unordered-containers, vector }: mkDerivation { pname = "candid"; - version = "0.1"; - sha256 = "0mg7h936if93wdrhnri07530rnz7mnwlz5hpj1qp4bcwknsjs3b4"; + version = "0.2"; + sha256 = "0cif618n6m9cvlcvr7hk3gnypv2vxaz1qaa63jrxakmkcr1lm028"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base base32 bytestring cereal constraints containers crc dlist - hex-text leb128-cereal megaparsec mtl prettyprinter row-types - scientific split template-haskell text transformers - unordered-containers vector + hex-text leb128-cereal megaparsec mtl parser-combinators + prettyprinter row-types scientific split template-haskell text + transformers unordered-containers vector ]; executableHaskellDepends = [ base bytestring hex-text optparse-applicative prettyprinter text ]; testHaskellDepends = [ base bytestring directory doctest filepath leb128-cereal - prettyprinter row-types smallcheck tasty tasty-hunit tasty-rerun - tasty-smallcheck template-haskell text unordered-containers vector + prettyprinter row-types smallcheck tasty tasty-hunit + tasty-quickcheck tasty-rerun tasty-smallcheck template-haskell text + unordered-containers vector ]; description = "Candid integration"; license = lib.licenses.asl20; @@ -50683,6 +50810,8 @@ self: { ]; description = "OTP-like supervision trees in Haskell"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "capnp" = callPackage @@ -53787,32 +53916,40 @@ self: { "chessIO" = callPackage ({ mkDerivation, attoparsec, base, binary, brick, bytestring - , containers, directory, extra, file-embed, filepath, haskeline - , megaparsec, microlens, microlens-th, MonadRandom, mtl, o-clock - , optparse-applicative, parallel, prettyprinter, process, random - , rosezipper, stm, text, time, unordered-containers, vector, vty + , containers, deepseq, directory, extra, file-embed, filepath + , hashable, haskeline, lens, megaparsec, MonadRandom + , mono-traversable, mtl, o-clock, optparse-applicative, parallel + , prettyprinter, process, random, rosezipper, stm, template-haskell + , text, th-lift-instances, time, unordered-containers, vector + , vector-binary-instances, vector-instances, vty }: mkDerivation { pname = "chessIO"; - version = "0.6.1.1"; - sha256 = "0fnbbxsnfb53pcmqs8bhszbd36d44gn9wz0j029yhfh3i1fy40yy"; + version = "0.7.0.0"; + sha256 = "1jb1c702c58g0pkk43g1mp7clm0wbkq993j880v3p7cxbyj5n9bh"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ - attoparsec base binary bytestring containers extra file-embed - megaparsec MonadRandom o-clock prettyprinter process random stm - text unordered-containers vector + attoparsec base binary bytestring containers deepseq extra + file-embed hashable lens megaparsec MonadRandom mono-traversable + o-clock prettyprinter process random stm template-haskell text + th-lift-instances unordered-containers vector + vector-binary-instances vector-instances ]; executableHaskellDepends = [ - attoparsec base binary brick bytestring containers extra file-embed - filepath haskeline megaparsec microlens microlens-th MonadRandom - mtl o-clock optparse-applicative prettyprinter process random - rosezipper stm text time unordered-containers vector vty + attoparsec base binary brick bytestring containers deepseq extra + file-embed filepath hashable haskeline lens megaparsec MonadRandom + mono-traversable mtl o-clock optparse-applicative prettyprinter + process random rosezipper stm template-haskell text + th-lift-instances time unordered-containers vector + vector-binary-instances vector-instances vty ]; testHaskellDepends = [ - attoparsec base binary bytestring containers directory extra - file-embed megaparsec MonadRandom o-clock parallel prettyprinter - process random stm text time unordered-containers vector + attoparsec base binary bytestring containers deepseq directory + extra file-embed hashable lens megaparsec MonadRandom + mono-traversable o-clock parallel prettyprinter process random stm + template-haskell text th-lift-instances time unordered-containers + vector vector-binary-instances vector-instances ]; description = "Basic chess library"; license = lib.licenses.bsd3; @@ -54840,25 +54977,6 @@ self: { }: mkDerivation { pname = "circular"; - version = "0.3.1.1"; - sha256 = "0m3hw2w9hrxz7qi4vcqfbvqck6k7rzwv49r3il0i69xkxzr1dcgk"; - libraryHaskellDepends = [ aeson base primitive vector ]; - testHaskellDepends = [ - aeson base hspec primitive QuickCheck quickcheck-instances vector - ]; - benchmarkHaskellDepends = [ base criterion vector ]; - description = "Circular fixed-sized mutable vectors"; - license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; - broken = true; - }) {}; - - "circular_0_4_0_0" = callPackage - ({ mkDerivation, aeson, base, criterion, hspec, primitive - , QuickCheck, quickcheck-instances, vector - }: - mkDerivation { - pname = "circular"; version = "0.4.0.0"; sha256 = "1542z19mf0ck3x8n62slw88rbmqy8dgwjlsz145a0i8lb8f79kn1"; libraryHaskellDepends = [ aeson base primitive vector ]; @@ -54938,32 +55056,6 @@ self: { "citeproc" = callPackage ({ mkDerivation, aeson, attoparsec, base, bytestring , case-insensitive, containers, data-default, Diff, directory - , file-embed, filepath, mtl, pandoc-types, pretty, rfc5051, safe - , scientific, text, timeit, transformers, uniplate, vector - , xml-conduit - }: - mkDerivation { - pname = "citeproc"; - version = "0.3.0.9"; - sha256 = "0ky4j6nbn6yp3mny1m045n40jfvbr1iiylcf51hsi228y4m5za9s"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - aeson attoparsec base bytestring case-insensitive containers - data-default file-embed filepath pandoc-types rfc5051 safe - scientific text transformers uniplate vector xml-conduit - ]; - testHaskellDepends = [ - aeson base bytestring containers Diff directory filepath mtl pretty - text timeit transformers - ]; - description = "Generates citations and bibliography from CSL styles"; - license = lib.licenses.bsd2; - }) {}; - - "citeproc_0_4_0_1" = callPackage - ({ mkDerivation, aeson, attoparsec, base, bytestring - , case-insensitive, containers, data-default, Diff, directory , file-embed, filepath, mtl, pandoc-types, pretty, safe, scientific , text, timeit, transformers, unicode-collation, uniplate, vector , xml-conduit @@ -54985,7 +55077,6 @@ self: { ]; description = "Generates citations and bibliography from CSL styles"; license = lib.licenses.bsd2; - hydraPlatforms = lib.platforms.none; }) {}; "citeproc-hs" = callPackage @@ -56500,19 +56591,6 @@ self: { ({ mkDerivation, base, criterion, tasty, tasty-quickcheck }: mkDerivation { pname = "clock"; - version = "0.8"; - sha256 = "0539w9bjw6xbfv9v6aq9hijszxqdnqhilwpbwpql1400ji95r8q8"; - libraryHaskellDepends = [ base ]; - testHaskellDepends = [ base tasty tasty-quickcheck ]; - benchmarkHaskellDepends = [ base criterion ]; - description = "High-resolution clock functions: monotonic, realtime, cputime"; - license = lib.licenses.bsd3; - }) {}; - - "clock_0_8_2" = callPackage - ({ mkDerivation, base, criterion, tasty, tasty-quickcheck }: - mkDerivation { - pname = "clock"; version = "0.8.2"; sha256 = "0qg4ljwmw28vvxjzr4sknh8220abjcx2b0sq3ljqprh3qw8b2p8b"; libraryHaskellDepends = [ base ]; @@ -56520,7 +56598,6 @@ self: { benchmarkHaskellDepends = [ base criterion ]; description = "High-resolution clock functions: monotonic, realtime, cputime"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "clock-extras" = callPackage @@ -56533,6 +56610,8 @@ self: { testHaskellDepends = [ base hspec ]; description = "A couple functions that probably should be in the 'clock' package"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "clocked" = callPackage @@ -57406,6 +57485,28 @@ self: { license = lib.licenses.publicDomain; }) {}; + "co-feldspar" = callPackage + ({ mkDerivation, array, base, constraints, containers + , data-default-class, exception-transformers, hardware-edsl + , imperative-edsl, language-c-quote, language-vhdl, minisat, mtl + , operational-alacarte, signals, simple-smt, srcloc, syntactic + , template-haskell + }: + mkDerivation { + pname = "co-feldspar"; + version = "0.1.0.1"; + sha256 = "03dr7vq3bn4rbafyr2i8m72am98kv2a75963403n68xwc3ifmq3z"; + libraryHaskellDepends = [ + array base constraints containers data-default-class + exception-transformers hardware-edsl imperative-edsl + language-c-quote language-vhdl minisat mtl operational-alacarte + signals simple-smt srcloc syntactic template-haskell + ]; + description = "Hardware software co-design Feldspar"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "co-log" = callPackage ({ mkDerivation, ansi-terminal, base, bytestring, chronos , co-log-core, containers, contravariant, directory, filepath @@ -57648,8 +57749,8 @@ self: { }: mkDerivation { pname = "code-conjure"; - version = "0.3.2"; - sha256 = "1mmsbs9n04vcrhaizxv6z6mkd0w5gvhvrffwyfxpfg995vf19gz9"; + version = "0.3.6"; + sha256 = "01qgxzh9gnajpaqwbvk027y8q8zalxk3d9axxyq6l30mxgjjacsk"; libraryHaskellDepends = [ base express leancheck speculate template-haskell ]; @@ -57794,6 +57895,36 @@ self: { broken = true; }) {}; + "codeforces-cli" = callPackage + ({ mkDerivation, aeson, ansi-terminal, base, base16-bytestring + , bytestring, containers, cryptohash-sha512, directory, extra + , http-client, http-conduit, http-types, open-browser + , optparse-applicative, random, text, time, transformers + }: + mkDerivation { + pname = "codeforces-cli"; + version = "0.1.0"; + sha256 = "11hkmjkp3pbqn1x72yp5zi892hcnh1bq1j3f6iqhf727fblcyrn4"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + aeson ansi-terminal base base16-bytestring bytestring containers + cryptohash-sha512 directory extra http-client http-conduit + http-types open-browser optparse-applicative random text time + transformers + ]; + executableHaskellDepends = [ + aeson ansi-terminal base base16-bytestring bytestring containers + cryptohash-sha512 directory extra http-client http-conduit + http-types open-browser optparse-applicative random text time + transformers + ]; + description = "Command line interface to interact with Codeforces"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + broken = true; + }) {}; + "codemonitor" = callPackage ({ mkDerivation, base, cairo, containers, directory, filepath, gtk , haskell98, hinotify, MissingH, process, regex-posix, time @@ -59043,36 +59174,36 @@ self: { }) {}; "commonmark" = callPackage - ({ mkDerivation, base, bytestring, containers, criterion, parsec - , QuickCheck, tasty, tasty-hunit, tasty-quickcheck, text - , transformers + ({ mkDerivation, base, bytestring, containers, parsec, tasty + , tasty-bench, tasty-hunit, tasty-quickcheck, text, transformers + , unicode-transforms }: mkDerivation { pname = "commonmark"; - version = "0.1.1.4"; - sha256 = "0dpm110svgdf21lf5sfbzjcfryn0v6hhjcs8kkyf167kng2sclfn"; + version = "0.2"; + sha256 = "083xrmyxsgn6ivrxqgmjbqvv4k64n7a330pbf1n7xbsjqh78cg28"; libraryHaskellDepends = [ base bytestring containers parsec text transformers + unicode-transforms ]; testHaskellDepends = [ - base parsec QuickCheck tasty tasty-hunit tasty-quickcheck text - ]; - benchmarkHaskellDepends = [ - base bytestring containers criterion text transformers + base parsec tasty tasty-hunit tasty-quickcheck text + unicode-transforms ]; + benchmarkHaskellDepends = [ base tasty-bench text ]; description = "Pure Haskell commonmark parser"; license = lib.licenses.bsd3; }) {}; - "commonmark_0_2" = callPackage + "commonmark_0_2_1" = callPackage ({ mkDerivation, base, bytestring, containers, parsec, tasty , tasty-bench, tasty-hunit, tasty-quickcheck, text, transformers , unicode-transforms }: mkDerivation { pname = "commonmark"; - version = "0.2"; - sha256 = "083xrmyxsgn6ivrxqgmjbqvv4k64n7a330pbf1n7xbsjqh78cg28"; + version = "0.2.1"; + sha256 = "1vba7v1zaqh811v3j4x42g7mhwvxwgzm997kq1kzd0njby14fq5b"; libraryHaskellDepends = [ base bytestring containers parsec text transformers unicode-transforms @@ -59110,30 +59241,6 @@ self: { }) {}; "commonmark-extensions" = callPackage - ({ mkDerivation, base, bytestring, commonmark, containers - , criterion, emojis, parsec, QuickCheck, tasty, tasty-hunit - , tasty-quickcheck, text, transformers - }: - mkDerivation { - pname = "commonmark-extensions"; - version = "0.2.0.4"; - sha256 = "166ywkh6vyyrrwq7ww68pwzdkwmhi23hjvw28769m010ksimz2wh"; - libraryHaskellDepends = [ - base bytestring commonmark containers emojis parsec text - transformers - ]; - testHaskellDepends = [ - base commonmark parsec QuickCheck tasty tasty-hunit - tasty-quickcheck text - ]; - benchmarkHaskellDepends = [ - base bytestring commonmark containers criterion text transformers - ]; - description = "Pure Haskell commonmark parser"; - license = lib.licenses.bsd3; - }) {}; - - "commonmark-extensions_0_2_1_2" = callPackage ({ mkDerivation, base, commonmark, containers, emojis, filepath , network-uri, parsec, tasty, tasty-bench, tasty-hunit, text , transformers @@ -59152,26 +59259,10 @@ self: { benchmarkHaskellDepends = [ base commonmark tasty-bench text ]; description = "Pure Haskell commonmark parser"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "commonmark-pandoc" = callPackage ({ mkDerivation, base, commonmark, commonmark-extensions - , containers, pandoc-types, text - }: - mkDerivation { - pname = "commonmark-pandoc"; - version = "0.2.0.1"; - sha256 = "12s20s64qad3varxr9bxpvdzx3ajdw58ssmssj9rqqq8k2nlnqh3"; - libraryHaskellDepends = [ - base commonmark commonmark-extensions containers pandoc-types text - ]; - description = "Bridge between commonmark and pandoc AST"; - license = lib.licenses.bsd3; - }) {}; - - "commonmark-pandoc_0_2_1" = callPackage - ({ mkDerivation, base, commonmark, commonmark-extensions , pandoc-types, text }: mkDerivation { @@ -59183,7 +59274,6 @@ self: { ]; description = "Bridge between commonmark and pandoc AST"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "commsec" = callPackage @@ -63151,13 +63241,11 @@ self: { ({ mkDerivation, base }: mkDerivation { pname = "contra-tracer"; - version = "0.1.0.0"; - sha256 = "146g43sqa23n1qg100jvz5m1jcjfxx4rxzmc8559b6apys9ys4br"; - revision = "1"; - editedCabalFile = "1r3rnxlbvfirj4n2vwysh7zkfdwlx3x4p9yjd32hpr3vdikgpvds"; + version = "0.2.0.0"; + sha256 = "1rb2fal2rn02qnp28dsvq3r94b72jkqrp2s1lryhmrdj23jc3swy"; libraryHaskellDepends = [ base ]; description = "Arrow and contravariant tracers"; - license = lib.licenses.bsd3; + license = lib.licenses.asl20; }) {}; "contracheck-applicative" = callPackage @@ -64069,6 +64157,8 @@ self: { librarySystemDepends = [ rocksdb ]; description = "Launches CoreNLP and parses the JSON output"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {inherit (pkgs) rocksdb;}; "cornea" = callPackage @@ -65869,8 +65959,8 @@ self: { pname = "crypto-enigma"; version = "0.1.1.6"; sha256 = "07qxrpwg9r2w2l0d2nrvn703vzsfhchznly93bnr2pfpbwj4iv2z"; - revision = "6"; - editedCabalFile = "1zp6mx1d0dbffc046770mzl1zmwvz4h54xznmmqzbijmnmsc0y3c"; + revision = "7"; + editedCabalFile = "1i5vlza8rl6a4wz4v3l61m6x7phbv1ly0di0cf3v3amz38x828qz"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base containers split text ]; @@ -66250,8 +66340,8 @@ self: { pname = "cryptohash-md5"; version = "0.11.100.1"; sha256 = "1y8q7s2bn4gdknw1wjikdnar2b5pgz3nv3220lxrlgpsf23x82vi"; - revision = "5"; - editedCabalFile = "1dxakry5p9dv9p9h617c0295plrfy2n5k13lsgp4gxwb6yzji9d4"; + revision = "6"; + editedCabalFile = "191nvffcrlyvr5dq99bbdxxl2qx44bla9adkhklyknf7ipqdd4yj"; libraryHaskellDepends = [ base bytestring ]; testHaskellDepends = [ base base16-bytestring bytestring pureMD5 tasty tasty-hunit @@ -66270,8 +66360,8 @@ self: { pname = "cryptohash-sha1"; version = "0.11.100.1"; sha256 = "1aqdxdhxhl9jldh951djpwxx8z7gzaqspxl7iwpl84i5ahrsyy9w"; - revision = "5"; - editedCabalFile = "1qay4qlvmwpllsqn1yd8gyraifx5ydl4chgg3dj4gzgmi36i9n0l"; + revision = "6"; + editedCabalFile = "10rpxrmqgwihmplczglwxf5q3l13z9j3kvi065z884y4dymmnkgc"; libraryHaskellDepends = [ base bytestring ]; testHaskellDepends = [ base base16-bytestring bytestring SHA tasty tasty-hunit @@ -66290,6 +66380,8 @@ self: { pname = "cryptohash-sha256"; version = "0.11.102.0"; sha256 = "0685s4hfighzywvvn05cfff5bl2xz3wq0pfncv6zca4iba3ykmla"; + revision = "1"; + editedCabalFile = "0v5ppc7r2lxbk49h1kwj4b5vyb1dw2fnppykvp5m9rm0p3vhlykr"; configureFlags = [ "-fuse-cbits" ]; isLibrary = true; isExecutable = true; @@ -66315,8 +66407,8 @@ self: { pname = "cryptohash-sha512"; version = "0.11.100.1"; sha256 = "1abi23dr3vzslkh0cx24cdn2gy88jjm4qr6rcm543ajyaywqns8h"; - revision = "5"; - editedCabalFile = "0ccvr3sp7mnllbd430l91b5ij70gg3g05nm9n6qaxzx2vaqdlyc2"; + revision = "6"; + editedCabalFile = "0q9c08qd8ssl428ifa3g30r0lp81a8afcpyv7yzqjp88ihgcnfa6"; libraryHaskellDepends = [ base bytestring ]; testHaskellDepends = [ base base16-bytestring bytestring SHA tasty tasty-hunit @@ -66425,30 +66517,6 @@ self: { }: mkDerivation { pname = "cryptonite"; - version = "0.28"; - sha256 = "1nx568qv25dxhbii7lzf1hbv0dyz95z715mmxjnnrkgpwdm8ibbl"; - revision = "1"; - editedCabalFile = "0hqbpdsj1b4fgisr11a9gmin5r7bqr3f83wc2xxc18dr01xhrw7d"; - libraryHaskellDepends = [ - base basement bytestring deepseq ghc-prim integer-gmp memory - ]; - testHaskellDepends = [ - base bytestring memory tasty tasty-hunit tasty-kat tasty-quickcheck - ]; - benchmarkHaskellDepends = [ - base bytestring deepseq gauge memory random - ]; - description = "Cryptography Primitives sink"; - license = lib.licenses.bsd3; - }) {}; - - "cryptonite_0_29" = callPackage - ({ mkDerivation, base, basement, bytestring, deepseq, gauge - , ghc-prim, integer-gmp, memory, random, tasty, tasty-hunit - , tasty-kat, tasty-quickcheck - }: - mkDerivation { - pname = "cryptonite"; version = "0.29"; sha256 = "13xhp3hshb8x06bw37kp16c9jpjmgfn06nkj9drz745fv8f04fnq"; libraryHaskellDepends = [ @@ -66462,7 +66530,6 @@ self: { ]; description = "Cryptography Primitives sink"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "cryptonite-conduit" = callPackage @@ -66791,15 +66858,15 @@ self: { }) {}; "css-easings" = callPackage - ({ mkDerivation, aeson, base, blaze-markup, data-default + ({ mkDerivation, aeson, base, blaze-markup, data-default, deepseq , QuickCheck, scientific, shakespeare, text }: mkDerivation { pname = "css-easings"; - version = "0.2.1.0"; - sha256 = "0mn3h7fqp4bs7rqjzc05k29man8i77dg1avcajdyysf84azklyrw"; + version = "0.2.2.0"; + sha256 = "0ks42vnvj5qffs5zwnplsrqjd9c90xxlcfgcqdhl0iw5fxxnfipj"; libraryHaskellDepends = [ - aeson base blaze-markup data-default QuickCheck scientific + aeson base blaze-markup data-default deepseq QuickCheck scientific shakespeare text ]; description = "Defining and manipulating css easing strings"; @@ -66852,6 +66919,8 @@ self: { ]; description = "High-performance CSS tokenizer and serializer"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "css-text" = callPackage @@ -73112,6 +73181,21 @@ self: { license = lib.licenses.bsd3; }) {}; + "deriving-trans" = callPackage + ({ mkDerivation, base, lifted-base, monad-control, mtl + , transformers, transformers-base + }: + mkDerivation { + pname = "deriving-trans"; + version = "0.1.0.0"; + sha256 = "1yphl0wjp67b7hc3ys6snlvzk67by070p5vfmwcv7ic688vh1dw4"; + libraryHaskellDepends = [ + base lifted-base monad-control mtl transformers transformers-base + ]; + description = "Derive transformer type classes with DerivingVia"; + license = lib.licenses.bsd3; + }) {}; + "derp" = callPackage ({ mkDerivation, base, containers }: mkDerivation { @@ -74215,6 +74299,7 @@ self: { ]; description = "DI logger wrapped for Polysemy"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; }) {}; "dia-base" = callPackage @@ -74347,8 +74432,8 @@ self: { pname = "diagrams-cairo"; version = "1.4.1.1"; sha256 = "0vyd2yr55n7x71194i18lnbcshdjpnqw4qyq7vj5zx377rsz711k"; - revision = "1"; - editedCabalFile = "1jw499gd9kni1mk3h1hyaz5gz92ly5mi7sk8b9wabxcq5hdm9p94"; + revision = "2"; + editedCabalFile = "0ngbshqmb86sc9djmgkn3zc9l69bn3kdml7ld6qx36dsyq6mafq9"; libraryHaskellDepends = [ array base bytestring cairo colour containers data-default-class diagrams-core diagrams-lib filepath hashable JuicyPixels lens mtl @@ -74391,8 +74476,8 @@ self: { pname = "diagrams-contrib"; version = "1.4.4"; sha256 = "043jpr7lqg708lzmv6cqys7312lfdwnf8ijcnpl4jkbvcwl87c1m"; - revision = "1"; - editedCabalFile = "01m59vs4lagsyqcs3p4472i5b28n2jsr7naj30azrm8s197frbsl"; + revision = "2"; + editedCabalFile = "1mkpq356z7b2q6ifa4f1k7whsmhgn3hww8scacca0q2wnc8p4xjg"; libraryHaskellDepends = [ base circle-packing colour containers cubicbezier data-default data-default-class diagrams-core diagrams-lib diagrams-solve @@ -74686,8 +74771,8 @@ self: { pname = "diagrams-postscript"; version = "1.5"; sha256 = "00j58mc84srjvrf21v6zjxxlbw6b8ahhn1jmbq697w8kw3cvygpa"; - revision = "1"; - editedCabalFile = "1cl7fmqiq9bng7va8kwlcxjmh76p1pm71c3p8242r552s10wqvb6"; + revision = "2"; + editedCabalFile = "0dyji1b8mcxaxwzgckkk3p3ji0prrp7rsin98f1hmyjlj3ih735b"; libraryHaskellDepends = [ base bytestring containers data-default-class diagrams-core diagrams-lib hashable lens monoid-extras mtl semigroups split @@ -75728,8 +75813,8 @@ self: { }: mkDerivation { pname = "diohsc"; - version = "0.1.6.1"; - sha256 = "15shc82ii68dzpa0j9dqi6iyhqa6zbr9g2007c1na42rxhm8fg7j"; + version = "0.1.7"; + sha256 = "0xhpj1dhcppvxv8558aai1azx8i3awv4adwl0vffzwj2kas23gjm"; isLibrary = false; isExecutable = true; executableHaskellDepends = [ @@ -77728,6 +77813,8 @@ self: { ]; description = "DigitalOcean Spaces API bindings"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "dobutok" = callPackage @@ -78184,8 +78271,8 @@ self: { }: mkDerivation { pname = "doctest"; - version = "0.16.3"; - sha256 = "1y1l7aa80qkib1z8lsizgg7fpfdmdwhxvi5m255a42jdkjgn5sfg"; + version = "0.17"; + sha256 = "0f0knggq6yjcznyri35fll619q5jr8vcsbiyvdiz4prkawhaa4pz"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -78287,8 +78374,8 @@ self: { ({ mkDerivation, base, doctest }: mkDerivation { pname = "doctest-driver-gen"; - version = "0.3.0.3"; - sha256 = "0vb062mznjpksrbsf2v599slgnm5jr6dq1frbxii19mcqxjbnzrj"; + version = "0.3.0.4"; + sha256 = "1fbqi4s4ajxhyv4a7nbh3v98limla0z8rfqlh02pwc1a90qpwy1a"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base ]; @@ -79941,6 +80028,24 @@ self: { }: mkDerivation { pname = "dual-tree"; + version = "0.2.2.1"; + sha256 = "17kdfnf0df0z5pkiifxrlmyd1xd7hjjaazd2kzyajl0gd00vbszx"; + libraryHaskellDepends = [ + base monoid-extras newtype-generics semigroups + ]; + testHaskellDepends = [ + base monoid-extras QuickCheck semigroups testing-feat + ]; + description = "Rose trees with cached and accumulating monoidal annotations"; + license = lib.licenses.bsd3; + }) {}; + + "dual-tree_0_2_3_0" = callPackage + ({ mkDerivation, base, monoid-extras, newtype-generics, QuickCheck + , semigroups, testing-feat + }: + mkDerivation { + pname = "dual-tree"; version = "0.2.3.0"; sha256 = "0qyn7kb42wvlcvb1wbf1qx3isc2y6k3hzp5iq6ab0r0llw9g6qlg"; libraryHaskellDepends = [ @@ -79951,6 +80056,7 @@ self: { ]; description = "Rose trees with cached and accumulating monoidal annotations"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; }) {}; "dualizer" = callPackage @@ -80610,6 +80716,33 @@ self: { broken = true; }) {}; + "dynamic-pipeline" = callPackage + ({ mkDerivation, async, base, bytestring, HList, hspec + , hspec-discover, lens, optparse-applicative, QuickCheck, relude + , trifecta, unagi-chan + }: + mkDerivation { + pname = "dynamic-pipeline"; + version = "0.1.0.5"; + sha256 = "0smj2fk7dj0kxfgs00n52bpkvrb4yx0h2bkwabjkag96a867f9gr"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + async base bytestring HList lens relude unagi-chan + ]; + executableHaskellDepends = [ + async base bytestring HList lens optparse-applicative relude + trifecta unagi-chan + ]; + testHaskellDepends = [ + async base bytestring HList hspec lens QuickCheck relude unagi-chan + ]; + testToolDepends = [ hspec-discover ]; + description = "Library Type Safe implementation of Dynamic Pipeline Paradigm (DPP)"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "dynamic-plot" = callPackage ({ mkDerivation, base, colour, colour-space, constrained-categories , containers, data-default, deepseq, diagrams-cairo, diagrams-core @@ -81694,6 +81827,31 @@ self: { broken = true; }) {}; + "effectful" = callPackage + ({ mkDerivation, base, containers, exceptions, freer-simple + , fused-effects, ghc-prim, lifted-async, lifted-base, monad-control + , mtl, polysemy, primitive, resourcet, tasty, tasty-bench + , tasty-hunit, transformers, transformers-base, unliftio + , unliftio-core + }: + mkDerivation { + pname = "effectful"; + version = "0.0.0.0"; + sha256 = "1k0cfryskdgqldsf7pan42bq6zc7n5xmm2j00sizdlxd0ssd9axd"; + libraryHaskellDepends = [ + base containers exceptions ghc-prim monad-control primitive + resourcet transformers transformers-base unliftio-core + ]; + testHaskellDepends = [ + base exceptions lifted-async lifted-base tasty tasty-hunit unliftio + ]; + benchmarkHaskellDepends = [ + base freer-simple fused-effects mtl polysemy tasty-bench + ]; + description = "A simple, yet powerful extensible effects library"; + license = lib.licenses.bsd3; + }) {}; + "effective-aspects" = callPackage ({ mkDerivation, base, Cabal, ghc-prim, hashtables, HUnit, mtl , QuickCheck, test-framework, test-framework-hunit @@ -83098,25 +83256,8 @@ self: { }: mkDerivation { pname = "elynx"; - version = "0.5.0.2"; - sha256 = "1hky4amw78ciblr6alcxp79dshsc5wqswp16hbqdry132xps9dw3"; - isLibrary = false; - isExecutable = true; - executableHaskellDepends = [ - aeson base bytestring elynx-tools optparse-applicative slynx tlynx - ]; - description = "Validate and (optionally) redo ELynx analyses"; - license = lib.licenses.gpl3Plus; - }) {}; - - "elynx_0_5_1_0" = callPackage - ({ mkDerivation, aeson, base, bytestring, elynx-tools - , optparse-applicative, slynx, tlynx - }: - mkDerivation { - pname = "elynx"; - version = "0.5.1.0"; - sha256 = "05i3g1c7kdnji46y17215nv9vk21w3zi26z1ngqa8dnfswfx1d0i"; + version = "0.5.1.1"; + sha256 = "1jh46yy7i45bym0cgvj4nik0a7yv82grncfmn3dk4rr70r9wvdwa"; isLibrary = false; isExecutable = true; executableHaskellDepends = [ @@ -83124,7 +83265,6 @@ self: { ]; description = "Validate and (optionally) redo ELynx analyses"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "elynx-markov" = callPackage @@ -83134,29 +83274,8 @@ self: { }: mkDerivation { pname = "elynx-markov"; - version = "0.5.0.2"; - sha256 = "0wlcq3q26lgwixhsq1afz9i3phr2sncwc0r6m4adminh9m1zdr5z"; - libraryHaskellDepends = [ - async attoparsec base bytestring containers elynx-seq hmatrix - integration math-functions mwc-random primitive statistics vector - ]; - testHaskellDepends = [ - base containers elynx-tools hmatrix hspec mwc-random vector - ]; - benchmarkHaskellDepends = [ base ]; - description = "Simulate molecular sequences along trees"; - license = lib.licenses.gpl3Plus; - }) {}; - - "elynx-markov_0_5_1_0" = callPackage - ({ mkDerivation, async, attoparsec, base, bytestring, containers - , elynx-seq, elynx-tools, hmatrix, hspec, integration - , math-functions, mwc-random, primitive, statistics, vector - }: - mkDerivation { - pname = "elynx-markov"; - version = "0.5.1.0"; - sha256 = "1wpq62in9zlap01an6swdf9n1x2pall1vfh4hw5r7zpn7vik1mfx"; + version = "0.5.1.1"; + sha256 = "0j2xg8iszkf3m1xlmrkm6mq3mqnfnc11pbar288r5alva7ssl1vb"; libraryHaskellDepends = [ async attoparsec base bytestring containers elynx-seq hmatrix integration math-functions mwc-random primitive statistics vector @@ -83167,32 +83286,18 @@ self: { benchmarkHaskellDepends = [ base ]; description = "Simulate molecular sequences along trees"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "elynx-nexus" = callPackage ({ mkDerivation, attoparsec, base, bytestring, hspec }: mkDerivation { pname = "elynx-nexus"; - version = "0.5.0.2"; - sha256 = "1y7ndj216w58s85bfgp4vg7zi1asj6br68k000hy4a8cchjprlp9"; - libraryHaskellDepends = [ attoparsec base bytestring ]; - testHaskellDepends = [ base hspec ]; - description = "Import and export Nexus files"; - license = lib.licenses.gpl3Plus; - }) {}; - - "elynx-nexus_0_5_1_0" = callPackage - ({ mkDerivation, attoparsec, base, bytestring, hspec }: - mkDerivation { - pname = "elynx-nexus"; - version = "0.5.1.0"; - sha256 = "0inl9bw7793zbji42gasj4vckigzmr1l4yqf66f9ss958pmgh5n9"; + version = "0.5.1.1"; + sha256 = "1p5x2in4r63amb9ifrxdqb3b9bjrxy97gwij0p3hsh9h8p7wsijg"; libraryHaskellDepends = [ attoparsec base bytestring ]; testHaskellDepends = [ base hspec ]; description = "Import and export Nexus files"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "elynx-seq" = callPackage @@ -83202,28 +83307,8 @@ self: { }: mkDerivation { pname = "elynx-seq"; - version = "0.5.0.2"; - sha256 = "11nl8gw05gvd6j7dflqzi21kixmm0jalpqv9x9f6bb7qwdv1xak2"; - libraryHaskellDepends = [ - aeson attoparsec base bytestring containers matrices mwc-random - parallel primitive vector vector-th-unbox word8 - ]; - testHaskellDepends = [ - base bytestring elynx-tools hspec matrices vector - ]; - description = "Handle molecular sequences"; - license = lib.licenses.gpl3Plus; - }) {}; - - "elynx-seq_0_5_1_0" = callPackage - ({ mkDerivation, aeson, attoparsec, base, bytestring, containers - , elynx-tools, hspec, matrices, mwc-random, parallel, primitive - , vector, vector-th-unbox, word8 - }: - mkDerivation { - pname = "elynx-seq"; - version = "0.5.1.0"; - sha256 = "069fj6ap0yj5bn2r3d5bk85dy02r3fr8prd5hvky6l5gxvpvzcm0"; + version = "0.5.1.1"; + sha256 = "0cjm8i44i8zqkh7x5rwf0g45fji6k6mq6h47hiphybax6a16zaxb"; libraryHaskellDepends = [ aeson attoparsec base bytestring containers matrices mwc-random parallel primitive vector vector-th-unbox word8 @@ -83233,33 +83318,10 @@ self: { ]; description = "Handle molecular sequences"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "elynx-tools" = callPackage ({ mkDerivation, aeson, attoparsec, base, base16-bytestring - , bytestring, cryptohash-sha256, deepseq, directory, fast-logger - , hmatrix, monad-control, monad-logger, mwc-random - , optparse-applicative, primitive, template-haskell, text, time - , transformers, transformers-base, vector, zlib - }: - mkDerivation { - pname = "elynx-tools"; - version = "0.5.0.2"; - sha256 = "1q62f0b0fk6g2a4w5bbbpldv0awk7cn2q544xcxplanpr3fmaj8v"; - libraryHaskellDepends = [ - aeson attoparsec base base16-bytestring bytestring - cryptohash-sha256 deepseq directory fast-logger hmatrix - monad-control monad-logger mwc-random optparse-applicative - primitive template-haskell text time transformers transformers-base - vector zlib - ]; - description = "Tools for ELynx"; - license = lib.licenses.gpl3Plus; - }) {}; - - "elynx-tools_0_5_1_0" = callPackage - ({ mkDerivation, aeson, attoparsec, base, base16-bytestring , bytestring, cryptohash-sha256, deepseq, directory, hmatrix , monad-control, monad-logger, mwc-random, optparse-applicative , primitive, template-haskell, text, time, transformers @@ -83267,8 +83329,8 @@ self: { }: mkDerivation { pname = "elynx-tools"; - version = "0.5.1.0"; - sha256 = "0djfxqxc5aivvljzi7c8xabi7k23y7gnk5wqmdvw4riqpsc7by0y"; + version = "0.5.1.1"; + sha256 = "16cw9afpnczwrqhgyzy3vc7c6b9zx88ja94h34k2gi3960rfxf53"; libraryHaskellDepends = [ aeson attoparsec base base16-bytestring bytestring cryptohash-sha256 deepseq directory hmatrix monad-control @@ -83278,7 +83340,6 @@ self: { ]; description = "Tools for ELynx"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "elynx-tree" = callPackage @@ -83289,33 +83350,8 @@ self: { }: mkDerivation { pname = "elynx-tree"; - version = "0.5.0.2"; - sha256 = "1ywqbc80hq4dprzrrq9gyi7h2624i2mgpd43pv045dldh7dqhygn"; - libraryHaskellDepends = [ - aeson attoparsec base bytestring comonad containers deepseq - double-conversion elynx-nexus math-functions mwc-random parallel - primitive statistics - ]; - testHaskellDepends = [ - attoparsec base bytestring containers elynx-tools hspec QuickCheck - ]; - benchmarkHaskellDepends = [ - base criterion elynx-tools microlens mwc-random parallel - ]; - description = "Handle phylogenetic trees"; - license = lib.licenses.gpl3Plus; - }) {}; - - "elynx-tree_0_5_1_0" = callPackage - ({ mkDerivation, aeson, attoparsec, base, bytestring, comonad - , containers, criterion, deepseq, double-conversion, elynx-nexus - , elynx-tools, hspec, math-functions, microlens, mwc-random - , parallel, primitive, QuickCheck, statistics - }: - mkDerivation { - pname = "elynx-tree"; - version = "0.5.1.0"; - sha256 = "117my1fv16yw51qf0aa7mi6311d98jfmpvpsivwxyayhwi55g2q6"; + version = "0.5.1.1"; + sha256 = "0wjhj48jbyjvmydsa9wcppzlambm2r5pmd5wjfjn0k7s5sc3zf5k"; libraryHaskellDepends = [ aeson attoparsec base bytestring comonad containers deepseq double-conversion elynx-nexus math-functions mwc-random parallel @@ -83329,7 +83365,6 @@ self: { ]; description = "Handle phylogenetic trees"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "ema" = callPackage @@ -85394,6 +85429,35 @@ self: { license = lib.licenses.bsd3; }) {}; + "esqueleto_3_5_1_0" = callPackage + ({ mkDerivation, aeson, attoparsec, base, blaze-html, bytestring + , conduit, containers, exceptions, hspec, hspec-core, monad-logger + , mtl, mysql, mysql-simple, persistent, persistent-mysql + , persistent-postgresql, persistent-sqlite, postgresql-simple + , QuickCheck, resourcet, tagged, text, time, transformers, unliftio + , unordered-containers + }: + mkDerivation { + pname = "esqueleto"; + version = "3.5.1.0"; + sha256 = "1r77lym11gh53059b3hg5wyzb4ymaynk5awrmzgnwfkmx041sqp8"; + libraryHaskellDepends = [ + aeson attoparsec base blaze-html bytestring conduit containers + monad-logger persistent resourcet tagged text time transformers + unliftio unordered-containers + ]; + testHaskellDepends = [ + aeson attoparsec base blaze-html bytestring conduit containers + exceptions hspec hspec-core monad-logger mtl mysql mysql-simple + persistent persistent-mysql persistent-postgresql persistent-sqlite + postgresql-simple QuickCheck resourcet tagged text time + transformers unliftio unordered-containers + ]; + description = "Type-safe EDSL for SQL queries on persistent backends"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "ess" = callPackage ({ mkDerivation, base }: mkDerivation { @@ -86328,8 +86392,8 @@ self: { }: mkDerivation { pname = "eventlog2html"; - version = "0.9.0"; - sha256 = "1cjnkqdnk76839dl4dbpj3vzbkrjwgqryq2j3sgs9mmxfing7ahq"; + version = "0.9.1"; + sha256 = "17fp0q44lk3nkqzpilxlvzbr0b25girbh7j18yl6blcp5mcmq2cd"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -88165,8 +88229,8 @@ self: { }: mkDerivation { pname = "extrapolate"; - version = "0.4.4"; - sha256 = "0indkjjahlh1isnal93w3iliy59azgdmi9lmdqz4jkbpd421zava"; + version = "0.4.6"; + sha256 = "0452b377ar95jshb5qdjcyxx54r707rxyxq0xkha55zxffp0dxq4"; libraryHaskellDepends = [ base express leancheck speculate template-haskell ]; @@ -88560,6 +88624,43 @@ self: { broken = true; }) {}; + "fakedata_1_0" = callPackage + ({ mkDerivation, attoparsec, base, bytestring, containers, deepseq + , directory, exceptions, fakedata-parser, filepath, gauge, hashable + , hspec, hspec-discover, QuickCheck, random, regex-tdfa + , string-random, template-haskell, text, time, transformers + , unordered-containers, vector, yaml + }: + mkDerivation { + pname = "fakedata"; + version = "1.0"; + sha256 = "1bbb90i6pm8ih1br81hwwz2bb2yvkx6fv44xkw0qv741n9a9rcz0"; + enableSeparateDataOutput = true; + libraryHaskellDepends = [ + attoparsec base bytestring containers directory exceptions + fakedata-parser filepath hashable QuickCheck random regex-tdfa + string-random template-haskell text time transformers + unordered-containers vector yaml + ]; + testHaskellDepends = [ + attoparsec base bytestring containers directory exceptions + fakedata-parser filepath hashable hspec QuickCheck random + regex-tdfa string-random template-haskell text time transformers + unordered-containers vector yaml + ]; + testToolDepends = [ hspec-discover ]; + benchmarkHaskellDepends = [ + attoparsec base bytestring containers deepseq directory exceptions + fakedata-parser filepath gauge hashable QuickCheck random + regex-tdfa string-random template-haskell text time transformers + unordered-containers vector yaml + ]; + description = "Library for producing fake data"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; + }) {}; + "fakedata-parser" = callPackage ({ mkDerivation, attoparsec, base, hspec, text }: mkDerivation { @@ -88636,8 +88737,8 @@ self: { }: mkDerivation { pname = "faktory"; - version = "1.0.3.0"; - sha256 = "1igarcl4cvipndg9rhg4lpcrl09mbfkpqcp3prr14izclcldr47y"; + version = "1.0.3.1"; + sha256 = "0af9wsx3fl701an3bsp7daxa4hxv7pdj16y7cypj3cvdwav5wdsg"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -88656,7 +88757,7 @@ self: { broken = true; }) {}; - "faktory_1_0_3_1" = callPackage + "faktory_1_1_0_0" = callPackage ({ mkDerivation, aeson, aeson-casing, async, base, bytestring , connection, cryptonite, errors, hspec, markdown-unlit, megaparsec , memory, mtl, network, random, safe-exceptions, scanner @@ -88664,8 +88765,8 @@ self: { }: mkDerivation { pname = "faktory"; - version = "1.0.3.1"; - sha256 = "0af9wsx3fl701an3bsp7daxa4hxv7pdj16y7cypj3cvdwav5wdsg"; + version = "1.1.0.0"; + sha256 = "0bxwrrypkwhq7whaj79dkibad022bdxd8r5vh1dnd4aka3bdk8mj"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -88675,7 +88776,7 @@ self: { ]; executableHaskellDepends = [ aeson base safe-exceptions ]; testHaskellDepends = [ - aeson async base hspec markdown-unlit time + aeson async base hspec markdown-unlit mtl time ]; testToolDepends = [ markdown-unlit ]; description = "Faktory Worker for Haskell"; @@ -93986,8 +94087,8 @@ self: { pname = "force-layout"; version = "0.4.0.6"; sha256 = "17956k3mab2xhrmfy7fj5gh08h43yjlsryi5acjhnkmin5arhwpp"; - revision = "6"; - editedCabalFile = "0vhb3ysfi483zfp351ywjc6cg1ihz44wq137zbrkrkigxa3qhg8f"; + revision = "7"; + editedCabalFile = "07508rqcarhrw4i22sszr4mplxk8m61g0c3rm273ga89bajf9nja"; libraryHaskellDepends = [ base containers data-default-class lens linear ]; @@ -94282,24 +94383,6 @@ self: { }) {}; "formatting" = callPackage - ({ mkDerivation, array, base, bytestring, clock, ghc-prim, hspec - , integer-gmp, old-locale, scientific, semigroups, text, time - , transformers - }: - mkDerivation { - pname = "formatting"; - version = "6.3.7"; - sha256 = "06jwb1pmh15f2b9dfplm64y9yszazg26m4h7rl4dn4inqg14znqc"; - libraryHaskellDepends = [ - array base bytestring clock ghc-prim integer-gmp old-locale - scientific semigroups text time transformers - ]; - testHaskellDepends = [ base hspec semigroups text ]; - description = "Combinator-based type-safe formatting (like printf() or FORMAT)"; - license = lib.licenses.bsd3; - }) {}; - - "formatting_7_1_2" = callPackage ({ mkDerivation, base, clock, criterion, double-conversion , ghc-prim, hspec, old-locale, QuickCheck, scientific, text, time , transformers @@ -94318,7 +94401,6 @@ self: { ]; description = "Combinator-based type-safe formatting (like printf() or FORMAT)"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "forml" = callPackage @@ -96250,8 +96332,8 @@ self: { }: mkDerivation { pname = "ftdi"; - version = "0.3.0.0"; - sha256 = "1yhcpd9jzhmvlmhidyv70s5mvakq6jn9lb3zh132lrqsrirbmpx8"; + version = "0.3.0.1"; + sha256 = "0xa1dld03ai3mxqywia3f9pvyz67slw7dai8m97iqg1xysd8ykzr"; libraryHaskellDepends = [ async base base-unicode-symbols bytestring transformers usb vector ]; @@ -97087,6 +97169,8 @@ self: { benchmarkHaskellDepends = [ base fused-effects-random gauge ]; description = "High-quality random number generation as an effect"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "fused-effects-optics" = callPackage @@ -97236,47 +97320,6 @@ self: { }: mkDerivation { pname = "futhark"; - version = "0.19.4"; - sha256 = "1d4704pmknv39yw2bjxkp5n2wl9a14n3pn221m3src5z237lchq7"; - revision = "1"; - editedCabalFile = "1d8vwgdvj1dib7l4a3lhn03ri2mbnm57wnd3pki6m7y8sr3xk730"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - aeson ansi-terminal array base binary blaze-html bmp bytestring - bytestring-to-vector cmark-gfm containers directory directory-tree - dlist file-embed filepath free gitrev hashable haskeline - language-c-quote mainland-pretty megaparsec mtl neat-interpolation - parallel pcg-random process process-extras regex-tdfa srcloc - template-haskell temporary terminal-size text time transformers - unordered-containers utf8-string vector vector-binary-instances - versions zip-archive zlib - ]; - libraryToolDepends = [ alex happy ]; - executableHaskellDepends = [ base text ]; - testHaskellDepends = [ - base containers megaparsec mtl parser-combinators QuickCheck tasty - tasty-hunit tasty-quickcheck text - ]; - description = "An optimising compiler for a functional, array-oriented language"; - license = lib.licenses.isc; - }) {}; - - "futhark_0_19_6" = callPackage - ({ mkDerivation, aeson, alex, ansi-terminal, array, base, binary - , blaze-html, bmp, bytestring, bytestring-to-vector, cmark-gfm - , containers, directory, directory-tree, dlist, file-embed - , filepath, free, gitrev, happy, hashable, haskeline - , language-c-quote, mainland-pretty, megaparsec, mtl - , neat-interpolation, parallel, parser-combinators, pcg-random - , process, process-extras, QuickCheck, regex-tdfa, srcloc, tasty - , tasty-hunit, tasty-quickcheck, template-haskell, temporary - , terminal-size, text, time, transformers, unordered-containers - , utf8-string, vector, vector-binary-instances, versions - , zip-archive, zlib - }: - mkDerivation { - pname = "futhark"; version = "0.19.6"; sha256 = "1wpg2ad2xv60xsdvnq3246nps3ldc00n58k7jxmh8lrx5bjzg263"; isLibrary = true; @@ -97299,7 +97342,6 @@ self: { ]; description = "An optimising compiler for a functional, array-oriented language"; license = lib.licenses.isc; - hydraPlatforms = lib.platforms.none; }) {}; "futhark-data" = callPackage @@ -97323,6 +97365,22 @@ self: { license = lib.licenses.isc; }) {}; + "futhark-server" = callPackage + ({ mkDerivation, base, binary, bytestring, directory, futhark-data + , mtl, process, temporary, text + }: + mkDerivation { + pname = "futhark-server"; + version = "1.0.0.0"; + sha256 = "00b0qblbx6sg6nk15zasbhbw9i63dmmpcsqdkqvxskr31qzj6vaa"; + libraryHaskellDepends = [ + base binary bytestring directory futhark-data mtl process temporary + text + ]; + description = "Client implementation of the Futhark server protocol"; + license = lib.licenses.isc; + }) {}; + "futhask" = callPackage ({ mkDerivation, base, directory, raw-strings-qq, split }: mkDerivation { @@ -98943,25 +99001,6 @@ self: { }: mkDerivation { pname = "generic-deriving"; - version = "1.13.1"; - sha256 = "1glsl15dc40wn1r851bray6i450g82xa2n0q53p1i3p5x903mdg9"; - revision = "1"; - editedCabalFile = "1278ipm12h6xhz8mwam065kj62wiw11d3amc6iifx0qzyxiyg5cm"; - libraryHaskellDepends = [ - base containers ghc-prim template-haskell th-abstraction - ]; - testHaskellDepends = [ base hspec template-haskell ]; - testToolDepends = [ hspec-discover ]; - description = "Generic programming library for generalised deriving"; - license = lib.licenses.bsd3; - }) {}; - - "generic-deriving_1_14" = callPackage - ({ mkDerivation, base, containers, ghc-prim, hspec, hspec-discover - , template-haskell, th-abstraction - }: - mkDerivation { - pname = "generic-deriving"; version = "1.14"; sha256 = "00nbnxxkxyjfzj3zf6sxh3im24qv485w4jb1gj36c2wn4gjdbayh"; revision = "1"; @@ -98973,7 +99012,6 @@ self: { testToolDepends = [ hspec-discover ]; description = "Generic programming library for generalised deriving"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "generic-enum" = callPackage @@ -99154,6 +99192,8 @@ self: { pname = "generic-monoid"; version = "0.1.0.1"; sha256 = "1pradfv1i2z73f3vxx78ahmfsdszcgi44kn29aww2hdgf2np5l6g"; + revision = "1"; + editedCabalFile = "17dfarnbv6si8rgajb3jqsbc4k1nxmvga2h1lhmpnq43n2fdkqkq"; libraryHaskellDepends = [ base ]; description = "Derive monoid instances for product types"; license = lib.licenses.bsd3; @@ -99611,6 +99651,18 @@ self: { license = lib.licenses.bsd3; }) {}; + "geniplate-mirror_0_7_8" = callPackage + ({ mkDerivation, base, mtl, template-haskell }: + mkDerivation { + pname = "geniplate-mirror"; + version = "0.7.8"; + sha256 = "1kw4q7l556sfd82r2p0z3cv4sg8kcr45wb4s2sy996bs3ymn8fjb"; + libraryHaskellDepends = [ base mtl template-haskell ]; + description = "Use Template Haskell to generate Uniplate-like functions"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "geniserver" = callPackage ({ mkDerivation, base, bytestring, cmdargs, GenI, http-types, json , snap-core, snap-server, text, transformers, utf8-string @@ -99674,6 +99726,21 @@ self: { license = lib.licenses.mit; }) {}; + "genvalidity_0_11_0_2" = callPackage + ({ mkDerivation, base, hspec, hspec-core, QuickCheck, random + , validity + }: + mkDerivation { + pname = "genvalidity"; + version = "0.11.0.2"; + sha256 = "16bd5dx0ngc8z7mij23i2l3a8v3c112x8ksd623alik18zx7pi8j"; + libraryHaskellDepends = [ base QuickCheck random validity ]; + testHaskellDepends = [ base hspec hspec-core QuickCheck ]; + description = "Testing utilities for the validity library"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "genvalidity-aeson" = callPackage ({ mkDerivation, aeson, base, genvalidity, genvalidity-hspec , genvalidity-scientific, genvalidity-text @@ -100475,6 +100542,21 @@ self: { broken = true; }) {}; + "geomancy" = callPackage + ({ mkDerivation, base, criterion, deepseq, hedgehog, linear }: + mkDerivation { + pname = "geomancy"; + version = "0.2.2.3"; + sha256 = "17xg6cxyl83dxlb1yv85cnavw8cgqj3mbr1v9sa46fawb4mlv9i8"; + revision = "1"; + editedCabalFile = "06cfw1jf1380cxqc5ywj768svym7nm0rmrglhjkfz6p29arc6hwr"; + libraryHaskellDepends = [ base deepseq ]; + testHaskellDepends = [ base deepseq hedgehog linear ]; + benchmarkHaskellDepends = [ base criterion deepseq linear ]; + description = "Geometry and matrix manipulation"; + license = lib.licenses.bsd3; + }) {}; + "geos" = callPackage ({ mkDerivation, base, bytestring, cassava, geos, hspec, mtl , transformers, vector @@ -100769,8 +100851,8 @@ self: { }: mkDerivation { pname = "ghc-check"; - version = "0.5.0.4"; - sha256 = "05yrj2xm3b44h2c5r5qxsfwm1v89zhv0l30wdcc6439hd94w1w8q"; + version = "0.5.0.5"; + sha256 = "0ml5v9r729i24dwj54fh8fqr55xbndc7wpbkzaids4r666hsjlsi"; libraryHaskellDepends = [ base containers directory filepath ghc ghc-paths process safe-exceptions template-haskell th-compat transformers @@ -100876,6 +100958,100 @@ self: { broken = true; }) {}; + "ghc-debug-brick" = callPackage + ({ mkDerivation, base, brick, containers, cursor, directory + , filepath, ghc-debug-client, ghc-debug-common + , ghc-debug-convention, microlens, microlens-platform, text, time + , unordered-containers, vty + }: + mkDerivation { + pname = "ghc-debug-brick"; + version = "0.1.0.0"; + sha256 = "1gndynk42ln3hp0lg1y4rjzz6kmgp68lw077dj4zbbsam9skfgs0"; + isLibrary = false; + isExecutable = true; + executableHaskellDepends = [ + base brick containers cursor directory filepath ghc-debug-client + ghc-debug-common ghc-debug-convention microlens microlens-platform + text time unordered-containers vty + ]; + description = "A simple TUI using ghc-debug"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + + "ghc-debug-client" = callPackage + ({ mkDerivation, async, base, binary, bitwise, containers + , directory, dom-lt, eventlog2html, filepath, ghc-debug-common + , ghc-debug-convention, ghc-prim, hashable, haxl, language-dot + , monoidal-containers, mtl, network, process, psqueues, stm, text + , unordered-containers + }: + mkDerivation { + pname = "ghc-debug-client"; + version = "0.1.0.0"; + sha256 = "1sl0xa7dhgnqprmi6sfbxzxz9m0vkni262s1ks09dkqs52bv68sx"; + libraryHaskellDepends = [ + async base binary bitwise containers directory dom-lt eventlog2html + filepath ghc-debug-common ghc-debug-convention ghc-prim hashable + haxl language-dot monoidal-containers mtl network process psqueues + stm text unordered-containers + ]; + description = "Useful functions for writing heap analysis tools which use ghc-debug"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + + "ghc-debug-common" = callPackage + ({ mkDerivation, array, base, binary, bytestring, containers, cpu + , deepseq, directory, dom-lt, filepath, ghc-debug-convention + , ghc-heap, hashable, transformers, unordered-containers + }: + mkDerivation { + pname = "ghc-debug-common"; + version = "0.1.0.0"; + sha256 = "088ir70k1ssyri4w76si0bn186lq08hzdfhdr09bmx80dmyp5vzy"; + libraryHaskellDepends = [ + array base binary bytestring containers cpu deepseq directory + dom-lt filepath ghc-debug-convention ghc-heap hashable transformers + unordered-containers + ]; + description = "Connect to a socket created by ghc-debug-stub and analyse the heap of the debuggee program"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + + "ghc-debug-convention" = callPackage + ({ mkDerivation, base, directory, filepath }: + mkDerivation { + pname = "ghc-debug-convention"; + version = "0.1.0.0"; + sha256 = "1cgsilxnz4dmx3y27qysyhf3jhsvj402wb0f50l30kqmlr0cp1hj"; + libraryHaskellDepends = [ base directory filepath ]; + description = "Definitions needed by ghc-debug-stub and ghc-debug-common"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; + }) {}; + + "ghc-debug-stub" = callPackage + ({ mkDerivation, base, directory, filepath, ghc-debug-convention + , ghc-prim + }: + mkDerivation { + pname = "ghc-debug-stub"; + version = "0.1.0.0"; + sha256 = "1gwp2hq3pxp9d4m4l30iwxlkd5ha9wk9mlhnlppiha09vdccd04r"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + base directory filepath ghc-debug-convention ghc-prim + ]; + description = "Functions for instrumenting your application so the heap can be analysed with ghc-debug-common"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "ghc-dump-core" = callPackage ({ mkDerivation, base, bytestring, directory, filepath, ghc , serialise, text @@ -101856,6 +102032,18 @@ self: { license = lib.licenses.bsd2; }) {}; + "ghc-tcplugins-extra_0_4_2" = callPackage + ({ mkDerivation, base, ghc }: + mkDerivation { + pname = "ghc-tcplugins-extra"; + version = "0.4.2"; + sha256 = "1gddqcczb8ixmrlfbfb06dc470jsjhvsxx3q2nsd4mcx2x6jdk08"; + libraryHaskellDepends = [ base ghc ]; + description = "Utilities for writing GHC type-checker plugins"; + license = lib.licenses.bsd2; + hydraPlatforms = lib.platforms.none; + }) {}; + "ghc-time-alloc-prof" = callPackage ({ mkDerivation, attoparsec, base, containers, directory, filepath , process, tasty, tasty-hunit, temporary, text, time @@ -101923,6 +102111,30 @@ self: { license = lib.licenses.bsd2; }) {}; + "ghc-typelits-extra_0_4_3" = callPackage + ({ mkDerivation, base, containers, ghc, ghc-prim + , ghc-tcplugins-extra, ghc-typelits-knownnat + , ghc-typelits-natnormalise, integer-gmp, tasty, tasty-hunit + , transformers + }: + mkDerivation { + pname = "ghc-typelits-extra"; + version = "0.4.3"; + sha256 = "06g40q0n2d10c2zksx5rrjkvm5ywi3rh41hbiwy4zs28x9idsv18"; + libraryHaskellDepends = [ + base containers ghc ghc-prim ghc-tcplugins-extra + ghc-typelits-knownnat ghc-typelits-natnormalise integer-gmp + transformers + ]; + testHaskellDepends = [ + base ghc-typelits-knownnat ghc-typelits-natnormalise tasty + tasty-hunit + ]; + description = "Additional type-level operations on GHC.TypeLits.Nat"; + license = lib.licenses.bsd2; + hydraPlatforms = lib.platforms.none; + }) {}; + "ghc-typelits-knownnat" = callPackage ({ mkDerivation, base, ghc, ghc-prim, ghc-tcplugins-extra , ghc-typelits-natnormalise, tasty, tasty-hunit, tasty-quickcheck @@ -101943,6 +102155,27 @@ self: { license = lib.licenses.bsd2; }) {}; + "ghc-typelits-knownnat_0_7_6" = callPackage + ({ mkDerivation, base, ghc, ghc-prim, ghc-tcplugins-extra + , ghc-typelits-natnormalise, tasty, tasty-hunit, tasty-quickcheck + , template-haskell, transformers + }: + mkDerivation { + pname = "ghc-typelits-knownnat"; + version = "0.7.6"; + sha256 = "10m4y0hf25w2i40464pz85lqs5dr8cznl191icnibc5fjynyzd9v"; + libraryHaskellDepends = [ + base ghc ghc-prim ghc-tcplugins-extra ghc-typelits-natnormalise + template-haskell transformers + ]; + testHaskellDepends = [ + base ghc-typelits-natnormalise tasty tasty-hunit tasty-quickcheck + ]; + description = "Derive KnownNat constraints from other KnownNat constraints"; + license = lib.licenses.bsd2; + hydraPlatforms = lib.platforms.none; + }) {}; + "ghc-typelits-natnormalise" = callPackage ({ mkDerivation, base, containers, ghc, ghc-tcplugins-extra , integer-gmp, tasty, tasty-hunit, template-haskell, transformers @@ -101959,6 +102192,23 @@ self: { license = lib.licenses.bsd2; }) {}; + "ghc-typelits-natnormalise_0_7_6" = callPackage + ({ mkDerivation, base, containers, ghc, ghc-tcplugins-extra + , integer-gmp, tasty, tasty-hunit, template-haskell, transformers + }: + mkDerivation { + pname = "ghc-typelits-natnormalise"; + version = "0.7.6"; + sha256 = "09d70iw58m5g6yi8k2b52f1g0pfdqm5fzhs8rd7fgrgmi70np9bx"; + libraryHaskellDepends = [ + base containers ghc ghc-tcplugins-extra integer-gmp transformers + ]; + testHaskellDepends = [ base tasty tasty-hunit template-haskell ]; + description = "GHC typechecker plugin for types of kind GHC.TypeLits.Nat"; + license = lib.licenses.bsd2; + hydraPlatforms = lib.platforms.none; + }) {}; + "ghc-typelits-presburger" = callPackage ({ mkDerivation, base, containers, equational-reasoning, ghc , ghc-tcplugins-extra, mtl, pretty, reflection, syb, tasty @@ -102229,83 +102479,14 @@ self: { , base16-bytestring, binary, bytestring, bytestring-encoding , case-insensitive, containers, cryptohash-sha1, data-default , deepseq, dependent-map, dependent-sum, Diff, directory, dlist - , extra, filepath, fingertree, fuzzy, ghc, ghc-boot, ghc-boot-th - , ghc-check, ghc-exactprint, ghc-paths, ghc-trace-events - , ghc-typelits-knownnat, gitrev, Glob, haddock-library, hashable - , heapsize, hie-bios, hie-compat, hiedb, hls-plugin-api, hp2pretty - , hslogger, implicit-hie, implicit-hie-cradle, lens, lsp, lsp-test - , lsp-types, mtl, network-uri, opentelemetry, optparse-applicative - , parallel, prettyprinter, prettyprinter-ansi-terminal, process - , QuickCheck, quickcheck-instances, record-dot-preprocessor - , record-hasfield, regex-tdfa, retrie, rope-utf16-splay, safe - , safe-exceptions, shake, shake-bench, sorted-list, sqlite-simple - , stm, syb, tasty, tasty-expected-failure, tasty-hunit - , tasty-quickcheck, tasty-rerun, text, time, transformers, unix - , unliftio, unliftio-core, unordered-containers, utf8-string - , vector, yaml - }: - mkDerivation { - pname = "ghcide"; - version = "1.2.0.2"; - sha256 = "0r3n23i4b51bb92q6pch9knj079a26jbz0q70qfpv66154d00wld"; - revision = "1"; - editedCabalFile = "1hv74yx0x6hh506kwg7ygkajkcczfn3l00f8rc4jnr3hkhkm5v85"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - aeson array async base base16-bytestring binary bytestring - bytestring-encoding case-insensitive containers cryptohash-sha1 - data-default deepseq dependent-map dependent-sum Diff directory - dlist extra filepath fingertree fuzzy ghc ghc-boot ghc-boot-th - ghc-check ghc-exactprint ghc-paths ghc-trace-events Glob - haddock-library hashable heapsize hie-bios hie-compat hiedb - hls-plugin-api hslogger implicit-hie-cradle lens lsp lsp-types mtl - network-uri opentelemetry optparse-applicative parallel - prettyprinter prettyprinter-ansi-terminal regex-tdfa retrie - rope-utf16-splay safe safe-exceptions shake sorted-list - sqlite-simple stm syb text time transformers unix unliftio - unliftio-core unordered-containers utf8-string vector - ]; - executableHaskellDepends = [ - aeson aeson-pretty base bytestring containers data-default - directory extra filepath ghc gitrev hashable heapsize hie-bios - hiedb hls-plugin-api lens lsp lsp-test lsp-types - optparse-applicative process safe-exceptions shake text - unordered-containers - ]; - testHaskellDepends = [ - aeson async base binary bytestring containers data-default - directory extra filepath ghc ghc-typelits-knownnat haddock-library - hls-plugin-api lens lsp lsp-test lsp-types network-uri - optparse-applicative process QuickCheck quickcheck-instances - record-dot-preprocessor record-hasfield regex-tdfa rope-utf16-splay - safe safe-exceptions shake tasty tasty-expected-failure tasty-hunit - tasty-quickcheck tasty-rerun text - ]; - testToolDepends = [ implicit-hie ]; - benchmarkHaskellDepends = [ - aeson base directory extra filepath optparse-applicative shake - shake-bench text yaml - ]; - benchmarkToolDepends = [ hp2pretty implicit-hie ]; - description = "The core of an IDE"; - license = lib.licenses.asl20; - maintainers = with lib.maintainers; [ maralorn ]; - }) {}; - - "ghcide_1_3_0_0" = callPackage - ({ mkDerivation, aeson, aeson-pretty, array, async, base - , base16-bytestring, binary, bytestring, bytestring-encoding - , case-insensitive, containers, cryptohash-sha1, data-default - , deepseq, dependent-map, dependent-sum, Diff, directory, dlist - , extra, filepath, fingertree, fuzzy, ghc, ghc-boot, ghc-boot-th - , ghc-check, ghc-exactprint, ghc-paths, ghc-trace-events - , ghc-typelits-knownnat, gitrev, Glob, haddock-library, hashable - , heapsize, hie-bios, hie-compat, hiedb, hls-graph, hls-plugin-api - , hp2pretty, hslogger, implicit-hie, implicit-hie-cradle, lens, lsp - , lsp-test, lsp-types, mtl, network-uri, opentelemetry - , optparse-applicative, parallel, prettyprinter - , prettyprinter-ansi-terminal, process, QuickCheck + , extra, filepath, fingertree, fuzzy, ghc, ghc-api-compat, ghc-boot + , ghc-boot-th, ghc-check, ghc-exactprint, ghc-paths + , ghc-trace-events, ghc-typelits-knownnat, gitrev, Glob + , haddock-library, hashable, heapsize, hie-bios, hie-compat, hiedb + , hls-graph, hls-plugin-api, hp2pretty, hslogger, implicit-hie + , implicit-hie-cradle, lens, lsp, lsp-test, lsp-types, mtl + , network-uri, opentelemetry, optparse-applicative, parallel + , prettyprinter, prettyprinter-ansi-terminal, process, QuickCheck , quickcheck-instances, record-dot-preprocessor, record-hasfield , regex-tdfa, retrie, rope-utf16-splay, safe, safe-exceptions , shake, shake-bench, sorted-list, sqlite-simple, stm, syb, tasty @@ -102315,17 +102496,17 @@ self: { }: mkDerivation { pname = "ghcide"; - version = "1.3.0.0"; - sha256 = "1rmgrf4is669k5h5hbc9ryp2fc26fcacikzccjyg47jsc967ls9i"; + version = "1.4.0.2"; + sha256 = "1xqvfby6yb734lfiyxmzs17zaz56v7fh9rrfz9p81mdgspsqc739"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ aeson array async base base16-bytestring binary bytestring bytestring-encoding case-insensitive containers cryptohash-sha1 data-default deepseq dependent-map dependent-sum Diff directory - dlist extra filepath fingertree fuzzy ghc ghc-boot ghc-boot-th - ghc-check ghc-exactprint ghc-paths ghc-trace-events Glob - haddock-library hashable heapsize hie-bios hie-compat hiedb + dlist extra filepath fingertree fuzzy ghc ghc-api-compat ghc-boot + ghc-boot-th ghc-check ghc-exactprint ghc-paths ghc-trace-events + Glob haddock-library hashable heapsize hie-bios hie-compat hiedb hls-graph hls-plugin-api hslogger implicit-hie-cradle lens lsp lsp-types mtl network-uri opentelemetry optparse-applicative parallel prettyprinter prettyprinter-ansi-terminal regex-tdfa @@ -102357,7 +102538,6 @@ self: { benchmarkToolDepends = [ hp2pretty implicit-hie ]; description = "The core of an IDE"; license = lib.licenses.asl20; - hydraPlatforms = lib.platforms.none; maintainers = with lib.maintainers; [ maralorn ]; }) {}; @@ -102756,25 +102936,6 @@ self: { }: mkDerivation { pname = "gi-atk"; - version = "2.0.22"; - sha256 = "1jx0wy3a0vzclqpysks3nllvm2163svll1iakh3ar7njba7ihq2x"; - setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ atk ]; - description = "Atk bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) atk;}; - - "gi-atk_2_0_23" = callPackage - ({ mkDerivation, atk, base, bytestring, Cabal, containers, gi-glib - , gi-gobject, haskell-gi, haskell-gi-base, haskell-gi-overloading - , text, transformers - }: - mkDerivation { - pname = "gi-atk"; version = "2.0.23"; sha256 = "05zwlcqx334is27h1v9x89a05srb6zp7mx0viccmij1cqhyfvsmf"; setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; @@ -102785,7 +102946,6 @@ self: { libraryPkgconfigDepends = [ atk ]; description = "Atk bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) atk;}; "gi-cairo" = callPackage @@ -102795,29 +102955,6 @@ self: { }: mkDerivation { pname = "gi-cairo"; - version = "1.0.24"; - sha256 = "1g8dvfhsncigi4xrdydp8bxjrcajk1794xb24wpvqpnnbmmykpwk"; - setupHaskellDepends = [ base Cabal haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers haskell-gi haskell-gi-base - haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ cairo ]; - preCompileBuildDriver = '' - PKG_CONFIG_PATH+=":${cairo}/lib/pkgconfig" - setupCompileFlags+=" $(pkg-config --libs cairo-gobject)" - ''; - description = "Cairo bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) cairo;}; - - "gi-cairo_1_0_25" = callPackage - ({ mkDerivation, base, bytestring, Cabal, cairo, containers - , haskell-gi, haskell-gi-base, haskell-gi-overloading, text - , transformers - }: - mkDerivation { - pname = "gi-cairo"; version = "1.0.25"; sha256 = "0ybf8y8xbjfcaw67l22dfkx0528j5f1if3jm808ccssgdwyy3vc4"; setupHaskellDepends = [ base Cabal haskell-gi ]; @@ -102832,7 +102969,6 @@ self: { ''; description = "Cairo bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) cairo;}; "gi-cairo-again" = callPackage @@ -102890,28 +103026,6 @@ self: { }: mkDerivation { pname = "gi-dbusmenu"; - version = "0.4.8"; - sha256 = "15nvfap39ayw34282br4rch1aias0m1sbapc0nkla8h5ip2naqi6"; - setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ libdbusmenu ]; - description = "Dbusmenu bindings"; - license = lib.licenses.lgpl21Only; - platforms = [ - "aarch64-linux" "armv7l-linux" "i686-linux" "x86_64-linux" - ]; - }) {inherit (pkgs) libdbusmenu;}; - - "gi-dbusmenu_0_4_9" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-glib - , gi-gobject, haskell-gi, haskell-gi-base, haskell-gi-overloading - , libdbusmenu, text, transformers - }: - mkDerivation { - pname = "gi-dbusmenu"; version = "0.4.9"; sha256 = "1n2bxi7cwj32ncalqwid3igk0ssh4pc81z132255216apryszq13"; setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; @@ -102925,7 +103039,6 @@ self: { platforms = [ "aarch64-linux" "armv7l-linux" "i686-linux" "x86_64-linux" ]; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) libdbusmenu;}; "gi-dbusmenugtk3" = callPackage @@ -102936,33 +103049,6 @@ self: { }: mkDerivation { pname = "gi-dbusmenugtk3"; - version = "0.4.9"; - sha256 = "1cni5368ldyblwh0jr6wva8fhi3574d258xzw49prwbjxngmjiv0"; - setupHaskellDepends = [ - base Cabal gi-atk gi-dbusmenu gi-gdk gi-gdkpixbuf gi-glib - gi-gobject gi-gtk haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-atk gi-dbusmenu gi-gdk gi-gdkpixbuf - gi-glib gi-gobject gi-gtk haskell-gi haskell-gi-base - haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ gtk3 libdbusmenu-gtk3 ]; - description = "DbusmenuGtk bindings"; - license = lib.licenses.lgpl21Only; - platforms = [ - "aarch64-linux" "armv7l-linux" "i686-linux" "x86_64-linux" - ]; - }) {inherit (pkgs) gtk3; inherit (pkgs) libdbusmenu-gtk3;}; - - "gi-dbusmenugtk3_0_4_10" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-atk - , gi-dbusmenu, gi-gdk, gi-gdkpixbuf, gi-glib, gi-gobject, gi-gtk - , gtk3, haskell-gi, haskell-gi-base, haskell-gi-overloading - , libdbusmenu-gtk3, text, transformers - }: - mkDerivation { - pname = "gi-dbusmenugtk3"; version = "0.4.10"; sha256 = "1hq7v2lii8n6nn1dhdg42z2d3in8xahkhm6xk4hmfj7abzfghz7z"; setupHaskellDepends = [ @@ -102980,7 +103066,6 @@ self: { platforms = [ "aarch64-linux" "armv7l-linux" "i686-linux" "x86_64-linux" ]; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) gtk3; inherit (pkgs) libdbusmenu-gtk3;}; "gi-gdk" = callPackage @@ -102991,30 +103076,6 @@ self: { }: mkDerivation { pname = "gi-gdk"; - version = "3.0.23"; - sha256 = "18v3kb6kmryymmrz0d88nf25priwyh3yzh7raghc5ph2rv7n4w8m"; - setupHaskellDepends = [ - base Cabal gi-cairo gi-gdkpixbuf gi-gio gi-glib gi-gobject gi-pango - haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-cairo gi-gdkpixbuf gi-gio gi-glib - gi-gobject gi-pango haskell-gi haskell-gi-base - haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ gtk3 ]; - description = "Gdk bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) gtk3;}; - - "gi-gdk_3_0_24" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-cairo - , gi-gdkpixbuf, gi-gio, gi-glib, gi-gobject, gi-pango, gtk3 - , haskell-gi, haskell-gi-base, haskell-gi-overloading, text - , transformers - }: - mkDerivation { - pname = "gi-gdk"; version = "3.0.24"; sha256 = "17slysv7zj3nbzh302w8jkvcfkvwfk5s80n99lqhggd6lnhf5fjx"; setupHaskellDepends = [ @@ -103029,7 +103090,6 @@ self: { libraryPkgconfigDepends = [ gtk3 ]; description = "Gdk bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) gtk3;}; "gi-gdk_4_0_3" = callPackage @@ -103059,27 +103119,6 @@ self: { "gi-gdkpixbuf" = callPackage ({ mkDerivation, base, bytestring, Cabal, containers, gdk-pixbuf - , gi-gio, gi-glib, gi-gobject, haskell-gi, haskell-gi-base - , haskell-gi-overloading, text, transformers - }: - mkDerivation { - pname = "gi-gdkpixbuf"; - version = "2.0.24"; - sha256 = "00hgfyln0pqx4fmffc24mx818y1lladfc288qq0f03345p5dnbna"; - setupHaskellDepends = [ - base Cabal gi-gio gi-glib gi-gobject haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-gio gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ gdk-pixbuf ]; - description = "GdkPixbuf bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) gdk-pixbuf;}; - - "gi-gdkpixbuf_2_0_26" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gdk-pixbuf , gi-gio, gi-glib, gi-gmodule, gi-gobject, haskell-gi , haskell-gi-base, haskell-gi-overloading, text, transformers }: @@ -103097,7 +103136,6 @@ self: { libraryPkgconfigDepends = [ gdk-pixbuf ]; description = "GdkPixbuf bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) gdk-pixbuf;}; "gi-gdkx11" = callPackage @@ -103107,28 +103145,6 @@ self: { }: mkDerivation { pname = "gi-gdkx11"; - version = "3.0.10"; - sha256 = "0kfn4l5jqhllz514zw5cxf7181ybb5c11r680nwhr99b97yy0q9f"; - setupHaskellDepends = [ - base Cabal gi-cairo gi-gdk gi-gio gi-gobject gi-xlib haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-cairo gi-gdk gi-gio gi-gobject - gi-xlib haskell-gi haskell-gi-base haskell-gi-overloading text - transformers - ]; - libraryPkgconfigDepends = [ gtk3 ]; - description = "GdkX11 bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) gtk3;}; - - "gi-gdkx11_3_0_11" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-cairo - , gi-gdk, gi-gio, gi-gobject, gi-xlib, gtk3, haskell-gi - , haskell-gi-base, haskell-gi-overloading, text, transformers - }: - mkDerivation { - pname = "gi-gdkx11"; version = "3.0.11"; sha256 = "07r47fpx6rvsahgnv8g741fl6h1s6y1xrlyacbpc3d8cv7x4aax2"; setupHaskellDepends = [ @@ -103142,7 +103158,6 @@ self: { libraryPkgconfigDepends = [ gtk3 ]; description = "GdkX11 bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) gtk3;}; "gi-gdkx11_4_0_3" = callPackage @@ -103199,25 +103214,6 @@ self: { }: mkDerivation { pname = "gi-gio"; - version = "2.0.27"; - sha256 = "08qc0ahj0qmmibf92m48hv8q2x47q83c6j9a49h11dyc8l4nclx6"; - setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ glib ]; - description = "Gio bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) glib;}; - - "gi-gio_2_0_28" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-glib - , gi-gobject, glib, haskell-gi, haskell-gi-base - , haskell-gi-overloading, text, transformers - }: - mkDerivation { - pname = "gi-gio"; version = "2.0.28"; sha256 = "0bb6ciikk9mf64azbcgnybcjidxwdpjzanarf5ganbb4bb3l5d2h"; setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; @@ -103228,7 +103224,6 @@ self: { libraryPkgconfigDepends = [ glib ]; description = "Gio bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) glib;}; "gi-girepository" = callPackage @@ -103257,25 +103252,6 @@ self: { }: mkDerivation { pname = "gi-glib"; - version = "2.0.24"; - sha256 = "0zrajclbjbq6d6pyvz3s0kjq997w7j8nghi3i89l8fjw16gbmjxn"; - setupHaskellDepends = [ base Cabal haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers haskell-gi haskell-gi-base - haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ glib ]; - description = "GLib bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) glib;}; - - "gi-glib_2_0_25" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, glib - , haskell-gi, haskell-gi-base, haskell-gi-overloading, text - , transformers - }: - mkDerivation { - pname = "gi-glib"; version = "2.0.25"; sha256 = "0xki14pipyl45q6c0bwllkadbnqjm08ik24aw5gcmrvnjzag5gd7"; setupHaskellDepends = [ base Cabal haskell-gi ]; @@ -103286,7 +103262,6 @@ self: { libraryPkgconfigDepends = [ glib ]; description = "GLib bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) glib;}; "gi-gmodule" = callPackage @@ -103315,25 +103290,6 @@ self: { }: mkDerivation { pname = "gi-gobject"; - version = "2.0.25"; - sha256 = "0yz80wcxhy1mm441507qsj2f7380l2iwh4s1miwpd8kb5m147n9w"; - setupHaskellDepends = [ base Cabal gi-glib haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib haskell-gi haskell-gi-base - haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ glib ]; - description = "GObject bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) glib;}; - - "gi-gobject_2_0_26" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-glib, glib - , haskell-gi, haskell-gi-base, haskell-gi-overloading, text - , transformers - }: - mkDerivation { - pname = "gi-gobject"; version = "2.0.26"; sha256 = "1kddnhdpnm21zma1zr9hpb2krrm5ksri85nzh2s9fc9c2c90xkpz"; setupHaskellDepends = [ base Cabal gi-glib haskell-gi ]; @@ -103344,7 +103300,6 @@ self: { libraryPkgconfigDepends = [ glib ]; description = "GObject bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) glib;}; "gi-graphene" = callPackage @@ -103354,27 +103309,6 @@ self: { }: mkDerivation { pname = "gi-graphene"; - version = "1.0.2"; - sha256 = "1mszvx58mdazy8202s0c05hp800b92n21g4rxwvp5k0ms7qz95nq"; - setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ graphene-gobject ]; - description = "Graphene bindings"; - license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; - broken = true; - }) {graphene-gobject = null;}; - - "gi-graphene_1_0_3" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-glib - , gi-gobject, graphene-gobject, haskell-gi, haskell-gi-base - , haskell-gi-overloading, text, transformers - }: - mkDerivation { - pname = "gi-graphene"; version = "1.0.3"; sha256 = "06sh52338kqqbj6251xdz4yn0601nmxzl4z95w6a70dxs66js03c"; setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; @@ -103552,30 +103486,6 @@ self: { }: mkDerivation { pname = "gi-gtk"; - version = "3.0.36"; - sha256 = "0bzb3xrax5k5r5fd6vv4by6hprmk77qrqr9mqn3dxqm6an8jwjn9"; - setupHaskellDepends = [ - base Cabal gi-atk gi-cairo gi-gdk gi-gdkpixbuf gi-gio gi-glib - gi-gobject gi-pango haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-atk gi-cairo gi-gdk gi-gdkpixbuf - gi-gio gi-glib gi-gobject gi-pango haskell-gi haskell-gi-base - haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ gtk3 ]; - description = "Gtk bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) gtk3;}; - - "gi-gtk_3_0_37" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-atk - , gi-cairo, gi-gdk, gi-gdkpixbuf, gi-gio, gi-glib, gi-gobject - , gi-pango, gtk3, haskell-gi, haskell-gi-base - , haskell-gi-overloading, text, transformers - }: - mkDerivation { - pname = "gi-gtk"; version = "3.0.37"; sha256 = "1psg789lrpcnrwh1y80y7s09hcxl3hihi0gwsmd7j3v731dp7a0k"; setupHaskellDepends = [ @@ -103590,7 +103500,6 @@ self: { libraryPkgconfigDepends = [ gtk3 ]; description = "Gtk bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) gtk3;}; "gi-gtk_4_0_4" = callPackage @@ -103670,23 +103579,6 @@ self: { }: mkDerivation { pname = "gi-gtk-hs"; - version = "0.3.9"; - sha256 = "1ql14ripivfh1w65wnr6mw64f2vlwi54gz70c8qql9f5szbnjky1"; - libraryHaskellDepends = [ - base base-compat containers gi-gdk gi-gdkpixbuf gi-glib gi-gobject - gi-gtk haskell-gi-base mtl text transformers - ]; - description = "A wrapper for gi-gtk, adding a few more idiomatic API parts on top"; - license = lib.licenses.lgpl21Only; - }) {}; - - "gi-gtk-hs_0_3_10" = callPackage - ({ mkDerivation, base, base-compat, containers, gi-gdk - , gi-gdkpixbuf, gi-glib, gi-gobject, gi-gtk, haskell-gi-base, mtl - , text, transformers - }: - mkDerivation { - pname = "gi-gtk-hs"; version = "0.3.10"; sha256 = "00vhnkblvvq7qjs65rmfy0q2rs388954p6yd1lga2y79lc2xr6fw"; libraryHaskellDepends = [ @@ -103695,7 +103587,6 @@ self: { ]; description = "A wrapper for gi-gtk, adding a few more idiomatic API parts on top"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {}; "gi-gtkosxapplication" = callPackage @@ -103804,25 +103695,6 @@ self: { }: mkDerivation { pname = "gi-harfbuzz"; - version = "0.0.3"; - sha256 = "1rapwaf8rz18rsai54lq9wcccf9j0ihcafvwhrzvgl17fjqcfqaz"; - setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ harfbuzz harfbuzz-gobject ]; - description = "HarfBuzz bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) harfbuzz; harfbuzz-gobject = null;}; - - "gi-harfbuzz_0_0_4" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-glib - , gi-gobject, harfbuzz, harfbuzz-gobject, haskell-gi - , haskell-gi-base, haskell-gi-overloading, text, transformers - }: - mkDerivation { - pname = "gi-harfbuzz"; version = "0.0.4"; sha256 = "0h3dgz914n55x7rhwayxscfkhhhj7qgw5a7fh0j2fn18c201klwm"; setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; @@ -103833,7 +103705,6 @@ self: { libraryPkgconfigDepends = [ harfbuzz harfbuzz-gobject ]; description = "HarfBuzz bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) harfbuzz; harfbuzz-gobject = null;}; "gi-ibus" = callPackage @@ -103867,25 +103738,6 @@ self: { }: mkDerivation { pname = "gi-javascriptcore"; - version = "4.0.22"; - sha256 = "191ipwjxn94dxz6saapidvjr8bbnl0y3p4f10s6mj6h6pkb5axjb"; - setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ webkitgtk ]; - description = "JavaScriptCore bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) webkitgtk;}; - - "gi-javascriptcore_4_0_23" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-glib - , gi-gobject, haskell-gi, haskell-gi-base, haskell-gi-overloading - , text, transformers, webkitgtk - }: - mkDerivation { - pname = "gi-javascriptcore"; version = "4.0.23"; sha256 = "0r6jmhiq9jij72yz1z6sfjh3dk7g77q07kyvz3ayndqsbn3xrwi7"; setupHaskellDepends = [ base Cabal gi-glib gi-gobject haskell-gi ]; @@ -103896,7 +103748,6 @@ self: { libraryPkgconfigDepends = [ webkitgtk ]; description = "JavaScriptCore bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) webkitgtk;}; "gi-notify" = callPackage @@ -103951,31 +103802,6 @@ self: { }: mkDerivation { pname = "gi-pango"; - version = "1.0.23"; - sha256 = "18pp83nzqdxzq15g3rm0xym4hdq3f851m6mshlb4f7liy168vpl9"; - setupHaskellDepends = [ - base Cabal gi-glib gi-gobject gi-harfbuzz haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-glib gi-gobject gi-harfbuzz - haskell-gi haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ cairo pango ]; - preCompileBuildDriver = '' - PKG_CONFIG_PATH+=":${cairo}/lib/pkgconfig" - setupCompileFlags+=" $(pkg-config --libs cairo-gobject)" - ''; - description = "Pango bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) cairo; inherit (pkgs) pango;}; - - "gi-pango_1_0_24" = callPackage - ({ mkDerivation, base, bytestring, Cabal, cairo, containers - , gi-glib, gi-gobject, gi-harfbuzz, haskell-gi, haskell-gi-base - , haskell-gi-overloading, pango, text, transformers - }: - mkDerivation { - pname = "gi-pango"; version = "1.0.24"; sha256 = "0qvz1r3xc4rz2fvaw1mimwn39xim55zn6zhbkavw2n5jm6xnydkh"; setupHaskellDepends = [ @@ -103992,7 +103818,6 @@ self: { ''; description = "Pango bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) cairo; inherit (pkgs) pango;}; "gi-pangocairo" = callPackage @@ -104070,27 +103895,6 @@ self: { }: mkDerivation { pname = "gi-soup"; - version = "2.4.23"; - sha256 = "109n57ff69xmwhm3lvf0ajid3zl0l9sr1qdnvis06bhcddw9i1ap"; - setupHaskellDepends = [ - base Cabal gi-gio gi-glib gi-gobject haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-gio gi-glib gi-gobject haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ libsoup ]; - description = "Libsoup bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) libsoup;}; - - "gi-soup_2_4_24" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-gio - , gi-glib, gi-gobject, haskell-gi, haskell-gi-base - , haskell-gi-overloading, libsoup, text, transformers - }: - mkDerivation { - pname = "gi-soup"; version = "2.4.24"; sha256 = "148ksnsfadbx3as23c79nmmsrkzfcvncbvvqqmhygwkm9mxsv9sr"; setupHaskellDepends = [ @@ -104103,7 +103907,6 @@ self: { libraryPkgconfigDepends = [ libsoup ]; description = "Libsoup bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) libsoup;}; "gi-vips" = callPackage @@ -104185,30 +103988,6 @@ self: { }: mkDerivation { pname = "gi-webkit2"; - version = "4.0.26"; - sha256 = "0vbsc5zd1m1k47zpq620kzsiyg2g25ag6fvkwj0hdlq24xhyiavr"; - setupHaskellDepends = [ - base Cabal gi-atk gi-cairo gi-gdk gi-gio gi-glib gi-gobject gi-gtk - gi-javascriptcore gi-soup haskell-gi - ]; - libraryHaskellDepends = [ - base bytestring containers gi-atk gi-cairo gi-gdk gi-gio gi-glib - gi-gobject gi-gtk gi-javascriptcore gi-soup haskell-gi - haskell-gi-base haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ webkitgtk ]; - description = "WebKit2 bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) webkitgtk;}; - - "gi-webkit2_4_0_27" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, gi-atk - , gi-cairo, gi-gdk, gi-gio, gi-glib, gi-gobject, gi-gtk - , gi-javascriptcore, gi-soup, haskell-gi, haskell-gi-base - , haskell-gi-overloading, text, transformers, webkitgtk - }: - mkDerivation { - pname = "gi-webkit2"; version = "4.0.27"; sha256 = "05ka1i4afd9j5kyyd1z9xxv9vmbmq2wziir3pln9a692zga0f2h1"; setupHaskellDepends = [ @@ -104223,7 +104002,6 @@ self: { libraryPkgconfigDepends = [ webkitgtk ]; description = "WebKit2 bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) webkitgtk;}; "gi-webkit2webextension" = callPackage @@ -104282,25 +104060,6 @@ self: { }: mkDerivation { pname = "gi-xlib"; - version = "2.0.9"; - sha256 = "02n2iz30dkkfqpsc3ngpx0zxrl6fbsafzrjf0im8an783jp3vm80"; - setupHaskellDepends = [ base Cabal haskell-gi ]; - libraryHaskellDepends = [ - base bytestring containers haskell-gi haskell-gi-base - haskell-gi-overloading text transformers - ]; - libraryPkgconfigDepends = [ xlibsWrapper ]; - description = "xlib bindings"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) xlibsWrapper;}; - - "gi-xlib_2_0_10" = callPackage - ({ mkDerivation, base, bytestring, Cabal, containers, haskell-gi - , haskell-gi-base, haskell-gi-overloading, text, transformers - , xlibsWrapper - }: - mkDerivation { - pname = "gi-xlib"; version = "2.0.10"; sha256 = "1h6kpg0mm16b5rz7ixi5qj8y0is96cwkkpgwcl8m8ycjscsgfj88"; setupHaskellDepends = [ base Cabal haskell-gi ]; @@ -104311,7 +104070,6 @@ self: { libraryPkgconfigDepends = [ xlibsWrapper ]; description = "xlib bindings"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) xlibsWrapper;}; "giak" = callPackage @@ -104378,6 +104136,39 @@ self: { license = lib.licenses.mit; }) {}; + "ginger_0_10_2_0" = callPackage + ({ mkDerivation, aeson, aeson-pretty, base, bytestring, containers + , data-default, filepath, http-types, mtl, optparse-applicative + , parsec, process, regex-tdfa, safe, scientific, tasty, tasty-hunit + , tasty-quickcheck, text, time, transformers, unordered-containers + , utf8-string, vector, yaml + }: + mkDerivation { + pname = "ginger"; + version = "0.10.2.0"; + sha256 = "0mqwcd4l8h6gk2i1qgj99zlp0c46kvkzni14vl2k6m3iili12ir7"; + isLibrary = true; + isExecutable = true; + enableSeparateDataOutput = true; + libraryHaskellDepends = [ + aeson aeson-pretty base bytestring containers data-default filepath + http-types mtl parsec regex-tdfa safe scientific text time + transformers unordered-containers utf8-string vector + ]; + executableHaskellDepends = [ + aeson base bytestring data-default optparse-applicative process + text transformers unordered-containers utf8-string yaml + ]; + testHaskellDepends = [ + aeson base bytestring data-default mtl tasty tasty-hunit + tasty-quickcheck text time transformers unordered-containers + utf8-string + ]; + description = "An implementation of the Jinja2 template language in Haskell"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "gingersnap" = callPackage ({ mkDerivation, aeson, base, bytestring, containers, deepseq , http-types, microspec, postgresql-simple, resource-pool @@ -104582,8 +104373,8 @@ self: { }: mkDerivation { pname = "git-annex"; - version = "8.20210428"; - sha256 = "0xpvhpnl600874sa392wjfd2yd9s6ps2cq2qfkzyxxf90p9fcwg8"; + version = "8.20210621"; + sha256 = "01i8mgxz4ca0c50g2w2qgr3m04l5zsw17r0cadn3kwyld662r98n"; configureFlags = [ "-fassistant" "-f-benchmark" "-fdbus" "-f-debuglocks" "-fmagicmime" "-fnetworkbsd" "-fpairing" "-fproduction" "-fs3" "-ftorrentparser" @@ -106286,6 +106077,7 @@ self: { ]; description = "Extras to interface Gloss and Accelerate"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; }) {}; "gloss-algorithms" = callPackage @@ -109479,8 +109271,8 @@ self: { }: mkDerivation { pname = "google-maps-geocoding"; - version = "0.5.0.1"; - sha256 = "0cc7hhw4bqls6bckpahck5ad2pv6fzw2qkp8iym7y4cylsxvnamq"; + version = "0.7.0.0"; + sha256 = "0p6b2xyfkw073anhwwk4sdpphj3j1h24k277yc131yvyjlw4kslx"; libraryHaskellDepends = [ aeson base google-static-maps http-client servant servant-client text @@ -114623,28 +114415,6 @@ self: { }: mkDerivation { pname = "haddock-library"; - version = "1.9.0"; - sha256 = "0c37mhmvr4saw5m4snyj1nij786dwmk9kch7hafgd1xswb9k4c5c"; - libraryHaskellDepends = [ - base bytestring containers parsec text transformers - ]; - testHaskellDepends = [ - base base-compat bytestring containers deepseq directory filepath - hspec optparse-applicative parsec QuickCheck text transformers - tree-diff - ]; - testToolDepends = [ hspec-discover ]; - description = "Library exposing some functionality of Haddock"; - license = lib.licenses.bsd2; - }) {}; - - "haddock-library_1_10_0" = callPackage - ({ mkDerivation, base, base-compat, bytestring, containers, deepseq - , directory, filepath, hspec, hspec-discover, optparse-applicative - , parsec, QuickCheck, text, transformers, tree-diff - }: - mkDerivation { - pname = "haddock-library"; version = "1.10.0"; sha256 = "15ak06q8yp11xz1hwr0sg2jqi3r78p1n89ik05hicqvxl3awf1pq"; libraryHaskellDepends = [ @@ -114658,7 +114428,6 @@ self: { testToolDepends = [ hspec-discover ]; description = "Library exposing some functionality of Haddock"; license = lib.licenses.bsd2; - hydraPlatforms = lib.platforms.none; }) {}; "haddock-test" = callPackage @@ -114710,8 +114479,8 @@ self: { }: mkDerivation { pname = "hadolint"; - version = "2.4.1"; - sha256 = "166jpi6bzq2j6ss652225byn6pdz8ya71fxdndlmqgsram2hrlyn"; + version = "2.5.0"; + sha256 = "0snh5sp47xqncsb19jp29kc2mjln6gpbhwxmvsqy0z9wgch0ldgb"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -115924,6 +115693,8 @@ self: { pname = "halves"; version = "0.1.0.1"; sha256 = "0mjxi7aq58k5aydslsihp66kabh0mr5wp2nngbzkvzbs0z7rrwma"; + revision = "1"; + editedCabalFile = "1llsh3c5as0vby17mdwypgyzlvp2icmxqj52686zi6bfcs2b4p26"; libraryHaskellDepends = [ base lens ]; testHaskellDepends = [ base hedgehog lens ]; description = "Split or combine data structures to and from halves, quarters, eighths"; @@ -116438,38 +116209,6 @@ self: { }: mkDerivation { pname = "hapistrano"; - version = "0.4.1.4"; - sha256 = "1ci2q3vkjw51k5hbswmcajk7gl1zpmwx3npbkf3kng3j1kcv0bzw"; - isLibrary = true; - isExecutable = true; - enableSeparateDataOutput = true; - libraryHaskellDepends = [ - aeson ansi-terminal base filepath gitrev mtl path process stm time - transformers typed-process yaml - ]; - executableHaskellDepends = [ - aeson async base formatting gitrev optparse-applicative path - path-io stm yaml - ]; - testHaskellDepends = [ - base directory filepath hspec mtl path path-io process QuickCheck - silently temporary yaml - ]; - testToolDepends = [ hspec-discover ]; - description = "A deployment library for Haskell applications"; - license = lib.licenses.mit; - hydraPlatforms = lib.platforms.none; - broken = true; - }) {}; - - "hapistrano_0_4_2_0" = callPackage - ({ mkDerivation, aeson, ansi-terminal, async, base, directory - , filepath, formatting, gitrev, hspec, hspec-discover, mtl - , optparse-applicative, path, path-io, process, QuickCheck - , silently, stm, temporary, time, transformers, typed-process, yaml - }: - mkDerivation { - pname = "hapistrano"; version = "0.4.2.0"; sha256 = "1f23a0n2pjhacqm275k8njkln3an2x0w48kjgxlrna39mf3fdkwh"; isLibrary = true; @@ -117079,6 +116818,35 @@ self: { license = lib.licenses.bsd3; }) {}; + "happstack-server_7_7_1_1" = callPackage + ({ mkDerivation, base, base64-bytestring, blaze-html, bytestring + , containers, directory, exceptions, extensible-exceptions + , filepath, hslogger, html, HUnit, monad-control, mtl, network + , network-uri, old-locale, parsec, process, semigroups, sendfile + , syb, system-filepath, text, threads, time, transformers + , transformers-base, transformers-compat, unix, utf8-string, xhtml + , zlib + }: + mkDerivation { + pname = "happstack-server"; + version = "7.7.1.1"; + sha256 = "0nc5rnvrzl9m3pinmdq234m80qkf4jszbdqnd567f7lh09yiqw9n"; + libraryHaskellDepends = [ + base base64-bytestring blaze-html bytestring containers directory + exceptions extensible-exceptions filepath hslogger html + monad-control mtl network network-uri old-locale parsec process + semigroups sendfile syb system-filepath text threads time + transformers transformers-base transformers-compat unix utf8-string + xhtml zlib + ]; + testHaskellDepends = [ + base bytestring containers HUnit parsec zlib + ]; + description = "Web related tools and services"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "happstack-server-tls" = callPackage ({ mkDerivation, base, bytestring, extensible-exceptions , happstack-server, hslogger, HsOpenSSL, network, openssl, sendfile @@ -117435,8 +117203,8 @@ self: { }: mkDerivation { pname = "hardware-edsl"; - version = "0.1.5"; - sha256 = "112sw9z89s27fi2jmg3a61gsm3far5vd21f1vi9cx2awgfzpi3iw"; + version = "0.1.6"; + sha256 = "1n3wdzv1ag1svsnx83fcp7mk4rhs16c8gppxdc5imnknbx9kg26r"; libraryHaskellDepends = [ array base bytestring constraints containers deepseq language-vhdl mtl operational-alacarte pretty syntactic @@ -119062,28 +118830,6 @@ self: { }: mkDerivation { pname = "haskell-gi"; - version = "0.24.7"; - sha256 = "10xp6z6whfx3iad09l83mcszzj99cc9wcnvk593ypx6zhjv0r555"; - setupHaskellDepends = [ base Cabal cabal-doctest ]; - libraryHaskellDepends = [ - ansi-terminal attoparsec base bytestring Cabal containers directory - filepath haskell-gi-base mtl pretty-show process regex-tdfa safe - text transformers xdg-basedir xml-conduit - ]; - libraryPkgconfigDepends = [ glib gobject-introspection ]; - testHaskellDepends = [ base doctest process ]; - description = "Generate Haskell bindings for GObject Introspection capable libraries"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) glib; inherit (pkgs) gobject-introspection;}; - - "haskell-gi_0_25_0" = callPackage - ({ mkDerivation, ansi-terminal, attoparsec, base, bytestring, Cabal - , cabal-doctest, containers, directory, doctest, filepath, glib - , gobject-introspection, haskell-gi-base, mtl, pretty-show, process - , regex-tdfa, safe, text, transformers, xdg-basedir, xml-conduit - }: - mkDerivation { - pname = "haskell-gi"; version = "0.25.0"; sha256 = "1bxybi1bj9jwfmyj57cb3471s0wczlp6m1qz893kbz17k96mpin8"; setupHaskellDepends = [ base Cabal cabal-doctest ]; @@ -119096,32 +118842,18 @@ self: { testHaskellDepends = [ base doctest process ]; description = "Generate Haskell bindings for GObject Introspection capable libraries"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) glib; inherit (pkgs) gobject-introspection;}; "haskell-gi-base" = callPackage ({ mkDerivation, base, bytestring, containers, glib, text }: mkDerivation { pname = "haskell-gi-base"; - version = "0.24.5"; - sha256 = "0fd5bsf2bnjaq9j8zs9l5837z9x2iryivs57y96c7fx6vxxb9xai"; - libraryHaskellDepends = [ base bytestring containers text ]; - libraryPkgconfigDepends = [ glib ]; - description = "Foundation for libraries generated by haskell-gi"; - license = lib.licenses.lgpl21Only; - }) {inherit (pkgs) glib;}; - - "haskell-gi-base_0_25_0" = callPackage - ({ mkDerivation, base, bytestring, containers, glib, text }: - mkDerivation { - pname = "haskell-gi-base"; version = "0.25.0"; sha256 = "140f6amq69r39vj54i1p4c9q0ysxkvb3yjcrlbrrayf66bhw8mqy"; libraryHaskellDepends = [ base bytestring containers text ]; libraryPkgconfigDepends = [ glib ]; description = "Foundation for libraries generated by haskell-gi"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {inherit (pkgs) glib;}; "haskell-gi-overloading" = callPackage @@ -119264,41 +118996,45 @@ self: { ({ mkDerivation, aeson, aeson-pretty, async, base , base16-bytestring, binary, bytestring, containers , cryptohash-sha1, data-default, deepseq, directory, extra - , filepath, floskell, fourmolu, fuzzy, ghc, ghc-boot-th, ghc-paths - , ghcide, gitrev, hashable, hie-bios, hiedb, hls-brittany-plugin + , filepath, ghc, ghc-api-compat, ghc-boot-th, ghc-paths, ghcide + , gitrev, hashable, hie-bios, hiedb, hls-brittany-plugin , hls-class-plugin, hls-eval-plugin, hls-explicit-imports-plugin - , hls-haddock-comments-plugin, hls-hlint-plugin, hls-plugin-api - , hls-retrie-plugin, hls-splice-plugin, hls-stylish-haskell-plugin - , hls-tactics-plugin, hls-test-utils, hslogger, hspec-expectations - , lens, lsp, lsp-test, lsp-types, mtl, optparse-applicative - , optparse-simple, ormolu, process, regex-tdfa, safe-exceptions - , shake, sqlite-simple, temporary, text, transformers - , unordered-containers + , hls-floskell-plugin, hls-fourmolu-plugin, hls-graph + , hls-haddock-comments-plugin, hls-hlint-plugin + , hls-module-name-plugin, hls-ormolu-plugin, hls-plugin-api + , hls-pragmas-plugin, hls-refine-imports-plugin, hls-retrie-plugin + , hls-splice-plugin, hls-stylish-haskell-plugin, hls-tactics-plugin + , hls-test-utils, hslogger, hspec-expectations, lens, lsp, lsp-test + , lsp-types, mtl, optparse-applicative, optparse-simple, process + , regex-tdfa, safe-exceptions, sqlite-simple, temporary, text + , transformers, unordered-containers }: mkDerivation { pname = "haskell-language-server"; - version = "1.1.0.0"; - sha256 = "0zbr8qr097mjcsbgdkm6a8ala1ifdajmllr8basvrndn28zgi5cg"; + version = "1.2.0.0"; + sha256 = "131l21r9ahnw54x5453j7pw728z6vp3gc2zmj6wrwzz51b9v64q8"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ aeson-pretty async base base16-bytestring bytestring containers cryptohash-sha1 data-default directory extra filepath ghc ghcide - gitrev hie-bios hiedb hls-plugin-api hslogger lsp - optparse-applicative optparse-simple process safe-exceptions shake + gitrev hie-bios hiedb hls-graph hls-plugin-api hslogger lsp + optparse-applicative optparse-simple process safe-exceptions sqlite-simple text unordered-containers ]; executableHaskellDepends = [ aeson async base base16-bytestring binary bytestring containers - cryptohash-sha1 data-default deepseq directory extra filepath - floskell fourmolu fuzzy ghc ghc-boot-th ghc-paths ghcide gitrev - hashable hie-bios hiedb hls-brittany-plugin hls-class-plugin - hls-eval-plugin hls-explicit-imports-plugin - hls-haddock-comments-plugin hls-hlint-plugin hls-plugin-api - hls-retrie-plugin hls-splice-plugin hls-stylish-haskell-plugin - hls-tactics-plugin hslogger lens lsp mtl optparse-applicative - optparse-simple ormolu process regex-tdfa safe-exceptions shake - sqlite-simple temporary text transformers unordered-containers + cryptohash-sha1 data-default deepseq directory extra filepath ghc + ghc-api-compat ghc-boot-th ghc-paths ghcide gitrev hashable + hie-bios hiedb hls-brittany-plugin hls-class-plugin hls-eval-plugin + hls-explicit-imports-plugin hls-floskell-plugin hls-fourmolu-plugin + hls-graph hls-haddock-comments-plugin hls-hlint-plugin + hls-module-name-plugin hls-ormolu-plugin hls-plugin-api + hls-pragmas-plugin hls-refine-imports-plugin hls-retrie-plugin + hls-splice-plugin hls-stylish-haskell-plugin hls-tactics-plugin + hslogger lens lsp mtl optparse-applicative optparse-simple process + regex-tdfa safe-exceptions sqlite-simple temporary text + transformers unordered-containers ]; testHaskellDepends = [ aeson base bytestring containers data-default directory extra @@ -122712,7 +122448,6 @@ self: { ]; description = "A PostgreSQL backed queue"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "hasql-simple" = callPackage @@ -125326,6 +125061,28 @@ self: { license = lib.licenses.bsd3; }) {}; + "hedn_0_3_0_3" = callPackage + ({ mkDerivation, base, containers, deepseq, deriving-compat + , hedgehog, megaparsec, parser-combinators, prettyprinter + , scientific, template-haskell, text, time, uuid-types, vector + }: + mkDerivation { + pname = "hedn"; + version = "0.3.0.3"; + sha256 = "0amfsmnly9yxzv1j34ya8kq9fqd067kgklx7rswy5g7aflj3bpwl"; + libraryHaskellDepends = [ + base containers deepseq deriving-compat megaparsec + parser-combinators prettyprinter scientific template-haskell text + time uuid-types vector + ]; + testHaskellDepends = [ + base containers hedgehog megaparsec text time uuid-types vector + ]; + description = "EDN parsing and encoding"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "hedn-functor" = callPackage ({ mkDerivation, base, containers, hedn, recursion-schemes, text , vector @@ -125362,21 +125119,18 @@ self: { "heidi" = callPackage ({ mkDerivation, base, boxes, containers, criterion, exceptions - , generic-trie, generics-sop, hashable, microlens, microlens-th - , scientific, tasty, tasty-hspec, text, unordered-containers - , vector, weigh + , generics-sop, hashable, microlens, microlens-th, scientific + , tasty, tasty-hspec, text, unordered-containers, vector, weigh }: mkDerivation { pname = "heidi"; - version = "0.1.0"; - sha256 = "1l4am8pqk3xrmjmjv48jia60d2vydpj2wy0iyxqiidnc7b8p5j8m"; - revision = "1"; - editedCabalFile = "0fbx6hkxdbrhh30j2bs3zrxknrlr6z29r7srxnpsgd4n0rkdajar"; + version = "0.3.0"; + sha256 = "196v4y8ff64ivx2p1i9vxxgrpq67j0xyq1hpz5v47yq6k0fdm52n"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ - base boxes containers exceptions generic-trie generics-sop hashable - microlens microlens-th scientific text unordered-containers vector + base boxes containers exceptions generics-sop hashable microlens + microlens-th scientific text unordered-containers vector ]; executableHaskellDepends = [ base exceptions hashable text unordered-containers @@ -125385,7 +125139,6 @@ self: { benchmarkHaskellDepends = [ base criterion weigh ]; description = "Tidy data in Haskell"; license = lib.licenses.mit; - hydraPlatforms = lib.platforms.none; }) {}; "hein" = callPackage @@ -125921,8 +125674,8 @@ self: { }: mkDerivation { pname = "hercules-ci-agent"; - version = "0.8.1"; - sha256 = "0f18mz2chwipjac7dc918hn54frrxqk6bvyjvzqq25agi5zh8h12"; + version = "0.8.2"; + sha256 = "0zz0s9xpi5gdma1ljfbspfysn8vw05859k159nx8lxqbivpf6bxn"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -125955,7 +125708,7 @@ self: { conduit containers exceptions filepath hercules-ci-api-agent hercules-ci-api-core hercules-ci-cnix-store hspec katip lifted-async lifted-base monad-control process protolude - safe-exceptions text transformers-base unliftio-core + safe-exceptions temporary text transformers-base unliftio-core ]; description = "Runs Continuous Integration tasks on your machines"; license = lib.licenses.asl20; @@ -125971,8 +125724,8 @@ self: { }: mkDerivation { pname = "hercules-ci-api"; - version = "0.6.0.1"; - sha256 = "1c9dvj9vv4rm0ndmgfm9s4qfpjbs2ly98r06bl0xv550anik7kqj"; + version = "0.7.0.0"; + sha256 = "0c8mhmhz89fw0s65a669cpcldqv0g01z9s2343ksv2ykaqz5whi9"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -126003,8 +125756,8 @@ self: { }: mkDerivation { pname = "hercules-ci-api-agent"; - version = "0.3.1.0"; - sha256 = "0p1xlzwhaz6ycjzmadnlmr7fvz9iar9b7qzz867xxvix6p8w2nj6"; + version = "0.4.0.0"; + sha256 = "05jdxlr5afr9chayc6frbi9hhagb9qknfdnd2k25cimd7h2syi7r"; libraryHaskellDepends = [ aeson base base64-bytestring-type bytestring containers cookie deepseq exceptions hashable hercules-ci-api-core http-api-data @@ -126031,8 +125784,8 @@ self: { }: mkDerivation { pname = "hercules-ci-api-core"; - version = "0.1.2.0"; - sha256 = "1p2vv5dviac73qi42x7kf09wgc3qjdkpldn7yj5vhmxhcnj7yj6x"; + version = "0.1.3.0"; + sha256 = "1xs5als5fw0fj76rgmygndpw1vfs9bj4lyr8hfgkv4vfbdrmkj2y"; libraryHaskellDepends = [ aeson base bytestring containers cookie deepseq exceptions hashable http-api-data http-media katip lens lifted-base memory @@ -126059,8 +125812,8 @@ self: { }: mkDerivation { pname = "hercules-ci-cli"; - version = "0.2.0"; - sha256 = "0fxsx31b6m9hxcpymixmfpvj1k569kzbxd2jvm8kzda073hljsbm"; + version = "0.2.1"; + sha256 = "1lbvc2n1mjrnvnpnqvgjd1zbsa96zdpvjhbawfd8rw63ih8l451z"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -126089,15 +125842,16 @@ self: { "hercules-ci-cnix-expr" = callPackage ({ mkDerivation, aeson, base, bdw-gc, boost, bytestring, conduit , containers, exceptions, hercules-ci-cnix-store, inline-c - , inline-c-cpp, nix, protolude, text + , inline-c-cpp, nix, protolude, text, unliftio }: mkDerivation { pname = "hercules-ci-cnix-expr"; - version = "0.1.0.0"; - sha256 = "1f9pq6z5xvmq7hd136dshazybazydsmah5f5h8w82yi12ccyqlaz"; + version = "0.2.0.0"; + sha256 = "1z76ckxb629lbwa96axigan8xax6wd9w8p37isyisqwvk1a1gsc7"; libraryHaskellDepends = [ aeson base bytestring conduit containers exceptions hercules-ci-cnix-store inline-c inline-c-cpp protolude text + unliftio ]; librarySystemDepends = [ boost ]; libraryPkgconfigDepends = [ bdw-gc nix ]; @@ -126108,18 +125862,25 @@ self: { "hercules-ci-cnix-store" = callPackage ({ mkDerivation, base, boost, bytestring, conduit, containers - , inline-c, inline-c-cpp, nix, protolude, unliftio-core + , exceptions, hspec, hspec-discover, inline-c, inline-c-cpp, nix + , protolude, template-haskell, temporary, text, unliftio-core + , vector }: mkDerivation { pname = "hercules-ci-cnix-store"; - version = "0.1.1.0"; - sha256 = "1lvlilhfkyx3i4fp0azjx4gm2iwm6hkjrg6kc5faifw7knfivinj"; + version = "0.2.0.1"; + sha256 = "1vd7wy23glgxs823c8c1754miwpmrfscsfdn74nyx31gci4jhqgx"; libraryHaskellDepends = [ base bytestring conduit containers inline-c inline-c-cpp protolude - unliftio-core + template-haskell unliftio-core vector ]; librarySystemDepends = [ boost ]; libraryPkgconfigDepends = [ nix ]; + testHaskellDepends = [ + base bytestring containers exceptions hspec inline-c inline-c-cpp + protolude temporary text + ]; + testToolDepends = [ hspec-discover ]; description = "Haskell bindings for Nix's libstore"; license = lib.licenses.asl20; maintainers = with lib.maintainers; [ roberth ]; @@ -126157,8 +125918,8 @@ self: { }: mkDerivation { pname = "heredocs"; - version = "0.2.1.0"; - sha256 = "0wjj5sy4mpd4ahavdmi67j70xs1wrga8dnzr5jv8cjnqjj2p8f59"; + version = "0.2.1.1"; + sha256 = "10vxd4f77vj2q79nri2zvjrgp1h8q058zp4xanh18pwpwqz8pbv6"; libraryHaskellDepends = [ base bytestring doctest parsec template-haskell text ]; @@ -127685,6 +127446,8 @@ self: { ]; description = "Happy Haskell Programming"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "hhwloc" = callPackage @@ -127928,8 +127691,8 @@ self: { }: mkDerivation { pname = "hie-compat"; - version = "0.1.0.0"; - sha256 = "00wnb7ylahglw167n2n1b2a6b0b75ay167zzrl10jsskivxwx3h3"; + version = "0.2.0.0"; + sha256 = "029h465wfknjdjk4yqq10b9krya9qplh8zzvmnwp9hf5rlr9awc3"; libraryHaskellDepends = [ array base bytestring containers directory filepath ghc ghc-boot transformers @@ -130115,6 +129878,8 @@ self: { pname = "hledger-web"; version = "1.21"; sha256 = "0ivszqcypw0j2wn4r7fv7dqm1pvr0b1y6rqpxagzyk8cxn3ic9g2"; + revision = "1"; + editedCabalFile = "1hnw10ibhbafbsfj5lzlxwjg4cjnqr5bb51n6mqbi30qqabgq78x"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -130224,7 +129989,7 @@ self: { license = lib.licenses.mit; }) {inherit (pkgs) libsass;}; - "hlint_3_2_7" = callPackage + "hlint" = callPackage ({ mkDerivation, aeson, ansi-terminal, base, bytestring, cmdargs , containers, cpphs, data-default, directory, extra, file-embed , filepath, filepattern, ghc, ghc-boot, ghc-boot-th @@ -130247,11 +130012,10 @@ self: { executableHaskellDepends = [ base ]; description = "Source code suggestions"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; maintainers = with lib.maintainers; [ maralorn ]; }) {}; - "hlint" = callPackage + "hlint_3_3_1" = callPackage ({ mkDerivation, aeson, ansi-terminal, base, bytestring, cmdargs , containers, cpphs, data-default, directory, extra, file-embed , filepath, filepattern, ghc-lib-parser, ghc-lib-parser-ex @@ -130274,6 +130038,7 @@ self: { executableHaskellDepends = [ base ]; description = "Source code suggestions"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; maintainers = with lib.maintainers; [ maralorn ]; }) {}; @@ -130418,6 +130183,8 @@ self: { pname = "hls-brittany-plugin"; version = "1.0.0.1"; sha256 = "1lfhgvxs0bvs67raxalvj8pr4qln1yvi7i7wlp33gpk2x89bwaqy"; + revision = "3"; + editedCabalFile = "0d7pn634gpksl49hp3bfds52zhc80943bb2l5cvlbaf3phlsfskc"; libraryHaskellDepends = [ base brittany filepath ghc ghc-boot-th ghcide hls-plugin-api lens lsp-types text transformers @@ -130428,22 +130195,20 @@ self: { }) {}; "hls-class-plugin" = callPackage - ({ mkDerivation, aeson, base, bytestring, containers, filepath, ghc - , ghc-exactprint, ghcide, hls-plugin-api, hls-test-utils, lens, lsp - , lsp-test, lsp-types, shake, text, transformers - , unordered-containers + ({ mkDerivation, aeson, base, containers, filepath, ghc + , ghc-api-compat, ghc-exactprint, ghcide, hls-plugin-api + , hls-test-utils, lens, lsp, lsp-types, text, transformers }: mkDerivation { pname = "hls-class-plugin"; - version = "1.0.0.1"; - sha256 = "0s9pkdcgvfb9qhj9qjy6bygdyshanczcn9apq3qcw8yznl1zqilc"; + version = "1.0.0.2"; + sha256 = "0z6774vmfafgr3z5h98ls5sssax15psa2dq5sf8bcqm29y3g3zvi"; libraryHaskellDepends = [ - aeson base containers ghc ghc-exactprint ghcide hls-plugin-api lens - lsp shake text transformers unordered-containers + aeson base containers ghc ghc-api-compat ghc-exactprint ghcide + hls-plugin-api lens lsp text transformers ]; testHaskellDepends = [ - base bytestring filepath hls-test-utils lens lsp-test lsp-types - text + base filepath hls-test-utils lens lsp-types ]; description = "Class/instance management plugin for Haskell Language Server"; license = lib.licenses.asl20; @@ -130451,26 +130216,25 @@ self: { "hls-eval-plugin" = callPackage ({ mkDerivation, aeson, base, containers, deepseq, Diff, directory - , dlist, extra, filepath, ghc, ghc-boot-th, ghc-paths, ghcide - , hashable, hls-plugin-api, hls-test-utils, lens, lsp, lsp-test - , lsp-types, megaparsec, mtl, parser-combinators, pretty-simple - , QuickCheck, safe-exceptions, shake, temporary, text, time + , dlist, extra, filepath, ghc, ghc-api-compat, ghc-boot-th + , ghc-paths, ghcide, hashable, hls-plugin-api, hls-test-utils, lens + , lsp, lsp-types, megaparsec, mtl, parser-combinators + , pretty-simple, QuickCheck, safe-exceptions, temporary, text, time , transformers, unliftio, unordered-containers }: mkDerivation { pname = "hls-eval-plugin"; - version = "1.1.0.0"; - sha256 = "138l49a8y0g7yk29xdjs0jv0xmz3y8lvig45g944spj3xi8snpfx"; + version = "1.1.1.0"; + sha256 = "167vmz7jl09lkayjf6g0inn2q5i1h3gs5vl6xpdg4cbvd8srdvbs"; libraryHaskellDepends = [ aeson base containers deepseq Diff directory dlist extra filepath - ghc ghc-boot-th ghc-paths ghcide hashable hls-plugin-api lens lsp - lsp-types megaparsec mtl parser-combinators pretty-simple - QuickCheck safe-exceptions shake temporary text time transformers - unliftio unordered-containers + ghc ghc-api-compat ghc-boot-th ghc-paths ghcide hashable + hls-plugin-api lens lsp lsp-types megaparsec mtl parser-combinators + pretty-simple QuickCheck safe-exceptions temporary text time + transformers unliftio unordered-containers ]; testHaskellDepends = [ - aeson base directory extra filepath hls-test-utils lens lsp-test - lsp-types text + aeson base directory extra filepath hls-test-utils lens lsp-types ]; description = "Eval plugin for Haskell Language Server"; license = lib.licenses.asl20; @@ -130496,37 +130260,20 @@ self: { }) {}; "hls-explicit-imports-plugin" = callPackage - ({ mkDerivation, aeson, base, containers, deepseq, ghc, ghcide - , hls-plugin-api, lsp, lsp-types, shake, text, unordered-containers - }: - mkDerivation { - pname = "hls-explicit-imports-plugin"; - version = "1.0.0.1"; - sha256 = "1ygs667pkc3zn66yqz6ssrxifhrc906sddmcgjnkprk7zappk2nc"; - libraryHaskellDepends = [ - aeson base containers deepseq ghc ghcide hls-plugin-api lsp - lsp-types shake text unordered-containers - ]; - description = "Explicit imports plugin for Haskell Language Server"; - license = lib.licenses.asl20; - }) {}; - - "hls-explicit-imports-plugin_1_0_0_2" = callPackage - ({ mkDerivation, aeson, base, containers, deepseq, ghc, ghcide - , hls-graph, hls-plugin-api, lsp, lsp-types, text + ({ mkDerivation, aeson, base, containers, deepseq, ghc + , ghc-api-compat, ghcide, hls-graph, hls-plugin-api, lsp, text , unordered-containers }: mkDerivation { pname = "hls-explicit-imports-plugin"; - version = "1.0.0.2"; - sha256 = "1ga7phiy7i6kmin0zi0dykbkv29vh46hzrn0bkvfqjkrb41mbi8q"; + version = "1.0.0.3"; + sha256 = "0sh4mimx76n6nzlz0nxa1z5q9ga8g268lkncqz4p0nbc54y070hh"; libraryHaskellDepends = [ - aeson base containers deepseq ghc ghcide hls-graph hls-plugin-api - lsp lsp-types text unordered-containers + aeson base containers deepseq ghc ghc-api-compat ghcide hls-graph + hls-plugin-api lsp text unordered-containers ]; description = "Explicit imports plugin for Haskell Language Server"; license = lib.licenses.asl20; - hydraPlatforms = lib.platforms.none; }) {}; "hls-floskell-plugin" = callPackage @@ -130537,47 +130284,39 @@ self: { pname = "hls-floskell-plugin"; version = "1.0.0.0"; sha256 = "0wf4483a4xhvynqqgj6gf1qg5nv9rv4gv9rm2hwsbjq123bs0wy8"; + revision = "1"; + editedCabalFile = "120ai8hswj310sv098j1b8dzpkzmjyphyxqnc1gszqds3qx588fj"; libraryHaskellDepends = [ base floskell ghcide hls-plugin-api lsp-types text transformers ]; testHaskellDepends = [ base hls-test-utils text ]; description = "Integration with the Floskell code formatter"; license = lib.licenses.asl20; - hydraPlatforms = lib.platforms.none; - broken = true; }) {}; "hls-fourmolu-plugin" = callPackage - ({ mkDerivation, aeson, base, bytestring, containers, data-default - , extra, filepath, fourmolu, ghc, ghc-boot-th, ghcide - , hls-plugin-api, hls-test-utils, hspec-expectations, lens, lsp - , lsp-test, lsp-types, text, unordered-containers + ({ mkDerivation, base, filepath, fourmolu, ghc, ghc-boot-th, ghcide + , hls-plugin-api, hls-test-utils, lens, lsp, lsp-test, text }: mkDerivation { pname = "hls-fourmolu-plugin"; - version = "1.0.0.0"; - sha256 = "1x1v9jjy80w05cg2yl0nzk3h97q16bymrqy59g1s0lzihg3wizs7"; + version = "1.0.0.1"; + sha256 = "039vvbzj583kxf04d9wjam6x7pjs7hv13ysa1rapsj5san0r73y7"; libraryHaskellDepends = [ - base extra filepath fourmolu ghc ghc-boot-th ghcide hls-plugin-api - lens lsp lsp-types text - ]; - testHaskellDepends = [ - aeson base bytestring containers data-default filepath ghcide - hls-plugin-api hls-test-utils hspec-expectations lens lsp-test - lsp-types text unordered-containers + base filepath fourmolu ghc ghc-boot-th ghcide hls-plugin-api lens + lsp text ]; + testHaskellDepends = [ base filepath hls-test-utils lsp-test ]; description = "Integration with the Fourmolu code formatter"; license = lib.licenses.asl20; - hydraPlatforms = lib.platforms.none; - broken = true; }) {}; "hls-graph" = callPackage ({ mkDerivation, base, bytestring, shake, unordered-containers }: mkDerivation { pname = "hls-graph"; - version = "1.3.0.0"; - sha256 = "0mz9443jljwgi2zd6gafixfp2k8gpnrn5269qb9bjd5p4ai0bbp7"; + version = "1.4.0.0"; + sha256 = "0x54lli368wncwb41klg7jpkbzm219b417aar50mgw8igwmbzqwf"; libraryHaskellDepends = [ base bytestring shake unordered-containers ]; @@ -130586,21 +130325,19 @@ self: { }) {}; "hls-haddock-comments-plugin" = callPackage - ({ mkDerivation, base, bytestring, containers, filepath, ghc - , ghc-exactprint, ghcide, hls-plugin-api, hls-test-utils, lsp-types - , text, unordered-containers + ({ mkDerivation, base, containers, filepath, ghc, ghc-exactprint + , ghcide, hls-plugin-api, hls-test-utils, lsp-types, text + , unordered-containers }: mkDerivation { pname = "hls-haddock-comments-plugin"; - version = "1.0.0.1"; - sha256 = "1qny8y52myd3ic893wxapbqhfdcdbil8acky91lfcylr9141154i"; + version = "1.0.0.2"; + sha256 = "09gfvzz56vz0qzn1md2p0i6rdzf7v9nwm78lcw66asblq485jac6"; libraryHaskellDepends = [ base containers ghc ghc-exactprint ghcide hls-plugin-api lsp-types text unordered-containers ]; - testHaskellDepends = [ - base bytestring filepath hls-test-utils text - ]; + testHaskellDepends = [ base filepath hls-test-utils text ]; description = "Haddock comments plugin for Haskell Language Server"; license = lib.licenses.asl20; }) {}; @@ -130608,61 +130345,78 @@ self: { "hls-hlint-plugin" = callPackage ({ mkDerivation, aeson, apply-refact, base, binary, bytestring , containers, data-default, deepseq, Diff, directory, extra - , filepath, ghc, ghc-exactprint, ghcide, hashable, hlint - , hls-plugin-api, hslogger, lens, lsp, regex-tdfa, shake, temporary - , text, transformers, unordered-containers + , filepath, ghc, ghc-exactprint, ghc-lib, ghc-lib-parser-ex, ghcide + , hashable, hlint, hls-plugin-api, hslogger, lens, lsp, regex-tdfa + , temporary, text, transformers, unordered-containers }: mkDerivation { pname = "hls-hlint-plugin"; - version = "1.0.0.2"; - sha256 = "1qi654azf4l24sc7zaimbxm7z59xfvdvn33fsa5d8y7910w17d73"; + version = "1.0.1.0"; + sha256 = "0wy6mw3i5mssjg9bf0gn5411yvqzlxd63s0amrg0yci6nx78nb8p"; libraryHaskellDepends = [ aeson apply-refact base binary bytestring containers data-default - deepseq Diff directory extra filepath ghc ghc-exactprint ghcide - hashable hlint hls-plugin-api hslogger lens lsp regex-tdfa shake - temporary text transformers unordered-containers + deepseq Diff directory extra filepath ghc ghc-exactprint ghc-lib + ghc-lib-parser-ex ghcide hashable hlint hls-plugin-api hslogger + lens lsp regex-tdfa temporary text transformers + unordered-containers ]; description = "Hlint integration plugin with Haskell Language Server"; license = lib.licenses.asl20; }) {}; - "hls-plugin-api" = callPackage - ({ mkDerivation, aeson, base, containers, data-default - , dependent-map, dependent-sum, Diff, dlist, hashable, hslogger - , lens, lsp, opentelemetry, process, regex-tdfa, shake, text, unix + "hls-module-name-plugin" = callPackage + ({ mkDerivation, aeson, base, directory, filepath, ghcide + , hls-plugin-api, hls-test-utils, lsp, text, transformers , unordered-containers }: mkDerivation { - pname = "hls-plugin-api"; - version = "1.1.0.0"; - sha256 = "1i18a5gxa409882zpviy4paldaq43j4z1zmgr9mag2mn64vplrxy"; + pname = "hls-module-name-plugin"; + version = "1.0.0.0"; + sha256 = "1a41zn1k4xga9v8xqly2jbi2i11zy05cgs60b7j9fasmm991vkxb"; libraryHaskellDepends = [ - aeson base containers data-default dependent-map dependent-sum Diff - dlist hashable hslogger lens lsp opentelemetry process regex-tdfa - shake text unix unordered-containers + aeson base directory filepath ghcide hls-plugin-api lsp text + transformers unordered-containers ]; - description = "Haskell Language Server API for plugin communication"; + testHaskellDepends = [ base filepath hls-test-utils ]; + description = "Module name plugin for Haskell Language Server"; + license = lib.licenses.asl20; + }) {}; + + "hls-ormolu-plugin" = callPackage + ({ mkDerivation, base, filepath, ghc, ghc-boot-th, ghcide + , hls-plugin-api, hls-test-utils, lens, lsp, lsp-types, ormolu + , text + }: + mkDerivation { + pname = "hls-ormolu-plugin"; + version = "1.0.0.0"; + sha256 = "1iiq1m69jqrv28nzcrp9j70qvi21gsl9v9kjx0nkcdlbqzybfrfr"; + libraryHaskellDepends = [ + base filepath ghc ghc-boot-th ghcide hls-plugin-api lens lsp ormolu + text + ]; + testHaskellDepends = [ base filepath hls-test-utils lsp-types ]; + description = "Integration with the Ormolu code formatter"; license = lib.licenses.asl20; }) {}; - "hls-plugin-api_1_1_0_1" = callPackage + "hls-plugin-api" = callPackage ({ mkDerivation, aeson, base, containers, data-default - , dependent-map, dependent-sum, Diff, dlist, hashable, hls-graph - , hslogger, lens, lsp, opentelemetry, process, regex-tdfa, text - , unix, unordered-containers + , dependent-map, dependent-sum, Diff, dlist, ghc, ghc-api-compat + , hashable, hls-graph, hslogger, lens, lsp, opentelemetry, process + , regex-tdfa, text, unix, unordered-containers }: mkDerivation { pname = "hls-plugin-api"; - version = "1.1.0.1"; - sha256 = "0xxkpaqnzm39blgaa2f9v35pwnp8rx3jbmgysnsnb9nchnjprg9z"; + version = "1.1.0.2"; + sha256 = "1x49h8087x3fynagm4na72lyqyy58bb33kcrzkfcpbr3lsb8k455"; libraryHaskellDepends = [ aeson base containers data-default dependent-map dependent-sum Diff - dlist hashable hls-graph hslogger lens lsp opentelemetry process - regex-tdfa text unix unordered-containers + dlist ghc ghc-api-compat hashable hls-graph hslogger lens lsp + opentelemetry process regex-tdfa text unix unordered-containers ]; description = "Haskell Language Server API for plugin communication"; license = lib.licenses.asl20; - hydraPlatforms = lib.platforms.none; }) {}; "hls-pragmas-plugin" = callPackage @@ -130674,6 +130428,8 @@ self: { pname = "hls-pragmas-plugin"; version = "1.0.0.0"; sha256 = "1zkq95dklc6sdhczgr6l2hdkkrbrjy3zwp0qfz3qvf55gpxspzzs"; + revision = "1"; + editedCabalFile = "0xkq857i68s58101x8dc8ynvnkhjp2f8lfddg2cjkycbwhfj42cc"; libraryHaskellDepends = [ base extra fuzzy ghcide hls-plugin-api lens lsp text transformers unordered-containers @@ -130683,66 +130439,80 @@ self: { ]; description = "Pragmas plugin for Haskell Language Server"; license = lib.licenses.asl20; - hydraPlatforms = lib.platforms.none; - broken = true; + }) {}; + + "hls-refine-imports-plugin" = callPackage + ({ mkDerivation, aeson, base, containers, deepseq, filepath, ghc + , ghcide, hls-explicit-imports-plugin, hls-graph, hls-plugin-api + , hls-test-utils, lsp, text, unordered-containers + }: + mkDerivation { + pname = "hls-refine-imports-plugin"; + version = "1.0.0.0"; + sha256 = "16dn7lnsam10rvazkslrw81qahn2i2yghdbi9pdjdzd3l3nrcyl9"; + libraryHaskellDepends = [ + aeson base containers deepseq ghc ghcide + hls-explicit-imports-plugin hls-graph hls-plugin-api lsp text + unordered-containers + ]; + testHaskellDepends = [ base filepath hls-test-utils text ]; + description = "Refine imports plugin for Haskell Language Server"; + license = lib.licenses.asl20; }) {}; "hls-retrie-plugin" = callPackage ({ mkDerivation, aeson, base, containers, deepseq, directory, extra - , ghc, ghcide, hashable, hls-plugin-api, lsp, lsp-types, retrie - , safe-exceptions, shake, text, transformers, unordered-containers + , ghc, ghc-api-compat, ghcide, hashable, hls-plugin-api, lsp + , lsp-types, retrie, safe-exceptions, text, transformers + , unordered-containers }: mkDerivation { pname = "hls-retrie-plugin"; - version = "1.0.0.2"; - sha256 = "0jw1q0dk5jl80wbyvi1a6vszj9x3s7d2bnsbnyycbh4zgl33agwb"; - revision = "1"; - editedCabalFile = "03r3cb93493hr4rbd8n1ip63myssfycyijg2507kcmsly39i2qkz"; + version = "1.0.1.0"; + sha256 = "0kfip2fqjbr9qxg749ikdj42zgnchwjrp5ch84xr5z8k7hmlnw4z"; libraryHaskellDepends = [ - aeson base containers deepseq directory extra ghc ghcide hashable - hls-plugin-api lsp lsp-types retrie safe-exceptions shake text - transformers unordered-containers + aeson base containers deepseq directory extra ghc ghc-api-compat + ghcide hashable hls-plugin-api lsp lsp-types retrie safe-exceptions + text transformers unordered-containers ]; description = "Retrie integration plugin for Haskell Language Server"; license = lib.licenses.asl20; }) {}; "hls-splice-plugin" = callPackage - ({ mkDerivation, aeson, base, containers, directory, dlist, extra - , filepath, foldl, ghc, ghc-exactprint, ghcide, hls-plugin-api - , hls-test-utils, lens, lsp, retrie, shake, syb, text, transformers + ({ mkDerivation, aeson, base, containers, dlist, extra, filepath + , foldl, ghc, ghc-exactprint, ghcide, hls-plugin-api + , hls-test-utils, lens, lsp, retrie, syb, text, transformers , unliftio-core, unordered-containers }: mkDerivation { pname = "hls-splice-plugin"; - version = "1.0.0.2"; - sha256 = "15vg5dmssd54dazipc82sgkbc399mnfydc8y8i2i6lhz3hsgvpg1"; + version = "1.0.0.3"; + sha256 = "0v5m6h4pb2piihjyldy0nm6zl8iaw34gp6yqicbqkryinz0mb4pg"; libraryHaskellDepends = [ aeson base containers dlist extra foldl ghc ghc-exactprint ghcide - hls-plugin-api lens lsp retrie shake syb text transformers - unliftio-core unordered-containers - ]; - testHaskellDepends = [ - base directory extra filepath hls-test-utils text + hls-plugin-api lens lsp retrie syb text transformers unliftio-core + unordered-containers ]; + testHaskellDepends = [ base filepath hls-test-utils text ]; description = "HLS Plugin to expand TemplateHaskell Splices and QuasiQuotes"; license = lib.licenses.asl20; }) {}; "hls-stylish-haskell-plugin" = callPackage - ({ mkDerivation, base, bytestring, directory, filepath, ghc - , ghc-boot-th, ghcide, hls-plugin-api, hls-test-utils, lsp-types - , mtl, stylish-haskell, text + ({ mkDerivation, base, directory, filepath, ghc, ghc-boot-th + , ghcide, hls-plugin-api, hls-test-utils, lsp-types + , stylish-haskell, text }: mkDerivation { pname = "hls-stylish-haskell-plugin"; - version = "1.0.0.0"; - sha256 = "1f2banm7lbl2grqrm0d9dnhk5fimxqan3xlsl4hjyqgy42xqqai2"; + version = "1.0.0.1"; + sha256 = "1dkgvh169mf0s0vnyfgb965k393hm622cd2ssl6clgbaq2q20qlf"; libraryHaskellDepends = [ base directory filepath ghc ghc-boot-th ghcide hls-plugin-api - lsp-types mtl stylish-haskell text + lsp-types stylish-haskell text ]; - testHaskellDepends = [ base bytestring hls-test-utils text ]; + testHaskellDepends = [ base filepath hls-test-utils ]; description = "Integration with the Stylish Haskell code formatter"; license = lib.licenses.asl20; }) {}; @@ -130750,20 +130520,22 @@ self: { "hls-tactics-plugin" = callPackage ({ mkDerivation, aeson, base, containers, deepseq, directory, extra , filepath, fingertree, generic-lens, ghc, ghc-boot-th - , ghc-exactprint, ghc-source-gen, ghcide, hls-plugin-api - , hls-test-utils, hspec, hspec-discover, hspec-expectations, lens - , lsp, lsp-types, mtl, QuickCheck, refinery, retrie, shake, syb - , tasty-hspec, tasty-hunit, text, transformers + , ghc-exactprint, ghc-source-gen, ghcide, hls-graph, hls-plugin-api + , hls-test-utils, hspec, hspec-discover, hspec-expectations + , hyphenation, lens, lsp, lsp-types, megaparsec, mtl + , parser-combinators, prettyprinter, QuickCheck, refinery, retrie + , syb, tasty-hspec, tasty-hunit, text, transformers , unordered-containers }: mkDerivation { pname = "hls-tactics-plugin"; - version = "1.1.0.0"; - sha256 = "13qysl6dwrn15kn310r04g1yv7jj9xhar659lrc8h230c4khn2qv"; + version = "1.2.0.0"; + sha256 = "0djyskzsv1hz92p6x62nf78j1f0x9nl55fl5mzc29lncqib8g8ak"; libraryHaskellDepends = [ aeson base containers deepseq directory extra filepath fingertree generic-lens ghc ghc-boot-th ghc-exactprint ghc-source-gen ghcide - hls-plugin-api lens lsp mtl refinery retrie shake syb text + hls-graph hls-plugin-api hyphenation lens lsp megaparsec mtl + parser-combinators prettyprinter refinery retrie syb text transformers unordered-containers ]; testHaskellDepends = [ @@ -130779,20 +130551,18 @@ self: { "hls-test-utils" = callPackage ({ mkDerivation, aeson, async, base, blaze-markup, bytestring , containers, data-default, directory, extra, filepath, ghcide - , hls-plugin-api, hspec, hspec-core, lens, lsp, lsp-test, lsp-types - , shake, tasty, tasty-expected-failure, tasty-golden, tasty-hunit - , tasty-rerun, temporary, text, unordered-containers + , hls-graph, hls-plugin-api, hspec, hspec-core, lens, lsp, lsp-test + , lsp-types, tasty, tasty-expected-failure, tasty-golden + , tasty-hunit, tasty-rerun, temporary, text, unordered-containers }: mkDerivation { pname = "hls-test-utils"; - version = "1.0.0.0"; - sha256 = "18n7vb9fa39jkgr0gvsrjfc0nh09w2xlniifb25bn6z3qc3w0h6i"; - revision = "1"; - editedCabalFile = "048all6d50kyzln2nfp096ry5zwbair2srifhshnipg8qvs2cwpl"; + version = "1.0.1.0"; + sha256 = "0pqypxqwh8dm4xl7bpfqdvzaxw98v7bwbzkssgx5zgczhzs2y8mi"; libraryHaskellDepends = [ aeson async base blaze-markup bytestring containers data-default - directory extra filepath ghcide hls-plugin-api hspec hspec-core - lens lsp lsp-test lsp-types shake tasty tasty-expected-failure + directory extra filepath ghcide hls-graph hls-plugin-api hspec + hspec-core lens lsp lsp-test lsp-types tasty tasty-expected-failure tasty-golden tasty-hunit tasty-rerun temporary text unordered-containers ]; @@ -133168,6 +132938,24 @@ self: { license = lib.licenses.gpl3Only; }) {}; + "hosc_0_19_1" = callPackage + ({ mkDerivation, base, binary, blaze-builder, bytestring + , data-binary-ieee754, network, time, transformers + }: + mkDerivation { + pname = "hosc"; + version = "0.19.1"; + sha256 = "08q218p1skqxwa7f55nsgmv9z8digf1c0f1wi6p562q6d4i044z7"; + enableSeparateDataOutput = true; + libraryHaskellDepends = [ + base binary blaze-builder bytestring data-binary-ieee754 network + time transformers + ]; + description = "Haskell Open Sound Control"; + license = lib.licenses.gpl3Only; + hydraPlatforms = lib.platforms.none; + }) {}; + "hosc-json" = callPackage ({ mkDerivation, aeson, attoparsec, base, bifunctors, bytestring , hosc, json, text, transformers, unordered-containers, utf8-string @@ -135897,18 +135685,19 @@ self: { "hsc3" = callPackage ({ mkDerivation, array, base, binary, bytestring, containers - , data-ordlist, directory, filepath, hosc, murmur-hash, network - , process, random, safe, split, transformers, vector + , data-binary-ieee754, data-ordlist, directory, filepath, hosc, mtl + , murmur-hash, network, process, random, safe, split, transformers + , vector }: mkDerivation { pname = "hsc3"; - version = "0.18"; - sha256 = "1j6jdgvvk3pxyky63khszv0cim4b7wbffpcpa098ii98fib0r47i"; + version = "0.19.1"; + sha256 = "0yz8h83hrnw28bwqqaa792w89y2pz1lkv3zwmwj9p2z8xv0hf14n"; enableSeparateDataOutput = true; libraryHaskellDepends = [ - array base binary bytestring containers data-ordlist directory - filepath hosc murmur-hash network process random safe split - transformers vector + array base binary bytestring containers data-binary-ieee754 + data-ordlist directory filepath hosc mtl murmur-hash network + process random safe split transformers vector ]; description = "Haskell SuperCollider"; license = lib.licenses.gpl3Only; @@ -137167,8 +136956,8 @@ self: { pname = "hslogger"; version = "1.3.1.0"; sha256 = "0nyar9xcblx5jwks85y8f4jfy9k1h4ss6rvj4mdbiidrq3v688vz"; - revision = "2"; - editedCabalFile = "1bkv1rbbx0bhyvrmnsyspm30q48820a6rym0msxjdzp8r56rbm9w"; + revision = "3"; + editedCabalFile = "04mda3bwr2a00f5nbkqc84d46lmqfsk3gibzg3amdh74ngb451xq"; libraryHaskellDepends = [ base bytestring containers deepseq network network-bsd old-locale time unix @@ -138229,8 +138018,8 @@ self: { ({ mkDerivation, base, hspec, hspec-core, HUnit, leancheck }: mkDerivation { pname = "hspec-leancheck"; - version = "0.0.4"; - sha256 = "06amq8467wv2jkx9f4pif0z5rgvj35hdp1yffqkxyxh65148prcb"; + version = "0.0.6"; + sha256 = "1pbvbqjy3smplax626g6dwycqqn9w9i0pg30lqzzq0r32w53z7si"; libraryHaskellDepends = [ base hspec hspec-core HUnit leancheck ]; testHaskellDepends = [ base hspec leancheck ]; description = "LeanCheck support for the Hspec test framework"; @@ -142590,6 +142379,8 @@ self: { ]; description = "File Dump"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "hw-eliasfano" = callPackage @@ -143569,8 +143360,8 @@ self: { }: mkDerivation { pname = "hwk"; - version = "0.5"; - sha256 = "1nn8021nf7pwr8r0ffvsr3yjvjgv4f15l7j8s9pisi4n280lv8h0"; + version = "0.6"; + sha256 = "1xn3rn81ixx5mil8x1s26cxsdnpq2mhbfcs26969rk3k9lbzvc38"; isLibrary = false; isExecutable = true; enableSeparateDataOutput = true; @@ -144602,6 +144393,35 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; + "hypertypes" = callPackage + ({ mkDerivation, array, base, base-compat, binary, constraints + , containers, criterion, deepseq, generic-constraints, generic-data + , lattices, lens, monad-st, mtl, pretty, QuickCheck + , show-combinators, template-haskell, text, th-abstraction + , transformers + }: + mkDerivation { + pname = "hypertypes"; + version = "0.1.0.1"; + sha256 = "0b3cnjw07pryqslnx0k6lxdpwnihnk6pnhp6l9d09mqyxymd9nyx"; + libraryHaskellDepends = [ + array base base-compat binary constraints containers deepseq + generic-constraints generic-data lattices lens monad-st mtl pretty + QuickCheck show-combinators template-haskell th-abstraction + transformers + ]; + testHaskellDepends = [ + base constraints containers generic-constraints generic-data + lattices lens monad-st mtl pretty text transformers + ]; + benchmarkHaskellDepends = [ + base constraints containers criterion generic-constraints + generic-data lattices lens monad-st mtl pretty transformers + ]; + description = "Typed ASTs"; + license = lib.licenses.bsd3; + }) {}; + "hyphenate" = callPackage ({ mkDerivation, base, containers }: mkDerivation { @@ -145286,8 +145106,8 @@ self: { pname = "identicon"; version = "0.2.2"; sha256 = "0qzj2063sh7phbqyxqxf96avz1zcwd1ry06jdqxwkg55q3yb8y9n"; - revision = "3"; - editedCabalFile = "0vya6zm3nnbdv3wmj3dwqwwjgsagql8q17078knhjddv2lm8m49q"; + revision = "4"; + editedCabalFile = "1mlmn7ccns2rnhgmnlq9m2rqc9mgj0262ckqbm01w1fiycw3nq7b"; enableSeparateDataOutput = true; libraryHaskellDepends = [ base bytestring JuicyPixels ]; testHaskellDepends = [ @@ -146462,7 +146282,7 @@ self: { }) {}; "imperative-edsl" = callPackage - ({ mkDerivation, array, base, BoundedChan, containers + ({ mkDerivation, array, base, BoundedChan, constraints, containers , data-default-class, deepseq, directory, exception-transformers , filepath, ghc-prim, language-c-quote, mainland-pretty, microlens , microlens-mtl, microlens-th, mtl, operational-alacarte, process @@ -146470,11 +146290,11 @@ self: { }: mkDerivation { pname = "imperative-edsl"; - version = "0.8.1"; - sha256 = "1z1a7b7m69m9xagvfa6xx3l1j0s7lrlvp4n09lra1x3q7lpfgnra"; + version = "0.8.2"; + sha256 = "1m8ynjzi97ps9x9sf03zg7y2vq15kzch9fdnzmh9wsmmkfpqljzs"; libraryHaskellDepends = [ - array base BoundedChan containers data-default-class deepseq - directory exception-transformers ghc-prim language-c-quote + array base BoundedChan constraints containers data-default-class + deepseq directory exception-transformers ghc-prim language-c-quote mainland-pretty microlens microlens-mtl microlens-th mtl operational-alacarte process srcloc stm syntactic time ]; @@ -146583,8 +146403,8 @@ self: { }: mkDerivation { pname = "implicit-hie-cradle"; - version = "0.3.0.2"; - sha256 = "185pisgqp95zkpcksqiwiyghmg01cvfa7g6wzc31004mwwb114ih"; + version = "0.3.0.3"; + sha256 = "1rv6piiyy0f9l2pmwlc3j47g2lnz7sbipb5jdn1m76z4j66y05n9"; libraryHaskellDepends = [ base base16-bytestring bytestring containers directory extra filepath hie-bios hslogger implicit-hie process temporary text time @@ -146880,12 +146700,9 @@ self: { ({ mkDerivation, base, template-haskell }: mkDerivation { pname = "include-env"; - version = "0.1.1.0"; - sha256 = "0c65dn8r0rizmz71jv9vjf6l3cny31vi0d69jh9i72xwx14nlr77"; - isLibrary = true; - isExecutable = true; + version = "0.1.3.0"; + sha256 = "0yj7gbsxdjihf243c0xym5yxdkyr1s8qs8dvxhf7xf5pw77y03qg"; libraryHaskellDepends = [ base template-haskell ]; - executableHaskellDepends = [ base ]; description = "Include the value of an environment variable at compile time"; license = lib.licenses.bsd3; }) {}; @@ -149623,8 +149440,8 @@ self: { }: mkDerivation { pname = "ipa"; - version = "0.3.1"; - sha256 = "1l658qnqfs63dwarmiaw7vf6v2xl8hhvzlb95w168rpa7wfkrh5n"; + version = "0.3.1.1"; + sha256 = "08n47l0vjcyp0g3wlwww0cf8cyqfy6mj5480r94in7l3zr7vx6a4"; libraryHaskellDepends = [ attoparsec base template-haskell text unicode-transforms ]; @@ -149688,23 +149505,26 @@ self: { ({ mkDerivation, aeson, base, bytestring, directory, directory-tree , doctest, envy, flow, Glob, http-media, lens, lens-aeson , monad-logger, network-ip, QuickCheck, regex-compat, rio, servant - , servant-client, servant-multipart, servant-server, swagger2, text - , vector, yaml + , servant-client, servant-multipart, servant-multipart-api + , servant-multipart-client, servant-server, swagger2, text, vector + , yaml }: mkDerivation { pname = "ipfs"; - version = "1.3.0.3"; - sha256 = "08g1lvh7w46qsg80h5nm3r333zbhl2q4shnrm5jann4p3g5ii08x"; + version = "1.3.1"; + sha256 = "0jf5wragwcqhal860s1i26dk32dmnhsyl4n85mr8sc8v626bkj76"; libraryHaskellDepends = [ aeson base bytestring envy flow Glob http-media lens monad-logger network-ip regex-compat rio servant servant-client - servant-multipart servant-server swagger2 text vector + servant-multipart servant-multipart-api servant-multipart-client + servant-server swagger2 text vector ]; testHaskellDepends = [ aeson base bytestring directory directory-tree doctest envy flow Glob http-media lens lens-aeson monad-logger network-ip QuickCheck regex-compat rio servant servant-client servant-multipart - servant-server swagger2 text vector yaml + servant-multipart-api servant-multipart-client servant-server + swagger2 text vector yaml ]; description = "Access IPFS locally and remotely"; license = lib.licenses.asl20; @@ -151887,22 +151707,23 @@ self: { }) {}; "jenkinsPlugins2nix" = callPackage - ({ mkDerivation, ansi-wl-pprint, attoparsec, base, bimap - , bytestring, containers, cryptohash, hnix, http-conduit, mtl - , optparse-applicative, tasty-hspec, text, zip-archive + ({ mkDerivation, attoparsec, base, bimap, bytestring, containers + , cryptohash, hnix, http-conduit, mtl, optparse-applicative + , prettyprinter, prettyprinter-ansi-terminal, tasty-hspec, text + , zip-archive }: mkDerivation { pname = "jenkinsPlugins2nix"; - version = "0.2.0.2"; - sha256 = "04ddcri3rwszxjl65c5kha6lkrf3w89gfri2cdghdq0znl51hvf5"; + version = "0.3.0.1"; + sha256 = "0jqapzgq0z346af1626zl67dnnpr6i7bsqrhxhiz32w70kjhisa1"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ - ansi-wl-pprint attoparsec base bytestring containers cryptohash - hnix http-conduit mtl text zip-archive + attoparsec base bytestring containers cryptohash hnix http-conduit + mtl prettyprinter text zip-archive ]; executableHaskellDepends = [ - ansi-wl-pprint base bimap optparse-applicative text + base bimap optparse-applicative prettyprinter-ansi-terminal text ]; testHaskellDepends = [ base containers tasty-hspec text ]; description = "Generate nix for Jenkins plugins"; @@ -151970,21 +151791,6 @@ self: { ({ mkDerivation, base, mtl, parsec, tasty, tasty-hunit, text }: mkDerivation { pname = "jira-wiki-markup"; - version = "1.3.5"; - sha256 = "0k5z2lxj5xp9hpr3mmdbzkd0yn718477pqjvymyz361h938rqnz5"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ base mtl parsec text ]; - executableHaskellDepends = [ base text ]; - testHaskellDepends = [ base parsec tasty tasty-hunit text ]; - description = "Handle Jira wiki markup"; - license = lib.licenses.mit; - }) {}; - - "jira-wiki-markup_1_4_0" = callPackage - ({ mkDerivation, base, mtl, parsec, tasty, tasty-hunit, text }: - mkDerivation { - pname = "jira-wiki-markup"; version = "1.4.0"; sha256 = "0p6axj6km4440ss5naw68r3r85si4qxqgrklp6ssfyapawy0s88w"; isLibrary = true; @@ -151994,7 +151800,6 @@ self: { testHaskellDepends = [ base parsec tasty tasty-hunit text ]; description = "Handle Jira wiki markup"; license = lib.licenses.mit; - hydraPlatforms = lib.platforms.none; }) {}; "jmacro" = callPackage @@ -155765,19 +155570,19 @@ self: { ({ mkDerivation, aeson, aeson-casing, base, base64-bytestring , bytestring, containers, exceptions, hashable, hslogger , http-api-data, http-client, http-types, jose, lens, lens-aeson - , mtl, safe, string-conversions, text, unordered-containers, word8 - , wreq + , monad-time, mtl, safe, string-conversions, text + , unordered-containers, word8, wreq }: mkDerivation { pname = "keycloak-hs"; - version = "2.1.0"; - sha256 = "0yki4fqbgirnvcaf5p00pskh91abspivgkkdi9m93andz56vl23v"; + version = "3.0.1"; + sha256 = "1311rzvib7cbb2j4bjqbd5y03frsqqn32grhypvk0fplrdr1hazn"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ aeson aeson-casing base base64-bytestring bytestring containers exceptions hashable hslogger http-api-data http-client http-types - jose lens lens-aeson mtl safe string-conversions text + jose lens lens-aeson monad-time mtl safe string-conversions text unordered-containers word8 wreq ]; executableHaskellDepends = [ base hslogger ]; @@ -158104,25 +157909,6 @@ self: { "language-c" = callPackage ({ mkDerivation, alex, array, base, bytestring, containers, deepseq - , directory, filepath, happy, pretty, process, syb - }: - mkDerivation { - pname = "language-c"; - version = "0.8.3"; - sha256 = "0bi02jdirkys8v7flf39vrpla2a74z1z0sdhy9lb9v7cmcc6rmpk"; - libraryHaskellDepends = [ - array base bytestring containers deepseq directory filepath pretty - process syb - ]; - libraryToolDepends = [ alex happy ]; - testHaskellDepends = [ base directory filepath process ]; - description = "Analysis and generation of C code"; - license = lib.licenses.bsd3; - maintainers = with lib.maintainers; [ expipiplus1 ]; - }) {}; - - "language-c_0_9_0_1" = callPackage - ({ mkDerivation, alex, array, base, bytestring, containers, deepseq , directory, filepath, happy, mtl, pretty, process }: mkDerivation { @@ -158137,7 +157923,6 @@ self: { testHaskellDepends = [ base directory filepath process ]; description = "Analysis and generation of C code"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; maintainers = with lib.maintainers; [ expipiplus1 ]; }) {}; @@ -159285,8 +159070,8 @@ self: { ({ mkDerivation, base, pretty }: mkDerivation { pname = "language-vhdl"; - version = "0.1.3"; - sha256 = "03n5cnr71zq3fl0ajjiyzjq2x2848lwd9gfp4kjkkjaxw0lb6bka"; + version = "0.1.4"; + sha256 = "19nz1qym3b3vfzfhiqaf2pg73am7l0c6dy1b7lxzjfbi7s0jfnva"; libraryHaskellDepends = [ base pretty ]; description = "VHDL AST and pretty printer in Haskell"; license = lib.licenses.bsd3; @@ -159726,8 +159511,8 @@ self: { }: mkDerivation { pname = "launchdarkly-server-sdk"; - version = "2.1.1"; - sha256 = "1gjiwj8x57z9qs9gxdgqyih38i8rkkvjak4va5cg44qp3rflmby1"; + version = "2.2.0"; + sha256 = "0hi6w7rb1qf3dzla5cjmhz25a4ynkc29mpnixgdx5i8p771zyg3z"; libraryHaskellDepends = [ aeson attoparsec base base16-bytestring bytestring bytestring-conversion clock containers cryptohash exceptions extra @@ -163071,14 +162856,15 @@ self: { "lifx-lan" = callPackage ({ mkDerivation, base, binary, bytestring, composition, containers , extra, monad-loops, mtl, network, random, safe, text, time + , transformers }: mkDerivation { pname = "lifx-lan"; - version = "0.1.0.2"; - sha256 = "0kk89h1jxz7djxcxz4scwk33r9y1raq8mskypcyx93hzs0f1b4y1"; + version = "0.3.0"; + sha256 = "051h65m47vnhakg37a8dj1mbisxc9pb5zk4yp41dvcr0as2x4ngl"; libraryHaskellDepends = [ base binary bytestring composition containers extra monad-loops mtl - network random safe text time + network random safe text time transformers ]; description = "LIFX LAN API"; license = lib.licenses.bsd3; @@ -163482,6 +163268,8 @@ self: { testHaskellDepends = [ base doctest ]; description = "Lifting linear vector spaces into Accelerate"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "linear-algebra-cblas" = callPackage @@ -169213,8 +169001,8 @@ self: { }: mkDerivation { pname = "magma"; - version = "0.6.0.0"; - sha256 = "054drdwpks29mf22imwng8k6i7701yl9hijb4wh2a8wa4axssn9w"; + version = "0.6.1.0"; + sha256 = "08jbc29w6gw82z6jwhqwd123dh7nbxn6gs5hqqzj3d84ik268hzx"; libraryHaskellDepends = [ base deepseq profunctors semigroups ]; testHaskellDepends = [ base ghc-prim ]; description = "magma is an algebraic structure"; @@ -171901,34 +171689,6 @@ self: { }: mkDerivation { pname = "mcmc"; - version = "0.4.0.0"; - sha256 = "1wfp73qis73xmzxwbxx3r9z55x6ydk5c6j0daf81zyllkv4mw9v4"; - libraryHaskellDepends = [ - aeson base bytestring circular containers data-default deepseq - directory dirichlet double-conversion log-domain microlens - monad-parallel mwc-random pretty-show primitive statistics time - transformers vector zlib - ]; - testHaskellDepends = [ - base hspec log-domain mwc-random statistics - ]; - benchmarkHaskellDepends = [ - base criterion log-domain microlens mwc-random - ]; - description = "Sample from a posterior using Markov chain Monte Carlo"; - license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; - }) {}; - - "mcmc_0_5_0_0" = callPackage - ({ mkDerivation, aeson, base, bytestring, circular, containers - , criterion, data-default, deepseq, directory, dirichlet - , double-conversion, hspec, log-domain, microlens, monad-parallel - , mwc-random, pretty-show, primitive, statistics, time - , transformers, vector, zlib - }: - mkDerivation { - pname = "mcmc"; version = "0.5.0.0"; sha256 = "0vfbbzk7rwgan0lf1qxr03mbxlxgq1jccbsvffw4hy1k2s65wysi"; libraryHaskellDepends = [ @@ -177976,8 +177736,8 @@ self: { }: mkDerivation { pname = "monadic-recursion-schemes"; - version = "0.1.13.0"; - sha256 = "04n81zx1h68w9v8fihwhfbkyv7lb84p3nzppqf7zc55znbn67lym"; + version = "0.1.13.1"; + sha256 = "1lhawvr2nywdha59ci142xk1ijqp11pgn582zgb897zrqc2wbv7s"; libraryHaskellDepends = [ base comonad containers free mtl recursion-schemes transformers ]; @@ -178244,8 +178004,8 @@ self: { }: mkDerivation { pname = "mongoDB"; - version = "2.7.0.0"; - sha256 = "1gj97hfznhmfdvwdgf6fkizla2d9cy31933qw5i8p7fmh7igzgvk"; + version = "2.7.1.1"; + sha256 = "186ck64vk4s9jligj6mq3qbpm1mb87m7zs8p3jbizpv0fcgnwq70"; libraryHaskellDepends = [ array base base16-bytestring base64-bytestring binary bson bytestring conduit conduit-extra containers cryptohash @@ -178533,25 +178293,6 @@ self: { }: mkDerivation { pname = "monoid-subclasses"; - version = "1.0.1"; - sha256 = "16ypv15brywq8s403v0c586py3pw2gii8z2i91l71qjq95ii8b53"; - libraryHaskellDepends = [ - base bytestring containers primes text vector - ]; - testHaskellDepends = [ - base bytestring containers primes QuickCheck quickcheck-instances - tasty tasty-quickcheck text vector - ]; - description = "Subclasses of Monoid"; - license = lib.licenses.bsd3; - }) {}; - - "monoid-subclasses_1_1" = callPackage - ({ mkDerivation, base, bytestring, containers, primes, QuickCheck - , quickcheck-instances, tasty, tasty-quickcheck, text, vector - }: - mkDerivation { - pname = "monoid-subclasses"; version = "1.1"; sha256 = "1bv0ripdw53121aj39zalczkfwrajpzzd1i99jn49sr4bfwgy3p4"; libraryHaskellDepends = [ @@ -178563,7 +178304,6 @@ self: { ]; description = "Subclasses of Monoid"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "monoid-transformer" = callPackage @@ -182254,20 +181994,6 @@ self: { }) {}; "mwc-random" = callPackage - ({ mkDerivation, base, math-functions, primitive, time, vector }: - mkDerivation { - pname = "mwc-random"; - version = "0.14.0.0"; - sha256 = "18pg24sw3b79b32cwx8q01q4k0lm34mwr3l6cdkchl8alvd0wdq0"; - libraryHaskellDepends = [ - base math-functions primitive time vector - ]; - doCheck = false; - description = "Fast, high quality pseudo random number generation"; - license = lib.licenses.bsd3; - }) {}; - - "mwc-random_0_15_0_1" = callPackage ({ mkDerivation, base, bytestring, doctest, gauge, math-functions , mersenne-random, primitive, QuickCheck, random, tasty , tasty-hunit, tasty-quickcheck, time, vector @@ -182291,7 +182017,6 @@ self: { doCheck = false; description = "Fast, high quality pseudo random number generation"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "mwc-random-accelerate" = callPackage @@ -184259,8 +183984,8 @@ self: { }: mkDerivation { pname = "net-mqtt"; - version = "0.7.1.0"; - sha256 = "1l19hmc3623gsx1yv0wcbgcy22p549zyrvfv44khzd45fl3fxfb7"; + version = "0.7.1.1"; + sha256 = "0iy39a2rncaasf5psjnsgkmigggx9apk9xvq354idw69b1bjhvnv"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -184911,16 +184636,14 @@ self: { license = lib.licenses.bsd3; }) {}; - "network_3_1_2_1" = callPackage + "network_3_1_2_2" = callPackage ({ mkDerivation, base, bytestring, deepseq, directory, hspec , hspec-discover, HUnit, QuickCheck, temporary }: mkDerivation { pname = "network"; - version = "3.1.2.1"; - sha256 = "0jlx8dls0h95znpcb66bd95k4mp3aaa733h89pq5ymyb8m29bapw"; - revision = "1"; - editedCabalFile = "12swsygnsnyvfjm3p9b6z8jh8vbw3q5akmggacsvr4fdm2p6v38q"; + version = "3.1.2.2"; + sha256 = "1dhflq7im3sjc6ascf12z73mhw7cqv1aqfvv3y5m9izr485jq0am"; libraryHaskellDepends = [ base bytestring deepseq directory ]; testHaskellDepends = [ base bytestring directory hspec HUnit QuickCheck temporary @@ -185099,8 +184822,8 @@ self: { pname = "network-bsd"; version = "2.8.1.0"; sha256 = "0kid0811lv4x761fd5gv6lsc8p5j2bn41rfd366pjb642p562jfr"; - revision = "3"; - editedCabalFile = "1hc3jdbmpq2wxh82xfx452v2m2l97jbdaqqbmj5nz4lljxa2696r"; + revision = "4"; + editedCabalFile = "1gd9a8j7fwg0jz0s6il5fk9sl0hm19ja1w56ix51wa0qi2h5x56d"; libraryHaskellDepends = [ base deepseq network ]; description = "POSIX network database (<netdb.h>) API"; license = lib.licenses.bsd3; @@ -187063,6 +186786,8 @@ self: { ]; description = "Lightweight dependency management with Nix"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "nix-tools" = callPackage @@ -187759,8 +187484,8 @@ self: { pname = "nonce"; version = "1.0.7"; sha256 = "1q9ph0aq51mvdvydnriqd12sfin36pfb8f588zgac1ybn8r64ksb"; - revision = "1"; - editedCabalFile = "1i6f4nwp4xn31as6plqrf6wp6gn3ylwdi77h99572jy7p3985aw1"; + revision = "2"; + editedCabalFile = "09xvg4lpmb1hw153afhbjrdg9v3npfwpdfhpv5y8b0qvb4zi3n9q"; libraryHaskellDepends = [ base base64-bytestring bytestring entropy text transformers unliftio unliftio-core @@ -188347,6 +188072,29 @@ self: { license = lib.licenses.bsd3; }) {}; + "nri-http" = callPackage + ({ mkDerivation, aeson, base, bytestring, conduit, http-client + , http-client-tls, http-types, mime-types, network-uri + , nri-observability, nri-prelude, safe-exceptions, text, wai, warp + }: + mkDerivation { + pname = "nri-http"; + version = "0.1.0.1"; + sha256 = "11zrqfljnq922frbsyiwap8ayp8faq7cwbrmk0npg4qgv4gv2pz2"; + libraryHaskellDepends = [ + aeson base bytestring conduit http-client http-client-tls + http-types mime-types network-uri nri-observability nri-prelude + safe-exceptions text + ]; + testHaskellDepends = [ + aeson base bytestring conduit http-client http-client-tls + http-types mime-types network-uri nri-observability nri-prelude + safe-exceptions text wai warp + ]; + description = "Make Elm style HTTP requests"; + license = lib.licenses.bsd3; + }) {}; + "nri-observability" = callPackage ({ mkDerivation, aeson, aeson-pretty, async, base, bugsnag-hs , bytestring, directory, hostname, http-client, http-client-tls @@ -188355,8 +188103,8 @@ self: { }: mkDerivation { pname = "nri-observability"; - version = "0.1.0.2"; - sha256 = "19nil7vyjbvbjlapvrxky8fkxdl3f2xhqdi3a5m5i5lyawm74b6z"; + version = "0.1.0.3"; + sha256 = "0njpgc873rh09hkg7pnagkmmrd8nibdq4q1p44wa3n71xzwzy771"; libraryHaskellDepends = [ aeson aeson-pretty async base bugsnag-hs bytestring directory hostname http-client http-client-tls nri-env-parser nri-prelude @@ -188371,6 +188119,31 @@ self: { license = lib.licenses.bsd3; }) {}; + "nri-observability_0_1_1_0" = callPackage + ({ mkDerivation, aeson, aeson-pretty, async, base, bugsnag-hs + , bytestring, directory, hostname, http-client, http-client-tls + , nri-env-parser, nri-prelude, random, safe-exceptions, stm, text + , time, unordered-containers, uuid + }: + mkDerivation { + pname = "nri-observability"; + version = "0.1.1.0"; + sha256 = "17zr60z6i07cnqs6x2r3lzd5hk0g8sh10hyckh84ynyjpdzksggd"; + libraryHaskellDepends = [ + aeson aeson-pretty async base bugsnag-hs bytestring directory + hostname http-client http-client-tls nri-env-parser nri-prelude + random safe-exceptions stm text time unordered-containers uuid + ]; + testHaskellDepends = [ + aeson aeson-pretty async base bugsnag-hs bytestring directory + hostname http-client http-client-tls nri-env-parser nri-prelude + random safe-exceptions stm text time unordered-containers uuid + ]; + description = "Report log spans collected by nri-prelude"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "nri-prelude" = callPackage ({ mkDerivation, aeson, aeson-pretty, async, auto-update, base , bytestring, containers, directory, exceptions, filepath, ghc @@ -188380,8 +188153,8 @@ self: { }: mkDerivation { pname = "nri-prelude"; - version = "0.6.0.1"; - sha256 = "10gfw6vs2vc1jll80lirzjplwx3p3l9yssddqjklnd67rnvm95r4"; + version = "0.6.0.2"; + sha256 = "002bq6qwaiw4v30b677hg8pv2sa9iaqdv90h02fbq4pkhqsqhpkw"; libraryHaskellDepends = [ aeson aeson-pretty async auto-update base bytestring containers directory exceptions filepath ghc hedgehog junit-xml pretty-diff @@ -189404,21 +189177,20 @@ self: { "o-clock" = callPackage ({ mkDerivation, base, doctest, ghc-prim, Glob, hedgehog - , markdown-unlit, tasty, tasty-hedgehog, tasty-hspec, type-spec + , hspec-expectations, markdown-unlit, tasty, tasty-hedgehog + , tasty-hunit-compat, type-spec }: mkDerivation { pname = "o-clock"; - version = "1.2.0.1"; - sha256 = "039p0jjpmlkbz21szfj4abnjyi0k34m6b8fqpsmyj94nbq1qldy4"; - revision = "1"; - editedCabalFile = "0fxgbi56x61sm84qwks1hk8maxn7zl4jfbhgxfwq6w0jg1xdqdhm"; + version = "1.2.1"; + sha256 = "17y44aajipysw1p268rq8a6lhv9cdhkvxjcpcdij93sqp818q96z"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base ghc-prim ]; executableHaskellDepends = [ base ]; testHaskellDepends = [ - base doctest Glob hedgehog markdown-unlit tasty tasty-hedgehog - tasty-hspec type-spec + base doctest Glob hedgehog hspec-expectations markdown-unlit tasty + tasty-hedgehog tasty-hunit-compat type-spec ]; testToolDepends = [ doctest markdown-unlit ]; description = "Type-safe time library"; @@ -189711,8 +189483,8 @@ self: { ({ mkDerivation, base, containers }: mkDerivation { pname = "observable-sharing"; - version = "0.2.4"; - sha256 = "1lqig0r4f7gqjdymsc4jpwspc3jr01xkmk5cgiqr5ngxvk6zw3j0"; + version = "0.2.5"; + sha256 = "06mz3snyqx7b67dl786mwsc75nfnq3a40p581rhaf1y4r7cr6iv6"; libraryHaskellDepends = [ base containers ]; description = "Simple observable sharing"; license = lib.licenses.bsd3; @@ -189894,20 +189666,21 @@ self: { inherit (pkgs) systemd;}; "odbc" = callPackage - ({ mkDerivation, async, base, bytestring, containers, deepseq - , formatting, hspec, optparse-applicative, parsec, QuickCheck - , semigroups, template-haskell, text, time, transformers, unixODBC - , unliftio-core, weigh + ({ mkDerivation, async, attoparsec, base, bytestring, containers + , deepseq, formatting, hashable, hspec, optparse-applicative + , parsec, QuickCheck, semigroups, template-haskell, text, time + , transformers, unixODBC, unliftio-core, weigh }: mkDerivation { pname = "odbc"; - version = "0.2.2"; - sha256 = "0dkkkrv43kl3643i0j4hgj1mcsk1jhrl086dygd6hqb9hd4156k5"; + version = "0.2.5"; + sha256 = "157g6ys5j5kj4cc1jp2rmcpwrax4fh7bx1zvvicmrf88qaq56v2h"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ - async base bytestring containers deepseq formatting parsec - semigroups template-haskell text time transformers unliftio-core + async attoparsec base bytestring containers deepseq formatting + hashable parsec semigroups template-haskell text time transformers + unliftio-core ]; librarySystemDepends = [ unixODBC ]; executableHaskellDepends = [ @@ -190743,6 +190516,35 @@ self: { license = lib.licenses.bsd3; }) {}; + "opaleye_0_7_2_0" = callPackage + ({ mkDerivation, aeson, base, base16-bytestring, bytestring + , case-insensitive, containers, contravariant, dotenv, hspec + , hspec-discover, multiset, postgresql-simple, pretty + , product-profunctors, profunctors, QuickCheck, scientific + , semigroups, text, time, time-locale-compat, transformers, uuid + , void + }: + mkDerivation { + pname = "opaleye"; + version = "0.7.2.0"; + sha256 = "1qz34isgb5hl2ab5vij3zw1h3xwvl3a0d1k02n156xszibnkcgf1"; + libraryHaskellDepends = [ + aeson base base16-bytestring bytestring case-insensitive + contravariant postgresql-simple pretty product-profunctors + profunctors scientific semigroups text time time-locale-compat + transformers uuid void + ]; + testHaskellDepends = [ + aeson base bytestring containers contravariant dotenv hspec + hspec-discover multiset postgresql-simple product-profunctors + profunctors QuickCheck semigroups text time transformers uuid + ]; + testToolDepends = [ hspec-discover ]; + description = "An SQL-generating DSL targeting PostgreSQL"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "opaleye-classy" = callPackage ({ mkDerivation, base, bytestring, lens, mtl, opaleye , postgresql-simple, product-profunctors, transformers @@ -192761,6 +192563,20 @@ self: { license = lib.licenses.bsd3; }) {}; + "opusfile" = callPackage + ({ mkDerivation, base, bytestring, opusfile }: + mkDerivation { + pname = "opusfile"; + version = "0.1.0.0"; + sha256 = "12mjkmsffnid48sjc6j1wrikw4pl1yz5jk6bgnarv86wcs30w54a"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ base bytestring ]; + librarySystemDepends = [ opusfile ]; + description = "FFI bindings for libopusfile"; + license = lib.licenses.bsd3; + }) {inherit (pkgs) opusfile;}; + "orbits" = callPackage ({ mkDerivation, ad, base, Cabal, cabal-doctest, checkers, doctest , exact-real, lens, linear, QuickCheck, random, tagged, tasty @@ -194313,64 +194129,6 @@ self: { }) {}; "pandoc" = callPackage - ({ mkDerivation, aeson, aeson-pretty, attoparsec, base - , base64-bytestring, binary, blaze-html, blaze-markup, bytestring - , case-insensitive, citeproc, commonmark, commonmark-extensions - , commonmark-pandoc, connection, containers, data-default, deepseq - , Diff, directory, doclayout, doctemplates, emojis, exceptions - , file-embed, filepath, Glob, haddock-library, hslua - , hslua-module-path, hslua-module-system, hslua-module-text, HsYAML - , HTTP, http-client, http-client-tls, http-types, ipynb - , jira-wiki-markup, JuicyPixels, mtl, network, network-uri - , pandoc-types, parsec, process, QuickCheck, random, safe - , scientific, SHA, skylighting, skylighting-core, split, syb - , tagsoup, tasty, tasty-bench, tasty-golden, tasty-hunit, tasty-lua - , tasty-quickcheck, temporary, texmath, text, text-conversions - , time, unicode-transforms, unix, unordered-containers, xml - , xml-conduit, zip-archive, zlib - }: - mkDerivation { - pname = "pandoc"; - version = "2.13"; - sha256 = "1f725bbazqw81gfw3wn8ii8pb4qj5z49jibl1l4l972gsgfbmgrh"; - configureFlags = [ "-fhttps" "-f-trypandoc" ]; - isLibrary = true; - isExecutable = true; - enableSeparateDataOutput = true; - libraryHaskellDepends = [ - aeson aeson-pretty attoparsec base base64-bytestring binary - blaze-html blaze-markup bytestring case-insensitive citeproc - commonmark commonmark-extensions commonmark-pandoc connection - containers data-default deepseq directory doclayout doctemplates - emojis exceptions file-embed filepath Glob haddock-library hslua - hslua-module-path hslua-module-system hslua-module-text HsYAML HTTP - http-client http-client-tls http-types ipynb jira-wiki-markup - JuicyPixels mtl network network-uri pandoc-types parsec process - random safe scientific SHA skylighting skylighting-core split syb - tagsoup temporary texmath text text-conversions time - unicode-transforms unix unordered-containers xml xml-conduit - zip-archive zlib - ]; - executableHaskellDepends = [ base ]; - testHaskellDepends = [ - base bytestring containers Diff directory doctemplates exceptions - filepath Glob hslua mtl pandoc-types process QuickCheck tasty - tasty-golden tasty-hunit tasty-lua tasty-quickcheck text time xml - zip-archive - ]; - benchmarkHaskellDepends = [ - base bytestring containers deepseq mtl tasty-bench text time - ]; - postInstall = '' - mkdir -p $out/share/man/man1 - mv "man/"*.1 $out/share/man/man1/ - ''; - description = "Conversion between markup formats"; - license = lib.licenses.gpl2Plus; - maintainers = with lib.maintainers; [ peti ]; - }) {}; - - "pandoc_2_14_0_1" = callPackage ({ mkDerivation, aeson, aeson-pretty, array, attoparsec, base , base64-bytestring, binary, blaze-html, blaze-markup, bytestring , case-insensitive, citeproc, commonmark, commonmark-extensions @@ -194389,8 +194147,8 @@ self: { }: mkDerivation { pname = "pandoc"; - version = "2.14.0.1"; - sha256 = "0fyhmdd1qnf9z4k1m8mm4m1p4lvpirlxx78plglch5h4xqidibr3"; + version = "2.14.0.2"; + sha256 = "1jnckx29l6plg1zbkjdfj530djjl8zszwr54zsg0k0is4pcswa9f"; configureFlags = [ "-fhttps" "-f-trypandoc" ]; isLibrary = true; isExecutable = true; @@ -194425,7 +194183,6 @@ self: { ''; description = "Conversion between markup formats"; license = lib.licenses.gpl2Plus; - hydraPlatforms = lib.platforms.none; maintainers = with lib.maintainers; [ peti ]; }) {}; @@ -194484,70 +194241,31 @@ self: { }) {}; "pandoc-crossref" = callPackage - ({ mkDerivation, base, containers, data-accessor - , data-accessor-template, data-accessor-transformers, data-default - , deepseq, directory, filepath, gitrev, hspec, mtl, open-browser - , optparse-applicative, pandoc, pandoc-types, roman-numerals, syb - , template-haskell, temporary, text, utility-ht - }: - mkDerivation { - pname = "pandoc-crossref"; - version = "0.3.10.0"; - sha256 = "1yymm8y9hzkbjff7cn63qsvpfks1f1n741vfdiiga66kml8v0zdm"; - revision = "1"; - editedCabalFile = "0grjcp8r5fh41qnn3miw6bms3ml9v6n1rjb2yvimf1v69w61nlgq"; - isLibrary = true; - isExecutable = true; - enableSeparateDataOutput = true; - libraryHaskellDepends = [ - base containers data-accessor data-accessor-template - data-accessor-transformers data-default directory filepath mtl - pandoc pandoc-types roman-numerals syb template-haskell text - utility-ht - ]; - executableHaskellDepends = [ - base containers data-accessor data-accessor-template - data-accessor-transformers data-default deepseq directory filepath - gitrev mtl open-browser optparse-applicative pandoc pandoc-types - roman-numerals syb template-haskell temporary text utility-ht - ]; - testHaskellDepends = [ - base containers data-accessor data-accessor-template - data-accessor-transformers data-default directory filepath hspec - mtl pandoc pandoc-types roman-numerals syb template-haskell text - utility-ht - ]; - description = "Pandoc filter for cross-references"; - license = lib.licenses.gpl2Only; - }) {}; - - "pandoc-crossref_0_3_11_0" = callPackage - ({ mkDerivation, base, containers, criterion, data-accessor - , data-accessor-template, data-accessor-transformers, data-default - , deepseq, directory, filepath, gitrev, hspec, mtl, open-browser - , optparse-applicative, pandoc, pandoc-types, roman-numerals, syb - , template-haskell, temporary, text, utility-ht + ({ mkDerivation, base, containers, criterion, data-default, deepseq + , directory, filepath, gitrev, hspec, microlens, microlens-mtl + , microlens-th, mtl, open-browser, optparse-applicative, pandoc + , pandoc-types, roman-numerals, syb, template-haskell, temporary + , text, utility-ht }: mkDerivation { pname = "pandoc-crossref"; - version = "0.3.11.0"; - sha256 = "1czz54px5pv5a5ijxllz3nrq5s5k4rb05xb8r29drrnz13j45chk"; + version = "0.3.12.0"; + sha256 = "0y991lp6bgjiz67b1w6jywhwzwq5kf385pzl91s4g22lfnhwc7sz"; isLibrary = true; isExecutable = true; enableSeparateDataOutput = true; libraryHaskellDepends = [ - base containers data-accessor data-accessor-template - data-accessor-transformers data-default directory filepath mtl - pandoc pandoc-types roman-numerals syb template-haskell text - utility-ht + base containers data-default directory filepath microlens + microlens-mtl microlens-th mtl pandoc pandoc-types roman-numerals + syb template-haskell text utility-ht ]; executableHaskellDepends = [ base deepseq gitrev open-browser optparse-applicative pandoc pandoc-types template-haskell temporary text ]; testHaskellDepends = [ - base containers data-accessor data-default directory filepath hspec - mtl pandoc pandoc-types text + base containers data-default directory filepath hspec microlens mtl + pandoc pandoc-types text ]; benchmarkHaskellDepends = [ base criterion pandoc pandoc-types text @@ -194555,7 +194273,6 @@ self: { doHaddock = false; description = "Pandoc filter for cross-references"; license = lib.licenses.gpl2Only; - hydraPlatforms = lib.platforms.none; }) {}; "pandoc-csv2table" = callPackage @@ -197252,8 +196969,10 @@ self: { }: mkDerivation { pname = "path"; - version = "0.7.1"; - sha256 = "1z2gj4108827lb03f7cdqhijjgqjvv9glzrzfv96cxkwgi6y38jx"; + version = "0.8.0"; + sha256 = "0vzsa41q5sxs1ni72yv1vfpnc6r5mjdwnmdb6jrs6cszb2xlkjr4"; + revision = "1"; + editedCabalFile = "02vhx94mqapyigvayb6cj7p7snn354pb542n3qyvsm0gih52wlja"; libraryHaskellDepends = [ aeson base deepseq exceptions filepath hashable template-haskell text @@ -197266,7 +196985,7 @@ self: { license = lib.licenses.bsd3; }) {}; - "path_0_8_0" = callPackage + "path_0_9_0" = callPackage ({ mkDerivation, aeson, base, bytestring, deepseq, exceptions , filepath, genvalidity, genvalidity-hspec, genvalidity-property , hashable, hspec, mtl, QuickCheck, template-haskell, text @@ -197274,10 +196993,8 @@ self: { }: mkDerivation { pname = "path"; - version = "0.8.0"; - sha256 = "0vzsa41q5sxs1ni72yv1vfpnc6r5mjdwnmdb6jrs6cszb2xlkjr4"; - revision = "1"; - editedCabalFile = "02vhx94mqapyigvayb6cj7p7snn354pb542n3qyvsm0gih52wlja"; + version = "0.9.0"; + sha256 = "14h811rrydpiwi1rdi5wmcdlcq2qjld3iv92p4czqf08a7lxaz4g"; libraryHaskellDepends = [ aeson base deepseq exceptions filepath hashable template-haskell text @@ -197349,6 +197066,8 @@ self: { pname = "path-io"; version = "1.6.3"; sha256 = "1dnc48hf8x83p0jy05qi8j8gmfmsy50swnql9ssdv74lsryp615n"; + revision = "1"; + editedCabalFile = "0hzpwyxyj332mq09vgf06vfsga9b0q711fr52x3xswcmhvvsv60g"; libraryHaskellDepends = [ base containers directory dlist exceptions filepath path temporary time transformers unix-compat @@ -198708,8 +198427,8 @@ self: { ({ mkDerivation, base, leancheck }: mkDerivation { pname = "percent-format"; - version = "0.0.1"; - sha256 = "028c8rnv86mln9pdhb6w4i56n07hlslg69f3pmcjpb7ilr5scc3m"; + version = "0.0.2"; + sha256 = "0nlfva8ldvq169q76ng2f23bdnyzc6q8a7bq4lgwr9ypw96i503f"; libraryHaskellDepends = [ base ]; testHaskellDepends = [ base leancheck ]; description = "simple printf-style string formatting"; @@ -198730,21 +198449,20 @@ self: { }) {}; "perceptual-hash" = callPackage - ({ mkDerivation, base, containers, cpphs, criterion, deepseq - , filepath, hip, hspec, optparse-applicative, par-traverse - , primitive, stm, vector, vector-algorithms + ({ mkDerivation, base, bytestring, containers, cpphs, criterion + , deepseq, filepath, hip, hspec, JuicyPixels, optparse-applicative + , par-traverse, primitive, stm, vector, vector-algorithms, webp }: mkDerivation { pname = "perceptual-hash"; - version = "0.1.3.5"; - sha256 = "0f36sy9ixwbx55m3634lr0hrhllj68wv5jilzq0xik2171g3rx2p"; - revision = "1"; - editedCabalFile = "0s67w3sc480vrmdjr67y6gjyhfik6v2lrh99abcgj6ikgiwx2lbf"; + version = "0.1.4.2"; + sha256 = "08zb8060ixk67jhr9h74zix9m1svpigz5l4ii97qi88l1xdxfx36"; isLibrary = true; isExecutable = true; enableSeparateDataOutput = true; libraryHaskellDepends = [ - base hip primitive vector vector-algorithms + base bytestring hip JuicyPixels primitive vector vector-algorithms + webp ]; executableHaskellDepends = [ base containers filepath optparse-applicative par-traverse stm @@ -199284,6 +199002,43 @@ self: { maintainers = with lib.maintainers; [ psibi ]; }) {}; + "persistent_2_13_0_3" = callPackage + ({ mkDerivation, aeson, attoparsec, base, base64-bytestring + , blaze-html, bytestring, conduit, containers, criterion, deepseq + , fast-logger, file-embed, hspec, http-api-data, lift-type + , monad-logger, mtl, path-pieces, QuickCheck, quickcheck-instances + , resource-pool, resourcet, scientific, shakespeare, silently + , template-haskell, text, th-lift-instances, time, transformers + , unliftio, unliftio-core, unordered-containers, vector + }: + mkDerivation { + pname = "persistent"; + version = "2.13.0.3"; + sha256 = "0jlrkyy10cz6rq47r75q9l5ycyrdjwxs810x7v5ijrimdd9cv24d"; + libraryHaskellDepends = [ + aeson attoparsec base base64-bytestring blaze-html bytestring + conduit containers fast-logger http-api-data lift-type monad-logger + mtl path-pieces resource-pool resourcet scientific silently + template-haskell text th-lift-instances time transformers unliftio + unliftio-core unordered-containers vector + ]; + testHaskellDepends = [ + aeson attoparsec base base64-bytestring blaze-html bytestring + conduit containers fast-logger hspec http-api-data monad-logger mtl + path-pieces QuickCheck quickcheck-instances resource-pool resourcet + scientific shakespeare silently template-haskell text + th-lift-instances time transformers unliftio unliftio-core + unordered-containers vector + ]; + benchmarkHaskellDepends = [ + base criterion deepseq file-embed template-haskell text + ]; + description = "Type-safe, multi-backend data serialization"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + maintainers = with lib.maintainers; [ psibi ]; + }) {}; + "persistent-audit" = callPackage ({ mkDerivation, aeson, attoparsec, base, bytestring , getopt-generics, hashable, hspec, mongoDB, persistent @@ -199521,10 +199276,8 @@ self: { }: mkDerivation { pname = "persistent-mongoDB"; - version = "2.12.0.0"; - sha256 = "1s49d4c4kiqcblkap96wcrp3nc0179vpzbqp4fdibljq9ylzxmzg"; - revision = "1"; - editedCabalFile = "047riy3grn68jw99095qgqxvfs5bvxmcvmnz170nrqflrlr4l4dd"; + version = "2.13.0.0"; + sha256 = "0096fjyzgl788ciws0vb5bn5in8946bd12qrg8wz8dyq1xvilg8m"; libraryHaskellDepends = [ aeson base bson bytestring cereal conduit http-api-data mongoDB network path-pieces persistent resource-pool resourcet text time @@ -199714,6 +199467,40 @@ self: { license = lib.licenses.mit; }) {}; + "persistent-postgresql_2_13_0_3" = callPackage + ({ mkDerivation, aeson, attoparsec, base, blaze-builder, bytestring + , conduit, containers, fast-logger, hspec, hspec-expectations + , hspec-expectations-lifted, http-api-data, HUnit, monad-logger + , mtl, path-pieces, persistent, persistent-qq, persistent-test + , postgresql-libpq, postgresql-simple, QuickCheck + , quickcheck-instances, resource-pool, resourcet + , string-conversions, text, time, transformers, unliftio + , unliftio-core, unordered-containers, vector + }: + mkDerivation { + pname = "persistent-postgresql"; + version = "2.13.0.3"; + sha256 = "06f5yyv8bj3m4zpjwr1k66hkmh1gfy624rnq2g12sjrpz8nrax6j"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + aeson attoparsec base blaze-builder bytestring conduit containers + monad-logger mtl persistent postgresql-libpq postgresql-simple + resource-pool resourcet string-conversions text time transformers + unliftio-core + ]; + testHaskellDepends = [ + aeson base bytestring containers fast-logger hspec + hspec-expectations hspec-expectations-lifted http-api-data HUnit + monad-logger path-pieces persistent persistent-qq persistent-test + QuickCheck quickcheck-instances resourcet text time transformers + unliftio unliftio-core unordered-containers vector + ]; + description = "Backend for the persistent library using postgresql"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "persistent-protobuf" = callPackage ({ mkDerivation, base, bytestring, persistent, protocol-buffers , protocol-buffers-descriptor, template-haskell, text @@ -200273,6 +200060,7 @@ self: { description = "A postgresql-simple transaction monad"; license = lib.licenses.bsd3; hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "pgdl" = callPackage @@ -203800,8 +203588,8 @@ self: { }: mkDerivation { pname = "ploterific"; - version = "0.2.1.1"; - sha256 = "1i5rgbnvi7s5rq13kj4fnanzmalzh53rim0r3nxxa82i25nb1sfq"; + version = "0.2.1.2"; + sha256 = "1ywg09amxngan23c5724c5s2s79yhynqha6c5xivg1ls58nc7yk5"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -204758,6 +204546,8 @@ self: { ]; description = "Higher-order, low-boilerplate free monads"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "polysemy-RandomFu" = callPackage @@ -204789,8 +204579,8 @@ self: { }: mkDerivation { pname = "polysemy-chronos"; - version = "0.1.2.1"; - sha256 = "0b33an8swx97fg6196vvs0zic3zkhigxy6zi2r6pbrw9v8fgwkqa"; + version = "0.1.2.2"; + sha256 = "15vi5x099r38jk3lnynpi8my4fp06fkzwvrxgpvxdfp9ilg2al6h"; libraryHaskellDepends = [ aeson base chronos containers polysemy polysemy-plugin polysemy-time relude text @@ -204801,6 +204591,7 @@ self: { ]; description = "Polysemy effect for chronos"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-conc" = callPackage @@ -204824,6 +204615,7 @@ self: { ]; description = "Polysemy Effects for Concurrency"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-extra" = callPackage @@ -204855,6 +204647,7 @@ self: { ]; description = "Low level filesystem operations for polysemy"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-fskvstore" = callPackage @@ -204900,6 +204693,7 @@ self: { ]; description = "Polysemy effect for http-client"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-kvstore-jsonfile" = callPackage @@ -204940,6 +204734,7 @@ self: { ]; description = "Polysemy effects for logging"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-log-co" = callPackage @@ -204984,6 +204779,7 @@ self: { ]; description = "polysemy-log interpreter for di"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-methodology" = callPackage @@ -205032,14 +204828,15 @@ self: { testToolDepends = [ hspec-discover ]; description = "Mocking framework for polysemy effects"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-optics" = callPackage ({ mkDerivation, base, optics, polysemy, polysemy-zoo }: mkDerivation { pname = "polysemy-optics"; - version = "0.1.0.0"; - sha256 = "1ym2da08wy5pbdijrvn769w644dyma8hc010f8phqjnpkhq4j0z5"; + version = "0.1.0.1"; + sha256 = "1503qfi0kp8p4h723nkwidgxp46wmfxi93vsyvdp6i7zwvg09yy2"; libraryHaskellDepends = [ base optics polysemy polysemy-zoo ]; description = "Optics for Polysemy"; license = lib.licenses.bsd2; @@ -205083,6 +204880,7 @@ self: { testToolDepends = [ hspec-discover ]; description = "Disambiguate obvious uses of effects"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-resume" = callPackage @@ -205100,6 +204898,7 @@ self: { ]; description = "Polysemy error tracking"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-test" = callPackage @@ -205109,8 +204908,8 @@ self: { }: mkDerivation { pname = "polysemy-test"; - version = "0.3.1.2"; - sha256 = "1gzngz8mspq0n6hwhvqah8szjrhf65wigadrh3l863j2iswsxq2r"; + version = "0.3.1.3"; + sha256 = "0m6zczyw4shgrpfyz23m9n3626mxcfqj0sdfcrnlkz7n0k0k0470"; enableSeparateDataOutput = true; libraryHaskellDepends = [ base containers either hedgehog path path-io polysemy @@ -205124,6 +204923,7 @@ self: { ]; description = "Polysemy effects for testing"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-time" = callPackage @@ -205134,8 +204934,8 @@ self: { }: mkDerivation { pname = "polysemy-time"; - version = "0.1.2.1"; - sha256 = "16b0wj6f9pcxq5in53yh2p52pj1w358f412rpvyhz376ak7z6h71"; + version = "0.1.2.2"; + sha256 = "1q08dwyp4v28s31gfq2ha8irfhczxzhg9c96wps6iz5xl7cir9va"; libraryHaskellDepends = [ aeson base composition containers data-default either polysemy relude string-interpolate template-haskell text time torsor @@ -205147,6 +204947,7 @@ self: { ]; description = "Polysemy effect for time"; license = "BSD-2-Clause-Patent"; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-video" = callPackage @@ -205161,6 +204962,7 @@ self: { base formatting path path-utils polysemy text turtle ]; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-vinyl" = callPackage @@ -205194,6 +204996,7 @@ self: { ]; description = "Start web servers from within a Polysemy effect stack"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; }) {}; "polysemy-zoo" = callPackage @@ -206140,6 +205943,8 @@ self: { ]; description = "Sleep tracker for X11, using XScreenSaver extension and manual input"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "possible" = callPackage @@ -212593,8 +212398,8 @@ self: { }: mkDerivation { pname = "pusher-http-haskell"; - version = "2.1.0.2"; - sha256 = "0xrmjdika7y2hkp67kzh7xqc3v9j6db1rq2ksih1j9yypa1iihka"; + version = "2.1.0.3"; + sha256 = "1v9mibzvj5qfx9b5wgg9ragqd54xqmxb20afnmnw5c5yiglzazxd"; libraryHaskellDepends = [ aeson base base16-bytestring bytestring cryptonite hashable http-client http-client-tls http-types memory text time @@ -215035,10 +214840,8 @@ self: { ({ mkDerivation, base, HUnit, lens, profunctors }: mkDerivation { pname = "radian"; - version = "0.1"; - sha256 = "150vb9wk73avh8rrsz92y1fcwlm30w4k23lbdncb8ivinqhdi4pv"; - revision = "1"; - editedCabalFile = "1mkk17rrg2z6s1qkzz7qcm6q6qvgmcmvii9rzjzgn73m1x1l5rim"; + version = "0.2"; + sha256 = "18kgxwlfrd70z43z8sg50hz3xhr2iaa1cnc3gc0dz9g8195w8w6q"; libraryHaskellDepends = [ base profunctors ]; testHaskellDepends = [ base HUnit lens ]; description = "Isomorphisms for measurements that use radians"; @@ -218685,6 +218488,8 @@ self: { pname = "reflex"; version = "0.8.1.0"; sha256 = "0p27dj7fckkvw9li69whcfrv1cd59kkp6qbvfmndzx8fbh44ggbp"; + revision = "1"; + editedCabalFile = "07bvrcfbnz1pv15cmk4f780aiw72gbhsji20kqyk8kk7d2jwpcab"; libraryHaskellDepends = [ base bifunctors comonad constraints-extras containers data-default dependent-map dependent-sum exception-transformers haskell-src-exts @@ -219042,6 +218847,8 @@ self: { pname = "reflex-fsnotify"; version = "0.2.1.2"; sha256 = "1g5zm12ypqr0agrgmbyglhh5f9p933hba2dismbyywsgdmn1i9bl"; + revision = "1"; + editedCabalFile = "1hpi0wnvif72n3mfnrypa3psl82wfw60l36cn2j8fdp7lrvzxa88"; libraryHaskellDepends = [ base containers directory filepath fsnotify reflex ]; @@ -219290,6 +219097,8 @@ self: { pname = "reflex-process"; version = "0.3.1.0"; sha256 = "1z86h7wkzg69d6kw0y37pzr4ldpg9qkl8wx5mw7r1h82isb9wgbl"; + revision = "1"; + editedCabalFile = "16vwrz7amccy8j2wn9146j8lif35f7ycpssd0p649ha746s7hrf4"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -219373,10 +219182,8 @@ self: { }: mkDerivation { pname = "reflex-vty"; - version = "0.1.4.1"; - sha256 = "0hv2h1pzz808bg2bvignb3d2wma1aw96zdf545f9p01vjr1b656a"; - revision = "1"; - editedCabalFile = "0gpfbpzcg516kghsgwc4gnbp217p6phw9bh1qhlkzd0ji35gdibm"; + version = "0.1.4.2"; + sha256 = "07fjw95w8ahllbs1zp215apck01abcrv4sshid8z6972g7n7392r"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -220593,6 +220400,32 @@ self: { license = lib.licenses.mit; }) {}; + "rel8" = callPackage + ({ mkDerivation, aeson, base, bytestring, case-insensitive + , containers, contravariant, hasql, hedgehog, lifted-base + , monad-control, opaleye, profunctors, scientific, semialign + , semigroupoids, tasty, tasty-hedgehog, text, these, time + , tmp-postgres, transformers, uuid + }: + mkDerivation { + pname = "rel8"; + version = "1.0.0.1"; + sha256 = "1kwvib3chqw5xrz6v7z0jy75mgyhqqb755xzn02zz2hvjwfcqc6v"; + libraryHaskellDepends = [ + aeson base bytestring case-insensitive contravariant hasql opaleye + profunctors scientific semialign semigroupoids text these time + transformers uuid + ]; + testHaskellDepends = [ + base bytestring case-insensitive containers hasql hedgehog + lifted-base monad-control scientific tasty tasty-hedgehog text time + tmp-postgres uuid + ]; + description = "Hey! Hey! Can u rel8?"; + license = lib.licenses.bsd3; + maintainers = with lib.maintainers; [ sternenseemann ]; + }) {}; + "relacion" = callPackage ({ mkDerivation, array, base, containers }: mkDerivation { @@ -223348,27 +223181,27 @@ self: { ({ mkDerivation, aeson, async, attoparsec, base, bifunctors, binary , blaze-builder, bytestring, containers, criterion , data-default-class, deepseq, enclosed-exceptions, exceptions - , hashable, HUnit, mersenne-random-pure64, monad-control, mtl - , network, process, protocol-buffers, pureMD5, QuickCheck, random + , hashable, HUnit, mersenne-random-pure64, microlens, monad-control + , mtl, network, process, proto-lens, pureMD5, QuickCheck, random , resource-pool, riak-protobuf, semigroups, stm, tasty, tasty-hunit , tasty-quickcheck, template-haskell, text, time, transformers , transformers-base, unordered-containers, vector, yaml }: mkDerivation { pname = "riak"; - version = "1.1.2.6"; - sha256 = "0dialr56k5406zav54hk4lx6dr9yisv8yq0hrjjga5my08ga5v4y"; + version = "1.2.0.0"; + sha256 = "0dbdw7jxs2sklj32m7qv8nf6g3dsax2pr8qbkm72iy32yryx6ji0"; libraryHaskellDepends = [ aeson async attoparsec base bifunctors binary blaze-builder bytestring containers data-default-class deepseq enclosed-exceptions exceptions hashable mersenne-random-pure64 - monad-control network protocol-buffers pureMD5 random resource-pool + monad-control network proto-lens pureMD5 random resource-pool riak-protobuf semigroups stm text time transformers transformers-base unordered-containers vector ]; testHaskellDepends = [ - aeson base bytestring containers data-default-class HUnit mtl - process QuickCheck riak-protobuf semigroups tasty tasty-hunit + aeson base bytestring containers data-default-class HUnit microlens + mtl process QuickCheck riak-protobuf semigroups tasty tasty-hunit tasty-quickcheck template-haskell text yaml ]; benchmarkHaskellDepends = [ base bytestring criterion semigroups ]; @@ -223378,16 +223211,12 @@ self: { }) {}; "riak-protobuf" = callPackage - ({ mkDerivation, array, base, parsec, protocol-buffers - , protocol-buffers-descriptor - }: + ({ mkDerivation, base, proto-lens, proto-lens-runtime }: mkDerivation { pname = "riak-protobuf"; - version = "0.24.0.0"; - sha256 = "175sww7s8r1brl3iz2m3vxx8ffk059ciyvzxqfn47cwf8yljw10s"; - libraryHaskellDepends = [ - array base parsec protocol-buffers protocol-buffers-descriptor - ]; + version = "0.25.0.0"; + sha256 = "1r4rhgdwr2pnr01szdci8l0nmf0fd1vbj8a323lj946rj472kxri"; + libraryHaskellDepends = [ base proto-lens proto-lens-runtime ]; description = "Haskell types for the Riak protocol buffer API"; license = "unknown"; hydraPlatforms = lib.platforms.none; @@ -223399,8 +223228,8 @@ self: { }: mkDerivation { pname = "riak-protobuf-lens"; - version = "0.24.0.0"; - sha256 = "1qmpa4vg5mxkx804c2bl6dnsgwrvv9hj62a208ns2smps6fnbndh"; + version = "0.25.0.0"; + sha256 = "1znqdz51aaripzz1qxkfpwcmrygg462kd1vf47v1gm6rwk55ianl"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -223784,6 +223613,20 @@ self: { license = lib.licenses.mit; }) {}; + "rio-app" = callPackage + ({ mkDerivation, base, optparse-simple, resourcet, rio }: + mkDerivation { + pname = "rio-app"; + version = "0.1.0.0"; + sha256 = "0ra76ssnffykdjqy56zqf30nbj9y1bf01897kflj0y68ri7vzsva"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ base resourcet rio ]; + executableHaskellDepends = [ base optparse-simple resourcet rio ]; + description = "Generic App type for rio"; + license = lib.licenses.bsd3; + }) {}; + "rio-orphans" = callPackage ({ mkDerivation, base, exceptions, fast-logger, hspec , monad-control, monad-logger, resourcet, rio, transformers-base @@ -225368,38 +225211,6 @@ self: { "rp-tree" = callPackage ({ mkDerivation, base, benchpress, boxes, bytestring, conduit - , containers, deepseq, hspec, microlens, microlens-th, mtl - , psqueues, QuickCheck, serialise, splitmix, splitmix-distributions - , text, transformers, vector, vector-algorithms - }: - mkDerivation { - pname = "rp-tree"; - version = "0.4"; - sha256 = "1pni4pmvk2cb3x98lma0isbn8vh651pyql0dmjmg4nvr8i471iqf"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - base boxes bytestring conduit containers deepseq microlens - microlens-th mtl psqueues serialise splitmix splitmix-distributions - text transformers vector vector-algorithms - ]; - executableHaskellDepends = [ - base conduit containers splitmix splitmix-distributions - transformers vector - ]; - testHaskellDepends = [ - base conduit hspec QuickCheck splitmix-distributions - ]; - benchmarkHaskellDepends = [ - base benchpress conduit deepseq splitmix splitmix-distributions - transformers vector - ]; - description = "Random projection trees"; - license = lib.licenses.bsd3; - }) {}; - - "rp-tree_0_6" = callPackage - ({ mkDerivation, base, benchpress, boxes, bytestring, conduit , containers, deepseq, heaps, hspec, mtl, QuickCheck, serialise , splitmix, splitmix-distributions, text, transformers, vector , vector-algorithms @@ -225428,7 +225239,6 @@ self: { ]; description = "Random projection trees"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "rpc" = callPackage @@ -225542,6 +225352,25 @@ self: { broken = true; }) {}; + "rrb-vector" = callPackage + ({ mkDerivation, base, deepseq, gauge, hspec, indexed-traversable + , primitive, QuickCheck + }: + mkDerivation { + pname = "rrb-vector"; + version = "0.1.0.0"; + sha256 = "1kn4ygi0jrx0a6s6cbfxx60r2vqgzrqflm5yaffjlwb55jf88m8i"; + revision = "1"; + editedCabalFile = "1ydx0mxkqfjdgq9rqg2bzn5rqc0jdn8f40d4pa9yg0l00kjl4kcz"; + libraryHaskellDepends = [ + base deepseq indexed-traversable primitive + ]; + testHaskellDepends = [ base hspec QuickCheck ]; + benchmarkHaskellDepends = [ base gauge primitive ]; + description = "Efficient RRB-Vectors"; + license = lib.licenses.bsd3; + }) {}; + "rrule" = callPackage ({ mkDerivation, base, hspec, megaparsec, parser-combinators, text , time @@ -227452,8 +227281,8 @@ self: { }: mkDerivation { pname = "sandwich"; - version = "0.1.0.7"; - sha256 = "1ndw054vp2ygxd86whqbsdvrbv49khh1a6ia9zlqzx3gjbhqpxxi"; + version = "0.1.0.8"; + sha256 = "0b0k01r85wiaxn264ax3xva8a2gy7vv9qnig2fxyr42zdkm289jy"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -231405,8 +231234,8 @@ self: { }: mkDerivation { pname = "sequenceTools"; - version = "1.4.0.5"; - sha256 = "06wi43di0bja83iympx8pvka4zfwc4yyaw7chrddvxasnxqi369q"; + version = "1.5.0"; + sha256 = "0w3pk38nr0c6z0a7zpnh0kcdm7wpx7jcr0lmml56hab40filsh6c"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -231871,6 +231700,8 @@ self: { testToolDepends = [ hspec-discover ]; description = "servant-docs/servant-auth compatibility"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "servant-auth-hmac" = callPackage @@ -232721,6 +232552,17 @@ self: { license = lib.licenses.bsd3; }) {}; + "servant-gdp" = callPackage + ({ mkDerivation, aeson, base, gdp, servant-server, text }: + mkDerivation { + pname = "servant-gdp"; + version = "0.0.1.2"; + sha256 = "1ihj1dz3cx56c4gc31ixichl9gr64llhfpw60a4p9jr5dcqk7qll"; + libraryHaskellDepends = [ aeson base gdp servant-server text ]; + description = "Use Servant and GDP together to create expressive web API types"; + license = lib.licenses.bsd3; + }) {}; + "servant-generate" = callPackage ({ mkDerivation, base, servant, servant-server }: mkDerivation { @@ -234209,6 +234051,85 @@ self: { license = lib.licenses.mit; }) {}; + "servant-util" = callPackage + ({ mkDerivation, aeson, autoexporter, base, containers + , data-default, fmt, hspec, hspec-discover, hspec-expectations + , http-client, http-types, insert-ordered-containers, lens + , megaparsec, mtl, pretty-terminal, QuickCheck, reflection + , regex-posix, safe-exceptions, servant, servant-client + , servant-client-core, servant-server, servant-swagger + , servant-swagger-ui, servant-swagger-ui-core, swagger2, text + , text-format, time, universum, wai, wai-extra, warp + }: + mkDerivation { + pname = "servant-util"; + version = "0.1.0.1"; + sha256 = "0idb3h2482hhrj9yvphdb74wxyr2y3rzfql2q2qn2a724b1bmax4"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + aeson base containers data-default fmt http-types + insert-ordered-containers lens megaparsec mtl pretty-terminal + QuickCheck reflection regex-posix safe-exceptions servant + servant-client servant-client-core servant-server servant-swagger + servant-swagger-ui servant-swagger-ui-core swagger2 text + text-format time universum wai + ]; + libraryToolDepends = [ autoexporter ]; + executableHaskellDepends = [ + aeson base containers data-default fmt http-types + insert-ordered-containers lens megaparsec mtl pretty-terminal + QuickCheck reflection regex-posix safe-exceptions servant + servant-client servant-client-core servant-server servant-swagger + servant-swagger-ui servant-swagger-ui-core swagger2 text + text-format time universum wai wai-extra warp + ]; + testHaskellDepends = [ + aeson base containers data-default fmt hspec hspec-expectations + http-client http-types insert-ordered-containers lens megaparsec + mtl pretty-terminal QuickCheck reflection regex-posix + safe-exceptions servant servant-client servant-client-core + servant-server servant-swagger servant-swagger-ui + servant-swagger-ui-core swagger2 text text-format time universum + wai warp + ]; + testToolDepends = [ hspec-discover ]; + description = "Servant servers utilities"; + license = lib.licenses.mpl20; + }) {}; + + "servant-util-beam-pg" = callPackage + ({ mkDerivation, autoexporter, base, beam-core, beam-postgres + , containers, hspec, hspec-discover, QuickCheck, servant + , servant-client, servant-client-core, servant-server, servant-util + , text, universum + }: + mkDerivation { + pname = "servant-util-beam-pg"; + version = "0.1.0.1"; + sha256 = "1qhs2bvlka3qm4kv64m5p5ldcd9nfgzs0za9vqy2z9fmdhzihxz1"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + base beam-core beam-postgres containers servant servant-client + servant-client-core servant-server servant-util text universum + ]; + libraryToolDepends = [ autoexporter ]; + executableHaskellDepends = [ + base beam-core beam-postgres containers servant servant-client + servant-client-core servant-server servant-util text universum + ]; + testHaskellDepends = [ + base beam-core beam-postgres containers hspec QuickCheck servant + servant-client servant-client-core servant-server servant-util text + universum + ]; + testToolDepends = [ hspec-discover ]; + description = "Implementation of servant-util primitives for beam-postgres"; + license = lib.licenses.mpl20; + hydraPlatforms = lib.platforms.none; + }) {}; + "servant-validate" = callPackage ({ mkDerivation, base, containers, hspec, servant , should-not-typecheck, text @@ -236714,6 +236635,8 @@ self: { testHaskellDepends = [ base doctest ]; description = "Link shortcuts for use in text markup"; license = lib.licenses.mpl20; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "shorten-strings" = callPackage @@ -239344,6 +239267,28 @@ self: { license = lib.licenses.gpl2Only; }) {}; + "skylighting_0_10_5_2" = callPackage + ({ mkDerivation, base, binary, blaze-html, bytestring, containers + , pretty-show, skylighting-core, text + }: + mkDerivation { + pname = "skylighting"; + version = "0.10.5.2"; + sha256 = "152ywiy7h04xjy0fdl571jwahl6c9350isqbm4p0na4cjd9cczzh"; + configureFlags = [ "-fexecutable" ]; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + base binary containers skylighting-core + ]; + executableHaskellDepends = [ + base blaze-html bytestring containers pretty-show text + ]; + description = "syntax highlighting library"; + license = lib.licenses.gpl2Only; + hydraPlatforms = lib.platforms.none; + }) {}; + "skylighting-core" = callPackage ({ mkDerivation, aeson, ansi-terminal, attoparsec, base , base64-bytestring, binary, blaze-html, bytestring @@ -239375,6 +239320,38 @@ self: { license = lib.licenses.bsd3; }) {}; + "skylighting-core_0_10_5_2" = callPackage + ({ mkDerivation, aeson, ansi-terminal, attoparsec, base + , base64-bytestring, binary, blaze-html, bytestring + , case-insensitive, colour, containers, criterion, Diff, directory + , filepath, mtl, pretty-show, QuickCheck, safe, tasty, tasty-golden + , tasty-hunit, tasty-quickcheck, text, transformers, utf8-string + , xml-conduit + }: + mkDerivation { + pname = "skylighting-core"; + version = "0.10.5.2"; + sha256 = "0bskci0gng6nf324wna9ss4xbr1mwjkgk3mlfkr96r1m3wza5g3d"; + isLibrary = true; + isExecutable = true; + libraryHaskellDepends = [ + aeson ansi-terminal attoparsec base base64-bytestring binary + blaze-html bytestring case-insensitive colour containers directory + filepath mtl safe text transformers utf8-string xml-conduit + ]; + testHaskellDepends = [ + aeson base bytestring containers Diff directory filepath + pretty-show QuickCheck tasty tasty-golden tasty-hunit + tasty-quickcheck text + ]; + benchmarkHaskellDepends = [ + base containers criterion directory filepath text + ]; + description = "syntax highlighting library"; + license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + }) {}; + "skylighting-extensions" = callPackage ({ mkDerivation, base, containers, skylighting, skylighting-modding , text @@ -239917,30 +239894,8 @@ self: { }: mkDerivation { pname = "slynx"; - version = "0.5.0.2"; - sha256 = "0qpw3h1lbz299gb2jdcsj7svhxsi9icqaws8xpik58a3hb0r8icb"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - attoparsec base bytestring containers elynx-markov elynx-seq - elynx-tools elynx-tree hmatrix monad-logger mwc-random - optparse-applicative statistics text transformers vector - ]; - executableHaskellDepends = [ base ]; - description = "Handle molecular sequences"; - license = lib.licenses.gpl3Plus; - }) {}; - - "slynx_0_5_1_0" = callPackage - ({ mkDerivation, attoparsec, base, bytestring, containers - , elynx-markov, elynx-seq, elynx-tools, elynx-tree, hmatrix - , monad-logger, mwc-random, optparse-applicative, statistics, text - , transformers, vector - }: - mkDerivation { - pname = "slynx"; - version = "0.5.1.0"; - sha256 = "14wg6ws065wz0h8nid3w0bpspanyfarc2c3gs93225ismmbjk1ng"; + version = "0.5.1.1"; + sha256 = "1qj68fl98j0l83iny0wcdjmc80qnjc0dzkc5n1q3zl10wl10c8mc"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -239951,7 +239906,6 @@ self: { executableHaskellDepends = [ base ]; description = "Handle molecular sequences"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "small-bytearray-builder" = callPackage @@ -241366,22 +241320,21 @@ self: { "snaplet-customauth" = callPackage ({ mkDerivation, aeson, base, base64-bytestring, binary - , binary-orphans, bytestring, configurator, containers, errors - , heist, hoauth2, http-client, http-client-tls, lens, map-syntax - , mtl, random, snap, snap-core, text, time, transformers - , unordered-containers, uri-bytestring, xmlhtml + , binary-instances, bytestring, bytestring-show, configurator + , containers, errors, heist, hoauth2, http-client, http-client-tls + , lens, map-syntax, mtl, random, snap, snap-core, text, time + , transformers, unordered-containers, uri-bytestring, xmlhtml }: mkDerivation { pname = "snaplet-customauth"; - version = "0.1.2"; - sha256 = "0y1a8c9j1q1pzby5v4ajnafm6dr9fvxvvkiynvscyjsf73gp2myb"; - revision = "2"; - editedCabalFile = "00wa07aqsyp1q8xrhi2xglwqwzm20qq0pxfb353idsja2qbvynfj"; + version = "0.2"; + sha256 = "10brxk6fpblbc58wjfhp3frx6r4d13iqz704v804r2hhsj35rkfz"; libraryHaskellDepends = [ - aeson base base64-bytestring binary binary-orphans bytestring - configurator containers errors heist hoauth2 http-client - http-client-tls lens map-syntax mtl random snap snap-core text time - transformers unordered-containers uri-bytestring xmlhtml + aeson base base64-bytestring binary binary-instances bytestring + bytestring-show configurator containers errors heist hoauth2 + http-client http-client-tls lens map-syntax mtl random snap + snap-core text time transformers unordered-containers + uri-bytestring xmlhtml ]; description = "Alternate authentication snaplet"; license = lib.licenses.bsd3; @@ -243641,6 +243594,8 @@ self: { ]; description = "A unix-style (read from stdin, write to stdout) global hotkey daemon"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "spata" = callPackage @@ -243868,8 +243823,8 @@ self: { ({ mkDerivation, base, cmdargs, containers, express, leancheck }: mkDerivation { pname = "speculate"; - version = "0.4.8"; - sha256 = "1xrrd1r4sbhvahdd3k9xnh8w9mmk4zh738q9blrjnvnd560wybp4"; + version = "0.4.10"; + sha256 = "05yypi40k5ijml8zbv195pfl5xa1l5cz4sx5mz721jr6dvag6jn8"; libraryHaskellDepends = [ base cmdargs containers express leancheck ]; @@ -245343,8 +245298,8 @@ self: { ({ mkDerivation, base, ghc-prim }: mkDerivation { pname = "stable-marriage"; - version = "0.2.1.0"; - sha256 = "1dv4333an20mlhmsxhaldjcj54pnkjvp7zpiasd6shii5d4cn0z1"; + version = "0.2.1.1"; + sha256 = "1ddmd7xk8a8a2baahnrn7gaj3ckn27f3hlcrimgi7m03kp00am17"; libraryHaskellDepends = [ base ghc-prim ]; testHaskellDepends = [ base ghc-prim ]; description = "algorithms around stable marriage"; @@ -249075,6 +249030,8 @@ self: { pname = "streamly-fsnotify"; version = "1.1.1.0"; sha256 = "1xcw4rsrysh96d91wjmyzb5s7cls3rf0ilpv8dn525iqzv11fl3l"; + revision = "1"; + editedCabalFile = "0lcpps69dk4xr4wd1z5zpykvsfqrd0jlqx87rqbzjndgrw9xh685"; libraryHaskellDepends = [ base filepath fsnotify semirings streamly text time ]; @@ -250125,6 +250082,8 @@ self: { ]; description = "Stripe-Library"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "strips" = callPackage @@ -250536,6 +250495,7 @@ self: { ]; description = "Apply CSS styles to a document tree"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; }) {}; "stylized" = callPackage @@ -251974,31 +251934,6 @@ self: { }: mkDerivation { pname = "swish"; - version = "0.10.0.4"; - sha256 = "0rad5rx8hxh0ay4q0lfbn4jggvl3wf3chhjf34rpppzdd6b7r75m"; - isLibrary = true; - isExecutable = true; - enableSeparateDataOutput = true; - libraryHaskellDepends = [ - base containers directory filepath hashable intern mtl network-uri - old-locale polyparse text time - ]; - executableHaskellDepends = [ base ]; - testHaskellDepends = [ - base containers hashable HUnit network-uri old-locale semigroups - test-framework test-framework-hunit text time - ]; - description = "A semantic web toolkit"; - license = lib.licenses.lgpl21Only; - }) {}; - - "swish_0_10_0_5" = callPackage - ({ mkDerivation, base, containers, directory, filepath, hashable - , HUnit, intern, mtl, network-uri, old-locale, polyparse - , semigroups, test-framework, test-framework-hunit, text, time - }: - mkDerivation { - pname = "swish"; version = "0.10.0.5"; sha256 = "0cf3aba585hnlaamwfxy9mfp8mjanza0zgp27gi2y66f79hcpq2q"; isLibrary = true; @@ -252015,7 +251950,6 @@ self: { ]; description = "A semantic web toolkit"; license = lib.licenses.lgpl21Only; - hydraPlatforms = lib.platforms.none; }) {}; "swiss-ephemeris" = callPackage @@ -252097,6 +252031,8 @@ self: { ]; description = "A simple web server for serving directories"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "sxml" = callPackage @@ -252195,6 +252131,33 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; + "sydtest_0_3_0_1" = callPackage + ({ mkDerivation, async, base, bytestring, containers, Diff, dlist + , envparse, filepath, MonadRandom, mtl, optparse-applicative, path + , path-io, pretty-show, QuickCheck, quickcheck-io, random-shuffle + , safe, safe-coloured-text, safe-coloured-text-terminfo, split, stm + , sydtest-discover, text, yaml, yamlparse-applicative + }: + mkDerivation { + pname = "sydtest"; + version = "0.3.0.1"; + sha256 = "0ddbjs2p2vzmzadggyvdpknmcw935jmj2m9nxki2apc9ciq6skig"; + libraryHaskellDepends = [ + async base bytestring containers Diff dlist envparse filepath + MonadRandom mtl optparse-applicative path path-io pretty-show + QuickCheck quickcheck-io random-shuffle safe safe-coloured-text + safe-coloured-text-terminfo split text yaml yamlparse-applicative + ]; + testHaskellDepends = [ + base bytestring path path-io QuickCheck safe-coloured-text + safe-coloured-text-terminfo stm text + ]; + testToolDepends = [ sydtest-discover ]; + description = "A modern testing framework for Haskell with good defaults and advanced testing features"; + license = "unknown"; + hydraPlatforms = lib.platforms.none; + }) {}; + "sydtest-aeson" = callPackage ({ mkDerivation, aeson, aeson-pretty, base, bytestring, path , path-io, sydtest, sydtest-discover, text @@ -252310,18 +252273,39 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; + "sydtest-persistent" = callPackage + ({ mkDerivation, base, monad-logger, mtl, persistent + , persistent-sqlite, persistent-template, sydtest, sydtest-discover + }: + mkDerivation { + pname = "sydtest-persistent"; + version = "0.0.0.0"; + sha256 = "1r9mzjrffncl39d9q4kcwjwyv7srf08qnq65l8lvncrjci9fdc0i"; + libraryHaskellDepends = [ + base monad-logger mtl persistent persistent-template sydtest + ]; + testHaskellDepends = [ + base monad-logger persistent persistent-sqlite persistent-template + sydtest + ]; + testToolDepends = [ sydtest-discover ]; + description = "A persistent companion library for sydtest"; + license = "unknown"; + hydraPlatforms = lib.platforms.none; + }) {}; + "sydtest-persistent-postgresql" = callPackage ({ mkDerivation, base, monad-logger, mtl, persistent , persistent-postgresql, persistent-template, sydtest - , sydtest-discover, tmp-postgres + , sydtest-discover, sydtest-persistent, tmp-postgres }: mkDerivation { pname = "sydtest-persistent-postgresql"; - version = "0.1.0.0"; - sha256 = "1g669w4rcjd7pnf6hrcc5lb6li30m9fdkrchm00bmg1350kxmnmp"; + version = "0.2.0.0"; + sha256 = "0c3f9m3d7nryb2xvfp7zrqqi9136mgf89ccwg8vlaapnx1bqap43"; libraryHaskellDepends = [ base monad-logger mtl persistent persistent-postgresql sydtest - tmp-postgres + sydtest-persistent tmp-postgres ]; testHaskellDepends = [ base persistent persistent-postgresql persistent-template sydtest @@ -252353,6 +252337,28 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; + "sydtest-persistent-sqlite_0_2_0_0" = callPackage + ({ mkDerivation, base, monad-logger, mtl, persistent + , persistent-sqlite, persistent-template, sydtest, sydtest-discover + , sydtest-persistent + }: + mkDerivation { + pname = "sydtest-persistent-sqlite"; + version = "0.2.0.0"; + sha256 = "1l17n6hgc64ngjfdgg6c1zhnlg6ks9bvb7hbv5yf454bhbm6p83s"; + libraryHaskellDepends = [ + base monad-logger mtl persistent persistent-sqlite + persistent-template sydtest sydtest-persistent + ]; + testHaskellDepends = [ + base persistent persistent-sqlite persistent-template sydtest + ]; + testToolDepends = [ sydtest-discover ]; + description = "A persistent-sqlite companion library for sydtest"; + license = "unknown"; + hydraPlatforms = lib.platforms.none; + }) {}; + "sydtest-process" = callPackage ({ mkDerivation, base, bytestring, process, sydtest , sydtest-discover @@ -252410,6 +252416,27 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; + "sydtest-servant_0_2_0_0" = callPackage + ({ mkDerivation, base, http-client, servant, servant-client + , servant-server, stm, sydtest, sydtest-discover, sydtest-wai + }: + mkDerivation { + pname = "sydtest-servant"; + version = "0.2.0.0"; + sha256 = "063bjik3yx7wbawdw1x4yw8ba8k83bq2xysczkl3mxqhj4c0ngx9"; + libraryHaskellDepends = [ + base http-client servant servant-client servant-server sydtest + sydtest-wai + ]; + testHaskellDepends = [ + base servant servant-client servant-server stm sydtest + ]; + testToolDepends = [ sydtest-discover ]; + description = "A servant companion library for sydtest"; + license = "unknown"; + hydraPlatforms = lib.platforms.none; + }) {}; + "sydtest-typed-process" = callPackage ({ mkDerivation, base, bytestring, sydtest, sydtest-discover , typed-process @@ -252448,6 +252475,28 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; + "sydtest-wai_0_2_0_0" = callPackage + ({ mkDerivation, base, bytestring, case-insensitive, http-client + , http-types, mtl, network, pretty-show, stm, sydtest + , sydtest-discover, text, time, wai, warp + }: + mkDerivation { + pname = "sydtest-wai"; + version = "0.2.0.0"; + sha256 = "1zyhgwi8vhjg7mahp98fjgvkhqvh6zwfw3pmhwk57raavzsg2ksb"; + libraryHaskellDepends = [ + base bytestring case-insensitive http-client http-types mtl network + pretty-show sydtest text time wai warp + ]; + testHaskellDepends = [ + base http-client http-types stm sydtest wai + ]; + testToolDepends = [ sydtest-discover ]; + description = "A wai companion library for sydtest"; + license = "unknown"; + hydraPlatforms = lib.platforms.none; + }) {}; + "sydtest-yesod" = callPackage ({ mkDerivation, base, blaze-builder, bytestring, case-insensitive , conduit, containers, cookie, exceptions, http-client, http-types @@ -252476,6 +252525,34 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; + "sydtest-yesod_0_2_0_1" = callPackage + ({ mkDerivation, base, blaze-builder, bytestring, case-insensitive + , conduit, containers, cookie, exceptions, http-client, http-types + , monad-logger, mtl, network, persistent, persistent-sqlite + , persistent-template, pretty-show, QuickCheck, resourcet, sydtest + , sydtest-discover, sydtest-persistent-sqlite, sydtest-wai, text + , time, wai, xml-conduit, yesod, yesod-core, yesod-form, yesod-test + }: + mkDerivation { + pname = "sydtest-yesod"; + version = "0.2.0.1"; + sha256 = "1h2gqwp968n1gyg9r7x82c6kdnnfs7m341j7w7wbx3rcvd57c2jf"; + libraryHaskellDepends = [ + base blaze-builder bytestring case-insensitive containers cookie + exceptions http-client http-types mtl network pretty-show sydtest + sydtest-wai text time wai xml-conduit yesod-core yesod-test + ]; + testHaskellDepends = [ + base bytestring conduit cookie http-client http-types monad-logger + mtl persistent persistent-sqlite persistent-template QuickCheck + resourcet sydtest sydtest-persistent-sqlite text yesod yesod-form + ]; + testToolDepends = [ sydtest-discover ]; + description = "A yesod companion library for sydtest"; + license = "unknown"; + hydraPlatforms = lib.platforms.none; + }) {}; + "syfco" = callPackage ({ mkDerivation, array, base, containers, convertible, directory , mtl, parsec, transformers @@ -255550,24 +255627,6 @@ self: { }: mkDerivation { pname = "tasty-hedgehog"; - version = "1.0.1.0"; - sha256 = "0vkmhqfydyxbvjjbwvwn0q1f1a2dl9wmhz0s7020frpzwqcjwm5b"; - revision = "1"; - editedCabalFile = "1yhj5jpgsr1mflsadf1fgaj8hh7y3dnfsg95m6bni7xprdnw6nf9"; - libraryHaskellDepends = [ base hedgehog tagged tasty ]; - testHaskellDepends = [ - base hedgehog tasty tasty-expected-failure - ]; - description = "Integration for tasty and hedgehog"; - license = lib.licenses.bsd3; - }) {}; - - "tasty-hedgehog_1_1_0_0" = callPackage - ({ mkDerivation, base, hedgehog, tagged, tasty - , tasty-expected-failure - }: - mkDerivation { - pname = "tasty-hedgehog"; version = "1.1.0.0"; sha256 = "0cy49z8n124xh2ra2482vfy5if1n6d9lbdjma2zg1mxfj0k0zyfb"; libraryHaskellDepends = [ base hedgehog tagged tasty ]; @@ -255576,7 +255635,6 @@ self: { ]; description = "Integration for tasty and hedgehog"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "tasty-hedgehog-coverage" = callPackage @@ -255808,8 +255866,8 @@ self: { ({ mkDerivation, base, leancheck, tasty }: mkDerivation { pname = "tasty-leancheck"; - version = "0.0.1"; - sha256 = "06nki1l05hh5r0q2lkn4rmj0cl8hz7r7zc71r64fx2k9z65n5497"; + version = "0.0.2"; + sha256 = "1083xs3pvvwfindhkvd7g4bbiaa4g293vi7l2r25adbxz13snpdz"; libraryHaskellDepends = [ base leancheck tasty ]; testHaskellDepends = [ base leancheck tasty ]; description = "LeanCheck support for the Tasty test framework"; @@ -255964,6 +256022,30 @@ self: { license = lib.licenses.mit; }) {}; + "tasty-silver_3_2_2" = callPackage + ({ mkDerivation, ansi-terminal, async, base, bytestring, containers + , deepseq, directory, filepath, mtl, optparse-applicative, process + , process-extras, regex-tdfa, stm, tagged, tasty, tasty-hunit + , temporary, text, transformers + }: + mkDerivation { + pname = "tasty-silver"; + version = "3.2.2"; + sha256 = "0zsl6nna8ir215qyxhyh2czx4i16hzw1n1m8jw8ym02j6sp6iz13"; + libraryHaskellDepends = [ + ansi-terminal async base bytestring containers deepseq directory + filepath mtl optparse-applicative process process-extras regex-tdfa + stm tagged tasty temporary text + ]; + testHaskellDepends = [ + base directory filepath process tasty tasty-hunit temporary + transformers + ]; + description = "A fancy test runner, including support for golden tests"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "tasty-smallcheck" = callPackage ({ mkDerivation, base, optparse-applicative, smallcheck, tagged , tasty @@ -256399,6 +256481,8 @@ self: { ]; description = "Chart generation from tdigest"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "tdlib" = callPackage @@ -257759,35 +257843,37 @@ self: { }) {}; "termonad" = callPackage - ({ mkDerivation, adjunctions, base, Cabal, cabal-doctest + ({ mkDerivation, adjunctions, aeson, base, Cabal, cabal-doctest , classy-prelude, colour, constraints, containers, data-default - , directory, distributive, dyre, file-embed, filepath, focuslist - , genvalidity-containers, genvalidity-hspec, gi-gdk, gi-gio - , gi-glib, gi-gtk, gi-pango, gi-vte, gtk3, haskell-gi-base + , directory, distributive, doctest, dyre, file-embed, filepath + , focuslist, genvalidity-containers, genvalidity-hspec, gi-gdk + , gi-gio, gi-glib, gi-gtk, gi-pango, gi-vte, gtk3, haskell-gi-base , hedgehog, inline-c, lens, mono-traversable, pcre2, pretty-simple - , QuickCheck, tasty, tasty-hedgehog, tasty-hspec, text - , transformers, vte_291, xml-conduit, xml-html-qq, yaml + , QuickCheck, tasty, tasty-hedgehog, tasty-hspec, template-haskell + , text, transformers, unordered-containers, vte_291, xml-conduit + , xml-html-qq, yaml }: mkDerivation { pname = "termonad"; - version = "4.1.1.0"; - sha256 = "1v8w6wf5y3708pjya97zzq1w8vb3g8vqc46pbfy7rizg5jfbr2ba"; + version = "4.2.0.0"; + sha256 = "1g9zc1ddm47b8ry78crax8ry43sj1wv3272qv5r0y5jvz9y58r6r"; isLibrary = true; isExecutable = true; enableSeparateDataOutput = true; setupHaskellDepends = [ base Cabal cabal-doctest ]; libraryHaskellDepends = [ - adjunctions base classy-prelude colour constraints containers + adjunctions aeson base classy-prelude colour constraints containers data-default directory distributive dyre file-embed filepath focuslist gi-gdk gi-gio gi-glib gi-gtk gi-pango gi-vte haskell-gi-base inline-c lens mono-traversable pretty-simple - QuickCheck text transformers xml-conduit xml-html-qq yaml + QuickCheck text transformers unordered-containers xml-conduit + xml-html-qq yaml ]; libraryPkgconfigDepends = [ gtk3 pcre2 vte_291 ]; executableHaskellDepends = [ base ]; testHaskellDepends = [ - base genvalidity-containers genvalidity-hspec hedgehog lens - QuickCheck tasty tasty-hedgehog tasty-hspec + base doctest genvalidity-containers genvalidity-hspec hedgehog lens + QuickCheck tasty tasty-hedgehog tasty-hspec template-haskell ]; description = "Terminal emulator configurable in Haskell"; license = lib.licenses.bsd3; @@ -257920,6 +258006,8 @@ self: { ]; description = "Tesla API client"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "test-fixture" = callPackage @@ -258022,8 +258110,8 @@ self: { ({ mkDerivation, base, leancheck, test-framework }: mkDerivation { pname = "test-framework-leancheck"; - version = "0.0.1"; - sha256 = "0bwzc0vq28cmy5r966jxhacijd2hkna4magd9aw5wz34dcp4qv13"; + version = "0.0.4"; + sha256 = "0aa21r999jj59plzkn1px02k3a87znwhagdjmdsik2xvy5wrzgzv"; libraryHaskellDepends = [ base leancheck test-framework ]; testHaskellDepends = [ base leancheck test-framework ]; description = "LeanCheck support for test-framework"; @@ -258652,28 +258740,6 @@ self: { "texmath" = callPackage ({ mkDerivation, base, bytestring, containers, directory, filepath - , mtl, pandoc-types, parsec, process, syb, temporary, text - , utf8-string, xml - }: - mkDerivation { - pname = "texmath"; - version = "0.12.2"; - sha256 = "0lqib59cnvxvgj6k8wk74g5xbamf63q3z7wnwc8r2d56z05djvxy"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - base containers mtl pandoc-types parsec syb text xml - ]; - testHaskellDepends = [ - base bytestring directory filepath process temporary text - utf8-string xml - ]; - description = "Conversion between formats used to represent mathematics"; - license = lib.licenses.gpl2Only; - }) {}; - - "texmath_0_12_3" = callPackage - ({ mkDerivation, base, bytestring, containers, directory, filepath , mtl, pandoc-types, parsec, process, split, syb, temporary, text , utf8-string, xml }: @@ -258692,7 +258758,6 @@ self: { ]; description = "Conversion between formats used to represent mathematics"; license = lib.licenses.gpl2Only; - hydraPlatforms = lib.platforms.none; }) {}; "texrunner" = callPackage @@ -259490,6 +259555,8 @@ self: { ]; description = "Library for Time parsing from Text into UTCTime"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "text-trie" = callPackage @@ -261342,8 +261409,8 @@ self: { }: mkDerivation { pname = "tidal"; - version = "1.7.4"; - sha256 = "080zncw6gp0dzwm9vd82c789v1x00nfzz8r1ldb4hl67v04jf8hi"; + version = "1.7.5"; + sha256 = "0mcq1sll148qfwkyad6y9k64zrlbkflzba9wqcgqydgfm0jyr7z7"; enableSeparateDataOutput = true; libraryHaskellDepends = [ base bifunctors bytestring clock colour containers deepseq hosc @@ -261357,15 +261424,15 @@ self: { license = lib.licenses.gpl3Only; }) {}; - "tidal_1_7_5" = callPackage + "tidal_1_7_7" = callPackage ({ mkDerivation, base, bifunctors, bytestring, clock, colour , containers, criterion, deepseq, hosc, microspec, network, parsec , primitive, random, text, transformers, weigh }: mkDerivation { pname = "tidal"; - version = "1.7.5"; - sha256 = "0mcq1sll148qfwkyad6y9k64zrlbkflzba9wqcgqydgfm0jyr7z7"; + version = "1.7.7"; + sha256 = "19r9h45yd2xwmah81xqmwx5bi5gi0x2hqhq2nqa47jgb0nd12a25"; enableSeparateDataOutput = true; libraryHaskellDepends = [ base bifunctors bytestring clock colour containers deepseq hosc @@ -261590,14 +261657,14 @@ self: { hydraPlatforms = lib.platforms.none; }) {}; - "time_1_11_1_2" = callPackage + "time_1_12" = callPackage ({ mkDerivation, base, criterion, deepseq, QuickCheck, random , tasty, tasty-hunit, tasty-quickcheck }: mkDerivation { pname = "time"; - version = "1.11.1.2"; - sha256 = "0r33rxxrrpyzxpdihky93adlpdj0r8k6wh2i1sx0nb7zhvfnfj27"; + version = "1.12"; + sha256 = "0xavlg1lsq0fip6mwvphr4xz2iykys4wsn468hr8qdg6xqab0x0b"; libraryHaskellDepends = [ base deepseq ]; testHaskellDepends = [ base deepseq QuickCheck random tasty tasty-hunit tasty-quickcheck @@ -263054,30 +263121,8 @@ self: { }: mkDerivation { pname = "tlynx"; - version = "0.5.0.2"; - sha256 = "1d28xk346h92imp6lnmy0g9mql8nd1zna1mnfs6mqhf38l8sm0k4"; - isLibrary = true; - isExecutable = true; - libraryHaskellDepends = [ - aeson attoparsec base bytestring comonad containers elynx-tools - elynx-tree gnuplot lifted-async monad-logger mwc-random - optparse-applicative parallel statistics text transformers vector - ]; - executableHaskellDepends = [ base ]; - description = "Handle phylogenetic trees"; - license = lib.licenses.gpl3Plus; - }) {}; - - "tlynx_0_5_1_0" = callPackage - ({ mkDerivation, aeson, attoparsec, base, bytestring, comonad - , containers, elynx-tools, elynx-tree, gnuplot, lifted-async - , monad-logger, mwc-random, optparse-applicative, parallel - , statistics, text, transformers, vector - }: - mkDerivation { - pname = "tlynx"; - version = "0.5.1.0"; - sha256 = "005382x1xsv6bsjfmjxirvcmh3nfyhigkkc08y2wz16b7dpwvk6k"; + version = "0.5.1.1"; + sha256 = "1hp2j5yiki2li7h3097vkyis0an8aai1ng8dc0zv4d4dp4kmfvyx"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -263088,7 +263133,6 @@ self: { executableHaskellDepends = [ base ]; description = "Handle phylogenetic trees"; license = lib.licenses.gpl3Plus; - hydraPlatforms = lib.platforms.none; }) {}; "tmapchan" = callPackage @@ -263159,8 +263203,6 @@ self: { ]; description = "Start and stop a temporary postgres"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; - broken = true; }) {}; "tmpl" = callPackage @@ -263965,8 +264007,8 @@ self: { ({ mkDerivation, base, filepath, hspec, profunctors, text }: mkDerivation { pname = "tophat"; - version = "1.0.0.0"; - sha256 = "0zwhik8x2z1kbyv873kvdbnzyyg4f6qky1gw03icarxan9553s7m"; + version = "1.0.1.0"; + sha256 = "0q00lrv02pmy5zgnqciwaj87hs7daraj6pvcz9hm93djk6cgs5fn"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base profunctors text ]; @@ -264480,8 +264522,8 @@ self: { }: mkDerivation { pname = "tracing"; - version = "0.0.6.2"; - sha256 = "0fabwv87b9r8khyk8gr769j6k3wqddrgzh86inx0xjx9swgdrr6q"; + version = "0.0.7.0"; + sha256 = "0mm2s367n7zggnbgcvhffjin47pfyzr76ywg60vhfjcb1zzmkv4l"; libraryHaskellDepends = [ aeson base base16-bytestring bytestring case-insensitive containers http-client mtl network random stm text time transformers unliftio @@ -265316,6 +265358,21 @@ self: { license = lib.licenses.mit; }) {}; + "traverse-with-class_1_0_1_1" = callPackage + ({ mkDerivation, base, tasty, tasty-hunit, template-haskell + , transformers + }: + mkDerivation { + pname = "traverse-with-class"; + version = "1.0.1.1"; + sha256 = "0c0h902hr3gnlmlvqjhz3k5abyg0ays2g2c1kwrhbz0nhgfwk656"; + libraryHaskellDepends = [ base template-haskell transformers ]; + testHaskellDepends = [ base tasty tasty-hunit ]; + description = "Generic applicative traversals"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "travis" = callPackage ({ mkDerivation, aeson, base, bytestring, http-conduit , transformers @@ -270338,15 +270395,15 @@ self: { }) {}; "unicode-tricks" = callPackage - ({ mkDerivation, base, containers, data-default, hashable, hspec - , hspec-discover, QuickCheck, text + ({ mkDerivation, base, containers, data-default, deepseq, hashable + , hspec, hspec-discover, QuickCheck, text }: mkDerivation { pname = "unicode-tricks"; - version = "0.10.1.0"; - sha256 = "0f9giqhd4jjqdd0wcbrrd8f01bhqv25m13ss3f1jfaaacaiylpam"; + version = "0.11.0.0"; + sha256 = "0f1r8s69if5hjqy1p13b30f8wnbc52sya4zdcw3krwvmizwqq3dh"; libraryHaskellDepends = [ - base containers data-default hashable QuickCheck text + base containers data-default deepseq hashable QuickCheck text ]; testHaskellDepends = [ base hashable hspec QuickCheck ]; testToolDepends = [ hspec-discover ]; @@ -270544,8 +270601,8 @@ self: { pname = "union"; version = "0.1.2"; sha256 = "1i4fvlwkw1wx64a6l8342aqfqsdq7fqa4p24g3i5gn5704lxrsb3"; - revision = "5"; - editedCabalFile = "1qxwx43ba4ixq6g78y6gs4zqq4v2ka0qi79gpvny9qw577gwbbd3"; + revision = "6"; + editedCabalFile = "1n1innjiqksancaazsczryyjfr7905q1iq9radwqq5ngl8xi83wz"; libraryHaskellDepends = [ base deepseq hashable profunctors tagged vinyl ]; @@ -270957,8 +271014,8 @@ self: { }: mkDerivation { pname = "units-parser"; - version = "0.1.1.3"; - sha256 = "0lyy8nh86b0nq2znkli8y1zcg87l6acaaxi8b1m6falb6xnfi0nw"; + version = "0.1.1.4"; + sha256 = "1sdf8jqq03x20gj91faqir9vrdjq7cxpnypx7bi953vjg8fh2jfm"; libraryHaskellDepends = [ base containers mtl multimap parsec ]; testHaskellDepends = [ base containers mtl multimap parsec syb tasty tasty-hunit @@ -273463,6 +273520,8 @@ self: { pname = "uuid-orphans"; version = "1.4.5"; sha256 = "14d7gyf3sa2874r0dhj3ydvmb1iz174kp4pxz7aq984zb4m6d87z"; + revision = "2"; + editedCabalFile = "1202zn5f70f1yvmaknm8l34igg9ihyqs8lhch4ihvx9vcqxs3c0v"; libraryHaskellDepends = [ base safecopy text th-lift uuid-types web-routes ]; @@ -273519,8 +273578,8 @@ self: { ({ mkDerivation, base, Cabal, directory, filepath, HUnit, text }: mkDerivation { pname = "uusi"; - version = "0.4.1.0"; - sha256 = "14g56ygqx8n24hvbb9bzi7yy5wjfsvw3m89lad0xy8knf6gnh6y3"; + version = "0.4.2.0"; + sha256 = "0c7zcx594cnfng9sszm70fcfi81n7j54vvk32mvp8j52d7f812cb"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ base Cabal text ]; @@ -273933,6 +273992,19 @@ self: { license = lib.licenses.mit; }) {}; + "validity_0_11_0_1" = callPackage + ({ mkDerivation, base, hspec }: + mkDerivation { + pname = "validity"; + version = "0.11.0.1"; + sha256 = "086nj5ymp4mxxfw9qjgjhd4j3z7gl2y9d89p0b7bkap5ampgdw2x"; + libraryHaskellDepends = [ base ]; + testHaskellDepends = [ base hspec ]; + description = "Validity typeclass"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "validity-aeson" = callPackage ({ mkDerivation, aeson, base, hspec, validity, validity-scientific , validity-text, validity-unordered-containers, validity-vector @@ -275317,8 +275389,8 @@ self: { }: mkDerivation { pname = "verifiable-expressions"; - version = "0.6.1"; - sha256 = "0s3615m849xj0df6ia18kg4i54z87x3c6yxgv594dwf9mf9dw4x8"; + version = "0.6.2"; + sha256 = "1nrlcbimng6qf4g7h4hxg3j05kd0hlihkhp8hj5js44n29vg89qk"; libraryHaskellDepends = [ base containers lens mtl sbv transformers union vinyl ]; @@ -275447,26 +275519,6 @@ self: { }: mkDerivation { pname = "versions"; - version = "4.0.3"; - sha256 = "0rp62aih4blpahymqlkrfzywdqb1mkhy6f021vp74ljknpch4scf"; - libraryHaskellDepends = [ - base deepseq hashable megaparsec parser-combinators text - ]; - testHaskellDepends = [ - base megaparsec microlens QuickCheck tasty tasty-hunit - tasty-quickcheck text - ]; - description = "Types and parsers for software version numbers"; - license = lib.licenses.bsd3; - }) {}; - - "versions_5_0_0" = callPackage - ({ mkDerivation, base, deepseq, hashable, megaparsec, microlens - , parser-combinators, QuickCheck, tasty, tasty-hunit - , tasty-quickcheck, text - }: - mkDerivation { - pname = "versions"; version = "5.0.0"; sha256 = "1rfxjivdsaqc6w7dfqdycy3a81rsajvpfyi5si9ssc0w3ljfsbzr"; libraryHaskellDepends = [ @@ -275478,7 +275530,6 @@ self: { ]; description = "Types and parsers for software version numbers"; license = lib.licenses.bsd3; - hydraPlatforms = lib.platforms.none; }) {}; "vflow-types" = callPackage @@ -276619,8 +276670,8 @@ self: { ({ mkDerivation, base, bytestring, transformers, vector, vulkan }: mkDerivation { pname = "vulkan"; - version = "3.10.3"; - sha256 = "1ksx4klcj9g4s4mrxmcr47ydw3xzglb8vd0zmg7i5xa7hz0ksjw0"; + version = "3.11"; + sha256 = "0kpnchaidl555zr5k166kmxnb8kiablnwjhi2gb665v64shj3k2k"; libraryHaskellDepends = [ base bytestring transformers vector ]; libraryPkgconfigDepends = [ vulkan ]; description = "Bindings to the Vulkan graphics API"; @@ -276648,8 +276699,8 @@ self: { }: mkDerivation { pname = "vulkan-utils"; - version = "0.5.0.1"; - sha256 = "0h904kz61ym7d0qaa59d52a4kw09iaz92q5qdlnmnyn2bdmqp3bl"; + version = "0.5.0.2"; + sha256 = "19jxd73li1ybdfzznlql2im8k0qad1yas75d5cdfvjazv7x4g3n1"; setupHaskellDepends = [ base Cabal cabal-doctest ]; libraryHaskellDepends = [ base bytestring containers dependent-map dependent-sum extra @@ -277492,8 +277543,8 @@ self: { }: mkDerivation { pname = "wai-middleware-auth"; - version = "0.2.4.1"; - sha256 = "1q8vj3ri5fvdhlwls7az4zcwk7iyc3fi4yf968086pkg92hpzcdl"; + version = "0.2.5.0"; + sha256 = "12yv8rcybd7saflfcyjy08p1m6il07nk831pkj0isxk8mwjq64l4"; isLibrary = true; isExecutable = true; libraryHaskellDepends = [ @@ -278857,6 +278908,40 @@ self: { license = lib.licenses.mit; }) {}; + "warp_3_3_17" = callPackage + ({ mkDerivation, array, async, auto-update, base, bsb-http-chunked + , bytestring, case-insensitive, containers, directory, gauge + , ghc-prim, hashable, hspec, http-client, http-date, http-types + , http2, HUnit, iproute, network, process, QuickCheck + , simple-sendfile, stm, streaming-commons, text, time, time-manager + , unix, unix-compat, unliftio, vault, wai, word8, x509 + }: + mkDerivation { + pname = "warp"; + version = "3.3.17"; + sha256 = "0v54ca3wpa79gdyiikwhbv9h8b5vr3d60piq3ndb2v7s7fi1qpm0"; + libraryHaskellDepends = [ + array auto-update base bsb-http-chunked bytestring case-insensitive + containers ghc-prim hashable http-date http-types http2 iproute + network simple-sendfile stm streaming-commons text time-manager + unix unix-compat unliftio vault wai word8 x509 + ]; + testHaskellDepends = [ + array async auto-update base bsb-http-chunked bytestring + case-insensitive containers directory ghc-prim hashable hspec + http-client http-date http-types http2 HUnit iproute network + process QuickCheck simple-sendfile stm streaming-commons text time + time-manager unix unix-compat unliftio vault wai word8 x509 + ]; + benchmarkHaskellDepends = [ + auto-update base bytestring containers gauge hashable http-date + http-types network time-manager unix unix-compat unliftio x509 + ]; + description = "A fast, light-weight web server for WAI applications"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "warp-dynamic" = callPackage ({ mkDerivation, base, data-default, dyre, http-types, wai, warp }: mkDerivation { @@ -279750,6 +279835,8 @@ self: { ]; description = "A super-simple web server framework"; license = lib.licenses.asl20; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "webcloud" = callPackage @@ -280229,10 +280316,8 @@ self: { }: mkDerivation { pname = "webp"; - version = "0.1.0.0"; - sha256 = "153icv3911drnjkii2b0csdq3ksavmxpz26zm9xcp24kfbsr6gvk"; - revision = "2"; - editedCabalFile = "0ycp16b2fb4x3h6rs4j2wywy7la1b7ri3419p8mnpf1ipmq6d1vk"; + version = "0.1.0.1"; + sha256 = "12ryx87z36ra243vcira7jkpn6k3c5sqp5r4h7zvxxm64rajyxcd"; libraryHaskellDepends = [ base bytestring JuicyPixels vector ]; libraryPkgconfigDepends = [ libwebp ]; libraryToolDepends = [ c2hs ]; @@ -280682,19 +280767,20 @@ self: { "what4" = callPackage ({ mkDerivation, attoparsec, base, bifunctors, bimap, bv-sized - , bytestring, config-value, containers, data-binary-ieee754 - , deepseq, deriving-compat, directory, exceptions, extra, filepath - , fingertree, ghc-prim, hashable, hashtables, hedgehog, io-streams - , lens, libBF, mtl, panic, parameterized-utils, prettyprinter - , process, QuickCheck, scientific, tasty, tasty-hedgehog - , tasty-hunit, tasty-quickcheck, template-haskell, temporary, text + , bytestring, config-value, containers, contravariant + , data-binary-ieee754, deepseq, deriving-compat, directory + , exceptions, extra, filepath, fingertree, ghc-prim, hashable + , hashtables, hedgehog, io-streams, lens, libBF, lumberjack, mtl + , panic, parameterized-utils, prettyprinter, process, QuickCheck + , scientific, tasty, tasty-checklist, tasty-hedgehog, tasty-hunit + , tasty-quickcheck, tasty-sugar, template-haskell, temporary, text , th-abstraction, th-lift, th-lift-instances, transformers , unordered-containers, utf8-string, vector, versions, zenc }: mkDerivation { pname = "what4"; - version = "1.1"; - sha256 = "1656h3865vzd96ggibm1wkhnpmjrx6crv87kgmwphfy8hgl5j8kq"; + version = "1.2.1"; + sha256 = "0cbvdiszqzhw50m51kfm0qsadq04dxwb8836hibv61sshgckpsf3"; isLibrary = true; isExecutable = true; enableSeparateDataOutput = true; @@ -280709,9 +280795,11 @@ self: { ]; executableHaskellDepends = [ base parameterized-utils ]; testHaskellDepends = [ - base bv-sized bytestring containers data-binary-ieee754 hedgehog - libBF parameterized-utils QuickCheck tasty tasty-hedgehog - tasty-hunit tasty-quickcheck text transformers versions + base bv-sized bytestring containers contravariant + data-binary-ieee754 exceptions hedgehog io-streams libBF lumberjack + parameterized-utils prettyprinter QuickCheck tasty tasty-checklist + tasty-hedgehog tasty-hunit tasty-quickcheck tasty-sugar text + transformers versions ]; description = "Solver-agnostic symbolic values support for issuing queries"; license = lib.licenses.bsd3; @@ -283937,6 +284025,35 @@ self: { license = lib.licenses.mit; }) {}; + "xlsx_0_8_4" = callPackage + ({ mkDerivation, attoparsec, base, base64-bytestring, binary-search + , bytestring, conduit, containers, criterion, data-default, deepseq + , Diff, errors, extra, filepath, groom, lens, mtl, network-uri + , old-locale, raw-strings-qq, safe, smallcheck, tasty, tasty-hunit + , tasty-smallcheck, text, time, transformers, vector, xeno + , xml-conduit, zip-archive, zlib + }: + mkDerivation { + pname = "xlsx"; + version = "0.8.4"; + sha256 = "0xmz9qpqyz2gwlrjsy2m79s4xswb6lz7fbvybd4awg5vy0y6pl41"; + libraryHaskellDepends = [ + attoparsec base base64-bytestring binary-search bytestring conduit + containers data-default deepseq errors extra filepath lens mtl + network-uri old-locale safe text time transformers vector xeno + xml-conduit zip-archive zlib + ]; + testHaskellDepends = [ + base bytestring containers Diff groom lens mtl raw-strings-qq + smallcheck tasty tasty-hunit tasty-smallcheck text time vector + xml-conduit + ]; + benchmarkHaskellDepends = [ base bytestring criterion ]; + description = "Simple and incomplete Excel file parser/writer"; + license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + }) {}; + "xlsx-tabular" = callPackage ({ mkDerivation, aeson, base, bytestring, containers, data-default , lens, text, xlsx @@ -285105,10 +285222,8 @@ self: { ({ mkDerivation, base, magic, mtl, random, unix, xmonad }: mkDerivation { pname = "xmonad-wallpaper"; - version = "0.0.1.4"; - sha256 = "0f6214kqp86xnk1zginjiprnqlj2fzcvh3w5sv3yvqg98mwdd0cg"; - revision = "1"; - editedCabalFile = "1vxgv702wgr0k0kzd602v8xv11q5dap4mfhqifnr928bwf9scp28"; + version = "0.0.1.5"; + sha256 = "1habj1q0m98vnq24vsya5rzrvkhglkwa90fr85glmh9h6gcqywgq"; libraryHaskellDepends = [ base magic mtl random unix xmonad ]; description = "xmonad wallpaper extension"; license = lib.licenses.lgpl3Only; @@ -287842,28 +287957,6 @@ self: { ({ mkDerivation, aeson, attoparsec, base, blaze-builder, blaze-html , blaze-markup, byteable, bytestring, containers, data-default , email-validate, hspec, network-uri, persistent, resourcet - , semigroups, shakespeare, text, time, transformers, wai - , xss-sanitize, yesod-core, yesod-persistent - }: - mkDerivation { - pname = "yesod-form"; - version = "1.6.7"; - sha256 = "0mny71dyp6cp5akyp5wvmrhmip5rkqi8ibdn3lipvmajx9h58r5d"; - libraryHaskellDepends = [ - aeson attoparsec base blaze-builder blaze-html blaze-markup - byteable bytestring containers data-default email-validate - network-uri persistent resourcet semigroups shakespeare text time - transformers wai xss-sanitize yesod-core yesod-persistent - ]; - testHaskellDepends = [ base hspec text time ]; - description = "Form handling support for Yesod Web Framework"; - license = lib.licenses.mit; - }) {}; - - "yesod-form_1_7_0" = callPackage - ({ mkDerivation, aeson, attoparsec, base, blaze-builder, blaze-html - , blaze-markup, byteable, bytestring, containers, data-default - , email-validate, hspec, network-uri, persistent, resourcet , shakespeare, text, time, transformers, wai, xss-sanitize , yesod-core, yesod-persistent }: @@ -287880,7 +287973,6 @@ self: { testHaskellDepends = [ base hspec text time ]; description = "Form handling support for Yesod Web Framework"; license = lib.licenses.mit; - hydraPlatforms = lib.platforms.none; }) {}; "yesod-form-bootstrap4" = callPackage @@ -288038,6 +288130,8 @@ self: { ]; description = "Code for using the ip package with yesod"; license = lib.licenses.bsd3; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "yesod-job-queue" = callPackage @@ -290114,12 +290208,13 @@ self: { }) {}; "zenc" = callPackage - ({ mkDerivation, base }: + ({ mkDerivation, base, hedgehog, hspec, hspec-hedgehog }: mkDerivation { pname = "zenc"; - version = "0.1.1"; - sha256 = "0p0h7vz14k9v8gsnpkb9ca61i1k67vvsjg0bzy0ag4m20k94zlb2"; + version = "0.1.2"; + sha256 = "0y1waianb7jcad5y3ilns1mvf6mdk58ml1iwxcx1cawr9basj5xr"; libraryHaskellDepends = [ base ]; + testHaskellDepends = [ base hedgehog hspec hspec-hedgehog ]; description = "GHC style name Z-encoding and Z-decoding"; license = lib.licenses.bsd3; }) {}; @@ -291506,6 +291601,8 @@ self: { ]; description = "Password strength estimation based on zxcvbn"; license = lib.licenses.mit; + hydraPlatforms = lib.platforms.none; + broken = true; }) {}; "zydiskell" = callPackage diff --git a/pkgs/development/interpreters/php/generic.nix b/pkgs/development/interpreters/php/generic.nix index c139e17ff0f..d64349eaa93 100644 --- a/pkgs/development/interpreters/php/generic.nix +++ b/pkgs/development/interpreters/php/generic.nix @@ -124,15 +124,15 @@ let ln -s ${extraInit} $out/lib/php.ini if test -e $out/bin/php; then - wrapProgram $out/bin/php --prefix PHP_INI_SCAN_DIR : $out/lib + wrapProgram $out/bin/php --set PHP_INI_SCAN_DIR $out/lib fi if test -e $out/bin/php-fpm; then - wrapProgram $out/bin/php-fpm --prefix PHP_INI_SCAN_DIR : $out/lib + wrapProgram $out/bin/php-fpm --set PHP_INI_SCAN_DIR $out/lib fi if test -e $out/bin/phpdbg; then - wrapProgram $out/bin/phpdbg --prefix PHP_INI_SCAN_DIR : $out/lib + wrapProgram $out/bin/phpdbg --set PHP_INI_SCAN_DIR $out/lib fi ''; }; diff --git a/pkgs/development/interpreters/wasm3/default.nix b/pkgs/development/interpreters/wasm3/default.nix new file mode 100644 index 00000000000..b16dc78ac08 --- /dev/null +++ b/pkgs/development/interpreters/wasm3/default.nix @@ -0,0 +1,33 @@ +{ lib, stdenv, cmake, fetchFromGitHub }: + +stdenv.mkDerivation rec { + pname = "wasm3"; + version = "0.5.0"; + + src = fetchFromGitHub { + owner = "wasm3"; + repo = "wasm3"; + rev = "v${version}"; + sha256 = "07zzmk776j8ydyxhrnnjiscbhhmz182a62r6aix6kfk5kq2cwia2"; + }; + + nativeBuildInputs = [ cmake ]; + + cmakeFlags = [ + "-DBUILD_WASI=simple" + ]; + + installPhase = '' + runHook preInstal + install -Dm755 wasm3 -t $out/bin + runHook postInstall + ''; + + meta = with lib; { + homepage = "https://github.com/wasm3/wasm3"; + description = "The fastest WebAssembly interpreter, and the most universal runtime."; + platforms = platforms.all; + maintainers = with maintainers; [ malbarbo ]; + license = licenses.mit; + }; +} diff --git a/pkgs/development/libraries/drogon/default.nix b/pkgs/development/libraries/drogon/default.nix index ebb989c9403..1b27c7a2b07 100644 --- a/pkgs/development/libraries/drogon/default.nix +++ b/pkgs/development/libraries/drogon/default.nix @@ -1,4 +1,11 @@ -{ stdenv, fetchFromGitHub, cmake, jsoncpp, libossp_uuid, zlib, openssl, lib }: +{ stdenv, fetchFromGitHub, cmake, jsoncpp, libossp_uuid, zlib, openssl, lib +# miscellaneous +, brotli, c-ares +# databases +, sqliteSupport ? true, sqlite +, postgresSupport ? false, postgresql +, redisSupport ? false, hiredis +, mysqlSupport ? false, libmysqlclient, mariadb }: stdenv.mkDerivation rec { pname = "drogon"; @@ -24,7 +31,13 @@ stdenv.mkDerivation rec { libossp_uuid zlib openssl - ]; + brotli + c-ares + ] ++ lib.optional sqliteSupport sqlite + ++ lib.optional postgresSupport postgresql + ++ lib.optional redisSupport hiredis + # drogon uses mariadb for mysql (see https://github.com/an-tao/drogon/wiki/ENG-02-Installation#Library-Dependencies) + ++ lib.optional mysqlSupport [ libmysqlclient mariadb ]; patches = [ # this part of the test would normally fail because it attempts to configure a CMake project that uses find_package on itself diff --git a/pkgs/development/node-packages/node-packages.json b/pkgs/development/node-packages/node-packages.json index 6c90e0089ce..ea8f2ef7a18 100644 --- a/pkgs/development/node-packages/node-packages.json +++ b/pkgs/development/node-packages/node-packages.json @@ -274,4 +274,5 @@ , "yaml-language-server" , "yarn" , "yo" +, "zx" ] diff --git a/pkgs/development/node-packages/node-packages.nix b/pkgs/development/node-packages/node-packages.nix index 7645954b1eb..438a0b56c18 100644 --- a/pkgs/development/node-packages/node-packages.nix +++ b/pkgs/development/node-packages/node-packages.nix @@ -1507,13 +1507,13 @@ let sha512 = "Xl8SPYtdjcMoCsIM4teyVRg7jIcgl8F2kRtoCcXuHzXswt9UxZCS6BzRo8fcnCuP6u2XtPgvyonmEPF57Kxo9Q=="; }; }; - "@babel/standalone-7.14.6" = { + "@babel/standalone-7.14.7" = { name = "_at_babel_slash_standalone"; packageName = "@babel/standalone"; - version = "7.14.6"; + version = "7.14.7"; src = fetchurl { - url = "https://registry.npmjs.org/@babel/standalone/-/standalone-7.14.6.tgz"; - sha512 = "oAoSp82jhJFnXKybKTOj5QF04XxiDRyiiqrFToiU1udlBXuZoADlPmmnOcuqBrZxSNNUjzJIVK8vt838Qoqjxg=="; + url = "https://registry.npmjs.org/@babel/standalone/-/standalone-7.14.7.tgz"; + sha512 = "7RlfMPR4604SbYpj5zvs2ZK587hVhixgU9Pd9Vs8lB8KYtT3U0apXSf0vZXhy8XRh549eUmJOHXhWKTO3ObzOQ=="; }; }; "@babel/template-7.14.5" = { @@ -2497,6 +2497,15 @@ let sha512 = "UXepkOKCATJrhHGsxt+CGfpZy9zUn1q9mop5kfcXq1fBkTePxVNPOdnISlCbJFlCtld+pSLGyZCzr9/zVprFKA=="; }; }; + "@grpc/grpc-js-1.3.3" = { + name = "_at_grpc_slash_grpc-js"; + packageName = "@grpc/grpc-js"; + version = "1.3.3"; + src = fetchurl { + url = "https://registry.npmjs.org/@grpc/grpc-js/-/grpc-js-1.3.3.tgz"; + sha512 = "KkKZrX3fVTBYCtUk8I+Y4xWaauEEOIR1mIGoPFUK8C+a9TTub5dmjowJpFGz0dqYj//wJcgVR9fqpoNhSYFfHQ=="; + }; + }; "@grpc/proto-loader-0.5.6" = { name = "_at_grpc_slash_proto-loader"; packageName = "@grpc/proto-loader"; @@ -3946,13 +3955,13 @@ let sha512 = "KiXfYPO/X24p7EYQjcjBTizoyfY3U8zPv68Rte0EtayW2ZSqIslLLpNNd2gteqdh0Q83mzSiESdhlQHd0Ckjjg=="; }; }; - "@netlify/plugin-edge-handlers-1.11.18" = { + "@netlify/plugin-edge-handlers-1.11.19" = { name = "_at_netlify_slash_plugin-edge-handlers"; packageName = "@netlify/plugin-edge-handlers"; - version = "1.11.18"; + version = "1.11.19"; src = fetchurl { - url = "https://registry.npmjs.org/@netlify/plugin-edge-handlers/-/plugin-edge-handlers-1.11.18.tgz"; - sha512 = "hpZggKZ0xAGp5M++zjRaMPT+0Wr4DLi1dtPgWeF3XX1cwgxbdoAk///J24jyt0j89lW4s7GxobhJiVq82yuXew=="; + url = "https://registry.npmjs.org/@netlify/plugin-edge-handlers/-/plugin-edge-handlers-1.11.19.tgz"; + sha512 = "SAsVNIxF0asduPXbsr3wbyAB7lPZQxhG90EeOu0/Fo+BLhpO4g+6eH13I60qJpWCI/ucXXqSrUw8y6Oy5wpY0g=="; }; }; "@netlify/plugins-list-2.16.0" = { @@ -3982,13 +3991,13 @@ let sha512 = "YFi1Sf+ktQICS3tAKu7/uiGzLXgi8RNVwH9naUkziXwXQNH2oxDhKgy0/Zv5Nw0zMDJyKWrJ3xObWEC57mJ/KA=="; }; }; - "@netlify/zip-it-and-ship-it-4.4.1" = { + "@netlify/zip-it-and-ship-it-4.4.2" = { name = "_at_netlify_slash_zip-it-and-ship-it"; packageName = "@netlify/zip-it-and-ship-it"; - version = "4.4.1"; + version = "4.4.2"; src = fetchurl { - url = "https://registry.npmjs.org/@netlify/zip-it-and-ship-it/-/zip-it-and-ship-it-4.4.1.tgz"; - sha512 = "qV70DLxcbZ66mAThWfLd5nGchiTAGTn68yDLnpWNvqjUJTzEg76EQopVJTHcX5Eu4YmK60+MpLmkkdJ4tgjycA=="; + url = "https://registry.npmjs.org/@netlify/zip-it-and-ship-it/-/zip-it-and-ship-it-4.4.2.tgz"; + sha512 = "627ZNqfc4mdhU5mYDpcKUbmx8RoAUu8ZQiW/RIt5s7uDhruba3bK776Ygzog5b14hYWthT41/bf+9wQ+O9NFWw=="; }; }; "@node-red/editor-api-1.3.5" = { @@ -16978,13 +16987,13 @@ let sha1 = "c20b96d8c617748aaf1c16021760cd27fcb8cb75"; }; }; - "constructs-3.3.85" = { + "constructs-3.3.86" = { name = "constructs"; packageName = "constructs"; - version = "3.3.85"; + version = "3.3.86"; src = fetchurl { - url = "https://registry.npmjs.org/constructs/-/constructs-3.3.85.tgz"; - sha512 = "Or1CtFHhDLWEO64nFtDGStVSZKu0iOkxJ0y90elLR2zVkkFU7l3VujXRuJxY5Tb1SeuN0hSueC7SnMegFLafcw=="; + url = "https://registry.npmjs.org/constructs/-/constructs-3.3.86.tgz"; + sha512 = "y1EKluD1jl6jilmL2VH3B6qUADwJ+QqRpwfYe3y/WSKK283wr1apZPiwApm001n07Jg2ObXhPKep57xP5LLZ2w=="; }; }; "consume-http-header-1.0.0" = { @@ -32787,13 +32796,13 @@ let sha512 = "ChFg5qhvxCaM2bspCqizs48yMtsm5YLHjBoNZLCkbXyc3yMM5l8pnn787B5ww5TI3+tKxKYWkbiKf356kQ1OgQ=="; }; }; - "jsii-srcmak-0.1.288" = { + "jsii-srcmak-0.1.289" = { name = "jsii-srcmak"; packageName = "jsii-srcmak"; - version = "0.1.288"; + version = "0.1.289"; src = fetchurl { - url = "https://registry.npmjs.org/jsii-srcmak/-/jsii-srcmak-0.1.288.tgz"; - sha512 = "AyflsuwbsTyH6fChU9v82eTF74eNN07B8gxzpaB6IQyJPv5EADDR92/FjJKWq1dPM18f6s+GhTPE1DlbhcXrXw=="; + url = "https://registry.npmjs.org/jsii-srcmak/-/jsii-srcmak-0.1.289.tgz"; + sha512 = "nfOMq2qcf2JymxhEm79wehmyBiM35w5tQdnn5KR4IuYPML8HfUA3GT+1/d/xlaUAzQc0eguWIZqYczlmkScoKw=="; }; }; "json-bigint-0.2.3" = { @@ -33093,13 +33102,13 @@ let sha512 = "0/4Lv6IenJV0qj2oBdgPIAmFiKKnh8qh7bmLFJ+/ZZHLjSeiL3fKKGX3UryvKPbxFbhV+JcYo9KUC19GJ/Z/4A=="; }; }; - "json2jsii-0.1.255" = { + "json2jsii-0.1.256" = { name = "json2jsii"; packageName = "json2jsii"; - version = "0.1.255"; + version = "0.1.256"; src = fetchurl { - url = "https://registry.npmjs.org/json2jsii/-/json2jsii-0.1.255.tgz"; - sha512 = "I3BktDqYogR4XQ+O6/AQ//+OHCTeqPGxUTUJ5qiBjzEBxXkdhhYle+7P5GttUKM8YsKbRhDaqigCzY7rU0yGsg=="; + url = "https://registry.npmjs.org/json2jsii/-/json2jsii-0.1.256.tgz"; + sha512 = "6DyDhvjKJXM9K6XTxEwVhl2LAyRHSt6+guVyRWVvjYbIYprMQsN59y6wzmdNBBtJZJr/Gj5lytNNWn6NMS9Lcg=="; }; }; "json3-3.2.6" = { @@ -52259,6 +52268,15 @@ let sha512 = "oXF8tfxx5cDk8r2kYqlkUJzZpDBqVY/II2WhvU0n9Y3XYvAYRmeaf1PvvIvTgPnv4KJ+ES5M0PyDq5Jp+Ygy2g=="; }; }; + "shq-1.0.2" = { + name = "shq"; + packageName = "shq"; + version = "1.0.2"; + src = fetchurl { + url = "https://registry.npmjs.org/shq/-/shq-1.0.2.tgz"; + sha512 = "8AvNyHL75DHlkbLmzF7nzTzT2F0qEfSewwxHjH79Ww8S+hGpIZVlf8b0TcdOwv4HqIkOVBInu9n+wqhUSl9Wag=="; + }; + }; "shush-1.0.0" = { name = "shush"; packageName = "shush"; @@ -54293,13 +54311,13 @@ let sha512 = "zZ/Q1M+9ZWlrchgh4QauD/MEUFa6eC6H6FYq6T8Of/y82JqsQBLwN6YlzbO09evE7Rx6x0oliXDCnQSjwGwQRA=="; }; }; - "sscaff-1.2.8" = { + "sscaff-1.2.9" = { name = "sscaff"; packageName = "sscaff"; - version = "1.2.8"; + version = "1.2.9"; src = fetchurl { - url = "https://registry.npmjs.org/sscaff/-/sscaff-1.2.8.tgz"; - sha512 = "7cbC6S1FMmMbQqqdg51+9roaDE+g0ynHA3flW4vQl4zAq9nHvK4kXKr3qptmfAIaU6rLHKsP/ZsLfQCAouWgTw=="; + url = "https://registry.npmjs.org/sscaff/-/sscaff-1.2.9.tgz"; + sha512 = "BcOsAZGTh/vo0DArPc/MiJf6DYvC29fIH5b+sIzEFpz5vKPHp1RPOoVyhYpafPW45+xN9oKde6YfvaKaHvtBPw=="; }; }; "ssh-config-1.1.6" = { @@ -69663,7 +69681,7 @@ in sources."color-name-1.1.4" sources."colors-1.4.0" sources."commonmark-0.29.3" - sources."constructs-3.3.85" + sources."constructs-3.3.86" sources."date-format-3.0.0" sources."debug-4.3.2" sources."decamelize-5.0.0" @@ -69736,13 +69754,13 @@ in sources."yargs-16.2.0" ]; }) - (sources."jsii-srcmak-0.1.288" // { + (sources."jsii-srcmak-0.1.289" // { dependencies = [ sources."fs-extra-9.1.0" ]; }) sources."json-schema-0.3.0" - sources."json2jsii-0.1.255" + sources."json2jsii-0.1.256" sources."jsonfile-6.1.0" sources."jsonschema-1.4.0" sources."locate-path-5.0.0" @@ -69778,7 +69796,7 @@ in sources."snake-case-3.0.4" sources."sort-json-2.0.0" sources."spdx-license-list-6.4.0" - sources."sscaff-1.2.8" + sources."sscaff-1.2.9" (sources."streamroller-2.2.4" // { dependencies = [ sources."date-format-2.1.0" @@ -69893,7 +69911,7 @@ in sources."commonmark-0.29.3" sources."compress-commons-4.1.1" sources."concat-map-0.0.1" - sources."constructs-3.3.85" + sources."constructs-3.3.86" sources."convert-to-spaces-1.0.2" sources."core-util-is-1.0.2" sources."crc-32-1.2.0" @@ -70012,7 +70030,7 @@ in sources."yargs-16.2.0" ]; }) - (sources."jsii-srcmak-0.1.288" // { + (sources."jsii-srcmak-0.1.289" // { dependencies = [ sources."fs-extra-9.1.0" sources."jsonfile-6.1.0" @@ -70095,7 +70113,7 @@ in sources."slice-ansi-3.0.0" sources."sort-json-2.0.0" sources."spdx-license-list-6.4.0" - sources."sscaff-1.2.8" + sources."sscaff-1.2.9" sources."stack-utils-2.0.3" sources."stream-buffers-3.0.2" (sources."streamroller-2.2.4" // { @@ -81584,10 +81602,10 @@ in firebase-tools = nodeEnv.buildNodePackage { name = "firebase-tools"; packageName = "firebase-tools"; - version = "9.13.1"; + version = "9.14.0"; src = fetchurl { - url = "https://registry.npmjs.org/firebase-tools/-/firebase-tools-9.13.1.tgz"; - sha512 = "o8sdTxKtZOG1BJ8SmIHLbwJPkp+C25uUWq7Gcu5+Ksc1obHKKa8dYSH2kEC56gXyoGL5vmGdM8UUDTe7oUy4KA=="; + url = "https://registry.npmjs.org/firebase-tools/-/firebase-tools-9.14.0.tgz"; + sha512 = "CHR1Xw5LJ+hDQ/SaRqvuNXJEmpbPsOEtNRj6oD44VFGRp9ZTjY3irilSj6uv7S2P1A1XLEGyO7jEpCH5mkc9RQ=="; }; dependencies = [ (sources."@apidevtools/json-schema-ref-parser-9.0.9" // { @@ -81605,7 +81623,7 @@ in sources."google-auth-library-7.1.2" ]; }) - sources."@grpc/grpc-js-1.3.2" + sources."@grpc/grpc-js-1.3.3" sources."@grpc/proto-loader-0.6.2" sources."@jsdevtools/ono-7.1.3" (sources."@npmcli/move-file-1.1.2" // { @@ -83489,7 +83507,7 @@ in sources."@babel/plugin-transform-parameters-7.14.5" sources."@babel/plugin-transform-react-jsx-7.14.5" sources."@babel/runtime-7.14.6" - sources."@babel/standalone-7.14.6" + sources."@babel/standalone-7.14.7" sources."@babel/template-7.14.5" sources."@babel/traverse-7.14.5" sources."@babel/types-7.14.5" @@ -93550,10 +93568,10 @@ in mastodon-bot = nodeEnv.buildNodePackage { name = "mastodon-bot"; packageName = "mastodon-bot"; - version = "1.10.12-20210326145549"; + version = "1.11.0"; src = fetchurl { - url = "https://registry.npmjs.org/mastodon-bot/-/mastodon-bot-1.10.12-20210326145549.tgz"; - sha512 = "buuQt4rao3Vsq0og+WM8vrcVdD1vy1jhh8Vj6CynGuZ2BSY8fcyJKlPLkd3IK5xIJe3h+Iqnfx364eqmjwpw/Q=="; + url = "https://registry.npmjs.org/mastodon-bot/-/mastodon-bot-1.11.0.tgz"; + sha512 = "ZJiVQ87TLyJ+px5fqxlqL4Ho8Ii3v9WduD7Srs9mD2iCnKwSockDXocdWfUv5Bx70Z8/3NJDRIurlRPMAqbAvg=="; }; dependencies = [ sources."acorn-5.7.4" @@ -93747,6 +93765,7 @@ in sources."natural-compare-1.4.0" sources."next-tick-1.0.0" sources."node-addon-api-1.7.2" + sources."node-fetch-2.6.1" sources."number-is-nan-1.0.1" sources."oauth-0.9.15" sources."oauth-sign-0.9.0" @@ -94583,10 +94602,10 @@ in netlify-cli = nodeEnv.buildNodePackage { name = "netlify-cli"; packageName = "netlify-cli"; - version = "3.37.37"; + version = "3.37.38"; src = fetchurl { - url = "https://registry.npmjs.org/netlify-cli/-/netlify-cli-3.37.37.tgz"; - sha512 = "N07WvfR41K0rp2+f4ZvlU6WzoytKe3TPWvcHMrUeiXSPnMliMV/ggrU3zoUWSjPjfBh8CabBRbNbyySjgrR9WQ=="; + url = "https://registry.npmjs.org/netlify-cli/-/netlify-cli-3.37.38.tgz"; + sha512 = "huXGW0QZpqNQ8hFE2JfWl5hMhqtEXU05vMsa91ldL0b5JLoh7/9+xQGhfiHvlT3PMGNznc1ToBSN+6Fp0rJ1BQ=="; }; dependencies = [ sources."@babel/code-frame-7.14.5" @@ -94770,7 +94789,7 @@ in ]; }) sources."@netlify/open-api-2.5.0" - (sources."@netlify/plugin-edge-handlers-1.11.18" // { + (sources."@netlify/plugin-edge-handlers-1.11.19" // { dependencies = [ sources."@types/node-14.17.3" ]; @@ -94782,7 +94801,7 @@ in sources."execa-3.4.0" ]; }) - (sources."@netlify/zip-it-and-ship-it-4.4.1" // { + (sources."@netlify/zip-it-and-ship-it-4.4.2" // { dependencies = [ sources."cliui-7.0.4" sources."cp-file-9.1.0" @@ -106906,10 +106925,10 @@ in snyk = nodeEnv.buildNodePackage { name = "snyk"; packageName = "snyk"; - version = "1.639.0"; + version = "1.640.0"; src = fetchurl { - url = "https://registry.npmjs.org/snyk/-/snyk-1.639.0.tgz"; - sha512 = "kGmk2T9DoxxGrLDJX0PvXp0ktR0rb1PE5kD6mAsafqhvzfGbNCUJTtPPD/Wy/pbf5jAjHryFYX/KRW9bMXIFGQ=="; + url = "https://registry.npmjs.org/snyk/-/snyk-1.640.0.tgz"; + sha512 = "cVBEX4+JxzqcIn/S726VYwbRXzERy/KBxeu9LE1b/WSDe0SNX6ejOl8LGORCk0No2RIJLLAgkmrBZSeSS+AeHw=="; }; dependencies = [ sources."@arcanis/slice-ansi-1.0.2" @@ -118550,4 +118569,42 @@ in bypassCache = true; reconstructLock = true; }; + zx = nodeEnv.buildNodePackage { + name = "zx"; + packageName = "zx"; + version = "1.14.2"; + src = fetchurl { + url = "https://registry.npmjs.org/zx/-/zx-1.14.2.tgz"; + sha512 = "omgqRVve+5dqbFrogFSjJXLUCUr4xHF2Gan+Njn/z4fumhIj3tMTFEA9iV+HgiobZ5Mgl5N96z4S4fwhaas4Pw=="; + }; + dependencies = [ + sources."@types/node-15.12.4" + sources."@types/node-fetch-2.5.10" + sources."ansi-styles-4.3.0" + sources."asynckit-0.4.0" + sources."chalk-4.1.1" + sources."color-convert-2.0.1" + sources."color-name-1.1.4" + sources."combined-stream-1.0.8" + sources."delayed-stream-1.0.0" + sources."form-data-3.0.1" + sources."has-flag-4.0.0" + sources."isexe-2.0.0" + sources."mime-db-1.48.0" + sources."mime-types-2.1.31" + sources."node-fetch-2.6.1" + sources."shq-1.0.2" + sources."supports-color-7.2.0" + sources."which-2.0.2" + ]; + buildInputs = globalBuildInputs; + meta = { + description = "A tool for writing better scripts"; + homepage = "https://github.com/google/zx#readme"; + license = "Apache-2.0"; + }; + production = true; + bypassCache = true; + reconstructLock = true; + }; } diff --git a/pkgs/development/octave-modules/arduino/default.nix b/pkgs/development/octave-modules/arduino/default.nix index f6536108e6c..77089827c4b 100644 --- a/pkgs/development/octave-modules/arduino/default.nix +++ b/pkgs/development/octave-modules/arduino/default.nix @@ -7,11 +7,11 @@ buildOctavePackage rec { pname = "arduino"; - version = "0.6.0"; + version = "0.7.0"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0fnfk206n31s7diijaylmqhxnr88z6l3l3vsxq4z8gcp9ylm9nkj"; + sha256 = "0r0bcq2zkwba6ab6yi6czbhrj4adm9m9ggxmzzcd9h40ckqg6wjv"; }; requiredOctavePackages = [ diff --git a/pkgs/development/octave-modules/communications/default.nix b/pkgs/development/octave-modules/communications/default.nix index 492c837255f..6c517ec6e5b 100644 --- a/pkgs/development/octave-modules/communications/default.nix +++ b/pkgs/development/octave-modules/communications/default.nix @@ -7,11 +7,11 @@ buildOctavePackage rec { pname = "communications"; - version = "1.2.2"; + version = "1.2.3"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "1xay2vjyadv3ja8dmqqzm2his8s0rvidz23nq1c2yl3xh1gavyck"; + sha256 = "1r4r0cia5l5fann1n78c1qdc6q8nizgb09n2fdwb76xnwjan23g3"; }; buildInputs = [ diff --git a/pkgs/development/octave-modules/control/default.nix b/pkgs/development/octave-modules/control/default.nix index 2d61e30cc60..b69343b1b4b 100644 --- a/pkgs/development/octave-modules/control/default.nix +++ b/pkgs/development/octave-modules/control/default.nix @@ -7,11 +7,11 @@ buildOctavePackage rec { pname = "control"; - version = "3.2.0"; + version = "3.3.0"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0gjyjsxs01x0nyc4cgn3d5af17l3lzs8h4hsm57nxd3as48dbwgs"; + sha256 = "1yksifligq2z3siqw701iq2ydgnj7pnkcw42bfmydcf6fc4drlvy"; }; nativeBuildInputs = [ diff --git a/pkgs/development/octave-modules/fuzzy-logic-toolkit/default.nix b/pkgs/development/octave-modules/fuzzy-logic-toolkit/default.nix index 5cb567b2bb8..dc230ef18a8 100644 --- a/pkgs/development/octave-modules/fuzzy-logic-toolkit/default.nix +++ b/pkgs/development/octave-modules/fuzzy-logic-toolkit/default.nix @@ -5,11 +5,11 @@ buildOctavePackage rec { pname = "fuzzy-logic-toolkit"; - version = "0.4.5"; + version = "0.4.6"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0cs1xh594h1psdinicxrsvm27gzax5jja7bjk4sl3kk2hv24mhml"; + sha256 = "126x0wjjqmwwgynsgjfdh5rlnww5bsl5hxq1xib15i58mrglh5cd"; }; meta = with lib; { diff --git a/pkgs/development/octave-modules/instrument-control/default.nix b/pkgs/development/octave-modules/instrument-control/default.nix index 51c8f300cc5..17d9186da74 100644 --- a/pkgs/development/octave-modules/instrument-control/default.nix +++ b/pkgs/development/octave-modules/instrument-control/default.nix @@ -5,11 +5,11 @@ buildOctavePackage rec { pname = "instrument-control"; - version = "0.6.0"; + version = "0.7.0"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0vckax6rx5v3fq5j6kb6n39a5zas9i24x4wvmjlhc8xbykkg5nkk"; + sha256 = "0cdnnbxihz7chdkhkcgy46pvkij43z9alwr88627z7jaiaah6xby"; }; meta = with lib; { diff --git a/pkgs/development/octave-modules/matgeom/default.nix b/pkgs/development/octave-modules/matgeom/default.nix index b8607cf5dff..c74b8b00cfb 100644 --- a/pkgs/development/octave-modules/matgeom/default.nix +++ b/pkgs/development/octave-modules/matgeom/default.nix @@ -5,11 +5,11 @@ buildOctavePackage rec { pname = "matgeom"; - version = "1.2.2"; + version = "1.2.3"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "05xfmlh1k3mhq8yag7gr8q1ysl1s43vm46fr1i3gcg9b1kkwi8by"; + sha256 = "12q66dy4ninhki3jslzcamfblcb3cdkfbbzn3a5har1s212lsfiw"; }; meta = with lib; { diff --git a/pkgs/development/octave-modules/nan/default.nix b/pkgs/development/octave-modules/nan/default.nix index a0517db714b..f492d4440b1 100644 --- a/pkgs/development/octave-modules/nan/default.nix +++ b/pkgs/development/octave-modules/nan/default.nix @@ -6,11 +6,11 @@ buildOctavePackage rec { pname = "nan"; - version = "3.5.2"; + version = "3.5.3"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0bp8zl50f8qj5sivl88kjdswm035v4li33fiq3v1gmh0pvgbcw7a"; + sha256 = "1jailahbrh847875vszibn68lp4n5sdy68q51i7hd64qix8rmmpx"; }; buildInputs = [ diff --git a/pkgs/development/octave-modules/nurbs/default.nix b/pkgs/development/octave-modules/nurbs/default.nix index e5e26d7bb95..fbd67a0a46a 100644 --- a/pkgs/development/octave-modules/nurbs/default.nix +++ b/pkgs/development/octave-modules/nurbs/default.nix @@ -5,22 +5,13 @@ buildOctavePackage rec { pname = "nurbs"; - version = "1.3.13"; + version = "1.4.3"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0zkyldm63pc3pcal3yvj6af24cvpjvv9qfhf0ihhwcsh4w3yggyv"; + sha256 = "16r05av75nvmkz1knf0nv0gj4fcjjf3jnyf94bdgxf84wahncim7"; }; - # Has been fixed in more recent commits, but has not been pushed out as a - # new version yet. - # The sed changes allow nurbs to compile. - patchPhase = '' - sed -i s/feval/octave::feval/g src/*.cc - sed -i s/is_real_type/isreal/g src/*.cc - sed -i s/is_cell/iscell/g src/*.cc - ''; - meta = with lib; { homepage = "https://octave.sourceforge.io/nurbs/index.html"; license = licenses.gpl3Plus; diff --git a/pkgs/development/octave-modules/optim/default.nix b/pkgs/development/octave-modules/optim/default.nix index b9561faafb1..57a606d3d58 100644 --- a/pkgs/development/octave-modules/optim/default.nix +++ b/pkgs/development/octave-modules/optim/default.nix @@ -9,11 +9,11 @@ buildOctavePackage rec { pname = "optim"; - version = "1.6.0"; + version = "1.6.1"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "1z2h8gy99glxh5qi3r22am2vdirlbklkq0lx4r8jrx1ak7awh47r"; + sha256 = "1175bckiryz0i6zm8zvq7y5rq3lwkmhyiky1gbn33np9qzxcsl3i"; }; buildInputs = [ diff --git a/pkgs/development/octave-modules/parallel/default.nix b/pkgs/development/octave-modules/parallel/default.nix index 0ea1d4d9df2..11fba7d3630 100644 --- a/pkgs/development/octave-modules/parallel/default.nix +++ b/pkgs/development/octave-modules/parallel/default.nix @@ -8,11 +8,11 @@ buildOctavePackage rec { pname = "parallel"; - version = "4.0.0"; + version = "4.0.1"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0wmpak01rsccrnb8is7fsjdlxw15157sqyf9s2fabr16yykfmvi8"; + sha256 = "1h8vw2r42393px6dk10y3lhpxl168r9d197f9whz6lbk2rg571pa"; }; nativeBuildInputs = [ diff --git a/pkgs/development/octave-modules/splines/default.nix b/pkgs/development/octave-modules/splines/default.nix index 69d5e46147d..9a249c46744 100644 --- a/pkgs/development/octave-modules/splines/default.nix +++ b/pkgs/development/octave-modules/splines/default.nix @@ -5,11 +5,11 @@ buildOctavePackage rec { pname = "splines"; - version = "1.3.3"; + version = "1.3.4"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "16wisph8axc5xci0h51zj0y0x2wj6c9zybi2sjpb9v8z9dagjjqa"; + sha256 = "11a34f6a7615fc8x1smk3lx8vslilx4mrxi8f01la3wq68khnq5f"; }; meta = with lib; { diff --git a/pkgs/development/octave-modules/struct/default.nix b/pkgs/development/octave-modules/struct/default.nix index a69a8e4b6e2..bd173aab1e3 100644 --- a/pkgs/development/octave-modules/struct/default.nix +++ b/pkgs/development/octave-modules/struct/default.nix @@ -5,11 +5,11 @@ buildOctavePackage rec { pname = "struct"; - version = "1.0.16"; + version = "1.0.17"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "0gx20r126f0ccl4yflp823xi77p8fh4acx1fv0mmcsglmx4c4vgm"; + sha256 = "0cw4cspkm553v019zsj2bsmal0i378pm0hv29w82j3v5vysvndq1"; }; meta = with lib; { diff --git a/pkgs/development/octave-modules/windows/default.nix b/pkgs/development/octave-modules/windows/default.nix index 274ba1e3b7d..bed63aef926 100644 --- a/pkgs/development/octave-modules/windows/default.nix +++ b/pkgs/development/octave-modules/windows/default.nix @@ -5,11 +5,11 @@ buildOctavePackage rec { pname = "windows"; - version = "1.5.0"; + version = "1.6.1"; src = fetchurl { url = "mirror://sourceforge/octave/${pname}-${version}.tar.gz"; - sha256 = "05bsf3q816b9vwgmjdm761ybhmk8raq6dzxqvd11brma0granx3a"; + sha256 = "110dh6jz088c4fxp9gw79kfib0dl7r3rkcavxx4xpk7bjl2l3xb6"; }; meta = with lib; { diff --git a/pkgs/development/python-modules/auth0-python/default.nix b/pkgs/development/python-modules/auth0-python/default.nix index 10ad9c5a301..67701afc0eb 100644 --- a/pkgs/development/python-modules/auth0-python/default.nix +++ b/pkgs/development/python-modules/auth0-python/default.nix @@ -1,10 +1,10 @@ { lib , buildPythonPackage , fetchPypi -, requests , mock , pyjwt , pytestCheckHook +, requests }: buildPythonPackage rec { @@ -13,7 +13,7 @@ buildPythonPackage rec { src = fetchPypi { inherit pname version; - sha256 = "4a5a709a5d460ddc406783fa567d9baebba94687e2387be6405dba97482d4c93"; + sha256 = "sha256-Slpwml1GDdxAZ4P6Vn2brrupRofiOHvmQF26l0gtTJM="; }; propagatedBuildInputs = [ @@ -23,23 +23,21 @@ buildPythonPackage rec { checkInputs = [ mock + pyjwt pytestCheckHook ]; - pytestFlagsArray = [ - # jwt package is not available in nixpkgs - "--ignore=auth0/v3/test/authentication/test_token_verifier.py" - ]; - - # tries to ping websites (e.g. google.com) disabledTests = [ + # tries to ping websites (e.g. google.com) "can_timeout" ]; + pythonImportsCheck = [ "auth0" ]; + meta = with lib; { description = "Auth0 Python SDK"; homepage = "https://github.com/auth0/auth0-python"; license = licenses.mit; - maintainers = [ maintainers.costrouc ]; + maintainers = with maintainers; [ costrouc ]; }; } diff --git a/pkgs/development/python-modules/dask/default.nix b/pkgs/development/python-modules/dask/default.nix index 55ba3ad6ba7..b51ac1701a2 100644 --- a/pkgs/development/python-modules/dask/default.nix +++ b/pkgs/development/python-modules/dask/default.nix @@ -2,7 +2,6 @@ , stdenv , bokeh , buildPythonPackage -, fetchpatch , fetchFromGitHub , fsspec , pytestCheckHook @@ -21,14 +20,14 @@ buildPythonPackage rec { pname = "dask"; - version = "2021.03.0"; + version = "2021.06.1"; disabled = pythonOlder "3.5"; src = fetchFromGitHub { owner = "dask"; repo = pname; rev = version; - sha256 = "LACv7lWpQULQknNGX/9vH9ckLsypbqKDGnsNBgKT1eI="; + sha256 = "sha256-wrUqLSmlKhd0NSjWBwbow8aX53ZBTgl2n4lEmvxC3bs="; }; propagatedBuildInputs = [ @@ -54,16 +53,6 @@ buildPythonPackage rec { dontUseSetuptoolsCheck = true; - patches = [ - # dask dataframe cannot be imported in sandboxed builds - # See https://github.com/dask/dask/pull/7601 - (fetchpatch { - url = "https://github.com/dask/dask/commit/9ce5b0d258cecb3ef38fd844135ad1f7ac3cea5f.patch"; - sha256 = "sha256-1EVRYwAdTSEEH9jp+UOnrijzezZN3iYR6q6ieYJM3kY="; - name = "fix-dask-dataframe-imports-in-sandbox.patch"; - }) - ]; - postPatch = '' # versioneer hack to set version of github package echo "def get_versions(): return {'dirty': False, 'error': None, 'full-revisionid': None, 'version': '${version}'}" > dask/_version.py @@ -82,6 +71,12 @@ buildPythonPackage rec { # this test requires features of python3Packages.psutil that are # blocked in sandboxed-builds "test_auto_blocksize_csv" + ] ++ [ + # A deprecation warning from newer sqlalchemy versions makes these tests + # to fail https://github.com/dask/dask/issues/7406 + "test_sql" + # Test interrupt fails intermittently https://github.com/dask/dask/issues/2192 + "test_interrupt" ]; __darwinAllowLocalNetworking = true; diff --git a/pkgs/development/python-modules/databases/default.nix b/pkgs/development/python-modules/databases/default.nix index 3a1da0697c0..98e047836d0 100644 --- a/pkgs/development/python-modules/databases/default.nix +++ b/pkgs/development/python-modules/databases/default.nix @@ -1,6 +1,7 @@ { lib , buildPythonPackage , fetchFromGitHub +, fetchpatch , sqlalchemy , aiocontextvars , isPy27 @@ -23,6 +24,18 @@ buildPythonPackage rec { sha256 = "0aq88k7d9036cy6qvlfv9p2dxd6p6fic3j0az43gn6k1ardhdsgf"; }; + patches = [ + # sqlalchemy 1.4 compat, https://github.com/encode/databases/pull/299 + (fetchpatch { + url = "https://github.com/encode/databases/commit/9d6e0c024833bd41421f0798a94ef2bbf27a31d5.patch"; + sha256 = "0wz9dz6g88ifvvwlhy249cjvqpx72x99wklzcl7b23srpcvb5gv1"; + }) + (fetchpatch { + url = "https://github.com/encode/databases/commit/40c41c2b7b3fedae484ad94d81b27ce88a09c5ed.patch"; + sha256 = "0z458l3vkg4faxbnf31lszfby5d10fa9kgxxy4xxcm0py6d8a2pi"; + }) + ]; + propagatedBuildInputs = [ aiocontextvars sqlalchemy diff --git a/pkgs/development/python-modules/datashader/default.nix b/pkgs/development/python-modules/datashader/default.nix index 17070acaa55..5738dc64e75 100644 --- a/pkgs/development/python-modules/datashader/default.nix +++ b/pkgs/development/python-modules/datashader/default.nix @@ -28,7 +28,7 @@ buildPythonPackage rec { src = fetchPypi { inherit pname version; - sha256 = "e89b1c1e6d508c399738b2daf37aa102f63fc70be53cce9db90d654b19c2555f"; + sha256 = "sha256-6JscHm1QjDmXOLLa83qhAvY/xwvlPM6duQ1lSxnCVV8="; }; propagatedBuildInputs = [ diff --git a/pkgs/development/python-modules/distributed/default.nix b/pkgs/development/python-modules/distributed/default.nix index 0daa4658051..605e905d4ab 100644 --- a/pkgs/development/python-modules/distributed/default.nix +++ b/pkgs/development/python-modules/distributed/default.nix @@ -26,7 +26,7 @@ buildPythonPackage rec { # get full repository need conftest.py to run tests src = fetchPypi { inherit pname version; - sha256 = "67bf61fd6022a397625f69b20a1c7c1cf0167b6441e008f0ed86dc8785d46057"; + sha256 = "sha256-Z79h/WAio5diX2myChx8HPAWe2RB4Ajw7Ybch4XUYFc="; }; propagatedBuildInputs = [ diff --git a/pkgs/development/python-modules/hvac/default.nix b/pkgs/development/python-modules/hvac/default.nix index ea221bc0d99..70cd9ca5abd 100644 --- a/pkgs/development/python-modules/hvac/default.nix +++ b/pkgs/development/python-modules/hvac/default.nix @@ -1,4 +1,10 @@ -{ lib, buildPythonPackage, fetchPypi, requests, six }: +{ lib +, buildPythonPackage +, fetchPypi +, pyhcl +, requests +, six +}: buildPythonPackage rec { pname = "hvac"; @@ -6,10 +12,14 @@ buildPythonPackage rec { src = fetchPypi { inherit pname version; - sha256 = "0c616f29d6642adaabcd408a04469374ed83be12b24501bb337e8f37badfef22"; + sha256 = "sha256-DGFvKdZkKtqrzUCKBEaTdO2DvhKyRQG7M36PN7rf7yI="; }; - propagatedBuildInputs = [ requests six ]; + propagatedBuildInputs = [ + pyhcl + requests + six + ]; # Requires running a Vault server doCheck = false; @@ -20,5 +30,6 @@ buildPythonPackage rec { description = "HashiCorp Vault API client"; homepage = "https://github.com/ianunruh/hvac"; license = licenses.asl20; + maintainers = with maintainers; [ ]; }; } diff --git a/pkgs/development/python-modules/intake/default.nix b/pkgs/development/python-modules/intake/default.nix index 41207295a2c..fff6d74b56a 100644 --- a/pkgs/development/python-modules/intake/default.nix +++ b/pkgs/development/python-modules/intake/default.nix @@ -73,6 +73,7 @@ buildPythonPackage rec { # broken test "test_read_pattern" + "test_remote_arr" ]; meta = with lib; { diff --git a/pkgs/development/python-modules/ncclient/default.nix b/pkgs/development/python-modules/ncclient/default.nix index e865c7a7367..010e2a5bae3 100644 --- a/pkgs/development/python-modules/ncclient/default.nix +++ b/pkgs/development/python-modules/ncclient/default.nix @@ -1,34 +1,34 @@ { lib , buildPythonPackage -, fetchPypi +, fetchFromGitHub , paramiko , selectors2 , lxml -, nose -, rednose +, pytestCheckHook }: buildPythonPackage rec { pname = "ncclient"; version = "0.6.12"; - src = fetchPypi { - inherit pname version; - sha256 = "37c8a9f9a44f0346144119ab17ae6559e44b5a991f4c34ea3765c678079e4beb"; + src = fetchFromGitHub { + owner = pname; + repo = pname; + rev = "v${version}"; + sha256 = "1sjvqaxb54nmqljiw5bg1423msa9rg015wiix9fsm6djk3wpklmk"; }; - checkInputs = [ nose rednose ]; - propagatedBuildInputs = [ - paramiko lxml selectors2 + paramiko + lxml + selectors2 ]; - checkPhase = '' - nosetests test --rednose --verbosity=3 --with-coverage --cover-package ncclient - ''; + checkInputs = [ + pytestCheckHook + ]; - #Unfortunately the test hangs at te end - doCheck = false; + pythonImportsCheck = [ "ncclient" ]; meta = with lib; { homepage = "https://github.com/ncclient/ncclient"; diff --git a/pkgs/development/python-modules/pg8000/default.nix b/pkgs/development/python-modules/pg8000/default.nix index 80bac373894..5560e918ac4 100644 --- a/pkgs/development/python-modules/pg8000/default.nix +++ b/pkgs/development/python-modules/pg8000/default.nix @@ -13,7 +13,7 @@ buildPythonPackage rec { src = fetchPypi { inherit pname version; - sha256 = "dcb9afb9cb87acc79388ae633c45cf7f806aabe3bb5d8cf154572b699393f937"; + sha256 = "sha256-3LmvucuHrMeTiK5jPEXPf4Bqq+O7XYzxVFcraZOT+Tc="; }; propagatedBuildInputs = [ diff --git a/pkgs/development/python-modules/privacyidea/fix-tests.patch b/pkgs/development/python-modules/privacyidea/fix-tests.patch deleted file mode 100644 index 67c22d2052e..00000000000 --- a/pkgs/development/python-modules/privacyidea/fix-tests.patch +++ /dev/null @@ -1,28 +0,0 @@ -diff --git a/privacyidea/lib/resolvers/LDAPIdResolver.py b/privacyidea/lib/resolvers/LDAPIdResolver.py -index ae9d87764..cfc609931 100644 ---- a/privacyidea/lib/resolvers/LDAPIdResolver.py -+++ b/privacyidea/lib/resolvers/LDAPIdResolver.py -@@ -97,11 +97,6 @@ - SERVERPOOL_ROUNDS = 2 - # The number of seconds a non-responding server is removed from the server pool - SERVERPOOL_SKIP = 30 --# The number of seconds that ldap3 waits if no server is left in the pool, before --# starting the next round --pooling_loop_timeout = get_app_config_value("PI_LDAP_POOLING_LOOP_TIMEOUT", 10) --log.info("Setting system wide POOLING_LOOP_TIMEOUT to {0!s}.".format(pooling_loop_timeout)) --ldap3.set_config_parameter("POOLING_LOOP_TIMEOUT", pooling_loop_timeout) - - # 1 sec == 10^9 nano secs == 10^7 * (100 nano secs) - MS_AD_MULTIPLYER = 10 ** 7 -@@ -314,6 +309,11 @@ def __init__(self): - self.serverpool_rounds = SERVERPOOL_ROUNDS - self.serverpool_skip = SERVERPOOL_SKIP - self.serverpool = None -+ # The number of seconds that ldap3 waits if no server is left in the pool, before -+ # starting the next round -+ pooling_loop_timeout = get_app_config_value("PI_LDAP_POOLING_LOOP_TIMEOUT", 10) -+ log.info("Setting system wide POOLING_LOOP_TIMEOUT to {0!s}.".format(pooling_loop_timeout)) -+ ldap3.set_config_parameter("POOLING_LOOP_TIMEOUT", pooling_loop_timeout) - - def checkPass(self, uid, password): - """ diff --git a/pkgs/development/python-modules/python-ethtool/default.nix b/pkgs/development/python-modules/python-ethtool/default.nix new file mode 100644 index 00000000000..03c14739706 --- /dev/null +++ b/pkgs/development/python-modules/python-ethtool/default.nix @@ -0,0 +1,34 @@ +{ lib +, buildPythonPackage +, fetchFromGitHub +, pkg-config +, libnl +, nettools +}: + +buildPythonPackage rec { + pname = "python-ethtool"; + version = "0.14"; + + src = fetchFromGitHub { + owner = "fedora-python"; + repo = pname; + rev = "v${version}"; + sha256 = "sha256-Sp7ssfLZ/1FEKrvX257pKcaureZ5mdpJ7jCEh/ft1l0="; + }; + + postPatch = '' + substituteInPlace tests/parse_ifconfig.py --replace "Popen('ifconfig'," "Popen('${nettools}/bin/ifconfig'," + ''; + + buildInputs = [ libnl ]; + nativeBuildInputs = [ pkg-config ]; + pythonImportsCheck = [ "ethtool" ]; + + meta = with lib; { + description = "Python bindings for the ethtool kernel interface"; + homepage = "https://github.com/fedora-python/python-ethtool"; + license = licenses.gpl2Plus; + maintainers = with maintainers; [ elohmeier ]; + }; +} diff --git a/pkgs/development/python-modules/python-linux-procfs/default.nix b/pkgs/development/python-modules/python-linux-procfs/default.nix new file mode 100644 index 00000000000..702be64075a --- /dev/null +++ b/pkgs/development/python-modules/python-linux-procfs/default.nix @@ -0,0 +1,25 @@ +{ lib, buildPythonPackage, fetchgit, six }: + +buildPythonPackage rec { + pname = "python-linux-procfs"; + version = "0.6.3"; + + src = fetchgit { + url = "https://git.kernel.org/pub/scm/libs/python/${pname}/${pname}.git"; + rev = "v${version}"; + sha256 = "sha256-PPgMlL9oj4HYUsr444ZrGo1LSZBl9hL5SE98IASUpbc="; + }; + + propagatedBuildInputs = [ six ]; + + # contains no tests + doCheck = false; + pythonImportsCheck = [ "procfs" ]; + + meta = with lib; { + description = "Python classes to extract information from the Linux kernel /proc files"; + homepage = "https://git.kernel.org/pub/scm/libs/python/python-linux-procfs/python-linux-procfs.git/"; + license = licenses.gpl2Plus; + maintainers = with maintainers; [ elohmeier ]; + }; +} diff --git a/pkgs/development/python-modules/streamz/default.nix b/pkgs/development/python-modules/streamz/default.nix index 62e71bd2fd1..2b327174524 100644 --- a/pkgs/development/python-modules/streamz/default.nix +++ b/pkgs/development/python-modules/streamz/default.nix @@ -1,4 +1,7 @@ -{ lib, buildPythonPackage, fetchPypi +{ lib +, buildPythonPackage +, fetchPypi +, fetchpatch , confluent-kafka , distributed , flaky @@ -22,6 +25,14 @@ buildPythonPackage rec { sha256 = "04446ece273c041506b1642bd3d8380367a8372196be4d6d6d03faafadc590b2"; }; + patches = [ + # Fix apply import from dask + (fetchpatch { + url = "https://patch-diff.githubusercontent.com/raw/python-streamz/streamz/pull/423.patch"; + sha256 = "sha256-CR+uRvzaFu9WQ633tbvX3gAnudhlVN6VvmxKiR37diw="; + }) + ]; + propagatedBuildInputs = [ networkx tornado @@ -46,6 +57,7 @@ buildPythonPackage rec { checkPhase = '' pytest --deselect=streamz/tests/test_sources.py::test_tcp_async \ --deselect=streamz/tests/test_sources.py::test_tcp \ + --deselect=streamz/tests/test_core.py::test_partition_timeout \ --ignore=streamz/tests/test_kafka.py ''; diff --git a/pkgs/development/python-modules/sunpy/default.nix b/pkgs/development/python-modules/sunpy/default.nix index 84728223642..987523ed42b 100644 --- a/pkgs/development/python-modules/sunpy/default.nix +++ b/pkgs/development/python-modules/sunpy/default.nix @@ -31,12 +31,12 @@ buildPythonPackage rec { pname = "sunpy"; - version = "2.1.5"; + version = "3.0.0"; disabled = pythonOlder "3.6"; src = fetchPypi { inherit pname version; - sha256 = "df46101107b248577483d88e547badfc041dcbf6932bdc82004c4b3ee958baff"; + sha256 = "sha256-N/DAvnO+S9E4tndEWpiG84P3FCFwxYNdGFxbxUVsTx8="; }; nativeBuildInputs = [ @@ -74,9 +74,12 @@ buildPythonPackage rec { # darwin has write permission issues doCheck = stdenv.isLinux; + # ignore documentation tests checkPhase = '' - PY_IGNORE_IMPORTMISMATCH=1 HOME=$(mktemp -d) pytest sunpy -k 'not rst' + PY_IGNORE_IMPORTMISMATCH=1 HOME=$(mktemp -d) pytest sunpy -k 'not rst' \ + --deselect=sunpy/tests/tests/test_self_test.py::test_main_nonexisting_module \ + --deselect=sunpy/tests/tests/test_self_test.py::test_main_stdlib_module ''; meta = with lib; { diff --git a/pkgs/development/python-modules/wxPython/4.0.nix b/pkgs/development/python-modules/wxPython/4.0.nix index 2fc9a98a26f..3a86ef4c639 100644 --- a/pkgs/development/python-modules/wxPython/4.0.nix +++ b/pkgs/development/python-modules/wxPython/4.0.nix @@ -18,6 +18,8 @@ , AudioToolbox , OpenGL , CoreFoundation +, pillow +, numpy }: buildPythonPackage rec { @@ -42,6 +44,8 @@ buildPythonPackage rec { [ wxGTK.gtk ] ); + propagatedBuildInputs = [ pillow numpy ]; + DOXYGEN = "${doxygen}/bin/doxygen"; preConfigure = lib.optionalString (!stdenv.isDarwin) '' diff --git a/pkgs/development/python-modules/wxPython/4.1.nix b/pkgs/development/python-modules/wxPython/4.1.nix index a86e07729d9..89796500e04 100644 --- a/pkgs/development/python-modules/wxPython/4.1.nix +++ b/pkgs/development/python-modules/wxPython/4.1.nix @@ -11,6 +11,8 @@ , ncurses , pango , wxGTK +, pillow +, numpy }: let dynamic-linker = stdenv.cc.bintools.dynamicLinker; @@ -36,6 +38,8 @@ buildPythonPackage rec { ncurses ]; + propagatedBuildInputs = [ pillow numpy ]; + DOXYGEN = "${doxygen}/bin/doxygen"; preConfigure = lib.optionalString (!stdenv.isDarwin) '' diff --git a/pkgs/development/tools/build-managers/qbs/default.nix b/pkgs/development/tools/build-managers/qbs/default.nix index 7e46e39b438..d2d382f28d3 100644 --- a/pkgs/development/tools/build-managers/qbs/default.nix +++ b/pkgs/development/tools/build-managers/qbs/default.nix @@ -3,13 +3,13 @@ stdenv.mkDerivation rec { pname = "qbs"; - version = "1.18.0"; + version = "1.19.1"; src = fetchFromGitHub { owner = "qbs"; repo = "qbs"; rev = "v${version}"; - sha256 = "sha256-W1ky3PWPzfKygY+diBld+BqTAxJvNw9mqw3owcQ6no4="; + sha256 = "sha256-td+xXxpjty5jgorlVySG+8yUd9hujInXIlCfqCRUg9k="; }; nativeBuildInputs = [ qmake ]; diff --git a/pkgs/development/tools/continuous-integration/fly/default.nix b/pkgs/development/tools/continuous-integration/fly/default.nix index a4769b10b35..22b7752c593 100644 --- a/pkgs/development/tools/continuous-integration/fly/default.nix +++ b/pkgs/development/tools/continuous-integration/fly/default.nix @@ -2,13 +2,13 @@ buildGoModule rec { pname = "fly"; - version = "7.3.1"; + version = "7.3.2"; src = fetchFromGitHub { owner = "concourse"; repo = "concourse"; rev = "v${version}"; - sha256 = "sha256-JtzJDbln+n05oJjA/ydZWaH4dIPLL/ZsNg+Gr+YBcng="; + sha256 = "sha256-ID/vqkFzKHLeuojHUxUFYURn+Dxb78XwxfJVV+S130A="; }; vendorSha256 = "sha256-30rrRkPIH0sr8koKRLs1Twe6Z55+lr9gkgUDrY+WOTw="; diff --git a/pkgs/games/widelands/default.nix b/pkgs/games/widelands/default.nix index 8b96dcc04e2..f094c7cd596 100644 --- a/pkgs/games/widelands/default.nix +++ b/pkgs/games/widelands/default.nix @@ -1,52 +1,90 @@ -{ lib, stdenv, fetchurl, cmake, python, gettext -, boost, libpng, zlib, glew, lua, doxygen, icu -, SDL2, SDL2_image, SDL2_mixer, SDL2_net, SDL2_ttf +{ lib +, stdenv +, fetchFromGitHub +, SDL2 +, SDL2_image +, SDL2_mixer +, SDL2_net +, SDL2_ttf +, boost +, cmake +, curl +, doxygen +, gettext +, glew +, graphviz +, icu +, installShellFiles +, libpng +, lua +, python3 +, zlib }: stdenv.mkDerivation rec { pname = "widelands"; - version = "21"; + version = "1.0"; - meta = with lib; { - description = "RTS with multiple-goods economy"; - homepage = "http://widelands.org/"; - longDescription = '' - Widelands is a real time strategy game based on "The Settlers" and "The - Settlers II". It has a single player campaign mode, as well as a networked - multiplayer mode. - ''; - license = licenses.gpl2Plus; - platforms = platforms.linux; - maintainers = with maintainers; [ raskin jcumming ]; - hydraPlatforms = []; + src = fetchFromGitHub { + owner = "widelands"; + repo = "widelands"; + rev = "v${version}"; + sha256 = "sha256-gNumYoeKePaxiAzrqEPKibMxFwv9vyBrCSoua+MKhcM="; }; - patches = [ - ./bincmake.patch - ]; - - src = fetchurl { - url = "https://launchpad.net/widelands/build${version}/build${version}/+download/widelands-build${version}-source.tar.gz"; - sha256 = "sha256-YB4OTG+Rs/sOzizRuD7PsCNEobkZT7tw7z9w4GmU41c="; - }; + patches = [ ./bincmake.patch ]; - preConfigure = '' - cmakeFlags=" - -DWL_INSTALL_BASEDIR=$out - -DWL_INSTALL_DATADIR=$out/share/widelands - -DWL_INSTALL_BINARY=$out/bin - " + postPatch = '' + substituteInPlace xdg/org.widelands.Widelands.desktop \ + --replace 'Exec=widelands' "Exec=$out/bin/widelands" ''; - nativeBuildInputs = [ cmake python gettext ]; + cmakeFlags = [ + "-Wno-dev" # dev warnings are only needed for upstream development + "-DWL_INSTALL_BASEDIR=${placeholder "out"}" + "-DWL_INSTALL_DATADIR=${placeholder "out"}/share/widelands" + "-DWL_INSTALL_BINARY=${placeholder "out"}/bin" + ]; + + nativeBuildInputs = [ cmake doxygen gettext graphviz installShellFiles ]; buildInputs = [ - boost libpng zlib glew lua doxygen icu - SDL2 SDL2_image SDL2_mixer SDL2_net SDL2_ttf + SDL2 + SDL2_image + SDL2_mixer + SDL2_net + SDL2_ttf + boost + curl + glew + icu + libpng + lua + python3 + zlib ]; postInstall = '' - mkdir -p "$out/share/applications/" - cp -v "../xdg/org.widelands.Widelands.desktop" "$out/share/applications/" + install -Dm444 -t $out/share/applications ../xdg/org.widelands.Widelands.desktop + + for s in 16 32 48 64 128; do + install -Dm444 ../data/images/logos/wl-ico-''${s}.png $out/share/icons/hicolor/''${s}x''${s}/org.widelands.Widelands.png + done + + installManPage ../xdg/widelands.6 ''; + + meta = with lib; { + description = "RTS with multiple-goods economy"; + homepage = "https://widelands.org/"; + longDescription = '' + Widelands is a real time strategy game based on "The Settlers" and "The + Settlers II". It has a single player campaign mode, as well as a networked + multiplayer mode. + ''; + license = licenses.gpl2Plus; + maintainers = with maintainers; [ raskin jcumming ]; + platforms = platforms.linux; + hydraPlatforms = [ ]; + }; } diff --git a/pkgs/os-specific/linux/tuna/default.nix b/pkgs/os-specific/linux/tuna/default.nix new file mode 100644 index 00000000000..0e621a24f08 --- /dev/null +++ b/pkgs/os-specific/linux/tuna/default.nix @@ -0,0 +1,62 @@ +{ lib +, buildPythonApplication +, fetchgit +, pygobject3 +, pytestCheckHook +, gdk-pixbuf +, glib +, gobject-introspection +, gtk3 +, python-linux-procfs +, python-ethtool +, wrapGAppsHook +}: + +buildPythonApplication rec { + pname = "tuna"; + version = "0.15"; + + src = fetchgit { + url = "https://git.kernel.org/pub/scm/utils/${pname}/${pname}.git"; + rev = "v${version}"; + sha256 = "sha256-lRHlbdCQ0NcjcWgLvCze67kN8NsK0f5RmKfPbkHhk78="; + }; + + patchPhase = '' + mv tuna-cmd.py tuna/cmd.py + + substituteInPlace setup.py \ + --replace 'packages = ["tuna", "tuna/gui"],' \ + 'packages = ["tuna", "tuna/gui"], entry_points={"console_scripts":["tuna=tuna.cmd:main"]},' + + substituteInPlace tuna/tuna_gui.py \ + --replace "self.binpath + 'pkexec'" "'/run/wrappers/bin/pkexec'" \ + --replace 'tuna_glade_dirs = [".", "tuna", "/usr/share/tuna"]' "tuna_glade_dirs = [ \"$out/share/tuna\" ]" + ''; + + nativeBuildInputs = [ + glib.dev + gobject-introspection + gtk3 + wrapGAppsHook + ]; + + propagatedBuildInputs = [ pygobject3 python-linux-procfs python-ethtool ]; + + postInstall = '' + mkdir -p $out/share/tuna + cp tuna/tuna_gui.glade $out/share/tuna/ + ''; + + # contains no tests + doCheck = false; + pythonImportsCheck = [ "tuna" ]; + + meta = with lib; { + description = "Thread and IRQ affinity setting GUI and cmd line tool"; + homepage = "https://git.kernel.org/pub/scm/utils/tuna/tuna.git"; + license = licenses.gpl2Plus; + platforms = platforms.linux; + maintainers = with maintainers; [ elohmeier ]; + }; +} diff --git a/pkgs/servers/consul/default.nix b/pkgs/servers/consul/default.nix index 874b18ef9eb..50845119599 100644 --- a/pkgs/servers/consul/default.nix +++ b/pkgs/servers/consul/default.nix @@ -2,7 +2,7 @@ buildGoModule rec { pname = "consul"; - version = "1.9.6"; + version = "1.9.7"; rev = "v${version}"; # Note: Currently only release tags are supported, because they have the Consul UI @@ -17,7 +17,7 @@ buildGoModule rec { owner = "hashicorp"; repo = pname; inherit rev; - sha256 = "sha256-SuG/Q5Tjet4etd4Qy5NBQLYEe2QO0K8QHKmgxYMl09U="; + sha256 = "sha256-+s7IwbklJ9QLe5ZagEe6+C0dx/Vvj0O5YaNUP25e9ZA="; }; passthru.tests.consul = nixosTests.consul; @@ -26,7 +26,7 @@ buildGoModule rec { # has a split module structure in one repo subPackages = ["." "connect/certgen"]; - vendorSha256 = "sha256-jVhj7pzJ8kxZk3ViA9zhVqD314biih/sP0Ql1GXcoRY="; + vendorSha256 = "sha256-HtuWfTtooD4/SzDp6yzNMI2nryOgy2e+lgz8q3M3vfw="; doCheck = false; diff --git a/pkgs/servers/miniflux/default.nix b/pkgs/servers/miniflux/default.nix index e69014c4f4a..f66468b240f 100644 --- a/pkgs/servers/miniflux/default.nix +++ b/pkgs/servers/miniflux/default.nix @@ -2,7 +2,7 @@ let pname = "miniflux"; - version = "2.0.29"; + version = "2.0.31"; in buildGoModule { inherit pname version; @@ -11,10 +11,10 @@ in buildGoModule { owner = pname; repo = pname; rev = version; - sha256 = "sha256-8FfI9TPtIoQ/D5AdKRy7fq/eGZ6ha8z0tqBnWcziMTA="; + sha256 = "sha256-01v5gwUv0SfX/9AJgo4HiBcmoCfQbnKIGcS26IebU2Q="; }; - vendorSha256 = "sha256-y7w+SHy0yPws365PKJeRStZS3Y5vjyPWHK3w84VvJsI="; + vendorSha256 = "sha256-69iTdrjgBmJHeVa8Tq47clQR5Xhy4rWcp2OwS4nIw/c="; nativeBuildInputs = [ installShellFiles ]; diff --git a/pkgs/servers/sabnzbd/default.nix b/pkgs/servers/sabnzbd/default.nix index 14aa161069c..3e2592bb093 100644 --- a/pkgs/servers/sabnzbd/default.nix +++ b/pkgs/servers/sabnzbd/default.nix @@ -20,26 +20,30 @@ let ]); path = lib.makeBinPath [ par2cmdline unrar unzip p7zip ]; in stdenv.mkDerivation rec { - version = "3.2.1"; + version = "3.3.1"; pname = "sabnzbd"; src = fetchFromGitHub { owner = pname; repo = pname; rev = version; - sha256 = "sha256-y2uaXa2DPZHBLukAdwKTwXauaJHX5Uft35vsthzGwME="; + sha256 = "sha256-OcasqRu6nh9hKepMbXVgZ49MeJTlWK+qPSkiBPgmYYo="; }; nativeBuildInputs = [ makeWrapper ]; buildInputs = [ pythonEnv ]; installPhase = '' + runHook preInstall + mkdir -p $out cp -R * $out/ mkdir $out/bin echo "${pythonEnv}/bin/python $out/SABnzbd.py \$*" > $out/bin/sabnzbd chmod +x $out/bin/sabnzbd wrapProgram $out/bin/sabnzbd --set PATH ${path} + + runHook postInstall ''; meta = with lib; { diff --git a/pkgs/tools/misc/elfcat/Cargo.lock b/pkgs/tools/misc/elfcat/Cargo.lock new file mode 100644 index 00000000000..e6c694bffb3 --- /dev/null +++ b/pkgs/tools/misc/elfcat/Cargo.lock @@ -0,0 +1,7 @@ +# This file is automatically @generated by Cargo. +# It is not intended for manual editing. +version = 3 + +[[package]] +name = "elfcat" +version = "0.1.3" diff --git a/pkgs/tools/misc/elfcat/default.nix b/pkgs/tools/misc/elfcat/default.nix new file mode 100644 index 00000000000..38b1cc9b64f --- /dev/null +++ b/pkgs/tools/misc/elfcat/default.nix @@ -0,0 +1,22 @@ +{ lib, rustPlatform, fetchFromGitHub }: + +rustPlatform.buildRustPackage rec { + pname = "elfcat"; + version = "0.1.3"; + + src = fetchFromGitHub { + owner = "ruslashev"; + repo = pname; + rev = version; + sha256 = "sha256-s56FyRoD2IhgdwEV63jMaB265CodHUlvmrWzmXAmonY="; + }; + + cargoLock.lockFile = ./Cargo.lock; + + meta = with lib; { + description = "ELF visualizer, generates HTML files from ELF binaries."; + homepage = "https://github.com/ruslashev/elfcat"; + license = licenses.zlib; + maintainers = with maintainers; [ fortuneteller2k ]; + }; +} diff --git a/pkgs/tools/misc/esphome/dashboard.nix b/pkgs/tools/misc/esphome/dashboard.nix index 3edf59002b3..215ce20c79d 100644 --- a/pkgs/tools/misc/esphome/dashboard.nix +++ b/pkgs/tools/misc/esphome/dashboard.nix @@ -4,13 +4,20 @@ with python3.pkgs; buildPythonPackage rec { pname = "esphome-dashboard"; - version = "20210615.0"; + version = "20210617.1"; src = fetchPypi { inherit pname version; - sha256 = "07ammr46bipfi4b7nnjkip5l7966wxqhp5n3g2wqf68m3ymx24s9"; + sha256 = "0kwg940pdzjsfbdmcml382khpxm6p1ip0bib0wk8rg8qdvmia7w5"; }; + # no tests + doCheck = false; + + pythonImportsCheck = [ + "esphome_dashboard" + ]; + meta = with lib; { description = "ESPHome dashboard"; homepage = "https://esphome.io/"; diff --git a/pkgs/tools/misc/esphome/default.nix b/pkgs/tools/misc/esphome/default.nix index 1daf4f139cf..c9de8abea95 100644 --- a/pkgs/tools/misc/esphome/default.nix +++ b/pkgs/tools/misc/esphome/default.nix @@ -12,13 +12,13 @@ let in python3.pkgs.buildPythonApplication rec { pname = "esphome"; - version = "1.19.0"; + version = "1.19.2"; src = fetchFromGitHub { owner = pname; repo = pname; rev = "v${version}"; - sha256 = "07brvpsy40jv30h0a0ywrw4bgwajjd37xznw34s8k53y92qs8lfi"; + sha256 = "0bz6gkrvn7mwmjsqrazgpy9r64m5jj462v0izgvdymkx8bjd8mpi"; }; postPatch = '' diff --git a/pkgs/tools/misc/notify/default.nix b/pkgs/tools/misc/notify/default.nix new file mode 100644 index 00000000000..0d7e6af8363 --- /dev/null +++ b/pkgs/tools/misc/notify/default.nix @@ -0,0 +1,37 @@ +{ lib +, buildGoModule +, fetchFromGitHub +}: + +buildGoModule rec { + pname = "notify"; + version = "0.0.2"; + + src = fetchFromGitHub { + owner = "projectdiscovery"; + repo = pname; + rev = "v${version}"; + sha256 = "1nlsl4himxs5jv0fcd48jkwjnmn1w3alp0dcm1awmp6702zrsgqj"; + }; + + vendorSha256 = "13dz0sk3561hrixsl1ghr9y0pzap2a8zrlbzzb7zs7550snbdcyg"; + + modRoot = "."; + subPackages = [ + "cmd/notify/" + ]; + + # Test files are not part of the release tarball + doCheck = false; + + meta = with lib; { + description = "Notify allows sending the output from any tool to Slack, Discord and Telegram"; + longDescription = '' + Notify is a helper utility written in Go that allows you to post the output from any tool + to Slack, Discord, and Telegram. + ''; + homepage = "https://github.com/projectdiscovery/notify"; + license = licenses.mit; + maintainers = with maintainers; [ hanemile ]; + }; +} diff --git a/pkgs/tools/misc/tmux/default.nix b/pkgs/tools/misc/tmux/default.nix index c76912e3c90..90273068f3e 100644 --- a/pkgs/tools/misc/tmux/default.nix +++ b/pkgs/tools/misc/tmux/default.nix @@ -1,5 +1,6 @@ { lib, stdenv , fetchFromGitHub +, fetchpatch , autoreconfHook , pkg-config , bison @@ -31,6 +32,14 @@ stdenv.mkDerivation rec { sha256 = "0143ylfk7zsl3xmiasb768238gr582cfhsgv3p0h0f13bp8d6q09"; }; + patches = [ + # See https://github.com/tmux/tmux/pull/2755 + (fetchpatch { + url = "https://github.com/tmux/tmux/commit/d0a2683120ec5a33163a14b0e1b39d208745968f.patch"; + sha256 = "070knpncxfxi6k4q64jwi14ns5vm3606cf402h1c11cwnaa84n1g"; + }) + ]; + nativeBuildInputs = [ pkg-config autoreconfHook diff --git a/pkgs/tools/networking/stevenblack-blocklist/default.nix b/pkgs/tools/networking/stevenblack-blocklist/default.nix index 29faa448a3d..7bb717c1a50 100644 --- a/pkgs/tools/networking/stevenblack-blocklist/default.nix +++ b/pkgs/tools/networking/stevenblack-blocklist/default.nix @@ -1,7 +1,7 @@ { lib, fetchFromGitHub }: let - version = "3.7.8"; + version = "3.7.9"; in fetchFromGitHub { name = "stevenblack-blocklist-${version}"; @@ -9,7 +9,7 @@ fetchFromGitHub { owner = "StevenBlack"; repo = "hosts"; rev = version; - sha256 = "sha256-z+AkjWmqP4ASnpIAG/OyZC4W5xU5YOeFTsmdkLvPixQ="; + sha256 = "sha256-5PhJ48w/dNmSgc3XUaFUhVWyvH7jSUj8moBM3Yvmrz4="; meta = with lib; { description = "Unified hosts file with base extensions"; diff --git a/pkgs/top-level/all-packages.nix b/pkgs/top-level/all-packages.nix index 5258db07b13..e2cd89fc096 100644 --- a/pkgs/top-level/all-packages.nix +++ b/pkgs/top-level/all-packages.nix @@ -204,6 +204,8 @@ in buf = callPackage ../development/tools/buf { }; + elfcat = callPackage ../tools/misc/elfcat { }; + # Zip file format only allows times after year 1980, which makes e.g. Python wheel building fail with: # ValueError: ZIP does not support timestamps before 1980 ensureNewerSourcesForZipFilesHook = ensureNewerSourcesHook { year = "1980"; }; @@ -3069,6 +3071,8 @@ in inherit (darwin.apple_sdk.frameworks) Cocoa; }; + notify = callPackage ../tools/misc/notify { }; + nrsc5 = callPackage ../applications/misc/nrsc5 { }; nwipe = callPackage ../tools/security/nwipe { }; @@ -12676,6 +12680,8 @@ in wasm = ocamlPackages.wasm; + wasm3 = callPackage ../development/interpreters/wasm3 { }; + proglodyte-wasm = callPackage ../development/interpreters/proglodyte-wasm { }; @@ -13911,6 +13917,8 @@ in premake = premake4; + privacyidea = callPackage ../applications/misc/privacyidea { }; + procodile = callPackage ../tools/system/procodile { }; pry = callPackage ../development/tools/pry { }; @@ -20833,7 +20841,7 @@ in dpdk-kmods = callPackage ../os-specific/linux/dpdk-kmods { }; - dpdk = throw "The dpdk driver has been renamed to dpdk-mods."; + dpdk = throw "The dpdk driver has been renamed to dpdk-kmods."; exfat-nofuse = callPackage ../os-specific/linux/exfat { }; @@ -22510,6 +22518,8 @@ in inter = callPackage ../data/fonts/inter { }; + open-fonts = callPackage ../data/fonts/open-fonts { }; + scientifica = callPackage ../data/fonts/scientifica { }; siji = callPackage ../data/fonts/siji @@ -27196,6 +27206,8 @@ in tudu = callPackage ../applications/office/tudu { }; + tuna = python3Packages.callPackage ../os-specific/linux/tuna { }; + tunefish = callPackage ../applications/audio/tunefish { stdenv = clangStdenv; # https://github.com/jpcima/tunefish/issues/4 }; @@ -30253,6 +30265,8 @@ in pcalc = callPackage ../applications/science/math/pcalc { }; + programmer-calculator = callPackage ../applications/science/math/programmer-calculator { }; + bcal = callPackage ../applications/science/math/bcal { }; pspp = callPackage ../applications/science/math/pspp { }; diff --git a/pkgs/top-level/python-aliases.nix b/pkgs/top-level/python-aliases.nix index b9c37c96090..5d9e8b1b124 100644 --- a/pkgs/top-level/python-aliases.nix +++ b/pkgs/top-level/python-aliases.nix @@ -43,6 +43,7 @@ mapAliases ({ googleapis_common_protos = googleapis-common-protos; # added 2021-03-19 HAP-python = hap-python; # added 2021-06-01 MechanicalSoup = mechanicalsoup; # added 2021-06-01 + privacyidea = throw "renamed to pkgs.privacyidea"; # added 2021-06-20 pylibgen = throw "pylibgen is unmaintained upstreamed, and removed from nixpkgs"; # added 2020-06-20 pymssql = throw "pymssql has been abandoned upstream."; # added 2020-05-04 pytest-pep8 = pytestpep8; # added 2021-01-04 diff --git a/pkgs/top-level/python-packages.nix b/pkgs/top-level/python-packages.nix index 86ac6b5027f..5481aa4f084 100644 --- a/pkgs/top-level/python-packages.nix +++ b/pkgs/top-level/python-packages.nix @@ -5471,8 +5471,6 @@ in { prison = callPackage ../development/python-modules/prison { }; - privacyidea = callPackage ../development/python-modules/privacyidea { }; - pyjwt1 = callPackage ../development/python-modules/pyjwt/1.nix { }; proboscis = callPackage ../development/python-modules/proboscis { }; @@ -6885,6 +6883,8 @@ in { python-etcd = callPackage ../development/python-modules/python-etcd { }; + python-ethtool = callPackage ../development/python-modules/python-ethtool { }; + python_fedora = callPackage ../development/python-modules/python_fedora { }; python-fontconfig = callPackage ../development/python-modules/python-fontconfig { }; @@ -6929,6 +6929,8 @@ in { python-Levenshtein = callPackage ../development/python-modules/python-levenshtein { }; + python-linux-procfs = callPackage ../development/python-modules/python-linux-procfs { }; + python-logstash = callPackage ../development/python-modules/python-logstash { }; python-ly = callPackage ../development/python-modules/python-ly { }; |