{ config, lib, pkgs, ... }: with lib; let # The splicing information needed for nativeBuildInputs isn't available # on the derivations likely to be used as `cfgc.package`. # This middle-ground solution ensures *an* sshd can do their basic validation # on the configuration. validationPackage = if pkgs.stdenv.buildPlatform == pkgs.stdenv.hostPlatform then cfgc.package else pkgs.buildPackages.openssh; sshconf = pkgs.runCommand "sshd.conf-validated" { nativeBuildInputs = [ validationPackage ]; } '' cat >$out <keys and keyFiles options. Warning: If you are using NixOps then don't use this option since it will replace the key required for deployment via ssh. ''; }; keyFiles = mkOption { type = types.listOf types.path; default = []; description = '' A list of files each containing one OpenSSH public key that should be added to the user's authorized keys. The contents of the files are read at build time and added to a file that the SSH daemon reads in addition to the the user's authorized_keys file. You can combine the keyFiles and keys options. ''; }; }; }; authKeysFiles = let mkAuthKeyFile = u: nameValuePair "ssh/authorized_keys.d/${u.name}" { mode = "0444"; source = pkgs.writeText "${u.name}-authorized_keys" '' ${concatStringsSep "\n" u.openssh.authorizedKeys.keys} ${concatMapStrings (f: readFile f + "\n") u.openssh.authorizedKeys.keyFiles} ''; }; usersWithKeys = attrValues (flip filterAttrs config.users.users (n: u: length u.openssh.authorizedKeys.keys != 0 || length u.openssh.authorizedKeys.keyFiles != 0 )); in listToAttrs (map mkAuthKeyFile usersWithKeys); in { imports = [ (mkAliasOptionModule [ "services" "sshd" "enable" ] [ "services" "openssh" "enable" ]) (mkAliasOptionModule [ "services" "openssh" "knownHosts" ] [ "programs" "ssh" "knownHosts" ]) ]; ###### interface options = { services.openssh = { enable = mkOption { type = types.bool; default = false; description = '' Whether to enable the OpenSSH secure shell daemon, which allows secure remote logins. ''; }; startWhenNeeded = mkOption { type = types.bool; default = false; description = '' If set, sshd is socket-activated; that is, instead of having it permanently running as a daemon, systemd will start an instance for each incoming connection. ''; }; forwardX11 = mkOption { type = types.bool; default = false; description = '' Whether to allow X11 connections to be forwarded. ''; }; allowSFTP = mkOption { type = types.bool; default = true; description = '' Whether to enable the SFTP subsystem in the SSH daemon. This enables the use of commands such as sftp and sshfs. ''; }; sftpFlags = mkOption { type = with types; listOf str; default = []; example = [ "-f AUTHPRIV" "-l INFO" ]; description = '' Commandline flags to add to sftp-server. ''; }; permitRootLogin = mkOption { default = "prohibit-password"; type = types.enum ["yes" "without-password" "prohibit-password" "forced-commands-only" "no"]; description = '' Whether the root user can login using ssh. ''; }; gatewayPorts = mkOption { type = types.str; default = "no"; description = '' Specifies whether remote hosts are allowed to connect to ports forwarded for the client. See sshd_config 5. ''; }; ports = mkOption { type = types.listOf types.port; default = [22]; description = '' Specifies on which ports the SSH daemon listens. ''; }; openFirewall = mkOption { type = types.bool; default = true; description = '' Whether to automatically open the specified ports in the firewall. ''; }; listenAddresses = mkOption { type = with types; listOf (submodule { options = { addr = mkOption { type = types.nullOr types.str; default = null; description = '' Host, IPv4 or IPv6 address to listen to. ''; }; port = mkOption { type = types.nullOr types.int; default = null; description = '' Port to listen to. ''; }; }; }); default = []; example = [ { addr = "192.168.3.1"; port = 22; } { addr = "0.0.0.0"; port = 64022; } ]; description = '' List of addresses and ports to listen on (ListenAddress directive in config). If port is not specified for address sshd will listen on all ports specified by ports option. NOTE: this will override default listening on all local addresses and port 22. NOTE: setting this option won't automatically enable given ports in firewall configuration. ''; }; passwordAuthentication = mkOption { type = types.bool; default = true; description = '' Specifies whether password authentication is allowed. ''; }; challengeResponseAuthentication = mkOption { type = types.bool; default = true; description = '' Specifies whether challenge/response authentication is allowed. ''; }; hostKeys = mkOption { type = types.listOf types.attrs; default = [ { type = "rsa"; bits = 4096; path = "/etc/ssh/ssh_host_rsa_key"; } { type = "ed25519"; path = "/etc/ssh/ssh_host_ed25519_key"; } ]; example = [ { type = "rsa"; bits = 4096; path = "/etc/ssh/ssh_host_rsa_key"; rounds = 100; openSSHFormat = true; } { type = "ed25519"; path = "/etc/ssh/ssh_host_ed25519_key"; rounds = 100; comment = "key comment"; } ]; description = '' NixOS can automatically generate SSH host keys. This option specifies the path, type and size of each key. See ssh-keygen 1 for supported types and sizes. ''; }; authorizedKeysFiles = mkOption { type = types.listOf types.str; default = []; description = "Files from which authorized keys are read."; }; authorizedKeysCommand = mkOption { type = types.str; default = "none"; description = '' Specifies a program to be used to look up the user's public keys. The program must be owned by root, not writable by group or others and specified by an absolute path. ''; }; authorizedKeysCommandUser = mkOption { type = types.str; default = "nobody"; description = '' Specifies the user under whose account the AuthorizedKeysCommand is run. It is recommended to use a dedicated user that has no other role on the host than running authorized keys commands. ''; }; kexAlgorithms = mkOption { type = types.listOf types.str; default = [ "curve25519-sha256@libssh.org" "diffie-hellman-group-exchange-sha256" ]; description = '' Allowed key exchange algorithms Defaults to recommended settings from both and ''; }; ciphers = mkOption { type = types.listOf types.str; default = [ "chacha20-poly1305@openssh.com" "aes256-gcm@openssh.com" "aes128-gcm@openssh.com" "aes256-ctr" "aes192-ctr" "aes128-ctr" ]; description = '' Allowed ciphers Defaults to recommended settings from both and ''; }; macs = mkOption { type = types.listOf types.str; default = [ "hmac-sha2-512-etm@openssh.com" "hmac-sha2-256-etm@openssh.com" "umac-128-etm@openssh.com" "hmac-sha2-512" "hmac-sha2-256" "umac-128@openssh.com" ]; description = '' Allowed MACs Defaults to recommended settings from both and ''; }; logLevel = mkOption { type = types.enum [ "QUIET" "FATAL" "ERROR" "INFO" "VERBOSE" "DEBUG" "DEBUG1" "DEBUG2" "DEBUG3" ]; default = "VERBOSE"; description = '' Gives the verbosity level that is used when logging messages from sshd(8). The possible values are: QUIET, FATAL, ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3. The default is VERBOSE. DEBUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 each specify higher levels of debugging output. Logging with a DEBUG level violates the privacy of users and is not recommended. LogLevel VERBOSE logs user's key fingerprint on login. Needed to have a clear audit track of which key was used to log in. ''; }; useDns = mkOption { type = types.bool; default = false; description = '' Specifies whether sshd(8) should look up the remote host name, and to check that the resolved host name for the remote IP address maps back to the very same IP address. If this option is set to no (the default) then only addresses and not host names may be used in ~/.ssh/authorized_keys from and sshd_config Match Host directives. ''; }; extraConfig = mkOption { type = types.lines; default = ""; description = "Verbatim contents of sshd_config."; }; moduliFile = mkOption { example = "/etc/my-local-ssh-moduli;"; type = types.path; description = '' Path to moduli file to install in /etc/ssh/moduli. If this option is unset, then the moduli file shipped with OpenSSH will be used. ''; }; }; users.users = mkOption { type = with types; loaOf (submodule userOptions); }; }; ###### implementation config = mkIf cfg.enable { users.users.sshd = { isSystemUser = true; description = "SSH privilege separation user"; }; services.openssh.moduliFile = mkDefault "${cfgc.package}/etc/ssh/moduli"; environment.etc = authKeysFiles // { "ssh/moduli".source = cfg.moduliFile; "ssh/sshd_config".source = sshconf; }; systemd = let service = { description = "SSH Daemon"; wantedBy = optional (!cfg.startWhenNeeded) "multi-user.target"; after = [ "network.target" ]; stopIfChanged = false; path = [ cfgc.package pkgs.gawk ]; environment.LD_LIBRARY_PATH = nssModulesPath; restartTriggers = optionals (!cfg.startWhenNeeded) [ config.environment.etc."ssh/sshd_config".source ]; preStart = '' # Make sure we don't write to stdout, since in case of # socket activation, it goes to the remote side (#19589). exec >&2 mkdir -m 0755 -p /etc/ssh ${flip concatMapStrings cfg.hostKeys (k: '' if ! [ -f "${k.path}" ]; then ssh-keygen \ -t "${k.type}" \ ${if k ? bits then "-b ${toString k.bits}" else ""} \ ${if k ? rounds then "-a ${toString k.rounds}" else ""} \ ${if k ? comment then "-C '${k.comment}'" else ""} \ ${if k ? openSSHFormat && k.openSSHFormat then "-o" else ""} \ -f "${k.path}" \ -N "" fi '')} ''; serviceConfig = { ExecStart = (optionalString cfg.startWhenNeeded "-") + "${cfgc.package}/bin/sshd " + (optionalString cfg.startWhenNeeded "-i ") + "-f /etc/ssh/sshd_config"; KillMode = "process"; } // (if cfg.startWhenNeeded then { StandardInput = "socket"; StandardError = "journal"; } else { Restart = "always"; Type = "simple"; }); }; in if cfg.startWhenNeeded then { sockets.sshd = { description = "SSH Socket"; wantedBy = [ "sockets.target" ]; socketConfig.ListenStream = if cfg.listenAddresses != [] then map (l: "${l.addr}:${toString (if l.port != null then l.port else 22)}") cfg.listenAddresses else cfg.ports; socketConfig.Accept = true; }; services."sshd@" = service; } else { services.sshd = service; }; networking.firewall.allowedTCPPorts = if cfg.openFirewall then cfg.ports else []; security.pam.services.sshd = { startSession = true; showMotd = true; unixAuth = cfg.passwordAuthentication; }; # These values are merged with the ones defined externally, see: # https://github.com/NixOS/nixpkgs/pull/10155 # https://github.com/NixOS/nixpkgs/pull/41745 services.openssh.authorizedKeysFiles = [ ".ssh/authorized_keys" ".ssh/authorized_keys2" "/etc/ssh/authorized_keys.d/%u" ]; services.openssh.extraConfig = mkOrder 0 '' UsePAM yes AddressFamily ${if config.networking.enableIPv6 then "any" else "inet"} ${concatMapStrings (port: '' Port ${toString port} '') cfg.ports} ${concatMapStrings ({ port, addr, ... }: '' ListenAddress ${addr}${if port != null then ":" + toString port else ""} '') cfg.listenAddresses} ${optionalString cfgc.setXAuthLocation '' XAuthLocation ${pkgs.xorg.xauth}/bin/xauth ''} ${if cfg.forwardX11 then '' X11Forwarding yes '' else '' X11Forwarding no ''} ${optionalString cfg.allowSFTP '' Subsystem sftp ${cfgc.package}/libexec/sftp-server ${concatStringsSep " " cfg.sftpFlags} ''} PermitRootLogin ${cfg.permitRootLogin} GatewayPorts ${cfg.gatewayPorts} PasswordAuthentication ${if cfg.passwordAuthentication then "yes" else "no"} ChallengeResponseAuthentication ${if cfg.challengeResponseAuthentication then "yes" else "no"} PrintMotd no # handled by pam_motd AuthorizedKeysFile ${toString cfg.authorizedKeysFiles} ${optionalString (cfg.authorizedKeysCommand != "none") '' AuthorizedKeysCommand ${cfg.authorizedKeysCommand} AuthorizedKeysCommandUser ${cfg.authorizedKeysCommandUser} ''} ${flip concatMapStrings cfg.hostKeys (k: '' HostKey ${k.path} '')} KexAlgorithms ${concatStringsSep "," cfg.kexAlgorithms} Ciphers ${concatStringsSep "," cfg.ciphers} MACs ${concatStringsSep "," cfg.macs} LogLevel ${cfg.logLevel} ${if cfg.useDns then '' UseDNS yes '' else '' UseDNS no ''} ''; assertions = [{ assertion = if cfg.forwardX11 then cfgc.setXAuthLocation else true; message = "cannot enable X11 forwarding without setting xauth location";}] ++ forEach cfg.listenAddresses ({ addr, ... }: { assertion = addr != null; message = "addr must be specified in each listenAddresses entry"; }); }; }