68 files changed, 1 insertions, 1682 deletions
diff --git a/test/README b/README
index e2f76b08301..e2f76b08301 100644
--- a/test/README
+++ b/README
diff --git a/STABLE b/STABLE
deleted file mode 100644
index c227083464f..00000000000
--- a/STABLE
+++ /dev/null
@@ -1 +0,0 @@
-0
\ No newline at end of file
diff --git a/VERSION b/VERSION
deleted file mode 100644
index ceab6e11ece..00000000000
--- a/VERSION
+++ /dev/null
@@ -1 +0,0 @@
-0.1
\ No newline at end of file
diff --git a/test/boot-environment.nix b/boot-environment.nix
index 78086e99cfc..78086e99cfc 100644
--- a/test/boot-environment.nix
+++ b/boot-environment.nix
diff --git a/test/boot-stage-1-init.sh b/boot-stage-1-init.sh
index d62bd157975..d62bd157975 100644
--- a/test/boot-stage-1-init.sh
+++ b/boot-stage-1-init.sh
diff --git a/test/boot-stage-1.nix b/boot-stage-1.nix
index ef1ebfc7225..ef1ebfc7225 100644
--- a/test/boot-stage-1.nix
+++ b/boot-stage-1.nix
diff --git a/test/boot-stage-2-init.sh b/boot-stage-2-init.sh
index 57a6a20a71f..57a6a20a71f 100644
--- a/test/boot-stage-2-init.sh
+++ b/boot-stage-2-init.sh
diff --git a/test/boot-stage-2.nix b/boot-stage-2.nix
index 7d73e37cb4f..7d73e37cb4f 100644
--- a/test/boot-stage-2.nix
+++ b/boot-stage-2.nix
diff --git a/boot/boot.sh b/boot/boot.sh
deleted file mode 100644
index a0cf0d74c90..00000000000
--- a/boot/boot.sh
+++ /dev/null
@@ -1,43 +0,0 @@
-#! @bash@/bin/sh -e
-
-set -e
-
-. @out@/bin/env.sh
-
-echo "--- Nix ---"
-
-echo "mounting /proc..."
-mount -n -t proc none /proc
-
-echo "mounting /sys..."
-mount -n -t sysfs none /sys
-
-echo "mounting /dev/pts..."
-mount -n -t devpts none /dev/pts
-
-#echo "checking /dev/root..."
-#e2fsck -y /dev/root || test "$?" -le 1
-
-echo "remounting / writable..."
-mount -n -o remount,rw /dev/root /
-
-echo "setting up hostname..."
-hostname nixos
-
-echo "cleaning utmp and wtmp..."
-echo "" > /var/run/utmp
-echo "" > /var/log/wtmp
-
-echo "loading USB controller modules..."
-@module_init_tools@/sbin/modprobe uhci-hcd
-
-echo "enabling loopback interface..."
-ifconfig lo 127.0.0.1
-
-echo "enabling ethernet interface..."
-ifconfig eth0 $(cat /etc/networking/local-ip) up || true
-
-echo "setting up routing table..."
-route add default gw $(cat /etc/networking/gateway-ip) || true
-
-echo "boot done."
diff --git a/boot/builder.sh b/boot/builder.sh
deleted file mode 100755
index 3c33a3669a8..00000000000
--- a/boot/builder.sh
+++ /dev/null
@@ -1,46 +0,0 @@
-#! /bin/sh -e
-
-. $stdenv/setup
-
-mkdir $out
-mkdir $out/bin
-
-for i in $boot $halt $login $env; do
-    dst=$out/bin/$(basename $i | cut -c34-)
-    sed \
-        -e "s^@bash\@^$bash^g" \
-        -e "s^@coreutils\@^$coreutils^g" \
-        -e "s^@findutilsWrapper\@^$findutilsWrapper^g" \
-        -e "s^@utillinux\@^$utillinux^g" \
-        -e "s^@sysvinit\@^$sysvinit^g" \
-        -e "s^@e2fsprogs\@^$e2fsprogs^g" \
-        -e "s^@nettools\@^$nettools^g" \
-        -e "s^@nix\@^$nix^g" \
-        -e "s^@wget\@^$wget^g" \
-        -e "s^@which\@^$which^g" \
-        -e "s^@subversion\@^$subversion^g" \
-        -e "s^@vim\@^$vim^g" \
-        -e "s^@screen\@^$screen^g" \
-        -e "s^@less\@^$less^g" \
-        -e "s^@openssh\@^$openssh^g" \
-        -e "s^@binutils\@^$binutils^g" \
-        -e "s^@strace\@^$strace^g" \
-        -e "s^@shadowutils\@^$shadowutils^g" \
-        -e "s^@iputils\@^$iputils^g" \
-        -e "s^@gnumake\@^$gnumake^g" \
-        -e "s^@curl\@^$curl^g" \
-        -e "s^@gnused\@^$gnused^g" \
-        -e "s^@gnutar\@^$gnutar^g" \
-        -e "s^@gnugrep\@^$gnugrep^g" \
-        -e "s^@gzip\@^$gzip^g" \
-        -e "s^@gcc\@^$gcc^g" \
-        -e "s^@mingettyWrapper\@^$mingettyWrapper^g" \
-        -e "s^@module_init_tools\@^$module_init_tools^g" \
-        -e "s^@grub\@^$grubWrapper^g" \
-        -e "s^@dhcpWrapper\@^$dhcpWrapper^g" \
-        -e "s^@man\@^$man^g" \
-        -e "s^@nano\@^$nano^g" \
-        -e "s^@out\@^$out^g" \
-        < $i > $dst
-    chmod +x $dst
-done
diff --git a/boot/default.nix b/boot/default.nix
deleted file mode 100644
index f215104bfe5..00000000000
--- a/boot/default.nix
+++ /dev/null
@@ -1,20 +0,0 @@
-{ stdenv, bash, coreutils, findutilsWrapper, utillinux, sysvinit, e2fsprogs
-, nettools, nix, subversion, gcc, wget, which, vim, less, screen, openssh
-, strace, shadowutils, iputils, gnumake, curl, gnused, gnugrep , gnutar, gzip
-, mingettyWrapper, grubWrapper, parted, module_init_tools, dhcpWrapper
-, man, nano}:
-
-derivation {
-  name = "boot";
-  system = stdenv.system;
-  builder = ./builder.sh;
-  boot = ./boot.sh;
-  halt = ./halt.sh;
-  login = ./login.sh;
-  env = ./env.sh;
-  inherit stdenv bash coreutils findutilsWrapper utillinux sysvinit
-          e2fsprogs nettools nix subversion gcc wget which vim less screen
-          openssh strace shadowutils iputils gnumake curl gnused
-          gnutar gnugrep gzip mingettyWrapper grubWrapper parted
-          module_init_tools dhcpWrapper man nano;
-}
diff --git a/boot/env.sh b/boot/env.sh
deleted file mode 100644
index e5e6051c0ac..00000000000
--- a/boot/env.sh
+++ /dev/null
@@ -1 +0,0 @@
-export PATH=@nix@/bin:@bash@/bin:@coreutils@/bin:@findutilsWrapper@/bin:@utillinux@/bin:@utillinux@/sbin:@sysvinit@/bin:@sysvinit@/sbin:@e2fsprogs@/bin:@e2fsprogs@/sbin:@nettools@/bin:@nettools@/sbin:@gcc@/bin:@subversion@/bin:@which@/bin:@wget@/bin:@vim@/bin:@less@/bin:@screen@/bin:@openssh@/bin:@binutils@/bin:@strace@/bin:@shadowutils@/bin:@shadowutils@/sbin:@iputils@/bin:@gnumake@/bin:@curl@/bin:@gnused@/bin:@gnutar@/bin:@gnugrep@/bin:@gzip@/bin:@mingettyWrapper@/sbin:@grub@/bin:@grub@/sbin:@module_init_tools@/bin:@module_init_tools@/sbin:@dhcpWrapper@/sbin:@man@/bin:@nano@/bin
diff --git a/boot/halt.sh b/boot/halt.sh
deleted file mode 100644
index c6e000b92b6..00000000000
--- a/boot/halt.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#! @bash@/bin/sh -e
-
-. @out@/bin/env.sh
-
-echo "unmount file systems..."
-umount -avt noproc,nonfs,nosmbfs,nodevfs || echo "(failed)" # ignore errors
-
-echo "syncing..."
-sync || echo "(failed)" # ignore errors
-
-echo "shutting down..."
-halt -d -f
diff --git a/boot/login.sh b/boot/login.sh
deleted file mode 100644
index 14bb418bd9a..00000000000
--- a/boot/login.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#! @bash@/bin/sh -e
-
-. @out@/bin/env.sh
-
-tty=$1
-
-exec < $tty > $tty 2>&1
-
-echo
-echo "=== Welcome to Nix! ==="
-
-export HOME=/root
-cd $HOME
-
-exec @bash@/bin/sh
diff --git a/doc/X-howto b/doc/X-howto
deleted file mode 100644
index 6cf4bd36763..00000000000
--- a/doc/X-howto
+++ /dev/null
@@ -1,16 +0,0 @@
-Making X work in NixOS (fixing guide)
-
-  Mouse
-
-* for mouse support /dev/input/mice needs to be there. This device can be
-created either automatically with udev, or manually with mknod.
-
-  Fonts
-
-Right now fonts have to be copied from another machine and put into
-/usr/X11R6/lib/X11/fonts
-
-  Config
-
-in services/trunk/configurations/tyros.cs.uu.nl-xorg/ there is a Nix expression
-which builds a working X configuration for use in VMware.
diff --git a/doc/configuration.txt b/doc/configuration.txt
deleted file mode 100644
index 2275c6e4281..00000000000
--- a/doc/configuration.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Configuration in NixOS
-
-Configuration in NixOS is not very straightforward. On other Linux
-distribution site-specific information (password files, host files, and
-so on) are stored with information that is rather generic for a lot of
-operating systems. To be able to handle these in a gentle way I have decided
-to seperate these two a bit more in NixOS.
-
-In particular, in the /etc directory there is a Nix profile called "configs".
-In this profile the generic configuration is kept. In time this can grow
-to keep configuration which is site specific, but which can easily be kept
-in the store, such as "profile" (default system wide Bourne shell profile)
-
-Right now two packages should be in this profile:
-
-* etcServices : installs a file called "services" (/etc/services should
-point to this)
-* etcProtocols : installs a file called "protocols" (/etc/protocols should
-point to this)
-
-During install time these packages should be installed and the right symlinks
-should be made.
-
-When NIX-40 is closed, we might consider making /etc itself a profile and
-keep even more configuration information inside the Nix store.
diff --git a/doc/howto b/doc/howto
deleted file mode 100644
index 58e3344d6ea..00000000000
--- a/doc/howto
+++ /dev/null
@@ -1,117 +0,0 @@
-NixOS installation HOWTO -- August 28, 2006
-
-This is small HOWTO of how to build and install the current version of
-NixOS.
-
-
-  Building
-
-Install Nix. Checkout nixpkgs from Subversion, as well as nixu. Adapt the
-scripts in nixu to reflect the location of nixpkgs (default /nixpkgs).
-Make sure mktemp is installed. Run ./make-disk.sh. Wait.
-
-  Burning
-
-Use your favourite tool to burn the ISO image to a CD.
-
-  Installing
-
-Currently NixOS can only be installed with machines that have a specific
-hardware set up:
-
-An ATA harddisk on the first ATA controller (hda) with:
-- data partition
-- swap partition
-
-All data on these two partitions will be wiped and the bootloader in the
-Master Boot Record (MBR) will be overwritten with GRUB.
-
-The NixOS installer will drop you into a shell, from which you can run
-fdisk. Then it expects to find a file called "disklayout" with three
-variables:
-
-SWAP :: partition to use as swap
-INSTALLDEVICE :: partition that will be /root
-TARGETDRIVE :: drive on which grub will be installed
-
-This file will be read by the install script automatically when you launch
-the script:
-
-# sh fill-disk.sh
-
-The configuration data that grub writes to disk might not be correct (should
-be). When something goes wrong you probably won't have to reinstall. The
-manual for grub is quite helpful in these cases.
-
-  Configuring
-
-To get NixOS in a working state, do the following:
-
-- load the networkdriver. This is machine dependent. On the labmachines (Dell
-Optiplex GX-260) this is the e1000 driver:
-
-# modprobe e1000
-
-In vmware the driver is "pcnet32".
-
-- bring the interface up:
-
-# ifconfig eth0 up
-
-If the interface is different (say, eth1) replace eth0 with the right
-interface.
-
-- if DHCP is used, run a DHCP client to obtain an IP address, routing
-and resolving information:
-
-# dhclient eth0
-
-Otherwise, do this yourself:
-
-# ifconfig eth0 <ip address> netmask <netmask>
-# route add default gw <gateway ip address>
-# vim /etc/resolv.conf
-
-  Making syslog work.
-
-- copy /etc/services from a working Linux machine to /etc/services on the
-NixOS machine (needed for sysklogd)
-- copy /etc/syslog.conf from a working Linux machine to /etc/syslog.conf on the
-NixOS machine (needed for sysklogd)
-- launch sysklogd
-
-  Making logins on virtual consoles work.
-
-Logins on virtual consoles are disabled by default. To make them work:
-
-- edit /etc/inittab and outcomment the lines with "mingetty" in them
-- copy /etc/login.defs from a working Linux machine to /etc/login.defs on the
-NixOS machine (needed for mingetty). Alternatively, do:
-
-# touch /etc/login.defs
-
-- relaunch init
-
-
-  Making hotplugging work -- BROKEN RIGHT NOW
-
-Many devices (USB, Firewire) are controlled by so called "hot plugging". The
-kernel executes a program -- usually /sbin/hotplug, but this is configurable
-at boottime by setting the right path in /proc/sys/kernel/hotplug -- when a
-new device is added to the machine. This program makes sure the right kernel
-modules are loaded and optionally, if enabled, sends a message to udev to
-create the right device node in /dev (NOTE: this is not enabled in NixOS right
-now).
-
-- mount usbfs (for USB):
-  # mount -t usbfs usbfs /proc/bus/usb
-- install hotplug package
-  - make symlinks /etc/hotplug, /etc/hotplug.d, /sbin/hotplug (TODO: make
-    this pure)
-  - make sure the kernel and additional modules are prepared well (currently
-    this is hackish, but workable: see kernelscripts/make-kernel.sh for an
-    example)
-  - (optionally:) install udev
-    - make a symlink to /etc/udev/udev.conf
-    - launch udev
-  - plug in a device
diff --git a/fill-disk.sh b/fill-disk.sh
deleted file mode 100755
index 43edcb4dfab..00000000000
--- a/fill-disk.sh
+++ /dev/null
@@ -1,374 +0,0 @@
-#! @bash@/bin/sh
-
-set -e
-
-export PATH=/bin:/sbin:@bash@/bin:@findutils@/bin:@e2fsprogs@/sbin:@grub@/sbin:@sysvinitPath@/sbin:@eject@/bin:@dhcp@/sbin:@modutils@/sbin:@busybox@/bin:@busybox@/sbin
-
-kernel=@kernel@
-xawtv=@xawtv@
-
-narStorePaths=/cdrom/narstorepaths
-
-sysvinitPath=@sysvinitPath@
-bootPath=@bootPath@
-modutils=@modutils@
-mingetty=@mingetty@
-
-nixpkgs=/nixpkgs
-
-echo formatting target device
-
-if test -e disklayout; then
-  source disklayout
-else
-  echo no disk layout configuration present...exiting
-  exit 1
-fi
-
-# $targetdrive is also used by GRUB!
-#targetdrive=/dev/hda
-targetdrive=${TARGETDRIVE}
-#device=${targetdrive}1
-device=${INSTALLDEVICE}
-mkfs.ext2 ${device}
-#swapdevice=${targetdrive}2
-swapdevice=${SWAP}
-mkswap $swapdevice
-
-echo enabling swap
-
-swapon $swapdevice
-
-#if ! test -n "$1"
-#then
-#    echo "need harddisk device for installing!"
-#    exit
-#else
-#    device=$1
-#fi
-
-##
-## Two convenience shell functions
-##
-
-make_dir() {
-    mode=$1
-    name=$2
-    echo creating $name...
-    if ! test -d $root/$name; then mkdir $root/$name; fi
-    chmod $mode $root/$name
-}
-
-touch_file() {
-    name=$1
-    echo touching $name...
-    if ! test -d $root/$name; then touch $root/$name; fi
-}
-root=/tmp/mnt
-
-mkdir -p $root
-
-echo mounting the target drive
-
-mount -t ext2 $device $root
-
-##
-## Create a directory tree on the installation disk.
-##
-
-echo creating file system hierarchy on target drive
-
-make_dir 00755 /bin
-make_dir 00755 /boot
-make_dir 00755 /cdrom
-make_dir 00755 /dev
-make_dir 00755 /dev/pts
-make_dir 00755 /etc # global non-constant configuration
-make_dir 00755 /etc/ssh
-make_dir 00755 /etc/sysconfig
-make_dir 00755 /home
-make_dir 00755 /lib
-make_dir 00755 /lib/modules
-make_dir 00755 /mnt
-make_dir 00755 /mnt/host
-make_dir 00755 /nix
-make_dir 00755 /nix/store
-make_dir 00755 /nix/var
-make_dir 00755 /nix/var/nix
-make_dir 00755 /nix/var/nix/db
-make_dir 00755 /nix/var/nix/gcroots
-make_dir 00755 /nix/var/nix/manifests
-make_dir 00755 /nix/var/nix/profiles
-make_dir 00755 /nix/var/nix/temproots
-make_dir 00755 /nix/var/log
-make_dir 00755 /nix/var/log/nix
-make_dir 00755 /proc
-make_dir 00750 /root
-make_dir 00755 /sbin
-make_dir 00755 /sys
-make_dir 01777 /tmp
-make_dir 00755 /usr
-make_dir 00755 /var
-make_dir 00755 /var/empty
-make_dir 00111 /var/empty/sshd
-make_dir 00755 /var/lock
-make_dir 00755 /var/lock/subsys
-make_dir 00755 /var/log
-make_dir 00755 /var/run
-make_dir 00755 /var/run/usb
-make_dir 00755 /var/spool
-make_dir 00755 /var/state
-make_dir 00755 /var/state/dhcp
-make_dir 00755 /var/tmp
-
-##
-## Add a few devices to /dev on the install disk. This is by far complete.
-##
-
-echo making device nodes on target drive
-
-mknod -m 0666 $root/dev/null c 1 3
-mknod -m 0600 $root/dev/console c 5 1
-mknod -m 0600 $root/dev/tty c 5 0
-mknod -m 0600 $root/dev/tty0 c 4 0
-mknod -m 0600 $root/dev/tty1 c 4 1
-mknod -m 0600 $root/dev/tty2 c 4 2
-mknod -m 0600 $root/dev/tty3 c 4 3
-mknod -m 0444 $root/dev/urandom c 1 9
-
-## needed for sshd and friends. Should actually be made by udev.
-mknod -m 0666 $root/dev/ptmx c 5 2
-
-rm -f $root/etc/mtab
-ln -s /proc/mounts $root/etc/mtab
-
-# prevent df from barfing
-ln -s /proc/mounts /etc/mtab
-
-## Probe for CD device which contains our CD here and mount /nix and
-## /nixpkgs from it inside the ramdisk. Anaconda uses kudzu for this.
-## Find out how Knoppix and SUSE do this...
-
-DEVICES="/dev/hd?"
-
-for i in ${DEVICES}
-do
-echo "Looking for CDROM in: $i"
-  if mount -t iso9660 $i /cdrom >/dev/null 2>&1
-  then
-    if test -f /cdrom/NIXOS
-    then
-      cddevice=$i
-      echo "Accessing NixOS CDROM at $i"
-    break
-    fi
-  fi
-done
-
-echo mounting /cdrom in the target
-
-mount --bind /cdrom $root/cdrom
-mount --bind /cdrom/lib /lib
-
-echo switch to /nix from CD
-## starting here it's OK to have full blown glibc
-
-mount --bind /cdrom/nix /nix
-
-#echo probing for hardware...
-
-#kudzu
-
-export NIX_DATA_DIR=$root/nix/share
-export NIX_LOG_DIR=$root/nix/log/nix
-export NIX_STATE_DIR=$root/nix/var/nix
-export NIX_CONF_DIR=$root/nix/etc
-NIX=@nix@/bin
-
-echo bringing up networking...
-
-#labmachine has 3c59x
-#modprobe 3c59x
-#vmware has pcnet32
-#modprobe pcnet32
-#dhclient eth0
-
-#cp /etc/resolv.conf $root/etc/resolv.conf
-
-#nic=`kudzu -p | grep eth | sort | uniq | cut -d ' ' -f 2`
-
-#echo "NIC: $nic"
-
-echo initialising Nix DB...
-$NIX/nix-store --init
-
-echo verifying Nix DB...
-$NIX/nix-store --verify
-
-echo copying nixpkgs...
-mkdir -p $root/nixpkgs/pkgs
-tar --directory=$root/nixpkgs/pkgs -zxf /cdrom/nixpkgs.tgz
-
-make_dir 0755 /tmp/scripts
-cp -fa /cdrom/scripts $root/tmp
-
-echo adding packages
-
-export NIX_ROOT=$root
-unset NIX_DATA_DIR
-unset NIX_LOG_DIR
-unset NIX_STATE_DIR
-unset NIX_CONF_DIR
-
-cp /cdrom/mystorepaths $root/tmp
-
-echo copying store
-
-tar --directory=$root -zxf /cdrom/nixstore.tgz
-
-echo registering valid paths...
-
-$NIX/nix-store --register-validity < $root/tmp/mystorepaths
-
-unset NIX_ROOT
-export NIX_DATA_DIR=$root/nix/share
-export NIX_LOG_DIR=$root/nix/log/nix
-export NIX_STATE_DIR=$root/nix/var/nix
-export NIX_CONF_DIR=$root/nix/etc
-
-echo creating /bin/sh
-ln -s @bashGlibc@/bin/sh $root/bin/sh
-
-echo adding manifest
-$NIX/nix-pull file:///cdrom/MANIFEST
-
-export NIX_ROOT=$root
-unset NIX_DATA_DIR
-unset NIX_LOG_DIR
-unset NIX_STATE_DIR
-unset NIX_CONF_DIR
-
-## Fix this. Probably nix-instantiate, then nix-store -r.
-## Also make sure everything gets installed into an actual profile!
-
-$NIX/nix-env -iKf $nixpkgs/pkgs/top-level/all-packages.nix -A nix
-$NIX/nix-env -iKf $nixpkgs/pkgs/top-level/all-packages.nix -A coreutils
-$NIX/nix-env -iKf $nixpkgs/pkgs/top-level/all-packages.nix -A gnugrep
-#$NIX/nix-env -iKf $nixpkgs/pkgs/top-level/all-packages.nix -A kernel
-$NIX/nix-env -iKf $nixpkgs/pkgs/top-level/all-packages.nix -A kernelscripts
-$NIX/nix-env -iKf $nixpkgs/pkgs/top-level/all-packages.nix -A grub
-
-cat $narStorePaths | xargs -n 1 -i% $NIX/nix-env -i %
-
-echo setting init symlink...
-rm -f $root/init
-#ln -s $sysvinitPath/sbin/init $root/init
-ln -s @sysvinitPath@/sbin/init $root/sbin/init
-#ln -s @bash@/bin/bash $root/bin/bash
-
-echo setting up inittab...
-rm -f $root/etc/inittab
-echo "id:2:initdefault:" >> $root/etc/inittab
-echo "si::bootwait:$bootPath/bin/boot.sh" >> $root/etc/inittab
-echo "ht:06:wait:$bootPath/bin/halt.sh" >> $root/etc/inittab
-echo "1:2345:respawn:$bootPath/bin/login.sh /dev/tty1" >> $root/etc/inittab
-echo "#2:2345:respawn:$mingetty/sbin/mingetty tty2" >> $root/etc/inittab
-echo "#3:2345:respawn:$mingetty/sbin/mingetty tty3" >> $root/etc/inittab
-#echo "2:2345:respawn:$bootPath/bin/login.sh /dev/ttys/1" >> $root/etc/inittab
-
-echo setting up networking information...
-
-make_dir 00755 /etc/networking
-#cp /etc/resolv.conf $root/etc
-rm -f $root/etc/hosts
-echo "127.0.0.1 localhost" >> $root/etc/hosts
-
-echo storing hardware information...
-
-#kudzu -p > $root/etc/sysconfig/hwconf
-#cp /etc/modprobe.conf $root/etc/
-
-echo setting up initial account information...
-
-echo "root:x:0:root" > $root/etc/group
-echo "sshd:x:74:" >> $root/etc/group
-echo "root:x:0:0:root:/root:/bin/sh" > $root/etc/passwd
-echo "sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin" >> $root/etc/passwd
-echo "root::12757:0:99999:7:::" >> $root/etc/shadow
-echo "sshd:!!:12757:0:99999:7:::" >> $root/etc/shadow
-
-echo default profile for root
-echo "source @nix@/etc/profile.d/nix.sh" > $root/root/.profile
-
-touch_file /etc/login.defs
-touch_file /etc/services
-
-##
-## Do kernel stuff here.
-##
-strippedName=$(basename $root/@kernel@);
-if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then
-        strippedName=$(echo "$strippedName" | cut -c34- | cut -c 7-)
-fi
-
-kernelhash=$(basename $root/@kernel@);
-if echo "$kernelhash" | grep -q '^[a-z0-9]\{32\}-'; then
-        kernelhash=$(echo "$kernelhash" | cut -c -32)
-fi
-
-version=$strippedName-$kernelhash
-
-ln -s @kernelscripts@/lib/modules/$version $root/lib/modules/$version
-
-##
-## init
-##
-
-ln -s $device $root/dev/root
-ln -s @sysvinitPath@/sbin/init /sbin/init
-
-##
-## Do funky stuff with grub here.
-##
-
-echo installing bootloader
-
-grub-install --root-directory=${root} --no-floppy ${targetdrive}
-
-# FIXME "root (hd0,0)"
-cat > $root/boot/grub/menu.lst << GRUBEND
-default=0
-timeout=5
-title NixOS
-        kernel @kernel@/vmlinuz root=$device
-GRUBEND
-
-echo clearing substitutes
-
-$NIX/nix-store --clear-substitutes
-
-#echo clearing network information
-
-#rm $root/etc/resolv.conf
-
-#echo copying install log
-
-#cp /tmp/install-log $root/root
-
-# bizar. busybox umount doesn't like things with --bind it seems.
-echo umounting filesystem
-
-umount $root/cdrom
-umount $root
-#umount /nix
-umount /cdrom
-#echo ejecting $cddevice
-#eject $cddevice
-
-echo install done
-echo it\'s safe to turn off your machine
-echo exiting install process
-
-#while true; do
-   #sleep 60;
-#done
diff --git a/test/grub-menu-builder.sh b/grub-menu-builder.sh
index 36fc0b05e12..36fc0b05e12 100644
--- a/test/grub-menu-builder.sh
+++ b/grub-menu-builder.sh
diff --git a/test/helpers/unpack-theme.nix b/helpers/unpack-theme.nix
index 69d2eebe530..69d2eebe530 100644
--- a/test/helpers/unpack-theme.nix
+++ b/helpers/unpack-theme.nix
diff --git a/test/helpers/unpack-theme.sh b/helpers/unpack-theme.sh
index 6eda7bcfbd4..6eda7bcfbd4 100644
--- a/test/helpers/unpack-theme.sh
+++ b/helpers/unpack-theme.sh
diff --git a/init.sh b/init.sh
deleted file mode 100644
index b17a6637f67..00000000000
--- a/init.sh
+++ /dev/null
@@ -1,79 +0,0 @@
-#! @bash@/bin/sh -e
-
-export PATH=/bin:/sbin:@bash@/bin:@findutils@/bin:@busybox@/bin:@busybox@/sbin:@e2fsprogs@/sbin:@grub@/sbin:@sysvinitPath@/sbin:@eject@/bin:@dhcp@/sbin:@modutils@/sbin
-
-echo mounting special filesystems
-
-mount -t proc proc /proc
-mount -t sysfs sys /sys
-
-# make a complete /dev filesystem
-# ripped permissions and everything from anaconda (loader2/devices.h)
-
-echo making device nodes
-
-# consoles
-
-#mknod -m 0600 /dev/console c 5 1
-mknod -m 0600 /dev/ttyS0 c 4 64
-mknod -m 0600 /dev/ttyS1 c 4 65
-mknod -m 0600 /dev/ttyS2 c 4 66
-mknod -m 0600 /dev/ttyS3 c 4 67
-
-# base UNIX devices
-mknod -m 0600 /dev/mem c 1 1
-mknod -m 0666 /dev/null c 1 3
-mknod -m 0666 /dev/zero c 1 5
-
-# tty
-mknod -m 0600 /dev/tty c 5 0
-mknod -m 0600 /dev/tty0 c 4 0
-mknod -m 0600 /dev/tty1 c 4 1
-mknod -m 0600 /dev/tty2 c 4 2
-mknod -m 0600 /dev/tty3 c 4 3
-mknod -m 0600 /dev/tty4 c 4 4
-mknod -m 0600 /dev/tty5 c 4 5
-mknod -m 0600 /dev/tty6 c 4 6
-mknod -m 0600 /dev/tty7 c 4 7
-mknod -m 0600 /dev/tty8 c 4 8
-mknod -m 0600 /dev/tty9 c 4 9
-
-mkdir -m 0755 /dev/pts
-mknod -m 0666 /dev/ptmx c 5 2
-
-# random
-
-mknod -m 0644 /dev/random c 1 8
-mknod -m 0644 /dev/urandom c 1 9
-
-mknod -m 0660 /dev/hda b 3 0
-mknod -m 0660 /dev/hda1 b 3 1
-mknod -m 0660 /dev/hda2 b 3 2
-mknod -m 0660 /dev/hda3 b 3 3
-
-mknod -m 0660 /dev/hdb b 3 64
-mknod -m 0660 /dev/hdb1 b 3 65
-mknod -m 0660 /dev/hdb2 b 3 66
-mknod -m 0660 /dev/hdb3 b 3 67
-
-mknod -m 0660 /dev/hdc b 22 0
-mknod -m 0660 /dev/hdc1 b 22 1
-mknod -m 0660 /dev/hdc2 b 22 2
-mknod -m 0660 /dev/hdc3 b 22 3
-
-mknod -m 0660 /dev/hdd b 22 64
-mknod -m 0660 /dev/hdd1 b 22 65
-mknod -m 0660 /dev/hdd2 b 22 66
-mknod -m 0660 /dev/hdd3 b 22 67
-
-#mknod -m 0660 /dev/sda b 8 0
-#mknod -m 0660 /dev/sda1 b 8 1
-#mknod -m 0660 /dev/sda2 b 8 2
-#mknod -m 0660 /dev/sda3 b 8 3
-
-mknod -m 0600 /dev/initctl p
-
-echo starting emergency shell on tty2
-
-exec ./ramdisk-login.sh /dev/tty2 &
-exec ./login.sh
diff --git a/init/builder.sh b/init/builder.sh
deleted file mode 100755
index 15ba03d4780..00000000000
--- a/init/builder.sh
+++ /dev/null
@@ -1,42 +0,0 @@
-#! /bin/sh -e
-
-. $stdenv/setup
-
-mkdir $out
-mkdir $out/bin
-
-#for i in $boot $halt $login $env; do
-#    dst=$out/bin/$(basename $i | cut -c34-)
-#    sed \
-#        -e "s^@bash\@^$bash^g" \
-#        -e "s^@coreutils\@^$coreutils^g" \
-#        -e "s^@findutils\@^$findutils^g" \
-#        -e "s^@utillinux\@^$utillinux^g" \
-#        -e "s^@sysvinit\@^$sysvinit^g" \
-#        -e "s^@e2fsprogs\@^$e2fsprogs^g" \
-#        -e "s^@nettools\@^$nettools^g" \
-#        -e "s^@nix\@^$nix^g" \
-#        -e "s^@wget\@^$wget^g" \
-#        -e "s^@which\@^$which^g" \
-#        -e "s^@subversion\@^$subversion^g" \
-#        -e "s^@vim\@^$vim^g" \
-#        -e "s^@screen\@^$screen^g" \
-#        -e "s^@less\@^$less^g" \
-#        -e "s^@openssh\@^$openssh^g" \
-#        -e "s^@binutils\@^$binutils^g" \
-#        -e "s^@strace\@^$strace^g" \
-#        -e "s^@shadowutils\@^$shadowutils^g" \
-#        -e "s^@iputils\@^$iputils^g" \
-#        -e "s^@gnumake\@^$gnumake^g" \
-#        -e "s^@curl\@^$curl^g" \
-#        -e "s^@gnused\@^$gnused^g" \
-#        -e "s^@gnutar\@^$gnutar^g" \
-#        -e "s^@gnugrep\@^$gnugrep^g" \
-#        -e "s^@gzip\@^$gzip^g" \
-#        -e "s^@gcc\@^$gcc^g" \
-#        -e "s^@mingetty\@^$mingetty^g" \
-#        -e "s^@grub\@^$grub^g" \
-#        -e "s^@out\@^$out^g" \
-#        < $i > $dst
-#    chmod +x $dst
-#done
diff --git a/init/default.nix b/init/default.nix
deleted file mode 100644
index f1b10b5bc8f..00000000000
--- a/init/default.nix
+++ /dev/null
@@ -1,11 +0,0 @@
-{ stdenv, bash, coreutils, utillinux, e2fsprogs, nix, shadowutils, mingetty, grubWrapper, parted, module_init_tools, dhcpWrapper}:
-
-derivation {
-  name = "init";
-  system = stdenv.system;
-  builder = ./builder.sh;
-  stage1 = ./prepare-disk.sh;
-  stage2 = ./install-disk.sh;
-  inherit stdenv bash coreutils utillinux e2fsprogs nix shadowutils
-          mingetty grubWrapper parted module_init_tools dhcpWrapper;
-}
diff --git a/init/install-disk.sh b/init/install-disk.sh
deleted file mode 100755
index de158cda600..00000000000
--- a/init/install-disk.sh
+++ /dev/null
@@ -1,176 +0,0 @@
-#! @bash@/bin/sh -e
-
-export PATH=@bash@/bin:@coreutils@/bin:@findutils@/bin:@utillinux@/bin:@utillinux@/sbin:@e2fsprogs@/sbin
-
-sysvinitPath=@sysvinitPath@
-bootPath=@bootPath@
-
-#if ! test -n "$1"
-#then
-#    echo "need harddisk device for installing!"
-#    exit
-#else
-#    device=$1
-#fi
-
-device=/dev/hda1
-#device=/dev/sda1
-
-
-make_dir() {
-    mode=$1
-    name=$2
-    echo creating $name...
-    if ! test -d $root/$name; then mkdir $root/$name; fi
-    chmod $mode $root/$name
-}
-
-
-touch_file() {
-    name=$1
-    echo touching $name...
-    if ! test -d $root/$name; then touch $root/$name; fi
-}
-root=/tmp/mnt
-
-mkdir -p /tmp/mnt
-
-mount -t ext2 $device /tmp/mnt
-
-cd /sys; echo *
-
-# mkdir -p /nix
-# mkdir -p /nixpkgs/trunk/pkgs
-
-# temporary hack
-# mount --bind /mnt/cdrom1/nix /nix
-# mount --bind /mnt/cdrom1/pkgs /nixpkgs/trunk/pkgs
-
-##
-## Create a directory tree on the installation disk.
-##
-
-make_dir 00755 /bin
-make_dir 00755 /dev
-make_dir 00755 /proc
-make_dir 01777 /tmp
-make_dir 00755 /etc # global non-constant configuration
-make_dir 00755 /etc-secret
-make_dir 00755 /var
-make_dir 00755 /nix
-make_dir 00755 /nix/store
-make_dir 00755 /nix/var
-make_dir 00755 /nix/var/nix
-make_dir 00755 /nix/var/nix/db
-make_dir 00755 /nix/var/nix/manifests
-make_dir 00755 /nix/var/log
-make_dir 00755 /nix/var/log/nix
-make_dir 00755 /nixpkgs
-make_dir 00755 /nixpkgs/trunk
-make_dir 00755 /mnt
-make_dir 00755 /mnt/host
-make_dir 00755 /home
-make_dir 00755 /home/root
-
-##
-## Add a few devices to /dev on the install disk. This is by far complete.
-##
-
-mknod $root/dev/null c 1 3
-
-touch_file /etc/passwd
-touch_file /etc/shadow
-touch_file /etc/group
-touch_file /etc/login.defs
-
-rm -f $root/etc/mtab
-#ln -s /proc/mounts $root/etc/mtab
-
-cat /proc/mounts
-
-export NIX_DATA_DIR=$root/nix/share
-export NIX_LOG_DIR=$root/nix/log/nix
-export NIX_STATE_DIR=$root/nix/var/nix
-export NIX_CONF_DIR=$root/nix/etc
-NIX_CMD_PATH=@NIX_CMD_PATH@/bin
-
-echo initialising Nix DB...
-#/nix/bin/nix-store --init
-$NIX_CMD_PATH/nix-store --init
-
-echo verifying Nix DB...
-$NIX_CMD_PATH/nix-store --verify
-
-echo copying nixpkgs...
-cp -fa ../pkgs $root/nixpkgs/trunk
-
-make_dir 0755 /tmp/scripts
-cp -fa ../scripts $root/tmp
-
-#echo adding manifest
-#$NIX_CMD_PATH/nix-pull $manifest
-
-echo adding packages
-export NIX_ROOT=$root
-unset NIX_DATA_DIR
-unset NIX_LOG_DIR
-unset NIX_STATE_DIR
-unset NIX_CONF_DIR
-
-#storeExpr=$(echo '(import /tmp/scripts/pkgs.nix).everything' | $NIX_CMD_PATH/nix-instantiate -v -v -)
-#storeExpr=$(echo '(import ./pkgs.nix).everything' | $NIX_CMD_PATH/nix-instantiate -v -v -)
-#$NIX_CMD_PATH/nix-store -r $storeExpr
-#echo $storeExpr
-#storeExpr2=$($NIX_CMD_PATH/nix-store -qR $($NIX_CMD_PATH/nix-store -r $storeExpr))
-#echo storeExpr $storeExpr
-#echo $($NIX_CMD_PATH/nix-store -qR --include-outputs $storeExpr)
-
-echo copying store
-
-(while read storepaths; do
-  cp -fa $storepaths $root/nix/store
-done) < /mnt/cdrom1/mystorepaths
-
-#cp -fa ../nix/store/* $root/nix/store
-
-#echo registering valid paths...
-#(while read storepath; do
-#    echo PATH $storepath
-#    if ! $NIX_CMD_PATH/nix-store --isvalid $storepath 2> /dev/null; then
-#        (unset NIX_ROOT; $NIX_CMD_PATH/nix-store --dump $storepath) | $NIX_CMD_PATH/nix-store --restore $storepath
-#        $NIX_CMD_PATH/nix-store --validpath $storepath
-#    fi
-#done) < /tmp/mystorepaths
-
-#echo registering successors...
-#(while read line; do
-#    echo SUCC $line
-#    $NIX_CMD_PATH/nix-store --successor $line
-#done) < /tmp/mysuccessors
-
-exit
-
-echo setting init symlink...
-rm -f $root/init
-ln -s $sysvinitPath/sbin/init $root/init
-
-echo setting up inittab...
-rm -f $root/etc/inittab
-echo "id:2:initdefault:" >> $root/etc/inittab
-echo "si::bootwait:$bootPath/bin/boot.sh" >> $root/etc/inittab
-echo "ht:06:wait:$bootPath/bin/halt.sh" >> $root/etc/inittab
-echo "1:2345:respawn:$bootPath/bin/login.sh /dev/ttys/0" >> $root/etc/inittab
-#echo "2:2345:respawn:$bootPath/bin/login.sh /dev/ttys/1" >> $root/etc/inittab
-
-echo setting up networking information...
-make_dir 00755 /etc/networking
-echo 192.168.150.1 > $root/etc/networking/local-ip
-echo 192.168.150.3 > $root/etc/networking/gateway-ip
-cp /etc/resolv.conf $root/etc
-rm -f $root/etc/hosts
-echo "127.0.0.1 localhost" >> $root/etc/hosts
-echo "192.168.150.1 uml" >> $root/etc/hosts
-
-###
-### Do funky stuff with grub here.
-###
diff --git a/init/prepare-disk.sh b/init/prepare-disk.sh
deleted file mode 100755
index 8ba9e93ddfc..00000000000
--- a/init/prepare-disk.sh
+++ /dev/null
@@ -1,70 +0,0 @@
-#! @bash@/bin/sh -e
-
-export PATH=@bash@/bin:@coreutils@/bin:@findutils@/bin:@utillinux@/bin:@utillinux@/sbin:@e2fsprogs@/sbin
-
-sysvinitPath=@sysvinitPath@
-bootPath=@bootPath@
-
-mount -t proc proc /proc
-mount -t sysfs sys /sys
-
-#mount -t /dev/hdc /installimage
-
-# make a complete /dev filesystem
-# ripped permissions and everything from anaconda (loader2/devices.h)
-
-# consoles
-
-#mknod -m 0600 /dev/console c 5 1
-mknod -m 0600 /dev/ttyS0 c 4 64
-mknod -m 0600 /dev/ttyS1 c 4 65
-mknod -m 0600 /dev/ttyS2 c 4 66
-mknod -m 0600 /dev/ttyS3 c 4 67
-
-# base UNIX devices
-mknod -m 0600 /dev/mem c 1 1
-mknod -m 0666 /dev/null c 1 3
-mknod -m 0666 /dev/zero c 1 5
-
-# tty
-mknod -m 0600 /dev/tty c 5 0
-mknod -m 0600 /dev/tty0 c 4 0
-mknod -m 0600 /dev/tty1 c 4 1
-mknod -m 0600 /dev/tty2 c 4 2
-mknod -m 0600 /dev/tty3 c 4 3
-mknod -m 0600 /dev/tty4 c 4 4
-mknod -m 0600 /dev/tty5 c 4 5
-mknod -m 0600 /dev/tty6 c 4 6
-mknod -m 0600 /dev/tty7 c 4 7
-mknod -m 0600 /dev/tty8 c 4 8
-mknod -m 0600 /dev/tty9 c 4 9
-
-mkdir -m 0755 /dev/pts
-mknod -m 0666 /dev/ptmx c 5 2
-
-# random
-
-mknod -m 0644 /dev/random c 1 8
-mknod -m 0644 /dev/urandom c 1 9
-
-mknod -m 0660 /dev/hda b 3 0
-mknod -m 0660 /dev/hda1 b 3 1
-mknod -m 0660 /dev/hda2 b 3 2
-mknod -m 0660 /dev/hda3 b 3 3
-
-#mknod -m 0660 /dev/sda b 8 0
-#mknod -m 0660 /dev/sda1 b 8 1
-#mknod -m 0660 /dev/sda2 b 8 2
-#mknod -m 0660 /dev/sda3 b 8 3
-
-echo "dev"
-cd /dev; echo *
-
-mkfs.ext2 /dev/hda1
-mkswap /dev/hda2
-
-## Probe for CD device which contains our CD here and mount /nix and
-## /nixpkgs from it inside the ramdisk. Anaconda uses kudzu for this.
-## Find out how Knoppix and SUSE do this...
-
-$(./install-disk.sh)
diff --git a/install.sh b/install.sh
deleted file mode 100644
index 88ce09ccb2b..00000000000
--- a/install.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#! @bash@/bin/sh -e
-
-exec ./fill-disk.sh | @busybox@/bin/tee /tmp/install-log
diff --git a/test/installer.nix b/installer.nix
index 44080b86a85..44080b86a85 100644
--- a/test/installer.nix
+++ b/installer.nix
diff --git a/test/installer.sh b/installer.sh
index 04c3c80c212..04c3c80c212 100644
--- a/test/installer.sh
+++ b/installer.sh
diff --git a/isolinux.cfg b/isolinux.cfg
index 180b144eeb5..ff19e84c098 100755..100644
--- a/isolinux.cfg
+++ b/isolinux.cfg
@@ -3,4 +3,4 @@ prompt 1
 timeout 60
 label linux
   kernel vmlinuz
-  append initrd=initram.img init=/bin/sh
+  append initrd=initrd selinux=0 apm=on acpi=on
diff --git a/login.sh b/login.sh
deleted file mode 100644
index 1c33a2ebc91..00000000000
--- a/login.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#! @bash@/bin/sh -e
-
-export PATH=@bash@/bin:@coreutilsdiet@/bin:@coreutils@/bin:@findutils@/bin:@utillinux@/bin:@utillinux@/sbin:@e2fsprogs@/sbin:@grub@/sbin:@sysvinitPath@/sbin:@gnugrep@/bin:@which@/bin:@gnutar@/bin:@busybox@/bin:@busybox@/sbin:@nano@/bin
-
-#tty=$1
-
-#exec < $tty > $tty 2>&1
-
-echo
-echo "=== Welcome to Nix! ==="
-echo "NixOS Installation instructions"
-echo ""
-echo "* edit the file called 'disklayout' (vi is provided) and provide"
-echo "  the following name=value pairs:"
-echo "  * INSTALLDEVICE (root device, for example /dev/hda1)"
-echo "  * SWAP (swap device, for example /dev/hda2)"
-echo "  * TARGETDRIVE (target drive to install grub, for example /dev/hda)"
-echo "* run: sh fill-disk.sh"
-echo ""
-echo ""
-echo ""
-echo ""
-
-export HOME=/
-cd $HOME
-
-exec @bash@/bin/sh
diff --git a/test/make-devices.sh b/make-devices.sh
index 1e9f9719ea4..1e9f9719ea4 100644
--- a/test/make-devices.sh
+++ b/make-devices.sh
diff --git a/make-disk.sh b/make-disk.sh
deleted file mode 100755
index d3fe502301a..00000000000
--- a/make-disk.sh
+++ /dev/null
@@ -1,329 +0,0 @@
-#! /bin/sh -e
-
-set -x
-
-if test -z "$TMPDIR"; then export TMPDIR=/tmp; fi
-
-# deps is an array
-declare -a deps
-
-build="nix-build --no-out-link"
-
-coreutils=$($build ./pkgs.nix -A coreutils)
-
-# determine where we can find the Nix binaries
-NIX=$($coreutils/bin/dirname $(which nix-store))
-
-# make sure we use many of our own tools, because it is more pure
-mktemp=$($build ./pkgs.nix -A mktemp)
-
-gnused=$($build ./pkgs.nix -A gnused)
-gnutar=$($build ./pkgs.nix -A gnutar151)
-cdrtools=$($build ./pkgs.nix -A cdrtools)
-gzip=$($build ./pkgs.nix -A gzip)
-cpio=$($build ./pkgs.nix -A cpio)
-
-archivesDir=$($mktemp/bin/mktemp -d)
-manifest=${archivesDir}/MANIFEST
-nixpkgs=./pkgs
-fill_disk=$archivesDir/scripts/fill-disk.sh
-ramdisk_login=$archivesDir/scripts/ramdisk-login.sh
-login_script=$archivesDir/scripts/login.sh
-storePaths=$archivesDir/mystorepaths
-narStorePaths=$archivesDir/narstorepaths
-validatePaths=$archivesDir/validatepaths
-bootiso=$TMPDIR/nixos.iso
-initrd=$TMPDIR/initram.img
-initdir=${archivesDir}/initdir
-initscript=$archivesDir/scripts/init.sh
-
-nix=$($build ./pkgs.nix -A nix)
-busybox=$($build ./pkgs.nix -A busybox)
-nano=$($build ./pkgs.nix -A nano)
-nanoDiet=$($build ./pkgs.nix -A nanoDiet)
-ncurses=$($build ./pkgs.nix -A ncursesDiet)
-
-nixDeps=$($NIX/nix-store -qR $nix)
-
-storeExpr=$($build ./pkgs.nix -A boot)
-
-kernelscripts=$($build ./pkgs.nix -A kernelscripts)
-
-mkinitrd=$($build ./pkgs.nix -A mkinitrd)
-
-### make NAR files for everything we want to install and some more. Make sure
-### the right URL is in there, so specify /cdrom and not cdrom
-$NIX/nix-push --copy $archivesDir $manifest --target file:///cdrom $storeExpr $($build ./pkgs.nix -A kernel) $kernelscripts $mkinitrd
-
-# Location of sysvinit?
-sysvinitPath=$($build ./pkgs.nix -A sysvinit)
-
-# Location of Nix boot scripts?
-bootPath=$($build ./pkgs.nix -A boot)
-
-syslinux=$($build ./pkgs.nix -A syslinux)
-
-kernel=$($build ./pkgs.nix -A kernel)
-kernelscripts=$($build ./pkgs.nix -A kernelscripts)
-
-utillinux=$($build ./pkgs.nix -A utillinux)
-
-gnugrep=$($build ./pkgs.nix -A gnugrep)
-
-grub=$($build ./pkgs.nix -A grubWrapper)
-
-findutils=$($build ./pkgs.nix -A findutilsWrapper)
-
-modutils=$($build ./pkgs.nix -A module_init_toolsStatic)
-
-dhcp=$($build ./pkgs.nix -A dhcpWrapper)
-
-#combideps=$($NIX/nix-store -qR $nix $utillinux $gnugrep $grub $gzip $findutils)
-combideps=$($NIX/nix-store -qR $nix $busybox $grub $findutils $modutils $dhcp $nano)
-
-for i in $storeExpr $mkinitrd
-do
-  echo $i >> $narStorePaths
-done
-#for i in $nixDeps
-for i in $combideps
-do
-  echo $i >> $storePaths
-  echo '' >> $storePaths
-  deps=$($NIX/nix-store -q --references $i)
-  pkgs=$(echo $deps | $coreutils/bin/wc -w)
-  echo $pkgs >> $storePaths
-  for j in $deps
-  do
-    echo $j >> $storePaths
-  done
-  echo copying from store: $i
-  $gnutar/bin/tar -cf - $i | $gnutar/bin/tar --directory=$archivesDir -xf -
-done
-
-tar zcf ${archivesDir}/nixstore.tgz $combideps
-
-utilLinux=$($build ./pkgs.nix -A utillinuxStatic)
-coreUtilsDiet=$($build ./pkgs.nix -A diet.coreutils)
-
-## temporarily normal e2fsprogs until I can get it to build with dietlibc
-e2fsProgs=$($NIX/nix-store -qR $($build ./pkgs.nix -A e2fsprogsDiet))
-#e2fsProgs=$($NIX/nix-store -qR $($build ./pkgs.nix -A e2fsprogs))
-modUtils=$($NIX/nix-store -qR $($build ./pkgs.nix -A module_init_toolsStatic))
-Grub=$($NIX/nix-store -qR $($build ./pkgs.nix -A grubWrapper))
-Kernel=$($NIX/nix-store -qR $($build ./pkgs.nix -A kernel))
-SysVinit=$($NIX/nix-store -qR $($build ./pkgs.nix -A sysvinit))
-BootPath=$($NIX/nix-store -qR $($build ./pkgs.nix -A boot))
-
-bashGlibc=$($build ./pkgs.nix -A bash)
-bash=$($build ./pkgs.nix -A diet.bash)
-coreutilsdiet=$($build ./pkgs.nix -A diet.coreutils)
-utillinux=$($build ./pkgs.nix -A utillinux)
-e2fsprogs=$($build ./pkgs.nix -A e2fsprogsDiet)
-modutils=$($build ./pkgs.nix -A module_init_toolsStatic)
-grub=$($build ./pkgs.nix -A grubWrapper)
-mingettyWrapper=$($build ./pkgs.nix -A mingettyWrapper)
-dhcp=$($build ./pkgs.nix -A dhcpWrapper)
-gnugrep=$($build ./pkgs.nix -A gnugrep)
-which=$($build ./pkgs.nix -A which)
-eject=$($build ./pkgs.nix -A eject)
-sysklogd=$($build ./pkgs.nix -A sysklogd)
-#kudzu=$($build ./pkgs.nix -A kudzu)
-
-echo creating directories for bootimage
-
-$coreutils/bin/mkdir ${initdir}
-$coreutils/bin/mkdir ${initdir}/bin
-$coreutils/bin/mkdir ${initdir}/cdrom
-$coreutils/bin/mkdir ${initdir}/dev
-$coreutils/bin/mkdir ${initdir}/etc
-$coreutils/bin/mkdir ${initdir}/etc/sysconfig
-$coreutils/bin/mkdir ${initdir}/installimage
-$coreutils/bin/mkdir ${initdir}/lib
-$coreutils/bin/mkdir ${initdir}/modules
-$coreutils/bin/mkdir ${initdir}/proc
-$coreutils/bin/mkdir ${initdir}/sbin
-$coreutils/bin/mkdir ${initdir}/sys
-$coreutils/bin/mkdir ${initdir}/tmp
-$coreutils/bin/mkdir -p ${initdir}/usr/bin
-$coreutils/bin/mkdir -p ${initdir}/usr/sbin
-$coreutils/bin/mkdir ${initdir}/var
-$coreutils/bin/mkdir ${initdir}/var/run
-$coreutils/bin/mkdir -p ${initdir}/var/state/dhcp
-
-echo copying nixpkgs
-
-#svn export ${nixpkgs} ${archivesDir}/pkgs
-(cd $nixpkgs && tar -zcf  ${archivesDir}/nixpkgs.tgz .)
-
-#echo copying packages from store
-
-echo copying scripts
-
-$coreutils/bin/mkdir ${archivesDir}/scripts
-$coreutils/bin/cp -fa * ${archivesDir}/scripts
-$gnused/bin/sed -e "s^@bash\@^$bash^g" \
-    -e "s^@coreutils\@^$coreutilsdiet^g" \
-    -e "s^@busybox\@^$busybox^g" \
-    < $initscript > $initscript.tmp
-$coreutils/bin/mv $initscript.tmp $initscript
-$gnused/bin/sed -e "s^@sysvinitPath\@^$sysvinitPath^g" \
-    -e "s^@bootPath\@^$bootPath^g" \
-    -e "s^@nix\@^$nix^g" \
-    -e "s^@bash\@^$bash^g" \
-    -e "s^@bashGlibc\@^$bashGlibc^g" \
-    -e "s^@findutils\@^$findutils^g" \
-    -e "s^@busybox\@^$busybox^g" \
-    -e "s^@coreutilsdiet\@^$coreutilsdiet^g" \
-    -e "s^@coreutils\@^$coreutils^g" \
-    -e "s^@utilLinux\@^$utilLinux^g" \
-    -e "s^@utillinux\@^$utillinux^g" \
-    -e "s^@e2fsprogs\@^$e2fsprogs^g" \
-    -e "s^@modutils\@^$modutils^g" \
-    -e "s^@grub\@^$grub^g" \
-    -e "s^@kernel\@^$kernel^g" \
-    -e "s^@kernelscripts\@^$kernelscripts^g" \
-    -e "s^@gnugrep\@^$gnugrep^g" \
-    -e "s^@which\@^$which^g" \
-    -e "s^@dhcp\@^$dhcp^g" \
-    -e "s^@sysklogd\@^$sysklogd^g" \
-    -e "s^@gnutar\@^$gnutar^g" \
-    -e "s^@gzip\@^$gzip^g" \
-    -e "s^@mingetty\@^$mingettyWrapper^g" \
-    < $fill_disk > $fill_disk.tmp
-$coreutils/bin/mv $fill_disk.tmp $fill_disk
-
-$gnused/bin/sed -e "s^@sysvinitPath\@^$sysvinitPath^g" \
-    -e "s^@bootPath\@^$bootPath^g" \
-    -e "s^@NIX\@^$nix^g" \
-    -e "s^@bash\@^$bash^g" \
-    -e "s^@findutils\@^$findutils^g" \
-    -e "s^@coreutilsdiet\@^$coreutilsdiet^g" \
-    -e "s^@coreutils\@^$coreutils^g" \
-    -e "s^@utillinux\@^$utilLinux^g" \
-    -e "s^@e2fsprogs\@^$e2fsprogs^g" \
-    -e "s^@modutils\@^$modutils^g" \
-    -e "s^@grub\@^$grub^g" \
-    -e "s^@kernel\@^$kernel^g" \
-    -e "s^@kernelscripts\@^$kernelscripts^g" \
-    -e "s^@gnugrep\@^$gnugrep^g" \
-    -e "s^@which\@^$which^g" \
-    -e "s^@gnutar\@^$gnutar^g" \
-    -e "s^@mingetty\@^$mingettyWrapper^g" \
-    -e "s^@busybox\@^$busybox^g" \
-    < $ramdisk_login > $ramdisk_login.tmp
-$coreutils/bin/mv $ramdisk_login.tmp $ramdisk_login
-
-$gnused/bin/sed -e "s^@sysvinitPath\@^$sysvinitPath^g" \
-    -e "s^@bootPath\@^$bootPath^g" \
-    -e "s^@NIX\@^$nix^g" \
-    -e "s^@bash\@^$bash^g" \
-    -e "s^@findutils\@^$findutils^g" \
-    -e "s^@coreutilsdiet\@^$coreutilsdiet^g" \
-    -e "s^@coreutils\@^$coreutils^g" \
-    -e "s^@utillinux\@^$utilLinux^g" \
-    -e "s^@e2fsprogs\@^$e2fsprogs^g" \
-    -e "s^@modutils\@^$modutils^g" \
-    -e "s^@grub\@^$grub^g" \
-    -e "s^@kernel\@^$kernel^g" \
-    -e "s^@kernelscripts\@^$kernelscripts^g" \
-    -e "s^@gnugrep\@^$gnugrep^g" \
-    -e "s^@which\@^$which^g" \
-    -e "s^@gnutar\@^$gnutar^g" \
-    -e "s^@mingetty\@^$mingettyWrapper^g" \
-    -e "s^@busybox\@^$busybox^g" \
-    -e "s^@nano\@^$nanoDiet^g" \
-    < $login_script > $login_script.tmp
-$coreutils/bin/mv $login_script.tmp $login_script
-
-echo copying bootimage
-
-$coreutils/bin/mkdir ${archivesDir}/isolinux
-$coreutils/bin/cp ${syslinux}/lib/syslinux/isolinux.bin ${archivesDir}/isolinux
-$coreutils/bin/cp isolinux.cfg ${archivesDir}/isolinux
-$coreutils/bin/chmod u+w ${archivesDir}/isolinux/*
-
-echo copying kernel
-
-# By following the symlink we don't have to know the version number
-# of the kernel here.
-$coreutils/bin/cp -L $kernel/vmlinuz ${archivesDir}/isolinux
-
-strippedName=$(basename $kernel);
-if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then
-        strippedName=$(echo "$strippedName" | cut -c34- | cut -c 7-)
-fi
-
-kernelhash=$(basename $root/$kernel);
-if echo "$kernelhash" | grep -q '^[a-z0-9]\{32\}-'; then
-        kernelhash=$(echo "$kernelhash" | cut -c -32)
-fi
-
-version=$strippedName-$kernelhash
-
-echo version: $version
-
-#echo linking kernel modules
-#$coreutils/bin/ln -s $kernel/lib $archivesDir/lib
-
-echo copying network drivers
-#$coreutils/bin/cp -fau --parents --no-preserve=mode $kernel/lib/modules/*/modules.* $archivesDir
-#$coreutils/bin/cp -fau --parents --no-preserve=mode $kernel/lib/modules/*/kernel/drivers/net/* $archivesDir
-
-$gnutar/bin/tar -cf - $kernel/lib/modules/*/modules.* | $gnutar/bin/tar --directory=$archivesDir --strip-components 3 -xf -
-$gnutar/bin/tar -cf - $kernel/lib/modules/*/kernel/drivers/net/* | $gnutar/bin/tar --directory=$archivesDir --strip-components 3 -xf -
-
-echo creating ramdisk
-
-umask 0022
-
-$coreutils/bin/rm -f ${initrd}
-#cp ${archivesDir}/scripts/fill-disk.sh ${initdir}/init
-$coreutils/bin/cp ${archivesDir}/scripts/fill-disk.sh ${initdir}/
-$coreutils/bin/cp ${archivesDir}/scripts/ramdisk-login.sh ${initdir}/
-$coreutils/bin/cp ${archivesDir}/scripts/login.sh ${initdir}/
-$coreutils/bin/cp ${archivesDir}/scripts/init.sh ${initdir}/init
-#ln -s ${bash}/bin/bash ${initdir}/bin/sh
-$coreutils/bin/cp ${bash}/bin/bash ${initdir}/bin/sh
-$coreutils/bin/chmod u+x ${initdir}/init
-$coreutils/bin/chmod u+x ${initdir}/fill-disk.sh
-$coreutils/bin/chmod u+x ${initdir}/ramdisk-login.sh
-$coreutils/bin/chmod u+x ${initdir}/login.sh
-#cp -fau --parents ${utilLinux} ${initdir}
-#cp -fau --parents ${coreUtilsDiet} ${initdir}
-#cp -fau --parents ${modUtils} ${initdir}
-$coreutils/bin/cp -fau --parents ${bash}/bin ${initdir}
-#$coreutils/bin/cp -fau --parents ${utilLinux}/bin ${initdir}
-#$coreutils/bin/chmod -R u+w ${initdir}
-#$coreutils/bin/cp -fau --parents ${utilLinux}/sbin ${initdir}
-$coreutils/bin/cp -fau --parents ${e2fsProgs} ${initdir}
-#$coreutils/bin/cp -fau --parents ${coreutilsdiet}/bin ${initdir}
-$coreutils/bin/cp -fau --parents ${modutils}/bin ${initdir}
-$coreutils/bin/chmod -R u+w ${initdir}
-$coreutils/bin/cp -fau --parents ${modutils}/sbin ${initdir}
-$coreutils/bin/cp -fau --parents ${busybox} ${initdir}
-$coreutils/bin/cp -fau --parents ${nanoDiet} ${initdir}
-$coreutils/bin/cp -fau --parents ${ncurses} ${initdir}
-
-$coreutils/bin/touch ${archivesDir}/NIXOS
-
-(cd ${initdir}; find . |$cpio/bin/cpio -H newc -o) | $gzip/bin/gzip -9 > ${initrd}
-
-$coreutils/bin/chmod -f -R +w ${initdir}/*
-$coreutils/bin/rm -rf ${initdir}
-
-$coreutils/bin/cp ${initrd} ${archivesDir}/isolinux
-$coreutils/bin/rm -f ${initrd}
-
-echo creating ISO image
-
-$cdrtools/bin/mkisofs -rJ -o ${bootiso} -b isolinux/isolinux.bin \
-                -c isolinux/boot.cat  -no-emul-boot -boot-load-size 4 \
-                -boot-info-table ${archivesDir}
-
-# cleanup, be diskspace friendly
-
-echo cleaning up
-
-$coreutils/bin/chmod -f -R +w ${archivesDir}/*
-#rm -rf ${archivesDir}/*
diff --git a/test/make-initrd.nix b/make-initrd.nix
index a28c312564e..a28c312564e 100644
--- a/test/make-initrd.nix
+++ b/make-initrd.nix
diff --git a/test/make-initrd.sh b/make-initrd.sh
index 8d07300466b..8d07300466b 100644
--- a/test/make-initrd.sh
+++ b/make-initrd.sh
diff --git a/test/make-iso9660-image.nix b/make-iso9660-image.nix
index e98de8ffcb4..e98de8ffcb4 100644
--- a/test/make-iso9660-image.nix
+++ b/make-iso9660-image.nix
diff --git a/test/make-iso9660-image.sh b/make-iso9660-image.sh
index 9a8bef7416d..9a8bef7416d 100644
--- a/test/make-iso9660-image.sh
+++ b/make-iso9660-image.sh
diff --git a/test/modules-closure.nix b/modules-closure.nix
index 86015a8b182..86015a8b182 100644
--- a/test/modules-closure.nix
+++ b/modules-closure.nix
diff --git a/test/modules-closure.sh b/modules-closure.sh
index c5fcbba87f1..c5fcbba87f1 100644
--- a/test/modules-closure.sh
+++ b/modules-closure.sh
diff --git a/test/options.nix b/options.nix
index 4cd2f3a7343..4cd2f3a7343 100644
--- a/test/options.nix
+++ b/options.nix
diff --git a/test/paths-from-graph.sh b/paths-from-graph.sh
index 4a134cb3165..4a134cb3165 100644
--- a/test/paths-from-graph.sh
+++ b/paths-from-graph.sh
diff --git a/pkgs.nix b/pkgs.nix
deleted file mode 100644
index ea530f649d1..00000000000
--- a/pkgs.nix
+++ /dev/null
@@ -1,44 +0,0 @@
-let 
-
-  pkgs = import ./pkgs/top-level/all-packages.nix {};
-
-  # !!! copied from stdenv/linux/make-bootstrap-tools.nix.
-  pkgsToRemove = 
-    [ "binutils" "gcc" "coreutils" "findutils" "diffutils" "gnused" "gnugrep"
-      "gawk" "gnutar" "gzip" "bzip2" "gnumake" "bash" "patch" "patchelf"
-    ];
-    
-  pkgsDiet = import ./pkgs/top-level/all-packages.nix {
-    bootStdenv = removeAttrs (pkgs.useDietLibC pkgs.stdenv) pkgsToRemove;
-  };
-
-in rec {
-
-  inherit (pkgs)
-    stdenv kernelscripts kernel bash coreutils coreutilsDiet
-    findutilsWrapper utillinux utillinuxStatic sysvinit e2fsprogsDiet
-    e2fsprogs nettools nix subversion gcc wget which vim less screen
-    openssh binutils nixStatic strace shadowutils iputils gnumake curl gnused
-    gnutar gnutar151 gnugrep gzip mingettyWrapper grubWrapper syslinux parted
-    module_init_tools module_init_toolsStatic dhcpWrapper man nano nanoDiet
-    eject sysklogd mktemp cdrtools cpio busybox mkinitrd ncursesDiet;
-
-  diet = pkgsDiet;
-    
-  boot = (import ./boot) {
-    inherit stdenv bash coreutils findutilsWrapper utillinux sysvinit
-    e2fsprogs nettools subversion gcc wget which vim less screen openssh
-    strace shadowutils iputils gnumake curl gnused gnutar gnugrep gzip
-    mingettyWrapper grubWrapper parted module_init_tools dhcpWrapper man
-    nano nix;
-  };
-
-  #init = (import ./init) {inherit stdenv bash bashStatic coreutilsDiet
-  #  utillinux shadowutils mingettyWrapper grubWrapper parted module_init_tools
-  #  dhcpWrapper man nano eject e2fsprogsDiet;
-  #  nix = nixUnstable;
-  #};
-
-  everything = [boot sysvinit sysklogd kernelscripts kernel mkinitrd];
-  
-}
diff --git a/pure/devices.nix b/pure/devices.nix
deleted file mode 100644
index 140f8afb7e6..00000000000
--- a/pure/devices.nix
+++ /dev/null
@@ -1,20 +0,0 @@
-[
-  { id = "net-dev-1";
-    comment = "Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express";
-    location = {
-      busId = "pci-0000:02:00.0";
-      macAddr = "00:14:22:bc:68:51";
-      prefer = "macAddr"; # i.e., don't care if busId changes
-    };
-    extraModules = []; # tg3
-  }
-
-  { id = "keyboard-1";
-    comment = "Dell Computer Corp. SK-8125 Keyboard";
-    location = {
-      busId = "usb-003-003";
-    };
-    extraModules = [];
-  }
-  
-]
diff --git a/pure/disks.nix b/pure/disks.nix
deleted file mode 100644
index c1ad104fbd9..00000000000
--- a/pure/disks.nix
+++ /dev/null
@@ -1,84 +0,0 @@
-{
-
-  /* Old school. */
-
-  volume1 = {
-    mountPoint = "/";
-    filesystem = "ext3";
-    location = {
-      device = "/dev/hda1";
-    };
-    creationParams = {
-      disk = "/dev/hda";
-      partition = 1;
-      startCylinder = 1;
-      endCylinder = 1000;
-    };
-  };
-  
-  volume2 = {
-    filesystem = "swap";
-    location = {
-      device = "/dev/hda2";
-    };
-    creationParams = {
-      disk = "/dev/hda";
-      startCylinder = 1001;
-      endCylinder = 1100;
-    };
-  };
-
-
-  /* With partition labels; don't care which device holds the file
-    system. */
-
-  volume1 = {
-    mountPoint = "/";
-    filesystem = "auto";
-    location = {
-      label = "ROOT_DISK";
-    };
-    # Only relevant when creating.
-    creationParams = {
-      disk = "/dev/hda";
-      partition = 1;
-      startCylinder = 1;
-      endCylinder = 1000;
-      filesystem = "ext3";
-    };
-  };
-
-
-  /* LVM. */
-
-  volume1 = {
-    mountPoint = "/data";
-    filesystem = "auto";
-    location = {
-      lvmVolumeGroup = "system";
-      lvmVolumeName = "big-volume"; # -> /dev/mapper/system-big-volume
-    };
-  };
-
-  lvmConfig = {
-    devices = [
-      ...
-    ];
-    groups = [
-      { name = "system";
-        volumes = [
-          { name = "big-volume";
-            size = 1048576; # -> 1 GiB
-          }
-          { name = "blah";
-            size = 1048576; # -> 1 GiB
-          }
-        ];
-        # When realising this configuration, only delete explicitly
-        # listed volumes for safety.
-        canDelete = ["foobar"];
-      };
-    ];
-  };
-  
-}
diff --git a/pure/networking.nix b/pure/networking.nix
deleted file mode 100644
index 0f3b550a8f5..00000000000
--- a/pure/networking.nix
+++ /dev/null
@@ -1,58 +0,0 @@
-{
-
-  identification = {
-    fromDHCP = false;
-    hostname = "foobar";
-  };
-
-
-  interfaces = [
-
-    # Manual configuration.
-    { name = "eth0";
-      hardware = {
-        type = "ethernet";
-        device = "net-dev-1";
-      };
-      link = {
-        ip4 = {
-          address = "192.168.1.2";
-          nameservers = [ # to be used when this interface is up
-            "1.2.3.4";
-            "1.2.3.5";
-          ];
-          routes = [ # idem, add when up
-            { destination = "0.0.0.0";
-              netmask = "0.0.0.0";
-              gateway = "192.168.1.1";
-              # iface implied (eth0)
-            }
-            { destination = "192.168.1.0";
-              netmask = "255.255.255.0";
-              # iface implied (eth0)
-            }
-          ];
-        };
-        ip6 = ...;
-      };
-    }
-
-    # Automatic configuration via DHCP
-    { name = "eth0";
-      hardware = {
-        type = "ethernet";
-        device = "net-dev-1";
-      };
-      link = {
-        useDHCP = true;
-      };
-    }
-    
-  ];
-
-
-  firewall = {
-    # ...
-  };
-
-}
\ No newline at end of file
diff --git a/pure/top-level.nix b/pure/top-level.nix
deleted file mode 100644
index 46c220f5c8e..00000000000
--- a/pure/top-level.nix
+++ /dev/null
@@ -1,26 +0,0 @@
-rec {
-
-  devices = import ./devices.nix;
-
-  disks = import ./disks.nix;
-
-  networking = import ./networking.nix;
-
-  systemServices = [
-    terminalRunner
-    syslogServer
-    dhcpClient
-    sshServer
-    subversionServer
-  ];
-  
-  systemInit = {
-    inherit devices disks networking;
-    inherit systemServices;
-  };
-
-  kernel = import ... {
-    externalModules = [nvidia vmware ...];
-  }
-
-}
diff --git a/ramdisk-login.sh b/ramdisk-login.sh
deleted file mode 100644
index e684fc3ce26..00000000000
--- a/ramdisk-login.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#! @bash@/bin/sh -e
-
-export PATH=@bash@/bin:@coreutilsdiet@/bin:@coreutils@/bin:@findutils@/bin:@utillinux@/bin:@utillinux@/sbin:@e2fsprogs@/sbin:@grub@/sbin:@sysvinitPath@/sbin:@gnugrep@/bin:@which@/bin:@gnutar@/bin:@busybox@/bin
-
-tty=$1
-
-exec < $tty > $tty 2>&1
-
-echo
-echo "=== Welcome to Nix! ==="
-
-export HOME=/
-cd $HOME
-
-exec @bash@/bin/sh
diff --git a/test/rescue-cd.nix b/rescue-cd.nix
index 48040f6495c..48040f6495c 100644
--- a/test/rescue-cd.nix
+++ b/rescue-cd.nix
diff --git a/run.sh b/run.sh
deleted file mode 100755
index e6ec1e005e2..00000000000
--- a/run.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#! /bin/sh -e
-
-image=/tmp/disk.img
-
-linux ubd0="$image" mem=256M \
-  eth0=tuntap,tap1 \
-  init="/init"
diff --git a/test/splash-themes.nix b/splash-themes.nix
index 25be6168b37..25be6168b37 100644
--- a/test/splash-themes.nix
+++ b/splash-themes.nix
diff --git a/storepaths_format b/storepaths_format
deleted file mode 100644
index 5b71b007445..00000000000
--- a/storepaths_format
+++ /dev/null
@@ -1,13 +0,0 @@
-/nix/store/abcd-<package>
-deriver
-2
-/nix/store/1234-<package-1>
-/nix/store/5678-<package-2>
-
-Amount of dependencies determined by:
-
-nix-store -q --references p
-
-or better (for a large expression)
-
-nix-store -q --requisites p
diff --git a/test/system-configuration.nix b/system-configuration.nix
index 640f17f907e..640f17f907e 100644
--- a/test/system-configuration.nix
+++ b/system-configuration.nix
diff --git a/test/system-configuration.sh b/system-configuration.sh
index fa2e7def257..fa2e7def257 100644
--- a/test/system-configuration.sh
+++ b/system-configuration.sh
diff --git a/test/isolinux.cfg b/test/isolinux.cfg
deleted file mode 100644
index ff19e84c098..00000000000
--- a/test/isolinux.cfg
+++ /dev/null
@@ -1,6 +0,0 @@
-default linux
-prompt 1
-timeout 60
-label linux
-  kernel vmlinuz
-  append initrd=initrd selinux=0 apm=on acpi=on
diff --git a/test/upgrade.sh b/upgrade.sh
index 97dc4fa4826..97dc4fa4826 100755
--- a/test/upgrade.sh
+++ b/upgrade.sh
diff --git a/test/upstart-jobs/ctrl-alt-delete.nix b/upstart-jobs/ctrl-alt-delete.nix
index 126154bae73..126154bae73 100644
--- a/test/upstart-jobs/ctrl-alt-delete.nix
+++ b/upstart-jobs/ctrl-alt-delete.nix
diff --git a/test/upstart-jobs/dhclient.nix b/upstart-jobs/dhclient.nix
index 7ccc87615ad..7ccc87615ad 100644
--- a/test/upstart-jobs/dhclient.nix
+++ b/upstart-jobs/dhclient.nix
diff --git a/test/upstart-jobs/gather.nix b/upstart-jobs/gather.nix
index 914c78e7a89..914c78e7a89 100644
--- a/test/upstart-jobs/gather.nix
+++ b/upstart-jobs/gather.nix
diff --git a/test/upstart-jobs/halt.nix b/upstart-jobs/halt.nix
index 58be12db69c..58be12db69c 100644
--- a/test/upstart-jobs/halt.nix
+++ b/upstart-jobs/halt.nix
diff --git a/test/upstart-jobs/hardware-scan.nix b/upstart-jobs/hardware-scan.nix
index 3ffd8f9223f..3ffd8f9223f 100644
--- a/test/upstart-jobs/hardware-scan.nix
+++ b/upstart-jobs/hardware-scan.nix
diff --git a/test/upstart-jobs/maintenance-shell.nix b/upstart-jobs/maintenance-shell.nix
index 9e2acdaa0f5..9e2acdaa0f5 100644
--- a/test/upstart-jobs/maintenance-shell.nix
+++ b/upstart-jobs/maintenance-shell.nix
diff --git a/test/upstart-jobs/make-job.nix b/upstart-jobs/make-job.nix
index 3995a8f21aa..3995a8f21aa 100644
--- a/test/upstart-jobs/make-job.nix
+++ b/upstart-jobs/make-job.nix
diff --git a/test/upstart-jobs/mingetty.nix b/upstart-jobs/mingetty.nix
index cdce937535c..cdce937535c 100644
--- a/test/upstart-jobs/mingetty.nix
+++ b/upstart-jobs/mingetty.nix
diff --git a/test/upstart-jobs/network-interfaces.nix b/upstart-jobs/network-interfaces.nix
index d85c7e02001..d85c7e02001 100644
--- a/test/upstart-jobs/network-interfaces.nix
+++ b/upstart-jobs/network-interfaces.nix
diff --git a/test/upstart-jobs/sshd.nix b/upstart-jobs/sshd.nix
index 466c7616f55..466c7616f55 100644
--- a/test/upstart-jobs/sshd.nix
+++ b/upstart-jobs/sshd.nix
diff --git a/test/upstart-jobs/syslogd.nix b/upstart-jobs/syslogd.nix
index 8f326b0d6cf..8f326b0d6cf 100644
--- a/test/upstart-jobs/syslogd.nix
+++ b/upstart-jobs/syslogd.nix
diff --git a/test/upstart-jobs/tty-backgrounds-combine.sh b/upstart-jobs/tty-backgrounds-combine.sh
index 894952d6940..894952d6940 100644
--- a/test/upstart-jobs/tty-backgrounds-combine.sh
+++ b/upstart-jobs/tty-backgrounds-combine.sh
diff --git a/test/upstart-jobs/tty-backgrounds.nix b/upstart-jobs/tty-backgrounds.nix
index abe6f52305a..abe6f52305a 100644
--- a/test/upstart-jobs/tty-backgrounds.nix
+++ b/upstart-jobs/tty-backgrounds.nix