path: root/devices/src/serial.rs

// Copyright 2017 The Chromium OS Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

use std::collections::VecDeque;
use std::io;

use sys_util::{EventFd, Result};

use BusDevice;

const LOOP_SIZE: usize = 0x40;

const DATA: u8 = 0;
const IER: u8 = 1;
const IIR: u8 = 2;
const LCR: u8 = 3;
const MCR: u8 = 4;
const LSR: u8 = 5;
const MSR: u8 = 6;
const SCR: u8 = 7;
const DLAB_LOW: u8 = 0;
const DLAB_HIGH: u8 = 1;

const IER_RECV_BIT: u8 = 0x1;
const IER_THR_BIT: u8 = 0x2;
const IER_FIFO_BITS: u8 = 0x0f;

const IIR_FIFO_BITS: u8 = 0xc0;
const IIR_NONE_BIT: u8 = 0x1;
const IIR_THR_BIT: u8 = 0x2;
const IIR_RECV_BIT: u8 = 0x4;

const LSR_DATA_BIT: u8 = 0x1;
const LSR_EMPTY_BIT: u8 = 0x20;
const LSR_IDLE_BIT: u8 = 0x40;

const MCR_LOOP_BIT: u8 = 0x10;

const DEFAULT_INTERRUPT_IDENTIFICATION: u8 = IIR_NONE_BIT; // no pending interrupt
const DEFAULT_LINE_STATUS: u8 = LSR_EMPTY_BIT | LSR_IDLE_BIT; // THR empty and line is idle
const DEFAULT_LINE_CONTROL: u8 = 0x3; // 8-bits per character
const DEFAULT_MODEM_CONTROL: u8 = 0x8; // Auxiliary output 2
const DEFAULT_MODEM_STATUS: u8 = 0x20 | 0x10 | 0x80; // data ready, clear to send, carrier detect
const DEFAULT_BAUD_DIVISOR: u16 = 12; // 9600 bps

/// Emulates serial COM ports commonly seen on x86 I/O ports 0x3f8/0x2f8/0x3e8/0x2e8.
///
/// This can optionally write the guest's output to a Write trait object. To send input to the
/// guest, use `queue_input_bytes`.
pub struct Serial {
    interrupt_enable: u8,
    interrupt_identification: u8,
    interrupt_evt: EventFd,
    line_control: u8,
    line_status: u8,
    modem_control: u8,
    modem_status: u8,
    scratch: u8,
    baud_divisor: u16,
    in_buffer: VecDeque<u8>,
    out: Option<Box<io::Write + Send>>,
}

impl Serial {
    fn new(interrupt_evt: EventFd, out: Option<Box<io::Write + Send>>) -> Serial {
        Serial {
            interrupt_enable: 0,
            interrupt_identification: DEFAULT_INTERRUPT_IDENTIFICATION,
            interrupt_evt,
            line_control: DEFAULT_LINE_CONTROL,
            line_status: DEFAULT_LINE_STATUS,
            modem_control: DEFAULT_MODEM_CONTROL,
            modem_status: DEFAULT_MODEM_STATUS,
            scratch: 0,
            baud_divisor: DEFAULT_BAUD_DIVISOR,
            in_buffer: VecDeque::new(),
            out,
        }
    }

    /// Constructs a Serial port ready for output.
    pub fn new_out(interrupt_evt: EventFd, out: Box<io::Write + Send>) -> Serial {
        Self::new(interrupt_evt, Some(out))
    }

    /// Constructs a Serial port with no connected output.
    pub fn new_sink(interrupt_evt: EventFd) -> Serial {
        Self::new(interrupt_evt, None)
    }

    /// Queues raw bytes for the guest to read and signals the interrupt if the line status would
    /// change.
    pub fn queue_input_bytes(&mut self, c: &[u8]) -> Result<()> {
        if !self.is_loop() {
            self.in_buffer.extend(c);
            self.recv_data()?;
        }
        Ok(())
    }

    fn is_dlab_set(&self) -> bool {
        (self.line_control & 0x80) != 0
    }

    fn is_recv_intr_enabled(&self) -> bool {
        (self.interrupt_enable & IER_RECV_BIT) != 0
    }

    fn is_thr_intr_enabled(&self) -> bool {
        (self.interrupt_enable & IER_THR_BIT) != 0
    }

    fn is_loop(&self) -> bool {
        (self.modem_control & MCR_LOOP_BIT) != 0
    }

    fn add_intr_bit(&mut self, bit: u8) {
        self.interrupt_identification &= !IIR_NONE_BIT;
        self.interrupt_identification |= bit;
    }

    fn del_intr_bit(&mut self, bit: u8) {
        self.interrupt_identification &= !bit;
        if self.interrupt_identification == 0x0 {
            self.interrupt_identification = IIR_NONE_BIT;
        }
    }

    fn thr_empty(&mut self) -> Result<()> {
        if self.is_thr_intr_enabled() {
            self.add_intr_bit(IIR_THR_BIT);
            self.trigger_interrupt()?
        }
        Ok(())
    }

    fn recv_data(&mut self) -> Result<()> {
        if self.is_recv_intr_enabled() {
            self.add_intr_bit(IIR_RECV_BIT);
            self.trigger_interrupt()?
        }
        self.line_status |= LSR_DATA_BIT;
        Ok(())
    }

    fn trigger_interrupt(&mut self) -> Result<()> {
        self.interrupt_evt.write(1)
    }

    fn iir_reset(&mut self) {
        self.interrupt_identification = DEFAULT_INTERRUPT_IDENTIFICATION;
    }

    fn handle_write(&mut self, offset: u8, v: u8) -> Result<()> {
        match offset as u8 {
            DLAB_LOW if self.is_dlab_set() => {
                self.baud_divisor = (self.baud_divisor & 0xff00) | v as u16
            }
            DLAB_HIGH if self.is_dlab_set() => {
                self.baud_divisor = (self.baud_divisor & 0x00ff) | ((v as u16) << 8)
            }
            DATA => {
                if self.is_loop() {
                    if self.in_buffer.len() < LOOP_SIZE {
                        self.in_buffer.push_back(v);
                        self.recv_data()?;
                    }
                } else {
                    if let Some(out) = self.out.as_mut() {
                        out.write_all(&[v])?;
                        out.flush()?;
                    }
                    self.thr_empty()?;
                }
            }
            IER => self.interrupt_enable = v & IER_FIFO_BITS,
            LCR => self.line_control = v,
            MCR => self.modem_control = v,
            SCR => self.scratch = v,
            _ => {}
        }
        Ok(())
    }
}

impl BusDevice for Serial {
    fn write(&mut self, offset: u64, data: &[u8]) {
        if data.len() != 1 {
            return;
        }

        if let Err(e) = self.handle_write(offset as u8, data[0]) {
            error!("serial failed write: {:?}", e);
        }
    }

    fn read(&mut self, offset: u64, data: &mut [u8]) {
        if data.len() != 1 {
            return;
        }

        data[0] = match offset as u8 {
            DLAB_LOW if self.is_dlab_set() => self.baud_divisor as u8,
            DLAB_HIGH if self.is_dlab_set() => (self.baud_divisor >> 8) as u8,
            DATA => {
                self.del_intr_bit(IIR_RECV_BIT);
                if self.in_buffer.len() <= 1 {
                    self.line_status &= !LSR_DATA_BIT;
                }
                self.in_buffer.pop_front().unwrap_or_default()
            }
            IER => self.interrupt_enable,
            IIR => {
                let v = self.interrupt_identification | IIR_FIFO_BITS;
                self.iir_reset();
                v
            }
            LCR => self.line_control,
            MCR => self.modem_control,
            LSR => self.line_status,
            MSR => self.modem_status,
            SCR => self.scratch,
            _ => 0,
        };
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use std::io;
    use std::sync::Arc;

    use sync::Mutex;

    #[derive(Clone)]
    struct SharedBuffer {
        buf: Arc<Mutex<Vec<u8>>>,
    }

    impl SharedBuffer {
        fn new() -> SharedBuffer {
            SharedBuffer {
                buf: Arc::new(Mutex::new(Vec::new())),
            }
        }
    }

    impl io::Write for SharedBuffer {
        fn write(&mut self, buf: &[u8]) -> io::Result<usize> {
            self.buf.lock().write(buf)
        }
        fn flush(&mut self) -> io::Result<()> {
            self.buf.lock().flush()
        }
    }

    #[test]
    fn serial_output() {
        let intr_evt = EventFd::new().unwrap();
        let serial_out = SharedBuffer::new();

        let mut serial = Serial::new_out(intr_evt, Box::new(serial_out.clone()));

        serial.write(DATA as u64, &['a' as u8]);
        serial.write(DATA as u64, &['b' as u8]);
        serial.write(DATA as u64, &['c' as u8]);
        assert_eq!(
            serial_out.buf.lock().as_slice(),
            &['a' as u8, 'b' as u8, 'c' as u8]
        );
    }

    #[test]
    fn serial_input() {
        let intr_evt = EventFd::new().unwrap();
        let serial_out = SharedBuffer::new();

        let mut serial =
            Serial::new_out(intr_evt.try_clone().unwrap(), Box::new(serial_out.clone()));

        serial.write(IER as u64, &[IER_RECV_BIT]);
        serial
            .queue_input_bytes(&['a' as u8, 'b' as u8, 'c' as u8])
            .unwrap();

        assert_eq!(intr_evt.read(), Ok(1));
        let mut data = [0u8; 1];
        serial.read(DATA as u64, &mut data[..]);
        assert_eq!(data[0], 'a' as u8);
        serial.read(DATA as u64, &mut data[..]);
        assert_eq!(data[0], 'b' as u8);
        serial.read(DATA as u64, &mut data[..]);
        assert_eq!(data[0], 'c' as u8);
    }
}