Release 19.09 (“Loris”, 2019/09/??)
Highlights In addition to numerous new and upgraded packages, this release has the following highlights: End of support is planned for end of April 2020, handing over to 20.03. PHP now defaults to PHP 7.3, updated from 7.2. PHP 7.1 is no longer supported due to upstream not supporting this version for the entire lifecycle of the 19.09 release. The binfmt module is now easier to use. Additional systems can be added through . For instance, boot.binfmt.emulatedSystems = [ "wasm32-wasi" "x86_64-windows" "aarch64-linux" ]; will set up binfmt interpreters for each of those listed systems. The installer now uses a less privileged nixos user whereas before we logged in as root. To gain root privileges use sudo -i without a password. We've updated to Xfce 4.14, which brings a new module . If you'd like to upgrade, please switch from the module as it will be deprecated in a future release. They're incompatibilities with the current Xfce module; it doesn't support and it isn't recommended to use and simultaneously or to downgrade from Xfce 4.14 after upgrading. The GNOME 3 desktop manager module sports an interface to enable/disable core services, applications, and optional GNOME packages like games. This can be achieved with the following options which the desktop manager default enables, excluding games. services.gnome3.core-os-services.enable services.gnome3.core-shell.enable services.gnome3.core-utilities.enable services.gnome3.games.enable With these options we hope to give users finer grained control over their systems. Prior to this change you'd either have to manually disable options or use which only excluded the optional applications. is now unguarded, it can exclude any package installed with in the GNOME 3 module. Orthogonal to the previous changes to the GNOME 3 desktop manager module, we've updated all default services and applications to match as close as possible to a default reference GNOME 3 experience. The following changes were enacted in Applications removed from defaults: accerciser dconf-editor evolution gnome-documents gnome-nettool gnome-power-manager gnome-todo gnome-tweaks gnome-usage gucharmap nautilus-sendto vinagre Applications added to defaults: cheese geary The following changes were enacted in Applications added to defaults: gnome-color-manager orca Services enabled:
New Services The following new services were added since the last release: ./programs/dwm-status.nix The new hardware.printers module allows to declaratively configure CUPS printers via the ensurePrinters and ensureDefaultPrinter options. ensurePrinters will never delete existing printers, but will make sure that the given printers are configured as declared.
Backward Incompatibilities When upgrading from a previous release, please be aware of the following incompatible changes: Buildbot no longer supports Python 2, as support was dropped upstream in version 2.0.0. Configurations may need to be modified to make them compatible with Python 3. PostgreSQL now uses /run/postgresql as its socket directory instead of /tmp. So if you run an application like eg. Nextcloud, where you need to use the Unix socket path as the database host name, you need to change it accordingly. The options and have been removed because the alertmanager service is now using systemd's DynamicUser mechanism which obviates these options. The NetworkManager systemd unit was renamed back from network-manager.service to NetworkManager.service for better compatibility with other applications expecting this name. The same applies to ModemManager where modem-manager.service is now called ModemManager.service again. The and options were removed as they are managed internally by the nzbget. The option hadn't actually been used by the module for some time and so was removed as cleanup. The option was removed, as it was only used by the wordpress apache-httpd service to wait for mysql to have started up. This can be accomplished by either describing a dependency on mysql.service (preferred) or waiting for the (hardcoded) /run/mysqld/mysql.sock file to appear. The module has been removed, see instead for a free software fork of Emby. See the Jellyfin documentation: Migrating from Emby to Jellyfin IPv6 Privacy Extensions are now enabled by default for undeclared interfaces. The previous behaviour was quite misleading — even though the default value for was true, undeclared interfaces would not prefer temporary addresses. Now, interfaces not mentioned in the config will prefer temporary addresses. EUI64 addresses can still be set as preferred by explicitly setting the option to false for the interface in question. Since Bittorrent Sync was superseded by Resilio Sync in 2016, the bittorrentSync, bittorrentSync14, and bittorrentSync16 packages have been removed in favor of resilio-sync. The corresponding module, has been replaced by the module. The httpd service no longer attempts to start the postgresql service. If you have come to depend on this behaviour then you can preserve the behavior with the following configuration: systemd.services.httpd.after = [ "postgresql.service" ]; The option has been marked as deprecated. You may still use this feature, but it will be removed in a future release of NixOS. You are encouraged to convert any httpd subservices you may have written to a full NixOS module. Most of the httpd subservices packaged with NixOS have been replaced with full NixOS modules including LimeSurvey, WordPress, and Zabbix. These modules can be enabled using the , , , and options. The option was renamed to (capital L). This follows upstreams renaming of the setting. As of this release the NixOps feature autoLuks is deprecated. It no longer works with our systemd version without manual intervention. Whenever the usage of the module is detected the evaluation will fail with a message explaining why and how to deal with the situation. A new knob named nixops.enableDeprecatedAutoLuks has been introduced to disable the eval failure and to acknowledge the notice was received and read. If you plan on using the feature please note that it might break with subsequent updates. Make sure you set the _netdev option for each of the file systems referring to block devices provided by the autoLuks module. Not doing this might render the system in a state where it doesn't boot anymore. If you are actively using the autoLuks module please let us know in issue #62211. The setopt declarations will be evaluated at the end of /etc/zshrc, so any code in , and may break if it relies on those options being set. The prometheus-nginx-exporter package now uses the offical exporter provided by NGINX Inc. Its metrics are differently structured and are incompatible to the old ones. For information about the metrics, have a look at the official repo. The shibboleth-sp package has been updated to version 3. It is largely backward compatible, for further information refer to the release notes and upgrade guide. Nodejs 8 is scheduled EOL under the lifetime of 19.09 and has been dropped. By default, prometheus exporters are now run with DynamicUser enabled. Exporters that need a real user, now run under a seperate user and group which follow the pattern <exporter-name>-exporter, instead of the previous default nobody and nogroup. Only some exporters are affected by the latter, namely the exporters dovecot, node, postfix and varnish. The ibus-qt package is not installed by default anymore when is set to ibus. If IBus support in Qt 4.x applications is required, add the ibus-qt package to your manually. The CUPS Printing service now uses socket-based activation by default, only starting when needed. The previous behavior can be restored by setting to false. The module has been removed from nixpkgs due to lack of maintainer. The module has been removed from nixpkgs due to lack of maintainer. Squid 3 has been removed and the derivation now refers to Squid 4. The option has been replaced by . The new option allows setting extra configuration while being better type-checked and mergeable. No service depends on keys.target anymore which is a systemd target that indicates if all NixOps keys were successfully uploaded. Instead, <key-name>-key.service should be used to define a dependency of a key in a service. The full issue behind the keys.target dependency is described at NixOS/nixpkgs#67265. The following services are affected by this: services.dovecot2 services.nsd services.softether services.strongswan services.strongswan-swanctl services.httpd The option has been replaced by a read-only option for each certificate you define. This will be a subdirectory of /var/lib/acme. You can use this read-only option to figure out where the certificates are stored for a specific certificate. For example, the option will use this directory option to find the certs for the virtual host. and options have been removed. To execute a service before certificates are provisioned or renewed add a RequiredBy=acme-${cert}.service to any service. Furthermore, the acme module will not automatically add a dependency on lighttpd.service anymore. If you are using certficates provided by letsencrypt for lighttpd, then you should depend on the certificate service acme-${cert}.service> manually. For nginx, the dependencies are still automatically managed when is enabled just like before. What changed is that nginx now directly depends on the specific certificates that it needs, instead of depending on the catch-all acme-certificates.target. This target unit was also removed from the codebase. This will mean nginx will no longer depend on certificates it isn't explicitly managing and fixes a bug with certificate renewal ordering racing with nginx restarting which could lead to nginx getting in a broken state as described at NixOS/nixpkgs#60180. The old deprecated emacs package sets have been dropped. What used to be called emacsPackagesNg is now simply called emacsPackages. is now disabled by default. It was not useful except for debugging purposes and was confusingly set as default in some circumstances. The WeeChat plugin pkgs.weechatScripts.weechat-xmpp has been removed as it doesn't receive any updates from upstream and depends on outdated Python2-based modules.
Other Notable Changes The module gained an option named which makes the generated configuration.nix 5 manual page include all options from all NixOS modules included in a given configuration.nix configuration file. Currently, it is set to false by default as enabling it frequently prevents evaluation. But the plan is to eventually have it set to true by default. Please set it to true now in your configuration.nix and fix all the bugs it uncovers. The vlc package gained support for Chromecast streaming, enabled by default. TCP port 8010 must be open for it to work, so something like networking.firewall.allowedTCPPorts = [ 8010 ]; may be required in your configuration. Also consider enabling Accelerated Video Playback for better transcoding performance. The following changes apply if the stateVersion is changed to 19.09 or higher. For stateVersion = "19.03" or lower the old behavior is preserved. solr.package defaults to pkgs.solr_8. The hunspellDicts.fr-any dictionary now ships with fr_FR.{aff,dic} which is linked to fr-toutesvariantes.{aff,dic}. The mysql service now runs as mysql user. Previously, systemd did execute it as root, and mysql dropped privileges itself. This includes ExecStartPre= and ExecStartPost= phases. To accomplish that, runtime and data directory setup was delegated to RuntimeDirectory and tmpfiles. With the upgrade to systemd version 242 the systemd-timesyncd service is no longer using DynamicUser=yes. In order for the upgrade to work we rely on an activation script to move the state from the old to the new directory. The older directory (prior 19.09) was /var/lib/private/systemd/timesync. As long as the system.config.stateVersion is below 19.09 the state folder will migrated to its proper location (/var/lib/systemd/timesync), if required. The package avahi is now built to look up service definitions from /etc/avahi/services instead of its output directory in the nix store. Accordingly the module now supports custom service definitions via , which are then placed in the aforementioned directory. See avahi.service5 for more information on custom service definitions. Since version 0.1.19, cargo-vendor honors package includes that are specified in the Cargo.toml file of Rust crates. rustPlatform.buildRustPackage uses cargo-vendor to collect and build dependent crates. Since this change in cargo-vendor changes the set of vendored files for most Rust packages, the hash that use used to verify the dependencies, cargoSha256, also changes. The cargoSha256 hashes of all in-tree derivations that use buildRustPackage have been updated to reflect this change. However, third-party derivations that use buildRustPackage may have to be updated as well. The consul package was upgraded past version 1.5, so its deprecated legacy UI is no longer available. The default resample-method for PulseAudio has been changed from the upstream default speex-float-1 to speex-float-5. Be aware that low-powered ARM-based and MIPS-based boards will struggle with this so you'll need to set back to speex-float-1. The phabricator package and associated httpd.extraSubservice, as well as the phd service have been removed from nixpkgs due to lack of maintainer. The mercurial httpd.extraSubservice has been removed from nixpkgs due to lack of maintainer. The trac httpd.extraSubservice has been removed from nixpkgs because it was unmaintained. The foswiki package and associated httpd.extraSubservice have been removed from nixpkgs due to lack of maintainer. The tomcat-connector httpd.extraSubservice has been removed from nixpkgs. It's now possible to change configuration in services.nextcloud after the initial deploy since all config parameters are persisted in an additional config file generated by the module. Previously core configuration like database parameters were set using their imperative installer after creating /var/lib/nextcloud. There exists now lib.forEach, which is like map, but with arguments flipped. When mapping function body spans many lines (or has nested maps), it is often hard to follow which list is modified. Previous solution to this problem was either to use lib.flip map idiom or extract that anonymous mapping function to a named one. Both can still be used but lib.forEach is preferred over lib.flip map. The /etc/sysctl.d/nixos.conf file containing all the options set via boot.kernel.sysctl was moved to /etc/sysctl.d/60-nixos.conf, as sysctl.d5 recommends prefixing all filenames in /etc/sysctl.d with a two-digit number and a dash to simplify the ordering of the files. We now install the sysctl snippets shipped with systemd. This enables: Loose reverse path filtering Source route filtering fq_codel as a packet scheduler (this helps to fight bufferbloat) This also configures the kernel to pass coredumps to systemd-coredump, and restricts the SysRq key combinations to the sync command only. These sysctl snippets can be found in /etc/sysctl.d/50-*.conf, and overridden via boot.kernel.sysctl (which will place the parameters in /etc/sysctl.d/60-nixos.conf). Coredumps are now acquired by systemd-coredump by default. systemd-coredump behaviour can still be modified via . To stick to the old behaviour (having the kernel dump to a file called core in the working directory), without piping it through systemd-coredump, set to "core". systemd.packages option now also supports generators and shutdown scripts. Old systemd.generator-packages option has been removed. The rmilter package was removed with associated module and options due deprecation by upstream developer. Use rspamd in proxy mode instead. systemd cgroup accounting via the systemd.enableCgroupAccounting option is now enabled by default. It now also enables the more recent Block IO and IP accounting features. We no longer enable custom font rendering settings with by default. The defaults from fontconfig are sufficient. The crashplan package and the crashplan service have been removed from nixpkgs due to crashplan shutting down the service, while the crashplansb package and crashplan-small-business service have been removed from nixpkgs due to lack of maintainer. The redis module was hardcoded to use the redis user, /run/redis as runtime directory and /var/lib/redis as state directory. Note that the NixOS module for Redis now disables kernel support for Transparent Huge Pages (THP), because this features causes major performance problems for Redis, e.g. (https://redis.io/topics/latency). Using adds a default emoji font noto-fonts-emoji. Users of the following options will have this enabled by default: The altcoins categorization of packages has been removed. You now access these packages at the top level, ie. nix-shell -p dogecoin instead of nix-shell -p altcoins.dogecoin, etc. Ceph has been upgraded to v14.2.1. See the release notes for details. The mgr dashboard as well as osds backed by loop-devices is no longer explicitly supported by the package and module. Note: There's been some issues with python-cherrypy, which is used by the dashboard and prometheus mgr modules (and possibly others), hence 0000-dont-check-cherrypy-version.patch. pkgs.weechat is now compiled against pkgs.python3. Weechat also recommends to use Python3 in their docs.