The Standard Environment The standard build environment in the Nix Packages collection provides an environment for building Unix packages that does a lot of common build tasks automatically. In fact, for Unix packages that use the standard ./configure; make; make install build interface, you don’t need to write a build script at all; the standard environment does everything automatically. If stdenv doesn’t do what you need automatically, you can easily customise or override the various build phases.
Using <literal>stdenv</literal> To build a package with the standard environment, you use the function stdenv.mkDerivation, instead of the primitive built-in function derivation, e.g. stdenv.mkDerivation { name = "libfoo-1.2.3"; src = fetchurl { url = http://example.org/libfoo-1.2.3.tar.bz2; sha256 = "0x2g1jqygyr5wiwg4ma1nd7w4ydpy82z9gkcv8vh2v8dn3y58v5m"; }; } (stdenv needs to be in scope, so if you write this in a separate Nix expression from pkgs/all-packages.nix, you need to pass it as a function argument.) Specifying a name and a src is the absolute minimum you need to do. Many packages have dependencies that are not provided in the standard environment. It’s usually sufficient to specify those dependencies in the buildInputs attribute: stdenv.mkDerivation { name = "libfoo-1.2.3"; ... buildInputs = [libbar perl ncurses]; } This attribute ensures that the bin subdirectories of these packages appear in the PATH environment variable during the build, that their include subdirectories are searched by the C compiler, and so on. (See for details.) Often it is necessary to override or modify some aspect of the build. To make this easier, the standard environment breaks the package build into a number of phases, all of which can be overridden or modified individually: unpacking the sources, applying patches, configuring, building, and installing. (There are some others; see .) For instance, a package that doesn’t supply a makefile but instead has to be compiled “manually” could be handled like this: stdenv.mkDerivation { name = "fnord-4.5"; ... buildPhase = '' gcc foo.c -o foo ''; installPhase = '' mkdir -p $out/bin cp foo $out/bin ''; } (Note the use of ''-style string literals, which are very convenient for large multi-line script fragments because they don’t need escaping of " and \, and because indentation is intelligently removed.) There are many other attributes to customise the build. These are listed in . While the standard environment provides a generic builder, you can still supply your own build script: stdenv.mkDerivation { name = "libfoo-1.2.3"; ... builder = ./builder.sh; } where the builder can do anything it wants, but typically starts with source $stdenv/setup to let stdenv set up the environment (e.g., process the buildInputs). If you want, you can still use stdenv’s generic builder: source $stdenv/setup buildPhase() { echo "... this is my custom build phase ..." gcc foo.c -o foo } installPhase() { mkdir -p $out/bin cp foo $out/bin } genericBuild
Tools provided by <literal>stdenv</literal> The standard environment provides the following packages: The GNU C Compiler, configured with C and C++ support. GNU coreutils (contains a few dozen standard Unix commands). GNU findutils (contains find). GNU diffutils (contains diff, cmp). GNU sed. GNU grep. GNU awk. GNU tar. gzip, bzip2 and xz. GNU Make. It has been patched to provide nested output that can be fed into the nix-log2xml command and log2html stylesheet to create a structured, readable output of the build steps performed by Make. Bash. This is the shell used for all builders in the Nix Packages collection. Not using /bin/sh removes a large source of portability problems. The patch command. On Linux, stdenv also includes the patchelf utility.
Specifying dependencies As described in the Nix manual, almost any *.drv store path in a derivation's attribute set will induce a dependency on that derivation. mkDerivation, however, takes a few attributes intended to, between them, include all the dependencies of a package. This is done both for structure and consistency, but also so that certain other setup can take place. For example, certain dependencies need their bin directories added to the PATH. That is built-in, but other setup is done via a pluggable mechanism that works in conjunction with these dependency attributes. See for details. Dependencies can be broken down along three axes: their host and target platforms relative to the new derivation's, and whether they are propagated. The platform distinctions are motivated by cross compilation; see for exactly what each platform means. The build platform is ignored because it is a mere implementation detail of the package satisfying the dependency: As a general programming principle, dependencies are always specified as interfaces, not concrete implementation. But even if one is not cross compiling, the platforms imply whether or not the dependency is needed at run-time or build-time, a concept that makes perfect sense outside of cross compilation. For now, the run-time/build-time distinction is just a hint for mental clarity, but in the future it perhaps could be enforced. The extension of PATH with dependencies, alluded to above, proceeds according to the relative platforms alone. The process is carried out only for dependencies whose host platform matches the new derivation's build platform–i.e. which run on the platform where the new derivation will be built. Currently, that means for native builds all dependencies are put on the PATH. But in the future that may not be the case for sake of matching cross: the platforms would be assumed to be unique for native and cross builds alike, so only the depsBuild* and nativeBuildDependencies dependencies would affect the PATH. For each dependency dep of those dependencies, dep/bin, if present, is added to the PATH environment variable. The dependency is propagated when it forces some of its other-transitive (non-immediate) downstream dependencies to also take it on as an immediate dependency. Nix itself already takes a package's transitive dependencies into account, but this propagation ensures nixpkgs-specific infrastructure like setup hooks (mentioned above) also are run as if the propagated dependency. It is important to note dependencies are not necessary propagated as the same sort of dependency that they were before, but rather as the corresponding sort so that the platform rules still line up. The exact rules for dependency propagation can be given by assigning each sort of dependency two integers based one how it's host and target platforms are offset from the depending derivation's platforms. Those offsets are given are given below in the descriptions of each dependency list attribute. Algorithmically, we traverse propagated inputs, accumulating every propagated dep's propagated deps and adjusting them to account for the "shift in perspective" described by the current dep's platform offsets. This results in sort a transitive closure of the dependency relation, with the offsets being approximately summed when two dependency links are combined. We also prune transitive deps whose combined offsets go out-of-bounds, which can be viewed as a filter over that transitive closure removing dependencies that are blatantly absurd. We can define the process precisely with Natural Deduction using the inference rules. This probably seems a bit obtuse, but so is the bash code that actually implements it! The findInputs function, currently residing in pkgs/stdenv/generic/setup.sh, implements the propagation logic. They're confusing in very different ways so...hopefully if something doesn't make sense in one presentation, it does in the other! let mapOffset(h, t, i) = i + (if i <= 0 then h else t - 1) propagated-dep(h0, t0, A, B) propagated-dep(h1, t1, B, C) h0 + h1 in {-1, 0, 1} h0 + t1 in {-1, 0, 1} -------------------------------------- Transitive property propagated-dep(mapOffset(h0, t0, h1), mapOffset(h0, t0, t1), A, C) let mapOffset(h, t, i) = i + (if i <= 0 then h else t - 1) dep(h0, _, A, B) propagated-dep(h1, t1, B, C) h0 + h1 in {-1, 0, 1} h0 + t1 in {-1, 0, -1} -------------------------------------- Take immediate deps' propagated deps propagated-dep(mapOffset(h0, t0, h1), mapOffset(h0, t0, t1), A, C) propagated-dep(h, t, A, B) -------------------------------------- Propagated deps count as deps dep(h, t, A, B) Some explanation of this monstrosity is in order. In the common case, the target offset of a dependency is the successor to the target offset: t = h + 1. That means that: let f(h, t, i) = i + (if i <= 0 then h else t - 1) let f(h, h + 1, i) = i + (if i <= 0 then h else (h + 1) - 1) let f(h, h + 1, i) = i + (if i <= 0 then h else h) let f(h, h + 1, i) = i + h This is where the "sum-like" comes from above: We can just sum all the host offset to get the host offset of the transitive dependency. The target offset is the transitive dep is simply the host offset + 1, just as it was with the dependencies composed to make this transitive one; it can be ignored as it doesn't add any new information. Because of the bounds checks, the uncommon cases are h = t and h + 2 = t. In the former case, the motivation for mapOffset is that since its host and target platforms are the same, no transitive dep of it should be able to "discover" an offset greater than its reduced target offsets. mapOffset effectively "squashes" all its transitive dependencies' offsets so that none will ever be greater than the target offset of the original h = t package. In the other case, h + 1 is skipped over between the host and target offsets. Instead of squashing the offsets, we need to "rip" them apart so no transitive dependencies' offset is that one. Overall, the unifying theme here is that propagation shouldn't be introducing transitive dependencies involving platforms the needing package is unaware of. The offset bounds checking and definition of mapOffset together ensure that this is the case. Discovering a new offset is discovering a new platform, and since those platforms weren't in the derivation "spec" of the needing package, they cannot be relevant. From a capability perspective, we can imagine that the host and target platforms of a package are the capabilities a package requires, and the depending package must provide the capability to the dependency. Variables specifying dependencies depsBuildBuild A list of dependencies whose host and target platforms are the new derivation's build platform. This means a -1 host and -1 target offset from the new derivation's platforms. They are programs/libraries used at build time that furthermore produce programs/libraries also used at build time. If the dependency doesn't care about the target platform (i.e. isn't a compiler or similar tool), put it in nativeBuildInputsinstead. The most common use for this buildPackages.stdenv.cc, the default C compiler for this role. That example crops up more than one might think in old commonly used C libraries. Since these packages are able to be run at build time, that are always added to the PATH, as described above. But since these packages are only guaranteed to be able to run then, they shouldn't persist as run-time dependencies. This isn't currently enforced, but could be in the future. nativeBuildInputs A list of dependencies whose host platform is the new derivation's build platform, and target platform is the new derivation's host platform. This means a -1 host offset and 0 target offset from the new derivation's platforms. They are programs/libraries used at build time that, if they are a compiler or similar tool, produce code to run at run time—i.e. tools used to build the new derivation. If the dependency doesn't care about the target platform (i.e. isn't a compiler or similar tool), put it here, rather than in depsBuildBuild or depsBuildTarget. This would be called depsBuildHost but for historical continuity. Since these packages are able to be run at build time, that are added to the PATH, as described above. But since these packages only are guaranteed to be able to run then, they shouldn't persist as run-time dependencies. This isn't currently enforced, but could be in the future. depsBuildTarget A list of dependencies whose host platform is the new derivation's build platform, and target platform is the new derivation's target platform. This means a -1 host offset and 1 target offset from the new derivation's platforms. They are programs used at build time that produce code to run at run with code produced by the depending package. Most commonly, these would tools used to build the runtime or standard library the currently-being-built compiler will inject into any code it compiles. In many cases, the currently-being built compiler is itself employed for that task, but when that compiler won't run (i.e. its build and host platform differ) this is not possible. Other times, the compiler relies on some other tool, like binutils, that is always built separately so the dependency is unconditional. This is a somewhat confusing dependency to wrap ones head around, and for good reason. As the only one where the platform offsets are not adjacent integers, it requires thinking of a bootstrapping stage two away from the current one. It and it's use-case go hand in hand and are both considered poor form: try not to need this sort dependency, and try not avoid building standard libraries / runtimes in the same derivation as the compiler produces code using them. Instead strive to build those like a normal library, using the newly-built compiler just as a normal library would. In short, do not use this attribute unless you are packaging a compiler and are sure it is needed. Since these packages are able to be run at build time, that are added to the PATH, as described above. But since these packages only are guaranteed to be able to run then, they shouldn't persist as run-time dependencies. This isn't currently enforced, but could be in the future. depsHostHost A list of dependencies whose host and target platforms match the new derivation's host platform. This means a both 0 host offset and 0 target offset from the new derivation's host platform. These are packages used at run-time to generate code also used at run-time. In practice, that would usually be tools used by compilers for metaprogramming/macro systems, or libraries used by the macros/metaprogramming code itself. It's always preferable to use a depsBuildBuild dependency in the derivation being built than a depsHostHost on the tool doing the building for this purpose. buildInputs A list of dependencies whose host platform and target platform match the new derivation's. This means a 0 host offset and 1 target offset from the new derivation's host platform. This would be called depsHostTarget but for historical continuity. If the dependency doesn't care about the target platform (i.e. isn't a compiler or similar tool), put it here, rather than in depsBuildBuild. These often are programs/libraries used by the new derivation at run-time, but that isn't always the case. For example, the machine code in a statically linked library is only used at run time, but the derivation containing the library is only needed at build time. Even in the dynamic case, the library may also be needed at build time to appease the linker. depsTargetTarget A list of dependencies whose host platform matches the new derivation's target platform. This means a 1 offset from the new derivation's platforms. These are packages that run on the target platform, e.g. the standard library or run-time deps of standard library that a compiler insists on knowing about. It's poor form in almost all cases for a package to depend on another from a future stage [future stage corresponding to positive offset]. Do not use this attribute unless you are packaging a compiler and are sure it is needed. depsBuildBuildPropagated The propagated equivalent of depsBuildBuild. This perhaps never ought to be used, but it is included for consistency [see below for the others]. propagatedNativeBuildInputs The propagated equivalent of nativeBuildInputs. This would be called depsBuildHostPropagated but for historical continuity. For example, if package Y has propagatedNativeBuildInputs = [X], and package Z has buildInputs = [Y], then package Z will be built as if it included package X in its nativeBuildInputs. If instead, package Z has nativeBuildInputs = [Y], then Z will be built as if it included X in the depsBuildBuild of package Z, because of the sum of the two -1 host offsets. depsBuildTargetPropagated The propagated equivalent of depsBuildTarget. This is prefixed for the same reason of alerting potential users. depsHostHostPropagated The propagated equivalent of depsHostHost. propagatedBuildInputs The propagated equivalent of buildInputs. This would be called depsHostTargetPropagated but for historical continuity. depsTargetTarget The propagated equivalent of depsTargetTarget. This is prefixed for the same reason of alerting potential users.
Attributes Variables affecting <literal>stdenv</literal> initialisation NIX_DEBUG A natural number indicating how much information to log. If set to 1 or higher, stdenv will print moderate debug information during the build. In particular, the gcc and ld wrapper scripts will print out the complete command line passed to the wrapped tools. If set to 6 or higher, the stdenv setup script will be run with set -x tracing. If set to 7 or higher, the gcc and ld wrapper scripts will also be run with set -x tracing. Variables affecting build properties enableParallelBuilding If set to true, stdenv will pass specific flags to make and other build tools to enable parallel building with up to build-cores workers. Unless set to false, some build systems with good support for parallel building including cmake, meson, and qmake will set it to true. preferLocalBuild If set, specifies that the package is so lightweight in terms of build operations (e.g. write a text file from a Nix string to the store) that there's no need to look for it in binary caches -- it's faster to just build it locally. It also tells Hydra and other facilities that this package doesn't need to be exported in binary caches (noone would use it, after all). Special variables passthru This is an attribute set which can be filled with arbitrary values. For example: passthru = { foo = "bar"; baz = { value1 = 4; value2 = 5; }; } Values inside it are not passed to the builder, so you can change them without triggering a rebuild. However, they can be accessed outside of a derivation directly, as if they were set inside a derivation itself, e.g. hello.baz.value1. We don't specify any usage or schema of passthru - it is meant for values that would be useful outside the derivation in other parts of a Nix expression (e.g. in other derivations). An example would be to convey some specific dependency of your derivation which contains a program with plugins support. Later, others who make derivations with plugins can use passed-through dependency to ensure that their plugin would be binary-compatible with built program.
Phases The generic builder has a number of phases. Package builds are split into phases to make it easier to override specific parts of the build (e.g., unpacking the sources or installing the binaries). Furthermore, it allows a nicer presentation of build logs in the Nix build farm. Each phase can be overridden in its entirety either by setting the environment variable namePhase to a string containing some shell commands to be executed, or by redefining the shell function namePhase. The former is convenient to override a phase from the derivation, while the latter is convenient from a build script. However, typically one only wants to add some commands to a phase, e.g. by defining postInstall or preFixup, as skipping some of the default actions may have unexpected consequences.
Controlling phases There are a number of variables that control what phases are executed and in what order: Variables affecting phase control phases Specifies the phases. You can change the order in which phases are executed, or add new phases, by setting this variable. If it’s not set, the default value is used, which is $prePhases unpackPhase patchPhase $preConfigurePhases configurePhase $preBuildPhases buildPhase checkPhase $preInstallPhases installPhase fixupPhase $preDistPhases distPhase $postPhases. Usually, if you just want to add a few phases, it’s more convenient to set one of the variables below (such as preInstallPhases), as you then don’t specify all the normal phases. prePhases Additional phases executed before any of the default phases. preConfigurePhases Additional phases executed just before the configure phase. preBuildPhases Additional phases executed just before the build phase. preInstallPhases Additional phases executed just before the install phase. preFixupPhases Additional phases executed just before the fixup phase. preDistPhases Additional phases executed just before the distribution phase. postPhases Additional phases executed after any of the default phases.
The unpack phase The unpack phase is responsible for unpacking the source code of the package. The default implementation of unpackPhase unpacks the source files listed in the src environment variable to the current directory. It supports the following files by default: Tar files These can optionally be compressed using gzip (.tar.gz, .tgz or .tar.Z), bzip2 (.tar.bz2 or .tbz2) or xz (.tar.xz or .tar.lzma). Zip files Zip files are unpacked using unzip. However, unzip is not in the standard environment, so you should add it to buildInputs yourself. Directories in the Nix store These are simply copied to the current directory. The hash part of the file name is stripped, e.g. /nix/store/1wydxgby13cz...-my-sources would be copied to my-sources. Additional file types can be supported by setting the unpackCmd variable (see below). Variables controlling the unpack phase srcs / src The list of source files or directories to be unpacked or copied. One of these must be set. sourceRoot After running unpackPhase, the generic builder changes the current directory to the directory created by unpacking the sources. If there are multiple source directories, you should set sourceRoot to the name of the intended directory. setSourceRoot Alternatively to setting sourceRoot, you can set setSourceRoot to a shell command to be evaluated by the unpack phase after the sources have been unpacked. This command must set sourceRoot. preUnpack Hook executed at the start of the unpack phase. postUnpack Hook executed at the end of the unpack phase. dontMakeSourcesWritable If set to 1, the unpacked sources are not made writable. By default, they are made writable to prevent problems with read-only sources. For example, copied store directories would be read-only without this. unpackCmd The unpack phase evaluates the string $unpackCmd for any unrecognised file. The path to the current source file is contained in the curSrc variable.
The patch phase The patch phase applies the list of patches defined in the patches variable. Variables controlling the patch phase patches The list of patches. They must be in the format accepted by the patch command, and may optionally be compressed using gzip (.gz), bzip2 (.bz2) or xz (.xz). patchFlags Flags to be passed to patch. If not set, the argument is used, which causes the leading directory component to be stripped from the file names in each patch. prePatch Hook executed at the start of the patch phase. postPatch Hook executed at the end of the patch phase.
The configure phase The configure phase prepares the source tree for building. The default configurePhase runs ./configure (typically an Autoconf-generated script) if it exists. Variables controlling the configure phase configureScript The name of the configure script. It defaults to ./configure if it exists; otherwise, the configure phase is skipped. This can actually be a command (like perl ./Configure.pl). configureFlags A list of strings passed as additional arguments to the configure script. configureFlagsArray A shell array containing additional arguments passed to the configure script. You must use this instead of configureFlags if the arguments contain spaces. dontAddPrefix By default, the flag --prefix=$prefix is added to the configure flags. If this is undesirable, set this variable to true. prefix The prefix under which the package must be installed, passed via the option to the configure script. It defaults to . dontAddDisableDepTrack By default, the flag --disable-dependency-tracking is added to the configure flags to speed up Automake-based builds. If this is undesirable, set this variable to true. dontFixLibtool By default, the configure phase applies some special hackery to all files called ltmain.sh before running the configure script in order to improve the purity of Libtool-based packagesIt clears the sys_lib_*search_path variables in the Libtool script to prevent Libtool from using libraries in /usr/lib and such.. If this is undesirable, set this variable to true. dontDisableStatic By default, when the configure script has , the option is added to the configure flags. If this is undesirable, set this variable to true. configurePlatforms By default, when cross compiling, the configure script has and passed. Packages can instead pass [ "build" "host" "target" ] or a subset to control exactly which platform flags are passed. Compilers and other tools should use this to also pass the target platform, for example. Eventually these will be passed when in native builds too, to improve determinism: build-time guessing, as is done today, is a risk of impurity. preConfigure Hook executed at the start of the configure phase. postConfigure Hook executed at the end of the configure phase.
The build phase The build phase is responsible for actually building the package (e.g. compiling it). The default buildPhase simply calls make if a file named Makefile, makefile or GNUmakefile exists in the current directory (or the makefile is explicitly set); otherwise it does nothing. Variables controlling the build phase dontBuild Set to true to skip the build phase. makefile The file name of the Makefile. makeFlags A list of strings passed as additional flags to make. These flags are also used by the default install and check phase. For setting make flags specific to the build phase, use buildFlags (see below). makeFlags = [ "PREFIX=$(out)" ]; The flags are quoted in bash, but environment variables can be specified by using the make syntax. makeFlagsArray A shell array containing additional arguments passed to make. You must use this instead of makeFlags if the arguments contain spaces, e.g. makeFlagsArray=(CFLAGS="-O0 -g" LDFLAGS="-lfoo -lbar") Note that shell arrays cannot be passed through environment variables, so you cannot set makeFlagsArray in a derivation attribute (because those are passed through environment variables): you have to define them in shell code. buildFlags / buildFlagsArray A list of strings passed as additional flags to make. Like makeFlags and makeFlagsArray, but only used by the build phase. preBuild Hook executed at the start of the build phase. postBuild Hook executed at the end of the build phase. You can set flags for make through the makeFlags variable. Before and after running make, the hooks preBuild and postBuild are called, respectively.
The check phase The check phase checks whether the package was built correctly by running its test suite. The default checkPhase calls make check, but only if the doCheck variable is enabled. Variables controlling the check phase doCheck Controls whether the check phase is executed. By default it is skipped, but if doCheck is set to true, the check phase is usually executed. Thus you should set doCheck = true; in the derivation to enable checks. The exception is cross compilation. Cross compiled builds never run tests, no matter how doCheck is set, as the newly-built program won't run on the platform used to build it. makeFlags / makeFlagsArray / makefile See the build phase for details. checkTarget The make target that runs the tests. Defaults to check. checkFlags / checkFlagsArray A list of strings passed as additional flags to make. Like makeFlags and makeFlagsArray, but only used by the check phase. preCheck Hook executed at the start of the check phase. postCheck Hook executed at the end of the check phase.
The install phase The install phase is responsible for installing the package in the Nix store under out. The default installPhase creates the directory $out and calls make install. Variables controlling the install phase makeFlags / makeFlagsArray / makefile See the build phase for details. installTargets The make targets that perform the installation. Defaults to install. Example: installTargets = "install-bin install-doc"; installFlags / installFlagsArray A list of strings passed as additional flags to make. Like makeFlags and makeFlagsArray, but only used by the install phase. preInstall Hook executed at the start of the install phase. postInstall Hook executed at the end of the install phase.
The fixup phase The fixup phase performs some (Nix-specific) post-processing actions on the files installed under $out by the install phase. The default fixupPhase does the following: It moves the man/, doc/ and info/ subdirectories of $out to share/. It strips libraries and executables of debug information. On Linux, it applies the patchelf command to ELF executables and libraries to remove unused directories from the RPATH in order to prevent unnecessary runtime dependencies. It rewrites the interpreter paths of shell scripts to paths found in PATH. E.g., /usr/bin/perl will be rewritten to /nix/store/some-perl/bin/perl found in PATH. Variables controlling the fixup phase dontStrip If set, libraries and executables are not stripped. By default, they are. dontStripHost Like dontStripHost, but only affects the strip command targetting the package's host platform. Useful when supporting cross compilation, but otherwise feel free to ignore. dontStripTarget Like dontStripHost, but only affects the strip command targetting the packages' target platform. Useful when supporting cross compilation, but otherwise feel free to ignore. dontMoveSbin If set, files in $out/sbin are not moved to $out/bin. By default, they are. stripAllList List of directories to search for libraries and executables from which all symbols should be stripped. By default, it’s empty. Stripping all symbols is risky, since it may remove not just debug symbols but also ELF information necessary for normal execution. stripAllFlags Flags passed to the strip command applied to the files in the directories listed in stripAllList. Defaults to (i.e. ). stripDebugList List of directories to search for libraries and executables from which only debugging-related symbols should be stripped. It defaults to lib bin sbin. stripDebugFlags Flags passed to the strip command applied to the files in the directories listed in stripDebugList. Defaults to (i.e. ). dontPatchELF If set, the patchelf command is not used to remove unnecessary RPATH entries. Only applies to Linux. dontPatchShebangs If set, scripts starting with #! do not have their interpreter paths rewritten to paths in the Nix store. forceShare The list of directories that must be moved from $out to $out/share. Defaults to man doc info. setupHook A package can export a setup hook by setting this variable. The setup hook, if defined, is copied to $out/nix-support/setup-hook. Environment variables are then substituted in it using substituteAll. preFixup Hook executed at the start of the fixup phase. postFixup Hook executed at the end of the fixup phase. separateDebugInfo If set to true, the standard environment will enable debug information in C/C++ builds. After installation, the debug information will be separated from the executables and stored in the output named debug. (This output is enabled automatically; you don’t need to set the outputs attribute explicitly.) To be precise, the debug information is stored in debug/lib/debug/.build-id/XX/YYYY…, where XXYYYY… is the build ID of the binary — a SHA-1 hash of the contents of the binary. Debuggers like GDB use the build ID to look up the separated debug information. For example, with GDB, you can add set debug-file-directory ~/.nix-profile/lib/debug to ~/.gdbinit. GDB will then be able to find debug information installed via nix-env -i.
The installCheck phase The installCheck phase checks whether the package was installed correctly by running its test suite against the installed directories. The default installCheck calls make installcheck. Variables controlling the installCheck phase doInstallCheck Controls whether the installCheck phase is executed. By default it is skipped, but if doInstallCheck is set to true, the installCheck phase is usually executed. Thus you should set doInstallCheck = true; in the derivation to enable install checks. The exception is cross compilation. Cross compiled builds never run tests, no matter how doInstallCheck is set, as the newly-built program won't run on the platform used to build it. preInstallCheck Hook executed at the start of the installCheck phase. postInstallCheck Hook executed at the end of the installCheck phase.
The distribution phase The distribution phase is intended to produce a source distribution of the package. The default distPhase first calls make dist, then it copies the resulting source tarballs to $out/tarballs/. This phase is only executed if the attribute doDist is set. Variables controlling the distribution phase distTarget The make target that produces the distribution. Defaults to dist. distFlags / distFlagsArray Additional flags passed to make. tarballs The names of the source distribution files to be copied to $out/tarballs/. It can contain shell wildcards. The default is *.tar.gz. dontCopyDist If set, no files are copied to $out/tarballs/. preDist Hook executed at the start of the distribution phase. postDist Hook executed at the end of the distribution phase.
Shell functions The standard environment provides a number of useful functions. makeWrapper executable wrapperfile args Constructs a wrapper for a program with various possible arguments. For example: # adds `FOOBAR=baz` to `$out/bin/foo`’s environment makeWrapper $out/bin/foo $wrapperfile --set FOOBAR baz # prefixes the binary paths of `hello` and `git` # Be advised that paths often should be patched in directly # (via string replacements or in `configurePhase`). makeWrapper $out/bin/foo $wrapperfile --prefix PATH : ${lib.makeBinPath [ hello git ]} There’s many more kinds of arguments, they are documented in nixpkgs/pkgs/build-support/setup-hooks/make-wrapper.sh. wrapProgram is a convenience function you probably want to use most of the time. substitute infile outfile subs Performs string substitution on the contents of infile, writing the result to outfile. The substitutions in subs are of the following form: s1 s2 Replace every occurrence of the string s1 by s2. varName Replace every occurrence of @varName@ by the contents of the environment variable varName. This is useful for generating files from templates, using @...@ in the template as placeholders. varName s Replace every occurrence of @varName@ by the string s. Example: substitute ./foo.in ./foo.out \ --replace /usr/bin/bar $bar/bin/bar \ --replace "a string containing spaces" "some other text" \ --subst-var someVar substitute is implemented using the replace command. Unlike with the sed command, you don’t have to worry about escaping special characters. It supports performing substitutions on binary files (such as executables), though there you’ll probably want to make sure that the replacement string is as long as the replaced string. substituteInPlace file subs Like substitute, but performs the substitutions in place on the file file. substituteAll infile outfile Replaces every occurrence of @varName@, where varName is any environment variable, in infile, writing the result to outfile. For instance, if infile has the contents #! @bash@/bin/sh PATH=@coreutils@/bin echo @foo@ and the environment contains bash=/nix/store/bmwp0q28cf21...-bash-3.2-p39 and coreutils=/nix/store/68afga4khv0w...-coreutils-6.12, but does not contain the variable foo, then the output will be #! /nix/store/bmwp0q28cf21...-bash-3.2-p39/bin/sh PATH=/nix/store/68afga4khv0w...-coreutils-6.12/bin echo @foo@ That is, no substitution is performed for undefined variables. Environment variables that start with an uppercase letter or an underscore are filtered out, to prevent global variables (like HOME) or private variables (like __ETC_PROFILE_DONE) from accidentally getting substituted. The variables also have to be valid bash “names”, as defined in the bash manpage (alphanumeric or _, must not start with a number). substituteAllInPlace file Like substituteAll, but performs the substitutions in place on the file file. stripHash path Strips the directory and hash part of a store path, outputting the name part to stdout. For example: # prints coreutils-8.24 stripHash "/nix/store/9s9r019176g7cvn2nvcw41gsp862y6b4-coreutils-8.24" If you wish to store the result in another variable, then the following idiom may be useful: name="/nix/store/9s9r019176g7cvn2nvcw41gsp862y6b4-coreutils-8.24" someVar=$(stripHash $name) wrapProgram executable makeWrapperArgs Convenience function for makeWrapper that automatically creates a sane wrapper file It takes all the same arguments as makeWrapper, except for --argv0. It cannot be applied multiple times, since it will overwrite the wrapper file.
Package setup hooks Nix itself considers a build-time dependency merely something that should previously be built and accessible at build time—packages themselves are on their own to perform any additional setup. In most cases, that is fine, and the downstream derivation can deal with it's own dependencies. But for a few common tasks, that would result in almost every package doing the same sort of setup work---depending not on the package itself, but entirely on which dependencies were used. In order to alleviate this burden, the setup hook>mechanism was written, where any package can include a shell script that [by convention rather than enforcement by Nix], any downstream reverse-dependency will source as part of its build process. That allows the downstream dependency to merely specify its dependencies, and lets those dependencies effectively initialize themselves. No boilerplate mirroring the list of dependencies is needed. The Setup hook mechanism is a bit of a sledgehammer though: a powerful feature with a broad and indiscriminate area of effect. The combination of its power and implicit use may be expedient, but isn't without costs. Nix itself is unchanged, but the spirit of adding dependencies being effect-free is violated even if the letter isn't. For example, if a derivation path is mentioned more than once, Nix itself doesn't care and simply makes sure the dependency derivation is already built just the same—depending is just needing something to exist, and needing is idempotent. However, a dependency specified twice will have its setup hook run twice, and that could easily change the build environment (though a well-written setup hook will therefore strive to be idempotent so this is in fact not observable). More broadly, setup hooks are anti-modular in that multiple dependencies, whether the same or different, should not interfere and yet their setup hooks may well do so. The most typical use of the setup hook is actually to add other hooks which are then run (i.e. after all the setup hooks) on each dependency. For example, the C compiler wrapper's setup hook feeds itself flags for each dependency that contains relevant libaries and headers. This is done by defining a bash function, and appending its name to one of envBuildBuildHooks`, envBuildHostHooks`, envBuildTargetHooks`, envHostHostHooks`, envHostTargetHooks`, or envTargetTargetHooks`. These 6 bash variables correspond to the 6 sorts of dependencies by platform (there's 12 total but we ignore the propagated/non-propagated axis). Packages adding a hook should not hard code a specific hook, but rather choose a variable relative to how they are included. Returning to the C compiler wrapper example, if it itself is an n dependency, then it only wants to accumulate flags from n + 1 dependencies, as only those ones match the compiler's target platform. The hostOffset variable is defined with the current dependency's host offset targetOffset with its target offset, before it's setup hook is sourced. Additionally, since most environment hooks don't care about the target platform, That means the setup hook can append to the right bash array by doing something like addEnvHooks "$hostOffset" myBashFunction The existence of setups hooks has long been documented and packages inside Nixpkgs are free to use these mechanism. Other packages, however, should not rely on these mechanisms not changing between Nixpkgs versions. Because of the existing issues with this system, there's little benefit from mandating it be stable for any period of time. Here are some packages that provide a setup hook. Since the mechanism is modular, this probably isn't an exhaustive list. Then again, since the mechanism is only to be used as a last resort, it might be. Bintools Wrapper Bintools Wrapper wraps the binary utilities for a bunch of miscellaneous purposes. These are GNU Binutils when targetting Linux, and a mix of cctools and GNU binutils for Darwin. [The "Bintools" name is supposed to be a compromise between "Binutils" and "cctools" not denoting any specific implementation.] Specifically, the underlying bintools package, and a C standard library (glibc or Darwin's libSystem, just for the dynamic loader) are all fed in, and dependency finding, hardening (see below), and purity checks for each are handled by Bintools Wrapper. Packages typically depend on CC Wrapper, which in turn (at run time) depends on Bintools Wrapper. Bintools Wrapper was only just recently split off from CC Wrapper, so the division of labor is still being worked out. For example, it shouldn't care about about the C standard library, but just take a derivation with the dynamic loader (which happens to be the glibc on linux). Dependency finding however is a task both wrappers will continue to need to share, and probably the most important to understand. It is currently accomplished by collecting directories of host-platform dependencies (i.e. buildInputs and nativeBuildInputs) in environment variables. Bintools Wrapper's setup hook causes any lib and lib64 subdirectories to be added to NIX_LDFLAGS. Since CC Wrapper and Bintools Wrapper use the same strategy, most of the Bintools Wrapper code is sparsely commented and refers to CC Wrapper. But CC Wrapper's code, by contrast, has quite lengthy comments. Bintools Wrapper merely cites those, rather than repeating them, to avoid falling out of sync. A final task of the setup hook is defining a number of standard environment variables to tell build systems which executables full-fill which purpose. They are defined to just be the base name of the tools, under the assumption that Bintools Wrapper's binaries will be on the path. Firstly, this helps poorly-written packages, e.g. ones that look for just gcc when CC isn't defined yet clang is to be used. Secondly, this helps packages not get confused when cross-compiling, in which case multiple Bintools Wrappers may simultaneously be in use. Each wrapper targets a single platform, so if binaries for multiple platforms are needed, the underlying binaries must be wrapped multiple times. As this is a property of the wrapper itself, the multiple wrappings are needed whether or not the same underlying binaries can target multiple platforms. BUILD_- and TARGET_-prefixed versions of the normal environment variable are defined for the additional Bintools Wrappers, properly disambiguating them. A problem with this final task is that Bintools Wrapper is honest and defines LD as ld. Most packages, however, firstly use the C compiler for linking, secondly use LD anyways, defining it as the C compiler, and thirdly, only so define LD when it is undefined as a fallback. This triple-threat means Bintools Wrapper will break those packages, as LD is already defined as the actual linker which the package won't override yet doesn't want to use. The workaround is to define, just for the problematic package, LD as the C compiler. A good way to do this would be preConfigure = "LD=$CC". CC Wrapper CC Wrapper wraps a C toolchain for a bunch of miscellaneous purposes. Specifically, a C compiler (GCC or Clang), wrapped binary tools, and a C standard library (glibc or Darwin's libSystem, just for the dynamic loader) are all fed in, and dependency finding, hardening (see below), and purity checks for each are handled by CC Wrapper. Packages typically depend on CC Wrapper, which in turn (at run time) depends on Bintools Wrapper. Dependency finding is undoubtedly the main task of CC Wrapper. This works just like Bintools Wrapper, except that any include subdirectory of any relevant dependency is added to NIX_CFLAGS_COMPILE. The setup hook itself contains some lengthy comments describing the exact convoluted mechanism by which this is accomplished. CC Wrapper also like Bintools Wrapper defines standard environment variables with the names of the tools it wraps, for the same reasons described above. Importantly, while it includes a cc symlink to the c compiler for portability, the CC will be defined using the compiler's "real name" (i.e. gcc or clang). This helps lousy build systems that inspect on the name of the compiler rather than run it. Perl Adds the lib/site_perl subdirectory of each build input to the PERL5LIB environment variable. For instance, if buildInputs contains Perl, then the lib/site_perl subdirectory of each input is added to the PERL5LIB environment variable. Python Adds the lib/${python.libPrefix}/site-packages subdirectory of each build input to the PYTHONPATH environment variable. pkg-config Adds the lib/pkgconfig and share/pkgconfig subdirectories of each build input to the PKG_CONFIG_PATH environment variable. Automake Adds the share/aclocal subdirectory of each build input to the ACLOCAL_PATH environment variable. Autoconf The autoreconfHook derivation adds autoreconfPhase, which runs autoreconf, libtoolize and automake, essentially preparing the configure script in autotools-based builds. libxml2 Adds every file named catalog.xml found under the xml/dtd and xml/xsl subdirectories of each build input to the XML_CATALOG_FILES environment variable. teTeX / TeX Live Adds the share/texmf-nix subdirectory of each build input to the TEXINPUTS environment variable. Qt 4 Sets the QTDIR environment variable to Qt’s path. gdk-pixbuf Exports GDK_PIXBUF_MODULE_FILE environment variable the the builder. Add librsvg package to buildInputs to get svg support. GHC Creates a temporary package database and registers every Haskell build input in it (TODO: how?). GStreamer Adds the GStreamer plugins subdirectory of each build input to the GST_PLUGIN_SYSTEM_PATH_1_0 or GST_PLUGIN_SYSTEM_PATH environment variable. paxctl Defines the paxmark helper for setting per-executable PaX flags on Linux (where it is available by default; on all other platforms, paxmark is a no-op). For example, to disable secure memory protections on the executable foo: postFixup = '' paxmark m $out/bin/foo ''; The m flag is the most common flag and is typically required for applications that employ JIT compilation or otherwise need to execute code generated at run-time. Disabling PaX protections should be considered a last resort: if possible, problematic features should be disabled or patched to work with PaX. autoPatchelfHook This is a special setup hook which helps in packaging proprietary software in that it automatically tries to find missing shared library dependencies of ELF files. All packages within the runtimeDependencies environment variable are unconditionally added to executables, which is useful for programs that use dlopen 3 to load libraries at runtime.
Purity in Nixpkgs [measures taken to prevent dependencies on packages outside the store, and what you can do to prevent them] GCC doesn't search in locations such as /usr/include. In fact, attempts to add such directories through the flag are filtered out. Likewise, the linker (from GNU binutils) doesn't search in standard locations such as /usr/lib. Programs built on Linux are linked against a GNU C Library that likewise doesn't search in the default system locations.
Hardening in Nixpkgs There are flags available to harden packages at compile or link-time. These can be toggled using the stdenv.mkDerivation parameters hardeningDisable and hardeningEnable. Both parameters take a list of flags as strings. The special "all" flag can be passed to hardeningDisable to turn off all hardening. These flags can also be used as environment variables for testing or development purposes. The following flags are enabled by default and might require disabling with hardeningDisable if the program to package is incompatible. format Adds the compiler options. At present, this warns about calls to printf and scanf functions where the format string is not a string literal and there are no format arguments, as in printf(foo);. This may be a security hole if the format string came from untrusted input and contains %n. This needs to be turned off or fixed for errors similar to: /tmp/nix-build-zynaddsubfx-2.5.2.drv-0/zynaddsubfx-2.5.2/src/UI/guimain.cpp:571:28: error: format not a string literal and no format arguments [-Werror=format-security] printf(help_message); ^ cc1plus: some warnings being treated as errors stackprotector Adds the compiler options. This adds safety checks against stack overwrites rendering many potential code injection attacks into aborting situations. In the best case this turns code injection vulnerabilities into denial of service or into non-issues (depending on the application). This needs to be turned off or fixed for errors similar to: bin/blib.a(bios_console.o): In function `bios_handle_cup': /tmp/nix-build-ipxe-20141124-5cbdc41.drv-0/ipxe-5cbdc41/src/arch/i386/firmware/pcbios/bios_console.c:86: undefined reference to `__stack_chk_fail' fortify Adds the compiler options. During code generation the compiler knows a great deal of information about buffer sizes (where possible), and attempts to replace insecure unlimited length buffer function calls with length-limited ones. This is especially useful for old, crufty code. Additionally, format strings in writable memory that contain '%n' are blocked. If an application depends on such a format string, it will need to be worked around. Additionally, some warnings are enabled which might trigger build failures if compiler warnings are treated as errors in the package build. In this case, set to . This needs to be turned off or fixed for errors similar to: malloc.c:404:15: error: return type is an incomplete type malloc.c:410:19: error: storage size of 'ms' isn't known strdup.h:22:1: error: expected identifier or '(' before '__extension__' strsep.c:65:23: error: register name not specified for 'delim' installwatch.c:3751:5: error: conflicting types for '__open_2' fcntl2.h:50:4: error: call to '__open_missing_mode' declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments pic Adds the compiler options. This options adds support for position independent code in shared libraries and thus making ASLR possible. Most notably, the Linux kernel, kernel modules and other code not running in an operating system environment like boot loaders won't build with PIC enabled. The compiler will is most cases complain that PIC is not supported for a specific build. This needs to be turned off or fixed for assembler errors similar to: ccbLfRgg.s: Assembler messages: ccbLfRgg.s:33: Error: missing or invalid displacement expression `private_key_len@GOTOFF' strictoverflow Signed integer overflow is undefined behaviour according to the C standard. If it happens, it is an error in the program as it should check for overflow before it can happen, not afterwards. GCC provides built-in functions to perform arithmetic with overflow checking, which are correct and faster than any custom implementation. As a workaround, the option makes gcc behave as if signed integer overflows were defined. This flag should not trigger any build or runtime errors. relro Adds the linker option. During program load, several ELF memory sections need to be written to by the linker, but can be turned read-only before turning over control to the program. This prevents some GOT (and .dtors) overwrite attacks, but at least the part of the GOT used by the dynamic linker (.got.plt) is still vulnerable. This flag can break dynamic shared object loading. For instance, the module systems of Xorg and OpenCV are incompatible with this flag. In almost all cases the bindnow flag must also be disabled and incompatible programs typically fail with similar errors at runtime. bindnow Adds the linker option. During program load, all dynamic symbols are resolved, allowing for the complete GOT to be marked read-only (due to relro). This prevents GOT overwrite attacks. For very large applications, this can incur some performance loss during initial load while symbols are resolved, but this shouldn't be an issue for daemons. This flag can break dynamic shared object loading. For instance, the module systems of Xorg and PHP are incompatible with this flag. Programs incompatible with this flag often fail at runtime due to missing symbols, like: intel_drv.so: undefined symbol: vgaHWFreeHWRec The following flags are disabled by default and should be enabled with hardeningEnable for packages that take untrusted input like network services. pie Adds the compiler and linker options. Position Independent Executables are needed to take advantage of Address Space Layout Randomization, supported by modern kernel versions. While ASLR can already be enforced for data areas in the stack and heap (brk and mmap), the code areas must be compiled as position-independent. Shared libraries already do this with the pic flag, so they gain ASLR automatically, but binary .text regions need to be build with pie to gain ASLR. When this happens, ROP attacks are much harder since there are no static locations to bounce off of during a memory corruption attack. For more in-depth information on these hardening flags and hardening in general, refer to the Debian Wiki, Ubuntu Wiki, Gentoo Wiki, and the Arch Wiki.